Supported 125kHz Credentials RapidPROX® Mobile Readers incorporate Bluetooth® 4.0 technology and 125kHz or 13.56mhz technology into one reader. HID® AWID® DSX® Casi/GE Security® Compatible with a variety of smart cards and proximity cards, Honeywell® Indala RapidPROX® Mobile Readers offer a seamless transition JCI® Geoffrey® from standard, unsecured credentials to secure, encrypted, ADI® Continental® mobile access credentials. Northern® AMAG® Economical and flexible, RapidPROX® Mobile Readers are ideal for Continental® IEI/Linear® companies wishing to add a higher level of security and Keyscan® Doorking® convenience for their employees and/or customers. Lenel® Cansec® RapidPROX® Mobile Credentials can also be read from up to 30 Simplex® Alarmlock® AMAG® Cansec® feet away. RapidPROX® Mobile Readers utilize the Security Industry Supported 13.56MHz Credentials Association (SIA™) Open Supervised Device Protocol (OSDP™). MIFARE® Classic ISO 14443 MIFARE DESFire EV1/EV2 The RapidPROX® Mobile Reader line also offers a unique Bluetooth-only Inline Reader that allows any door with a Wiegand reader to be Bluetooth-enabled. This allows for the support of existing credentials in most any wiegand reader card access system. See a complete listing of supported credentials to the right. EQUIPMENT BP2108
Five Year Limited Warranty.
Together with information provided by suppliers and subcontractors,
these devices comply with the requirements and relevant provision of: EU Directive 2011/65/EC.
These RFID proximity readers comply with the essential requirements
and relevant provisions of: EU Directive 2014/53/EC.
These devices comply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference 2125 North 5th Street Hartsville, SC 29550 2AKUW-AV00 2AKUW-AV90 received, including interference that may cause undesired operation. www.id-enhancements.com Bluetooth® Technology Readers
Proximity Augment Technology Single Technology Single Gang Technology Mullion Reader Gang Reader Reader with Pin Entry Reader R11030 R11320 R11325 R11330
Reader Comparison Chart
Mechanical 3.8 x 2.1 x 0.8 in 4.7 x 3.0 x 0.8 in 3.8 x 2.1 x 0.8 in Dimensions 96 x 52 x 21mm 120 x 76 x 21mm 96 x 52 x 21mm Housing Molded polycarbonate/ABS Finish Black, textured, fingerprint resistant Anywhere within Mounting Wall surface or standard US Switchbox 10ft/3M of legacy reader Environmental Operating Temperature -31º - 151ºF (-35º - 66ºC) Suitable for Outdoor Use Humidity 86 +- 3ºF Ingress Protection Rating IP65 (not evaluated by UL) Electrical Voltage +10Vdc to +16Vdc Power is to be provided by a UL294 Listed, Low-Voltage Class 2 Power Limited Supply or Control Panel, capable of 4 hours standby.
Maximum Average Standby
Measured at 10Vdc 25mA 60mA 65mA 60mA Maximum Average Operating Measured at 10Vdc 40mA 73mA 100mA 75mA
Data Voltage Rest >4Vdc / Active <1Vdc
Reader Interface OSDP, Weigand, Clock & Data Weigand, Clock & Data
Indication 1 RGB LED (+RGB LED illuminated keypad to R11325)
Sounder Integral speaker
Read Range Up to 30 ft. (9m) for Bluetooth Certifications