Académique Documents
Professionnel Documents
Culture Documents
QUALITY
• Lawton is the original manufacturer of pre-cut shims with over 35 years experience
• Shim Thicknesses and Tolerances are guaranteed to meet or exceed industry
standards
• Shims are absolutely guaranteed to be flat and uniform in thickness
• Shims are 100% guaranteed to be free of burrs or any sharp edges
SAFETY
• No sharp corners or edges
• No risk of being injured while hand cutting shim stock
• Tabbed design allows safe installation and removal without getting hands and fingers
under motors
GENERAL
• Cut from 304 Stainless Steel stock to prevent rust or corrosion
• Standard thicknesses from .001" to .120"
• Thicker shims available upon request
• Each shim permanently marked with size and thickness for easy identification
• All sizes and thicknesses available in individual packets of 20 shims to replace the
more popular sizes or thicknesses being used from a complete set
• Six sizes will fit motors or generators from 1 to 1000 H.P. of all manufacturers
G SHIMS H SHIMS
7" x 7" x 1 314" Slot 8" x 8" x 2 IN' Slot
..V&~~uw==================
INDUSTRIES, INC.
4353 Pacific Street
Rocklin, CA 95677
FOR THE DISTRIBUTOR NEAREST YOU:
Call Toll Free 1-800-692·2600
FAX 916-624-7898
Monday through Thursday 7:00 a.m. ·5:30 p.m. PST
www.lawtonindustries.com
sa les@lawtonindustries.com