Académique Documents
Professionnel Documents
Culture Documents
4. Trobleshooting
4-1. To forcefully light up the white LED
4-1-1. When using a camera with software version 1.10.0 or earlier
4-1-2. When using a camera with software version 1.11.0 or later
4-2. To confirm the response of the presence sensor
4-3. To record audio when recording a video
4-4. Unsure of administrator user name and/or password
4-5. How to confirm the software version of the camera 2
4-6. To restore the video stopped on the browser
Introduction
-Connecting the camera with the computer via network
and checking the video
Perform the following settings in accordance with the Quick Start
Guide.
Double-click
5. Confirm the video via the web browser.
3
For detail, refer to the Quick Start Guide (included) for the CX600W,
or “Connection” in the Installation Manual (included) for the CX600.
-Enter the administrator user name and password
Enter the administrator user name and the password,
which are required for performing camera settings, etc.
Enter
4
-Changing the user name and password
Make sure to change the administrator user name and password
from the factory setting to secure the security.
1. Click Security.
Click
2. Enter new user name and password in the [Administrator] field of User
and click OK.
Enter new
user name
and password
Click
5
1. Lighting up the white LED linked to the
presence sensor
◆This is a function to light up the white LED when the presence sensor
has reacted in the dark environment.
Presence sensor is a sensor that will detect the change in infrared
emitted from human, animal, and other sources.
Enter
Click
4. Set [White LED] to [Presence sensor] in Execution Condition, and click OK.
Select
[Presence
sensor]
Click
7
Changing the light up time and brightness of
the white LED
The light up time ([Duration]) and brightness ([Illuminator level]* :6←1)
can be set in White LED in Action output.
* It is displayed as [Maximum strength] for the software version 1.10.0 or earlier.
Set the
Illuminator
level
Set the
Duration
Click after
setting
Caution
[Duration] is the duration time after the presence sensor has
stopped reacting.
It will continue to light up while the presence sensor is reacting.
Duration
1 6
Dark Bright
Illuminator level
8
1-2. Checking the operation of the white LED
Confirm that the presence sensor is linked with the white LED. When using
a camera with software version 1.11.0 or later, skip “2.” in the following procedure.
1. Using a handkerchief, etc., so the lens is not touched with hands directly, cover
the lens section of the camera completely so the light will not get in. (If the
room can be darkened, darken the room without performing procedure 1.)
9
Wave hand
2. Sounding an alarm linked to
the presence sensor, etc. (Voice Alert function)
◆ This is the function to sound an alarm from the speaker on the camera
when specific conditions are met.
- Conditions that can be set are as follows.
・ Camera tampering detection
・ Motion detection
・ VMF (Video Motion Filter)
・ Face detection
・ Network disconnection
・ Presence sensor
"SNC audio upload tool" is used to upload the audio file to a camera.
Caution
The downloaded audio file (vof file) can be listened only with "SNC audio
upload tool".
Refer to the step 2 in “2-3. Uploading the sample audio to the camera”
for the listening method.
10
2-3. Uploading the sample audio to the camera
1. Connect the camera with the computer via network and start up.
"SNC audio upload tool".
① Select the check box ✔ of the camera to upload the audio.
② Enter the administrator [UserID]/[Password] of the camera.
③ Click Voice Alert.
③ Click
① Click to specify
③ Check
the audio file.
the audio
② Check ⑤ Click to select
the file name the Voice alert number
11
3. Upload.
① Click [Upload] ( ) to start the upload.
② Confirm that [Succeeded] is displayed in the [Status] field,
and confirm that the file name is reflected at selected Voice alert number.
Refer to the Application Guide regarding how to use and detailed functions
of the audio upload tool.
Application Guide can be downloaded from following URL.
URL: http://www.sony.net/ipela/snc
12
2-4. Changing the setting of the camera
The setting to hear the uploaded audio to the camera when the presence
sensor has reacted is performed here.
3. Confirm that [Enable] for [Audio upload] is checked ✔ in Audio of Video / Audio.
Confirm selected
13
4. Confirm the uploaded [Voice alert number] and the file name
in Voice alert of Action output.
① Confirm Voice
alert number
②Confirm
the file name
①Set to
[Presence sensor]
②Click
Setting is completed if the setting for the audio file playback is changed to
[Presence sensor] after clicking OK.
Wave your hand in front of the camera and confirm that the sound is heard.
Caution
・Setting for a separate action input is required when setting the execution condition
to anything other than [Presence sensor]. Refer to “Setting the Camera
tampering detection/Motion detection” in the User Guide for detail.
・ Setting for a separate action input is required when combining various
14
execution conditions. Refer to “Setting the Camera tampering
detection/Motion detection” in the User Guide for detail.
Setting the repeat number and volume of the audio
Set the
repeat
number
Click
after
setting
2. Set the volume
Set the
volume
Click after
setting
15
3. Recording a Video on microSD
(Edge Storage function)
3-1. Preparing the microSD
About the microSD card that can be used with the camera
・ SDHC card compatible with Class 10
・ Operation guarantee temperature: 85˚C or higher
Operation is not guaranteed for all the microSD that will fulfill above
requirements.
Recommended microSD
・SanDisk Extreme Series microSD(operation confirmed)
16
3-1-1. When using a camera with software version 1.10.0 or earlier
1. Format the microSD to be used.
①. Download the installer for “SD Formatter” from the SD Association Web site.
URL: https://www.sdcard.org/home
②. Install “SD Formatter” into the computer.
③. Read the microSD on the computer, start up “SD Formatter,” and click Format.
Click
2. Insert the microSD into the camera while the power of the camera
is turned off.
microSD
17
3-1-2. When using a camera with software version 1.11.0 or later
1. Insert the microSD into the camera while the power of the camera
is turned off.
microSD
2. Turn on the power of the camera, access the camera from the Web browser, and
click Setting in the main menu.
Click
18
3. Click Initialize in System
Click
Click
Set to Off
19
3-2. Setting the clock on the camera
Enter
Set to
[Synchronize
with PC]
Select
appropriate
time zone
Click
Set the [Time setting] in Date & Time of System to [Manual setting],
select appropriate date/time, and click OK.
Set to
[Manual
setting]
Select
appropriate
time zone
Click
21
3-3. Changing the setting of the camera
Enter
22
3. Click Video codec in Video / Audio,
perform the following (recommended) settings, and click [OK].
There are some restrictions when performing a setting other than above.
Download the “Edge Storage Manual” from the following URL,
and make sure to read it.
URL: http://www.sony.net/ipela/snc
23
4. Open Schedule and check that [Always] is selected ✔ for [Edge Storage movie].
Select
24
5. Confirm and set the following items in Edge Storage of Action output
and click OK.
①
②
Click after
setting
25
6. In Execution Condition of Action output, set [Edge Storage movie] to
[Time triggered execution], and click OK.
① Click
② Set to
[Time
triggered
execution]
③ Click
26
3-3-2. When performing event recording
The setting to record a video for a specified period when the presence sensor
has reacted is performed here.
2. In Edge Storage of Action output, confirm and set the following items
and click OK.
① SD memory card Confirm the available space of the microSD
② Overwrite Place a check mark ✔ .
③ Recording target Select [Image 1].
④ Pre-alarm period 10 s
⑤ Post-alarm period 600 s
①
②
④
⑤
Click after 27
setting
3. In Execution Condition of Action output, set [Edge Storage movie] to
[Presence sensor], and click OK.
Set to
[Presence
sensor]
Click
28
3-3-2-2. Setting a multiple event recording
The setting for setting multiple event conditions and recording a video
for a specified period when the conditions are met is performed here.
2. Open Event condition in Action input, set as a desired condition, and click OK.
Example: When the recording of video is to start when the presence sensor
or the motion detection has reacted
① Event condition 1 1 or 2
② 1 Presence sensor
③ 2 Motion detection
①
②
③
Always set the event conditions other than the presence sensor.
Refer to “Setting the Camera tampering detection/Motion detection”
of the User Guide for detailed setting method.
30
5. Open Execution Condition in Action output, set the setting for
[Edge Storage movie] to [Event condition 1], and click OK.
31
3-4. Playing back/saving/deleting the recorded video
Playback/save/delete is set in the Play back window.
Click
Search
panel
List
panel
Control
panel
32
3-4. Playing back/saving/deleting the recorded video
1. Specify the search period in the [Search] panel and click Search.
Click
2. Select the video to play back after the search result is displayed
in the [List] panel, and click playback ( ) in the [Control] panel.
①Select
② Click
[Control](detail)panel
33
3-4. Playing back/saving/deleting the recorded video
1. Select the video to save from the [List] panel and click Export.
Click
① Specify the
range to cut
②Click
34
3-4. Playing back/saving/deleting the recorded video
1. Select the video in the [List] panel and click Delete.
Click
Enter
Click
Click
Click
35
4.Troubleshooting
4-1. To forcefully light up the white LED
This is a function to forcefully light up the white LED regardless of the presence
sensor or the ambient brightness of the environment.
Please note that the procedure is different depending on the software version
of the camera.
3. It will light up when the administrator user name and password are entered.
Once the check is completed, turn it off by entering the following URL
in the address bar and pressing the Enter key.
36
http://XX.XX.XX.XX/command/light.cgi?LightManual=off
4-1-2. When using a camera with software version 1.11.0 or later
Click
Click
37
4-2. To confirm the response of the presence sensor
1. Click Setting in the main menu.
Click
38
4. Place a check mark in the check box ✔ and set [Type] to [Event].
Select ✔
Set to
[Event]
Set to
[Presence
sensor]
Click
6. “Presence Sensor” is displayed for the set time when returned to Live
and the presence sensor is detecting.
Click
This is
displayed
when the
presence
sensor is
reacting
Caution The display may disappear after specified time has elapsed
39
even if the presence sensor is still reacting.
4-3. To record audio when recording a video
Perform following setting before performing “3-3. Changing the setting
of the camera . ”
③
Select ✔
④ Click
40
3. Place a check mark ✔ in the audio to be recorded in Edge Storage
of Action output and click OK.
Select ✔
Click after
setting
41
4-4. Unsure of administrator user name and/or password
It is possible to return the administrator user name and password back to
the initial setting by performing the initialization of the camera when you have
forgotten the administrator user name and/or password. Read the
“Initializing this unit” in the Quick Start Guide or
“Basic Operations of the Administrator Menu” in the User Guide
for initial setting of the administrator user name and password.
2. Perform reset.
① Using a narrow tipped object, press the reset switch and simultaneously
connect the AC adapter to the power supply input terminal.
(* Connect the network cable to the network cable for the CX600 model)
AC adapter
Reset switch
②
[Front side] Confirm the lighting condition of each indicator.
POWER NETWORK
indicator indicator
3. Initialization will complete in a few minutes and the POWER indicator will
light up in green.
② ②
* If the video does not appear even after refreshing, turn off the power of the
camera and turn it on again to reconnect the camera.
* If the video stops frequently under the environment where the camera is
connected wirelessly, try the following measures.
(1) If the router has the auto update function of wireless channels,
turn it OFF.
If this function is set to Auto or ON, the radio wave may be shut off
momentarily.
44