Académique Documents
Professionnel Documents
Culture Documents
PUNCHING MACHINES
RP & TP SERIES
DURMA
charlotte NC
RP + TP Series
turret punches
lengths tonnage
[ 49" x 78" ] [ 49" x 100" ] [ 60” x 120” ] 22/33 Tons
RP TP
Indexable Multi-Tools
3,6,8 and station indexable multi-tools reduce tool changes and
increase flexibility. Programmable to .02° with no upper and
lower mechanical connections provides perfect alignment of the
upper and lower tool. Even defects or worn tools can be offset.
All dies are positioned below the table surface preventing marking of the sheet. Micro tags can be reduced to minimum for more precise
parts.
standard features
Stress Relieved
Bridge Frame Construction
Finite element analysis is on high performance computers is
used in the design process. The concept consists of two fully
enclosed box fabrications that are welded put under high
load and stress relieved. The result is reduced vibration and
deflection under full loads providing greater part precision,
reduced tool wear, and noise reduction.
Rotational Head
RP Series
The full 360° programmable head achieves 40
revolution per minute. A harmonic zero backlash gear
driven system provides accurate positioning and control.
Loading and unloading is easily integrated in to our Durma punching machines. These systems have many advantages which include but are
not limited to reduced operator fatigue, increasted operator safety and increased production efficiency. Tower storage can also be added to
further enhance production.
RP + TP Series
control
Siemens 840 Dsi Series CNC Control
Durma has chosen the very powerful Siemens 840 DsI CNC
Control, which has been specially designed for punching. Some
of the features are:
X Axis Range (± Reposition) 78° 78° 98° 98° 120° 120° 98°
Y Axis Range 49° 49° 49° 49° 60° 60° 50°
Indexable Multi Tools 0 0 3 3 3 3 3
Automatic Repositionings 3
Simultaneous Speed (IPM) 4,525 3,573 4,525 3,930 4,525 3,573 4,922
SPM (.040” pitch / .040 Thich) 900 600 900 600 900 600 1,200
SPM (1” Pitch / .040 Thick) 350 300 300 250 300 250 400
Marking Speed 1,200 850 1,200 1,200 1,200 900 1,200
Forming Yes
Tapping No No Yes Yes Yes Yes Yes
Wheel No No Yes Yes Yes Yes Yes
Turret Configuration 11A-10B-1C-2D 11A-11B-2C-1D
2B-1C Indexable 3D (3.5”) Indexable
Positioning Accuracy ±0.004
Repeat Accuracy ±0.002
Programmable Sheet Clamps 2 2 3 3 3 3 3
turret punches
Rp series
RP6 RP9