Vous êtes sur la page 1sur 18

Mobicom Telematics – G102 User Guide

G102 User Guide


V2.3
Revision Date: 06/15/2018

Shenzhen Mobicom Telematics Co.,Ltd Tel: + 86 755 8450 8126


RM602,Xichuangcheng,No.144,Zhiwuyuan Road, Email: sales@mobicomtracking.com
Longgang District, Shenzhen,China Website: http://www.mobicomtracking.com

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 1 / 18


Mobicom Telematics – G102 User Guide

Contents
Contents ....................................................................................................................................................................... 2
1 Copyright and Disclaimer .......................................................................................................................................... 3
2 Product Overview ..................................................................................................................................................... 3
3 Product Functions ..................................................................................................................................................... 4
4 Specifications ............................................................................................................................................................ 5
5 Standard Package and Optional Accessories ............................................................................................................ 6
6 Appearance and Structure ........................................................................................................................................ 7
7 First Use .................................................................................................................................................................... 8
7.1 Insert SIM Card .............................................................................................................................................. 8
7.2 Power on the device ...................................................................................................................................... 9
7.3 LED light Indicators ...................................................................................................................................... 10
7.4 Initializing Device Parameters via SMS command ....................................................................................... 10
8 Tracking the device in Mobicom GPS system .......................................................................................................... 12
8.1 Principle of communication ......................................................................................................................... 12
8.2 Get the login ID ............................................................................................................................................ 12
8.3 Login Software Platform .............................................................................................................................. 12
9 Installing Device in Vehicle...................................................................................................................................... 13
9.1 Wire harness definition................................................................................................................................ 14
9.2 Connect the Power wires ............................................................................................................................. 15
9.3 Connect Digital Input –Ignition .................................................................................................................... 15
9.4 Connect Digital Input –SOS button .............................................................................................................. 16
9.5 Connect Digital Output –OUT1-Fuel pump control ..................................................................................... 16
9.6 Mounting the device .................................................................................................................................... 16
10 Warranty Terms..................................................................................................................................................... 17
Contact Us .................................................................................................................................................................. 18

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 2 / 18


Mobicom Telematics – G102 User Guide

1 Copyright and Disclaimer

Copyright © 2018 Mobicom Telematics Co.,Ltd All rights reserved. Reproduction, transfer, distribution

or storage of part or all of the contents in this document in any form without the prior written permission

of Mobicom Telematics is prohibited.

All contents in this manual are accurate, however, with continuous research and development, we

might update the manual from time to time. The manual which you are reading is reflecting of present

state of art of the products described therein, we have endeavored to give a description that is as

complete and clear as possible in order to make it easy for you to use our products. There might be

some contents described inaccurate technical expression, with the rapid development of technology,

we reserve the rights to incorporate technical alterations and developments without separate notice in

advance.

Mobicom Telematics is not liable for any loss or injury caused by using or referencing to any products.

2 Product Overview

The G102 is a Mini GPS tracker designed for a wide range of vehicle tracking application. It has baisc

I/O interfaces that can be used for GPS vehicle tracking. It’s internal GPS antenna has superior

sensitivity and fast time to be located. It can be monitored in real time or periodically tracked by a

backend server and mobile devices.

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 3 / 18


Mobicom Telematics – G102 User Guide

3 Product Functions

Items Functions

Communication Location Data transmitting-GPRS(TCP/UDP)

Commands- SMS/GPRS/Serial port

Real time location monitoring/querying

Track by moving( time interval)

Position Tracking Track by parking(time interval)

Track by distance

Cornering report

GPS Mileage GPS Mileage report/GPS mileage coefficient adjustable

Geo-fence 25 rectangle Geo-fences

SOS alarm (SMS/GRPS)

Main Power supply cut off(SMS/GRPS)

Ignition On report(GPRS)

Over Speed alarm(GPRS)


Alarm(Event)
Geo-fence alarm(GPRS)

Towing alarm(GPRS)

Harsh Braking alarm(GPRS)

Harsh Acceleration alarm(GPRS)

I/O 3 digital input (Ignition detecting, SOS button,Input3-reserved)

1 digital output- fuel pump /engine circuit cut

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 4 / 18


Mobicom Telematics – G102 User Guide

Buffer Data in Buffer when in GPRS blind area

Initialization Initialize tracker’s Parameters via SMS/GPRS/Serial port

Upgrading upgrading firmware via OTA or Serial port

Waterproof IP66

4 Specifications

Items Specifications

Gift Box Dimension 120*120*50mm

Tracker Dimension 66*60*25 mm

Tracker Color Black

Weight Tracker weight 0.1kg Total package 0.21kg

Power Supply DC 9V -- 55V

Working current 40 mA(DC 12V)

Back-up battery Built-in 160mAh, support 1 hour working when fully charged.

(160 to 450mAh customized)

Operating temperature -25℃ -- 75℃

Operating humidity 5% -- 95%

LED indicator Green led and Red led light indicates GPS and GSM status

respectively

Power Switch 1 Backup battery switch on Mainboard

I/O Port 3 digital inputs Ignition detecting –positive trigger

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 5 / 18


Mobicom Telematics – G102 User Guide

SOS detecting-negative trigger

Input3 (Reserved)- positive trigger

1 digital output Fuel pump/engine circuit cut- Output

GND (connect to a normal close relay)

Chipset FIBOCOM G510


GSM Module
Frequency 850MHz/900MHz/1800MHz/1900 MHz

Chipset SKYLAB SKG12BL

Positioning < 5m (95%)

accuracy

Cold start time < 23s(in average)

GPS Module Warm start time < 3 s (in average)

Acquisition -148dbm

Sensitivity

Acquisition channel 66-channel

GPS Frequency 1575.42 MHz

5 Standard Package and Optional Accessories

Name Picture Standard/Optional Parts

Main unit Standard

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 6 / 18


Mobicom Telematics – G102 User Guide

Wire harness Standard

Magic tape Standard

Relay Standard

SOS button Standard

Mini-USB Configuration Optional

cable

6 Appearance and Structure

Side View

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 7 / 18


Mobicom Telematics – G102 User Guide

Internal View

Internal View Reverse

7 First Use

7.1 Insert SIM Card

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 8 / 18


Mobicom Telematics – G102 User Guide

Operation Steps:

 Open the Case by tweezers, Pull out the mainboard from the case.

 Open the SIM card slot

 Insert the Mini(Standard) SIM card into the card slot with its gold-plated contacts facing towards the

Printed Circuit Board (PCB)

 Slide the SIM card holder to the right to lock it in place

 Do not forget to turn on the battery switch before putting the mainboard back in its metal casing.

 Ensure that SIM card’s SMS/GPRS Network service are available .

 Ensure that the phone card PIN lock has been closed properly.

 The backup battery can be charged when connected External Power supply.

7.2 Power on the device

Connect the Power cable(red) and ground wire(black) to the positive and negative electrodes of the

vehicle battery respectively.

 Detailed wire harness definition .Refer to 9.1 wire harness definition

 If you tested G102 device at office, It’s better use the AC to DC Power supply as

below picture:

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 9 / 18


Mobicom Telematics – G102 User Guide

7.3 LED light Indicators

ON/OFF Indication
LED Light Description
Light On Light Off
Off GPS valid, Position get fixed
Green Blinking every 1 sec Searching GPS signal
Blinking every 0.5 sec Initializing
Red Blinking every 1sec Searching for GPRS Network
Off Connected to GPRS Network

Note: To get a good effect of GPS signal in vehicle installation, please let the Internal

GPS antenna side face to SKY horizontally as below picture:

7.4 Initializing Device Parameters via SMS command

G102 can be configured via SMS. Refer to the command list as below:

No. Function Name SMS Command Content Reponse from G102 Description

Set the authorized *SPJLX*P:753869*S:13012345678 XXX,XXX,XXX, set ok (max: 3 phone numbers)

SIM number ,13112345678,13212345678,#


1

Set server IP/Port *SPJLX*P:753869*U:211.153.134. Reply content is “IP” “Port”, Server IP

122,6666,1,# Address:211.153.134.122 Port:6666


Transfer type: 0: UDP 1: TCP
2
Note:
Please get Server IP and Port from Mobicom
Technical support engineer.
*SPJLX*P:753869*A:CMNET,USE if no user name and password.the SMS
3 Set APN
R,PWD# is: *SPJLX*P:753869*A:CMNET,,#

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 10 / 18


Mobicom Telematics – G102 User Guide
CMNET is china mobile’s APN,

USER is for user name for APN,

PWD is for password.

Setup upload 30means when vehicle moving


4 *SPJLX*P:753869*E:1,30,60#
interval 60 means when vehicle parking

U means UDP,if it is T means TCP mode

upload; 120.31.131.86 is current IP; 9903 is

port; A: after this is current APN, 13636443048 is

current ID of tracker(136 is a fixed head,the ID is

just last 8digits)

M4 means GSM modem status, 4 means GPRS

online.

N10 means the uploading interval when moving is

*T:120.31.131.86,9903 10seconds, F300 means uploading interval when

*A:cmnet,,*N:13636443 parking is 300seconds;

*CKJLX# 048,M4,N10,F300,D100 C0 means uploading mode according to corner


5 State query
0,C0,R1,Q27,G4,1,T0,E change.,not activated.

1,G102P v1.21@Mar R1 is GSM registration state;

24 2016 Q27 is GSM modem signal value, 24, if you need

GPRS online, the value should be more than 10.

G4,1 is available satellite number 4, 1 means

located, 0 means not located;

IF IT IS : G255,0, that means no GPS signal ,0

means NOT LOCATED.

T0 means GMT+0 TIME zone, T8 is GMT+8

E1 means ACC ON, If it is E0 means ACC OFF;

G102P v1.21@Mar 24 2016, is firmware version.

Position query *WHERE2# http://maps.google.com/ if can’t get GPS signal after received the

6 maps?hl=en&q=+22.59 command within 5 Min, reply “Check Location

303,+113.87110 Fail”

7 Cut fuel pump *SPJLX*P:753869*D:O21#

8 Recover fuel *SPJLX*P:753869*D:O20#

9 Restart Device *SPJLX*P:753869*B:# Device restart

All parameters recover to factory, except


10 Factory set *SPJLX*P:753869*B:88#
IP/Port/ID/APN

Upgrade by OTA *SPJLX*P:753869*R:202.71.144.2 Note:

10,11909# IP should the upgrade server IP address.


11
202.71.144.210 is IP,11909 is PORT

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 11 / 18


Mobicom Telematics – G102 User Guide

8 Tracking the device in Mobicom GPS system

8.1 Principle of communication

The G102 device doesn’t like GPS navigator, it can’t work independently and must be working with a

GPS tracking system.

8.2 Get the login ID

Please get the Login ID of GPS tracking system from Platform providers(Mobicom sales) , and

Monitor the tracker’s current location and other information.

8.3 Login Software Platform

Please get the Web App link / PC based software / Android/IOS App and Manuals from Mobicom

sales or other Platform Providers , and manage your vehicles and trackers in the software Platform.

Mobicom Web App link:

http://13.228.118.160:8080/login/

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 12 / 18


Mobicom Telematics – G102 User Guide

Login Interface as below:

Main Interface as below:

9 Installing Device in Vehicle

Warning: Connecting the wire inputs can be hazardous to both the installer and your

vehicle’s electrical system if not done by an experienced installer. This document

assumes you are aware of the inherent dangers of working in and around a vehicle and

have a working understanding of electricity.

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 13 / 18


Mobicom Telematics – G102 User Guide

9.1 Wire harness definition

Pin No. Pin Name Wire Color Description

1 PWR Red DC 9V-55V(Standard 12/24 V)

2 GND Black Ground

3 Ignition(ACC) White Digital Input (Positive Triggered for Ignition

Detected )

Positive trigger:

Valid: Voltage input>6.2V

Invalid: Voltage input<4V

4 OUT1 Yellow Digital Negative Output (For controlling

Fuel pump circuit)

Valid: low level (0 V)

Invalid: open collector

Maximum voltage for output open collector (invalid): 45 V

Maximum current for output low voltage (valid): 500 mA

Connect to an external relay to remotely cut off the vehicle

fuel cable or engine power supply.

5 SOS button Blue Digital Input (Negative Triggered for SOS

Detected)

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 14 / 18


Mobicom Telematics – G102 User Guide
Negative Trigger:

Valid: Voltage input<0.7V

Invalid: Voltage input>4V

6 INPUT 3 Brown Positive Trigger-Reserved

Positive trigger:

Valid: Voltage input>6.2V

Invalid: Voltage input<4V

9.2 Connect the Power wires

Connect the power cable (red) and ground wire (black) to the positive and negative electrodes of

the vehicle battery respectively.

9.3 Connect Digital Input –Ignition

Please find the signal wire near vehicle’s steering wheel which can indicate Ignition On/Off status,

and then connect to it. Input3 connection as the same. Actually ,No need connect tracker’s Ignition

detecting wire to vehicle’s real Ignition wire. Below picture shows the Ignition structure of vehicle.

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 15 / 18


Mobicom Telematics – G102 User Guide

9.4 Connect Digital Input –SOS button

9.5 Connect Digital Output –OUT1-Fuel pump control

Note: Please use 12/24V DC normal close relay when cut the fuel pump circuit.

Whether use 12V or 24V relay depends on the vehicle battery voltage(Truck 24V ,Car

12 V).

9.6 Mounting the device

Install the device in around dashboard or under windshield .Make sure there is no metal cover or

water inside. Meanwhile check with your technical engineer ,confirm that the device is online and

GPS positioning in the GPS tracking system. Below picture shows the installation position in small

car.

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 16 / 18


Mobicom Telematics – G102 User Guide

Note: Tint with metallic content may affect the signal reception. Change installation

area to receive better signal. To get a good effect of GPS signal in vehicle installation,

please let the Internal GPS antenna side face to SKY horizontally as below picture:

10 Warranty Terms

 The warranty period will be 24 months from the delivery date, the warranty shall not apply to

any defect, failure or damage caused by improper use, disassembled and alteration without

authorization.

 Our obligations are limited to repair of the defect or replacement the defective part or at its

discretion replacement of the product itself.

 Repair or replacement under the terms of this warranty does not provide right to extension or

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 17 / 18


Mobicom Telematics – G102 User Guide

renewal of the warranty period.

 The warranty is not applicable to cases other than defects in material, design and

workmanship.

Contact Us

Shenzhen Mobicom Telematics Co.,Ltd

RM602,Xichuangcheng,No.144,Zhiwuyuan Road, Longgang District, Shenzhen,China

Telephone number: +86 755 8450 8126

Email address: support@mobicomtracking.com

Website: http://www.mobicomtracking.com

Copyright © 2018 Shenzhen Mobicom Telematics Co.,Ltd. 18 / 18

Vous aimerez peut-être aussi