Vous êtes sur la page 1sur 4

Error!

Unknown
document property
name.

Author Cao Le Employee ID 00742329


Singapore Rep Office
Department Product RNP&RNO
NTS
2012-04-02 Product ERAN:V2R12SPH508
Date
Information ENodeB:V2R12SPC300
Approver
Title: Adaptive MIMO Transmission Mode in LTE
Phenomena When we were performing sigle site verification test, one site experiences low downlink throughput at
Description: cell center with good RSRP and good SINR.
Alarm None
Information:
Reason
System configuraton:
Analysis:
Frequency Band 1.8G, 10MHz BW, PDCCH symbol=adaptive, OL adaptive 2X2 MIMO,

Power=20W*2. Based on the contract, it is supposed to achieve Peak Downlink Throughput

around 60Mbps, but only around 30Mbps can be achieved at cell center with RSRP=-70dbm and

RS-SINR=28db.

There are quite a lot of factors which may affect the peak download throughput.

1. The number of OFDMA symbols mapping to PDCCH

2. Rank number or Transmission Mode (Spatial Multiplexing (SM) or Spatial Frequcy

Block Code (SFBC))

3. The number of scheduled RB

4. The MCS order

5. Block error rate (BLER)

Thus, need to have a look at the factors one by one. After checking the RRCConnectionSetup

message, it is found that the transmssion mode did not change from TM2 (SFBC) to TM3 (SM)

adaptively when the RF signal is good enough.


Handling
This is the RRC Connection setup message for the faulty site.
Process

2016-02-18 HUAWEI Confidential Page1, Total4


Error! Unknown
document property
name.

No TM 3 Transmission is reconfigurated in the RRC ConnectionRecongifuration message for this

faulty site.

Compare the RRC Connection setup message for one normal sites.

2016-02-18 HUAWEI Confidential Page2, Total4


Error! Unknown
document property
name.

TM 3 Transmission is reconfigurated in the RRC ConnectionRecongifuration message for one

normal site.

Send our wireless team to access the site and check the antenna and feeder installation.

Suggestion and
After checking, it is found that there is cross-feeder problem.. One feeder from antenna of cell A
Summary:
port A is connected to the RRU of Cell B. After correction the installation problem, the downlink

throughput goes to normal.


Attachment:
References: None
2016-02-18 HUAWEI Confidential Page3, Total4
Error! Unknown
document property
name.

2016-02-18 HUAWEI Confidential Page4, Total4

Vous aimerez peut-être aussi