Académique Documents
Professionnel Documents
Culture Documents
Specification Index
1
Country Index
2
PPG Aerospace, Global Military Coatings
Waterborne Primers
Table 1
Product Code Country Specification Type Class Mix Ratio VOC g/L Description
EWDE072A/B USA D-12-003-001/SF-001 I C2 4:1 <340 Green strontium chromate epoxy primer.
Mil-PRF-85582
EWDY048A/B USA Mil-PRF-85582 I N 3:1 <340 Yellow chrome-free epoxy primer.
EWDE102A/B USA Mil-PRF-85582 II C2 <340 Dark green strontium chromate epoxy primer.
EWAE118A/B USA Mil-PRF-85582 II N <340 Dark green chrome-free epoxy primer.
CA 7040 UK Def Stan 80-206/2 None None 1:1 <250 Chromate-free, low VOC epoxy coating
for ferrous metals.
CA 7014 UK Def Stan 80-207 None None 1:1 <250 Chromated low VOC epoxy coating.
CA 7041 UK Def Stan 80-207/2 None None 1:1 <250 Chromated low VOC epoxy coating.
515X386 USA Mil-PRF-85582 II C2 <340 Dark green chromated.
513X408B USA Mil-PRF-85582 I C2 3:1 <340 Yellow chromated.
Solventborne Primers
Table 2
Product Code Country Specification Type Class Mix Ratio VOC g/L Description
EEAY051A USA Mil-PRF-23377 I C 3:1 <340 Yellow strontium chromate epoxy primer.
EEAE154A USA Mil-PRF-23377 I C 3:1 <340 Green strontium chromate epoxy primer.
515X410 USA Mil-PRF-23377 II C <340 Chromate epoxy primer.
CA 7233 USA Mil-PRF-23377 I C 1:1 <340 Strontium chromate epoxy primer.
2 hour overcoat time/4+ hour pot life.
CA 7255 USA Mil-PRF-23377 II C <340 Strontium chromate epoxy primer.
2 hour overcoat time/4+ hour pot life.
533K004 USA DMS-2104 I None 3:1 <340 High solids primer for use under DMS-2115E topcoat.
PR205/ACT205 UK B52X33B 2 None <350 Chromated epoxy, low VOC.
SP-J-513-A-0016
CA 7012/CA 7012B UK SP-J-513-A-0013 2 None <350 Chromate free epoxy, low VOC.
Celopox™ 2000SC France DAT 8010X0003 None None 1:1 600+ Conventional solids, chromate-free epoxy coating.
For use under PU88 topcoat by the French MOD.
7835 France DTD 55555 67 None None 1:1 600+ Strontium chromate epoxy coating for use on exterior
Dassault parts under PU66 or PU88 topcoats.
Aerospatiale
Eurocopter
PAC 33 France, UK Airbus A 007 10113 None None 5:1:4-5 600+ Zinc chromate polyurethane primer for internal and
A 007 10118 external parts or fuel tanks. Can be used
A 007 10112 directly over alodine or over P99 wash primer for
AFS 1355C anodized surfaces. Can be used under Desothane®
Rolls Royce RPS 511 HS topcoat or PU66 topcoat.
Approved for use at
Dassault
5809-1011 Germany WL 5.7139 None None 5:1 600+ Chromate-free, conventional solids, epoxy primer.
Similar to Mil-P-53022
N 53565/RAL6013 Germany WL5.7011 None None 4:1 600+ Chromated, conventional solids, epoxy primer.
3
Conductive Primer
Table 3
Product Code Country Specification Mix Ratio VOC g/L Description
4332/2928 Type I USA DA 4.653.93 5:1:2.4 600+ Black, sandable, anti-static epoxy coating. Resistivity of 1.5 to 25 kilohm.
NT 10106 Type I
WL 5.7030
519X303 USA CPW-268 None 3:1:2 600+ Blue-green aluminized chromated epoxy primer for use under
MMS-425B None 529K002. System service temperature is –65°F to 450°F
MMS-436 None (-54°C to 242°C).
BPS 299-947-167 II
EEAE152 Canada CPW-619 None 3:1 <340 Epoxy primer for use under CPW-269 topcoat. Product service
temperature is –60°F to 400°F (-51°C to 204°C).
825-009 USA DPM-5893 None 4:1:4 600+ Green aluminized polyurethane coating for use with 529K002.
System service temperature is –65°F to 450°F (-54°C to 242°C).
For use under 529K002 or over 519X303.
Korotherm® USA MMS-455 None 4:1 <100 Polyurethane coating with service temperatures of –65°F to 500°F
821X404 MS-455 (-54°C to 261°C) above which the coating intumesces.
825X537 USA MS-133 None 4:1:4 600+ Fluid and corrosion resistant polyurethane primer.
Service temperature –65°F to 450°F (-54°C to 242°C).
Elastometric Primers
Table 5
Product Code Country Specification Type Class Mix Ratio VOC g/L Description
PR-1432GV USA TO 1-1-8 None C2 10:1 <300 Two-component, sprayable, elastomeric, polysulfide with
dichromate cure. VOC compliant version of PR-1432GP
with setter. Good flow and leveling. Easy strippability.
Koroflex® USA TT-P-2760 I I None <600 One-component, yellow, moisture cured, epoxy modified
823X439 polyurethane.
Koroflex® USA TT-P-2760 II I <600 Green, one-component, moisture cured, epoxy
825X480 modified polyurethane.
4
PPG Aerospace, Global Military Coatings
833K086 USA AMS-C-27725 I None 2:1 <420 Low VOC, two-component, chemically cured coating.
DMS 1850
823-707 USA AMS-C-27725 II None 4:1:4 600+ Green, three-component, highly chemical resistant
polyurethane. Thinner sold separately.
825X309 USA AMS-C-27725 II None 4:1:4 600+ Green, three-component, highly chemical resistant
polyurethane. Thinner sold separately.
823-011 USA AMS-C-27725 II None 4:1:4 600+ Yellow, three-component IFT. Excellent adhesion to
titanium and stainless steel.
Filler Surfacers
Table 7
Product Code Country Specification Mix Ratio VOC g/L Description
CA 7600 Series USA None Varies <350 Epoxy sanding surfacer. Fast dry to sand time. Easy to sand.
CA 8600 Series USA None Varies <350 Polyurethane sanding surfacer. Fast dry to sand time.
Easily sandable after two hours.
FR89/ACT205 UK Def Stan 80-161 3:1 <350 Low VOC epoxy spray filler.
5014 France Approved for use at 2:1:1 600+ Polyurethane sanding surfacer. Can be applied directly to composites or used over
Dassault & Aerospatiale P99/PAC 33 wash primer/urethane primer system for metallic parts.
PU66 Pore Filler France None 2:1:1 600+ Low density, sandable, flexible, polyurethane pore filler.
Wash Primers
Table 8
Product Code Country Specification Mix Ratio VOC g/L Description
PR30B/TH34B UK BS2X32 1:1 600+ Water resistant wash primer for use under epoxy, urethane primers,
Desocryl™ acrylic topcoats.
PP59B/PP59C UK Def Stan 80-15 1:1 600+ Etch primer for use under SEA series Alkyd topcoats.
P99 France Airbus A 007 10113 1:1 600+ Wash primer for use under PAC 33 and the PU66 flexible polyurethane system.
Dassault Good filiform corrosion resistance.
AFS DTD 5555 55A
N54628/MB518 Germany TPF8010-0018 4:1 600+ Wash primer for direct adhesion to aluminum. Used under polyurethane primers.
Airbus A 007 10050
5
Polyurethane Topcoats
Table 9
Product Code Country Specification Type Mix Ratio VOC g/L Description
Desothane® APC USA MIL-PRF-85285 IV Camouflage 3:1 <420 Advanced performance coating (APC) – highly flexible, fluid resistant –
9311/9321 Series Semigloss 3:1 excellent weatherability, color and gloss retention. Easy cleanability.
Desothane® APC USA MIL-PRF-85285 IV Gloss 2:1:1 <420 Advanced performance coating (APC) – highly flexible, fluid resistant –
9800 Series excellent weatherability, color and gloss retention. Easy cleanability.
Desothane® HS topcoat USA/France Mil-PRF-85285 I Gloss 1:1 <420 Highly flexible, fluid resistant, and durable third generation topcoat
CA 8201 MMS-420 Semigloss 3:1 developed exclusively for the military market from the successful
CA 8221 D-12-003-001/SF-001 Camouflage 3:1 Desothane® HS topcoat CA 8000 series. Available in all colors
CA 8211 DMS 2115 and glosses.
DMS-2143
Airbus 04-04-036
Desothane® HS topcoat Australia RAAF K62 None 3:1 <420 Near-matte-gloss, 6-11 gloss units. Available in a range of colors and
CA 8251 gloss from ASC Australia.
PU66 France/UK Airbus A 007 10113 None 1:1 600 Two-component polyurethane topcoat used over P99/PAC 33 wash
Airbus A 007 10118 primer/urethane primer system. In use for French MOD Aerospace and
Dassault Land-Based Defense for internal and external parts. Available in a range
Dornier BICP 4525+ of colors, glosses, and dry times.
FE111 UK BS2X34B/MM0114 I 2:1 600+ Semi-matte polyurethane – full range of camouflage colors.
FE103 UK BS2X34B/MM0114 I 2:1 600+ Matte polyurethane – full range of camouflage colors.
Epoxy Topcoats
Table 10
Product Code Country Specification Type Mix Ratio VOC g/L Description
EC96 UK Def Stan 80-161 None Gloss 2:1 <420 High chemical resistance, available in range of colors.
Matte 1:1 Protects epoxy or urethane primers.
EC94 UK Def Stan 80-161 None Eggshell 2:1 <420 High chemical resistance, available in a limited range of colors.
Protects epoxy or urethane primers.
CA 3000 Series USA None 3:1 <420 Used for interior, resistant against harsh fluids, corrosion resistant.
CA 8300 UK Def Stan 80-209 None 2:1:1 <420 Gloss PU for aircraft and vehicles. Accelerated dry times available via
BS2X34A/B thinner component.
CA 8311 UK BS2X34A/B None 3:1 <420 Matte PU Eurofighter <5 gloss.
SPJ-513-A0014
CA 8321 UK BS2X34A/B None 3:1 <420 Semigloss PU 40-60 gloss.
CA 8351 UK BS2X34/B None 3:1 <420 Semi-matte PU Eurofighter 12-18 gloss.
SPJ-513-A0014
CA 8360 UK Def Stan 80-208 None 3:1 <420 Near-matte PU 7-10 gloss for Land-Based Defense use.
PU88 France DAT 8010X0003 None 2:1 600+ Two-component polyurethane in use for French MOD Aerospace and
Land-Based Defense. Applied over 7835 epoxy primer for helicopters and
Celopox™ 2000SC for land-based vehicles. Available in a range of colors.
6
PPG Aerospace, Global Military Coatings
Desocryl™ Series Germany TPF 8010-0013 600+ Acrylic coatings qualified by the German BWB
N59676 Series WL5.7005
UK DTD 55999 Acrylic coatings qualified for use by the UK Ministry of Defense.
TT30/TT32/TT36 Available in gloss, semigloss, and matte range of colors.
SEA Series UK Def Stan 80-54 Gloss 520+ Alkyd coatings in use by the UK Ministry of Defense.
Def Stan 80-27 Semigloss Available in a range of colors.
Def Stan 80-153 Matte
SEA183 UK Def Stan 80-41 <420 High solids, silicone, alkyd, matte-gloss. Available in a range of colors.
Conductive
Table 13
Product Code Country Specification Mix Ratio VOC g/L Description
528X306 USA MS-144 1:1 600+ Conductive, carbon-filled coating to obtain and control conductivity on
UK BMS 10-21 Type II non-conductive surfaces such as wing to body faring. NESHAP exempt.
BPS 299-947-085 Resistivity of 1megohm to 100 megohms.
207-9-445
528X310 USA BPS 299-947-142 1:1 600+ Anti-static, carbon-filled coating used to control static charge on radomes,
UK BMS 10-21 Type III antennas, composites and other insulative parts. NESHAP exempt. Resistivity
of 0.1 to 100,000 ohms.
N59111 Germany TN10106-T1 5:1:2 600+ Anti-static coating resistivity: 1.5-25 kilohms.
WL5.7030
0986/2620 Type II France Airbus A007 10106 3:1:1 600+ Grey sandable, flexible, water resistant, polyurethane. Resistivity of 5 to 100 megohms.
CA 7870 USA BMS 10-21 Type IV 1:1 600+ Anti static/rain erosion - 1-100 megohms resistivity.
Anti-chafe Topcoats
Table 14
Product Code Country Specification Mix Ratio VOC g/L Description
Desothane® HS USA PS-13355 Gloss 1:1 <420 Less than 0.1 gram weight loss at 10,000 cycles. Different dry times, glosses,
Anti-chafe Semigloss 2:1 and colors available.
CA 8100 Series Camouflage 2:1
Non-Skid/Walkway Topcoats
Table 15
Product Code Country Specification Type Mix Ratio VOC g/L Description
FP34/ACT34 UK AFS1987 NATO Green 5:1 <420 Polyurethane coating used by UK MOD. Non-slip, IR reflective,
BS381C #285 for military vehicles.
CA 8332 UK SPJ-513-B-0308 None 3:1 <420 Low VOC polyurethane coating.
BS2X34B
High-Temperature Topcoats
Table 16
Product Code Country Specification Mix Ratio VOC g/L Description
529K002 USA CPW-269 1:1 600+ Aluminized epoxy topcoat for use up to 450°F continuous over 519X303
Canada PWA-569 or 825-009 primers.
EMS-93284
PL101C2 UK AFS977 None 600+ Stoving, direct to metal, non-chromate, corrosion resistant, aluminized coating.
MSRR9029 For use up to 500°C continuous. Cured 190°C for 120 minutes.
PL82C2 UK AFS1567 None 600+ Air dry, aluminized touch up coating for PL101C2.
MSRR9040 For use up to 500°C continuous.
PL205 UK MSRR9188 None 600+ White coating for metal engine blades. For use up to 250°C continuous.
7
Elastomeric/Rain Erosion Resistant Topcoats
Table 17
Product Code Country Specification Mix Ratio VOC g/L Description
ERC5/ACT124 UK Def Stan 80-158 1:1 600+ Matte-gloss elastomeric polyurethane available in a range of colors.
Used over epoxy primers. Can be clear coated with ERC5 for gloss applications.
Celoflex™ France Aerospatiale NT 100113 1:1:0.5-1 <420 (1:1) Two-component elastomeric polyurethane that is rain erosion resistant. Applied over
Dassault 600+ (1:1:1) P99/PAC 33 wash primer/urethane primer system for metallic parts and anti-static
coatings and sanding primers for composite parts. Used on radomes and leading
edges. Available in a range of colors.
F565 Intermediate Coat UK BS2X35 5:1 600+ Intermediate coat for the very successful Selectively Strippable System. Applied
USA BMS 10-120 between specific epoxy primers and polyurethane topcoats. Allows for future
topcoat removal via chemical stripping without damaging primer.
Temporary Camouflage France Direction Centrale None <400 Waterbase camouflage coating available in 16 colors for mission-specific use over
UK du Materiel existing topcoat. Supplied ready to use. For use on aircraft and vehicles. Removed
with alkaline water solution.
Special Offerings
Table 21
Product Code Country Specification Description
Sempen® Applicators Global Various Method of delivering pretreatment chemicals and coatings for touch up and repair. Available from the GSA.
Sempen® Applicators with alodine, Mil-P-23377H primer, and Desothane® HS topcoat CA 8200 approved for
Corrosion Control Kits USA NavAir-011A-509
use in the US Navy aircraft maintenance manual.
Small touch-up kits for hazardous materials reduction for any multi-component product.
Insert kits USA Not applicable
Compatible with Prevalve Sprayers.
8
For the PPG Aerospace Application Support Center nearest you,
please visit our website at www.ppgaerospace.com
All recommendations, statements, and technical data contained herein are based
on tests we believe to be reliable and correct, but accuracy and completeness of
said tests are not guaranteed and are not to be construed as a warranty, either
expressed or implied. User shall rely on his own information and tests to determine suit-
ability of the product for the intended use and assumes all risks and liability resulting
from his use of the product. Seller’s and manufacturer’s sole responsibility shall be to
Where Smart Solutions Take Flight ® replace that portion of the product of this manufacturer which proves to be defective.
Neither seller nor manufacturer shall be liable to the buyer or any third person for any
injury, loss, or damage directly or indirectly resulting from use of, or inability to use,
PRC-DeSoto International, Inc.
the product. Recommendations or statements other than those contained in a written
12780 San Fernando Road agreement signed by an officer of the manufacturer shall not be binding upon the
Sylmar, CA 91342 manufacturer or seller.
USA
Telephone (818) 362-6711 Issued: 10/12
Toll Free (800) AEROMIX Supersedes: 04/10
Fax (818) 362-7801 Celoflex™, Celogliss, Celopox™, Desoclean®, Desocryl™, Desothane®, Koroflex®,
Korotherm®, and Sempen® are trademarks of PRC-DeSoto International, Inc.
www.ppgaerospace.com
LIT # 2012