Académique Documents
Professionnel Documents
Culture Documents
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
metallic material,
coated or uncoated,
strength classes less
than or equal
to 1100 MPa —
Dimensions
UDC 621.882.21:629.7
BS A 309:1994
Contents
Page
Committees responsible Inside front cover
National foreword ii
1 Scope 1
2 Normative references 1
3 Configuration and dimensions 1
Figure 1 — Configuration for diameter codes 030 and 040 2
Figure 2 — Configuration for diameter codes 050 to 080 2
Table 1 3
List of references Inside back cover
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
© BSI 01-2000 i
BS A 309:1994
National foreword
This British Standard has been prepared under the direction of the Aerospace
Standards Policy Committee. It is identical with ISO 9256:1993 Aerospace —
Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ
threads, metallic material, coated or uncoated, strength classes less than or
equal to 1 100 MPa — Dimensions published by the International Organization
for Standardization (ISO).
Cross-references
International Standard Corresponding British Standard
ISO 286-2:1988 BS EN 20286 ISO system of limits and fits —
Part 2:1992 Tables of standard tolerance grades and
limit deviations for holes and shafts
(Identical)
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
pages 1 to 4, an inside back cover and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on the
inside front cover.
ii © BSI 01-2000
BS A 309:1994
2 Normative references
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
© BSI 01-2000 1
BS A 309:1994
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
2 © BSI 01-2000
BS A 309:1994
Table 1
D1
D2b D3 D4 D5 D6
Diameter normal pitch diameter
Threada
code
0
nom. tol. nom. tol. min. nom. tol. min. H13c
– 0,5
0
030 MJ3×0,5 – 4h6h 3 2,68 6,4 2,3 –0,5 6,5 —
© BSI 01-2000 3
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
4blank
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
© BSI 01-2000
See national foreword.
List of references
BS A 309:1994
BS A 309:1994
ISO 9256:1993
BSI — British Standards Institution
BSI is the independent national body responsible for preparing
British Standards. It presents the UK view on standards in Europe and at the
international level. It is incorporated by Royal Charter.
Revisions
It is the constant aim of BSI to improve the quality of our products and services.
We would be grateful if anyone finding an inaccuracy or ambiguity while using
this British Standard would inform the Secretary of the technical committee
responsible, the identity of which can be found on the inside front cover.
Tel: 020 8996 9000. Fax: 020 8996 7400.
Licensed Copy: Puan Ms. Norhayati, Petroliam Nasional Berhad, 29 April 2003, Uncontrolled Copy, (c) BSI
BSI offers members an individual updating service called PLUS which ensures
that subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should be
addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.
Information on standards
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies. Except as
permitted under the Copyright, Designs and Patents Act 1988 no extract may be
reproduced, stored in a retrieval system or transmitted in any form or by any
means – electronic, photocopying, recording or otherwise – without prior written
permission from BSI.
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
written permission of BSI must be obtained.