Vous êtes sur la page 1sur 159

The problems of congestion, bottlenecks and backtracking can not be visualized by using

templates and models.


Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Following are some of the factors which influence process planning
Correct Answer
Order Quantity , Process capability of machine , Delivery Dates
Your Answer
Process capability of machine , Delivery Dates , Order Quantity

Multiple Choice Single Answer


Question
Gross requirement of products is determined on the basis of
Correct Answer
Both forecast and pending orders
Your Answer
Both forecast and pending orders

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of
layout
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer


Question
In exponential smoothing method,for a stable demand pattern and better smoothing
effect, value of fraction( Alpha) selected is
Correct Answer
0.05 to 0.10
Your Answer
0.05 to 0.10

True/False
Question
Recording of movement is not necessary in case of method study in any form.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Which of the following may be the objectives of project crashing?
Correct Answer
To complete the project in the least possible time , To reduce project cost below it's
normal cost , To achieve uniformity in requirement of resources
Your Answer
To complete the project in the least possible time , To reduce project cost below it's
normal cost , To achieve uniformity in requirement of resources

Multiple Choice Single Answer


Question
Which is the next stage to the inspection based quality control in the historical
development of quality management.
Correct Answer
Quality assurance
Your Answer
Total Quality management

Select The Blank


Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer
Shutdown Maintenance
Your Answer
Shutdown Maintenance

Multiple Choice Single Answer


Question
Inadequate production capacity ultimately leads to
Correct Answer
Poor Customer Service
Your Answer
Low Productivity

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

True/False
Question
Inspection should be conducted on all incoming materials, semifinished items, bought
out components, subcontract items prior to any operation, assembly.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Single Answer


Question
Production Planning includes
Correct Answer
Predetermination of manufacturing requirements
Your Answer
Predetermination of manufacturing requirements

Multiple Choice Multiple Answer


Question
Expediting function is concerned with following activities
Correct Answer
Progress chasing to identify delays which may hold up production , Communicating
possible delays in delivery date commitment to sales department , Devising cures to
keep rate of production in line with schedule
Your Answer
Progress chasing to identify delays which may hold up production , Communicating
possible delays in delivery date commitment to sales department , Devising cures to
keep rate of production in line with schedule

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

True/False
Question
A load chart specifies the work to be carried out by each person of company during shift
hours.
Correct Answer
False
Your Answer
False

Match The Following


Question
Correct Answer
Your Answer
Pessimistic time
b
b
Expected time
Te
Te
Optimistic time
a
a
Most likely time
m
m

True/False
Question
Breakdown is inversly proportional to the investment in W.I.P.
Correct Answer
False
Your Answer
True

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Scheduling

Select The Blank


Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer
Maintenance
Your Answer
Maintenance

Multiple Choice Single Answer


Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Multiple Answer


Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Job Design , Production Planning

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost
Your Answer
To meet the intended function at lowest cost

Multiple Choice Multiple Answer


Question
Which are the subtasks of the maintenance phase of the method study?
Correct Answer
Monitoring and control , Performance appraisal , Audit on savings
Your Answer
Monitoring and control , Performance appraisal , Audit on savings

True/False
Question
short cycle job should be studied for macroscopic motions.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ is a set of tools and techniques by which products are made to comply
with the specifications at minimum cost to the firm.
Correct Answer
Quality control system
Your Answer
Quality control system

True/False
Question
Inspection Order can be a verbal order
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Need for change in layout can occur due to following reason
Correct Answer
introduction of new product
Your Answer
improve quality
Select The Blank
Question
Goods after final inspection should accompany ________to enable dispatch department
to identify and draw correct reference.
Correct Answer
Forwarding note
Your Answer
Forwarding note

Multiple Choice Multiple Answer


Question
Which are the different methods of recording actual progress of work?
Correct Answer
Display boards , Progress cards , Network updating
Your Answer
Display boards , Progress cards , Network updating

Select The Blank


Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer
Opportunity cost
Your Answer
Opportunity cost

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's crashed time?
Correct Answer
Crash cost
Your Answer
Normal cost

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Operation

Multiple Choice Single Answer


Question
What do you mean by the selection of the job for the method study on the basis of
manufacturing difficulties?
Correct Answer
Technical consideration
Your Answer
Economic consideration

True/False
Question
In case of backward pass computation, the latest event time of the end event equals to
the earliest event time minus duration of that activity.
Correct Answer
False
Your Answer
True

Match The Following


Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling

Multiple Choice Multiple Answer


Question
Which of the following are examples of addition during recording for method study?
Correct Answer
Brazing , Welding , Riveting
Your Answer
Brazing , Welding , Riveting

Multiple Choice Single Answer


Question
The ratio of output to input of a production system is commonly known as
Correct Answer
Productivity
Your Answer
Productivity

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Skilled in all Manufacturing Processes

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Inspection order

Multiple Choice Multiple Answer


Question
Which are the factors on which the structure of the transportation cost depends?
Correct Answer
Average distance of shipment , Characteristics of the commodity , Medium of shipment
Your Answer
Average distance of shipment , Characteristics of the commodity , Medium of shipment

Multiple Choice Single Answer


Question
Which is the ideal place to inspect jigs and fixtures in a mass manufacturing unit?
Correct Answer
Separate inspection room
Your Answer
Separate inspection room

True/False
Question
In Gantt Chart, the horizontal lines devide vertical lines into sections which represents
either operations or work centres.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which of the following are minimum requirement for a good quality of design?
Correct Answer
Resonable cost , Resonable procurement time , Resonable manufacturing time
Your Answer
Resonable manufacturing time , Resonable cost , Resonable procurement time

Multiple Choice Single Answer


Question
Where does the central line is located in case of p-chart?
Correct Answer
at p bar
Your Answer
at median

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost
Your Answer
To meet the intended function at lowest cost

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Multiple Answer


Question
Material Requirement Planning is very useful in following situations
Correct Answer
Long Lead time for procurement , Several levels of assemblies in product , Long
manufacturing cycle
Your Answer
Long Lead time for procurement , Long manufacturing cycle , Demand for the product is
not known

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank


Question
The ________ is the process of withdrawing the equipment from the production line,
dismantling it unitwise, visualising defects, effecting adjustments, replacing worn-out
parts and finally building it up to get desired accuracies.
Correct Answer
Reconditioning
Your Answer
Overhauling

Multiple Choice Single Answer


Question
The ratio of output to input of a production system is commonly known as
Correct Answer
Productivity
Your Answer
Productivity

True/False
Question
In case of two handed process chart, the simultaneous activities of both hands are
recorded opposite to each other on the chart.
Correct Answer
True
Your Answer
True

Match The Following


Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Multiple Choice Single Answer


Question
What do you mean by the study of repetitive short cycle operations which involve quick
hand / feet motions?
Correct Answer
Micromotion study
Your Answer
Macromotion study

True/False
Question
An activity should represent an operation or set of operations which can be performed
using a particular kind of equipment or a special skill.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and new
trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True

True/False
Question
After goods have been manufactured, route sheets and operation layouts should not be
collected back.
Correct Answer
False
Your Answer
False

True/False
Question
Planned lubrication is said to be the nervous system of the equipment.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What does the points falling outside the control limits indicate?
Correct Answer
Presence of assignable causes
Your Answer
Mean = Standard deviation

Multiple Choice Single Answer


Question
Which industry out of the following industries require maximum consideration for safety
factor while selecting plant location?
Correct Answer
Nuclear power plant
Your Answer
Nuclear power plant

Multiple Choice Multiple Answer


Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Play in guide rods , Errors in setting

Multiple Choice Single Answer


Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs

Multiple Choice Multiple Answer


Question
Which of the following are examples of addition during recording for method study?
Correct Answer
Brazing , Welding , Riveting
Your Answer
Brazing , Welding , Riveting

True/False
Question
An activity can share the same tail event and same head event with any other activity.
Correct Answer
False
Your Answer
True

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Time and Motion
Multiple Choice Single Answer
Question
Which kind of gauge consists of electrical contacts operating a series of colloured signal
lamps which indicate whether the dimension is correct, oversize or undersize?
Correct Answer
Multiple gauging
Your Answer
Multiple gauging

Multiple Choice Multiple Answer


Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Job Design , Production Planning

True/False
Question
Only skilled worker can use the fixed limit gauge.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Which are major benefits of identifying the critical path?
Correct Answer
It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It identifies activities to be given preference in
allocation of resources. , It helps to exercise "control by exception".
Your Answer
It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It reduces the paperwork , It identifies activities to
be given preference in allocation of resources.

Multiple Choice Multiple Answer


Question
Which are reason due to which the progress of work is rarely in line with it's plan?
Correct Answer
Absenteeism , Machine breakdowns , Substandard performance against prefixed
production standards
Your Answer
Absenteeism , Machine breakdowns , Substandard performance against prefixed
production standards

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Inspection order

Multiple Choice Multiple Answer


Question
Which of the following are important considerations concerning activity times?
Correct Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Your Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.

Select The Blank


Question
Capacity decisions have a direct influence on performance of production system in
respect of ________
Correct Answer
Delivery performance
Your Answer
Delivery performance

True/False
Question
Breakdown of machines, absenteeism of worker does not dislocate the manufacturing
activity in process layout
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Operation

Multiple Choice Multiple Answer


Question
Which of the following possibilities can be explored by using flow process chart?
Correct Answer
Eliminating the operations or combining the operations with another , Reducing the
distance traveled by the workmen or materials , Avoiding the waiting time and thereby
reduce production losses
Your Answer
Eliminating the operations or combining the operations with another , Reducing the
distance traveled by the workmen or materials , Avoiding the waiting time and thereby
reduce production losses

Multiple Choice Single Answer


Question
The document raised by PPC which authorises different functions to take action as per
instruction is called
Correct Answer
Work Order
Your Answer
Work Order

True/False
Question
Dust gets mixed with lubricants, forms an abrasive substance and causes pre-mature
failure of machinery.
Correct Answer
True
Your Answer
True

Match The Following


Question
Correct Answer
Your Answer
Draining and refilling of oil reserviors of plunger pump
Yearly
Yearly
Parts lubricated with oil nipple
Daily
Daily
Tools and slideways
two to three times a day
two to three times a day
Table lubrication
Weekly
Weekly

Select The Blank


Question
Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer
easier
Your Answer
easier

True/False
Question
Operation process charts though indicates the sequence of events but do not show
movements.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the probability that a bad lot will be accepted by the sampling plan.
Correct Answer
Consumer's risk
Your Answer
Consumer's risk

Select The Blank


Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Hiring capacity

Select The Blank


Question
The ________ breakdowns usually cost more, partly due to damage done to the
adjustment components and partly due to emergency actions.
Correct Answer
Unexpected
Your Answer
Unexpected

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Scheduling

Multiple Choice Single Answer


Question
Which is the zone beyond LTPD in case of Oc curve of a general plan?
Correct Answer
Zone of rejection
Your Answer
Zone of rejection

Multiple Choice Single Answer


Question
Where the ignorance towards the degradation of machine leads to?
Correct Answer
Eventual breakdown
Your Answer
Eventual breakdown
POM Assignment
Multiple Choice Multiple Answer
Question
Which of the following aspects are essential to ensure quality of purchased items?
Correct Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements
Your Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements

Select The Blank


Question
The ________ breakdowns usually cost more, partly due to damage done to the
adjustment components and partly due to emergency actions.
Correct Answer
Unexpected
Your Answer
Unexpected

True/False
Question
After goods have been manufactured, route sheets and operation layouts should not be
collected back.
Correct Answer
False
Your Answer
False

True/False
Question
In case of centralised inspection, inspection rooms generally become bottleneck and
cause delay in taking action regarding rejection or rework.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
MRP is based on the concept of inventory demand which is of following type
Correct Answer
Dependent and independent
Your Answer
Dependent and independent

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Multiple Choice Multiple Answer


Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Job Design , Production Planning

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective more than AQL but less than LPTD

Multiple Choice Multiple Answer


Question
Which of the following are examples of addition during recording for method study?
Correct Answer
Brazing , Welding , Riveting
Your Answer
Brazing , Welding , Riveting

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular
Your Answer
Rectangular

Multiple Choice Multiple Answer


Question
Which of the following causes can be responsible for derailing the production schedule in
a factory?
Correct Answer
Errors in drawings , Delay in receipt of material from vendor , Excessive absenteeism
Your Answer
Errors in drawings , Delay in receipt of material from vendor , Excessive absenteeism

Multiple Choice Multiple Answer


Question
Which of the following situations demand the economic consideration while selecting a
job for method study?
Correct Answer
Unorderly movement of men and materials , Excessive process defectives , Too many
suggestions received for improvement from a department or section
Your Answer
Unorderly movement of men and materials , Excessive process defectives , Inconsistent
quality

True/False
Question
During set up of X bar-R control chart, control limts should be practically revised from
time to time as additional data is accumulated.
Correct Answer
True
Your Answer
False

Multiple Choice Multiple Answer


Question
Which of the following are the basic requirements of quality standard?
Correct Answer
Deifinite , Undesrstandable , Economically viable
Your Answer
Absolute uniformity , Undesrstandable , Economically viable

Match The Following


Question
Correct Answer
Your Answer
Toung
Sweet
Sweet
Eye
Crack
Crack
Nose
Burnout
Burnout
Ear
Impact
Roughness

Select The Blank


Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer
Lot Tolerance Percentage Defective
Your Answer
Acceptable quality level

True/False
Question
Floor inspection delays the identification of faults which can not be rectified immediately
before large lots are spoiled.
Correct Answer
False
Your Answer
False

True/False
Question
Cent percent inspection is required on WIP prior to the key, critical or costly operation.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
The document which incorporates details of process planning for a job is called
Correct Answer
Route Sheet
Your Answer
Route Sheet

True/False
Question
Repetitive movements between work stations which are difficult to be traced on string
diagrams can be conveniently shown on flow diagrams.
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer


Question
Which of the following is the most popular technique for Project Production?
Correct Answer
PERT & CPM
Your Answer
PERT & CPM

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost
Your Answer
To meet the intended function at lowest cost
Multiple Choice Single Answer
Question
What can be the worst effect due to excessive vibration?
Correct Answer
Breakdown
Your Answer
Breakdown

Multiple Choice Single Answer


Question
What is the relation between duration of an activity and length of an arrow?
Correct Answer
No relation
Your Answer
No relation

Multiple Choice Single Answer


Question
What is the nature of the sampling plan for critical defects?
Correct Answer
Tight
Your Answer
Tight

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

Multiple Choice Multiple Answer


Question
Which of the following are important considerations concerning activity times?
Correct Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Your Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.

Multiple Choice Single Answer


Question
Which of the following techniques is used by industrial engineering department to obtain
the utilisation index?
Correct Answer
Work Sampling Studies
Your Answer
Break Even Analysis

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Multiple Choice Multiple Answer


Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic
Your Answer
Change in physical characteristic , Consumption of physical effort , Movement of material

True/False
Question
An activity can share the same tail event and same head event with any other activity.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Multiple Answer


Question
Which of the following are examples of pure materials?
Correct Answer
Bakeries , Ice factories , Woolen
Your Answer
Bakeries , Ice factories , Woolen

Select The Blank


Question
The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer
Specifications
Your Answer
Specifications

Multiple Choice Single Answer


Question
Site factors for plant location include
Correct Answer
Suitability of land
Your Answer
Suitability of land

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Multiple Answer


Question
Which of the following defects can be observed during preventive inspection by using
human senses?
Correct Answer
Deviation from normal sound , Excessive Vibration , Leakage of a gas
Your Answer
Deviation from normal sound , Excessive Vibration , Leakage of a gas

Select The Blank


Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer
Shutdown Maintenance
Your Answer
Working Maintenance

True/False
Question
Independent float either affects the float of preceding activities or that of succeeding
activities.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts
Your Answer
Over ordering , under ordering , stockouts
True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False
Your Answer
False

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Time and Motion

Match The Following


Question
Correct Answer
Your Answer
Factor Analysis
Method to evaluate layouts
Technique for evolving and analysis of layouts
Minimization of production delays
Objective of good layout
Objective of good layout
Maximum visibility
Principles of good layout
Principles of good layout
Scale model
Layout analysis
Method to evaluate layouts

Multiple Choice Single Answer


Question
Following is one of the techniques used for Material Planning for high value material
Correct Answer
MRP
Your Answer
MRP

Multiple Choice Single Answer


Question
What do you understand by totality of features and characteristics of a product or
service that bears on it's ability to satisfy the customer?
Correct Answer
Quality
Your Answer
Quality

Select The Blank


Question
One detachable ticket is prepared for each ________.
Correct Answer
Operation
Your Answer
Worker

Multiple Choice Single Answer


Question
MRP is based on the concept of inventory demand which is of following type
Correct Answer
Dependent and independent
Your Answer
Dependent and independent

Multiple Choice Single Answer


Question
Main objective of a good plant layout is
Correct Answer
Reduce material handling cost
Your Answer
Reduce material handling cost

True/False
Question
As a general rule, the number of tail event of an activity is more than that of it's head
event.
Correct Answer
False
Your Answer
False

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Multiple Answer


Question
Which of the following are important considerations concerning activity times?
Correct Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Your Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Select The Blank
Question
The ________ pertain to the climatic conditions which the component , product or
material should withstand.
Correct Answer
Environmental specifications
Your Answer
Environmental specifications

Multiple Choice Multiple Answer


Question
Following are some of the factors considered for evaluation of alternative layouts
Correct Answer
Flow of Material , Equipment utilization , Ease of supervision
Your Answer
Flow of Material , Ease of supervision , Delivery performance

Multiple Choice Multiple Answer


Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Tool wear , Errors in setting

True/False
Question
All activities must not be tied up into the network
Correct Answer
False
Your Answer
False

Select The Blank


Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between
________.
Correct Answer
0.01 to 10%
Your Answer
0.01 to 10%

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and new
trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question
What is the base for considering activity time as single time estimate or three time
estimate?
Correct Answer
Level of uncertainty
Your Answer
Availability of labour

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's normal time?
Correct Answer
Normal cost
Your Answer
Normal cost

Select The Blank


Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity

Select The Blank


Question
A ________helps to avoid crowding of jobs at a particular machine by change of route of
some of the jobs or by diverting work to other machine.
Correct Answer
Control board
Your Answer
Move order

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Match The Following


Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling

Select The Blank


Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Hiring capacity

Multiple Choice Multiple Answer


Question
In an organization there may not be a formal PPC department if
Correct Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Your Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large

Multiple Choice Multiple Answer


Question
Which of the following cases can be treated as delay during recording of method study?
Correct Answer
Operators awaiting instructions from supervisor , Worker waiting for his turn at tools
stores , Jobs awaiting at the machines for their turn
Your Answer
Operators awaiting instructions from supervisor , Worker waiting for his turn at tools
stores , Jobs awaiting at the machines for their turn

True/False
Question
Inspection order is must even for simple jobs which can be inspected by shop inspector
with the tooling available on shop.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Order preparation process for products manufatured to order requires following
documents
Correct Answer
Sales Order , Work order , Shop order
Your Answer
Sales Order , Work order , Purchase order

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost
Your Answer
Reduce lead time

True/False
Question
Cent percent inspection is often more practical and economical than sampling inspection.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Scale model used for layout analysis have following advantages
Correct Answer
Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily
Your Answer
Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily

Multiple Choice Single Answer


Question
Which of the following technique is event oriented ?
Correct Answer
Project Evaluation & Review Technique
Your Answer
Project Evaluation & Review Technique
Multiple Choice Single Answer
Question
What is the meaning of " Product features" according to J.M.Juran?
Correct Answer
Quality of design
Your Answer
Quality of design

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer


Question
What are uses of diagrams in method study?
Correct Answer
Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.
Your Answer
Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.

True/False
Question
A load chart specifies the work to be carried out by each person of company during shift
hours.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Route Sheet generally contains following information
Correct Answer
Material Specification , Sequence of operation , Skill of Labour
Your Answer
Material Specification , Sequence of operation , Skill of Labour

True/False
Question
Cellular layout is based on the concept of Group Technology
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Which varaible is taken along the abscissa or X axis?
Correct Answer
Time
Your Answer
Standard deviation

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

Multiple Choice Multiple Answer


Question
Expediting function is concerned with following activities
Correct Answer
Progress chasing to identify delays which may hold up production , Communicating
possible delays in delivery date commitment to sales department , Devising cures to
keep rate of production in line with schedule
Your Answer
Recording progress of work , Progress chasing to identify delays which may hold up
production , Communicating possible delays in delivery date commitment to sales
department

Select The Blank


Question
Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer
easier
Your Answer
time consuming

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

True/False
Question
In case of forward pass computation, the earliest event time of the first event is zero.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What is represented by an arrow in a network?
Correct Answer
Activity
Your Answer
Activity

True/False
Question
As a general rule, a site five times the actual plant size is considered minimum for
parking, access facilities and future expansion.
Correct Answer
True
Your Answer
True

True/False
Question
Independent float either affects the float of preceding activities or that of succeeding
activities.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
The document raised by PPC which authorises different functions to take action as per
instruction is called
Correct Answer
Work Order
Your Answer
Work Order

Multiple Choice Single Answer


Question
A good layout makes effective use of space. Utilization of space for a department like
Stores can be measured by
Correct Answer
Proportion of Cubic volume space utilized
Your Answer
Ratio of area utilised to area available

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Operation

Multiple Choice Multiple Answer


Question Why graphical method of recording is preferred over the descriptive method
during method study?
Correct Answer It segregates effective part form ineffective parts , It reduces effort
involved in writing , Critical examinations easier and more effective
Your Answer Critical examinations easier and more effective , It segregates effective part
form ineffective parts , It reduces effort involved in writing

Multiple Choice Multiple Answer


Question Which are the subfactors of community facilities or social infrastructure?
Correct Answer Accomodation , Educational , Entertainment
Your Answer Accomodation , Educational , Entertainment

Select The Blank


Question The ________ is the probability that a bad lot will be accepted by the sampling
plan.
Correct Answer Consumer's risk
Your Answer Consumer's risk

Multiple Choice Multiple Answer


Question Which of the following are examples of consumption of physical effort during
recording for method study?
Correct Answer Bending , Positioning , Unloading
Your Answer Bending , Positioning , Unloading

Multiple Choice Single Answer


Question How to claculate the producer risk in the OC Curve?
Correct Answer Probability that a good lot will be rejected by the sampling
Your Answer Probability that a good lot will be rejected by the sampling

Select The Blank


Question The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer Specifications
Your Answer Specifications

Select The Blank


Question The ________ is the watch dog which ensures that every element of
production and activities which could affect the quality of end product are regulated to
the extent desirable.
Correct Answer Quality control
Your Answer Quality control

True/False
Question Expediting action is necessary if the delays and interruptions are abnormal and
hence any subsequent delay is bound to extend the promised delivery date.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Process Engineer does not get sufficient time for designing tooling for most
economic production run when
Correct Answer Delivery time is less
Your Answer Delivery time is less

Select The Blank


Question The ________ includes preventive maintenance activities whose needs are
identified through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer Shutdown Maintenance

True/False
Question Breakdown of machines, absenteeism of worker does not dislocate the
manufacturing activity in process layout
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is the maximum percentage defective that for the purpose of
sampling inspection can be considered satisfactory as a process average.
Correct Answer Acceptable quality level
Your Answer Acceptable quality level

Multiple Choice Single Answer


Question What do you mean by lowest possible direct cost required to complete an
activity within it's crashed time?
Correct Answer Crash cost
Your Answer Crash cost

Multiple Choice Multiple Answer


Question Which are the first three steps of Critical Path Analysis technique?
Correct Answer Activity relationships , Activity identification , Network construction
Your Answer Activity relationships , Activity identification , Network construction

True/False
Question Dust gets mixed with lubricants, forms an abrasive substance and causes pre-
mature failure of machinery.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which of the following can be subtypes of corrective maintenance?
Correct Answer Shutdown Maintenance , Design-out Maintenance , Design-in
Maintenance
Your Answer Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance

Select The Blank


Question The ________ is the maintenance work initiated on a result of knowledge of
the condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer Condition monitoring

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Production

Match The Following


Question Correct Answer Your Answer

Toung Sweet Sweet

Eye Crack Crack

Nose Burnout Burnout

Ear Impact Impact

Select The Blank


Question The ________ is a set of tools and techniques by which products are made to
comply with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system

Multiple Choice Single Answer


Question What is the meaning of " Product features" according to J.M.Juran?
Correct Answer Quality of design
Your Answer Quality of design

Multiple Choice Multiple Answer


Question Which of the following method can be used to record the facts during the
method study?
Correct Answer Micromotion study , Cyclegraph , Chronocyclegraph
Your Answer Micromotion study , Photograph , Cyclegraph , Chronocyclegraph

True/False
Question All activities must not be tied up into the network
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling plan
Your Answer Single sampling plan , Double sampling plan , Multiple sampling plan

Multiple Choice Multiple Answer


Question How many of the following are types of specification?
Correct Answer Material specifications , Dimensional specifications , Performance
specifications
Your Answer Material specifications , Dimensional specifications , Performance
specifications

Multiple Choice Multiple Answer


Question Plant layout facilitates processing of products in most effective manner through
the following
Correct Answer Shortest possible distance , Shortest processing time , Minimum
movement
Your Answer Shortest possible distance , Minimum movement

Select The Blank


Question Work study is also called ________ study
Correct Answer Time and Motion
Your Answer Time and Motion

True/False
Question Operation Process Chart provides information on time and distances
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Plant Layout is concerned with optimum arrangement of the following
Correct Answer Storage space , Machines , Material Handling Equipment
Your Answer Storage space , Machines , Sequence of operation

Multiple Choice Single Answer


Question Management often fails to realize the importance of efficient layout due to
following reason
Correct Answer losses resulting from poor layout are not directly shown in the financial
statements
Your Answer losses resulting from poor layout are not directly shown in the financial
statements

True/False
Question Inspection order is must even for simple jobs which can be inspected by shop
inspector with the tooling available on shop.
Correct Answer False
Your Answer True

True/False
Question Feasibility of time schedule requires that an activity be scheduled before any of
it's predecessors are scheduled.
Correct Answer False
Your Answer True

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

True/False
Question Planned lubrication is said to be the nervous system of the equipment.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What is the basic philosophy of statistical process control?
Correct Answer Prevention is better than cure
Your Answer Prevention is better than cure

Multiple Choice Single Answer


Question How does the control chart of statistical quality control helps the operating
personnel?
Correct Answer Identify the presence of an assignable cause before it develops
Your Answer Identify the presence of an assignable cause before it develops

Multiple Choice Single Answer


Question Where does the central line is located in case of p-chart?
Correct Answer at p bar
Your Answer at p bar

Multiple Choice Multiple Answer


Question Which of the following may be the objectives of project crashing?
Correct Answer To complete the project in the least possible time , To reduce project
cost below it's normal cost , To achieve uniformity in requirement of resources
Your Answer To complete the project in the least possible time , To reduce project cost
below it's normal cost , To achieve uniformity in requirement of resources

Select The Blank


Question The ________ advocates maintenance procedures whereby the condition of the
plant is constantly watched through systematic inspection to unearth unhealthy
conditions and preventive
Correct Answer Preventive Maintenance
Your Answer Preventive Maintenance

True/False
Question A network should be progression of activities always moving forward.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which is the ideal place to write a description of an activity in a network?
Correct Answer Above the arrow
Your Answer Above the arrow

Select The Blank


Question In case of an OC curve, the risk of rejecting a good quality lot may vary
between ________.
Correct Answer 0.01 to 10%
Your Answer 0.01 to 10%

True/False
Question For p-chart, the central line of fraction defectives is determined by average
percentage defectives.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which phase of method study is concerned with analyzing the facts critically,
generating alternatives which form the basis for selection and development of improved
methods?
Correct Answer Critical examination
Your Answer Critical examination

Multiple Choice Single Answer


Question Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines

Multiple Choice Single Answer


Question Which kind of inspection is followed in case of product layout?
Correct Answer Pilot inspection
Your Answer Pilot inspection

Match The Following


Question Correct Answer Your Answer

Emerson Efficiency Plan Wage Payment Wage Payment

Craft Facilities Planning Facilities Planning

Work Sampling Machine utilization Sampling Inspection

Gantt Chart Production Scheduling Production Scheduling

The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Multiple Answer


Question
Which of the following information is available in summary of part in a chart during
methods study?
Correct Answer
Frequency of each symbol , Total time for each symbol , Total distance travelled by the
object
Your Answer
Frequency of each symbol , Total time for each symbol

True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which varaible is taken along the ordinate or Y axis?
Correct Answer
Quality
Your Answer
Quality

Multiple Choice Multiple Answer


Question
Which of the following schedules are recommended to prepare and follow as a part of
preventive maintenance system?
Correct Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule
Your Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some maintenance related characteristics by
making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Extrernal inspection

Multiple Choice Multiple Answer


Question
Which are different ways to show critical path in a network?
Correct Answer
Thick Line , Red Line , Double Line
Your Answer
Thick Line , Red Line , Double Line

Multiple Choice Multiple Answer


Question
What are the benefits of overhauling?
Correct Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares
Your Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares

Match The Following


Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Line Layout
Product Layout
Line Layout
Shop layout
Process Layout
Functional Layout
Functional Layout

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Multiple Answer


Question
Major contributors in the development of Control Charts, Sampling plan are
Correct Answer
F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of
layout
Correct Answer
False
Your Answer
True

True/False
Question
Repetitive movements between work stations which are difficult to be traced on string
diagrams can be conveniently shown on flow diagrams.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Job card

Multiple Choice Multiple Answer


Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic
Your Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Overhauling
True/False
Question
All activities lying on the non-critical paths must have total float and free float.
Correct Answer
False
Your Answer
False

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Method

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction

True/False
Question
In case of X bar-R charts,it is ensured that the assignable causes are detected before the
tolerances are violated, upper and lower statistical limits are worked out and inserted
into a chart.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective less than AQL but more than LPTD

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Semiskilled

Multiple Choice Multiple Answer


Question
Which three of the following are causes of continuous upward pattern of Xbar-R control
chart?
Correct Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt
Your Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt

True/False
Question
Root cause of most of the breakdowns is failure of the lubrication system.
Correct Answer
True
Your Answer
True
True/False
Question
It is not necessary to know spare time available on the non-critical path to allow a little
delay for noncritical activity.
Correct Answer
False
Your Answer
False

True/False
Question
MRP software generates time periodwise requiremetn of subassemblies
Correct Answer
True
Your Answer
True

True/False
Question
In case of two handed process chart, the simultaneous activities of both hands are
recorded opposite to each other on the chart.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What do you mean by CPM?
Correct Answer
Critical Path Method
Your Answer
Critical Path Method

Multiple Choice Multiple Answer


Question
Which of the following are major inputs to scheduling?
Correct Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards
Your Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards

Multiple Choice Multiple Answer


Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts
Your Answer
Over ordering , under ordering , stockouts

Multiple Choice Single Answer


Question
What do you mean by the verification of object against predetermined standards of
quality or quantity or both?
Correct Answer
Inspection
Your Answer
Inspection

Multiple Choice Multiple Answer


Question
What are the advantages of templates over diagrams?
Correct Answer
Can be conveniently moved on the graph paper , Less laborious , Saves time
Your Answer
Can be conveniently moved on the graph paper , Less laborious , Unskilled person can
do and analyze it

True/False
Question
It would not affect the project completion time if non-critical activities take little loner
time than planned.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular
Your Answer
Bell

Multiple Choice Single Answer


Question
Which is the right time to prepare stores issue order?
Correct Answer
When route sheet is ready
Your Answer
When route sheet is ready

Multiple Choice Single Answer


Question
Which element of a network represents a task which has got a definite beginning and
definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some defects in moving parts, internal
cracks, and others , when machine is under preplanned shutdown?
Correct Answer
Internal inspection
Your Answer
Internal inspection

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Dispatching

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank


Question
Goods after final inspection should accompany ________to enable dispatch department
to identify and draw correct reference.
Correct Answer
Forwarding note
Your Answer
Forwarding note

Multiple Choice Single Answer


Question
Who has introduced the useful concept of control chart in 1931?
Correct Answer
Walter Shewhart
Your Answer
Walter Shewhart

Question
Which of the following concepts must be understood for the achievement of quality?
Correct Answer
Quality of design , Quality of conformance , Purpose of product
Your Answer
Quality of conformance , Quality of design

Multiple Choice Single Answer


Question
What do you mean by the graphical representation of the project which is composed as
series of connected arrows and circles to describe the interrelationship of the activities
involved?
Correct Answer
Network
Your Answer
Network

Multiple Choice Multiple Answer


Question
Which of the following cases indicates change in physical characteristic?
Correct Answer
Turning , Grinding , Drilling
Your Answer
Turning , Grinding , Drilling

Multiple Choice Single Answer


Question
What do you mean by the verification of object against predetermined standards of
quality or quantity or both?
Correct Answer
Inspection
Your Answer
Quality assurance

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Select The Blank


Question
The ________ advocates maintenance procedures whereby the condition of the plant is
constantly watched through systematic inspection to unearth unhealthy conditions and
preventive
Correct Answer
Preventive Maintenance
Your Answer
Preventive Maintenance

Select The Blank


Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer
Lot Tolerance Percentage Defective
Your Answer
Lot Tolerance Percentage Defective

Multiple Choice Single Answer


Question
How non-critical activities are shown in the time chart during project scheduling?
Correct Answer
Thin lines
Your Answer
Thin lines

Select The Blank


Question
An ________ history card is the record of all repairs, replacements and engineering
changes carried out in the equipment during it's period of service.
Correct Answer
Equipment history card
Your Answer
Equipment history card

Multiple Choice Single Answer


Question
Who prepares the daily production report?
Correct Answer
Shop Supervisor
Your Answer
Shop Supervisor

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Motion

True/False
Question
Every network does not necessarily have a critical path.
Correct Answer
False
Your Answer
False

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Scheduling

Multiple Choice Single Answer


Question
Which method of critical path determination begins with the end event and moves
backward to the start event of the project network?
Correct Answer
Backward pass computation
Your Answer
Backward pass computation

True/False
Question
Scrap allowance is added to net requirement of material while ordering for material
Correct Answer
True
Your Answer
True

True/False
Question
Dust gets mixed with lubricants, forms an abrasive substance and causes pre-mature
failure of machinery.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs

True/False
Question
It would not affect the project completion time if non-critical activities take little loner
time than planned.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the process of withdrawing the equipment from the production line,
dismantling it unitwise, visualising defects, effecting adjustments, replacing worn-out
parts and finally building it up to get desired accuracies.
Correct Answer
Reconditioning
Your Answer
Reconditioning

True/False
Question
Flow process charts do record movements as well as visual pictures.
Correct Answer
False
Your Answer
False

True/False
Question
Process Planning is concerned with decisions regarding requirement of machines and
manpower for meeting customer demand
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
What is the meaning of " Product features" according to J.M.Juran?
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Single Answer


Question
Technique which can help an organization to reduce inventory is called
Correct Answer
MRP
Your Answer
MRP

Multiple Choice Multiple Answer


Question
Which of the following are examples of consumption of physical effort during recording
for method study?
Correct Answer
Bending , Positioning , Unloading
Your Answer
Bending , Positioning , Drilling
True/False
Question
Objective of Work Study is to improve Productivity
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which three of the following options can be used to reduce the duration of activity during
project crashing?
Correct Answer
Allocating more manpower and machines than originally planned for. , Working
additional shifts or overtime. , Awarding work to vendors who charge extra but expedite
deliveries.
Your Answer
Allocating more manpower and machines than originally planned for. , Working
additional shifts or overtime. , Awarding work to vendors who charge extra but expedite
deliveries.

Multiple Choice Single Answer


Question
Which is the next stage to the inspection based quality control in the historical
development of quality management.
Correct Answer
Quality assurance
Your Answer
Quality assurance

Match The Following


Question
Correct Answer
Your Answer
Bottom compartment of control board
Bunch of work orders arranged in a sequence in which they are to be processed.
Bunch of work orders arranged in a sequence in which they are to be processed.
Control board
Pictorial view of machine loading activity
Pictorial view of machine loading activity
Top compartment of control board
Work order of item currently being worked on the machine
Work order of item currently being worked on the machine
Middle compartment of control board
Work order of item to be processed next on the machine
Work order of item to be processed next on the machine

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Multiple Choice Multiple Answer


Question
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen
Your Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen

Multiple Choice Multiple Answer


Question
How the concept of float is helpful to planners?
Correct Answer
To decide priorities in allocation of resources , To minimize the requirement of resources
, To prevent peaks and valleys in requirement of resources
Your Answer
To decide priorities in allocation of resources , To minimize the requirement of resources

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Operation

Multiple Choice Single Answer


Question
Which kind of defect can be called as minor defect?
Correct Answer
Which does not reduce the usability of the product for its intended use
Your Answer
Which does not reduce the usability of the product for its intended use

Select The Blank


Question
The ________ is specified to indicate the maximum permissible variability in the
dimensions product or parts.
Correct Answer
Tolerance
Your Answer
Tolerance

True/False
Question
Sampling inspection is best suited when cost of inspection is much higher than the loss
arising from the acceptance of a defective part.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which element of a network represents a task which has got a definite beginning and
definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Multiple Answer


Question
Following are the commonly used factors considered for evaluation of layout in factor
analysis method
Correct Answer
Flow of material , Equipment utilization , Working condition
Your Answer
Flow of material , Equipment utilization , Working condition

Select The Blank


Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity

Select The Blank


Question
The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer
Specifications
Your Answer
Standards

Multiple Choice Multiple Answer


Question
Which features should be covered by the specifications of materials while defining the
qualitative requirement?
Correct Answer
Material composition , Dimensions , Any heat treatment if required
Your Answer
Material composition , Dimensions , Any heat treatment if required

Multiple Choice Single Answer


Question
The ratio of output to input of a production system is commonly known as
Correct Answer
Productivity
Your Answer
Productivity

True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
Which portion of the perforated route sheet should be signed by the operator or
supervisor?
Correct Answer
Lower portion
Your Answer
Lower portion

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and new
trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True

Match The Following


Question
Correct Answer
Your Answer
Scale model
Layout analysis
Modelling approach to layouts
Factor Analysis
Method to evaluate layouts
Technique for evolving and analysis of layouts
Minimization of production delays
Objective of good layout
Objective of good layout
Maximum visibility
Principles of good layout
Principles of good layout

True/False
Question
Maintenance function must be decentralised apart from a size of a manufacturing
organisation for it's better functioning.
Correct Answer
False
Your Answer
True

Question
Process Sheets for parts in batch production are not maintained as standard process
sheet
Correct Answer
False
Your Answer
False

True/False
Question
Theoretical capacity equals number of normal working hours of that machine.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which are the basic requirements of the " Quality of Design "?
Correct Answer
Identification of right product , Selection of appropriate features , Ensure that product
renders satisfactory service to customer
Your Answer
Identification of right product , Selection of appropriate features , Ensure that product
renders satisfactory service to customer

Match The Following


Question
Correct Answer
Your Answer
Change in chemical characteristic
Chemical reaction
Chemical reaction
Consumption of effort
Posting a ledger
Welding
Information given
Giving directions or instructions
Posting a ledger
Subtraction
Removal of worn-out part from a machine
Removal of worn-out part from a machine

Multiple Choice Multiple Answer


Question
Which of the following aspects are essential to ensure quality of purchased items?
Correct Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements
Your Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Move order

Select The Blank


Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer
Opportunity cost
Your Answer
Idle wages

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Policies regarding issue of licences

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of
layout
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
What is the base for considering activity time as single time estimate or three time
estimate?
Correct Answer
Level of uncertainty
Your Answer
Level of uncertainty

Multiple Choice Single Answer


Question
Product layout is employed for manufacturing following products
Correct Answer
refrigirators
Your Answer
automobile components

True/False
Question
Diversified labour is adequately available in rural area as compared to urban area.
Correct Answer
False
Your Answer
False

Match The Following


Question
Correct Answer
Your Answer
Fixation of inventory level
Reorder level
Single source of supply
Symptom of ill planned purchasing
Over ordering
Over ordering
Factor influencing material planning
Lead time
Reorder level
Net requirement of material under MRP
Stock on hand
Stock on hand

True/False
Question
In case of backward pass computation, the latest event time of the end event equals to
the earliest event time minus duration of that activity.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer


Question
Which of the following technique makes three time estimates for each activity?
Correct Answer
Project Evaluation & Review Technique
Your Answer
Project Evaluation & Review Technique

True/False
Question
Suburban location provides the compromise netween rural and urban locations.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Which time is determined by the backward pass computation method of determination of
critical path ?
Correct Answer
Latest allowable time for each event
Your Answer
Latest allowable time for each event

Multiple Choice Single Answer


Question
What do you understand by the measurement of work to establish allowed time for a job
for the defined method?
Correct Answer
Work measurement
Your Answer
Motion economy

True/False
Question
Even in a small set up wherein maintenance of a machine is looked after by a mechanic
cum worker, he should report directly to the person responsible for the manufacturing
operations.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Out of two basic criteria for the selection of a manufacturing method, one is, it must be
able to meet the specifications of final product and the other is, it must be
Correct Answer
Cost effective method
Your Answer
Cost effective method

True/False
Question
Kanban system is essentially a computer based system for production scheduling and
control
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Which of the following symbols are used in flow process chart but not used in operation
process chart?
Correct Answer
Storage , Delay , Transport
Your Answer
Storage , Delay

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Skilled in one specific Manufacturing Process

Multiple Choice Multiple Answer


Question
Which of the following are the major steps of making of the X bar-R control chart?
Correct Answer
Collection of data , Claculation of mean,range,grand average and mean range , Set up
control chart for average and calculate control limits of range chart
Your Answer
Claculation of mean,range,grand average and mean range , Set up control chart for
average and calculate control limits of range chart , Calculate the coefficient of deviation

True/False
Question
For p-chart, p bar is the ratio of total number of units inspected to the total number of
units defectives.
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer


Question
Which of the following is the most popular technique for Project Production?
Correct Answer
PERT & CPM
Your Answer
Break Even Analysis

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some maintenance related characteristics by
making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Internal inspection

Multiple Choice Single Answer


Question
Process Engineer does not get sufficient time for designing tooling for most economic
production run when
Correct Answer
Delivery time is less
Your Answer
Delivery time is less

Multiple Choice Single Answer


Question
How dummy activities are shown in the time chart during project scheduling?
Correct Answer
Vertical lines
Your Answer
Dotted lines

True/False
Question
The control chart for number of defectives is more convenient to make than control chart
for fraction defectives sincethe fugure of number of defectives units can be directly taken
from the inspection report.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Availability of excellent transportation and communication facilities

Multiple Choice Multiple Answer


Question
Which utilities are considered as infrastructural requirements?
Correct Answer
Disposal of waste , Power , Water
Your Answer
Power , Labour , Water

Multiple Choice Single Answer


Question
What do you understand by the timeframe for the maintenance needs of the equipment?
Correct Answer
Maintenance inspection schedule
Your Answer
Maintenance inspection schedule

Multiple Choice Multiple Answer


Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Tool wear , Errors in setting

Multiple Choice Single Answer


Question
Which of the following policies is advisable in case of low product variety and large
volumes?
Correct Answer
Low Skilled Labour & Special Purpose Machines
Your Answer
Low Skilled Labour & Special Purpose Machines

Multiple Choice Single Answer


Question
Which phase of method study is concerned with analyzing the facts critically, generating
alternatives which form the basis for selection and development of improved methods?
Correct Answer
Critical examination
Your Answer
Critical examination

Select The Blank


Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Collaboration

Select The Blank


Question
The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of conformance

Multiple Choice Multiple Answer


Question
Gross requirement of finished product is determined on the basis of following
Correct Answer
Forecasted sales , Pending sales order , Management decision to stock
Your Answer
Pending sales order , Management decision to stock , Gross Market requirement

Select The Blank


Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer
Shutdown Maintenance
Your Answer
Working Maintenance

Select The Blank


Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer
Maintenance
Your Answer
Maintenance

Multiple Choice Single Answer


Question
Which kind of labour force is required in case of Jobbing Production?
Correct Answer
Highly Skilled
Your Answer
Highly Skilled

Select The Blank


Question
One detachable ticket is prepared for each ________.
Correct Answer
Operation
Your Answer
Operation

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Lot Tolerance Percentage Defective

Multiple Choice Multiple Answer


Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set

POM assgn
Multiple Choice Single Answer
Question
MRP is based on the concept of inventory demand which is of following type
Correct Answer
Dependent and independent
Your Answer
Dependent and independent

Multiple Choice Single Answer


Question
Main objective of a good plant layout is
Correct Answer
Reduce material handling cost
Your Answer
Reduce material handling cost

True/False
Question
As a general rule, the number of tail event of an activity is more than that of it's head
event.
Correct Answer
False
Your Answer
False

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Multiple Answer


Question
Which of the following are important considerations concerning activity times?
Correct Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Your Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.

Select The Blank


Question
The ________ pertain to the climatic conditions which the component , product or
material should withstand.
Correct Answer
Environmental specifications
Your Answer
Environmental specifications

Multiple Choice Multiple Answer


Question
Following are some of the factors considered for evaluation of alternative layouts
Correct Answer
Flow of Material , Equipment utilization , Ease of supervision
Your Answer
Flow of Material , Ease of supervision , Delivery performance

Multiple Choice Multiple Answer


Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Tool wear , Errors in setting

True/False
Question
All activities must not be tied up into the network
Correct Answer
False
Your Answer
False

Select The Blank


Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between
________.
Correct Answer
0.01 to 10%
Your Answer
0.01 to 10%

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and new
trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What is the base for considering activity time as single time estimate or three time
estimate?
Correct Answer
Level of uncertainty
Your Answer
Availability of labour

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's normal time?
Correct Answer
Normal cost
Your Answer
Normal cost

Select The Blank


Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity

Select The Blank


Question
A ________helps to avoid crowding of jobs at a particular machine by change of route of
some of the jobs or by diverting work to other machine.
Correct Answer
Control board
Your Answer
Move order

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Match The Following


Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling

Select The Blank


Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Hiring capacity

Multiple Choice Multiple Answer


Question
In an organization there may not be a formal PPC department if
Correct Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Your Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large

Multiple Choice Multiple Answer


Question
Which of the following cases can be treated as delay during recording of method study?
Correct Answer
Operators awaiting instructions from supervisor , Worker waiting for his turn at tools
stores , Jobs awaiting at the machines for their turn
Your Answer
Operators awaiting instructions from supervisor , Worker waiting for his turn at tools
stores , Jobs awaiting at the machines for their turn

True/False
Question
Inspection order is must even for simple jobs which can be inspected by shop inspector
with the tooling available on shop.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Order preparation process for products manufatured to order requires following
documents
Correct Answer
Sales Order , Work order , Shop order
Your Answer
Sales Order , Work order , Purchase order

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost
Your Answer
Reduce lead time

True/False
Question
Cent percent inspection is often more practical and economical than sampling inspection.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Scale model used for layout analysis have following advantages
Correct Answer
Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily
Your Answer
Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily

Multiple Choice Single Answer


Question
Which of the following technique is event oriented ?
Correct Answer
Project Evaluation & Review Technique
Your Answer
Project Evaluation & Review Technique

Multiple Choice Single Answer


Question
What is the meaning of " Product features" according to J.M.Juran?
Correct Answer
Quality of design
Your Answer
Quality of design

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer


Question
What are uses of diagrams in method study?
Correct Answer
Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.
Your Answer
Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.
True/False
Question
A load chart specifies the work to be carried out by each person of company during shift
hours.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Route Sheet generally contains following information
Correct Answer
Material Specification , Sequence of operation , Skill of Labour
Your Answer
Material Specification , Sequence of operation , Skill of Labour

True/False
Question
Cellular layout is based on the concept of Group Technology
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Which varaible is taken along the abscissa or X axis?
Correct Answer
Time
Your Answer
Standard deviation

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring
Multiple Choice Multiple Answer
Question
Expediting function is concerned with following activities
Correct Answer
Progress chasing to identify delays which may hold up production , Communicating
possible delays in delivery date commitment to sales department , Devising cures to
keep rate of production in line with schedule
Your Answer
Recording progress of work , Progress chasing to identify delays which may hold up
production , Communicating possible delays in delivery date commitment to sales
department

Select The Blank


Question
Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer
easier
Your Answer
time consuming

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

True/False
Question
In case of forward pass computation, the earliest event time of the first event is zero.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What is represented by an arrow in a network?
Correct Answer
Activity
Your Answer
Activity

True/False
Question
As a general rule, a site five times the actual plant size is considered minimum for
parking, access facilities and future expansion.
Correct Answer
True
Your Answer
True

True/False
Question
Independent float either affects the float of preceding activities or that of succeeding
activities.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
The document raised by PPC which authorises different functions to take action as per
instruction is called
Correct Answer
Work Order
Your Answer
Work Order

Multiple Choice Single Answer


Question
A good layout makes effective use of space. Utilization of space for a department like
Stores can be measured by
Correct Answer
Proportion of Cubic volume space utilized
Your Answer
Ratio of area utilised to area available

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Operation


C Programming
• Capital Market
• Cases in Marketing Management
• Cases in Operations Management
• Compensation Management
• Computer Fundamentals and Networking Concepts
• Consumer Behaviour
• Corporate Governance
• Customer Relationship Management (CRM)
• Data Mining
• Database Management System
• e-Business
• Economic Environment and Business
• Exim Policies and Procedures
• Financial Institutions and Banking
• Financial Management
• Human Resource Development and Training
• Human Resource Management
• Human Resource Management(For Batch of 2003 and Earlier)
• India's Foreign Trade
• Industrial and Labor Economics
• Industrial Management
• Industrial Marketing
• Industrial Relations and Labour Laws
• Industrial Safety and Security
• Industrial Safety and Security (Subjective)
• Industrial Sociology
• Insurance Accounting and IT Application in Insurance
• International Commercial Law
• International Economics
• International Finance
• International Marketing
• International Trade Logistics
• Java Programming
• Leadership and personality Development
• Legal Aspect of Insurance
• Legal Aspects of Finance
• Maintenance Management
• Management Accounting
• Management Information System
• Managerial Economics
• Marketing Management
• Marketing Management(Subjective)
• Marketing Research
• Materials Management
• Object Oriented Analysis and Design
• Operating System
• Organisational Behaviour
• Organisational Development
• Organizational Behaviour (Old Pattern)
• Performance and Potential Management
• Personnel Administration
• Principles and Practices of Management
• Production and Operations Management
• Production Planning and Control
• Project Finance
• Project Management
• Property and Liability Insurance
• Quantitative Techniques
• Research Methodology
• Research Methodology and Project Report
• Research Methodology and Statistical Quantitative Method
• Sales and Distribution
• Security Analysis And Portfolio Management
• Services Marketing and Brand Management
• Software Engineering Project Management
• Strategic Finance
• Strategic Finance Notes
• Strategic HR
• Strategic Management
• Supply Chain Management
• Taxation
• Techniques for Operations Efficiency
• Technology Management
• Total Quality Management
• TQM and HR
• TWM
• Virtual Marketing
• Web Technologies

Kontera

Join Now

Search Assignments and Papers Here...


Custom Search

Friday, September 12, 2008


Production and Operations Management - 11

POM assgn
Select The Blank
Question
The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Multiple Answer


Question
Which of the following information is available in summary of part in a chart during
methods study?
Correct Answer
Frequency of each symbol , Total time for each symbol , Total distance travelled by the
object
Your Answer
Frequency of each symbol , Total time for each symbol

True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which varaible is taken along the ordinate or Y axis?
Correct Answer
Quality
Your Answer
Quality

Multiple Choice Multiple Answer


Question
Which of the following schedules are recommended to prepare and follow as a part of
preventive maintenance system?
Correct Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule
Your Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some maintenance related characteristics by
making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Extrernal inspection

Multiple Choice Multiple Answer


Question
Which are different ways to show critical path in a network?
Correct Answer
Thick Line , Red Line , Double Line
Your Answer
Thick Line , Red Line , Double Line

Multiple Choice Multiple Answer


Question
What are the benefits of overhauling?
Correct Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares
Your Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares

Match The Following


Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Line Layout
Product Layout
Line Layout
Shop layout
Process Layout
Functional Layout
Functional Layout

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Multiple Answer


Question
Major contributors in the development of Control Charts, Sampling plan are
Correct Answer
F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of
layout
Correct Answer
False
Your Answer
True
True/False
Question
Repetitive movements between work stations which are difficult to be traced on string
diagrams can be conveniently shown on flow diagrams.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Job card

Multiple Choice Multiple Answer


Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic
Your Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Overhauling

True/False
Question
All activities lying on the non-critical paths must have total float and free float.
Correct Answer
False
Your Answer
False

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Method

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction

True/False
Question
In case of X bar-R charts,it is ensured that the assignable causes are detected before the
tolerances are violated, upper and lower statistical limits are worked out and inserted
into a chart.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective less than AQL but more than LPTD

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Semiskilled

Multiple Choice Multiple Answer


Question
Which three of the following are causes of continuous upward pattern of Xbar-R control
chart?
Correct Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt
Your Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt

True/False
Question
Root cause of most of the breakdowns is failure of the lubrication system.
Correct Answer
True
Your Answer
True

True/False
Question
It is not necessary to know spare time available on the non-critical path to allow a little
delay for noncritical activity.
Correct Answer
False
Your Answer
False

True/False
Question
MRP software generates time periodwise requiremetn of subassemblies
Correct Answer
True
Your Answer
True

True/False
Question
In case of two handed process chart, the simultaneous activities of both hands are
recorded opposite to each other on the chart.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What do you mean by CPM?
Correct Answer
Critical Path Method
Your Answer
Critical Path Method

Multiple Choice Multiple Answer


Question
Which of the following are major inputs to scheduling?
Correct Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards
Your Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards

Multiple Choice Multiple Answer


Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts
Your Answer
Over ordering , under ordering , stockouts

Multiple Choice Single Answer


Question
What do you mean by the verification of object against predetermined standards of
quality or quantity or both?
Correct Answer
Inspection
Your Answer
Inspection

Multiple Choice Multiple Answer


Question
What are the advantages of templates over diagrams?
Correct Answer
Can be conveniently moved on the graph paper , Less laborious , Saves time
Your Answer
Can be conveniently moved on the graph paper , Less laborious , Unskilled person can
do and analyze it

True/False
Question
It would not affect the project completion time if non-critical activities take little loner
time than planned.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular
Your Answer
Bell

Multiple Choice Single Answer


Question
Which is the right time to prepare stores issue order?
Correct Answer
When route sheet is ready
Your Answer
When route sheet is ready

Multiple Choice Single Answer


Question
Which element of a network represents a task which has got a definite beginning and
definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some defects in moving parts, internal
cracks, and others , when machine is under preplanned shutdown?
Correct Answer
Internal inspection
Your Answer
Internal inspection

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Dispatching

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank


Question
Goods after final inspection should accompany ________to enable dispatch department
to identify and draw correct reference.
Correct Answer
Forwarding note
Your Answer
Forwarding note

Multiple Choice Single Answer


Question
Who has introduced the useful concept of control chart in 1931?
Correct Answer
Walter Shewhart
Your Answer
Walter Shewhart

Multiple Choice Multiple Answer


Question Why graphical method of recording is preferred over the descriptive method
during method study?
Correct Answer It segregates effective part form ineffective parts , It reduces effort
involved in writing , Critical examinations easier and more effective
Your Answer Critical examinations easier and more effective , It segregates effective part
form ineffective parts , It reduces effort involved in writing

Multiple Choice Multiple Answer


Question Which are the subfactors of community facilities or social infrastructure?
Correct Answer Accomodation , Educational , Entertainment
Your Answer Accomodation , Educational , Entertainment

Select The Blank


Question The ________ is the probability that a bad lot will be accepted by the sampling
plan.
Correct Answer Consumer's risk
Your Answer Consumer's risk

Multiple Choice Multiple Answer


Question Which of the following are examples of consumption of physical effort during
recording for method study?
Correct Answer Bending , Positioning , Unloading
Your Answer Bending , Positioning , Unloading

Multiple Choice Single Answer


Question How to claculate the producer risk in the OC Curve?
Correct Answer Probability that a good lot will be rejected by the sampling
Your Answer Probability that a good lot will be rejected by the sampling

Select The Blank


Question The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer Specifications
Your Answer Specifications

Select The Blank


Question The ________ is the watch dog which ensures that every element of
production and activities which could affect the quality of end product are regulated to
the extent desirable.
Correct Answer Quality control
Your Answer Quality control

True/False
Question Expediting action is necessary if the delays and interruptions are abnormal and
hence any subsequent delay is bound to extend the promised delivery date.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Process Engineer does not get sufficient time for designing tooling for most
economic production run when
Correct Answer Delivery time is less
Your Answer Delivery time is less

Select The Blank


Question The ________ includes preventive maintenance activities whose needs are
identified through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer Shutdown Maintenance

True/False
Question Breakdown of machines, absenteeism of worker does not dislocate the
manufacturing activity in process layout
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is the maximum percentage defective that for the purpose of
sampling inspection can be considered satisfactory as a process average.
Correct Answer Acceptable quality level
Your Answer Acceptable quality level

Multiple Choice Single Answer


Question What do you mean by lowest possible direct cost required to complete an
activity within it's crashed time?
Correct Answer Crash cost
Your Answer Crash cost

Multiple Choice Multiple Answer


Question Which are the first three steps of Critical Path Analysis technique?
Correct Answer Activity relationships , Activity identification , Network construction
Your Answer Activity relationships , Activity identification , Network construction

True/False
Question Dust gets mixed with lubricants, forms an abrasive substance and causes pre-
mature failure of machinery.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which of the following can be subtypes of corrective maintenance?
Correct Answer Shutdown Maintenance , Design-out Maintenance , Design-in
Maintenance
Your Answer Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance

Select The Blank


Question The ________ is the maintenance work initiated on a result of knowledge of
the condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer Condition monitoring
Multiple Choice Single Answer
Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Production

Match The Following


Question Correct Answer Your Answer

Toung Sweet Sweet

Eye Crack Crack

Nose Burnout Burnout

Ear Impact Impact

Select The Blank


Question The ________ is a set of tools and techniques by which products are made to
comply with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system

Multiple Choice Single Answer


Question What is the meaning of " Product features" according to J.M.Juran?
Correct Answer Quality of design
Your Answer Quality of design

Multiple Choice Multiple Answer


Question Which of the following method can be used to record the facts during the
method study?
Correct Answer Micromotion study , Cyclegraph , Chronocyclegraph
Your Answer Micromotion study , Photograph , Cyclegraph , Chronocyclegraph

True/False
Question All activities must not be tied up into the network
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling plan
Your Answer Single sampling plan , Double sampling plan , Multiple sampling plan

Multiple Choice Multiple Answer


Question How many of the following are types of specification?
Correct Answer Material specifications , Dimensional specifications , Performance
specifications
Your Answer Material specifications , Dimensional specifications , Performance
specifications

Multiple Choice Multiple Answer


Question Plant layout facilitates processing of products in most effective manner through
the following
Correct Answer Shortest possible distance , Shortest processing time , Minimum
movement
Your Answer Shortest possible distance , Minimum movement

Select The Blank


Question Work study is also called ________ study
Correct Answer Time and Motion
Your Answer Time and Motion

True/False
Question Operation Process Chart provides information on time and distances
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Plant Layout is concerned with optimum arrangement of the following
Correct Answer Storage space , Machines , Material Handling Equipment
Your Answer Storage space , Machines , Sequence of operation

Multiple Choice Single Answer


Question Management often fails to realize the importance of efficient layout due to
following reason
Correct Answer losses resulting from poor layout are not directly shown in the financial
statements
Your Answer losses resulting from poor layout are not directly shown in the financial
statements

True/False
Question Inspection order is must even for simple jobs which can be inspected by shop
inspector with the tooling available on shop.
Correct Answer False
Your Answer True

True/False
Question Feasibility of time schedule requires that an activity be scheduled before any of
it's predecessors are scheduled.
Correct Answer False
Your Answer True

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

True/False
Question Planned lubrication is said to be the nervous system of the equipment.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What is the basic philosophy of statistical process control?
Correct Answer Prevention is better than cure
Your Answer Prevention is better than cure

Multiple Choice Single Answer


Question How does the control chart of statistical quality control helps the operating
personnel?
Correct Answer Identify the presence of an assignable cause before it develops
Your Answer Identify the presence of an assignable cause before it develops

Multiple Choice Single Answer


Question Where does the central line is located in case of p-chart?
Correct Answer at p bar
Your Answer at p bar

Multiple Choice Multiple Answer


Question Which of the following may be the objectives of project crashing?
Correct Answer To complete the project in the least possible time , To reduce project
cost below it's normal cost , To achieve uniformity in requirement of resources
Your Answer To complete the project in the least possible time , To reduce project cost
below it's normal cost , To achieve uniformity in requirement of resources

Select The Blank


Question The ________ advocates maintenance procedures whereby the condition of the
plant is constantly watched through systematic inspection to unearth unhealthy
conditions and preventive
Correct Answer Preventive Maintenance
Your Answer Preventive Maintenance

True/False
Question A network should be progression of activities always moving forward.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which is the ideal place to write a description of an activity in a network?
Correct Answer Above the arrow
Your Answer Above the arrow

Select The Blank


Question In case of an OC curve, the risk of rejecting a good quality lot may vary
between ________.
Correct Answer 0.01 to 10%
Your Answer 0.01 to 10%

True/False
Question For p-chart, the central line of fraction defectives is determined by average
percentage defectives.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which phase of method study is concerned with analyzing the facts critically,
generating alternatives which form the basis for selection and development of improved
methods?
Correct Answer Critical examination
Your Answer Critical examination

Multiple Choice Single Answer


Question Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines

Multiple Choice Single Answer


Question Which kind of inspection is followed in case of product layout?
Correct Answer Pilot inspection
Your Answer Pilot inspection

Match The Following


Question Correct Answer Your Answer

Emerson Efficiency Plan Wage Payment Wage Payment

Craft Facilities Planning Facilities Planning

Work Sampling Machine utilization Sampling Inspection

Gantt Chart Production Scheduling Production Scheduling

Select The Blank


Question
The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of design

Multiple Choice Multiple Answer


Question
Which of the following information is available in summary of part in a chart during
methods study?
Correct Answer
Frequency of each symbol , Total time for each symbol , Total distance travelled by the
object
Your Answer
Frequency of each symbol , Total time for each symbol

True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which varaible is taken along the ordinate or Y axis?
Correct Answer
Quality
Your Answer
Quality

Multiple Choice Multiple Answer


Question
Which of the following schedules are recommended to prepare and follow as a part of
preventive maintenance system?
Correct Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule
Your Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some maintenance related characteristics by
making use of human senses, when equipment is in operation?
Correct Answer
Extrernal inspection
Your Answer
Extrernal inspection

Multiple Choice Multiple Answer


Question
Which are different ways to show critical path in a network?
Correct Answer
Thick Line , Red Line , Double Line
Your Answer
Thick Line , Red Line , Double Line

Multiple Choice Multiple Answer


Question
What are the benefits of overhauling?
Correct Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares
Your Answer
It increases useful life of an equipment and it's parts , Advance planning allows to attend
equipment without disturbing the production programme , Advance planning allows to
prepare and keep ready the list of replacement spares

Match The Following


Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Line Layout
Product Layout
Line Layout
Shop layout
Process Layout
Functional Layout
Functional Layout

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Acceptable quality level

Multiple Choice Multiple Answer


Question
Major contributors in the development of Control Charts, Sampling plan are
Correct Answer
F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart

True/False
Question
Skill of labour force in a product type layout is usually higher than in the process type of
layout
Correct Answer
False
Your Answer
True

True/False
Question
Repetitive movements between work stations which are difficult to be traced on string
diagrams can be conveniently shown on flow diagrams.
Correct Answer
False
Your Answer
True

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Job card

Multiple Choice Multiple Answer


Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic
Your Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Overhauling

True/False
Question
All activities lying on the non-critical paths must have total float and free float.
Correct Answer
False
Your Answer
False

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Method

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Cn

Multiple Choice Multiple Answer


Question
Which are the advantages of suburban location?
Correct Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction

True/False
Question
In case of X bar-R charts,it is ensured that the assignable causes are detected before the
tolerances are violated, upper and lower statistical limits are worked out and inserted
into a chart.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective less than AQL but more than LPTD

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using
extra shift or weekly holiday is ________.
Correct Answer
Overtime working
Your Answer
Overtime working
Multiple Choice Single Answer
Question
What do you mean by lowest possible direct cost required to complete an activity within
it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Semiskilled

Multiple Choice Multiple Answer


Question
Which three of the following are causes of continuous upward pattern of Xbar-R control
chart?
Correct Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt
Your Answer
Wear of tool , Abnormal rise in temperature , Accumulation of dirt

True/False
Question
Root cause of most of the breakdowns is failure of the lubrication system.
Correct Answer
True
Your Answer
True

True/False
Question
It is not necessary to know spare time available on the non-critical path to allow a little
delay for noncritical activity.
Correct Answer
False
Your Answer
False

True/False
Question
MRP software generates time periodwise requiremetn of subassemblies
Correct Answer
True
Your Answer
True

True/False
Question
In case of two handed process chart, the simultaneous activities of both hands are
recorded opposite to each other on the chart.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What do you mean by CPM?
Correct Answer
Critical Path Method
Your Answer
Critical Path Method

Multiple Choice Multiple Answer


Question
Which of the following are major inputs to scheduling?
Correct Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards
Your Answer
Overlapping of operations , Effective Capacity per work centre , Performance standards

Multiple Choice Multiple Answer


Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts
Your Answer
Over ordering , under ordering , stockouts

Multiple Choice Single Answer


Question
What do you mean by the verification of object against predetermined standards of
quality or quantity or both?
Correct Answer
Inspection
Your Answer
Inspection

Multiple Choice Multiple Answer


Question
What are the advantages of templates over diagrams?
Correct Answer
Can be conveniently moved on the graph paper , Less laborious , Saves time
Your Answer
Can be conveniently moved on the graph paper , Less laborious , Unskilled person can
do and analyze it

True/False
Question
It would not affect the project completion time if non-critical activities take little loner
time than planned.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory
Your Answer
Factory

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular
Your Answer
Bell

Multiple Choice Single Answer


Question
Which is the right time to prepare stores issue order?
Correct Answer
When route sheet is ready
Your Answer
When route sheet is ready

Multiple Choice Single Answer


Question
Which element of a network represents a task which has got a definite beginning and
definite end?
Correct Answer
Activity
Your Answer
Activity

Multiple Choice Single Answer


Question
Which kind of preventive inspection detects some defects in moving parts, internal
cracks, and others , when machine is under preplanned shutdown?
Correct Answer
Internal inspection
Your Answer
Internal inspection

Select The Blank


Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer
Scheduling
Your Answer
Dispatching

Select The Blank


Question
The ________ is the watch dog which ensures that every element of production and
activities which could affect the quality of end product are regulated to the extent
desirable.
Correct Answer
Quality control
Your Answer
Quality control

Select The Blank


Question
Goods after final inspection should accompany ________to enable dispatch department
to identify and draw correct reference.
Correct Answer
Forwarding note
Your Answer
Forwarding note

Multiple Choice Single Answer


Question
Who has introduced the useful concept of control chart in 1931?
Correct Answer
Walter Shewhart
Your Answer
Walter Shewhart

Question Which of the following technique makes three time estimates for each activity?
Correct Answer Project Evaluation & Review Technique
Your Answer Project Evaluation & Review Technique

True/False
Question Mixed layouts are generally used in case of product is to be produced in
different sizes/types: contains too many components
Correct Answer True
Your Answer True

True/False
Question In case of two handed process chart, storage symbol is used when either hand
is used as grip or vice to hold an object.
Correct Answer True
Your Answer True

Match The Following


Question Correct Answer Your Answer

Fixation of inventory level Reorder level Reorder level

Symptom of ill planned purchasing Over ordering Over ordering

Factor influencing material planning Lead time Lead time

Net requirement of material under MRP Stock on hand Stock on hand

Multiple Choice Multiple Answer


Question Following are the commonly used factors considered for evaluation of layout in
factor analysis method
Correct Answer Flow of material , Equipment utilization , Working condition
Your Answer Flow of material , Equipment utilization , Working condition

Multiple Choice Multiple Answer


Question Which of the following are examples of pure materials?
Correct Answer Bakeries , Ice factories , Woolen
Your Answer Bakeries , Ice factories , Woolen

Multiple Choice Multiple Answer


Question Which of the following factors decide the choice between the cent percent and
sampling inspection?
Correct Answer Nature of inspection , Natural tolerance versus design tolerance ,
Vendor's quality rating
Your Answer Nature of inspection , Natural tolerance versus design tolerance , Vendor's
quality rating

Multiple Choice Single Answer


Question What do you mean by planned corrective manitenance which provides an
opportunity to undertake design modifications in the equipment to eliminate or reduce
frequency of breakdowns.
Correct Answer Design-out Maintenance
Your Answer Design-out Maintenance

Multiple Choice Single Answer


Question The product layout has following disadvantage
Correct Answer Layout is not flexible
Your Answer Layout is not flexible

Multiple Choice Multiple Answer


Question Which utilities are considered as infrastructural requirements?
Correct Answer Disposal of waste , Power , Water
Your Answer Disposal of waste , Power , Water

Multiple Choice Multiple Answer


Question Which are the factors on which the structure of the transportation cost
depends?
Correct Answer Average distance of shipment , Characteristics of the commodity ,
Medium of shipment
Your Answer Average distance of shipment , Characteristics of the commodity , Medium
of shipment

Multiple Choice Multiple Answer


Question Which are the three basic types of control chart by attribute?
Correct Answer p-chart , c-chart , np-chart
Your Answer p-chart , c-chart , np-chart

True/False
Question It would not affect the project completion time if non-critical activities take
little loner time than planned.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question A good layout makes effective use of space. Utilization of space for a
department like Stores can be measured by
Correct Answer Proportion of Cubic volume space utilized
Your Answer Proportion of Cubic volume space utilized

Multiple Choice Single Answer


Question Process planning is the process of
Correct Answer establishing shortest and most economic path of production
Your Answer establishing shortest and most economic path of production

Multiple Choice Single Answer


Question Who prepares the daily production report?
Correct Answer Shop Supervisor
Your Answer Shop Supervisor

Multiple Choice Multiple Answer


Question Which of the following are examples of gross materials?
Correct Answer Timber , Iron ore , Sugar cane
Your Answer Timber , Iron ore , Sugar cane

Multiple Choice Multiple Answer


Question Which of the following defects can be observed during preventive inspection by
using human senses?
Correct Answer Deviation from normal sound , Excessive Vibration , Leakage of a gas
Your Answer Deviation from normal sound , Excessive Vibration , Leakage of a gas

Multiple Choice Multiple Answer


Question Which of the following are the objectives of a good maintenance system?
Correct Answer Elimination of unsafe conditions , Minimisation of wear and tear of
machines , Ensuring maximum plant availability
Your Answer Elimination of unsafe conditions , Minimisation of wear and tear of machines
, Ensuring maximum plant availability

Select The Blank


Question Production control work is ________ in case of floor inspection as compared
with the centralised inspection.
Correct Answer easier
Your Answer easier

Select The Blank


Question The easiest way to bring the delayed job within the promised delivery time by
using extra shift or weekly holiday is ________.
Correct Answer Overtime working
Your Answer Overtime working

True/False
Question Latest starting date is the latest finishing time minus activity duration.
Correct Answer True
Your Answer True

Select The Blank


Question In case of an OC curve, the risk of rejecting a good quality lot may vary
between ________.
Correct Answer 0.01 to 10%
Your Answer 0.01 to 10%

Select The Blank


Question The ________ advocates maintenance procedures whereby the condition of the
plant is constantly watched through systematic inspection to unearth unhealthy
conditions and preventive
Correct Answer Preventive Maintenance
Your Answer Preventive Maintenance

Select The Blank


Question The ________ breakdowns usually cost more, partly due to damage done to
the adjustment components and partly due to emergency actions.
Correct Answer Unexpected
Your Answer Unexpected

Select The Blank


Question The term ________ emplies the foregone profit due to inability of company to
produce.
Correct Answer Opportunity cost
Your Answer Opportunity cost

Multiple Choice Single Answer


Question Process type layout is suitable when
Correct Answer there is wide variation in processing time of operations
Your Answer there is wide variation in processing time of operations

Select The Blank


Question The ________ is the process of withdrawing the equipment from the
production line, dismantling it unitwise, visualising defects, effecting adjustments,
replacing worn-out parts and finally building it up to get desired accuracies.
Correct Answer Reconditioning
Your Answer Reconditioning
True/False
Question One major difference between CPM and PERT is the former's adaptability for
the projects where high degree of uncertainty prevails and activity times during
performance are expected to vary considerably for certain activities.
Correct Answer False
Your Answer False

True/False
Question Kanban system is essentially a computer based system for production
scheduling and control
Correct Answer False
Your Answer False

Select The Blank


Question The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer Lot Tolerance Percentage Defective
Your Answer Lot Tolerance Percentage Defective

Multiple Choice Single Answer


Question How dummy activities are shown in the time chart during project scheduling?
Correct Answer Vertical lines
Your Answer Dotted lines

Match The Following


Question Correct Answer Your Answer

Factor Analysis Method to evaluate layouts Method to evaluate layouts

Minimization of production delays Objective of good layout Objective of good layout

Maximum visibility Principles of good layout Principles of good layout

Scale model Layout analysis Layout analysis

Multiple Choice Multiple Answer


Question In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are performed by
the line staff , Number of workmen is not very large
Your Answer Work is highly repetitive in nature , Planning activities are performed by the
line staff , Number of workmen is not very large

Multiple Choice Multiple Answer


Question Which three of the following are causes of continuous upward pattern of Xbar-R
control chart?
Correct Answer Wear of tool , Abnormal rise in temperature , Accumulation of dirt
Your Answer Wear of tool , Abnormal rise in temperature , Accumulation of dirt

True/False
Question A network should employ only those dummy activities which are absolutely
necessary.
Correct Answer True
Your Answer True
Select The Blank
Question The ________ includes preventive maintenance activities whose needs are
identified through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer Shutdown Maintenance

Multiple Choice Single Answer


Question What do you understand by identification of defects in materials, components,
machining processes or men to fix responsibility of defectives, thereby preventing or
minimising occurance of defectives?
Correct Answer Preventive function
Your Answer Preventive function

Select The Blank


Question OC curve of ideal sampling plan suggests that all lots less than 3% defectives
have the probability of acceptance of ________.
Correct Answer One
Your Answer One

Select The Blank


Question A set of activities to keep an equipment in the specified condition is called as
________.
Correct Answer Maintenance
Your Answer Maintenance

Multiple Choice Single Answer


Question One of the external factors influencing Material Planning is
Correct Answer Price trends
Your Answer Price trends

Multiple Choice Multiple Answer


Question What is indicated by the erratic pattern points falling above and below the
control limits in the Xbar-R-control chart?
Correct Answer Defects in materials , Poorly trained operators , Frequent adjustments of
machines
Your Answer Defects in materials , Poorly trained operators , Frequent adjustments of
machines

True/False
Question Inspection should be conducted prior to an operaion, after whose completion
no rework whatsoever is possible.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What do you mean by CPM?
Correct Answer Critical Path Method
Your Answer Critical Path Method

True/False
Question Planned lubrication is said to be the nervous system of the equipment.
Correct Answer True
Your Answer True

True/False
Question In case of X bar-R charts,it is ensured that the assignable causes are detected
before the tolerances are violated, upper and lower statistical limits are worked out and
inserted into a chart.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Provision of drainage facilities is important for the following type of industry
Correct Answer Chemical Process
Your Answer Chemical Process

Question How the concept of float is helpful to planners?


Correct Answer To minimize the requirement of resources , To prevent peaks and valleys
in requirement of resources , To decide priorities in allocation of resources
Your Answer To decide priorities in allocation of resources , To minimize the requirement
of resources , To prevent peaks and valleys in requirement of resources

True/False
Question Floor inspection delays the identification of faults which can not be rectified
immediately before large lots are spoiled.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question What is the location of lower control limit in the X bar-R control chart?
Correct Answer 3 standard deviations below central line
Your Answer 3 standard deviations below central line

Multiple Choice Multiple Answer


Question Which of the following variables which operate periodically are the reasons for
the cyclic pattern depicting peaks and valleys during Xbar-R control chart?
Correct Answer Wornout positions , Fatigue , Roller eccentricity
Your Answer Wornout positions , Fatigue , Roller eccentricity

Select The Blank


Question The ________ pertain to the climatic conditions which the component , product
or material should withstand.
Correct Answer Environmental specifications
Your Answer Environmental specifications

Multiple Choice Multiple Answer


Question Order preparation process for products manufatured to order requires following
documents
Correct Answer Sales Order , Work order , Shop order
Your Answer Sales Order , Work order , Shop order

Multiple Choice Single Answer


Question What do you understand by the measurement of work to establish allowed time
for a job for the defined method?
Correct Answer Work measurement
Your Answer Work measurement

True/False
Question Suburban location provides the compromise netween rural and urban locations.
Correct Answer True
Your Answer True

Match The Following


Question Correct Answer Your Answer

Scale model Layout analysis Technique for evolving and analysis of layouts

Factor Analysis Method to evaluate layouts Method to evaluate layouts

Minimization of production delays Objective of good layout Objective of good layout

Maximum visibility Principles of good layout Principles of good layout

Multiple Choice Multiple Answer


Question Plant Layout is concerned with optimum arrangement of the following
Correct Answer Storage space , Machines , Material Handling Equipment
Your Answer Storage space , Machines , Material Handling Equipment

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Production

True/False
Question A sampling plan which perfectly discriminates will have vertical OC curve.
Correct Answer True
Your Answer False

Multiple Choice Multiple Answer


Question Which kind of possible defectives can be reduced due to first off inspection?
Correct Answer Due to mistakes in reading blue prints , Due to errors in tooling , Due to
wrong machine set up
Your Answer Due to mistakes in reading blue prints , Due to errors in tooling , Due to
wrong machine set up

Multiple Choice Multiple Answer


Question Which of the following concepts must be understood for the achievement of
quality?
Correct Answer Quality of conformance , Purpose of product , Quality of design
Your Answer Quality of conformance , Quality of design

Multiple Choice Single Answer


Question Site factors for plant location include
Correct Answer Suitability of land
Your Answer Suitability of land

Multiple Choice Single Answer


Question The ratio of output to input of a production system is commonly known as
Correct Answer Productivity
Your Answer Productivity

Multiple Choice Multiple Answer


Question Which of the following cases indicated that the operation has occurred?
Correct Answer Movement of components to assembly section , Raw material movement
, A worker's trip to grinder to sharpen the tools
Your Answer Movement of components to assembly section , Raw material movement , A
worker's trip to grinder to sharpen the tools

Multiple Choice Single Answer


Question Which kind of gauge consists of electrical contacts operating a series of
colloured signal lamps which indicate whether the dimension is correct, oversize or
undersize?
Correct Answer Multiple gauging
Your Answer Multiple gauging

Select The Blank


Question A ________helps to avoid crowding of jobs at a particular machine by change
of route of some of the jobs or by diverting work to other machine.
Correct Answer Control board
Your Answer Forwarding note

True/False
Question Proper care and storage is not an essential part of a well planned lubrication
system.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

Multiple Choice Multiple Answer


Question Major contributors in the development of Control Charts, Sampling plan are
Correct Answer F H Dodge , H G Roming , Walter Schewhart
Your Answer F H Dodge , Walter Schewhart , L H C Tippet

Multiple Choice Single Answer


Question How to claculate the producer risk in the OC Curve?
Correct Answer Probability that a good lot will be rejected by the sampling
Your Answer Probability that a good lot will be rejected by the sampling

Multiple Choice Single Answer


Question How many types of charts are used for the purpose of method study?
Correct Answer Four
Your Answer Eight
Multiple Choice Multiple Answer
Question Which three of the following options can be used to reduce the duration of
activity during project crashing?
Correct Answer Allocating more manpower and machines than originally planned for. ,
Working additional shifts or overtime. , Awarding work to vendors who charge extra but
expedite deliveries.
Your Answer Allocating more manpower and machines than originally planned for. ,
Working additional shifts or overtime. , Awarding work to vendors who charge extra but
expedite deliveries.

Multiple Choice Single Answer


Question What does head of an arrow represent?
Correct Answer End of an activity
Your Answer End of an activity

Match The Following


Question Correct Answer Your Answer

Combined Layout Mixed Layout Project Layout

Fixed Position Layout Project Layout job layout

Product Layout Line Layout Mixed Layout

Process Layout Functional Layout Functional Layout

Multiple Choice Single Answer


Question How to reveal the capability of the sampling plan to discriminate between good
lots and bad lots?
Correct Answer Operating characteristics curve ( OC )
Your Answer Operating characteristics curve ( OC )

Select The Blank


Question The ________ is the maintenance work initiated on a result of knowledge of
the condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer Condition monitoring

Select The Blank


Question The ________ is the probability that a good lot will be rejected by the sampling
plan.
Correct Answer Producer's risk
Your Answer Producer's risk

Multiple Choice Multiple Answer


Question Which of the following are minimum requirement for a good quality of design?
Correct Answer Resonable procurement time , Resonable cost , Resonable manufacturing
time
Your Answer Resonable cost , Resonable procurement time , Resonable manufacturing
time
Select The Blank
Question The ________ is a set of tools and techniques by which products are made to
comply with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system

Select The Blank


Question The ________ is necessary when the job requires detailed of one or more of
the job characteristics with the help of special equipment which is not available at the
producing company.
Correct Answer Inspection order
Your Answer Inspection order

True/False
Question Delay in completion of projects result in unwelcome additions to the fixed
manufacturing expenses.
Correct Answer True
Your Answer True

Select The Blank


Question One detachable ticket is prepared for each ________.
Correct Answer Operation
Your Answer Operation

True/False
Question Objective of Work Study is to improve Productivity
Correct Answer True
Your Answer False

True/False
Question As a general rule, the number of tail event of an activity is more than that of
it's head event.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question How critical activities are shown in the time chart during project scheduling?
Correct Answer Solid lines
Your Answer Solid lines

Multiple Choice Multiple Answer


Question Which of the following products should be produced by using mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer Refrigerator , Tyre for automobile , Television Set

Select The Blank


Question Work study is also called ________ study
Correct Answer Time and Motion
Your Answer Time and Motion

Multiple Choice Multiple Answer


Question What are the benefits of reconditioning?
Correct Answer Eliminates problems and frequent breakdowns , Increases life of an
equipment , It helps to plan requirement of replacement spares
Your Answer Eliminates problems and frequent breakdowns , Increases life of an
equipment , It helps to plan requirement of replacement spares

Select The Blank


Question A good maintenance system is not a luxary but a ________.
Correct Answer Necessity
Your Answer Necessity

Multiple Choice Single Answer


Question Which of the following technique is event oriented ?
Correct Answer Project Evaluation & Review Technique
Your Answer Project Evaluation & Review Technique

Multiple Choice Multiple Answer


Question Which of the following is not the characteristic of Project Production?
Correct Answer Continuous flow of material , Highly mechanised material handling ,
Virtually zero manufacturing cycle time
Your Answer Continuous flow of material , Highly mechanised material handling ,
Virtually zero manufacturing cycle time

True/False
Question Breakdown of a machine is normally accompanied by added machine setup cost
such as resetting of jobs or change of jobs.
Correct Answer True
Your Answer True

True/False
Question The problems of congestion, bottlenecks and backtracking can not be visualized
by using templates and models.
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Which of the following are illustrations of inspection?
Correct Answer Physical count of incoming material against the quantity mentioned in
delivery challan , A dimensional check with measuring instrument , Visual check of burrs
and finish
Your Answer Physical count of incoming material against the quantity mentioned in
delivery challan , Visual check of burrs and finish , Check the operator performance

POM assgn
True/False
Question
Site selection should also take into account topography and soil structure of the land.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Which manufacturing method is ideal for the use of air gauges as inspection device?
Correct Answer
Mass
Your Answer
Batch

True/False
Question
Kanban system is essentially a computer based system for production scheduling and
control
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer


Question
Which are three different bases to establish an activity time?
Correct Answer
Past experience , Judgement , Historical data
Your Answer
Past experience , Judgement , Historical data

True/False
Question
Inspection order is must even for simple jobs which can be inspected by shop inspector
with the tooling available on shop.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
Which of the following policies is advisable in case of low product variety and large
volumes?
Correct Answer
Low Skilled Labour & Special Purpose Machines
Your Answer
Semiskilled Labour & General Purpose Machines

Select The Blank


Question
Capacity decisions have a direct influence on performance of production system in
respect of ________
Correct Answer
Delivery performance
Your Answer
Delivery performance

True/False
Question
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and new
trial control limits for the remaining points are computed.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ pertain to the climatic conditions which the component , product or
material should withstand.
Correct Answer
Environmental specifications
Your Answer
Environmental specifications

Select The Blank


Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer
Inspection order
Your Answer
Job card

Match The Following


Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity
Tn
Cn
Crash time of activity
Tc
Tc
Normal cost of an activity
Cn
Tn

True/False
Question
Lubrication survey should never be done for a new machine.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs

Multiple Choice Single Answer


Question
Out of two basic criteria for the selection of a manufacturing method, one is, it must be
able to meet the specifications of final product and the other is, it must be
Correct Answer
Cost effective method
Your Answer
Cost effective method

Multiple Choice Multiple Answer


Question
Which of the following is a part of preparing manufacturing order set as a primary
function of dispatching?
Correct Answer
Operational layouts , Move orders , Pre-filled stores issue orders
Your Answer
Operational layouts , Move orders , Pre-filled stores issue orders

Select The Blank


Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Hiring capacity

Multiple Choice Multiple Answer


Question
Which are the major types of defects?
Correct Answer
Minor , Major , Critical
Your Answer
Minor , Critical , General

Multiple Choice Single Answer


Question
Which kind of labour force is required in case of Jobbing Production?
Correct Answer
Highly Skilled
Your Answer
Highly Skilled

Multiple Choice Multiple Answer


Question
Which are the sources of information to update the progress card daily?
Correct Answer
Detachable ticket , Daily production report , Job Card
Your Answer
Detachable ticket , Daily production report , Job Card

True/False
Question
In case of forward pass computation, the earliest event time of the first event is zero.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Which are the distinct functions of scientific quality control?
Correct Answer
Acceptance function , Preventive function , Assurance function
Your Answer
Acceptance function , Preventive function , Assurance function

Multiple Choice Multiple Answer


Question
Which of the following are examples of specifications?
Correct Answer
Commercial standards , Assembly and testing instructions , Bill of material
Your Answer
Production schedule , Commercial standards , Bill of material

Multiple Choice Single Answer


Question
Technique which can help an organization to reduce inventory is called
Correct Answer
MRP
Your Answer
MRP

Multiple Choice Single Answer


Question
In case of Batch Production which kind of labour is expected?
Correct Answer
Skilled in one specific Manufacturing Process
Your Answer
Semiskilled

Multiple Choice Multiple Answer


Question
Major contributors in the development of Control Charts, Sampling plan are
Correct Answer
F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart

Multiple Choice Single Answer


Question
What is represented by an arrow in a network?
Correct Answer
Activity
Your Answer
Event

True/False
Question
Feasibility of time schedule requires that an activity be scheduled before any of it's
predecessors are scheduled.
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer


Question
Which method of critical path determination begins with the end event and moves
backward to the start event of the project network?
Correct Answer
Backward pass computation
Your Answer
Backward pass computation

True/False
Question
Operation process charts though indicates the sequence of events but do not show
movements.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Which kind of relationship exists between those activities which can be carried out
simultaneously and both activities require definite time to finish?
Correct Answer
Concurrent activities
Your Answer
Concurrent activities

True/False
Question
One major difference between CPM and PERT is the former's adaptability for the projects
where high degree of uncertainty prevails and activity times during performance are
expected to vary considerably for certain activities.
Correct Answer
False
Your Answer
False
Multiple Choice Multiple Answer
Question
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen
Your Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen

Multiple Choice Single Answer


Question
Inadequate production capacity ultimately leads to
Correct Answer
Poor Customer Service
Your Answer
Poor Machine Utilization

Multiple Choice Multiple Answer


Question
Which of the following schedules are recommended to prepare and follow as a part of
preventive maintenance system?
Correct Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule
Your Answer
Preventive inspection schedule , Cleaning and upkeep schedule , Lubrication schedule

Multiple Choice Single Answer


Question
What is the reason of fluctuations, if the control chart evaluates that the process is in a
state of statistical control?
Correct Answer
Random variability
Your Answer
Random variability

True/False
Question
Even in a small set up wherein maintenance of a machine is looked after by a mechanic
cum worker, he should report directly to the person responsible for the manufacturing
operations.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
What do you mean by the chart on which the major activities and entry points of
materials are recorded to have graphic view of operations and inspections involved in the
process?
Correct Answer
Operation process chart
Your Answer
Operation process chart

Multiple Choice Single Answer


Question
Plant Layout decisions are considered to be
Correct Answer
Strategic
Your Answer
Strategic

Multiple Choice Multiple Answer


Question
What are the uses of the instruction manual provided by the manufacturer of a machine?
Correct Answer
It gives instructions regarding installation and operation of the equipment , It contains
note on common troubles with causes and remedies for troubleshooting , It enlists
points, frequency and type of lubrication
Your Answer
It gives instructions regarding installation and operation of the equipment , It contains
note on common troubles with causes and remedies for troubleshooting , It enlists
points, frequency and type of lubrication

Multiple Choice Single Answer


Question
When should operator or supervisor is supposed to sign the perforated route sheet?
Correct Answer
After completion of operation
Your Answer
After completion of operation

Multiple Choice Multiple Answer


Question
Which of the following situations demand that the human consideration should be given
preference over other considerations?
Correct Answer
Inconsistent earnings where the earnings are tied to output , Poor morale evidenced by
petty or trivial complaints , Repeated cases of accidents and health hazards
Your Answer
Excessive rejections , Poor morale evidenced by petty or trivial complaints , Repeated
cases of accidents and health hazards

True/False
Question
A network can have more than one starting event but completion event must be only
one.
Correct Answer
False
Your Answer
True

Multiple Choice Single Answer


Question
Which is the ideal place to write a description of an activity in a network?
Correct Answer
Above the arrow
Your Answer
Above the arrow

Multiple Choice Multiple Answer


Question
Which features should be covered by the specifications of materials while defining the
qualitative requirement?
Correct Answer
Material composition , Dimensions , Any heat treatment if required
Your Answer
Material composition , Dimensions , Any heat treatment if required

Match The Following


Question
Correct Answer
Your Answer
When to inspect
Stages of inspection
Stages of inspection
What to inspect
Specification
Specification
How to inspect
Inspection devices
Inspection devices
How much to inspect
Sampling or cent percent inspection
Sampling or cent percent inspection

Multiple Choice Multiple Answer


Question
How the concept of float is helpful to planners?
Correct Answer
To decide priorities in allocation of resources , To minimize the requirement of resources
, To prevent peaks and valleys in requirement of resources
Your Answer
To decide priorities in allocation of resources , To minimize the requirement of resources
, To prevent peaks and valleys in requirement of resources

Multiple Choice Single Answer


Question
One of the sophisticated operations research techniques used in material planning is
Correct Answer
Dynamic programming
Your Answer
Dynamic programming

True/False
Question
Job life is one of the factors that influence Process Planning
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer


Question
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen
Your Answer
Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen

Multiple Choice Single Answer


Question
Product layout is employed for manufacturing following products
Correct Answer
refrigirators
Your Answer
ships

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Job

Multiple Choice Multiple Answer


Question
Which of the following situations demand the technical consideration while selecting a
job for method study?
Correct Answer
Jobs having inconsistent quality , Operations inviting frequent requests from supervisors
for relaxation in allowed time because of variations in materials and tool performance ,
Jobs in which too many man-hours are spend in checking and rechecking work
Your Answer
Jobs having inconsistent quality , Operations inviting frequent requests from supervisors
for relaxation in allowed time because of variations in materials and tool performance ,
Jobs in which too many man-hours are spend in checking and rechecking work

True/False
Question
Quality control determines what, when, and how much to inspect while inspection
actually conducts examination of goods.
Correct Answer
True
Your Answer
True

Select The Blank


Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Producer's risk

Select The Blank


Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer
Opportunity cost
Your Answer
Opportunity cost

True/False
Question
All activities must not be tied up into the network
Correct Answer
False
Your Answer
False

True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Which of the following may be the objectives of project crashing?
Correct Answer
To achieve uniformity in requirement of resources , To complete the project in the least
possible time , To reduce project cost below it's normal cost
Your Answer
To complete the project in the least possible time , To achieve uniformity in requirement
of resources , To improve the labour efficiency

Multiple Choice Multiple Answer


Question
What is indicated by the hugging points lying close to mean of the process in X bar-R-
control chart?
Correct Answer
Biases in measurements , Recording done without actual measurements , Improper
selection of samples
Your Answer
Recording done without actual measurements , Improper selection of samples

Multiple Choice Single Answer


Question
Following is one of the techniques used for Material Planning for high value material
Correct Answer
MRP
Your Answer
MRP

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk

Multiple Choice Single Answer


Question
One of the characterstic of layout is about the flow of material / personnel. In a good
layout the flow should be
Correct Answer
Unidirectional
Your Answer
Unidirectional

True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False

Multiple Choice Multiple Answer


Question
Material Requirement Planning is very useful in following situations
Correct Answer
Long Lead time for procurement , Several levels of assemblies in product , Long
manufacturing cycle
Your Answer
Long Lead time for procurement , Several levels of assemblies in product , Long
manufacturing cycle

True/False
Question
Cent percent inspection is often more practical and economical than sampling inspection.
Correct Answer
False
Your Answer
False
Select The Blank
Question
The ________ must ensure that the product satisfy the functional requirements of it's
usage.
Correct Answer
Quality of design
Your Answer
Quality of conformance

True/False
Question
Both, preventive and breakdown maintenance work must be assigned to the same team.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer


Question
Following is one of the tasks of Production Control
Correct Answer
Actual issue of forms and documents
Your Answer
Actual issue of forms and documents

Multiple Choice Single Answer


Question
Process Engineer does not get sufficient time for designing tooling for most economic
production run when
Correct Answer
Delivery time is less
Your Answer
Delivery time is less

Multiple Choice Multiple Answer


Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Production Planning , Manpower Planning

Multiple Choice Multiple Answer


Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set

Multiple Choice Single Answer


Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer
Operation
Your Answer
Manufacturing

Select The Blank


Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity

Multiple Choice Single Answer


Question
What is the specific name for the Gantt chart when it shows at a glance the scheduling of
various operations involved in a job?
Correct Answer
Job Schedule
Your Answer
Load Chart

Select The Blank


Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer
Maintenance
Your Answer
Maintenance

Multiple Choice Single Answer


Question
What do you mean by lowest possible direct cost required to complete an activity within
it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost

Multiple Choice Multiple Answer


Question
Which of the following factors decide the choice between the cent percent and sampling
inspection?
Correct Answer
Nature of inspection , Natural tolerance versus design tolerance , Vendor's quality rating
Your Answer
Nature of inspection , Natural tolerance versus design tolerance , Vendor's quality rating

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring

Multiple Choice Multiple Answer


Question
Which of the following are examples of attributes?
Correct Answer
Cracks , Burrs , Texture
Your Answer
Cracks , Burrs , Texture

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective more than AQL but less than LPTD

Multiple Choice Single Answer


Question
In mass/batch production organizations where goods are produced for stocking, Work
Order is raised on the basis of
Correct Answer
Sales Programme
Your Answer
Sales Order

Match The Following


Question
Correct Answer
Your Answer
Fixed Position Layout
Project Layout
Functional Layout
Product Layout
Line Layout
Project Layout
Process Layout
Functional Layout
job layout
Combined Layout
Mixed Layout
Mixed Layout

Multiple Choice Single Answer


Question
What do you understand by the measurement of work to establish allowed time for a job
for the defined method?
Correct Answer
Work measurement
Your Answer
Work measurement

Select The Blank


Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between
________.
Correct Answer
0.01 to 10%
Your Answer
0.01 to 10%

True/False
Question
Objective of Work Study is to improve Productivity
Correct Answer
True
Your Answer
False

Multiple Choice Multiple Answer


Question
Which are the distinct functions of scientific quality control?
Correct Answer
Acceptance function , Preventive function , Assurance function
Your Answer
Acceptance function , Feedback function , Preventive function

Match The Following


Question
Correct Answer
Your Answer
Interruption for machine utilisation
Preventive maintenance
Preventive maintenance
Input for scheduling
Overlapping of operations
Strings
Technique of scheduling
Critical Path Analysis
Critical Path Analysis
Scheduling Device
Strings
Blackboard

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular
Your Answer
Rectangular

True/False
Question
Breakdown of machines, absenteeism of worker does not dislocate the manufacturing
activity in process layout
Correct Answer
True
Your Answer
True

True/False
Question
Since value of c can never be negativee, hence" if LCLp works out to be negative, it is
taken as zero."
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer


Question
Who prepares the daily production report?
Correct Answer
Shop Supervisor
Your Answer
Worker

True/False
Question
The dispatching function is of very importance in flow and mass production units.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer


Question
Which are major benefits of identifying the critical path?
Correct Answer
It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It identifies activities to be given preference in
allocation of resources. , It helps to exercise "control by exception".
Your Answer
It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It helps to exercise "control by exception".

True/False
Question Three time estimates are transformed into expected time before using it into a
network.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Technique of Value Engineering can be effectively employed in design of a
product to
Correct Answer To meet the intended function at lowest cost
Your Answer To meet the intended function at lowest cost

Multiple Choice Single Answer


Question A good plant layout helps in
Correct Answer Reducing handling costs
Your Answer Reducing handling costs

True/False
Question During set up of X bar-R control chart, control limts should be practically
revised from time to time as additional data is accumulated.
Correct Answer True
Your Answer True

True/False
Question It is not necessary to know spare time available on the non-critical path to
allow a little delay for noncritical activity.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question Which method is used to trace especially those movements which are too fast
for human eye to pursue?
Correct Answer Cyclegraph
Your Answer Cyclegraph

Multiple Choice Multiple Answer


Question Following are some of the factors considered for evaluation of alternative
layouts
Correct Answer Flow of Material , Equipment utilization , Ease of supervision
Your Answer Flow of Material , Equipment utilization , Ease of supervision

Multiple Choice Single Answer


Question When should operator or supervisor is supposed to sign the perforated route
sheet?
Correct Answer After completion of operation
Your Answer After completion of operation

Select The Blank


Question Duration of each activity is referred to as ________.
Correct Answer Activity time
Your Answer Activity time

Multiple Choice Multiple Answer


Question How many of the following are types of specification?
Correct Answer Material specifications , Dimensional specifications , Performance
specifications
Your Answer Material specifications , Dimensional specifications , Performance
specifications

Multiple Choice Multiple Answer


Question Which of the following factors related to the labour and wages are considered
while deciding the plant location?
Correct Answer Prevailing wage pattern , Productivity of labour , Industrial relations
Your Answer Prevailing wage pattern , Productivity of labour , Industrial relations

Multiple Choice Single Answer


Question What do you mean by lowest possible direct cost required to complete an
activity within it's crashed time?
Correct Answer Crash cost
Your Answer Crash cost

True/False
Question While numbering as per Fulkerson's rule, arrows emerging from the initial
event are deleted so as to create one or more initial events.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Inadequate production capacity ultimately leads to
Correct Answer Poor Customer Service
Your Answer Poor Customer Service

Multiple Choice Multiple Answer


Question Which of the following are examples of pure materials?
Correct Answer Bakeries , Ice factories , Woolen
Your Answer Bakeries , Ice factories , Woolen

Multiple Choice Single Answer


Question In case of Batch Production which kind of labour is expected?
Correct Answer Skilled in one specific Manufacturing Process
Your Answer Skilled in one specific Manufacturing Process

Multiple Choice Multiple Answer


Question Which of the following products should be produced by using mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer Refrigerator , Tyre for automobile , Television Set

True/False
Question Objective of Work Study is to improve Productivity
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Operation

Multiple Choice Single Answer


Question Which document is used for returning the surplus material?
Correct Answer Stores Return Note
Your Answer Stores Return Note

True/False
Question For p-chart, fraction defective units in each sample is calculated by dividing
number of defectives by the number of pieces in the sample.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Material control function of PPC is concerned with
Correct Answer Preparation of material estimates
Your Answer Preparation of material estimates

Multiple Choice Multiple Answer


Question Which of the following are examples of gross materials?
Correct Answer Timber , Iron ore , Sugar cane
Your Answer Timber , Iron ore , Sugar cane

Match The Following


Question Correct Answer Your Answer

First off inspection First piece produced after tool change First piece produced after tool
change

Critical operation inspection After whose no rework is possible After whose no rework is
possible

Patrolling inspection Inspection at the place of actual production Inspection at the place
of actual production

Key operation inspection Costlier operation Costlier operation

Multiple Choice Single Answer


Question Technique which can help an organization to reduce inventory is called
Correct Answer MRP
Your Answer MRP

Match The Following


Question Correct Answer Your Answer

When to inspect Stages of inspection Stages of inspection

What to inspect Specification Specification

How to inspect Inspection devices Inspection devices

How much to inspect Sampling or cent percent inspection Sampling or cent percent
inspection
Multiple Choice Single Answer
Question Where the ignorance towards the degradation of machine leads to?
Correct Answer Eventual breakdown
Your Answer Eventual breakdown

Multiple Choice Multiple Answer


Question What are uses of diagrams in method study?
Correct Answer Study different plant layouts and select the most optimum one , Study
the extent of traffic over the different routes of the plant , Identify the extent of
backtracking, cross traffic and obstacles encountered during the movement of material.
Your Answer Study different plant layouts and select the most optimum one , Study the
extent of traffic over the different routes of the plant , Identify the extent of
backtracking, cross traffic and obstacles encountered during the movement of material.

Multiple Choice Single Answer


Question Where does the SPC exercises the control to prevent the occurances of
defectives?
Correct Answer On manufacturing process
Your Answer On manufacturing process

True/False
Question Sampling inspection is best suited when cost of inspection is much higher than
the loss arising from the acceptance of a defective part.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which are the factors on which the structure of the transportation cost
depends?
Correct Answer Average distance of shipment , Characteristics of the commodity ,
Medium of shipment
Your Answer Average distance of shipment , Characteristics of the commodity , Medium
of shipment

Multiple Choice Single Answer


Question What do you mean by lowest possible direct cost required to complete an
activity within it's normal time?
Correct Answer Normal cost
Your Answer Normal cost

Multiple Choice Single Answer


Question One of the external factors influencing Material Planning is
Correct Answer Price trends
Your Answer Price trends

Select The Blank


Question The easiest way to bring the delayed job within the promised delivery time by
using extra shift or weekly holiday is ________.
Correct Answer Overtime working
Your Answer Overtime working

True/False
Question MRP software generates time periodwise requiremetn of subassemblies
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

Multiple Choice Single Answer


Question Gross requirement of products is determined on the basis of
Correct Answer Both forecast and pending orders
Your Answer Both forecast and pending orders

Multiple Choice Multiple Answer


Question In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are performed by
the line staff , Number of workmen is not very large
Your Answer Work is highly repetitive in nature , Planning activities are performed by the
line staff , Number of workmen is not very large

True/False
Question It pays in the long run to inform the customer regarding expected delays in the
deliveries.
Correct Answer True
Your Answer True

True/False
Question Repetitive movements between work stations which are difficult to be traced on
string diagrams can be conveniently shown on flow diagrams.
Correct Answer False
Your Answer True

Multiple Choice Single Answer


Question Production Planning includes
Correct Answer Predetermination of manufacturing requirements
Your Answer Predetermination of manufacturing requirements

Multiple Choice Multiple Answer


Question Which of the following factors decide the choice between the cent percent and
sampling inspection?
Correct Answer Nature of inspection , Natural tolerance versus design tolerance ,
Vendor's quality rating
Your Answer Nature of inspection , Natural tolerance versus design tolerance , Vendor's
quality rating

Multiple Choice Single Answer


Question The ratio of output to input of a production system is commonly known as
Correct Answer Productivity
Your Answer Productivity

Multiple Choice Multiple Answer


Question Which of the following symbols are used in flow process chart but not used in
operation process chart?
Correct Answer Storage , Delay , Transport
Your Answer Storage , Delay , Transport

Multiple Choice Multiple Answer


Question Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling plan
Your Answer Single sampling plan , Double sampling plan , Multiple sampling plan

Multiple Choice Single Answer


Question What do you understand by totality of features and characteristics of a product
or service that bears on it's ability to satisfy the customer?
Correct Answer Quality
Your Answer Quality

Multiple Choice Multiple Answer


Question Which of the following processes or activities are denoted by using symbols
while recording in method study?
Correct Answer Transport , Delay , Storage

Question What do you mean by the project duration for which the total cost is minimum?
Correct Answer Optimum duration
Your Answer Optimum duration

Multiple Choice Multiple Answer


Question Lack of material planning results in the following
Correct Answer Over ordering , under ordering , stockouts
Your Answer under ordering , stockouts , Over ordering

Multiple Choice Single Answer


Question Which kind of defect can be called as minor defect?
Correct Answer Which does not reduce the usability of the product for its intended use
Your Answer Which does not reduce the usability of the product for its intended use

Multiple Choice Single Answer


Question What does CPA stand for?
Correct Answer Critical Path Analysis
Your Answer Critical Project Analysis

True/False
Question Grouping of machines gives a lot of flexibility in loading and scheduling
Correct Answer True
Your Answer True

True/False
Question Fixed cost is lower in case of continuous production than intermittent
production.
Correct Answer False
Your Answer False

Select The Blank


Question Function concerned with fixation of time allowed to qualified worker for a job is
called ________.
Correct Answer Work Measurement
Your Answer Time Measurement

Select The Blank


Question The design of any layout is governed by large number of factors and the best
layout is expected to ________ all these factors.
Correct Answer Optimise
Your Answer Consider

Multiple Choice Multiple Answer


Question Which of the following is not the characteristic of Project Production?
Correct Answer Continuous flow of material , Highly mechanised material handling ,
Virtually zero manufacturing cycle time
Your Answer Continuous flow of material , Highly mechanised material handling ,
Virtually zero manufacturing cycle time

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Operation

Multiple Choice Multiple Answer


Question Which of the following cases can be treated as delay during recording of
method study?
Correct Answer Operators awaiting instructions from supervisor , Worker waiting for his
turn at tools stores , Jobs awaiting at the machines for their turn
Your Answer Operators awaiting instructions from supervisor , Worker waiting for his
turn at tools stores , Jobs awaiting at the machines for their turn

True/False
Question Root cause of most of the breakdowns is failure of the lubrication system.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which of the following are steps to identify the critical path in a small network?
Correct Answer Compare the durations of all paths to identify the longest path. , Sum up
the durations of activities along each path. , Enumerate all paths in the network and list
down activities on each path.
Your Answer Compare the durations of all paths to identify the longest path. , Sum up
the durations of activities along each path. , Enumerate all paths in the network and list
down activities on each path.

Match The Following


Question Correct Answer Your Answer

Emerson Efficiency Plan Wage Payment Wage Payment

Craft Facilities Planning Facilities Planning

Work Sampling Machine utilization Machine utilization

Gantt Chart Production Scheduling Production Scheduling

Multiple Choice Multiple Answer


Question What are the benefits of overhauling?
Correct Answer It increases useful life of an equipment and it's parts , Advance planning
allows to attend equipment without disturbing the production programme , Advance
planning allows to prepare and keep ready the list of replacement spares
Your Answer It increases useful life of an equipment and it's parts , Advance planning
allows to attend equipment without disturbing the production programme , Advance
planning allows to prepare and keep ready the list of replacement spares

True/False
Question The event numbers as far as possible reflect the logical relationships of the
activities.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Technique of Value Engineering can be effectively employed in design of a
product to
Correct Answer To meet the intended function at lowest cost
Your Answer To meet the intended function at lowest cost

True/False
Question Proper care and storage is not an essential part of a well planned lubrication
system.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question A good plant layout helps in
Correct Answer Reducing handling costs
Your Answer Reducing handling costs

Multiple Choice Multiple Answer


Question Scale model used for layout analysis have following advantages
Correct Answer Nontechnical person finds it easy to comprehend , Ovehead facilities can
be shown , Models can be shifted easily
Your Answer Nontechnical person finds it easy to comprehend , Ovehead facilities can be
shown , Models can be shifted easily

Multiple Choice Single Answer


Question The ratio of output to input of a production system is commonly known as
Correct Answer Productivity
Your Answer Productivity

Multiple Choice Multiple Answer


Question Which of the following products should be produced by using mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer Refrigerator , Tyre for automobile , Television Set

True/False
Question Theoretical capacity equals number of normal working hours of that machine.
Correct Answer True
Your Answer True

True/False
Question It is not necessary to know spare time available on the non-critical path to
allow a little delay for noncritical activity.
Correct Answer False
Your Answer False

Select The Blank


Question Production Planning is a centralised activity which includes functions such as
________
Correct Answer Scheduling
Your Answer Scheduling

True/False
Question In case of X bar-R charts,it is ensured that the assignable causes are detected
before the tolerances are violated, upper and lower statistical limits are worked out and
inserted into a chart.
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is the process of assigning calender dates to the various
operations of a job.
Correct Answer Scheduling
Your Answer Scheduling

Select The Blank


Question An Ideal OC curve is ________ shaped curve that accpets all the lots with
quality equal to or better than AQL .
Correct Answer Rectangular
Your Answer Rectangular

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

Multiple Choice Multiple Answer


Question Which of the following cases indicates change in physical characteristic?
Correct Answer Turning , Grinding , Drilling
Your Answer Turning , Grinding , Drilling

Match The Following


Question Correct Answer Your Answer

Combined Layout Mixed Layout Mixed Layout

Fixed Position Layout Project Layout Project Layout

Product Layout Line Layout Line Layout

Process Layout Functional Layout Functional Layout

Select The Blank


Question Two welknown timing methods are cumulative method and ________.
Correct Answer Fly back method
Your Answer Continuous method

Multiple Choice Single Answer


Question How many types of charts are used for the purpose of method study?
Correct Answer Four
Your Answer Eight

True/False
Question Sampling inspection suffice to check the work of line inspectors and stage
inspectors.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Where the ignorance towards the degradation of machine leads to?
Correct Answer Eventual breakdown
Your Answer Eventual breakdown

Multiple Choice Single Answer


Question One of the sophisticated operations research techniques used in material
planning is
Correct Answer Dynamic programming
Your Answer Dynamic programming

Multiple Choice Single Answer


Question Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines

True/False
Question It pays in the long run to inform the customer regarding expected delays in the
deliveries.
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is a set of tools and techniques by which products are made to
comply with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system

Select The Blank


Question A ________ is another typical chart which is used to record frequency of
movements between work centers.
Correct Answer Travel chart
Your Answer Frequency chart

True/False
Question Cent percent inspection does not mean inspection of component for 100%
quality characteristics.
Correct Answer True
Your Answer False

Multiple Choice Multiple Answer


Question Route Sheet generally contains following information
Correct Answer Material Specification , Sequence of operation , Skill of Labour
Your Answer Material Specification , Sequence of operation , Skill of Labour

Select The Blank


Question Any incentive scheme must achieve the ________ of the organisation.
Correct Answer Objectives
Your Answer Tax goals

Multiple Choice Single Answer


Question Document raised by Sales department for goods manufactured to stock is
called
Correct Answer Shipment order
Your Answer Stock order

Multiple Choice Single Answer


Question What do you understand by the timeframe for the maintenance needs of the
equipment?
Correct Answer Maintenance inspection schedule
Your Answer Maintenance inspection schedule

True/False
Question Three time estimates are transformed into expected time before using it into a
network.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What do you mean by planned corrective manitenance which provides an
opportunity to undertake design modifications in the equipment to eliminate or reduce
frequency of breakdowns.
Correct Answer Design-out Maintenance
Your Answer Design-in Maintenance

Multiple Choice Multiple Answer


Question Why graphical method of recording is preferred over the descriptive method
during method study?
Correct Answer It segregates effective part form ineffective parts , It reduces effort
involved in writing , Critical examinations easier and more effective
Your Answer Critical examinations easier and more effective , It segregates effective part
form ineffective parts , It reduces effort involved in writing

Multiple Choice Multiple Answer


Question Which are the subfactors of community facilities or social infrastructure?
Correct Answer Accomodation , Educational , Entertainment
Your Answer Accomodation , Educational , Entertainment
Select The Blank
Question The ________ is the probability that a bad lot will be accepted by the sampling
plan.
Correct Answer Consumer's risk
Your Answer Consumer's risk

Multiple Choice Multiple Answer


Question Which of the following are examples of consumption of physical effort during
recording for method study?
Correct Answer Bending , Positioning , Unloading
Your Answer Bending , Positioning , Unloading

Multiple Choice Single Answer


Question How to claculate the producer risk in the OC Curve?
Correct Answer Probability that a good lot will be rejected by the sampling
Your Answer Probability that a good lot will be rejected by the sampling

Select The Blank


Question The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer Specifications
Your Answer Specifications

Select The Blank


Question The ________ is the watch dog which ensures that every element of
production and activities which could affect the quality of end product are regulated to
the extent desirable.
Correct Answer Quality control
Your Answer Quality control

True/False
Question Expediting action is necessary if the delays and interruptions are abnormal and
hence any subsequent delay is bound to extend the promised delivery date.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Process Engineer does not get sufficient time for designing tooling for most
economic production run when
Correct Answer Delivery time is less
Your Answer Delivery time is less

Select The Blank


Question The ________ includes preventive maintenance activities whose needs are
identified through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer Shutdown Maintenance

True/False
Question Breakdown of machines, absenteeism of worker does not dislocate the
manufacturing activity in process layout
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is the maximum percentage defective that for the purpose of
sampling inspection can be considered satisfactory as a process average.
Correct Answer Acceptable quality level
Your Answer Acceptable quality level

Multiple Choice Single Answer


Question What do you mean by lowest possible direct cost required to complete an
activity within it's crashed time?
Correct Answer Crash cost
Your Answer Crash cost

Multiple Choice Multiple Answer


Question Which are the first three steps of Critical Path Analysis technique?
Correct Answer Activity relationships , Activity identification , Network construction
Your Answer Activity relationships , Activity identification , Network construction

True/False
Question Dust gets mixed with lubricants, forms an abrasive substance and causes pre-
mature failure of machinery.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which of the following can be subtypes of corrective maintenance?
Correct Answer Shutdown Maintenance , Design-out Maintenance , Design-in
Maintenance
Your Answer Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance

Select The Blank


Question The ________ is the maintenance work initiated on a result of knowledge of
the condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer Condition monitoring

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding some value to
entity can be defined as
Correct Answer Operation
Your Answer Production

Match The Following


Question Correct Answer Your Answer

Toung Sweet Sweet

Eye Crack Crack

Nose Burnout Burnout

Ear Impact Impact


Select The Blank
Question The ________ is a set of tools and techniques by which products are made to
comply with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system

Multiple Choice Single Answer


Question What is the meaning of " Product features" according to J.M.Juran?
Correct Answer Quality of design
Your Answer Quality of design

Multiple Choice Multiple Answer


Question Which of the following method can be used to record the facts during the
method study?
Correct Answer Micromotion study , Cyclegraph , Chronocyclegraph
Your Answer Micromotion study , Photograph , Cyclegraph , Chronocyclegraph

True/False
Question All activities must not be tied up into the network
Correct Answer False
Your Answer False

Multiple Choice Multiple Answer


Question Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling plan
Your Answer Single sampling plan , Double sampling plan , Multiple sampling plan

Multiple Choice Multiple Answer


Question How many of the following are types of specification?
Correct Answer Material specifications , Dimensional specifications , Performance
specifications
Your Answer Material specifications , Dimensional specifications , Performance
specifications

Multiple Choice Multiple Answer


Question Plant layout facilitates processing of products in most effective manner through
the following
Correct Answer Shortest possible distance , Shortest processing time , Minimum
movement
Your Answer Shortest possible distance , Minimum movement

Select The Blank


Question Work study is also called ________ study
Correct Answer Time and Motion
Your Answer Time and Motion

True/False
Question Operation Process Chart provides information on time and distances
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question Plant Layout is concerned with optimum arrangement of the following
Correct Answer Storage space , Machines , Material Handling Equipment
Your Answer Storage space , Machines , Sequence of operation

Multiple Choice Single Answer


Question Management often fails to realize the importance of efficient layout due to
following reason
Correct Answer losses resulting from poor layout are not directly shown in the financial
statements
Your Answer losses resulting from poor layout are not directly shown in the financial
statements

True/False
Question Inspection order is must even for simple jobs which can be inspected by shop
inspector with the tooling available on shop.
Correct Answer False
Your Answer True

True/False
Question Feasibility of time schedule requires that an activity be scheduled before any of
it's predecessors are scheduled.
Correct Answer False
Your Answer True

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of making any
product/s is called
Correct Answer Factory
Your Answer Factory

True/False
Question Planned lubrication is said to be the nervous system of the equipment.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What is the basic philosophy of statistical process control?
Correct Answer Prevention is better than cure
Your Answer Prevention is better than cure

Multiple Choice Single Answer


Question How does the control chart of statistical quality control helps the operating
personnel?
Correct Answer Identify the presence of an assignable cause before it develops
Your Answer Identify the presence of an assignable cause before it develops

Multiple Choice Single Answer


Question Where does the central line is located in case of p-chart?
Correct Answer at p bar
Your Answer at p bar

Multiple Choice Multiple Answer


Question Which of the following may be the objectives of project crashing?
Correct Answer To complete the project in the least possible time , To reduce project
cost below it's normal cost , To achieve uniformity in requirement of resources
Your Answer To complete the project in the least possible time , To reduce project cost
below it's normal cost , To achieve uniformity in requirement of resources

Select The Blank


Question The ________ advocates maintenance procedures whereby the condition of the
plant is constantly watched through systematic inspection to unearth unhealthy
conditions and preventive
Correct Answer Preventive Maintenance
Your Answer Preventive Maintenance

True/False
Question A network should be progression of activities always moving forward.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which is the ideal place to write a description of an activity in a network?
Correct Answer Above the arrow
Your Answer Above the arrow

Select The Blank


Question In case of an OC curve, the risk of rejecting a good quality lot may vary
between ________.
Correct Answer 0.01 to 10%
Your Answer 0.01 to 10%

True/False
Question For p-chart, the central line of fraction defectives is determined by average
percentage defectives.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Which phase of method study is concerned with analyzing the facts critically,
generating alternatives which form the basis for selection and development of improved
methods?
Correct Answer Critical examination
Your Answer Critical examination

Multiple Choice Single Answer


Question Which of the following policies is advisable in case of low product variety and
large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines

Multiple Choice Single Answer


Question Which kind of inspection is followed in case of product layout?
Correct Answer Pilot inspection
Your Answer Pilot inspection
Match The Following
Question Correct Answer Your Answer

Emerson Efficiency Plan Wage Payment Wage Payment

Craft Facilities Planning Facilities Planning

Work Sampling Machine utilization Sampling Inspection

Gantt Chart Production Scheduling Production Scheduling

uestion What do you mean by the project duration for which the total
cost is minimum?
Correct Answer Optimum duration
Your Answer Optimum duration

Multiple Choice Multiple Answer


Question Lack of material planning results in the following
Correct Answer Over ordering , under ordering , stockouts
Your Answer under ordering , stockouts , Over ordering

Multiple Choice Single Answer


Question Which kind of defect can be called as minor defect?
Correct Answer Which does not reduce the usability of the product
for its intended use
Your Answer Which does not reduce the usability of the product for its
intended use

Multiple Choice Single Answer


Question What does CPA stand for?
Correct Answer Critical Path Analysis
Your Answer Critical Project Analysis

True/False
Question Grouping of machines gives a lot of flexibility in loading
and scheduling
Correct Answer True
Your Answer True

True/False
Question Fixed cost is lower in case of continuous production than
intermittent production.
Correct Answer False
Your Answer False

Select The Blank


Question Function concerned with fixation of time allowed to
qualified worker for a job is called ________.
Correct Answer Work Measurement
Your Answer Time Measurement

Select The Blank


Question The design of any layout is governed by large number of
factors and the best layout is expected to ________ all these factors.
Correct Answer Optimise
Your Answer Consider

Multiple Choice Multiple Answer


Question Which of the following is not the characteristic of Project
Production?
Correct Answer Continuous flow of material , Highly mechanised
material handling , Virtually zero manufacturing cycle time
Your Answer Continuous flow of material , Highly mechanised material
handling , Virtually zero manufacturing cycle time

Multiple Choice Single Answer


Question The process of changing inputs into outputs thereby adding
some value to entity can be defined as
Correct Answer Operation
Your Answer Operation

Multiple Choice Multiple Answer


Question Which of the following cases can be treated as delay during
recording of method study?
Correct Answer Operators awaiting instructions from supervisor ,
Worker waiting for his turn at tools stores , Jobs awaiting at the machines
for their turn
Your Answer Operators awaiting instructions from supervisor , Worker
waiting for his turn at tools stores , Jobs awaiting at the machines for
their turn

True/False
Question Root cause of most of the breakdowns is failure of the
lubrication system.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


Question Which of the following are steps to identify the critical
path in a small network?
Correct Answer Compare the durations of all paths to identify the
longest path. , Sum up the durations of activities along each path. ,
Enumerate all paths in the network and list down activities on each path.
Your Answer Compare the durations of all paths to identify the longest
path. , Sum up the durations of activities along each path. , Enumerate all
paths in the network and list down activities on each path.
Match The Following
Question Correct Answer Your Answer

Emerson Efficiency Plan Wage Payment Wage Payment

Craft Facilities Planning Facilities Planning

Work Sampling Machine utilization Machine utilization

Gantt Chart Production Scheduling Production Scheduling

Multiple Choice Multiple Answer


Question What are the benefits of overhauling?
Correct Answer It increases useful life of an equipment and it's
parts , Advance planning allows to attend equipment without disturbing the
production programme , Advance planning allows to prepare and keep ready the
list of replacement spares
Your Answer It increases useful life of an equipment and it's parts ,
Advance planning allows to attend equipment without disturbing the
production programme , Advance planning allows to prepare and keep ready the
list of replacement spares

True/False
Question The event numbers as far as possible reflect the logical
relationships of the activities.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Technique of Value Engineering can be effectively employed
in design of a product to
Correct Answer To meet the intended function at lowest cost
Your Answer To meet the intended function at lowest cost

True/False
Question Proper care and storage is not an essential part of a well
planned lubrication system.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Question A good plant layout helps in
Correct Answer Reducing handling costs
Your Answer Reducing handling costs

Multiple Choice Multiple Answer


Question Scale model used for layout analysis have following
advantages
Correct Answer Nontechnical person finds it easy to comprehend ,
Ovehead facilities can be shown , Models can be shifted easily
Your Answer Nontechnical person finds it easy to comprehend , Ovehead
facilities can be shown , Models can be shifted easily

Multiple Choice Single Answer


Question The ratio of output to input of a production system is
commonly known as
Correct Answer Productivity
Your Answer Productivity

Multiple Choice Multiple Answer


Question Which of the following products should be produced by using
mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer Refrigerator , Tyre for automobile , Television Set

True/False
Question Theoretical capacity equals number of normal working hours
of that machine.
Correct Answer True
Your Answer True

True/False
Question It is not necessary to know spare time available on the
non-critical path to allow a little delay for noncritical activity.
Correct Answer False
Your Answer False

Select The Blank


Question Production Planning is a centralised activity which includes
functions such as ________
Correct Answer Scheduling
Your Answer Scheduling

True/False
Question In case of X bar-R charts,it is ensured that the assignable
causes are detected before the tolerances are violated, upper and lower
statistical limits are worked out and inserted into a chart.
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is the process of assigning calender dates to
the various operations of a job.
Correct Answer Scheduling
Your Answer Scheduling

Select The Blank


Question An Ideal OC curve is ________ shaped curve that accpets all
the lots with quality equal to or better than AQL .
Correct Answer Rectangular
Your Answer Rectangular

Multiple Choice Single Answer


Question Any premise in which persons are employed for purpose of
making any product/s is called
Correct Answer Factory
Your Answer Factory

Multiple Choice Multiple Answer


Question Which of the following cases indicates change in physical
characteristic?
Correct Answer Turning , Grinding , Drilling
Your Answer Turning , Grinding , Drilling

Match The Following


Question Correct Answer Your Answer

Combined Layout Mixed Layout Mixed Layout

Fixed Position Layout Project Layout Project Layout

Product Layout Line Layout Line Layout

Process Layout Functional Layout Functional Layout

Select The Blank


Question Two welknown timing methods are cumulative method and
________.
Correct Answer Fly back method
Your Answer Continuous method

Multiple Choice Single Answer


Question How many types of charts are used for the purpose of method
study?
Correct Answer Four
Your Answer Eight

True/False
Question Sampling inspection suffice to check the work of line
inspectors and stage inspectors.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question Where the ignorance towards the degradation of machine leads
to?
Correct Answer Eventual breakdown
Your Answer Eventual breakdown

Multiple Choice Single Answer


Question One of the sophisticated operations research techniques used
in material planning is
Correct Answer Dynamic programming
Your Answer Dynamic programming

Multiple Choice Single Answer


Question Which of the following policies is advisable in case of low
product variety and large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines

True/False
Question It pays in the long run to inform the customer regarding
expected delays in the deliveries.
Correct Answer True
Your Answer True

Select The Blank


Question The ________ is a set of tools and techniques by which
products are made to comply with the specifications at minimum cost to the
firm.
Correct Answer Quality control system
Your Answer Quality control system

Select The Blank


Question A ________ is another typical chart which is used to record
frequency of movements between work centers.
Correct Answer Travel chart
Your Answer Frequency chart

True/False
Question Cent percent inspection does not mean inspection of
component for 100% quality characteristics.
Correct Answer True
Your Answer False

Multiple Choice Multiple Answer


Question Route Sheet generally contains following information
Correct Answer Material Specification , Sequence of operation ,
Skill of Labour
Your Answer Material Specification , Sequence of operation , Skill of
Labour

Select The Blank


Question Any incentive scheme must achieve the ________ of the
organisation.
Correct Answer Objectives
Your Answer Tax goals

Multiple Choice Single Answer


Question Document raised by Sales department for goods manufactured
to stock is called
Correct Answer Shipment order
Your Answer Stock order

Multiple Choice Single Answer


Question What do you understand by the timeframe for the maintenance
needs of the equipment?
Correct Answer Maintenance inspection schedule
Your Answer Maintenance inspection schedule

True/False
Question Three time estimates are transformed into expected time
before using it into a network.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Question What do you mean by planned corrective manitenance which
provides an opportunity to undertake design modifications in the equipment
to eliminate or reduce frequency of breakdowns.
Correct Answer Design-out Maintenance
Your Answer Design-in Maintenance

Question: Which of the following aspects are essential to ensure quality of


purchased items?
Answer: Defining right quality for the job , Vendor performance
evaluation , Making sure that suppliers understand the requirements

Select The Blank


Question: The ________ breakdowns usually cost more, partly due to
damage done to the adjustment components and partly due to emergency
actions.
Answer: Unexpected

True/False
Question: After goods have been manufactured, route sheets and
operation layouts should not be collected back.
Answer: False

True/False
Question: In case of centralized inspection, inspection rooms generally
become bottleneck and cause delay in taking action regarding rejection or
rework.
Answer: True

Multiple Choice Single Answer


Question: MRP is based on the concept of inventory demand which is of
following type
Answer: Dependent and independent

Multiple Choice Single Answer


Question: Any premise in which persons are employed for purpose of
making any product/s is called
Answer: Factory

Multiple Choice Multiple Answer


Question: Components of Production Management include
Answer: Capacity Planning, Job Design, Production Planning

Multiple Choice Single Answer


Question: Which of the following is the criteria for the percentage
defectives in the zone of the indecision?
Answer: Lots having the percentage defective more than AQL but less
than LPTD

Multiple Choice Multiple Answer


Question: Which of the following are examples of addition during
recording for method study?
Answer: Brazing, Welding, Riveting

Select the Blank


Question: The easiest way to bring the delayed job within the promised
delivery time by using extra shift or weekly holiday is ________.
Answer: Overtime working

Select The Blank


Question: An Ideal OC curve is ________ shaped curve that accpets all
the lots with quality equal to or better than AQL .
Answer: Rectangular

Multiple Choice Multiple Answer


Question: Which of the following causes can be responsible for derailing
the production schedule in a factory?
Answer: Errors in drawings, Delay in receipt of material from vendor,
Excessive absenteeism

Multiple Choice Multiple Answer


Question: Which of the following situations demand the economic
consideration while selecting a job for method study?
Answer: Unorderly movement of men and materials, Excessive process
defectives, Too many suggestions received for improvement from a
department or section

True/False
Question: During set up of X bar-R control chart, control limits should be
practically revised from time to time as additional data is accumulated.
Answer: True

Multiple Choice Multiple Answer


Question: Which of the following are the basic requirements of quality
standard?
Answer: Definite, Understandable, Economically viable

Match the Following


Question Correct Answer
Toung Sweet
Eye Crack
Nose Burnout
Ear Impact

Select the Blank


Question: The ________ is the defect level for which lots are regarded as
bad lots.
Answer: Lot Tolerance Percentage Defective

True/False
Question: Floor inspection delays the identification of faults which can not
be rectified immediately before large lots are spoiled.
Answer: False

True/False
Question: Cent percent inspection is required on WIP prior to the key,
critical or costly operation.
Answer: True

Multiple Choice Single Answer


Question: The document which incorporates details of process planning
for a job is called
Answer: Route Sheet

True/False
Question: Repetitive movements between work stations which are difficult
to be traced on string diagrams can be conveniently shown on flow
diagrams.
Answer: False

Choice Single Answer


Question: Which of the following is the most popular technique for Project
Production?
Answer: PERT & CPM

Multiple Choice Single Answer


Question: Technique of Value Engineering can be effectively employed in
design of a product to
Answer: To meet the intended function at lowest cost

Multiple Choice Single Answer


Question: What can be the worst effect due to excessive vibration?
Answer: Breakdown

Multiple Choice Single Answer


Question: What is the relation between duration of an activity and length
of an arrow?
Answer: No relation

Multiple Choice Single Answer


Question: What is the nature of the sampling plan for critical defects?
Answer: Tight

Select the Blank


Question: The ________ is the maintenance work initiated on a result of
knowledge of the condition of an item from routine or continuous
checking.
Answer: Condition monitoring

Multiple Choice Multiple Answer


Question: Which of the following are important considerations concerning
activity times?
Answer: Activity time should be obtained from the person responsible for
the completion of an activity, Activity time must be independent of any
influence which the preceding or succeeding activity may have on it. ,
Activity time may assume that just the normal quantity of resources
required to carry out the activity are available.

Multiple Choice Single Answer


Question: Which of the following techniques is used by industrial
engineering department to obtain the utilization index?
Answer: Work Sampling Studies

Multiple Choice Multiple Answer


Question: Which of the following factors play important role while
selecting or rejecting a particular site from legislation and taxation point
of view?
Answer: Labour laws, Building codes, Policies regarding issue of licenses

Multiple Choice Multiple Answer


Question: Which of the following cases can be referred as operation in
method study recording?
Answer: Change in physical characteristic, Consumption of physical effort,
Change in chemical characteristic

True/False
Question: An activity can share the same tail event and same head event
with any other activity.
Answer: False

Select the Blank


Question: The ________ must ensure that the products satisfy the
functional requirements of its usage.
Answer: Quality of design

Multiple Choice Multiple Answer


Question: Which of the following are examples of pure materials?
Answer: Bakeries, Ice factories, Woolen

Select the Blank


Question: The ________ are the definitions of the measurable as well as
non measurable characteristics of the product.
Answer: Specifications

Multiple Choice Single Answer


Question: Site factors for plant location include
Answer: Suitability of land

Select the Blank


Question: The ________ is the probability that a good lot will be rejected
by the sampling plan.
Answer: Producer's risk

After goods have been manufactured, route sheets and operation layouts should not be
collected back.
Correct Answer
False

True/False
Question
In case of centralised inspection, inspection rooms generally become bottleneck and
cause delay in taking action regarding rejection or rework.
Correct Answer
True

Multiple Choice Single Answer


Question
MRP is based on the concept of inventory demand which is of following type
Correct Answer
Dependent and independent

Multiple Choice Single Answer


Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer
Factory

Multiple Choice Multiple Answer


Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning

Multiple Choice Single Answer


Question
Which of the following is the criteria for the percentage defectives in the zone of the
indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD

Multiple Choice Multiple Answer


Question
Which of the following are examples of addition during recording for method study?
Correct Answer
Brazing , Welding , Riveting

Select The Blank


Question
The easiest way to bring the delayed job within the promised delivery time by using extra
shift or weekly holiday is ________.
Correct Answer
Overtime working

Select The Blank


Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer
Rectangular

Multiple Choice Multiple Answer


Question
Which of the following causes can be responsible for derailing the production schedule
in a factory?
Correct Answer
Errors in drawings , Delay in receipt of material from vendor , Excessive absenteeism

Multiple Choice Multiple Answer


Question
Which of the following situations demand the economic consideration while selecting a
job for method study?
Correct Answer
Unorderly movement of men and materials , Excessive process defectives , Too many
suggestions received for improvement from a department or section

True/False
Question
During set up of X bar-R control chart, control limts should be practically revised from
time to time as additional data is accumulated.
Correct Answer
True

Multiple Choice Multiple Answer


Question
Which of the following are the basic requirements of quality standard?
Correct Answer
Deifinite , Undesrstandable , Economically viable

Match The Following


Question
Correct Answer

1.Toung
Sweet
2.Eye
Crack
3.Nose
Burnout
4.Ear
Impact

Select The Blank


Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer
Lot Tolerance Percentage Defective

True/False
Question
Floor inspection delays the identification of faults which can not be rectified immediately
before large lots are spoiled.
Correct Answer
False

True/False
Question
Cent percent inspection is required on WIP prior to the key, critical or costly operation.
Correct Answer
True

Multiple Choice Single Answer


Question
The document which incorporates details of process planning for a job is called
Correct Answer
Route Sheet

True/False
Question
Repetitive movements between work stations which are difficult to be traced on string
diagrams can be conveniently shown on flow diagrams.
Correct Answer
False

Multiple Choice Single Answer


Question
Which of the following is the most popular technique for Project Production?
Correct Answer
PERT & CPM

Multiple Choice Single Answer


Question
Technique of Value Engineering can be effectively employed in design of a product to
Correct Answer
To meet the intended function at lowest cost

Multiple Choice Single Answer


Question
What can be the worst effect due to excessive vibration?
Correct Answer
Breakdown

Multiple Choice Single Answer


Question
What is the relation between duration of an activity and length of an arrow?
Correct Answer
No relation

Multiple Choice Single Answer


Question
What is the nature of the sampling plan for critical defects?
Correct Answer
Tight

Select The Blank


Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring

Multiple Choice Multiple Answer


Question
Which of the following are important considerations concerning activity times?
Correct Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.

Multiple Choice Single Answer


Question
Which of the following techniques is used by industrial engineering department to obtain
the utilisation index?
Correct Answer
Work Sampling Studies

Multiple Choice Multiple Answer


Question
Which of the following factors play important role while selecting or rejecting a particular
site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences

Multiple Choice Multiple Answer


Question
Which of the following cases can be referred as operation in method study recording?
Correct Answer
Change in physical characteristic , Consumption of physical effort , Change in chemical
characteristic

True/False
Question
An activity can share the same tail event and same head event with any other activity.
Correct Answer
False

Select The Blank


Question
The ________ must ensure that the product satisfy the functional requirements of it’s
usage.
Correct Answer
Quality of design

Multiple Choice Multiple Answer


Question
Which of the following are examples of pure materials?
Correct Answer
Bakeries , Ice factories , Woolen

Select The Blank


Question
The ________ are the definitions of the measurable as well as nonmeasurable
characteristics of the product.
Correct Answer
Specifications

Multiple Choice Single Answer


Question
Site factors for plant location include

Select The Blank


Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer’s risk

Multiple Choice Multiple Answer


Question
Which of the following defects can be observed during preventive inspection by using
human senses?
Correct Answer
Deviation from normal sound , Excessive Vibration , Leakage of a gas

Select The Blank


Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer
Shutdown Maintenance

True/False
Question
Independent float either affects the float of preceding activities or that of succeeding
activities.
Correct Answer
False

Multiple Choice Multiple Answer


Question
Lack of material planning results in the following
Correct Answer
Over ordering , under ordering , stockouts

True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False

Select The Blank


Question
Work study is also called ________ study
Correct Answer
Time and Motion

Match The Following


Question
Correct Answer

1.Factor Analysis
Method to evaluate layouts
2.Minimization of production delays
Objective of good layout
3.Maximum visibility
Principles of good layout
4.Scale model
Layout analysis

Multiple Choice Single Answer


Question
Following is one of the techniques used for Material Planning for high value material
Correct Answer
MRP

Multiple Choice Single Answer


Question
What do you understand by totality of features and characteristics of a product or service
that bears on it’s ability to satisfy the customer?
Correct Answer
Quality

Select The Blank


Question
One detachable ticket is prepared for each ________.
Correct Answer
Operation

Vous aimerez peut-être aussi