Académique Documents
Professionnel Documents
Culture Documents
com
DESIGN SCOPE
We need to achieve connectivity between PC1 user in Our Organization and paygmy server in 3rd Party network .
Traffic should be through Link 1 and in case Link 1 goes down it should failover to Link 2 .
If Link1 and Link2 both goes down then the traffic should move through Link3.
(Incase any link link1 or link2 comes the traffic should move through that link)
Incase all the 3 goes down traffic should move through Link4.
1
(Incase any link link1 or link2 comes the traffic should move through that link)
CONFIGURATION
R1
(Config)#
interface FastEthernet0
description LAN
no shut
interface Serial0
description Link1
no shut
interface Serial1
description Link2
no shut
R2
interface FastEthernet0
description LAN
no shut
interface Serial0
description Link3
no shut
interface Serial1
description Link4
no shut
2
!
R3
description PROD-APP-SERVER
interface FastEthernet0
description LAN
no shut
interface Serial0
description Link1
no shut
interface Serial1
description Link2
no shut
R4
description UAT_APP_SERVER
interface FastEthernet0
description LAN
no shut
interface Serial0
description Link3
no shut
interface Serial1
description Link4
no shut
3
!
R1
ip route 3.3.3.3 255.255.255.255 13.1.1.2 50 name PROD_APP_PRIMARY_PATH Can ignore at this moment
ip route 3.3.3.3 255.255.255.255 13.2.1.2 60 name PROD_APP_SEC_PATH Can ignore at this moment
R2
ip route 4.4.4.4 255.255.255.255 24.1.1.2 50 name UAT_APP_SERVER Can ignore at this moment
ip route 4.4.4.4 255.255.255.255 24.2.1.2 60 name UAT_APP_SERVER Can ignore at this moment
R3
R4
R1
standby 10 priority 115 Making the priority higher than R2’s HSRP INTERFACE so that R1 should Active.
R2
R3
interface FastEthernet0
standby 5 ip 5.5.5.1
standby 5 preempt
R4
4
interface FastEthernet0
standby 5 ip 5.5.5.1
standby 5 preempt
R1
(Config)#
ip sla monitor 1
frequency 5
ip sla monitor 2
interface FastEthernet0
Failover Testing
Pre-Checks
Currently able to ping paygm server 5.5.5.5 on port 10019 from PCI
LINK 1
5
Failover Testing
R1 TRACK 100 -DOWN TRACK 200 –UP track100 is down since Link1 is gone down
LINK 2
6
Step 2- Unshut Link 1
R1 HSRP – PRIORITY 115-ACTIVE the priority got increased by10 since the Link1 is up now
R1 TRACK 100 UP TRACK 200 UP Track 100 is up now since link 1 is up now
7
LINK 1 & 2 down
NOT ABLE TO
PING???
ip sla monitor 1
frequency 5
8
ip sla monitor 2
frequency 5
interface FastEthernet0
description LAN
speed auto
standby 5 ip 5.5.5.1
standby 5 preempt
standby 5 track 100 decrement 4 Configuring decrement of 4 in the priority once the track 100 is down
standby 5 track 200 decrement 4 Configuring decrement of 4 in the priority once the track 200 is down
R4 NOW BECOME
ACTIVE
LINK 3
9
R1 HSRP – PRIORITY 95-STANDBY
LINK 4
but still the traffic is moving through link4 and not link2 since R2 is still active
10
TRACK 200 IS UP
LINK2
11