Académique Documents
Professionnel Documents
Culture Documents
1 rev1
Submittal
Model: HSC-5x4x17F-72 hp
Series: HSC, Diesel Engine
Project Number: 637800.1.1 Representative: SAA
Name: Plasticos Rival S. A. Armstrong Limited
Reference: 637800.1 rev1 23 Bertrand Avenue
Location: Peru Toronto, Ontario
Engineer: Canada, M1L 2P3
Contractor: Phone: , Fax:
Order No: Date: 12/31/2017
Submitted by: Gianluca (INT) Date: 11/21/2017
Approved by: Date:
PROJECT DETAILS
Tag Num : Qty : 1
Service : Location :
ACCESSORIES
Exhaust system (Silencer and Flexible connection)
Fuel system (Fuel Tank with flame arrestor and fittings)
(Tank sized for 1Gal. per HP + 10% extra for sump and expansion per NFPA20)
FM Approved Cooling Loop installed on engine per NFPA20
Battery system (cables, rack and batteries)
Diesel Fuel Tank
The submittal drawings for Tornatech controller model # GPD-12-220 can be found on their web page, see
the link below:
http://www.tornatech.com/contenu/index.cfm
Materials of construction
Construction: SS Pump casing: AISI 304 SS
Rating: 300 lb Pump shaft: AISI 304 SS
Connections: Inlet: 1.25 in, Outlet: 1.25 in
Weight: 32 lb
• Not to scale
• Units of measure : inches [millimeters]
• Tolerance of ± 0.125 inch (± 3 mm) should be used
• For certified dimensions, please contact your Armstrong representative
• Pump equipped with casing drain plug and ¼ inch NPT suction and discharge gauge ports
Special instructions
Selected options
Flange-Cast Iron 1 1/4" Flange 250lb
The submittal drawings for Tornatech controller model # JP3-480/2/3/60 can be found on their web
page, see the link below:
http://www.tornatech.com/contenu/index.cfm