Académique Documents
Professionnel Documents
Culture Documents
Simplified Schematic
IN+
OUT
IN−
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017 www.ti.com
Table of Contents
1 Features .................................................................. 1 7.1 Overview ................................................................. 10
2 Applications ........................................................... 1 7.2 Functional Block Diagram ....................................... 10
3 Description ............................................................. 1 7.3 Feature Description................................................. 10
7.4 Device Functional Modes........................................ 10
4 Revision History..................................................... 2
5 Pin Configuration and Functions ......................... 3 8 Application and Implementation ........................ 11
8.1 Application Information............................................ 11
6 Specifications......................................................... 4
8.2 Typical Application ................................................. 11
6.1 Absolute Maximum Ratings ...................................... 4
6.2 ESD Ratings.............................................................. 4 9 Power Supply Recommendations...................... 14
6.3 Recommended Operating Conditions....................... 4 10 Layout................................................................... 14
6.4 Thermal Information LM293, LM393, LM2903 (all 10.1 Layout Guidelines ................................................. 14
suffixes)...................................................................... 5 10.2 Layout Example .................................................... 14
6.5 Thermal Information LM193 ...................................... 5 11 Device and Documentation Support ................. 15
6.6 Electrical Characteristics for LM193, LM293, and 11.1 Related Links ........................................................ 15
LM393 (without A suffix) ............................................ 6 11.2 Receiving Notification of Documentation Updates 15
6.7 Electrical Characteristics for LM293A and LM393A . 7 11.3 Community Resources.......................................... 15
6.8 Electrical Characteristics for LM2903, LM2903V, and 11.4 Trademarks ........................................................... 15
LM2903AV ................................................................. 8
11.5 Electrostatic Discharge Caution ............................ 15
6.9 Switching Characteristics (all devices)...................... 8
11.6 Glossary ................................................................ 15
6.10 Typical Characteristics ............................................ 9
12 Mechanical, Packaging, and Orderable
7 Detailed Description ............................................ 10 Information ........................................................... 15
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
• Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation
section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and
Mechanical, Packaging, and Orderable Information section. ................................................................................................ 1
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
1OUT
1OUT 1 8 VCC
VCC
NC
NC
NC
1IN− 2 7 2OUT
1IN+ 3 6 2IN−
GND 4 5 2IN+ 3 2 1 20 19
NC 4 18 NC
1IN− 5 17 2OUT
NC 6 16 NC
1IN+ 7 15 2IN−
NC 8 14 NC
9 10 11 12 13
GND
2IN+
NC
NC
NC
NC – No internal connection
Pin Functions
PIN
SOIC, VSSOP, I/O DESCRIPTION
NAME CDIP, PDIP, SO, LCCC
and TSSOP
1OUT 1 2 Output Output pin of comparator 1
1IN– 2 5 Input Negative input pin of comparator 1
1IN+ 3 7 Input Positive input pin of comparator 1
GND 4 10 — Ground
2IN+ 5 12 Input Positive input pin of comparator 2
2IN- 6 15 Input Negative input pin of comparator 2
2OUT 7 17 Output Output pin of comparator 2
VCC 8 20 — Supply Pin
1
3
4
6
8
9
NC — N/A No Connect (No Internal Connection)
11
13
14
16
18
19
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
MIN MAX UNIT
VCC Supply voltage (2) 36 V
(3)
VID Differential input voltage ±36 V
VI Input voltage (either input) –0.3 36 V
IIK Input current (4) -50 mA
VO Output voltage 36 V
IO Output current 20 mA
Duration of output short circuit to ground (5) Unlimited
TJ Operating virtual-junction temperature 150 °C
Case temperature for 60 s FK package 260 °C
Lead temperature 1.6 mm (1/16 in) from case for 60 s JG package 300 °C
Tstg Storage temperature –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Input current flows thorough parasitic diode to ground and will turn on parasitic transistors that will increase ICC and may cause output
to be incorrect. Normal operation resumes when input current is removed.
(5) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
6.6 Electrical Characteristics for LM193, LM293, and LM393 (without A suffix)
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM293
LM193
PARAMETER TEST CONDITIONS TA (1) LM393 UNIT
MIN TYP MAX MIN TYP MAX
VCC = 5 V to 30 V, 25°C 2 5 2 5
VIO Input offset voltage VIC = VICR min, mV
VO = 1.4 V Full range 9 9
25°C 3 25 5 50
IIO Input offset current VO = 1.4 V nA
Full range 100 250
25°C –25 –100 –25 –250
IIB Input bias current VO = 1.4 V nA
Full range –300 –400
0 to 0 to
25°C
Common-mode input-voltage VCC – 1.5 VCC – 1.5
VICR V
range (2) 0 to 0 to
Full range
VCC – 2 VCC – 2
VCC = 15 V,
Large-signal differential-voltage
AVD VO = 1.4 V to 11.4 V, 25°C 50 200 50 200 V/mV
amplification
RL ≥ 15 kΩ to VCC
VOH = 5 V VID = 1 V 25°C 0.1 0.1 50 nA
IOH High-level output current
VOH = 30 V VID = 1 V Full range 1 1 µA
25°C 150 400 130 400
VOL Low-level output voltage IOL = 4 mA, VID = –1 V mV
Full range 700 700
IOL Low-level output current VOL = 1.5 V, VID = –1 V 25°C 6 6 mA
VCC = 5 V 25°C 0.8 1 0.45 1
ICC Supply current RL = ∞ mA
VCC = 30 V Full range 2.5 0.55 2.5
(1) Full range (minimum or maximum) for LM193 is –55°C to 125°C, for LM293 is –25°C to 85°C, and for LM393 is 0°C to 70°C. All
characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) The voltage at either input should not be allowed to go negative by more than 0.3 V otherwise output may be incorrect and excessive
input current can flow. The upper end of the common-mode voltage range is limited by VCC – 2V. However only one input needs to be in
the valid common mode range, the other input can go up the maximum VCC level and the comparator provides a proper output state.
Either or both inputs can go to maximum VCC level without damage.
(1) Full range (minimum or maximum) for LM293A is –25°C to 85°C, and for LM393A is 0°C to 70°C. All characteristics are measured with
zero common-mode input voltage, unless otherwise specified.
(2) The voltage at either input should not be allowed to go negative by more than 0.3 V otherwise output may be incorrect and excessive
input current can flow. The upper end of the common-mode voltage range is limited by VCC – 2V. However only one input needs to be in
the valid common mode range, the other input can go up the maximum VCC level and the comparator provides a proper output state.
Either or both inputs can go to maximum VCC level without damage.
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
25°C 5 50 5 50
IIO Input offset current VO = 1.4 V nA
Full range 200 200
25°C –25 –250 –25 –250
IIB Input bias current VO = 1.4 V nA
Full range –500 –500
0 to 0 to
25°C
Common-mode input- VCC – 1.5 VCC – 1.5
VICR V
voltage range (3) 0 to 0 to
Full range
VCC – 2 VCC – 2
Large-signal differential- VCC = 15 V, VO = 1.4 V to 11.4 V,
AVD 25°C 25 100 25 100 V/mV
voltage amplification RL ≥ 15 kΩ to VCC
VOH = 5 V, VID = 1 V 25°C 0.1 50 0.1 50 nA
IOH High-level output current (2)
VOH = VCC MAX , VID = 1 V Full range 1 1 µA
25°C 150 400 150 400
VOL Low-level output voltage IOL = 4 mA, VID = –1 V, mV
Full range 700 700
IOL Low-level output current VOL = 1.5 V, VID = –1 V 25°C 6 6 mA
VCC = 5 V 25°C 0.8 1 0.8 1
ICC Supply current RL = ∞ mA
VCC = MAX Full range 2.5 2.5
(1) Full range (minimum or maximum) for LM2903 is –40°C to 125°C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
(2) VCC MAX = 30 V for non-V devices and 32 V for V-suffix devices.
(3) The voltage at either input should not be allowed to go negative by more than 0.3 V otherwise output may be incorrect and excessive
input current can flow. The upper end of the common-mode voltage range is limited by VCC – 2V. However only one input needs to be in
the valid common mode range, the other input can go up the maximum VCC level and the comparator provides a proper output state.
Either or both inputs can go to maximum VCC level without damage.
RL connected to 5 V through 5.1 kΩ, 100-mV input step with 5-mV overdrive 1.3
Response time µs
CL = 15 pF (1) (2) TTL-level input step 0.3
1.8 80
1.6 70
TA = –55°C
TA = –55°C
1.4
TA = 0°C
1.2 TA = 0°C
50
1 TA = 25°C
TA = 70°C
40
0.8 TA = 70°C
TA = 125°C
30
0.6 TA = 125°C
20
0.4
0.2 10
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
VCC – Supply Voltage – V VCC – Supply Voltage – V
Figure 1. Supply Current vs Supply Voltage Figure 2. Input Bias Current vs Supply Voltage
10 6
5
Overdrive = 5 mV
VO – Saturation Voltage – V
1
VO – Output Voltage – V
4
TA = 125°C
Overdrive = 20 mV
TA = 25°C 3
0.1 Overdrive = 100 mV
TA = –55°C 2
1
0.01
0.001 -1
0.01 0.1 1 10 100 -0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
IO – Output Sink Current – mA t – Time – µs
Figure 3. Output Saturation Voltage Figure 4. Response Time for Various Overdrives
Negative Transition
Overdrive = 5 mV
VO – Output Voltage – V
Overdrive = 20 mV
3
Overdrive = 100 mV
2
-1
-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
t – Time – µs
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
7 Detailed Description
7.1 Overview
These dual comparators have the ability to operate up to absolute maximum of 36 V on the supply pin. This
device has proven ubiquity and versatility across a wide range of applications. This is due to very wide supply
voltages range (2 V to 36 V), low Iq and fast response of the devices.
The open-drain output allows the user to configure the output's logic high voltage (VOH) and can be used to
enable the comparator to be used in AND functionality.
VCC
80-µA
Current Regulator
10 µA 60 µA 10 µA 80 µA
COMPONENT COUNT
Epi-FET 1
Diodes 2
IN+ Resistors 2
OUT Transistors 30
IN−
GND
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
6 6
5 5
Output Voltage, Vo(V)
3 3
2 5mV OD 2
5mV OD
1 20mV OD 1
20mV OD
0 0
100mV OD 100mV OD
±1 ±1
-0.25 0.25 0.75 1.25 1.75 2.25 ±0.25 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
Time (usec) C004 Time (usec) C006
Figure 8. Response Time for Various Overdrives Figure 9. Response Time for Various Overdrives
(Positive Transition) (Negative Transition)
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
LM193, LM293, LM293A, LM393, LM393A, LM2903, LM2903V
www.ti.com SLCS005Z – OCTOBER 1979 – REVISED OCTOBER 2017
10 Layout
Better Ground
PF
1 1OUT VCC 8 VCC
Input Resistors
Close to device
2 1IN- 2OUT 7 OK
VCC or GND
3 1IN+ 2IN- 6
Ground 4 GND 2IN+ 5
11.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
11.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
11.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
Product Folder Links: LM193 LM293 LM293A LM393 LM393A LM2903 LM2903V
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM193DR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM193
& no Sb/Br)
LM193DRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM193
& no Sb/Br)
LM2903AVQDR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903AV
& no Sb/Br)
LM2903AVQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903AV
& no Sb/Br)
LM2903AVQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903AV
& no Sb/Br)
LM2903AVQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903AV
& no Sb/Br)
LM2903D ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM -40 to 125 (MAP, MAS, MAU)
& no Sb/Br) CU NIPDAUAG
LM2903DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-1-260C-UNLIM -40 to 125 (MAP, MAS, MAU)
& no Sb/Br)
LM2903DR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DRE4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DRG3 ACTIVE SOIC D 8 2500 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903DRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2903
& no Sb/Br)
LM2903P ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 125 LM2903P
(RoHS)
LM2903PE4 ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 125 LM2903P
(RoHS)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM2903PSR ACTIVE SO PS 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903PSRG4 ACTIVE SO PS 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903PWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903PWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903PWRG3 ACTIVE TSSOP PW 8 2000 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903
& no Sb/Br)
LM2903QD ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 2903Q
& no Sb/Br)
LM2903QDG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 2903Q
& no Sb/Br)
LM2903QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 2903Q
& no Sb/Br)
LM2903VQDR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903V
& no Sb/Br)
LM2903VQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903V
& no Sb/Br)
LM2903VQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903V
& no Sb/Br)
LM2903VQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2903V
& no Sb/Br)
LM293AD ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293A
& no Sb/Br)
LM293ADE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293A
& no Sb/Br)
LM293ADG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293A
& no Sb/Br)
LM293ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM -25 to 85 (MDP, MDS, MDU)
& no Sb/Br) CU NIPDAUAG
LM293ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-1-260C-UNLIM -25 to 85 (MDP, MDS, MDU)
& no Sb/Br)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM293ADR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM293A
& no Sb/Br)
LM293ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293A
& no Sb/Br)
LM293D ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM -25 to 85 (MCP, MCS, MCU)
& no Sb/Br) CU NIPDAUAG
LM293DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-1-260C-UNLIM -25 to 85 (MCP, MCS, MCU)
& no Sb/Br)
LM293DR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DRE4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DRG3 ACTIVE SOIC D 8 2500 Green (RoHS CU SN Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293DRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM293
& no Sb/Br)
LM293P ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU | CU SN N / A for Pkg Type -25 to 85 LM293P
(RoHS)
LM293PE4 ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM293P
(RoHS)
LM393AD ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM393A
& no Sb/Br)
LM393ADE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM393A
& no Sb/Br)
LM393ADG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM393A
& no Sb/Br)
LM393ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM 0 to 70 (M8P, M8S, M8U)
& no Sb/Br) CU NIPDAUAG
LM393ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-1-260C-UNLIM 0 to 70 (M8P, M8S, M8U)
& no Sb/Br)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com 12-Aug-2017
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
• Automotive: LM2903-Q1
• Enhanced Product: LM293-EP
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
Addendum-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2017
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2017
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2017
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Oct-2017
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM2903VQPWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM293ADGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM293ADR SOIC D 8 2500 367.0 367.0 35.0
LM293ADR SOIC D 8 2500 340.5 338.1 20.6
LM293ADR SOIC D 8 2500 364.0 364.0 27.0
LM293ADR SOIC D 8 2500 333.2 345.9 28.6
LM293ADRG4 SOIC D 8 2500 367.0 367.0 35.0
LM293ADRG4 SOIC D 8 2500 340.5 338.1 20.6
LM293DGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM293DR SOIC D 8 2500 367.0 367.0 35.0
LM293DR SOIC D 8 2500 364.0 364.0 27.0
LM293DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM293DRG4 SOIC D 8 2500 367.0 367.0 35.0
LM293DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM393ADGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM393ADR SOIC D 8 2500 340.5 338.1 20.6
LM393ADR SOIC D 8 2500 367.0 367.0 35.0
LM393ADR SOIC D 8 2500 364.0 364.0 27.0
LM393ADR SOIC D 8 2500 333.2 345.9 28.6
LM393ADRG4 SOIC D 8 2500 367.0 367.0 35.0
LM393ADRG4 SOIC D 8 2500 340.5 338.1 20.6
LM393APSR SO PS 8 2000 367.0 367.0 38.0
LM393APWR TSSOP PW 8 2000 364.0 364.0 27.0
LM393APWR TSSOP PW 8 2000 367.0 367.0 35.0
LM393APWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM393DGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM393DR SOIC D 8 2500 340.5 338.1 20.6
LM393DR SOIC D 8 2500 367.0 367.0 35.0
LM393DRG3 SOIC D 8 2500 333.2 345.9 28.6
LM393DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM393DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM393DRG4 SOIC D 8 2500 367.0 367.0 35.0
LM393PSR SO PS 8 2000 367.0 367.0 38.0
LM393PWR TSSOP PW 8 2000 364.0 364.0 27.0
LM393PWRG3 TSSOP PW 8 2000 364.0 364.0 27.0
LM393PWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
Pack Materials-Page 4
PACKAGE OUTLINE
PW0008A SCALE 2.800
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
C
6.6 SEATING PLANE
TYP
6.2
A PIN 1 ID 0.1 C
AREA
6X 0.65
8
1
3.1 2X
2.9
NOTE 3 1.95
4
5
0.30
8X
0.19
4.5 1.2 MAX
B 0.1 C A B
4.3
NOTE 4
(0.15) TYP
SEE DETAIL A
0.25
GAGE PLANE
0.75 0.15
0 -8 0.05
0.50
DETAIL A
TYPICAL
4221848/A 02/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-153, variation AA.
www.ti.com
EXAMPLE BOARD LAYOUT
PW0008A TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
8X (0.45) SYMM
(R0.05)
1 TYP
8
SYMM
6X (0.65)
5
4
(5.8)
4221848/A 02/2015
NOTES: (continued)
www.ti.com
EXAMPLE STENCIL DESIGN
PW0008A TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
SYMM (R0.05) TYP
8X (0.45)
1
8
SYMM
6X (0.65)
5
4
(5.8)
4221848/A 02/2015
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated