Académique Documents
Professionnel Documents
Culture Documents
AVAILABLE
FMM Institute ~KEDAH / PERLIS BRANCH~ SBL Claimable
Centre for Professional Development (475427-W)
GST NO: 001764515840
INTRODUCTION
A switchgear is also known as an electro-mechanical equipment or device used to close and open circuit. It is
designed and manufactured to operate in various mode of operation, manually, semi-auto or fully automatic suitable to
the required application. This particular course is designed to provide advance knowledge, up to date information and
appropriate guidance as to the right procedures in the operation, maintenance and troubleshooting of switchgears. For
those involve in the operation and maintenance of electrical installation in the industries should be seriously aware the
necessity of obtaining extensive knowledge in the operation, maintenance and troubleshooting of switchgears.
OBJECTIVES
Our main target objectives are to ensure participants will be:
Able to gain extra knowledge on the operation, maintenance and troubleshooting of switchgears.
Able to perform the right approach on the operation, maintenance and troubleshooting.
Able to reduce downtime due to failures of switchgears.
METHODOLOGY
Theoretical type of course
Course notes shall be written in English/Bahasa Malaysia
Presentation will be conducted in dual languages English/Bahasa Malaysia
Questions and Answers session.
CONTENTS
DAY 1 injury.
Identifying hazards on switchgears.
Introduction
Definition of switchgear Operating Procedures
Components of switchgear and their functionalities. Developing operating procedures.
Have the appropriate knowledge of the safety rules.
Type of switchgears Know how to apply the safety document.
Isolator Know their responsibilities to ensure safety and for
Switch Fuse safe working.
Fuse Switch
Molded Case Circuit Breaker (MCCB) DAY 2
Air Break Circuit Breaker (ACB)
Mineral Oil Circuit Breaker (MOCB) Maintenance of switchgear
Vacuum Circuit Breaker (VCB) Definition of maintenance.
Hexafluoride Circuit Breaker (SF6) Purpose of maintenance.
With his vast experience in electrical and mechanical engineering services, he was invited to be a Consultant/Trainer/Lecturer for
several engineering and technical training institutions such as IKRAM, Universiti Sains Islam Malaysia, Putrajaya Corporation,
Institut Teknologi Petroleum Petronas (INSTEP) and Community Colleges, Ministry of Higher Education Malaysia. Tuan Haji Rozali
is a Competent Personnel and has obtained Competency Certifications awarded by Suruhanjaya Tenaga Malaysia as “Supervisor in
Electrical Engineering”, “Chargeman Category B4 - 33KV” and “Wireman Category PW4 with Three-Phase Testing and
_____________________________________________________________________________________
Endorsement”. He is currently appointed as “External Verification Officer (EVO) for Skills Certificate of Malaysia (SKM) by
~ADMINISTRATIVE DETAILS~
Department of Skills Department, Ministry of Human Resource Malaysia.
ADMINISTRATIVE DETAILS:
Attendance is by prior registration only. Registration form must be completed and returned to FMM Institute by 8 June 2015 with correct
payment by cheque made in favour of ‘FMM INSTITUTE” and crossed “Account Payee Only”. Payment by cash is acceptable during the
day of registration. Registration is on first-come-first-served basis.
REGISTRATION FORM
To : FMM Institute (Attn: Meeza / Zai) Fax: 04-4426876
Please register the following participants:
1. Name & Designation : ____________________________________________________________________________
Company : ____________________________________________________________________________________
Address : ____________________________________________________________________________________