Académique Documents
Professionnel Documents
Culture Documents
Pic1
Pic2
CABLE PINOUT:
RSM x DB9 (Female adapter)
6 2
3 3
4 5
Pic4
GILAT MODEM RS232 Cable
Pinout to connect in to the RSM
CABLE PINOUT:
RSM x DB9 (MALE adpater)
6 2
3 3
4 5
Pic5
RSM Configuration for GILAT MODEM
(Port 7) and Carrier Detect (port 8):
Communication Setting:
1. Baud rRate: 9600
2. Bits/Parit: 8-None
3. Stop Bits: 1
4. Handshake: None
Port Mode Parameters:
21. Port Name: CDBOX or GILAT MDM
22. Port Mode: Any-to-Any
23. DTR output: Pulse
26. Hartbeat: Off
- Important Detail:
A) To maintain this interconection UP, the
RSM should be not switch OFF in the power
button. If this heppening we need reconnect
again both ports accessing the RSM.
B) To have GILAT modem access you need
type the command “ /D 7 8 “ (disconnect
both ports 7 and 8) then the technician will
have the access. After the access you need
type the commnad “ /C 7 8 “ to interconnect
GILAT modem to Carrier Detect BOX again.
Gilat MODEM necessary STRINGS after
Pic7 the commissioning:
3) Final test:
Left the modem GILAT locked and the
antenna in the tracking mode pointing to the
right satellite “61w”... then disconect the RX
coaxial cable from the “ RF In “ behind the
GILAT modem.... So check in the front of the
DAC if the antenna will change from tracking
mode to the searcing mode.
Pic9
Pic10
Commonly Gilat Modem RX
Configuration to receive the Petrobras
HUB outbound.