Académique Documents
Professionnel Documents
Culture Documents
Centrifugal Pumps
& Accessories
B-50N
Bell & Gossett Centrifugal Pumps
Bell & Gossett’s complete line of in-line and base-mounted centrifugal
pumps can handle virtually any HVAC and plumbing requirement. The
pumps are engineered for exceptional performance and rugged durability.
They are designed for easy maintenance and to be highly efficient. The
pumps provide reliable operation in a variety of applications, including
hydronic heating and cooling systems, industrial, refrigeration, cooling
towers and irrigation. All B&G pumps are manufactured at an ISO 9001-
approved facility.
The Bell & Gossett name has always stood for uncompromising quality
and dependability. That’s evident in the way every one of our centrifugal
pumps is built and backed by our outstanding customer service and
support teams.
ecocirc® XL
A high efficiency, variable The ecocirc XL is designed utilizing highly
speed, wet rotor pump with efficient ECM motor technology. Couple
an integrated drive that that with multiple built-in operating
is maintenance free. The modes, advanced communication
PREMIUM ecocirc XL is available in capabilities, intelligent controls, a user
EFFICIENCY flange sizes from 3/4” friendly interface and you have a pump
PRODUCT to 3” and motor sizes from
designed for a broad range of HVAC
1/12 to 3 HP. Available in cast iron or and plumbing applications.
lead-free bronze or stainless steel with
flows to 375 GPM and heads to 110 feet. APPLICATIONS:
Operating temperatures ranging from HYDRONIC HEATING AND COOLING
14 – 230ºF. One pump is suitable for SYSTEMS, POTABLE WATER, INDUSTRIAL
either heating or cooling applications. AND GENERAL SERVICE
Series e-60
Maintenance-free, in-line lubricated bearing system, together with
pump available with discharge permanently lubricated motor, make this
sizes from 1” to 3”, and motor pump a worry-free, install-and-forget
sizes from ¼ to 3 HP at 1750 solution. Bell & Gossett’s internally flushed
PREMIUM RPM. Available in bronze-fitted EPDM/Carbon/Silicon Carbide seal makes
EFFICIENCY and all-bronze construction. the Series e-60 a truly worry-free pump.
PRODUCT Flows to 200 GPM and heads
to 55 feet. APPLICATIONS:
HYDRONIC HEATING AND COOLING
The Series e-60 is a close-coupled, in-line SYSTEMS, POTABLE WATER, INDUSTRIAL
pump suitable for horizontal mounting only. AND GENERAL SERVICE
The precision-crafted XL-11® permanently
Series e-90
Close-coupled in-line and horizontal in-line mounting.
mounted pump available Close-coupled design; grease-lubricated
in 1'' through 3'' sizes. 1/4 motor. Bell & Gossett’s internally flushed
HP through 3 HP at 1725 EPDM/Carbon/Silicon Carbide seal makes
PREMIUM RPM and 1 through 5 HP the Series e-90 a truly worry-free pump.
EFFICIENCY at 3450 RPM. Available in
PRODUCT bronze-fitted and all-bronze APPLICATIONS:
construction with flows to 300 GPM, HYDRONIC HEATING AND COOLING
heads to 115 feet. SYSTEMS. GENERAL SERVICE,
REFRIGERATION AND COOLING
The Series e-90 is an excellent TOWERS
all-purpose pump designed for vertical
2
Series e-80
Close-coupled in-line standard. The internal flushed seal
mounted pump available in provides five times the flushing flow of
1-1/2’’ through 8’’ sizes. 1/4 to pumps designed with externally flushed
50 HP at 1750 RPM and 5 to seals. Available in 175#, 250# and 300#
PREMIUM 60 HP at 3500 RPM. Available working pressure. Factory installed
EFFICIENCY variable speed drives for sensored or
PRODUCT in stainless steel fitted
construction. Flows to 2500 sensorless variable flow pumping.
GPM, heads to 380 feet. The Series e-80
APPLICATIONS :
is an efficient, heavy-duty, close-coupled
HYDRONIC HEATING AND COOLING
pump designed for horizontal and vertical
SYSTEMS, GENERAL SERVICE
in-line mounting. Internally flushed Buna/
AND LIGHT INDUSTRIAL PROCESS
Carbon-Ceramic mechanical seals are
Series e-80SC
A split-coupled vertical in-line Designed for space savings and easy
pump available in 1-1/2” servicing, the e-80SC allows mechanical
through 14” discharge sizes. seal maintenance without disturbing the
Motors range from 1 to 300 pump, motor or piping. The wide access
PREMIUM HP at 1750 RPM with flows to motor bracket will accept TC, HP, and
EFFICIENCY 8500 GPM and heads to 202 IEC motors. Factory installed variable
PRODUCT
feet. Available in stainless speed drives for sensored or sensorless
steel fitted construction, with working variable flow pumping.
pressures up to 250 psig.
APPLICATIONS:
Standard features include a unitized EPR/ HYDRONIC HEATING & COOLING
Carbon-Ceramic mechanical seal, ANSI/ SYSTEMS, LIGHT INDUSTRIAL PROCESS,
OSHA compliant guard, stainless steel GENERAL SERVICE, PRESSURE
pump shaft and a shaft jacking coupling BOOSTING
to simplify maintenance.
Series VTP
Multi-stage Vertical Turbine Pumps with coated in the waterways for improved
bronze or stainless steel impellers and efficiencies. Capacities up to 10,000
cast iron bowls. The lineshaft turbine GPM with heads to 150 feet per stage.
pumps have above-ground discharge
APPLICATIONS:
with water-lubricated lineshaft bearings.
COOLING TOWERS, PRESSURE
The column pipe coupling has bronze
BOOSTING AND GENERAL WATER
centering spiders with fluted-rubber
SERVICE
lineshaft bearings. The bowls are vitra-glass
Series e-SV
The Goulds Water 1200 feet. The e-SV design has industry
Technology Series e-SV leading pump efficiencies and a
Vertical Multi-stage Pump design that allows for mechanical seal
distributed, applied, and replacement without removing the
PREMIUM warranted by your local Bell motor to minimize downtime.
EFFICIENCY & Gossett representative.
PRODUCT APPLICATIONS:
Available in eleven models
with motors ranging from 1/2 -75 HP in HYDRONIC HEATING & COOLING,
both 3600 and 1800 RPM with flows to BOILER FEED, CONDENSER WATER,
725 GPM and head to WATER TREATMENT, PRESSURE
BOOSTING
Series e-1532
End suction, close-coupled, the Series e-1532 an ideal choice
foot-mounted pump when footed volutes are required.
available in 1-1/4” through Available with the Bell & Gossett
8” sizes. Motor size 3/4 standard self-flushing Carbon/
PREMIUM to 50 HP at 3500 RPM. Ceramic mechanical seal in 175#
EFFICIENCY Available with stainless steel working pressure design.
PRODUCT
shaft sleeve and Impeller as
standard, with flows to 2500 APPLICATIONS:
GPM, heads to 400 feet. HYDRONIC HEATING AND
COOLING SYSTEMS, GENERAL
Space-saving economy and back pull-out SERVICE, COOLING TOWERS AND
design, plus a rugged construction make INDUSTRIAL USES
Series e-1535
Motor mounted, be mounted vertically or horizontally
end-suction, close- to provide maximum flexibility.
coupled pump available Ball bearing design and standard
in 1’’ through 1-1/2’’ sizes. internally flushed mechanical seal
PREMIUM Motor sizes 1/3 to 5 HP provide long, dependable service.
EFFICIENCY at 3500 RPM. Available in
PRODUCT APPLICATIONS:
bronze-fitted construction
with flows to 240 GPM at 115 feet. This COOLING TOWERS, REFRIGERATION,
back-pullout pump offers ease of service GENERAL SERVICE AND INDUSTRIAL
in a close-coupled design. The pump can
Series 3530
The new standard in close-coupled general and Bell & Gossett’s internally flushed
service pumps. The all new stainless steel Viton/carbon-silicon carbide seal
Series 3530 pump is available in 1", 1-1/4'' provide an optimum worry-free
and 1-1/2'' sizes. 1/2 HP through 5 HP at pump design to 225ºF. Optional EPR/
3500 RPM. Flows to 170 GPM and heads carbon-silicon carbide is rated to
to 155 feet. 250ºF. Maximum pressure is 125 psig.
5
Series VSX
A robust, base-mounted, double-suction pump with a vertically
split casing. Three different suction and discharge flange
orientations provide identical hydraulic performance while
enhancing equipment room layout flexibility.
PREMIUM
EFFICIENCY
PRODUCT Model VSX-VSC vertical suction and discharge flanges
create an extremely compact space-saving design that allows
up to 8,000 lbs. static loading per nozzle.
VSX discharge sizes range from 4" to 18", with flows to 25,000 GPM, heads
to 530 feet and motors to 3,000 HP. Standard features include a groutless,
heavy gauge base plate, alignment friendly coupling and an ANSI/OSHA
compliant coupling guard. Service is simplified with maintenance-free
bearings and an internally flushed one-piece unitized mechanical seal. Both
the bearings and mechanical seals can be replaced without removal of the
rotating assembly, reducing the down time for servicing the pump. The VSX
is available in bronze-fitted construction with working pressures up to
300 psig.
APPLICATIONS:
HYDRONIC HEATING AND COOLING SYSTEMS, CONDENSER WATER,
COOLING TOWERS, REFRIGERATION AND GENERAL SERVICE
VSCS
VSH
6
Pump Accessories/Drives
Triple Duty® Valves
A combination shut-off, center-guided SS stem. A calibrated nameplate
non-slam check valve and calibrated and memory button allow return of
balance valve in one device. The the valve to the balanced position
combination of three valves in one after shut-off. The backseating valve
minimizes cost and reduces installation stem allows repacking under full-line
time. Available in angle or straight pressure.
pattern in 1'' through 16'' sizes; in
APPLICATIONS:
flanged, grooved or NPT connections.
HYDRONIC HEATING & COOLING
The Triple Duty Valve has a cast iron
SYSTEMS, GENERAL SERVICE AND
body, brass seat, cast bronze disc and
INDUSTRIAL
Your local Bell & Gossett representative is available any time and is an experienced professional with
a wealth of technical expertise. In addition to expert system and product application assistance and a wide
product inventory warehoused locally, we offer ESP-Systemwize software selection program.
ESP-Systemwize includes:
• Centrifugal Pumps • Pump Suction Diffuser and Triple Duty Valve
• Air/Dirt Separators • Expansion Tanks
• Heat Exchangers • PIC Valves
Xylem
8200 N. Austin Avenue
Morton Grove, Illinois 60053
Phone: (847) 966-3700
Fax: (847) 965-8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries.
© 2017 Xylem Inc. B-50N May 2017