Académique Documents
Professionnel Documents
Culture Documents
July 2017
iPASOLINK VR 4
GENERAL DESCRIPTION
NEC Corporation
7-1, Shiba 5-Chome, Minato-Ku, Tokyo 108-8001, Japan
GGS-000391-04E
Printed in Japan
iPASOLINK VR 4
GENERAL DESCRIPTION
CONTENTS
1. About iPASOLINK VR
1.1 Overview
In addition, the new product incorporates NEC's newly developed SDN based
network automation and optimization tool called BRM 1. Optimizing the traffic flow
over radio transmission network, it achieves network operation with a high level of
efficiency and reliability, while enhancing end user's quality of experience (QoE).
1. Backhaul Resource Manager (BRM), which is network optimization tool for centeraized management and control in
mobile backhaul network.
1.2 Advantage:
Over 1Gbps high capacity radio transport with minimum number of channels.
10G optical interface and CWDM interface support for seamless connectivity
with optical transport network.
E2E path management with UNMS for simple operation, path visibility, re-route
and load-balancing
Dynamic network optimization based on traffic demands, QoS policies etc. with
BRM (Backhaul Resource Manager / Openflow) architecture
Advanced packet features for E2E QoE enhancement and revenue up.
1.3 Features
• Both GUI and CLI interface support for flexible setting tool
1.4 Availabilities
METRO
10G
>1 Gbs >1 Gbs
10G 10G
> 1 Gbps
CORE
METRO NETWORK
10G
10G
Allocates the high capacity Radio Link and redundancy of Optical Transport:
> 1 Gbps
10 Gbps 10 Gbps
10 Gbps
iX
ETH
ETH
SX
iPASOLINK EX
All-Outdoor-Radio
EX
In the high-density urban area, convergence of the backhaul and fronthaul capacity
and coverage has been improving.
CWDM 1 feature enables to reduce TCO 2, using single fibre only for C-RAN 3. All-
In-One Radio System allows the simple configurations of the Fronthaul, Small Cell,
and New Access at the aggregation sites.
2. SYSTEM CONFIGURATION
2.1 General
iPASOLINK VR provides up to 1238 Mbps transmission capacity per radio link and
advanced modulation scheme operating in 6, 7, 8. 10, 11, 13, 15, 18, 23, 26, 28, 32,
38, or 42 GHz band. Furthermore, iPASOLINK VR is available to support the high-
speed interfaces, such as CWDM for converged mobile and fixed broadband.
The iPASOLINK VR consists of the antennas, Outdoor Units (ODU) and the 19-inch
1U size Indoor Unit (IDU), owing its high performance and reliability in a small form
factor to NEC’s rigid TQC activities and vast experience in the wired and wireless
communication fields.
NOTE: The Combiner/Divider is used in (1+1) single antenna configuration of the ODU
Type directly mounting the antenna.
IDU IDU
DATA I/F Cable f1 I/F Cable
ODU ODU DATA
IN/OUT MD1 MD1
IN/OUT
f1’
IDU IDU
DATA I/F Cable I/F Cable
MD1 ODU (Working) f1 ODU (Working) MD1
IN/OUT DATA
HYB HYB
IN/OUT
MD2 ODU (Standby) f1’ ODU (Standby) MD2
I/F Cable I/F Cable
IDU
I/F Cable f1’ IDU
DATA I/F Cable
MD1 ODU (Working) ODU (Working)
IN/OUT MD1
HYB f1 DATA
MD2 IN/OUT
ODU (Standby) f1 MD2
I/F Cable
ODU (Standby)
I/F Cable
IDU IDU
DATA I/F Cable f1 I/F Cable
MD1 ODU (Working) f2 ODU (Working) MD1
IN/OUT DATA
HYB HYB
IN/OUT
MD2 ODU (Standby) f1’ ODU (Standby) MD2
I/F Cable f2’ I/F Cable
IDU f1 IDU
DATA I/F Cable I/F Cable
MD1 ODU (Working) f1’ ODU (Working) MD1
IN/OUT DATA
IN/OUT
MD2 MD2
ODU (Standby) ODU (Standby)
I/F Cable I/F Cable
IDU f1 IDU
DATA I/F Cable I/F Cable
MD1 ODU (Working) ODU (Working) MD1
IN/OUT f1’ DATA
HYB HYB IN/OUT
MD2 f1 MD2
ODU (Standby) f1’ ODU (Standby)
I/F Cable I/F Cable
IDU f1
DATA I/F Cable I/F Cable DATA
MD1 ODU (Working) ODU (Working) IDU IN/OUT
IN/OUT
HYB f1’
f1
DATA
MDn ODU (Standby) ODU (Standby) IDU IN/OUT
I/F Cable I/F Cable
f1’
n Way
IDU IDU
I/F Cable V(H) V(H)
f1 I/F Cable
MD ODU ODU MD
DATA f1 DATA
IN/OUT HYB HYB f1’ HYB HYB IN/OUT
f1’
MD ODU ODU MD
I/F Cable H(V) H(V) I/F Cable
XIF Cable*
XIF Cable*
*: XIF Cable is not required when MODEMs to configure XPIC are MODEM-AV or MODEM-EV.
*: XIF Cable is not required when MODEMs to configure XPIC are MODEM-AV or MODEM-EV.
2.3.1 Features
ODU-IDU Separate Mounting Type using one coaxial cable only for connection.
Available to select the protection or non-protection system using common ODUs
and IDUs.
Flexible configurations for ODUs and antennas: mounting directly or remotely
for configurations of 1+0 (non redundant), 1+1 hot standby, 1+1 space diversity,
1+1 frequency diversity (Twin-Path), 1+0 XPIC, and N way.
ACCP, ACAP, CCDP and configurations by merging these are available.
Compact size IDU on 19-inch rack.
<Option Card>
MODEM
16E1
STM-1
GbE
MSE Universal Universal Universal
AUX Slot #3 Slot #4 Slot #5
CWDM
Control Bus
Packet Bus
TDM Bus
FAN
TDM SW L2 SW CPU LCT/NMS
16E1
Optional EXT CLK
CLK CLK
(IN/OUT)
MODEM
Slot #2
8 × GbE –48 V DC
MODEM PS
Slot #1 (2 × XGbE)
–48 V DC
PS
Redundant
Power Supply
(Factory Assembled)
Main Board