Académique Documents
Professionnel Documents
Culture Documents
Hinweis
48.4
Measurement menu Display flashes Setting °C or °F
Technical Data testo 608-H1/H2
24.2
zum Messmenü
Messgrößen Feuchte / Temperatur (°C; °F) / Taupunkt (°C, °F) %
Instruction manual
Note
Parameters Humidity / Temperature (°C; °F) / Dew point
°C
Additionally with testo 608 - H 2
Messwertaufnehmer Feuchtesensor / NTC
Sensor Humidity sensor / NTC Setting
Messbereich testo 608 - H1 10...95 %rF / %RH (nicht betauend / no condensation)
parameters Activate “SET” 3 times and return
Measuring range testo 608 - H1 0...+50 °C / 32...+122 °F (°C, °F) to measurement menu
-20...50 °Ctd / -4...122 °Ftd oder
3s
Messbereich testo 608 - H2 2...98 %rF / %RH (nicht betauend / no condensation) or
Measuring range testo 608 - H2 -10...+70 °C / 14...+160 °F
-40...70 °Ctd / -40...160 °Ftd Alarmeinstellungen (nur testo 608 - H 2) / Alarm settings (ttesto 608 - H 2 only)
Genauigkeit testo 608 - H1 ± 3 %rF/%RH (bei/at +25 °C/77 °F)
Accuracy testo 608 - H1 ± 0.5 °C / ± 1°F (bei/at + 25 °C/77 °F)
Genauigkeit testo 608 - H2 ± 2 %rF/%RH (bei/at +25 °C/77 °F)
Accuracy testo 608 - H2 ± 0.5 °C / ± 1°F (bei/at 25 °C/77 °F)
Auflösung 0,1 %rF/ 0,1 °C Undershoot alarm Lower alarm: Upper alarm:
activate “ON”
48.4
Resolution 0.1 %RH / 0.1 °C/0.1 °F Measurement menu flashes Exceed alarm activate “ON”
Display LCD, 2-zeilig Alarm aktivieren deactivate “OFF” flashes deactivate “OFF”
Display LCD, 2 lines / deaktivieren
24.2
Messtakt 18 sec.
Measuring rate 18 s Activating/ %
deactivating the °C
Einsatztemperatur testo 608 - H1 0...+50 °C
Application temperature for testo 608 - H1 32 to 122°F alarm Alarm Alarm Alarm Alarm
ON OFF ON OFF
Einsatztemperatur testo 608 - H2 -10...+70 °C
Application temperature for testo 608 - H2 14...+160°F
2x
3 sec halten oder oder
Lagertemperatur -40...+70 °C
Storage temperature -40...+160°F +1x drücken or or
Batterie-Typ 9 V- Block Hold for 3 s
Battery type 9 V block Press x1
Batterie-Standzeit ca. 1 Jahr
Battery lifetime Approx. 1 year (%, °C, °F, td)
Gehäuse ABS silber mattiert Parameter for alarm Selecting parameter
48.4
Housing ABS silver matted Messgröße für Measurement flashes (%, °C, °F, td)
Maße (B/H/T) 111 mm / 90 mm / 40 mm Alarm menu
Dimensions (W/H/D) (%, °C, °F, td) °C
24.2
Gewicht 168 g auswählen td Note
% % %
Weight 168 g The alarm limit values can
°C
Garantie 2 Jahre Select only be set for one
Messgerät konform zu EN 61 326-1:1997 Warranty 2 years parameter for Alarm Alarm parameter.
Measuring instrument conforms with EN 61 326-1:1997
alarm
(%, °C, °F, td)
Notes on testo 608 - H2 3 sec halten oder
Instructions +3 mal drücken or
- Put in batteries, the instrument switches to continuous operation - You can set an alarm (display ) which is triggered when the measured limit values
are exceeded. The alarm settings are freely selectable for the relative humidity, dew Hold for 3 s
- Battery capacity is monitored Press x3
If the battery symbol appears in the display, you can still measure in continuous point or temperature parameters. The limit values for the alarm can only be set for
operation: one parameter. The alarm for the relative humidity parameter is set by the factory.
- testo 608 - H1 approx. 14 days - Your instrument can be calibrated on site to a reference humidity probe from Testo
- testo 608 - H2 approx. 8 days (flashing alarm) (see Supplementary sheet for more information). Anzeige der Displays lower limit Displays upp er
24.2
ist aktiviert) % % %
°C
Displays limit
-1.8.8.8 48.4
Alarm Alarm
Batterie Segment test Measurement menu values for alarm
anschließen (auf
(condition:
°C
-1.8.8.8 24.2
is activated)
td 3x
richtige Polung achten)
% %
°C
Max Min
Connect battery °C
(ensure polarity is Alarm 2s zusätzlich bei testo 608 - H 2
ON OFF
t
correct) Applies additionally to testo 608 - H 2 Displaying lower Lower limit value Setting lower limit Lower limit value for
42.3
alarm (if activated)
24.2
12.5
anzeigen
28.9
% Grenzwerte für
% % %
Alarm Alarm Alarm Alarm
% Alarm einstellen
Max
Displaying °C
Min
°C °C
Bedingung:
MIN/MAX value Alarm Alarm
ist aktiviert 3x
3s 3s
0973.6080/01/Sh/wh/12.09.2006
Hinweis
48.4
Über- Wurde der aktivierte Alarm-Grenzwert (angezeigt mit ) Measurement
/Unterschreiten einmal über- oder unterschritten erscheint im Display menu Flashing LED until “SET” is confirmed.
der aktivierten - bei Unterschreitung
24.2
No te