Académique Documents
Professionnel Documents
Culture Documents
PS™ Bottle Cappers tighten screw and lug caps from 10 mm to 130 mm. They are easy to
use and a good choice when torque accuracy and repeatiblilty are crucial. The torque output
is easily adjusted by turning an external torque dial with your fingers. PS™ Capping
Machines run on compressed air at 90 psi; they are very quiet and comfortable to use.
PS™ capping machines are lightweight and include ergonomic features such as push to start
and automatic shut off.
How It works
PS™ capping machines are very easy to use. The operator lowers the chuck onto the cap to
be tightened. With a gentle push down (push to start-there are no levers to depress) the
machine starts and tightens the cap in a fraction of a second. When the cap reaches the pre
set torque, the machine automatically shuts off (auto-shut-off), signaling the operator to go
to the next cap.
> Pricing
> Specifications
> Need to tighten small caps? Our PS-100 can handle your small cap requirements,
applying as little as 2 inch.lbs. of torque.
> Need to tighten large caps? Featuring an extremely powerful motor and special
gearing, our PS-300 Power Cap™ is designed to handle caps up to 130 mm in diameter
with ease and precision.
Operating Features:
PS Capping Machine being used without the optional PST-100 Capper Support Stand
PS Capping Machines come ready to operate. The package price includes a PS Capping
Machine with a capper balancer, coil air hose, anti-rotation mat, one chuck, and your
choice of four urethane or white rubber liners (chuck inserts).
> Choose the correct chuck and liners for your PS Capping Machine
> About Chucks and Liners
> About the PS Capping Machine
> Ready to ship
The PST-100 Pneumatic Capper Stand can be purchased as an option. The column of the
stand is 43 inches high and the arm is 30 inches long. The arm of the stand can swivel 360
degrees allowing for a large potential work area for your capping machine. The stand also
makes for easy mounting and organizing of the capping machine, capper balancer and air
hoses.
The KBC 1000 Bench Clamp can be purchased as an option. The KBC-1000 Bench Clamp
allows you to fasten the base of the PST-100 Stand onto your work surface without screwing
the base of the stand directly into your table.
Package price - $850. Includes an PS Capping Machine with a capper balancer, coil air hose, anti-
rotation mat, one chuck and your choice of four urethane or white rubber liners (chuck inserts).
Package price with Stand - $1,050. Includes an PS Capping Machine with PST-100 Pneumatic
Capper Stand, capper balancer, coil air hose, anti-rotation mat, one chuck and your choice of four
urethane or white rubber liners (chuck inserts).
• 43 inches high
KBC - 1000 Bench Clamp - The KBC-1000 Bench Clamp allows you to fasten the base of
the stand onto your work surface without screwing the base of the stand directly into your
table.
Irregular Caps? Our standard chucks ae built to handle irregular caps with no modification,
and no additional charge. Our standard chucks accommodate: Plastic Disc Caps, Dropper
Caps, Spout Caps, Dispensing Caps, Push-Pull Caps, Pour Spout Caps, Pull Spout Caps, Mist
Spray Caps, Flip Top Caps, Over Caps, Sports Caps, and many more.
Chucks
Standard Capping Chucks
Constructed of hard grade aluminum, our chucks come in 16 sizes to fit caps from 10 mm -
130 mm. Each chuck size has a corresponding urethane and white rubber liner size that fit
within it (liners are also referred to as chuck inserts). It is the urethane or white rubber liner
that grips the cap as the capping machine tightens the cap onto the container.
To determine which of our chuck sizes is appropriate for your cap, click on one of the links in
the chart on the right to view the chuck and liner selection chart for your particular Kinex
Capping Machine
Liner-Less Chucks
Built to specification, these chucks are built to tighten or remove caps without the use of a
liner. Depending on the application and the physical nature of the cap, we can machine a
chuck to custom fit your cap, or build a mechanical chuck specifically for your cap.
Liners
Which Insert (liner) is right for you?™
Durometer - Is the international standard for measuring the hardness of rubber, plastic and
other non-metallic materials. A higher durometer rating indicates a harder material.
Custom Molding upon request - If you have a part you would like us to mold
in urethane or vinyl, please contact us.
The Kinex Cap-Rite™ Manual Capper is intended for manufacturers with relatively
low production runs that require a high level of certified torque accuracy. It is ideal
for shippers of hazardous materials that need to comply with DOT regulations, as
well as medical, pharmaceutical and biotechnology companies that need to comply
with strict torque specifications.
The Cap-Rite™ is also a good choice for manufacturers that want to continue to
manually tighten their caps but want to avoid product leakage and other quality
problems that can result from inconsistent hand tightening.
The application torque of a Cap-Rite™ Manual Capper is factory set and locked to
your specification. Available torque settings are from 5 - 50 inch.lbs. The torque
setting can be selected in 1 inch.lbs. increments.
features of your cap. The chuck will fit your cap in a similar way to how a
How it Works
• Place the Cap-Rite™ Manual Capper with attached custom machined
• Upon reaching the specified torque the clutch will release and reset,
The Cap-Rite™ Manual Capper comes ready to operate. The package price includes an
Ergonomic Grip with Integrated Clutch, a custom chuck machined specifically for your
cap and an anti-rotation mat.
To Order
• Choose the Torque Setting - The torque setting of your
Cap-Rite™ Manual Capper will be set, and locked, to your specification. Available
torque settings are from 5 - 50 inch.lbs. The torque setting can be selected in 1
inch.lbs. increments.
• Send Cap and Container Samples - We will need cap and container samples
to machine a chuck to custom fit your cap. Please send at least 25 caps and 3
Irregular Caps? A custom chuck can be machined for your Cap-Rite™ Manual Capper that
will tighten irregular caps such as Dropper Caps, Spout Caps, Push-Pull Caps, Sports Caps,
and many more.