Académique Documents
Professionnel Documents
Culture Documents
Model S-CUBE
Smoke Control Roof Upblast
November
2006
S-CUBE - Spun Aluminum
Roof Upblast Centrifugal Exhaust Fans
When you buy a Greenheck Model S-CUBE, you receive a fan with the industry’s best performance and
durability for Smoke Control Applications (as found in emergency smoke control systems).
• The first spun aluminum UL/cUL Listed fan for Emergency Smoke Control Systems in the industry.
• UL/cUL Listed for 500˚ F (260˚ C) for 4 hours and 1,000˚ F (538˚ C) for 15 minutes.
• Performance up to 2.75 in. wg (685 Pa) and 30,000 cfm (52,000 m3/hr).
• Half the weight of traditional Smoke Control fans, ideal
choice for roof load concerns.
• Low profile, height is less than half of traditional Smoke
Control fans, maximum of 48 inches (1,200 mm) from curb
cap to top of fan.
• Multiple applications, capable of exhausting general clean
air and satisfying emergency smoke control regulations.
• Performance as cataloged is assured. All fan sizes have
been tested in our AMCA Accredited Laboratory and are
licensed to bear the AMCA sound and air performance seals.
• Greenheck subjects these products to extensive life testing,
assuring you that the fans will provide many years of reliable
performance.
Model Comparison
Standard Models
S-CUBE - Belt Drive
Available in eleven sizes with nominal wheel diameters ranging from
10 through 48 inches (254 through 1219 mm).
• Models S-CUBE-101 through S-CUBE-480
Capacities range from 500 through 30,000 cfm (850 through
51,970 m3/hr) with static pressures up to 2 in. wg (498 Pa)
Outstanding Customer Service
Your local Greenheck representative has a wealth of industry
and product knowledge to answer your questions. Our
representatives receive the latest product information and
can have orders processed directly to our factory. With our
direct order processing system, we can ship orders as fast
as the next day. With Greenheck’s experienced staff, we can
answer questions and provide solutions.
Standard Construction Features
1 Steel Wheel - Backward-inclined, non-overloading 9 Motor Cooling - Cooling fins located on top of fan wheel
centrifugal steel wheel is utilized to generate high draw outside air through a large breather tube directly into
efficiency and minimal sound while moving high the motor compartment. Positive motor cooling with fresh
temperature air. air results in maximum motor life.
2 Disconnect Switch - NEMA-3R switch is factory 10 Lifting Points - Select models have various lifting points
mounted and wired as standard. All wiring and electrical located on the drive frame and bearing plates.
components comply with the National Electric Codes
(NEC) and are either UL/cUL listed or recognized. 11 Vibration Isolation - Safety Flange Vibration Isolators
support the drive assembly and wheel for long life and
3 Fan Shaft - Precisely sized, ground, and polished so the quite operation.
first critical speed is at least 25% over the maximum
operating speed. Where the shaft makes contact with 12 Drive Assembly - Dual belts, pulleys, and keys are
bearings, close tolerances result in longer bearing life. oversized 150% of driven horsepower. Machined cast
pulleys are adjustable for final system balancing.
4 Bearings - 100% factory tested and designed specifically
for air handling and high temperature applications with 13 Windband - One piece, heavy gauge aluminum with a
a minimum L10 life in excess of 100,000 hours (L50 rolled bead for extra strength directs exhaust air away
average life of 500,000 hours). from the mounting surface.
5 Motor - Carefully matched to the fan load and is mounted 14 Welded Leakproof Construction - One-piece windband
out of airstream. is continuously welded to the curb cap and drain trough,
for superior strength.
6 Motor Cover - Constructed of aluminum. Attached with
stainless steel fasteners for easy removal and access to 15 Curb Cap with Mounting Holes - Aluminum curb cap
the motor compartment and drive assembly. has pre-punched mounting holes to ensure correct
attachment to the roof.
7 Heat Baffle - Insulated to keep motor compartment cool
and extending motor life. 16 Drain Trough - Allows for one-point drainage for water.
8 Stainless Steel Fasteners - Allow easy removal and 17 Name Plate - Permanently engraved aluminum plate for
access to the motor compartment and drive assembly. exact model and serial identification.
3 6 12
4
10
8
13
5
11
10
17
16
14
15
Options and Accessories
Coatings - Wide variety of coatings and colors are available Disconnect Switches - Other NEMA
for decorative to protective applications. rated switches are available for
positive electrical shutoff and safety,
Birdscreen - Galvanized or aluminum rigid wire to protect including: dust-tight, rainproof, and
the fan’s discharge from birds or small objects. corrosion-resistant.
Curb Seal - Rubber seal between fan and curb to assure Tie Down Points - Four brackets located on the windband
proper sealing when attached to a curb. for securing the fan in heavy wind applications.
Roof Curbs - Wide variety of roof curbs are available for Hinge Kit - Allows maintenance
mounting the fan to the personnel to raise the entire fan
roof, including: vented, from the hinges to gain access to
flanged, pitched, and wheel and ductwork for regular
sound-absorbing. inspection and cleaning.
Typical Installations
The S-CUBE is specifically designed for Emergency Smoke Control applications. These fans are UL/cUL Listed for Electrical
and Power Ventilators for Smoke Control Systems for 500˚ F (260˚ C) for 4 hours and 1,000˚ F (538˚ C) for 15 minutes.
Factory
Due to the varying airstreams encountered in commercial Installed
NEMA-3R
Heat Baffle
ventilation, system designers must be aware of national, Disconnect
factory wired
state, and local codes and guidelines governing these from motor to
installations. Local code authorities should be consulted disconnect
through the
before proceeding with any ventilation project. breather tube
S - C UBE - 240 - 5
Motor HP (Belt Drive only)
Smoke Control Fan 4 = 1/4 10 = 1 30 = 3
3 = 1/3 15 = 11/2 50 = 5
C-Series Fan 5 = 1/2 20 = 2 75 = 71/2
7 = 3/4
Configuration Fan Size
UBE - Belt Drive Roof Mounted 101 through 480
S-CUBE-101 - Belt Drive
247/8
(632)
H-
*281/4 (718)
173/8
(441)
wg
e
ur v
mc
13/4 (44)
ste
s sy
19
thi
(483)
of
ef t
l
Damper Size = 12 x 12 (305 x 305)
he
t
Roof Opening = 141/2 x 141/2 (368 x 368)
t to
ec
Windband Thickness = 0.051 (1.3) l
s
e
Motor Cover Thickness = 0.040 (1.0) n ot
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 58 lb. (26 kg) cfm
*281/4 (718)
173/8
rve
(441)
cu
wg
ystem
this s
13/4 (44)
f
eft o
19
(483)
th e l
ct to
Damper Size = 12 x 12 (305 x 305)
sele
Roof Opening = 141/2 x 141/2 (368 x 368)
Windband Thickness = 0.051 (1.3)
ot
n
Motor Cover Thickness = 0.040 (1.0)
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 58 lb. (26 kg) cfm
*281/4 (718)
173/8
(441)
wg
e
urv
mc
13/4 (44)
ste
s sy
19
thi
(483)
of
ef t
el
Damper Size = 12 x 12 (305 x 305)
th
Roof Opening = 141/2 x 141/2 (368 x 368)
to
ct
Windband Thickness = 0.051 (1.3)
le
e
ts
Motor Cover Thickness = 0.040 (1.0) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 66 lb. (30 kg) cfm
*281/4 (718)
173/8
(441)
e
wg
urv
mc
yste
13/4 (44)
is s
19
f th
ft o
(483)
le
he
t
Damper Size = 12 x 12 (305 x 305)
to
Roof Opening = 141/2 x 141/2 (368 x 368)
ct
ele
Windband Thickness = 0.051 (1.3)
ts
no
Motor Cover Thickness = 0.040 (1.0) Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 66 lb. (30 kg) cfm
*293/4 (756)
193/8
(492)
wg
urve
mc
yste
13/4 (44)
is s
22
f th
(559)
le ft o
he
Damper Size = 16 x 16 (406 x 406)
t
to
Roof Opening = 181/2 x 181/2 (470 x 470)
ct
ele
Windband Thickness = 0.051 (1.3) ts
Motor Cover Thickness = 0.040 (1.0) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 84 lb. (38 kg) cfm
*293/4 (756)
193/8
(492)
e
curv
wg
tem
s sys
13/4 (44)
f thi
22
ft o
(559)
th e le
Damper Size = 16 x 16 (406 x 406)
to
Roof Opening = 181/2 x 181/2 (470 x 470)
ct
ele
Windband Thickness = 0.051 (1.3)
ts
no
Motor Cover Thickness = 0.040 (1.0)
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 84 lb. (38 kg) cfm
*293/4 (756)
193/8
(492)
wg
e
urv
mc
13/4 (44)
ste
s sy
22
th i
(559)
of
ef t
el
Damper Size = 16 x 16 (406 x 406)
th
to
Roof Opening = 181/2 x 181/2 (470 x 470)
ct
le
Windband Thickness = 0.051 (1.3) t se
Motor Cover Thickness = 0.040 (1.0) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 87 lb. (39 kg) cfm
*293/4 (756)
193/8
(492)
wg
e
ur v
mc
13/4 (44)
ste
s sy
22
thi
(559)
of
t
lef
Damper Size = 16 x 16 (406 x 406)
het
Roof Opening = 181/2 x 181/2 (470 x 470)
to
ct
Windband Thickness = 0.051 (1.3)
le
t se
Motor Cover Thickness = 0.040 (1.0) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 87 lb. (39 kg) cfm
*285/8 (727)
21
(553)
e
curv
wg
stem
13/4 (44)
is sy
h
30
of t
(762)
left
the
Damper Size = 18 x 18 (457 x 457)
to
Roof Opening = 201/2 x 201/2 (521 x 521)
t
lec
se
Windband Thickness = 0.064 (1.6)
ot
n
Motor Cover Thickness = 0.040 (1.0) Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 142 lb. (64 kg)
cfm
All dimensions in inches (millimeters).
*May be greater depending on motor.
^Weight shown is largest cataloged Open Drip Proof motor.
*337/8 (860)
251/2
(648)
wg
e
ur v
mc
13/4 (44)
yste
is s
34
f th
(864)
left o
Damper Size = 24 x 24 (610 x 610)
he
ot
Roof Opening = 261/2 x 261/2 (673 x 673)
tt
ec
Windband Thickness = 0.064 (1.6)
ts
el
Motor Cover Thickness = 0.051 (1.3) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 175 lb. (79 kg) cfm
36 (914)
29
(737)
wg
ve
cur
tem
13/4 (44)
sys
40
s
thi
(1016)
of
ef t
el
Damper Size = 30 x 30 (762 x 762)
th
to
Roof Opening = 321/2 x 321/2 (826 x 826)
t
ec
Windband Thickness = 0.080 (2.0) ts
el
Motor Cover Thickness = 0.051 (1.3) no
Do
Curb Cap Thickness = 0.064 (1.6)
^Approximate Unit Weight = 313 lb. (142 kg)
cfm
All dimensions in inches (millimeters).
*May be greater depending on motor.
^Weight shown is largest cataloged Open Drip Proof motor.
*391/8 (994)
293/8
(746)
wg
e
ur v
mc
13/4 (44)
e
yst
46
is s
f th
(1168)
to
lef
Damper Size = 36 x 36 (914 x 914)
he
ot
Roof Opening = 381/2 x 381/2 (978 x 978)
tt
ec
Windband Thickness = 0.080 (2.0) el
ts
Motor Cover Thickness = 0.064 (1.6) no
Do
Curb Cap Thickness = 0.080 (2.0)
^Approximate Unit Weight = 440 lb. (200 kg)
cfm
All dimensions in inches (millimeters).
*May be greater depending on motor.
^Weight shown is largest cataloged Open Drip Proof motor.
*443/4 (1137)
351/4
(895)
e
wg
curv
tem
13/4 (44)
sys
his
52
of t
(1321)
t
lef
he
Damper Size = 42 x 42 (1067 x 1067)
t
to
Roof Opening = 441/2 x 441/2 (1130 x 1130)
ct
ele
Windband Thickness = 0.080 (2.0)
ts
Motor Cover Thickness = 0.064 (1.6) no
Do
Curb Cap Thickness = 0.100 (2.5)
^Approximate Unit Weight = 578 lb. (262 kg)
cfm
All dimensions in inches (millimeters).
*May be greater depending on motor.
^Weight shown is largest cataloged Open Drip Proof motor.
*481/8 (1222)
36
(914)
wg
e
curv
em
13/4 (44)
yst
is s
58
f th
(1473)
to
lef
e
Damper Size = 48 x 48 (1219 x 1219)
th
to
Roof Opening = 501/2 x 501/2 (1283 x 1283)
ct
Windband Thickness = 0.080 (2.0)
le
e
ts
Motor Cover Thickness = 0.064 (1.6) no
Do
Curb Cap Thickness = 0.100 (2.5)
^Approximate Unit Weight = 675 lb. (306 kg)
cfm
All dimensions in inches (millimeters).
*May be greater depending on motor.
^Weight shown is largest cataloged Open Drip Proof motor.
Our Warranty
Greenheck warrants this equipment to be free from defects in material and workmanship
for a period of one year from the purchase date. Any units or parts which prove defective
during the warranty period will be replaced at our option when returned to our factory,
transportation prepaid. Motors are warranted by the motor manufacturer for a period of
one year. Should motors furnished by Greenheck prove defective during this period, they
should be returned to the nearest authorized motor service station. Greenheck will not be
responsible for any removal or installation costs.
As a result of our commitment to continuous improvement, Greenheck reserves the right
to change specifications without notice.