Académique Documents
Professionnel Documents
Culture Documents
LEGEND
........--_ NATIONALHIGHWAYS
........--__ STATEHJGHWAYS
••
_... • - .. -
DISTRJCT HQ
TALUKHQ
DISTRICT BOUNDARY
,............__ MANGALOREClRCLE
76 6
-
l;r(i}~
~~0
C5() ~
-
~~:6~~~~~1\, ZJoddJ ~~
~
SCHEDULE OF RATES
PW,P&IWTD,
SOUTH ZONE
2016-17, BANGALORE
INDEX
SI.No. Particulars Pages
From To
3. WEIGHTAGE .............................................................•................................ e f
CHAPTERS .•..............•.......................................•........................•.........•...............
19.0 EARTH WORK EROSION CONTROL AND DRAINAGE .......................... .. 141 153
24.0 TRAFFIC SIGNS, MARKINGS &OTHER ROAD APPURTENANCES ...... .. 181 196
30.0 BRIDGES - RIVER TRAINING WORKS AND PROTECTION WORKS .... .. 239 241
2016-17 c:Se ~~c::l ;!jo.:ltiF ~~ ti~~li~ (d!re) ;;:l~oj:)~ ;ljofJO~Ndoa ;.,;:)~~ ddo:l~ ~c::b~edc:S l\let!:l;;:l £J1)_.
ero~~~= 1) S'l ti~eo .:l~ ;!jo:o:m~o:;!jotidg~iir.l~:;!j~o-4:2014-15 ON<lotig 09-04-2015
2) ~~~~ti ~£tloj:)o~d~. dr.l~~ ~oli~~ ;;:lel~ d;;:ld ~Q~aoj:)~ c::lt!d ;;:l~oj:) ~~d dd.:l~ ~o:b;)Olr.l ;!j~lif,;l
ON<lotig 27-04-2016, 10-05-2016, 31-05-2016 05ClM 13-07-2016
3) o:m~6 ~£tloj:)o~d~. ;!joti(d), ~oli~~ d;;:ld ~Q~aoj:)~ d!re ;;:l~oj:)d dd.:l~ ~o:b;)IJ'DO) ;!j.:l:l~oj:) ;!j~
ON<lotig 26-05-2016 (e;3.Jel~~). ON<lotig 15-06-2016 ('8~og, ti~eiJ, ~oli~~). ON<lotig10-08-2016 (05Cl;ljC\l),
ON<lotig 20-08-2016 (~~el ~c5de~d ~.:l:l ~~
4) S'l ti~eo .:l~ ;!jo:o:m~o:;!jotidg~iir.le:;!j~o-4:2016-17 ON<lotig 28-06-2016
5) ~~~~ti ~£tloj:)o~d~. dr.l~iir.leo:loir.l~l\ 05ClM fJOd~ ~~ f..f,'lN<lt!:l F.::l~~M ~a.J~. ~oli~~ ;;:lel~ d;;:ld o:l~
;!jo:.;);t:i"~~N:.;)~-3:SR:2016-17 ON<lotig 27-10-2016
6) S'l ti~eiJ .:l~ ;!jo:o:m~o:;!jotidg~iir.l~:;!j~o-4:2016-17 ON<lotig 03-11-2016
7) ON<lotig 15-11-2016 dod:l ;!j'DO)Fdd 'DO)cmFd~Fiif,;l ~~acm~ c::lt!d d!re ;;:l~cmd ~oli...tr.l~ ddo:l~ ;!j~cm C\li2<!;;:l91i'Ob
~~c:3:
ero~e~ (1) d~ 2016-17 c:Se ~~c::l d!re ;;:l~cmd N;;:;~ ddo:l~cmc::b~ ~o:b;)O~;;:l ltlo~ ~~e~ti ~£tloj:)o~d~. dr.l~iir.leo:loir.lel\
05ClM fJOO~ ~~ f..f,'lN<lt!:l F.::l~~M ~a.J~. ~oli~~ ;;:lel~ d;;:ldc::b~ c:ir.le~~ ~~lr.lOcmo~ 05ClM ~~e~ti ~£tloj:)o~d~.
dr.leiir.leo:loir.l~l\ 05ClM fJOd~ ~~ f..f,'lN<lt!:l F.::l~~M ~a.J~. ti~~lif,;l ;;:lel~' e;3.Jel~~ ;;:lel~' 05Cl;!jC\l ;;:lel~ 05ClM ~oli~~ ;;:lel~
d;;:ldc::b~ ;!jt;j;!j6dN<l~11 c:S~.:l:l;!ja.Jl\~~0.
ero~e~ (2) d c;!,ir.ld c::lt!d ~~~~ti ~£tloj:)o~d~. dr.leiir.l~o:loir.lel\ 05ClM fJOd~ ~~ f..f,'lN<lt!:l ~~~M ~a.J~. ~oli~~
;;:le)~ ~;;:ld ~!:i:l~acm~ c::lt!o ;!j~li,~ 2016-17 c:S~ ~~c::l od.:l~oj:)c::b~ ~a.J.ro<) (\)oj:)~;;:l9 ~~6oj:) sd c;!,'DO)d ;;:l~oj:)o;Jc)~
~o:b;)Me.xl l\lQFO;!j~l\~~0.
ero~e~ (3) d c;!,'DO)d c::lt!d dd.:l~ ~o:b;)IJlr.l ;!j.:l:l~ ;!j~oj:)~ ~oli~~(o;i)el~~;aw;!jc::l 05ClM ~oli~~ ;;:lel~ d;;:l~1i9od
~~~ ~~ Oc::lltr.l~ ddlif,;lc::b~ o:lt!oj:)a.Jl\~~0 05ClM ~oe~ti a3~;;:lO, o:mo~d ;;:;;;:ldlif,;lc::b~ ~z.!F;Ija.Jl\~~0.
ero~e~ (4) d o:l~d~. ON<lotig15-06-2016 dod~ '8eog, ti~eoodJ~ c:St!d ;!jQodJ~ ~z.!FN Mzd;lja.Jl\d~;;:loa
2016-17 c:Se ~~c::l dr.leiir.leo:loir.lel\ ~a.J~. ;!joo:ltiF ~~ ti~~li~ d!re ;;:l~oj:)~ 2.-.ooe ddo:l~oj:)c::b~ Z3ClOM9;!je.xl ddo:l~
~o:tr.lo'8cm~ Oc::lltr.l~ ~tidd odliQC\b~ 'DO).:l:lFti e;,am~ a3.r.ld~N~;;:l e;,oe~ooa .:lOii~;!je.xl 05Clltr.l .;)~ !!;3~1i9od ii:ir.lmti~ odli'Ob
05ClM ~oe~ti ii:ir.l~acmc::b~ l\l~~ 2.-.~~~Nd ddlif,;lc::b~ 2..9Mo~oa 2016-17 c:S~ ~~c::l ;!jo.:ltiF o::b~ ti~~li'Ob d!re ;;:l~cmd tid<::lJ
od.:l~cm~~ ~o:tr.lON ;!j~;!je.xl ~~~Sti ~£tlcmo~dm, ~oli...tr.lm ;;:le)~ d;;:lM ~9;!ja.Jl\d:l~o.
ero~e~ (5) d~ ~~~titi ~£tloj:)o~d~. dr.l~fJo 05Clltr.l 2..~~~ ~oli~d:l ~,~ d;;:l~ ;!j~Nr< tid!:!:~ ddo:l~oj:)(ii), o:lMe~N,
M M """ t:J~ M Q tJ "\.
dr.leiir.l~.:loir.lel\ ~a.J~. ;!jo.:ltiF o::b~ ti~~li'Ob (dore) ;;:l~cm~ 2016-17c:3e ~~n 2.-.oo~ dd.:l~cmc::b_, a3.r.ld~;!je.xl ON<lotig23.09.2016
~ w ~ ~ w """
05ClM 21.10.2016 do~ c::lt!d ;::i:Jc)Nti c;!,1i~ o:lMWN<l ;!j~r(f,;l~ l\l~~~o;:j ~;;pcld1c::b~ o:lM~N ;!jlr.)Fdd ;!jc;5~~7icll\ S'l ti~eOoj:)
ero~e~ (6)d .:l~d~ 2016-17c:3e ~~c::l ddo:l~oj:) tid!:!:~ c;!,~oj:)c::b~ ;!jir.lFdd ;!jc5~~7icll\ ;!j~;!ja.Jl\~~o.
ON<lotig 15.11.2016 do~ ;!jir.lFdd o::b~d~ c::lt!d ddo:l~ ;!j~oj:) C\li2<1;;:l9oj:)~ 2016-17c:3e ~~c::l dr.leiir.leo:loir.lel\ ~a.J~
d!re;;:l~oj:)d ddo:l~ Z3ClM ~d:l;;:l~ ;!jc5o::b~ l\l~~o.
:: e;,~~z ::
;!jo~6 :o:m~op:jotid,t;tm'tir.le/.;)~-4/ddo:l~016-17 ON<lotig 21.11.2016
.:l~;;:lc:Scm~
~ -~ M
;;:;;;:loNoo;;:l ;;jJeort 2016-17 c:S~ ~~c::l ;!jo.:ltiF ~~~ ti~~
eJ
(dore)
c4
;;:l~odJd N;;:;~ od.:l~cmc:i),
eJ "'\.
ON<lotig 01-12-2016 ooo Z3ClM f.)~;;:loa ~c::b~eO;!ja.Jl\o 05Clltr.l S'l od.:l~cxm
W
o:mooc::l e;,oe~d;;:lort Z3ClOoj:)~~~o.
M ~
"l'J'&J/-
(~0". ~~N~;rj)
~~6 ~~o::boi!d~.
"l'JoQ!ltiF ~:3:l ti~,~1ieob (dar&)
.... ~ <:..\
~oli~~
a
~~~~cot ~dd ~d~:S~l\ ~~~d.
1) o;Q<Jc::J 'Dclo:bF"d~F"IifOb, d.r.l~5Jil~o:Jw~n e.Jodm ~~ &..f,;lc:.:m~ ~~il:iiloii ~~~. o:J'Dcl;r:l~Q. z:3oliMC:l.
2) 'Dclo:bF"d~F"IifOb, d.r.l~5Jil~o:Jw~n e.Jodro ~~ &..f,;lc:.:m~ ~~il:iiloii ~~~. o:J'Dcl;r:l~Q. z:3oliMro.
3) 'liclo:bF"d~F"IifOb, c:J~OClii:lO ~~~. ci:J'Dcl;r:l~Q. z:3oliMC:l.
4) 'Dclo:bF"d~F"IifOb, ;r:l~c:J~OClii:lO ~~~. o:J'Dcl;r:l~Q. z:3oliMro.
5) ii:l6ii:l~o:l5 c:Jon~5m, '8.e;,O"'.~ ..!J ..w~ .• z:3oliMC:l.
6) ii:l.J.J.W6 w~~c:.:mO'liclO, '8~o:1'. z:3oliMC:l.
7) ii:l.J.J.W6 we~c:.:m e:>O'DclO, .w;fl'a323"~o:J. z:3oliMC:l.
8) o;Q<Jc::J e:>ft)o:bo:!!idd:l, e.JeJa:lo"' z:3oliMC:l ~Wllc::llid iiml~'8. z:3oliMC:l
18) Project Director, e-govrenance Department, e-procurement Cell, No.141, M.S.Building ii:l.J.Jot:lc::J ~~"Dcl.o"
d~c:J.!Jo.
19) e:>0~~5 e:>f!:lo:bo:!!ldm, d.r.l~5Jil~o:Jw~n e.Jodm Wllli.r.l &..f,;lc;:m~ ~~il:iiloii ~~~. 5~~1if,;l ii:leJ~' z:3oliMC:l : o&>el~m
ii:lel~: ro~F" ii:lel~ : Q<Jd~~ ii:lel~ : ~oliMC:l ii:lel~: Wll;r:lc::l ii:lel~ : e.J~O ii:lel~: z;3f,;lrn;o ii:lel~ ~~ !>ii:l~~ ii:lel~
20) O<l0~5 c:Jo~F"~5m, 5c:.:mF"~5 5Jilf,;lfl~o e:>f!:lii:leJ~ ~o~~.
z:3oliMC:l
21) e:>0~55
c..\
e:>ft)o:bo:!dd:l, o:lo~o:b0"0Cl23" ~o~c:Jo:bOon" ~,:!,
z:3oliMC:l, ci:J~~~ ;r:lre£'t) c:JeOClii:lO ~,:! z:3oliMC:l, ~,~d:l
~-" eJ~..D
22) 'Dclo:bF"iiml~5 ~o~c:Jo:bm, d.r.l~5Jil~o:Jw~n e.Jodro Wlll'tr.l &..f,;lc;:m~ ~~ilmM ~~~ o:JtjrcllilifOb, og,re ii:l~o:b
23) 'Dclo:bF"iiml~5 ~o~c:Jo:bO"' ;r:l~ c:J~OClii:lO o:Jtjrclli
24) dare ii:l~o:bd ;r:lWllo:b5 'Dclo:bF"iiml~5 ~o~c:Jo:bd:l d.r.l~5Jil~o:Jw~n e.Jodm Wlll'tr.l &..9c:.:m~ ~~ilmM ~~~ eroo:J
""'
ci:Jtjrclli.
(ts~. ~~N~:I!)
~~~~ e:>~cmo.Sddl,
b
GENERAL NOTES TO THE S.R. OF CIVIL WORKS
SOUTH ZONE FOR THE YEAR 2016-17
1. The specifications drawn in this SR for roads, bridges, culverts and buildinqs are based on recent publication of
IRC, NBC & IS codes.
2. Only short & abridged specifications have been published in this S.R. For detailed specifications the following
books shall be referred,
a. Karnataka Building Specification KBS
b. Karnataka Standard Rate Analysis for Buildings KSRB
c. Karnataka Roads and Bridges Specifications KRBS
d. Karnataka Standard Rate Analysis for Roads
and Bridges KSRRB
3. The schedule of rates book along with detailed specifications furnished in the form of soft copy, constitute complete SR.
4. The material component rate indicated in the SR are the prevailing market rates inclusive of taxes, duties, lead,
loading and unloading charges.
The prevailing market rates of cement, steel and bitumen will be approved by the Superintending Engineer
and published whenever the variation in price is more/less than 10% over the previously approved rates.
Such revision shall be effected with a minimum interval of 30 days. These approved rates shall be adopted both
for preparation of estimates and evaluation of tenders.
5. The rates for finished items of works indicated in the Schedule of rates are inclusive of lead, lift, 10% contractors
profit, 10% over head charges, loading and unloading charges. Extra lead, loading and unloading charges shall
not be added except otherwise mentioned in specific cases.
6. To arrive at the rate for item of works, for which materials are available, the following procedure shall be adopted
Example
Finished rate = A
Deduct cost of material = B
Deduct 10% over head charges on 'B' = c
Deduct 10% Contractor Profit on 'B' = D
Arrived rate 'E' = A- (B+C+D)
7. For ensuring the quality aspect of the materials used by the contractors such as cement, steel and bitumen etc.,
it is necessary that the contractor shall furnish the quality control test certificates for these materials. Department
will have the right to get these materials tested at the cost of contractor.
8. Measurement of doors, windows, ventilators, cupboards etc., shall be taken outside to outside of frames
and coefficients for painting varnishing etc. shall be adopted as per the coefficients prescribed in the IS SP
27-1987(extract enclosed in annexure)
9. Reinforcement shall be measured in length including hooks. The laps and wastages shall not be measured and
paid. Couplings, welded joints, spacer bars, annealed steel wire used for binding shall not be measured as the
cost of these items are deemed to have been included in the rates.
10. The teak wood items are to be operated only with the prior approval of Superintending Engineer.
11. The volume of reinforcement in RCC works need not be deducted from the measurement of concrete quantity.
12. The mosaic tiles, vitrified tiles and granite slabs, prepolished cement concrete tiles, pre polished granite tiles shall
be procured by the agency only after obtaining approval from the Executive Engineer.
13. The natural/ river sand to be used shall be clean, sieved and of good quality. As far as possible natural/ river sand
shall be used. Whenever there is scarcity of natural/ river sand, artificial/ manufactured sand can be used to a
maximum extent of 50% of total sand quantity for plastering items and 100% for concrete items .. The certification
by the concerned Executive Engineer, Q.C. is mandatory for usage of artificial/ manufactured sand.
c
14. The use of filtered sand is totally banned in all items of civil works.
15. If the rates for certain items of works are not found in this SR then such items shall be obtained from SR of Minor
Irrigation/National Highway/ PRED/ KUWS & DB/BWS & SB.
16. For items not found in any of the SR data rates shall be prepared and got approved from competent authority.
17. For all RCC works the rate is exclusive of Steel and fabrication. For chapter 5 i.e. Stone works, Chapter 6 i.e. Brick
works and Chapters 25-33 i.e. For Bridge Works, the rates are inclusive of form works, scaffolding and centering.
18. For Road works, rates indicated for 'EARTHWORK FORMATION, GSB, WBM, WMM and ASPHALT ITEMS' are
for compacted thickness.
19. The rates of materials indicated in the SR are only for deriving finished rates of items and for working out data
rates and shall not be adopted for making direct payments.
20. RMC : While using RMC, taking out the samples at worksite is mandatory for conducting necessary tests. It is the
responsibility of the contractor to assure and ensure quality of RMC at the work spot as per design mix for which
Executive Engineer shall obtain necessary test certificates as per IS Standards.
21. TMT Steel :The Steel used in all construction works should confirm to IS 1786/IS 2830 for both physical and
chemical tests.
In Bridge works only Round TMT bars shall be used for dowel bars.
For lapping steel reinforcement, preferably 25mm and above, only welding splices shall be done.
In the case of CC pavement, load transfer-dowel bars used at the expansion joints, construction joints (and also
at contraction joints, if used) should be rounded steel bars as one side of the dowel bars are to be de-bonded
to allow foe expansion I contraction of the CC slabs. In the case of continuously reinforced concrete pavements
(CRCP) also, rounded steel bars are to be used in order to enable expansion I contraction by de-bonding at the
locations of joints.
In the case of bars at longitudinal joints, use of twisted steel bars is more advantageous.
22. The Task Force Committee has issued, directions to adopt minimum cement constants of various cement mix
as per IS 456 along with super plastisizer. The specifications of concrete items are modified indicating the Mix
design along with constant adopted for cement, jelly and sand. Table for Design mixes of concrete is indicated in
Chapter- 4.
23. Procedure for design mix as enumerated in the chapter on concrete shall be adopted.
24. The design mix shall be got certified from the Quality Control Authority I Quality Assurance Authority I Engineering
Colleges/ Other certified Quality Assurance Laboratories by the user Department.
25. 50G solid blocks should be used only for load bearing walls.
26. Comments/ suggestions may be sent by pastor e-mail. to SE office- sebcpwd@yahoo.co.in, sebgl@kpwd.gov.in and
CE office - cecbs@kpwd.gov.in
(R. Sreenivasa)
Chairman, SR Committee
Chief Engineer,
Communication and Building (South),
Bangalore.
d
Weightages to be added for finished items of works to be executed
in the following places:
Hill stations
A) MOTARABLE AREA
0-150 m. 5%
5. Forest Area 5%
II Bangalore Circle
e
Ill Mysore Circle
4. Piriyapatna Taluk 3%
5. Kollegala Taluk- Ramapura Hobli only 3%
6. Kollegala Taluk- Hanur Hobli only 2%
IV Hassan Circle
1. Hassan District
Belur Taluk 5%
Arakalgudu Taluk 5%
Sakaleshpura Taluk 8%
Alur Taluk 5%
2. Chikkamagalur District
Chikkamagalur Taluk 5%
Mudigere Taluk 5%
Koppa Taluk 5%
Sringeri Taluk 5%
N.R. Pura Taluk 5%
3. Major Irrigation command area 5%
V Mangalore Circle
Note : 1. Only one weightage is applicable for each work. If two weightages are applicable whichever is
higher is to be considered.
2. Only one of the above condition is applicable to one particular work duly certified by Executive
Engineer & additional weightage 2% is allowed to Naxallite affected areas duly certified by the
Executive Engineer.
3. Necessary certificate should be obtained from concerned Department for Forest area, Sugar
Factory area, Mining Area & Wildlife sanctuary.
f
MATERIAL COMPONENTS
I
MATERIAL COMPONENTS
II
MATERIAL COMPONENTS
IV
MATERIAL COMPONENTS
v
MATERIAL COMPONENTS
VI
MATERIAL COMPONENTS
VII
MATERIAL COMPONENTS
VIII
MATERIAL COMPONENTS
IX
MATERIAL COMPONENTS
X
MATERIAL COMPONENTS
XI
MATERIAL COMPONENTS
XII
MATERIAL COMPONENTS
XIII
MATERIAL COMPONENTS
XIV
MATERIAL COMPONENTS
426 0167 Gl 'J' or 'L' hook with nuts and bolts 8 mm dia Each 17.00
427 0291 Pintels including welded pins Each 13.00
428 0492 C.P. brass brackets Pair 33.00
429 2084 Hydraulic door clouser- aluminium body No. 897.00
17. PAINTINGS
430 0015 Aluminium paint L 205.00
431 0016 Alum inium paint primer (red oxide) L 100.00
432 0020 Anticorrosive bitumastic paint L 140.00
433 0033 Black Japan paint L 115.00
434 0131 Dark shade pigment Kgs 202.00
435 0132 Distemper primer L 70.00
436 0136 Dry Distemper Kgs 66.00
437 0137 Enamel metal paint L 250.00
438 0138 Enamel primer L 100.00
439 0214 Light shade pigment Kgs 180.00
440 0247 Medium shade pigment Kgs 215.00
441 0285 Paint remover L 130.00
442 0289 Pigment Kgs 110.00
443 0290 Pink primer paint L 140.00
444 0300 Plastic emulsion paint L 230.00
445 0320 Ready mix primer paint L 85.00
446 0321 Ready mix red lead paint L 85.00
447 0323 Red oxide Kgs 88.00
448 0430 Undercoat flatting varnish L 165.00
449 0431 Unslaked lime qtl 460.00
450 0432 Varnish L 130.00
451 0433 Wall paint L 185.00
452 0435 Water proof cement paint Kgs 80.00
453 0438 Wax polish Kgs 250.00
454 0271 Oil bound distemper Kgs 70.00
455 0428 Turpentine Oil L 75.00
456 0543 Anodized M R F painting Sqm 330.00
457 0447 White lead paint for priming L 110.00
XV
MATERIAL COMPONENTS
XVI
MATERIAL COMPONENTS
XVII
MATERIAL COMPONENTS
XVIII
MATERIAL COMPONENTS
XX
MATERIAL COMPONENTS
XXI
MATERIAL COMPONENTS
XXII
MATERIAL COMPONENTS
651 0118 Gun metal non-return valve 1OOmm nominal bore vertical type Each 2,350.00
652 0119 Gun metal non-return valve 25mm nominal bore horizontal type Each 550.00
653 0120 Gun metal non-return valve 25mm nominal bore vertical type Each 420.00
654 0121 Gun metal non-return valve 32mm nominal bore horizontal type Each 670.00
655 0122 Gun metal non-return valve 32mm nominal bore vertical type Each 670.00
656 0123 Gun metal non-return valve 40mm nominal bore horizontal type Each 870.00
657 0124 Gun metal non-return valve 40mm nominal bore vertical type Each 810.00
658 0125 Gun metal non-return valve 50mm nominal bore horizontal type Each 1,210.00
659 0126 Gun metal non-return valve 50mm nominal bore vertical type Each 1,150.00
660 0127 Gun metal non-return valve 65mm nominal bore horizontal type Each 1,675.00
661 0128 Gun metal non-return valve 65mm nominal bore vertical type Each 1,450.00
662 0129 Gun metal non-return valve 80mm nominal bore horizontal type Each 1,960.00
663 0130 Gun metal non-return valve 80mm nominal bore vertical type Each 1,760.00
664 0139 European type water closet of specified make Each 1,100.00
665 0143 G. I. 32mm dia telescopic flush pipes with fittings I specials Set 360.00
666 0144 G. I. Flush pipe of standard size and C.P brass spreaders, Set 525.00
brass unions and clamps 'including fittings
667 0145 G.l. Jam nut Each 24.00
668 0159 Gate valve 15mm nominal bore -gun metal Each 260.00
669 0160 Gate valve 20mm nominal bore-gun metal Each 320.00
670 0161 Gate valve 25mm nominal bore-gun metal Each 475.00
671 0162 Gate valve 32mm nominal bore-gun metal Each 775.00
672 0163 Gate valve 40mm nominal bore-gun metal Each 1,050.00
673 0164 Gate valve 50mm nominal bore-gun metal Each 1,650.00
674 0165 Gate valve 65mm nominal bore-gun metal Each 2,075.00
675 0166 Gate valve 80mm nominal bore-gun metal Each 2,475.00
676 0204 Indian type water closet of size 580 mm of specified make Each 700.00
with footrests
677 0273 Orissa pattern of size 575x425 mm with integral type foot rests Each 1,400.00
678 0274 Oval shape mirror of size 450x350mm with plastic Each 600.00
moulded frame
679 0275 P.V.C automatic flushing cistern 7.5 litres with fittings Each 700.00
680 0276 P.V.C automatic flushing cistern with fittings 10 Its Each 750.00
681 0277 P.V. C automatic flushing cistern with fittings 15 litrs Each 810.00
XXIII
MATERIAL COMPONENTS
XXIV
MATERIAL COMPONENTS
XXV
MATERIAL COMPONENTS
XXVI
MATERIAL COMPONENTS
XXVII
MATERIAL COMPONENTS
XXVIII
MATERIAL COMPONENTS
XXIX
MATERIAL COMPONENTS
XXX
MATERIAL COMPONENTS
XXXI
MATERIAL COMPONENTS
XXXIII
MATERIAL COMPONENTS
XXXIV
MATERIAL COMPONENTS
XXXV
Rates for lSI marked Soil Fittings & Fixtures as per lSI Standards
XXXVI
Rates for lSI marked Soil Fittings & Fixtures as per lSI Standards
ITEM Rate ITEM Rate
Connectors (4" X 6") 226.00 Passover (4" X 6") 761 .00
Connectors (4" X 9") 268.00 Passover (4" X 4") 664.00
Connectors (4"x12") 406.00 Passover (2" X 6") 514.00
Extn . Pc One Way (4" X 12") 536.00 Passover (2" X 4") 423.00
Rates for lSI marked Soil Fittings & Fixtures as per lSI Standards
ITEM 6" X4" 6" X3" 4" X3" 4" X2" 3" X2"
Plain Junction 1021.00 984.00 441.00 351 .00 293.00
Door Junction 1072.00 1024.00 518.00 439.00 423.00
Double Plain Junction 1174.00 1102.00 652.00 636.00 -
Double Door Junction 1286.00 1196.00 734.00 714.00 -
Plain Y Junction 974.00 - 413.00 344.00 -
Door Y Junction 1026.00 - 518.00 499.00 -
Double Plain Y Junction 1527.00 1486.00 593.00 583.00 -
Double Door Y Junction 1606.00 1536.00 626.00 616.00 -
Reducer 362.00 347.00 277.00 262.00 239.00
Horn Plain Bend - - - 387.00 -
Horn Door Bend - - - 429.00 -
Anty Syphone - - - 592.00 -
Double Anty Syphone - - - 751 .00 -
Belmouth Trap - - 427.00 427.00 -
Inverted Junction - - - 631 .00 -
NAHANI TRAP -lSI Standards
ITEM Weight Kgs. Rate ITEM Weight Kgs. Rate
4" X3" 6.00 372.00 4" x4" 4.40 290.00
4" X3" 4.00 263.00 4" x4" 3.80 251.00
4" X3" 3.20 210.00 4" X 2" 5.50 363.00
4" X 3" 2.60 168.00 4" X 2" 3.00 199.00
4" X 3" 2.00 131 .00 4" X 2" 2.20 145.00
4" X 3" DDA 5.50 363.00 4" X 2" 1.80 119.00
4" X 3" CPWD 5.00 331 .00 4" X 3" X 12" Long 5.50 363.00
4" X 3" CPWD 4.20 277.00 4" X 2" X 12" Long 4.00 263.00
XXXVII
MANHOLE COVERS SMART COVERS ROUND COVERS
"lSI MARKED" "lSI MARKED"
SIZE WT. (KG.) RATE SIZE WT. (KG.) RATE SIZE WT. (KG.) RATE
6"X 6" 3.50 185.00 8" X8" 2.00 110.00 16" X 2" 6.00 330.00
8"X 8" 4.00 208.00 9" X9" 2.80 154.00 18" X 2" 7.00 376.00
10 X 10" 5.00 251 .00 10" X 10" 3.50 192.00 18" X 2" 13.50 679.00
12" X 12" 7.00 376.00 12" X 12" 5.20 286.00 18" X 4" 11 .50 632.00
12" X 12" 15.00 754.00 14" X 14" 7.50 413.00 20" X 2" 10.00 520.00
14" X 14" 9.00 487.00 15" X 15" 8.00 440.00 20" X 2" 13.00 676.00
15" X 15" 12.00 579.00 16" X 16" 9.50 523.00 20" X 2" 16.00 808.00
16" X 16" 14.00 680.00 18" X 18" 16.00 879.00 20" X 2" 20.00 1006.00
18" X 18" 16.00 807.00 20" X 20" 14.00 770.00 20" X 2" 30.00 1521.00
18" X 18" 25.00 1242.00 22" X 22" 18.00 989.00 20" X2" 40.00 2006.00
18" X 24" 25.00 1242.00 24" X 24" 23.00 1263.00 20" X 3" 50.00 2502.00
18" X 24" 38.00 1901 .00 24" X 3" 75.00 4056.00
SUPER COVERS
18" X 24" 50.00 1502.00 SIZE WT. (KG.} RATE OUTER SIZE COVERS
18" X 24" 75.00 3696.00 8" X8" 3.50 192.00 SIZE WT. (KG.) RATE
20" X 20" 22.00 1109.00 10" X 10" 4.50 248.00 9" X 12" 2.50 138.00
22" X 22" 25.00 1242.00 12" X 12" 6.50 357.00 9" X1 2" 3.50 190.00
24" X 24" 32.00 1616.00 15" X 15" 9.50 523.00 16" X 22" 10.00 498.00
24" X 24" 50.00 2502.00 18" X 18" 12.50 688.00 16" X 22" 13.00 648.00
24" X 24" 100.00 5009.00 18" X 24" 19.00 1044.00 18" X 12" 6.20 340.00
18" X 36" 50.00 2502.00 20" X 20" 17.00 935.00 18" X 18" 11.20 616.00
18" X36" 75.00 3696.00 22" X 22" 20.00 1099.00 18" X 24" 12.00 661.00
18"X36" 100.00 5009.00 SQUARE TANK COVERS 18" X 24" 15.00 762.00
18"X36" 125.00 6261 .00 SIZE WT. (KG.} RATE JALLYWITH FRAME
24" X 36" 95.00 4808.00 18" X 18" 12.50 758.00
SIZE WT. (KG.) RATE
24" X 36" 125.00 6261 .00 22" X 22" 18.00 1091.00
24" X 36" 245.00 12372.00 24" X 24" 21 .00 1273.00 6" X 6" 3.50 199.00
DOUBLE SEAL COVERS ROUND TANK COVERS 7" X 7" 4.50 257.00
"lSI MARKED" SIZE WT. (KG.) RATE 8" X8" 5.50 314.00
SIZE WT. (KG.) RATE 18" 7.50 455.00 9" X9" 6.50 371 .00
12" X 12" 28.00 1451.00 20" 10.00 605.00 10" X 10" 7.50 428.00
12" X 12" 50.00 2502.00 22" 12.00 730.00 12" X 12" 10.00 571.00
18" X 18" 19.50 1008.00 24" 13.00 795.00 15" X 12" 47.00 2679.00
18" X 18" 25.00 1242.00 28" 23.00 1410.00 16" X 14" 58.00 3306.00
18" X 18" 38.00 1901.00 ROUND JALLY 18" X 18" 26.00 1482.00
18" X 18" 45.00 2296.00 SIZE RATE 18" X 18" 67.00 3820.00
18" X 24" 38.00 1901.00 4" 18.00 24" X 24" 80.00 4561 .00
24" X 24" 38.00 1901.00 5" 29.00 24" X 24" 115.00 6556.00
24" X 24" 50.00 2502.00 6" 40.00 SQUARE FRAME &ROUND COVER
24" X 24" 60.00 2970.00 8" 67.00 "lSI MARKED"
24" X 24 "75.00 3696.00 SQUARE JALLY SIZE WT. (KG.) RATE
24" X 24" 115.00 5779.00 SIZE RATE 500mm Dia 100.00 5009.00
24" X 24" 150.00 7515.00 4" X4" 22.00 500mm Dia 116.00 5830.00
24" X 24" L10.00 10605.00 5" X 5" 29.00 560mm Dia 116.00 5830.00
FOOT STEPS 6" X6" 41 .00 560mm Dia 128.00 6432.00
SIZE RATE 8" X 8" 92.00 560mm Dia 208.00 10496.00
9" X 9" 114.00 600mm Dia 90.00 4593.00
6" X 10" Light 131.00
10" X 10" 131 .00 All Weights are approximate
15" X 14" Heavy 277.00
12" X 12" 158.00
XXXVIII
G.l. PIPE FITTINGS -lSI Standards
15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm
Items
1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 4"
ELBOW 12.45 17.80 34.10 51 .30 72.20 111 .80 187.10 286.50 498.00
TEE 19.80 34.10 46.40 72.20 100.30 169.00 255.00 349.50 668.00
SOCKET 12.10 17.80 25.50 37.55 53.30 84.80 145.65 199.40 338.00
UNION 37.80 54.45 77.90 118.00 147.80 223.70 440.70 592.50 835.50
NIPPLE 12.10 21.00 32.10 53.60 69.40 104.30 173.00 250.00 330.00
CROSS 34.70 49.30 78.00 130.00 169.00 253.00 427.00 546.00 830.00
3-WAY 28.40 44 .70 62.50 88.25 245.00 375.00 -- -- --
R-ELBOW -- 22.10 41 .00 60.20 82.00 122.00 220.00 323.00 552.00
R-TEE -- 37.60 54.00 80.30 114.00 184.00 278.00 389.00 756.00
R-SOCKET -- 20.10 28.10 43.20 60.20 92.80 156.00 2 13.00 368.00
SHORTBEND 20.00 39.00 52.15 96.25 146.00 219.00 -- -- --
TAN KNIPPLE 32.40 44.70 71 .00 124.50 168.00 190.00 -- -- --
CHECKNUT 10.10 20.20 25.20 30.40 39.00 57.00 -- -- --
C.I.PLUG 5.70 8.80 14.60 20.00 26.00 32.00 52.00 88.00 --
C.I.CAPPLUG 9.20 13.80 19.00 21 .00 32.70 40.00 56.00 94 .00 161 .00
HOSECOLLER 14.70 26.30 32.70 44.90 54.00 103.00 -- -- --
STEELNIPPLE 16.00 23.60 46.00 126.00 164.00 41 7.00 - - -- --
STEELPLUG 13.20 2 1.60 45.00 103.00 126.00 189.00 -- -- --
STEELBUSH 16.70 22.80 49.00 108.00 135.00 205.00 -- -- --
STEEL-R-NIPPLE -- 25.20 37.00 60.70 81 .30 117.00 -- -- --
Pricelist for Ductile iron manhole covers, frames & gratings as per EN 124 Standard
Square cover Rectangular Cover Circular Cover with Grating with frame
with frame with frame (Hinged) square frame (Hinged) (Hinged)
Size Weight Rate Size Weight Rate Size Weight Rate Size Weight Rate
MM Kg. Rs/No. MM Kg. Rs/No. MM Kg. Rs/No. MM Kg. Rs/No.
300x300 8 653 450x600 30 2450 350 DIA 22 1797 300x300 12 980
300x300 33 2694 450x600 70 5715 450 DIA 55 4491 450x450 32 2612
300x300 40 3226 450x600 100 8165 500 DIA 25 2041 400x500 58 4736
450x450 22 1797 450x900 50 4082 500 DIA 45 3674 450x600 38 3103
450x450 45 3674 450x900 75 6124 500 DIA 65 5307 450x450 56 4573
450x900 160 13064 450x900 125 10206 525 DIA 33 2694 550x550 85 6941
600x600 40 3266 600x900 65 5307 525 DIA 50 4082 500x600 80 6532
600x600 65 5307 600x900 105 8573 525 DIA 75 61242 600x600 70 5715
600x600 90 7348 600x900 150 12247 560 DIA 38 3103 600x600 90 7348
600x600 105 8573 RECESS COVER 560 DIA 55 4491 700x525 70 571 5
750x750 125 10206 450x450 35 2858 560 DIA 80 6352 700x525 90 7348
750x750 165 13472 450x450 42 3429 600 DIA 42 3429 750X750 130 10614
800X800 115 9389 600x600 45 3674 600 DIA 60 4899 800x800 135 11023
800X800 140 11430 600x600 65 5307 600 DIA 85 6941 800x800 180 14697
900x900 125 10206 600 DIA 100 8165
900x900 170 13880
560x560 90 7348
900x900 195 15921
Tolerance of Weight : 5%, Categories/Load taking : Light Duty -1.5MT, Medium Duty -12.5MT, Heavy Duty-25MT
XXXIX
REFILL PRICE LIST- FIRE FIGHTING EQUIPMENTS
Sr Code Product Base Price Sr Code Product Base Price
No Products Per Unit (Rs) No Products Per Unit (Rs)
xxxx
Rate list of materials (Submersible Three phase) for SR of 2016-17
51. Code Item Stage Basic Total rate Rate Suggested
Brand Taxes
No. No. Unit Rate for 2016 -17
1 2 3 4 5 6 7 8 9
1 3HP/2 .2KW 8 1 ATALANTA, SUGUNA, C.R.I , 24000.00 5.50% 25320.00 25320.00
KIRLOSKAR and Other
Equivalent Pumps
XXXXI
Rate list of materials (Submersible Three phase) for SR of 2016-17
Sl. Code Item Stage Basic Total rate Rate Suggested
Brand Taxes
No. No. Unit Rate for 2016 -17
1 2 3 4 5 6 7 8 9
17 7.5HP/5 .5KW 16 1 ATALANTA, SUGUNA, C.R.I, 43500.00 5.50% 45892.50 45800.00
KIRLOSKAR and Other
Equivalent Pumps
18 10.0HP/7 .5KW 8 1 ATALANTA, SUGUNA, C.R.I , 40500.00 5.50% 42727.50 42700.00
KIRLOSKAR and Other
Equivalent Pumps
19 10.0HP/7.5KW 10 1 ATALANTA, SUGUNA, C.R.I, 41500.00 5.50% 43782.50 43700.00
KIRLOSKAR and Other
Equivalent Pumps
20 10.0HP/7.5KW 16 1 ATALANTA, SUGUNA, C.R.I , 42500.00 5.50% 44837.50 44800.00
KIRLOSKAR and Other
Equivalent Pumps
21 10.0HP/7 .5KW 20 1 ATALANTA, SUGUNA, C.R.I , 47500.00 5.50% 50112.50 50100.00
KIRLOSKAR and Other
Equivalent Pumps
22 12.5HP/9.3KW 16 1 ATALANTA, SUGUNA, C.R.I, 50500.00 5.50% 53277.50 54300.00
KIRLOSKAR and Other
Equivalent Pumps
23 12.5HP/9.3KW 20 1 ATALANTA, SUGUNA, C.R.I, 53300.00 5.50% 56231.50 56200.00
KIRLOSKAR and Other
Equivalent Pumps
24 12.5HP/9.3KW 25 1 ATALANTA, SUGUNA, C.R.I , 57300.00 5.50% 60451.50 60400.00
KIRLOSKAR and Other
Equivalent Pumps
25 12.5HP/9.3KW 10 1 ATALANTA, SUGUNA, C.R.I, 55300.00 5.50% 58341.50 58000.00
KIRLOSKAR and Other
Equivalent Pumps
26 12.5HP/9.3KW 12 1 ATALANTA, SUGUNA, C.R.I, 55300.00 5.50% 58341.50 25300.00
KIRLOSKAR and Other
Equivalent Pumps
27 12.5HP/9.3KW 24 1 ATALANTA, SUGUNA, C.R.I, 60100.00 5.50% 63405.50 63400.00
KIRLOSKAR and Other
Equivalent Pumps
28 15.0HP/11KW 16 1 ATALANTA, SUGUNA, C.R.I, 59500.00 5.50% 62772.50 62700.00
KIRLOSKAR and Other
Equivalent Pumps
29 15.0HP/11 KW 20 1 ATALANTA, SUGUNA, C.R.I, 56300.00 5.50% 59396.50 59300.00
KIRLOSKAR and Other
Equivalent Pumps
30 15.0HP/11 KW 25 1 ATALANTA, SUGUNA, C.R.I, 62000.00 5.50% 65410.00 65400.00
KIRLOSKAR and Other
Equivalent Pumps
31 15.0HP/11 KW 15 1 ATALANTA, SUGUNA, C.R.I, 57500.00 5.50% 60662.50 60600.00
KIRLOSKAR and Other
Equivalent Pumps
32 15.0HP/11 KW 28 1 ATALANTA, SUGUNA, C.R.I, 66000.00 5.50% 69630.00 69300.00
KIRLOSKAR and Other
Equivalent Pumps
XXXXII
Rate list of materials (Submersible Three phase) for SR of 2016-17
Sl. Code Item Stage Basic Total rate Rate Suggested
Brand Taxes
No. No. Unit Rate for 2016 -17
1 2 3 4 5 6 7 8 9
33 15.0HP/ 11KW 30 1 ATALANTA, SUGUNA, C.R.I , 67000.00 5.50% 70685.00 70600.00
KIRLOSKAR and Other
Equivalent Pumps
34 17.5HP / 13KW 30 1 ATALANTA, SUGUNA, C.R.I, 70500.00 5.50% 74377.50 74300.00
KIRLOSKAR and Other
Equivalent Pumps
35 17.5HP /13KW 29 1 ATALANTA, SUGUNA, C.R.I , 70000.00 5.50% 73850.00 73800.00
KIRLOSKAR and Other
Equivalent Pumps
36 20HP/ 15KW 20 1 ATALANTA, SUGUNA, C.R.I, 69500.00 5.50% 73322.50 73300.00
KIRLOSKAR and Other
Equivalent Pumps
37 20HP/ 15KW 30 1 ATALANTA, SUGUNA, C.R.I , 75000.00 5.50% 79125.00 79100.00
KIRLOSKAR and Other
Equivalent Pumps
38 20HP/ 15KW 16 1 ATALANTA, SUGUNA, C.R.I , 62300.00 5.50% 65726.50 65700.00
KIRLOSKAR and Other
Equivalent Pumps
XXXXIII
Rate list of materials (Submersible Single Phase) for SR of 2016-17
51. Code Hems Stage Unit Brand Basic Taxes Total Ratesug-
No. No Rate rate gestedfor
2016-17
1 2 3 4 5 6 7 8 9 10
1 1 . 0HP/75KW 10 1 ATALANTA I SUGUNA I CRI I 12000.00 5.50% 12660.00 12600.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
2 1 . 0HP/75KW 12 1 ATALANTA/ SUGUNA/ CRI I 15000.00 5.50% 15825.00 15800.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
3 1.0HP/75KW 15 1 ATALANTA/ SUGUNA/ CRI I 14900.00 5.50% 15719.50 15700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
4 1 .0HP/75KW 21 1 ATALANTA/ SUGUNA/ CRI I 16800.00 5.50% 17724.00 17700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
5 1.5HP/1.1KW 10 1 ATALANTA/ SUGUNA/ CRI I 14900.00 5.50% 15719.50 15700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
6 1.5HP/1.1 KW 12 1 ATALANTA I SUGUNA I CRI I 14000.00 5.50% 14770.00 14700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
7 1 .5HP/1 . 1 KW 15 1 ATALANTA/ SUGUNA/ CRI I 16000.00 5.50% 16880.00 16800.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
8 1.5HP/1.1 KW 18 1 ATALANTA/ SUGUNA/ CRI/ 15500.00 5.50% 16352.50 16300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
9 1 . 5HP/1.1 KW 21 1 ATALANTA / SUGUNA/ CRI I 18000.00 5.50% 18990.00 18900.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
10 1 .5HP/1.1 KW 25 1 ATALANTA / SUGUNA/ CRI/ 18500.00 5.50% 19517.50 19500.00
KIRLOSKAR/ OTHER EQUIVALENT PUMPS
11 1.5HP/1.1 KW 30 1 ATALANTA/ SUGUNA/ CRI/ 19500.00 5.50% 20572.50 20500.00
KIRLOSKAR / OTHER EQUIVALENT PUMPS
12 2.0HP/1 . 5KW 12 1 ATALANTA I SUGUNA I CRI I 15500.00 5.50% 16352.50 16300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
13 2.0HP/1 .5KW 16 1 ATALANTA / SUGUNA/ CRI I 17000.00 5.50% 17935.00 17900.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
14 2.0HP/1.5KW 20 1 ATALANTA/ SUGUNA/ CRI I 18000.00 5.50% 18990.00 18900.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
15 2.0HP/1.5KW 25 1 ATALANTA I SUGUNA I CRI I 19000.00 5.50% 20045.00 20000.00
KIRLOSKAR / OTHER EQUIVALENT PUMPS
16 2 .0HP/1.5KW 30 1 ATALANTA I SUGUNA I CRI I 19500.00 5.50% 20572.50 20500.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
17 2.0HP/1.5KW 40 1 ATALANTA I SUGUNA I CRI I 25000.00 5.50% 26375.00 26300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
XXXXIV
Rate list of materials {MONOBLOCK TYPE-MB SERIES THREE PHASE) for SR of 2016-17
51. Code Items Stage Unit Brand Basic Taxes Total rate Rate
No. No Rate suggested
2016-17
1 2 3 4 5 6 7 8 9 10
1 1/ 0 .7 5 10 1 ATALANTA I SUGUNA I CRI I 8550.00 5.50% 9020.25 9000.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
2 1.5/1. 1 12 1 ATALANTA I SUGUNA I CRI I 10300.00 5.50% 10866.50 10800.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
3 2 /1 .5 15 1 ATALANTA I SUGUNA I CRI I 12500.00 5.50% 13187.50 13100.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
4 3/ 2 .2 21 1 ATALANTA/ SUGUNA / CRI I 16000.00 5.50% 16880.00 16800.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
5 5/ 3 .7 10 1 ATALANTA I SUGUNA I CRI I 19000.00 5.50% 20045.00 20000.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
6 7.5/ 5.5 12 1 ATALANTA I SUGUNA I CRI I 24000.00 5.50% 25320.00 25300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
7 10/7. 5 15 1 ATALANTA / SUGUNA / CRI I 32000.00 5.50% 33760.00 33700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
8 12 .5/9 .3 18 1 ATALANTA/ SUGUNA / CRI I 34500.00 5.50% 36397.50 36300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
9 1 5/11 21 1 ATALANTA/ SUGUNA / CRI I 38500.00 5.50% 40617.50 40600.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
10 2 0/ 15 25 1 ATALANTA I SUGUNA I CRI I 50500.00 5.50% 53277.50 53200 .00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
11 25/18.5 30 1 ATALANTA/ SUGUNA / CRI I 65000.00 5.50% 68575.00 68500.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
12 30/22 12 1 ATALANTA I SUGUNA I CRI I 98000.00 5.50% 103390.00 103300.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
Rate list of materials (MONOBLOCK TYPE-MB SERIES SINGLE PHASE) for SR of 2016-17
51. Code Items Stage Unit Brand Basic Taxes Total rate Rate
No. No Rate suggested
2016-17
1 2 3 4 5 6 7 8 9 10
1 3/2 .2 1 ATALANTA/ SUGUNA / CRI I 20000.00 5.50% 21100.00 21100.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
2 5/3 .7 1 ATALANTA I SUGUNA I CRI I 22500.00 5.50% 23737.50 23700.00
KIRLOSKAR I OTHER EQUIVALENT PUMPS
xxxxv
HIRE CHARGES COMPONENTS
13 1015 Hire charges for Tractor mounted or mini dozer Day 2,400.00
18 1022 Hydraulic Control Paver finisher (with Electronic Sensor) 100 TPH Day 18,560.00
XXXXVI
HIRE CHARGES COMPONENTS
26 1036 Front end loader (1Cum) Turnover 120 Cum /day when hr 700.00
used with hot mix plant
36 1047 Paver Finisher Hydrostatic with sensor control 100 TPH hr 2,320.00
X:XXXVII
HIRE CHARGES COMPONENTS
Sl. Code Hire Charges Component Name Unit Rate
No. No. Rs. Ps.
57 1078 HOM of pilling rig with Bentonite pump, etc. Day 37,960.00
68 1089 HOM of 7.5 eft capacity concrete mixing machine Day 1,440.00
XXXXVIII
HIRE CHARGES COMPONENTS
XXXXIX
HIRE CHARGES COMPONENTS
97 1326 Integrated stone crusher of 200 TPH including belt conveyor hr 13,150.00
vibrating screens
103 1515 Hire charges for jack of 40 tonne lifting capacity No. 3,300.00
106 1528 Cement concrete batch mix at 175 cum/hor (effective output) hr. 7,904.00
110 1535 Batch type cold mixing plant 100 - 120 TPH capacity hr 8,000.00
producing an average output of 75 tonne per hour
114 0965 Transit mixer 4 cum capacity for lead beyond 1 km t.km 2.00
115 0970 Usage of plant & equipment for pneumatic method of hr 400.00
well sinking
116 0996 Air Compressor 250 cfm with pneumatic breaker/ jack hammer hr 257.00
along with accessories
117 0999 Compressor with guniting equipment along with accessories hr 275.00
L
iSMl~~iS ~~~0
(~~M~~~~f\. ~od~ ~~ ~~Ml~ Z;;:j~;m,Crl ~~.ro)
.../)
(zo~;!j6'~-9001-2008) Ceritified.
~oe5 5 ~~cmo~d~. ~e~o&..&::~:ml~. ~orle,;(Jal~ ~,~. ~oi'l~,Ja)~ d~d 5e;ec ~~~~rl~~
~ ~.../)
2016-17c:3e ;!J'Ue:lc:3~ ilor\~m c:3e)~d t)c:3r\..r.le:l ~5dd ddr\~c:3:>J_ t)~o5 01.04.2016 eod
~e/1 2Jruc:3o3 c::>e~e~c:3 wA
1. Directorate ofEconomics and Statistics, M.S.Building, Bangalore dc:3d c::>~ ~o.
DEN:01: PWX :2008 t)~o5 10.02.2009.
2. ~ 5e..5ee ede~ ~o. ee:iloc:3e):t)c:3r\..r.le:l:dc::l:2007-08 t): 23.04.2007.
3. ffi:l<W:>F5 ~~~ ~~ee3 c::>~ ~o. ffi:l~:173:<Wd'<Wo(j~:06 t):30.04.2007.
4. ~ffi:lFdd c::l~d ~o.~(j~~ : 46 : eif~<Wo:;:f 2008 t): 24.05.2008
5. ~~6 ~oz:3c:Jcxbif dc:3d c::l~ ~O.M~<W;if 201~<W;if<WO:t)~r:k04-05 t):23.01.2008.
6. ffi:l<W:>F5 eafu~dc;3d c::)~ ~0. ,wo(j~,w:~3d:F.Jeif -17:2008-09 t):07.06.2008.
7. ede~ ~o. e::Je::J:iloc:3e):t)c:3r\..r.le:l:ddc::l~ : 2008-09 t)~o5 16-08-2008
8. ede~ ~o. e::Je:iloc:3e):t)c:3r\..r.le:l:ddc::l~ : 2009-10:923 t)~o5 10-06-2009.
9. ede~ ~o. e::Je:iloc:3e):t)c:3r\..r.le:l:ddc::l~ : 2010-11:335 t)~o5 21-04-2010
10. ede~ ~o. e::Je::J:iloc:3e):t)c:3r\..r.le:l:ddc::l~ : 2011-12:95 t)~o5 15-04-2011
11. z::>OW c:Jdn~5m e::Jt;,)F5 c;3:)~ ;!JUO£l65 c:Jdn~~e)(Xb dc:3d c::l~ ~0. ;!JUO(:J:01:il5o~:2012
t): 06-02-2012.
12. ede~ ~o. e::Je::J:iloc:3e):t)c:3r\..r.le:l:ddc::l~:2012-13 t)~o5 23-04-2012
13. z::>oW c:Jdn~ 5m et;,)F5 c;3:)~ ;!JUO£l65 c:Jdn~~e,)cm dc:3d c::>~
~O.t5;!JUO(:J:01:il5o~:2013 t): 19-02-2013.
14. ede~ ~o. e::Je:iloc:3e):t)c:3r\..r.le:l:ddc::l~:2013-14 t)~o5 25-04-2013
15. z::>OW c:Jdn~5m et;,)F5 c;3:)~ ;!JUO£l65 c:Jdn~c:;me)(Xb dc:3d c::l~ ~O:t5;!JUO(:J:01:il5o~:2014
t)~o5 14-02-2014
16. ede~ ~o. e::Je::J:iloc:3e):t)c:3r\..r.le:l:ddc::l~:2014-15:281 t)~o5 25-04-2014
17. c:Jdn~ 5m et;,)F5 c;3:)~ ;!JUO£l65 c:Jdn~~e,)cm dc:3d c::>~ ~o:e;!JUoc:J:01:il5o~:2015
t):02-02-2015.
18. ede~ ~o. e::Je:iloc:3e):t)c:3r\..r.le:l:ddc::l~:2015-16: t)~o5 24-04-2015.
19. c:Jdn~5m et;,)F5 c;3:)~ ;!JUO£l65 c:Jdn~~e,)cm dc:3d c::>~ ~o:e;!JUoc:J:ilo5o~: 01:2016
t):09-02-2016.
****
~~~=
lf0~e~-4d ~ffi:lFdd c::>~d~ t)~o5 dod:l ~~6 ffi:lcxbFd~Fr\~ e::JQJ.3cm~ c:3(jd
04.04.2008
c:3~c:3~cmc:3:>J_ e)r\~F.J ~eMec::>oi;.,er\ ~~~em ddc::>~~~ t)c:3r\..r.le:l ~5del1 5c:J~ t)c:3r\..r.le:l ddc:3c:3:>J_ c:Jr\t.J
c::>~~c:3 2-J/1 '8~5o(jo3 e::Jde~ c:Je~ m~d.
n .../)
1. Public work, Ports & Inland Water Transport Department should direct all the Superintending Engineers
who are competent to approve the S.Rs. to follow the Notification issued by the Labour Department in
respect of Labour Component of the S.Rs. with effect from 2008-09.
2. All departments of the Government should follow the Notification issued from time to time by the Labour
Department with regard to Minimum Wages currently for payment to the Daily Wage Employees. Wherever
Daily wages being paid are higher than those notified by the Labour Department the rates will be frozen till
the increases are neutralized by CPI through periodic notifications of Labour Department.
LI
~ddo3 uuc::DF5 ~~~ ~t;l~z.5c:3 ~o.=ou~:95:<Wd'<Wo<2~:2008 2:3orl~d:l tl~o5: 25-01-20lld ~=oud
05ilM uuc::DF5 ~~~em m~e~ ero~e~-3 do3 c;::b~ 5wg 5e,3ea c:D~ ero~e~-5 do3 tl~o5 01.04.2016
aod 31.03.2017 dcjdn ~~@mcjo3 ~a55 2:3~ ~~6o5d~ o5~d:lcj ~-B ~o~~ ~-B tlc3~ 4 c:Je.\;:3 (~9 c:Je.\;:3)
~~ 2;536em~J. 5~5o<2o3 ~~ 05il5~l1d:
~u:Riu~ 2593
~t;l~z.5c:3 ~o. =ou~:95:<Wd'<Wo<2~:2008 2:3orl~d:l tl~o5:25.01.2011 do3 ~e) dd 05ilM ~~2;536 ;:3eaN
tlc3MO ddri~~J. ero<:::JUa:ld~n 5~5o<2o3 c:Jrlt;l ii!3~~2:3e=oul1d:l~d.
~M~otl: 26-04-2016.
~cjc;3em~ ~<25o;rul1d:lcj ~o~ri~~J. c:Darlrc)N 2016-17c:3e ~Oc3 d!;)e~ec:Doir.lel1 ~~~ cje.\~d tlc3MO
ddri~~J. (~e) c;3e3c:3 c;::b~ ~ecjc:3 c:JcjFffi~ 2;536)do3 ddc:D~em~c3 ddc':J~ec:;t~rl~n ~~cj~mcj MO
~o~rl~n (Labour Component of the SR) 05ilM ~~~em~ tlc3MO e~dd~ c:JcjF&Jm~d:lcj ~5dan
~cj.Bmcj ~~o;rul1 ~~emo;rur()cjo3 tl~o5 01.04.2016 aod ~an 2Jd:lcjo3 c:Da~~PN ~~~edc:3 c:Je<2~ l1d.
LII
~~~~~ ~dd ~~f'~~FI ~~~d.
1. c;:b<:mle3e~c:m~x:5:l, 5c:JUFW5 £jo7i~ru 1 c;:b3:l 2
-"
2. ~~~ ffilo::bn::l~Fii~. dr.lei5J<lec:::lo.ir.JeFI ~e:m.il, c':)ffil~ ~Q. £jo7i~ru.
3. ffilo::bn::l~Fii~. dr.lei5J<lec:::lo.ir.JeFI ~e:m.il, c':)ffil~ ~Q. £jo7i~ru.
4. ffilo::bn::l~Fii~. 5c:JUFW5 ~ffilFd dr.le~ (Nmuc;:SD) £jo7i~ru.
5. ~,c;:SAmc::35 Ndn~5ru, 5ect~~.;:,a-, £jo7i~ru.
" c;:>
6. ~~6 o.ir.Je~c:JUt;)ffilD, 5~o:::1. £jo7i~ru.
7. eo::b:l~ru. 3N~ c':)~li. c':)~~~Q £jo7i~ru .;:,;!:t~(~o~5)£jo7i~ru
8. ~~6 ~O~CJo::bO:l, ~oc:::l5F c;:b~ 5~~71~ (d) £jor(~Q:)
9. ~~6 ~o~No::bru, ~~ CJeO'()c;:SD, £jo7i~ru
10. ~~6 ~O~CJo::bct, l"@,~eFo!()~c;:SeJ~ c;:b~ c:::lot3()o::b3'"'0()23"' ~O~CJo::bDo7'1 ~e:m.il, £jo7i~ru
11. ~~6 ~O~CJo::bef, NeO()c;:SD (d~fB) ~elMO:l NeO()c;:SD (~~d) £j~71()0
12. ~~6 ~O~CJo::bct, O()~eo::D ok:r~p. £jo7i~ru
13. ~~' ~O~CJo::bct, ~e~ c':)~c::1' 5~e~c::1'. £jo7i~ru
" eJ ,.,)
14. ~~6 ~O~No::bef, ffiec;:SJ()c;:S.; ~2:30:, M~ru. 3:Jc;:5:)5.J<lc):)
15. ~~6 ~O~CJo::bct, £jo7i~ru ~~c;:SeJ~ ~t;)ffild £jo7i~ru
16. ~~6 ~O~CJo::bct, £jo7i~ru ~lid ~2;3. £jo7i~ru
17. ~~6 ~O~No::bct, £jo7i~ru 7ieJa5 c;:bo~~. £jo7i~ru
18. ~~' ~O~CJo::bef, ~e)~Oc:::l(\)Jc)e) ~~~,t:l ~0~ e:5~0QO()c;:1' c::t3, £jor(~~Q:)
" e ~Q c;:> ~-"
19. ~~6 ~o~No::bct, £jo7i~ru Nero ~d2JO()~ c;:b~ z-A~do~ c;:bo~~. £jo7i~ru
20. ~~6 ffil~F~dfB ~t;)ffilD, 5ectect~.;:,. c:Jc;:SJ'()FfB ~c;:S~. £jo7i~ru
21. CJdn~5ru, ~d~~3 CJDFe~c:JUe)o::b, 9c$e c;:ba5~ c':)~p£do::D6 Me~d, £jo7i~ru
22. CJdn~5ru, 5.~.ect ..;:,;!:t. 5.ect. Amlid
23. ~~6 ~O~CJo::bct, £jo7i~ru c;:b<:ml~li.d c:m~5. £jo7i~ru
24. Project Director, e-govrenance Department, e-procurement Cell, No.141, M.S.Building,
Bangalore
2. ~t;)e55 ~~o::Do3dru, l"@,~eFo!()~~,t:l c;:b3:l c:::lot3()o::b3'"'0()23"' ~o~No::bDo7'1 ~,3, £jo7i~ru. c':)~e~ ~fB
""' ~ Q -" ~-" r<l
CJeO'()c;:SD c;:SeJ~ £jo7i~ru
3. ffilo::b F c:m e)5 ~o ~ CJo::bO:l, dr.le ~
4. ffilo::bFc:me)5 ~O~CJo::bef ~fBr<l CJeO'()c;:SD c':)~r(
5. ~ <:ml o::D 5 ffil o::D F c:m e) 5 ~ o ~ No::D ru dr.l ei5J<l ec:::l o.ir.J eFl ~ e:m .il
~'6:J/-
~t;)e55 ~~o::Do3dru,
dr.l ei5J<l ec:::l""'o.ir.J eFl, 2.. 1 o d ru c;:b 3:l
-"
z...., ~c:JU~ ~e) AmD 1i ~ e:m .il
£jo7i~ru c;:SeJ~' £jo7i~ru
LIII
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LIV
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LV
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LVI
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LVII
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LVIII
STATEMENT SHOWING THE LABOUR RATES,
PW,P & IWTD, SOUTH ZONE BANGALORE FOR THE YEAR 2016-17
ANNEXURE -I
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
LIX
BUILDINGS
MORTAR
Sl. No. Description Unit Rate
Rs. Ps.
1.0 MORTAR
1.1 KSRB 0.5-1.1 : Providing cement mortar of mix 1:1 (1 cement : cum 10,708.00
1 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No. KBS 0.5-1.2
1.2 KSRB 0.5-1.2 : -do- cement mortar of mix 1:2 cum 8,232.00
1.3 KSRB 0.5-1.3 : -do- cement mortar of mix 1:3 cum 6,996.00
1.4 KSRB 0.5-1.4 : -do- cement mortar of mix 1:4 cum 5,861.00
1.5 KSRB 0.5-1.5:- do- cement mortar of mix 1:5 cum 5,250.00
1.6 KSRB 0.5-1.6 :-do- cement mortar of mix 1:6 cum 4,727.00
1.7 KSRB 0.5-1.7:- do- cement mortar of mix 1:8 cum 4,203.00
1.8 KSRB 0.5-1.8:- do- cement mortar of mix 1:10 cum 3,854.00
1.9 KSRB 0.5-2.1 : Providing lime mortar of mix 1:1 (1 lime putty : cum 5,715.00
1 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.1
1.10 KSRB 0.5-2.2 : -do- lime mortar of mix 1:2 (1 lime putty : 2 sand) cum 5,020.00
1.11 KSRB 0.5-2.3 : -do- lime mortar of mix 1:3 (1 lime putty : 3 sand) cum 4,679.00
including cost of all materials, labour charges.
1.12 KSRB 0.5-3.1 : Providing lime surkhi mortar of mix 1:1 (1 lime putty cum 4,487.00
: 1 surkhi) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No. KBS
1.13 KSRB 0.5-3.2 : - do - lime surkhi mortar of mix 1:2 (1 lime putty : cum 3,383.00
2 surkhi)
1.14 KSRB 0.5-3.3 :-do- lime surkhi mortar of mix 1:3 (1 lime putty : cum 2,835.00
3 surkhi)
1.15 KSRB 0.5-4.1 : Providing lime surkhi sand mortar of mix 1:1:1 cum 4,143.00
(1 lime putty : 1 surkhi : 1 sand) including cost of all materials, labour
charges, HOM of machinery complete as per specifications.
Specification No. KBS
1.16 KSRB 0.5-4.2 : - do -lime surkhi sand mortar of mix 1:1:2 (1 lime putty cum 3,250.00
: 1 surkhi : 2 sand)
1.17 KSRB 0.5-5.1 : Providing cement mortar with stone dust/grit of mix 1:2 cum 7,196.00
(1 cement : 2 stone dust/grit) including cost of all materials, labour
charges, HOM of machinery complete as per specifications.
Specification No. KBS
2
51. No. Description Unit Rate
Rs. Ps.
1.18 KSRB 0.5-6.1: Providing cement lime mortar of mix 1:1:3 cum 7,848.00
(1 cement : 11ime putty:3 sand) including cost of all materials, labour
charges, HOM of machinery complete as per specifications.
Specification No. KBS 0.5-2.3
1.19 KSRB 0.5-6.2 : -do - cement lime mortar of mix 1:1 :4 (1 cement cum 7,260.00
11ime putty:4 sand)
1.20 KSRB 0.5-6.3 : -do- cement lime mortar of mix 1:1:5 (1 cement cum 6,862.00
11ime putty:5 sand)
1.21 KSRB 0.5-6.4 : -do- cement lime mortar of mix 1:1:6 (1 cement cum 6,130.00
11ime putty:6 sand)
1.22 KSRB 0.5-6.5 : -do -cement lime mortar of mix 1:1:7 (1 cement cum 5,728.00
11ime putty: 7 sand)
1.23 KSRB 0.5-6.6 : -do- cement lime mortar of mix 1:1:8 (1 cement cum 5,356.00
11ime putty: 8 sand)
1.24 KSRB 0.5-6.7 : -do- cement lime mortar of mix 1:2:9 (1 cement cum 5,702.00
21ime putty: 9 sand)
1.25 KSRB 0.5-6.8 :-do- cement lime mortar of mix 1:3:12 (1 cement cum 5,499.00
31ime putty: 12 sand)
1.26 KSRB 0.5-7.1 :Providing white cement mortar with marble dust of cum 16,183.00
mix 1 :2 (1 white cement : 2 marble dust) including cost of all materials,
labour charges, HOM of machinery complete as per specifications.
Specification No. KBS
1.27 KSRB 0.5-7.2 :-do- white cement mortar with marble dust of mix 1:3 cum 12,602.00
(1 white cement : 3 marble dust)
1.28 KSRB 0.5-7.3: - do- white cement mortar with marble dust of mix 1:4 cum 9,765.00
(1 white cement : 4 marble dust)
1.29 KSRB 0.5-7.4 :-do- white cement mortar with marble dust of mix 1 :5 cum 8,238.00
(1 white cement: 5 marble dust)
1.30 KSRB 0.5-8.1 :Providing fly ash sand mortar of mix 1:1.5:3 (1 cement cum 4,789.00
: 1.5 fly ash : 3 sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
Specification No. KBS 0.5-2.4
1.31 KSRB 0.5-8.2 : -do -fly ash sand mortar of mix 1:2:4 (1 cement : cum 4,004.00
2 fly ash : 4 sand)
1.32 KSRB 0.5-8.3 :-do- fly ash sand mortar of mix 1:2.5:5 (1 cement: cum 3,568.00
2.5 fly ash : 5 sand)
1.33 KSRB 0.5-8.4 :-do- fly ash sand mortar of mix 1:3:6.5 (1 cement: cum 3,219.00
3 fly ash : 6.5 sand)
1.34 Mud Mortar cum 230.00
3
EARTHWORK FOR BUILDINGS
4
51. No. Description Unit Rate
Rs. Ps.
2.1 KSRB 2-1.1 : Earthwork in surface excavation in ordinary soil for cum 157.00
leveling and lowering the ground manually (Other than foundation of
buildings, culverts, road drains and trenches of pipe lines and cables)
and removing the excavated stuff to a distance not exceeding 50m and
lift up to 1.5m, excavated surface levelled and neatly dressed , disposed
earth to be levelled including breaking of clods and neatly dressed as
per specifications.
specification. No. KBS 2.1 (a) I 2.3.1
2.2 KSRB 2-1 .2: - do - Hard soil cum 220.00
Note: Adopt item 2.24 for excavation in all types of soils for lowering
& levelling the ground for building works by mechanical means
2.3 KSRB 2-2.1 : Earthwork excavation by manual means for foundation cum 189.00
of buildings, culverts, water supply and sanitary lines and electrical
conduits etc, either in pits or in trenches 1.5m and above in width, in
ordinary soil not exceeding 1.5 m. in depth including dressing the bottom
and sides of pits and trenches, stacking the excavated soil clear from
edges of excavation with lead upto 50 m. including breaking of clods
complete as per specifications. No. KBS 2.1 (a) I 2.3.5
2.4 KSRB 2-2.2 : --do-- in hard soil. No. KBS 2.1 (b) I 2.3.5 cum 283.00
2.5 KSRB 2-2.3 : Excavation by manual means for foundation of buildings, cum 506.00
water supply & sanitary lines and electrical conduits etc., either in pits
or in trenches 1.50m and above in width, in soft rock not exceeding
1.50mtrs in depth including stacking the excavated stuff clear from
edges of excavation with lead upto 50mt including cost of explosives,
labour, HOM of equipment complete as per specifications.
specification. No. KBS 2.1Cl2.9.412.1812.19
2.6 KSRB 2-2.4 : -do- in soft rock without blasting cum 883.00
2.7 KSRB 2-2.5 : Excavation by manual means for foundation of buildings, cum 513.00
water supply & sanitary lines and electrical conduits etc., either in pits
or in trenches 1.50m & above in width in hard rock not exceeding
1.50m in depth including stacking the excavated stuff clear from edges
of excavation with lead upto 50m including cost of explosives, labour
HOM of equipment complete as per specifications
specification. No. KBS 2.1.dl2.3.412.1812.19
2.8 KSRB 2.2.6 : Excavation for foundation of buildings, water supply & cum 1,266.00
sanitary lines & electrical conduits etc. , either in pits or in trenches
1.50m & above in width in hard rock by chiselling and I or wedging where
blasting is prohibited, not excluding 1.50m in depth including stacking
the excavated stuff clear from edges of excavation with lead upto 50m
including cost of explosives, labour HOM of equipment complete as per
specifications
2.9 KSRB 2.2.7: Benching hard rock 5 to 7.5 em depth. for seating of Sqm 1,352.00
foundation, including cost of all labours, tools etc., complete as per
specifications.
specification. No. KBS 2.1(a) I 2.3.1
5
Sl. No. Description Unit Rate
Rs. Ps.
2.10 KSRB 2.3 : Filling available excavated earth (excluding rock) in sides cum 127.00
of foundations upto plinth in layers not exceeding 20 ems. in depth,
compacting each deposited layer by ramming after watering with lead
upto 50 m. and lift upto 1.5 m. including cost of all labour complete as
per specifications. Specification. No. KBS 2.9
2.11 KSRB 2-4 : Refilling available earth around pipe lines, cables in layers cum 76.00
not exceeding 20cms in depth, compacting each deposited layer by
ramming after watering with lead upto 50m. and lift upto 1.5 m. including
cost of all labour complete as per specifications.
2.12 KSRB 2.5 : Earthwork excavation in all soil deposits and filling cum 254.00
sides of foundation upto plinth in layers not exceeding 20cms. in depth,
compacting each deposited layer by ramming after watering with all
lead and lift including cost of all labour complete as per specifications.
specification. No. KBS 2.9.9 I 2.9.10.1 I 2.1 .1
2.13 KSRB 2.6 : Providing and filling sand in foundation upto plinth to cum 2,135.00
required depth for sub soil treatment including watering ramming with
all lead and lift complete as per specifications.
specification. No. KBS 2.10.2
2.14 KSRB 2.7 : Provid ing and removing shoring and strutting for Sqm 523.00
protecting the sides of foundation trenches, wherever required,
including cost of all materials and labour complete as per specifications.
specification. No. KBS 2.5 I 2.13
2.15 KSRB 2.8 : Providing and Filling in foundation with granite I trap cum 2,11 4.00
broken metal 1OOmm. and down size, with approved sand including
hand packing , ramming , watering, including cost of all materials and
labour with all lead and lift. complete as per specifications.
specification. No. KBS
2.16 KSRB 2.9 : Spreading and forming the excavated earth to required Sqm 6.00
level, slope for an average thickness of 75mm. in all classes of soils
including breaking clods and tamping manually alround the building and
low laying areas complete as per specifications.
2.17 KSRB 2.10 : Providing sand cement bed with 5% cement with all cum 3,101.00
leads for all materials and lift of 1.5 m. machine mixed, laid in layers of
15cms. thick and well compacted for foundation, including curing cost
of materials labour and HOM complete as per specifications.
2.18 KSRB 2.11 : - do- sand cement bed with 10% cement cum 3,732.00
2.19 KSRB 2.12 : Providing sand piles with all leads and lift of 1.5 m. for Sqm 216.00
stabilising foundation after duly making 5 ems. dia holes to a depth
of 1.2 to 1.5 m. at 0.5 m c to c and filling with sand and tamping
wherever required including cost of materials, labour complete as per
specifications.
6
51. No. Description Unit Rate
Rs. Ps.
2.20 KSRB 2.13:- do- sand and 10% cement Sqm 249.00
2.21 KSRB 2.14-1 : Extra for additional lift of 1.5m. or part thereof for cum 13.00
excavation In loose I soft or hard soil including cost of materials, labour
complete as per specifications.
specification. No. KBS
NOTE
KSRB 2.2
1. Excavation for foundation of buildings, water supply sanitary lines,
electrical conduits either in pits or in trenches where excavation width is
above 600 mm below 1.5 mtrs. depth add 25% extra and for width upto
600 mm add 50% extra for respective rates due to restricted conditions.
KSRB 2-2
2. Extra for excavation under water conditions and/or foul conditions
including bailing/pumping out, removing slush add 20% of the rate of
the respective rate on account of slow progress of work under these
7
ANTI TERMITE TREATMENT
8
Sl. No. Description Unit Rate
Rs. Ps.
3.2 KSRB-3.2: Providing and injecting chemical emulsion for Sqm 103.00
Pre-constructional Anti-Termite Treatment, creating continuous
chemical barrier under and around the column pits, walls, trenches,
basement excavation, top surface of the plinth filling, junction of
wall and floor, along the external perimeter of building, expansion joints,
over the top surface of consolidated earth on which apron is to be laid,
surrounding of pipes and conduits, with chloropyriphos emulsifiable
concentrates of 20% concentration, including cost of chemical, diluting
in water to one percent concentration , labour, HOM of equipments,
complete as per specifications. (Plinth area of the building at ground
floor only shall be measured ) Specification No. KBS : 3.2.6 I 3.2.7
3.5 KSRB 3.5: Providing, injecting chemical emulsion for Anti-Termite Sqm 226.00
Treatment of soil under existing floors using chemical emulsion at one
litre I hole 30mm apart including drilling 12mm. dia holes and plugging
with cement mortar 1:2 proportion to match with the existing floors with
chlorophyriphos emulsion concentrate 20%, including cost of chemical
diluting in water to one percent concentration, labour, HOM of equipments,
complete as per specifications.
9
Sl. No. Description Unit Rate
Rs. Ps.
3.7 KSRB 3.7: Providing , injecting chem ical emulsion for Anti-Termite m 236.00
Treatment at points of contacts of wood work by chemical emulsion
Chloropyriphos ( in oil or kerosene based solution ) at 0.5 liters per hole
by drilling 6mm. dia holes at downward angle of 45 degree at 150mm. c
to c and sealing the same including cost of chemicals , diluting in water to
one percent concentration, labour, HOM of equipments, complete as per
specifications.
Specification No. KBS : 3.3. 7
10
CEMENT CONCRETE
11
51. No. Description Unit Rate
Rs. Ps.
12
51. No. Description Unit Rate
Rs. Ps.
4.7 KSRB 4-1.7 : Providing and laying in position plain cement concrete cum 5,282.00
of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size
graded granite metal coarse aggregates @0.84cum and fine aggregtes
@ 0.56cum, machine mixed, concrete laid in layers not exceeding
15 ems. thick, well compacted, in foundation, plinth and cills, ncluding
cost of all materials, labour, HOM of machinery, curing complete as per
specifications.
Specification No. KBS 4.1, 4.2
4.8 KSRB 4-1 .8 : Extra for laying cement concrete under water including cum 103.00
cost of pumping or dewatering and clearing slush as per specifications.
Specification No. KBS 4.2, 4.8
4.9 KSRB 4-1 .9: Extra for laying cement concrete under foul conditions. cum 139.00
Specification No. KBS
4.10 KSRB 4.2.1 : Providing and laying in position reinforced cement concrete cum 6,221.00
of Design mix M25 with OPC cement @ 340kgs, with 20mm and down
size graded granite metal coarse aggregates @0.70 cum and fine
aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming
to IS 9103-1999 reafirmed-2008 at machine mixed , concrete laid in
layers not exceeding 15 ems thick, vibrated for all works in foundation
for footings, pedastals, retaining walls, return walls, walls (any
thickness) including attached pilasters, columnspillars, posts, struts,
buttresses, bed blocks, anchor blocks &plinths etc., including cost of
all materials, labour, HOM of machinery, curing, complete but excluding
cost of reinforcement as per specifications.
Specification No. KBS 4.1, 4.6
4.11 KSRB 4.2.2 : Providing and laying in position reinforced cement cum 6,011.00
concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum
and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters
confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete
laid in layers not exceeding 15 ems thick, vibrated for all works in
foundation for footings, pedastals, retaining walls, return walls,
walls (any thickness) including attached pilasters, columnspillars,
posts, struts, buttresses, bed blocks, anchor blocks & plinths
etc., including cost of all materials, labour, HOM of machinery, curing,
complete but excluding cost of reinforcement as per specifications.
Specification No. KBS 4.1, 4.6
4.12 KSRB 4.2.7 : Providing and laying in position reinforced cement
concrete of design mix M25 with OPC cement @ 340kgs, with 20mm cum 6,367.00
and down size graded granite metal coarse aggregates @0.70cum and
fine aggregtes @ 0.47cum, with superplastisiser @31ts confirming to
IS 91 03-1999 Reaffirmed-2008, machine mixed, concrete laid in layers
not exceeding 15 ems thick, vibrated for all works in ground floor level
for roof slabs, staircase, lintels and beams retaining walls, return
walls, walls (any thickness) including attached pilasters, columns,
lintles, pi!lars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window cills, fillets
etc., including cost of all materials, labour, HOM of machinery, curing,
complete but excluding cost of reinforcement as per specifications.
Specification No. KBS 4.1 , 4.6
13
Sl. No. Description Unit Rate
Rs. Ps.
4.13 KSRB 4.2.8: Providing and laying in position reinforced cement cum 6,158.00
concrete of design mix M20 with OPC cement @ 320kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates@ 0.46cum, with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers
not exceeding 15 ems thick, vibrated for all works in ground floor level
for roof slabs, staircase, lintels, and beams retaining walls, return
walls, walls (any thickness) including attached pilasters, columns,
pillars, posts, struts, buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks, plain window cills, fillets
etc., including cost of all materials, labour, HOM of machinery, curing,
complete but excluding cost of reinforcement as per specifications.
Specification No. KBS 4.1 , 4.6
4.19 KSRB 4.2.1 0 : Providing and laying in position reinforced cement sqm 456.00
concrete of design mix M20 with OPC cement @ 24kgs, with 12mm
and down size graded granite metal coarse aggregates @0.05175cum
and fine aggregtes@ 0.0345cum, with superplastisiser @0 .2251ts,
machine mixed, well compacted for plain chajja of 7.5 ems. average
thickness, upto ground floor level, including cost of all materials, labour,
HOM of machinery, finishing , curing, complete but excluding cost of
reinforcement as per specifications.
Specification No. KBS 4.1 , 4.6
4.20 KSRB 4.2.11 : Providing and laying in position reinforced cement sqm 514.00
concrete of design mix M20 with OPC cement @ 27 .20kgs, with 12mm
and down size graded granite metal coarse aggregates @0.05865cum
and fine aggregtes@ 0.0391cum, with superplastisiser @0 .2251ts ,
machine mixed, well compacted for plain chajja of 8.5 ems. average
thickness, upto ground floor level, including cost of all materials, labour,
HOM of machinery, finishing, curing, complete but excluding cost of
reinforcement as per specifications.
Specification No. KBS 4.1 , 4.6
4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. m 20.00
chajja with plastering ( labour charges only ) as per specifications.
Specification No. KBS
4.22 KSRB 4-3.1 :Extra if vibrator is used for Item No.4-1 to 4-8 as per specifications. cum 17.00
Specification No. KBS 4.2.6
4.23 KSRB 4-3.2 : Deduct where machine mixing is not done cum 17.00
Specification No. KBS 4.2.2.5 I 4.3.2.2
4.24 KSRB 4-4.1 : Extra for use of water proofing compound in Cement cum 255.00
concrete of mix 1:1 :2,at one kg of compound per bag of cement.
Specification No. KBS
4.25 KSRB 4-4.2 : Extra for use of water proofing compound in Cement cum 189.00
concrete of mix 1:1.5:3,at one kg of compound per bag of cement.
Specification No. KBS
4.26 KSRB 4-4.3 : Extra for use of water proofing compound in Cement cum 151.00
concrete of mix 1:2:4,at one kg of compound per bag of cement.
Specification No. KBS
14
51. No. Description Unit Rate
Rs. Ps.
4.27 KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick Sqm 967.00
with 6mm dia mild steel bars at 20 ems. c to c both horizontally and
vertically fixed with ch icken mesh for drop chajja, facia , backing to cup
boards including cost of all materials, labour, providing and removing
form work HOM of machineries, curing, complete as per specifications.
Specification No. KBS
4.28 KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, Sqm 231.00
propping etc. , and removal of form work for foundations, footings, bases
of columns for mass concrete including cost of all materials, labour
complete as per specificaitons.
Specification No. KBS 4.6.2
4.18 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, Sqm 313.00
propping etc., and removal of form work for flat surface such as roofs,
landings, balconies and likes, thickness upto 200 mm including cost of
all materials, labour complete as per specificaitons.up to 3.50m from
Ground level. Specification No. KBS 4.6.2
4.29 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting,
propping etc., and removal of form work for suspended floors, landings,
balconies and likes, thickness upto 200 mm including cost of all
materials, labour complete as per specificaitons for heights more than
3.50m from ground level.
Specification No. KBS 4.6.2
4.29.2 - do - 0 to 5 mts Sqm 550.00
4.29.3 - do - 0 to 6 mts Sqm 730.00
4.29.4 - do - 0 to 7mts Sqm 890.00
4.29.5 - do - 0 to 8 mts Sqm 1,050.00
4.29.6 - do - 0 to 9 mts Sqm 1,300.00
4.29.7 - do - 0 to 10 mts Sqm 1,550.00
4.29.8 - do - 0 to 11 mts Sqm 1,800.00
4.29.9 - do - 0 to 12 mts Sqm 2,060.00
4.29.10 - do - 0 to 13 mts Sqm 2,310.00
4.29.11 - do - 0 to 14mts Sqm 2,580.00
4.29.12 - do - 0 to 15 mts Sqm 2,900.00
4.29.13 - do - 0 to 16 mts Sqm 3,200.00
4.30 KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, Sqm 384.00
propping etc. , and removal of form work for flat surface such as
suspended floors, roofs, landings, balconies and likes, thickness above 200
mm including cost of all materials, labour complete as per Specification.
Specification No. KBS 4.6.2
4.31 KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, Sqm. 293.00
propping etc., and removal of form work for vertical surface such as walls
at any thickness, including attached pilasters, buttresses, plinth cills and
string courses cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
15
Sl. No. Description Unit Rate
Rs. Ps.
4.32 KSRB 4-6.5 : Providing and removing centering , shuttering , strutting , Sqm. 366.00
propping etc. , for columns, pillars, post and struts, square I rectangular/
polygon in plan including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2
4.33 KSRB 4-6 .6 : Providing and removing centering , shuttering , strutting , Sqm 859.00
propping etc. , and removal of form work for columns, pillars,post and
struts , circular or curved in plan including cost of all materials, labour
complete as per specifications. Specification No. KBS 4.6.2
4.34 KSRB 4-6 .7 :Providing and removing centering , shuttering , strutting , Sqm 256.00
propping etc., and removal of form work for sides and soffits of beams,
beam haunchings , cantilever girders , bressumers and lintels not
exceeding 1m in depth including cost of all materials , labour complete
as per specifications.
Specification No. KBS 4.6.2
4.35 KSRB 4-6.8 : Providing and removing centering , shuttering , strutting, Sqm 338.00
propping etc. , and removal of form work for sides and soffits of
beams, beams haunchings, cantilelver, girders , bressumers and lintels
exceeding 1m in depth including cost of all materials, labour complete
as per specifications.
Specification No. KBS 4.6.2
4.36 KSRB 4-6 .9 :Providing and removing centering , shuttering , strutting , Sqm 678.00
propping etc., for edges of slabs and breaks in floor including cost of
all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.37 KSRB 4-6.10 :Providing and removing centering , shuttering , strutting, Sqm 270.00
propping etc. , for chajjas, corbels etc., including edges including cost
of all materials, labour complete as per specifications.
Specification No. KBS 4.6 .2
4.38 KSRB 4-6.11 :Providing and removing centering , shuttering , strutting , Sqm 475.00
propping etc. , and removal of form work for Stairs (excluding landing)
except spiral staircase including cost of all materials, labour complete
as per specificaiton.
Specification No. KBS 4.6.2
4.39 KSRB 4-6 .12 :Providing and removing centering , shuttering, strutting, Sqm 510.00
propping etc. , and removal of form work for cornices and mouldings
including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.40 KSRB 4-6.13 :Providing and removing, centering , shuttering, strutting , Sqm 451.00
propping etc. , and removal of form work for vertical fins and vertical
sun breakers including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2
4.41 KSRB 4-6.14 :Providing and removing centering , shuttering, strutting, Sqm 422.00
propping etc., and removal of form work for sloping or battering surface
including folded plates where inclination to horizontal plane does not
exceed 30 degree requiring shuttering only on the under side including
cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
16
Sl. No. Description Unit Rate
Rs. Ps.
4.42 KSRB 4-6.15 : Providing and removing centering, shuttering, strutting, Sqm 653.00
propping etc., and removal ofform work for where inclination to horizontal
plane exceeds 30 degree (where shuttering may be provided both on
under side and upper side if required) including cost of all materials,
labour complete as per specifications.
Specification No. KBS 4.6.2
4.43.1 KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work m 303.00
using 10-15 ems. dia best quality casurina poles of 4m over all length
(3m +0.5m projection + 0.5m In to the ground), the distance between
two rows being 1.25m and spacing of posts being 2m in both rows with
2 horizontal posts with 0.5 mm overlap on either side and braces at
2 m c to c including longitudinal and transveres middle braces to step
up and providing platform with casurina poles, forms tied up using coir
rope complete as per specifications.
Specification No. KBS
4.43.2 - do- KSRB 4-7 : Scaffolding for stone masonry converted to cum. cum 227.00
4.43.3 -do- KSRB 4-7: Scaffolding for stone masonry work converted to sqm. sqm 108.00
4.44 KSRB 4-8 : Providing two legged scaffolding for brick masonry work
using 10-15 ems. dia best quality Casurina poles of 4m over all length
(3m +0.5m projection + 0.5m In to the ground) the distance between
two rows being 1.25m and spacing of post being 2m in both rows with
2 horizontal posts with 0.5 mm overlap on ei ther side and braces at
2 m c to c including longitudinal and transveres middle braces to step
up and providing platform with casurina poles, forms tied up using coir
rope complete as per specifications. Specification No. KBS
4.44.1 - do - for non modular brick work cum 256.00
(Non modular standard bricks: 4x0.23x3=2.76 cum)
4.44.2 - do - for modular brick work cum 297.00
(Modular bricks 4x0.2x3=2.4 cum)
4.44.3 - do - for non modular brick work Sqm 59.00
4.44.4 - do - fo modular brick work Sqm 59.00
4.45 KSRB 4.9.1 : Providing mild steel reinforcement for R.C.C work including q 6,048.00
straightening, cutting, bending, hooking, placing in position, lapping and
I or welding wherever required, tying with binding wire and anchoring
to the adjoining members wherever necessary complete as per design
(laps, hooks and wastage shall not be measured and paid) cost of
materials, labour, HOM of machinery complete as per specifications.
Specification No. KBS 4.6.3
4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work
including straightening, cutting, bending, hooking, placing in position,
lapping and I or welding wherever required, tying with binding wire and
anchoring to the adjoining members wherever necessary complete
as per design (laps, hooks and wastage shall not be measured and
paid) cost of materials, labour, HOM of machinery complete as per
specifications. Specification No. KBS 4.6.3
4.46.2 - do - TMT bars Fe 500 Tonne 56,050.00
4.46.3 - do - TMT bars Fe 550 Tonne 56,701.00
17
51. No. Description Unit Rate
Rs. Ps.
4.47 Lift charges for steel of all diameters for additional floors over gro~11d Tonne 472.00
floor per floor height of 3.5 m. or part thereof cost of labour, complete
as perspecifications. Specification No. KBS
4.48 Providing and laying cement concrete using 20 mm and down size cum 5,879.00
granite coarse aggregates and fine aggregates of ready mixed concrete
(RMC) M20 for R.C.C works laid in 15 ems thick layers and well
compacted by vibrating, curing, for raft foundation column footing , main
and secondary beams with all lead and lifts etc., complete (exclusive
of cost of steel and fabrication charges.)
4.49 Providing and laying cement concrete using 20mm and down size
granite coarse aggregates and fine aggregates of ready mixed concrete
for RCC works laid in 15 em thick layers and well compacted including
vibrating curing etc., with all lead and lift etc. , complete. (exculsive of
cost of steel and fabrication charges)
4.49.1 Ready mixed Cement concrete for Beams, Staircase and Roof with M-20 cum 5,879.00
4.49.2 Ready mixed Cement concrete for Beams, Staircase and Roof with M-25 cum 6,065.00
4.49.3 Ready mixed Cement concrete for Beams, Staircase and Roof with M-30 cum 6,243.00
4.49.4 Ready mixed Cement concrete for Beams, Staircase and Roof with M-35 cum 6,485.00
4.49.5 Ready mixed Cement concrete for Beams, Staircase and Roof with M-40 cum 6,728.00
Note : The RMC should be obtained only from the plants
certified by the quality council of India as per letter No. CE,
C&B, AE-2, 2015-16 Dt. 02.09.2015
4.50 Providing and mixing synthetic fibers 100% virgin triangular monofilament cum 338.00
polyester I polypropylene fibers, 12mm cut in length for use as secondary
fiber reinforcement in RMC I in-situ concrete at 900 grams per cubic
meter of concrete. (Grade of concrete- M 15 to M60)
4.51 Providing and mixing fibermesh MD(Multi Dimensional) Graded cum 710.00
(fibermesh inforce e3) fibrilated (interconnected bundles of fibers that
open up during the mix process) 100% virgin Polypropylene fibers
contains no reprocessed olefin materials and are specially manufactured
with 25 individual unique fiber design to an optimum gradation for use
as complete secondary reinforcement. Application per cubic meter
shall equal a minimum of 0.1% by volume (0.9kg per cubic meter) in the
concrete. Fibermesh MD Graded Polypropylene fibrilated fiber should
confirm to ASTM C 1116 type Ill 4.1.3 ASTM C 1116 performance level
1% ASTM C 1339 (Minimum average residual strength of 0.35 Mpa).
4.52 Providing and mixing fibermesh stealth e3 Fibermesh150 multi cum 410.00
dimensional graded multifilamenrt 1OO%virgin polypropylene fibres
contains no reprocesserd olfrin materials and are specifically
manufactured for use as concrete secondary reinforcement. Application
per cubic meter shall be @ 0.9kg to 1.8kg per cum of concrete.
Fibermesh stealth e3 shall confirm to ASTM C 1116 type 111.4.1 06.
4.53 Providing and casting reinforced cement concrete racks with design mix sqm 887.00
M20, granite or trap jelly 12mm and down size 5 ems thick and below
with reinforcements of 6mm dia MS bars at 15 ems. Centre to centre
for main reinforcement and at 30cms centre to centre for distribution
including supports wherever necessary with burnt brick in CM 1:4
including centring, form work, curing etc., complete (inclusive of cost
of steel and fabrication charges).
18
Sl. No. Description Unit Rate
Rs. Ps.
4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design sqm 450.00
mix M20 using clean granite or trap jelly of 20mm and down size with
necessary reinforcements at 20cms centre to centre as per design
including form work, centring, curing, etc., complete (exclusive of cost
of steel and fabrication charges).
4 .55 Providing and fixing RCC slabs 5 ems thick for wall shelves with 12mm sqm 564.00
and down size jelly cement concrete design mix M20 including CM 1:3
plaster finishing , curing etc. , complete (excluding the cost of steel and
fabrication charges).
4.56 Providing RCC design mix M20 using granite metal 20mm and down size
for 7.5 ems thick solid parapet or perforated as per design, specification
and directions.(exclusive of cost of steel and fabrication charges)
including necessary centring, form work and finishing smooth with
CM (1 :3) etc. , complete.
4 .56.1 - do- 7.5 ems thick sqm 443.00
4.56.2 -do- 10 ems thick sqm 636.00
4 .57 Providing and mixing Alkal i resistant glass fibers HD12 to arrest cum 330.00
plastic shrinkage cracks and to provide as a secondary reinforcement
in concrete at 600 gms I cum of concrete and containing minimum
127 millions of fibers of length 12mm, diameter 14 microns, specific
gravity 2.68, modulus of elasticity 72 Gpa and having the aspect ratio
(length/dia) of 857, including cost of labour,materials and HOM of
machineries etc complete. (NOTE: Rate is for cum of concrete)
Note:
Quantities calculated are based on concrete density of 2400 Kg/cum. and proportion of
fine aggregate to coarse aggregate (by mass) generally 1:2 but subjected to an upper
limit of 1:1.5 and a lower limit of 1 :2.5.
19
Sl. No. Description Unit Rate
Rs. Ps.
CEMENT CONSTANTS FOR CONCRETE GRADE M20 AND ABOVE (FOR PPC/PSC)
20
51. No. Description Unit Rate
Rs. Ps.
21
STONEWORK
22
Sl. No. Description Unit Rate
Rs. Ps.
5.0 STONEWORK
5.1 KSRB 5-1.1 : Providing and constructing granite I trap I basalt rubble cum 1,744.00
stone masonry in foundation with mud mortar (uncoursed), bond stones
at 2m. apart in each course including cost of materials, labour, curing
complete as per specifications. KBS 5.1.12
5.2 KSRB 5.1-2 : Providing and constructing granite I trap I basalt rubble cum 3,072.00
stone masonry in foundation with cement mortar 1:8 (uncoursed), bond
stones at 2m. apart in each course including cost of materials, labour,
curing complete as per specifications. KBS 5.1.12
5.3 KSRB 5.1 -3 : - do - with cement mortor 1:6 KBS 5.1.12 cum 3,249.00
5.4 KSRB 5.2-1 : Providing and constructing granite I trap I basalt size cum 2,911 .00
stone masonry in foundation with mud mortar, stone hammerd dressed
in courses not less than 20 ems high, bond stones at 2m. apart in each
course including cost of materials, labour, curing complete as per
specifications. KBS 5.1 .12
5.5 KSRB 5.2-2 : Providing and constructing granite I trap I basalt size cum 4,037.00
stone masonry in foundation with cement mortar 1:8, stone hammerd
dressed in courses not less than 20 ems high, bond stones at 2m. apart
in each course including cost of materials, labour, curing complete as
per specifications. KBS 5.1.13
5.6 KSRB 5.2-3 : - do - cement mortor 1:6 KBS 5.1.13 cum 4,187.00
5.9 KSRB 5.3-3 : Providing and constructing granite I trap I basalt size stone cum 5,005.00
masonry in basement with cement mortar 1:6, edges of stones chistle
dressed in courses not less than 15 ems high, bond stones at 2m. apart
in each course including cost of materials, labour, curing complete as
per specifications. KBS 5.1 .13
5.12 KSRB 5.4-3 : Providing and constructing granite I trap I basalt size stone cum 5,249.00
masonry in superstructure with cement mortar 1:6 , edges of stones
chistle dressed in courses not less than 15 ems high, bond stones at
2m. apart in each course including cost of materials, labour, scaffolding,
curing complete as per specifications. KBS 5.1.13
5.13 KSRB 5.4-4 : - do - with cement mortor 1:4 cum 5,574.00
5.14 KSRB 5-5 : Extra lift charges for size stone masonry above ground floor cum 195.00
for every additional floor. KBS 5.1.13
5.15 KSRB 5-6 : Extra for constructing stone masonry in square or rectangular cum 300.00
pillars complete as per specifications. KBS 5.1 .13
5.16 KSRB 5-7 : Extra for constructing masonry in circular pillars including cum 696.00
cost of extra materials and labour complete as per specifications.
KBS 5.1.13
5.17 KSRB 5-8.1 : Providing one line dressing to granite stone slab I granite Sqm 545.00
stone masonry as per specifications. KBS 5.1.13
23
Sl. No. Description Unit Rate
Rs. Ps.
5.18 KSRB 5-8.2 : Providing two line dressing to granite stone slab I granite Sqm 909.00
stone masonry as per specifications. KBS 5.1.13
5.19 KSRB 5-8.3 : Proiding three line dressing to granite stone slab I granite Sqm 1,272.00
stone masonry as per specifications. KBS 5.1.13
5.20 KSRB 5-8.4 : Providing pulmane finish only on three line dressed surface Sqm 359.00
as per specifications. KBS 5.1 .13
5.21 KSRB 5-8.5: Providing quoin dressing to stone masonry and stone slabs, m 91.00
two line 5 ems wide on each face as per specifications.(measurement
including mortar joints) KBS 5.1.13
5.22 KSRB 5-9 : Providing chamfering edges to stone slab 2.5 ems. wide as m 35.00
per specifications. (only chamfered length shall be recorded )
KBS 5.1.13
5.23 KSRB 5-10 : Providing hammer dressing to size stones as per specifications. No 6.00
KBS 5.1 .13.3
5.24 KSRB 5-11 : Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum
face shell thickness of 30mm and web thickness of 25mm with block
density between 11 00kglm3 and 1500kglm3 having a minimum
average compressive strength of 5.00 Nlmm2 confirming to IS 2185
(Part 1) : 2005 and constructed with CM 1:4, as per IS 2572:2005
including cost of all materials, labour charges, scaffolding, curing, hire
charges of machineries etc., complete as per specifications.KBS No.5.4
5.24.1 - do - with cement concrete cavity blocks (Hollow blocks) of size Sqm 948.00
400x200x200 mm
5.24.2 - do - with cement concrete cavity blocks (Hollow blocks) of size Sqm 919.00
400x150x200 mm
5.25 KSRB 5-12: Providing and constructing load bearing wall with cement
concrete cavity blocks (Hollow blocks) Grade B having a minimum
face shell thickness of 30mm and web thickness of 25mm with block
density between 11 00kglm3 and 1500kglm3 having a minimum average
compressive strength not less than 3.5 Nlmm2 confirming to IS 2185
(Part 1):2005 and constructed with CM 1 :4, as per IS 2572:2005
including cost of all materials, labour charges, scaffolding, curing, hire
charges of machineries etc. , complete as per specifications. KBS No.5.4
5.25.1 - do - with cement concrete cavity blocks (Hollow blocks) of size Sqm 919.00
400x200x200mm
5.25.2 - do - with cement concrete cavity blocks (Hollow blocks) of size Sqm 904.00
400x150x200mm
5.26 KSRB 5-14: Providing and constructing load bearing wall with solid
concrete blocks having block density not less than 1800kglm3 having
a minimum average compressive strength of 4.00 Nlmm2 confirming to
IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005
including cost of all materials labour charges, scaffolding, curing, hire
charges of machineries etc., complete as per specifications. KBS No.5.4
24
51. No. Description Unit Rate
Rs. Ps.
5.28 KSRB 5-15: Providing and constructing non load bearing wall with solid Sqm 716.00
concrete blocks of size 400x1 00x200mm having a block density not less
than 1800kg/m3 having a minimum average compressive strength of
4.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with
CM 1:4, as per IS 2572:2005 including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete
as per specifications. KBS No.5.4
5.29 Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4
and finished with CM 1:3 plastering and finishing cutting etc., complete.
5.29.1 - do - of size 450 x 200 x 400 mm No. 364.00
5.29.2 - do - of size 450 x 150 x 500 mm No. 353.00
5.30 Providing and fixing pre cast solid cement concrete kerb stones made No. 313.00
out of C. C. 1:2:4 with top and bottom width 114 and 165 mm respectively,
400mm high and 450mm in length finished with CM 1 :3 plastering
and finishing cutting, including form work, curing, including cost of all
materials, labour, hire charges of machinery, loading, unloading, lead
and lift, transportation etc., complete.
5.31 Providing granite slabs of selected quality roughly dressed and fixed in
cement mortar (1 :6) including fixing curing etc., complete.
5.31 .1 -do- 7.5 ems thick Sqm 628.00
5.31 .2 -do- 10 ems thick Sqm 779.00
5.32 Removing B.S. slab of Drain and stacking. Sqm 62.00
5.33 Removing & Refixing stone slabs of drains and pointing in C.M (1 :3) Sqm 76.00
Note:
1. Additional rate of Rs. 30.00/Sqm. for item no. 5.24, 5.25, 5.26, 5.27, 5.28, 5.34 for
every additional floor.
25
9~
XliOA\ X:llll&
51. No. Description Unit Rate
Rs. Ps.
6.0 BRICKWORK
6.1 KSRB 6-1.1 :Providing and constructing burnt brick masonry with cum 5,114.00
approved quality of non-modular bricks of standard size of class
designation 3.5 Newton per sqmm with mud mortar for basement and
superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications.
Specification No. KBS 6.2
6.2 KSRB 6-1 .2 : Providing and constructing burnt brick masonry for cum 6,141.00
basement and superstructure with approved quality of non-modular
bricks of standard size of class designation 3.5Newton per sqmm
with cement mortar1 :8 including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.3 KSRB 6-1.3:- do- with cement mortar 1:6 cum 6,269.00
Specification No. KBS 6.2
6.5 KSRB 6-2.2 : Providing and constructing burnt brick masonry with cum 6,532.00
approved quality of non-modular bricks of standard size of class
designation 5.0Newton per sqmm (table moulded) with cement mortar
1:8 for basement and superstructu/re including cost of materials, labour
charges, scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.6 KSRB 6-2.3 : - do -with cement mortar 1:6 cum 6,685.00
Specification No. KBS 6.2
6.7 KSRB 6-2.4 : Providing and constructing burnt brick masonry with cum 6,963.00
approved quality of non-modular bricks of standard size of class
designation 5.0 Newton per sqmm with cement mortar 1:4 for
basement and superstructure including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.8 KSRB 6-3.1 : Providing and constructing burnt brick masonry with cum 9,918.00
approved quality of non-modular bricks of standard size of class
designation 7.5Newton per sqmm with cement mortar 1:8 for
basement and superstructure (Machine moulded Wirecut bricks) with
cost of materials, labour charges, scaffolding , curing complete as per
specifications.
Specification No. KBS 6.2
6.9 KSRB 6-3.2 : - do - with cement mortar 1:6 cum 10,046.00
Specification No. KBS 6.2
6.10 KSRB 6-3.3 :-do- with cement mortar 1:4 cum 10,325.00
Specification No. KBS 6.2
6.11 KSRB 6-3.4 : - do -with cement mortar 1:3 cum 10,603.00
Specification No. KBS 6.2
27
51. No. Description Unit Rate
Rs. Ps.
6.13 KSRB 6-4.2 : Providing and constructing burnt brick masonry with cum 5,794.00
approved quality of modular bricks ground moulded of standard
size of class designation 3.5Newton per sqmm with cement mortar
1:8 for basement and superstructure with cost of materials, labour
charges, scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.14 KSRB 6-4.3 : - do -with cement mortar 1:6 cum 5,906.00
Specification No. KBS 6.2
6.16 KSRB 6-5.2 : Providing and constructing burnt brick masonry with cum 6,430.00
approved quality of modular bricks of standard size of class
designation 5.0Newton per sqmm (table moulded) with cement mortar
1:8 for basement and superstructure including cost of materials, labour
charges, scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.17 KSRB 6-5.3 : - do -with cement mortar 1:6 cum 6,543.00
Specification No. KBS 6.2
6.18 KSRB 6-5.4 : - do -with cement mortar 1:4 cum 6,786.00
6.19 KSRB 6-6.1 : Providing and constructing burnt brick masonry with cum 10,249.00
approved quality of modular bricks of standard size of class
designation 7.5Newton per sqmm (Machine moulded Wirecut bricks)
with cement mortar 1:8 for basement and superstructure including cost of
materials, labour charges, scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
6.20 KSRB 6-6.2 : - do - with cement mortar 1:6 cum 10,362.00
Specification No. KBS 6.2
6.21 KSRB 6-6.3 : - do -with cement mortar 1:4 cum 10,605.00
Specification No. KBS 6.2
6.22 KSRB 6-6.4 : - do -with cement mortar 1:3 cum 10,849.00
Specification No. KBS 6.2
6.23 KSRB 6-7.1 : Construction of partition wall 11 .2 ems thick with non Sqm 858.00
modular ground moulded burnt bricks of class designation
3.5 Newton per sqmm with cement mortar 1:4 including providing and
fixing plaster mesh manufactured out of hot dipped galvanised iron of
nominal thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at
7.5 m. c to c including cost of materials, labour charges, scaffolding,
curing complete as per specifications.
Specification No. KBS 6.2
6.24 KSRB 6-7.2 : - do- with bricks of class designation 5.0 Newton per sqm Sqm 933.00
Specification No. KBS 6.2
6.25 KSRB 6-7.3 : Construction of partition wall 11.2 ems thick with Sqm 834.00
non-modular ground moulded burnt bricks of class designation
3.5 Newton per sqmm with cement mortar 1:4 including cost of materials,
labour charges, scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
28
51. No. Description Unit Rate
Rs. Ps.
6.26 KSRB 6-7.4:- do- with bricks of class designation 5.0 Newton per sqm Sqm 891.00
Specification No. KBS 6.2
6.27 KSRB 6-8.1 :Construction of partition wall 10 ems thick with ground Sqm 719.00
moulded modular burnt bricks of class designation 3.5 Newton
per sqmm with cement mortar 1:4 including providing and fixing plaster
mesh manufactured out of hot dipped gelvanised iron of nominal
thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c to c
including cost of materials, labour charges, scaffolding, curing complete
as per specifications. Specification No. KBS 6.2
6.28 KSRB 6-8.2 : Construction of partition wall 10 ems thick with table Sqm 788.00
moulded modular burnt bricks of class designation 5.0Newton per
sqmm with cement mortar 1:4 including providing and fixing plaster
mesh manufactured out of hot dipped gelvanised iron of nominal
thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c to c
including cost of materials, labour charges, scaffolding, curing complete
as per specifications. Specification No. KBS 6.2
6.29 KSRB 6-8.3 :Construction of partition wall 10 ems thick with ground Sqm 732.00
moulded modular burnt bricks of class designation 3.5Newton per
sqmm with cement mortar 1:4 including cost of materials, labour charges,
scaffolding, curing complete as per specifications. Specification No. KBS 6.2
6.30 KSRB 6-8.4 : Construction of partition wall1 0 ems thick with table moulded Sqm 746.00
modular bumt bricks of class designation 5.0 Newton per sqmm with cement
mortar 1:4 including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2
6.31 Providing and constructing approved quality of standard size precast cum 5,370.00
FLY ASH brick masonry with compresive strength not less than
3.5 Newton per sqmm with cement mortar 1:6 for basement and
superstructure with cost of materials, labour charges, scaffolding, curing
complete as per specifications.
6.32 Provinding and constructing non load bearing wall with Light Weight
Concrete (Autoclaved areated concrete) Blocks confirming to IS:2185
(part-3) 1984 and IS 6441-1972 of compressive strength of 3.0N/sq mm
with a thin layer of polymer based jointing solvent for super structure
with neccesary scaffolding, curing including cost of all materials, labour,
lead& lift etc, complete as per specifications.
6.32.1 - do -with 600x200x1 OOmm size Blocks Sqm 1,055.00
6.32.2 - do - with 600x200x150mm size Blocks Sqm 1,503.00
Note:
1. Lift charges: The above rates are applicable for Ground floor only. An
additional rate of Rs. 50.00/cum and Rs. 5/sqm per floor may be added
for every additional floor above or below the ground floor.
2. Add 10% extra for gable portion.
29
0£
7.1 KSRB 7.1 : Providing and fixing in position collapsible steel shutters Sqm 4,033.00
with single or double leaf with vertical channel 20mmx1 Ommx2mm
braced with flat iron diagonals 20mmx5mm size, with top and bottom rails
ofT iron sections of 40x40x6 mm with 38mm dia steel pulleys complete
with bolt and nuts, locking arrangements, stoppers, handles on both
sides with 7.5cms openings at 10 ems. c to c applying a priming coat
of red lead paint. cost of materials, labour, HOM of machinery complete
as per specifications.
size of gate 2.4mx1.4m
Specification No. KBS 7. 7 I 7.12
7.2 KSRB 7.2: Providing and fixing 1mm thick M.S. sheet sliding shutters Sqm 2,830.00
with frame and diagonal braces of 40x40x6 mm angle Iron 3.1 5mm
thick M.S. Gusset plates at junctions and corners, 25mm dia pulley,
40x40x6 mm angles and T iron guide rail top and bottom respectively
with handles, stoppers and locking arrangements etc., including applying
a priming coat of red lead paint cost of materials, labour, HOM of
machinery complete as per specifications.
1 double leaf door of size 2.4x2.4m
Specification No. KBS 7.8 I 7.12
7.3 KSRB 7.3 : Providing and fixing 1mm thick M.S. sheet garage door with Sqm 2,332.00
frame and diagonal braces of size 40x40x6 mm angle Iron, 3.15mm thick
M.S. Gusset plates at the junctions and corners, with handles, stoppers
and locking arrangements etc., including applying a priming coat of red
lead paint cost of materials, labour, HOM of machinery complete as per
specifications.
Double leaf door of size 2.4x2.4m
Specification No. KBS 7. 9 I 7.12
7.4 KSRB 7.4 : Providing and fixing 1mm thick M.S. sheet garage door with Sqm 1,911 .00
frame and diagonal braces of size 40x40x6 mm angle Iron, using M.S.
flats 30x6 mm for diagonal braces and central cross pieces 3.15mm
thick M.S. Gusset plates at the junctions and corners, with handles,
stoppers and locking arrangements etc., including applying a priming
coat of red lead paint cost of materials, labour, HOM of machinery
complete as per specifications.
1 double leaf door of size 2.4x2.4m
Specification No. KBS 7.9 I 7.12
7.5 KSRB 7.5 : Providing and fixing pull and push type rolling shutters Sqm 2,862.00
of approved make out of 18 guage, 75mm wide cold rolled steel laths
of convex corrugation, with side guides and bottom rail, with interlocking
arrangements for steel laths by means of alternate clips, suspension shaft
with High tension coil type springs two numbers, mounted on specially
designed pipe shaft, with bracket plates, guide channels, ball bearing
arrangements, for inside & outside locking with push & pull operations
complete including pulling hooks, 4Nos. handles with all fittings and
accessories, painted with a coat of red lead paint (without top cover) cost
of materials, labour, HOM of machinery complete as per specifications.
Shutter size 3mx2.8 m
Specification No. KBS 7.10 I 7.12
31
Sl. No. Description Unit Rate
Rs. Ps.
7.6 KSRB 7.6 : Providing and fixing top covers made out of 20 guage m 473.00
M.S. sheet over pull and push rolling shutters bent to shape including
cost of red lead primer coat of painting , materials, labour, HOM of
machinery complete as per specifications.
Specification No. KBS 7.10.6 I 7.12
7.7 KSRB 7.7 : Providing and fixing in position in cement concrete Sqm 3,530.00
1:3:6 steel glazed windows and ventilators side hung/top hung fully
openable as per approved drawings using Z angles of 25x33x3mm,
weighing 1.419 Kg/m both for outer and inner frames and central mullion
section of size 25x46x3mm. weighing 2.28Kg/m duly providing T section
19x19x3mm weighing 0.839 kg/m for glazing of windows not more than
34 ems. c to c including providing and fixing 4mm . thick reeded glass
with teakwood beading of required size, all steel sections should confirm
to I.S 7452:1990, 4nos. of holdfasts of approved size, section should
be cut to length welded and electrically grinded subdividing frames of
unit shall be tenonned and revetted into the frames electrically. All the
steel surface shall be throughly cleaned free of rust and painted with
one coat of anti-corosive paint and finishing with two coats of ready mix
paint of approved colour and make including cost of materials, fixtures,
labour and HOM of machinery complete as per specifications.
Specification No. KBS 7.12.1 I 7.12.2 I 7.12.3 I 7.12
7.8 KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel Sqm 2,975.00
glazed windows and ventilators side hung/top hung 2/3 openable 1/3
fixed as per approved drawings using Z angles of 25x33x3mm, weighing
1.419 kg/m both for outer and inner frames and central mullion section
of size 25x46x3mm, weighing 2.28kg/m all duly providing T section
19x19x3mm weighing 0.839 kg/m for glazing of windows, not more than
34 ems. c to c including providing and fixing 4mm. th ick reeded glass
with teakwood beading of required size, all steel sections should confirm
to I.S 7452:1990, 4nos. of holdfasts of approved size, section should
be cut to length welded and grinded electrically subdividing frames of
unit shall be tenonned and revetted into the frames electrically. All the
steel surface shall be throughly cleaned free of rust and painted with
one coat of anti-corrosive paint and finishing two coats of ready mix
paint of approved colour and make including cost of materials, fixtures,
labour charges and HOM of machinery complete as per specifications.
7.9 KSRB 7.9 : Providing and fixing M.S.grill work for windows and Kgs 78.00
ventilators using M.S. flats, or M.S. square rods, or combination of
M.S. flats and square rods as per approved design , drawing including
cutting steel sections and welding the same to requ ired pattern with a
coat of red lead primer, cost of materials, fixtures, labour and HOM of
machinery complete as per specifications.
Specificat:on No. KBS 7.12
7.10 KSRB 7.1 0 : Providing and fixing in position aluminium windows
and ventilators as per approved drawings with sliding shutters using
double track window frame section of size 61.85x31.75mm. with
1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections
32
Sl. No. Description Unit Rate
Rs. Ps.
1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom
section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer
side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock
section 40mmx26.7mm, 1.1 mm thick, weight 0.469 kg/m. the shutters
mounted on nylon rollers with approved quality of fixtures such as
aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick
plain glass for shutters fitted with rubber beading aluminium sections
including cutting to required length, joints mitred subdividing the frame
tenonned and rivetted in the assembled frame stiffened with end clips
at corners angles etc., and fixed to the walls, lintels, floor beams/cills
as the case may be with necessary steel screws, raul plugs, or teak
wood gatties including cutting masonry or concrete and making good
the original surface using cement mortar, aluminium sections pretreated
for removal of any Specification No. KBS
7.10.1 -do- using aluminium section anodized to 12- 15 microns. Sqm 3,818.00
7.10.2 -do- using aluminium section powdered coated to a minimum of60-70 Sqm 3,898.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.11 KSRB 7.11 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using three
track window frame of size 92x31.75mm bottom section 1.3mm thick,
weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933
kg/m.shutter frame section comprising top and bottom section of size
40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side
outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter
interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight
0.469 kg/m, the shutters mounted on nylon rollers with approved quality
of fixtures such as aluminium handles tower bolts etc.; providing and
fixing 5.5mm. thick plain glass for shutters fitted with rubber beading
all aluminium sections including cutting to required length, joints mitred
subdividing the frame tenonned and rivetted , in the assembled frame,
stiffened with end clips for corners, angles etc., and fixed to the walls,
lintels, floor beams/cills as the case may be, with necessary steel screws,
raul plugs or teak wood gatties including cutting masonry or concrete
and making good the original surface using cement mortar.
7.11.1 -do- using aluminium section anodized to 12- 15 microns. Sqm 4,091.00
7.11 .2 -do- using aluminium section powdered coated to a minimum of 60-70 Sqm 4,181.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.12 KSRB 7.12 : Providing and fixing in position aluminium windows and
ventilators as per approved drawings with sliding shutters using four
track window frame of size 122.2x31. 75mm. for bottom section 1.1 mm
thick, weight 1.205 kg/m; sides and top sections 1.2 mm. thick weight
1.093 kg/m; shutter section comprising top and bottom section of size
40mmx18mm wall thickness 1.25mm. weight 0.417 kg./m, shutter
side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m,
33
Sl. No. Description Unit Rate
Rs. Ps.
34
Sl. No. Description Unit Rate
Rs. Ps.
7 .14.2 -do- using aluminium section powdered coated to a minimum of 60-70 Sqm 4,731.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.15 KSRB 7.1 5 : Providing, fabricating , assembling and fixing in position
aluminium partitions using aluminium sections of mat finish or glassy
finish in combination of plain grove, single grove and double grove as
per requirements for the frames of overall size 63.5mm x 38.1 mm. with
thickness of 2mm. having section weight, plain sections 1.054kg/m,
single grove thickness 1.95mm. section weight 1.094kg/m, double
grove thickness 1.9mm section weight 1.094kg/m and bottom member
114.3 mm . x 44.45mm. thickness 3.18mm. weight 2.646 kg/m;
aluminium louvres section of size 36.5mmx34.93mm 1.45mm. thick
section weight 0.429kg/m; bottom portions provided with 12mm. thick
prelaminated sheet both sides of approved colour lamination exterior
grade upto 0.9m height, spacing of vertical member not exceeding
0.6 m. c to c; sections are cut to the required lengths, joints mitered
and corners grinded subdividing frames tennoned and rivetted to the
frames; the assembled frame stiffened with corner angles, stripped and
fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns
on sides, R.C.C. lintels or beams at top and floor at bottom, including
cutting chistelling and making good with cement mortar to match the
surface; providing and fixing 5.5mm. thick plain glass for middle portion
viz., 0.9m. to 2.13 m. and top panel with louvres sections; the glass and
35
51. No. Description Unit Rate
Rs. Ps.
7.17.1 -do- using aluminium section anodized to 12- 15 microns. Sqm 6,221.00
7.17.2 -do- using aluminium section powdered coated to a minimum of Sqm 6,310.00
60-70 microns with exterior durable pure polyester grade powder of
approved quality.
7.1 8 Providing and fixing of Aluminium composite panel of approved Sqm 4,501 .00
make and colour for wall cladding for straight Brick!Rcc/stone walls &
coloumns/beams with necessary aluminium frame works at required
level made out of 50x25x3mm C section or equalent. The panel should
consist of 2.5 mm thermoplastic core of antitoxic LOPE sandwiched
between 0.25 skins thick aluminium sheet making a total panel thickness
of 3mm . The surfaces will be finished with PVDF based coating on
topsides and service coating on reverse sides would be in polyester
paint. The system shall be fixed using Gl brackets , aluminium L cleats
and stainless steel bolts and nuts complete with spring washer and cap
nuts and all other necessary accessories, sealing shall be done using
weather sealant of Dow Corning 789 with necessary rods etc., complete.
7.19 Providing and fixing of Aluminium composite panel of approved make Sqm 5,043.00
and colour for wall cladding for curved Brick!Rcc/stone walls & coloumns/
beams with necessary aluminium frame works at required level made
out of 50x25x3mm C section or equalent. The panel should consist
of 2.5 mm thermoplastic core of antitoxic LOPE sandwiched between
0.25 skins thick aluminium sheet making a total panel thickness of 3mm .
The surfaces will be finished with PVDF based coating on topsides and
service coating on reverse sides would be in polyester paint. The system
shall be fixed using Gl brackets, aluminium L cleats and stainless steel
bolts and nuts complete with spring washer and cap nuts and all other
necessary accessories, sealing shall be done using weather sealant
necessary rods etc., complete.
7.20 Providing, fabricating and fixing of stick type structural glazing using Sqm 5,871.00
Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/
mtr for vertical and Horizontal members and 63.5 mm x 38.1 x 1.33
mm of 0.759 kg/Mtr, as outer frame with Electro Anodized Paint coated
37
Sl. No. Description Unit Rate
Rs. Ps.
block finishing, using 6mm thick imported glass reflective hard coated
ocean blue raw glass with all necessary accesories like ultra glass
Silicon sealant of Space tape, Masking tape, Galvanized Anchaor
bolt, machine screws, 6mm thick M.S. angle 50mm x 150mm x 6mm
M.S. Galvanized L Brackets, structural sealent setting clocks, fasteners,
wall connection etc., complete.
7.21 "Providing fusion bonded epoxy coating not less than 175 microns
thickness and upto 300 microns to reinforcement of all diameters as
per IS: 13620-1993 including testing of coating at plant. The rate is
inclusive of cost on account of careful handling, PVC coated binding
wire instead of Gl Binding wire, touch up material supplied by coating
agency, repair work, loading, unloading and straightening of bent rods
etc., complete as per specification and as directed by the Engineer in
charge. (Inclusive of all taxes but excluding transportation charges)
7.22.1 -do- using aluminium section anodized to 12-15 microns. Sqm 2,900.00
7.22.2 -do- using aluminium section powdered coated to a minimum of60-70 Sqm 3,000.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.23 Providing and fixing door frame with or without ventilator made out Sqm 2,200.00
of cold rolled steel section of thickness 1.25mm formed into section
38
51. No. Description Unit Rate
Rs . Ps.
7.24 "Provid ing and fixing cold rolled prepainted steel windows of
IS standards, made out of 0.6mm thick deep drawing quality galvanised
on both sides 120gms/sq .mtr. Primer coat upto 5 microns with
thermosetting epoxy resin and finish painted with a polyester based
paint 20 microns thick. The size of profiles is approximately 46x52mm
for external frames , 46x46mm section for shutters, 46x70mm section for
centre mullion/transom and 18x31 mm section is for fixing glasses. The
section should be cut to length joint mitred and assembling by means of
corner brackets made out of cold rolled cold annealed strips of 1.2mm
thick duly galvanised and fixed with nickle plated self taping screws. The
shutters are provided with approved quality of fixtures like handles made
out of zamac alloy die cast and powder coated , receiver made out of
glass filled nylone and hinges made out of CRCA powder coated. 4mm
thick glass should be fixed with EPDM gaskets. Guard bars fabricated
out of 1Omm square bright bars shall be fixed horizontally at 125mm
C/C by rivetting to the external frame . The above frames are fixed to the
concrete I masonry walls by means of self expanding screws."
7.24.1 a)- do- with 4mm float glass without gaurd bars Sqm 4,689.00
b)- do- with 4mm tinted glass without gaurd bars Sqm 4,873.00
c)- do- with 4mm float glass with gaurd bars Sqm 5,434.00
d) - do- with 4mm tinted glass with gaurd bars Sqm 5,618.00
7.25 Providing and fixing cold rolled prepainted steel partitions of IS Sqm 2,700.00
standards , made out of 0.6mm of deep drawing quality galvanised
on both sides 120gms/Sq.mtr. Primer coated upto 5 microns with
thermosetting epoxy resin and finish painted with a polyester based paint
20 microns thick. The size of profiles is 46X52mm for external frame,
section for mullion or transom is of size 46x70mm and section for fixing
glass/board is of 18x31 mm. The section should be cut to length joint
mitred and assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and fixed
with nickel plated self taping screws. 5mm thick glass should be fixed
with EPDM gaskets. 1Omm thick prelaminated particle board shall be
fixed with the help of the clipping bead . The above frames are fixed
39
Sl. No. Description Unit Rate
Rs. Ps.
7.26 Supplying and fixing pressed steel door frames size 125x65 mm Sqm 3,500.00
manufactured from 1.25mm thick carbon steel or imported steel strips
with mitred joints of 900 for door openings and shutters made out of
seasoned Henne wood, styles of 30 mm, thick with lock rail of 160
mm, width, top and side rails of 100 mm. width and bottom rails of 250
mm width and panel filling with 12mm thick particle board of exterior
grade bonded with phenol formal dehide resin and the shutter shall
be rot proof, vermin proof, heat resistant guaranteed against shrinkage,
warpage and such other defects for a period of 3 years. This shall be
as per approved drawings, specification and direction including cost of
conveyance, manufacturing, painting with enamel paint 2 coats over primer
coat, cost of labour for all items of work, machinery, equipment and all other
incidental charges with all lead, lift, loading and unloading etc. , complete.
The Hollow portion of the frame to be filled with cement concrete 1:2:4.
7.27 "Supplying and fixing pressed steel window frame of size 100 x 50mm Sqm 3,800.00
manufactured from 1 .25 mm thick carbon steel or imported steel strips
with neat mitred joints at 900degree for window openings and shall be
suitable to fix M.S. grills as per design and drawings using 12mm dia rods
at 1OOmm Centre to Centre horizontally and two members of M.S flats of
6mmx40mm size at 150mm apart, welded into a frame of 6mmx40mm
size M.S. flats with 16mm size lugs, and 8 Nos. of 100mm size hinges,
4 Nos of Butt Stay pins and 4 Nos. Tower bolts and shutters half panelled
and hallf glazed with shutters made out of seasoned honne wood , styles
of 30mm thick and 1OOmm width and rails of 30mm thick and 1OOmm
width and using 4mm thick pin headed glass and panel, filling with 12mm
thick particle board of exterior grade bonded with phenol formal dehide
resin and the shutter shall be rot proof vermin proof, heat resistant
guaranteed against shrinkage, warp age and such other defects for a
period of 3 years.This shall be as per approved drawing, specification
and direction including cost of conveyance, manufacturing painting with
2 coats enamel paint over one coat of primer, cost of labour for all items
of work, machinery, equipment and all other incidental charges with all
lead, lift loading and unloading etc. , complete. The Hollow portion of
the frame to be filled with cement concrete 1:2:4."
7.28 Providing electric welding using carbon electrodes including cost of em 2.50
welding machine, power charges, welding rods, and labour charges for
welding etc., complete as per specification.
7.29 Fabrication supplying and erecting M.S. tubular trusses of all spans as Kgs 110.00
per approved drawing & design with prefabricated steel applications
using quality material and are durable, reliable and corrosion and
abrasion resistant. Welding shall confirm to latest structural welding
code. Quality shall be on various parameters like shape, size, design
gauge ar.d polish. The entire trusses is anchored in RCC column by
using 4 nos of M.S. anchor bolts at each support with 10mm thick
base plate and shoe plate. The work includes cutting, straightening,
40
51. No. Description Unit Rate
Rs. Ps.
7.31 Fabricating, providing and erecting in poiston of M.S. Ornamental Kgs 126.00
security Grill Gate without hot dip using 75 x 12mm M S Flat for alround
frame work with verticals at the centre and horizontal centere support
M S Square of 20 x20 mm of different heights as shown in the drawing
are to be fixed at 16 ems CIC for square bars of full height and at
8cms C I C for bottom rods providing ornamental C I Designers at the
bottom and C I arrows in the midle and top. The entire frame work is to
be fixed by means of expansion bolts to the brick pillars with necesary
drilling holes. the work includes providing two coats of enamel painting
over one coatr of red lead ready mix primer coat etc complete cost of
all labour, painting, erection charges using hoist pulleycranes with all
lead and lift, loading, transporting and unloading using hoist pulley
cranes, scaffolding charges and all other incidental charges required
for successful completion fo the work as per specification and drawings
7.32 Fabricating, providing and erecting in poiston of Hot dip galvanised Kgs 145.00
M.S.Ornamental security Grill Gate using 75 x 12mm M S Flat for
alround frame work with verticals at the centre and horizontal center
support M S Square of 20 x20 mm of different heights as shown in the
drawing are to be fixed at 16 ems CIC for square bars of full height
and at 8cms C I C for bottom rods provide ornamental C I Designers
at the bottom and C I arrows in the middle and top. The entire frame
work is to be fixed by means of expansion bolts to the brick pillars with
necessary drilling holes. the work includes providing two coats of enamel
painting over one coat of red lead ready mix primer coat etc complete
cost of all labour, painting, erection charges using hoist pulleycranes
etc as per specification and drawings.
41
51. No. Description Unit Rate
Rs. Ps.
drillling holes. the work includes providng two coats of enamel painting
over one coatr of red lead ready mix primer coat etc complete cost of
all labour, painting, erection charges using hoist pulleycranes etc as per
specification and drawings.
7.34 Fabricating, providing and erecting in poiston of Hot dip galvanised Kgs 159.00
M S Ornamental security Grill using 75 x 12mm M S Flat for aIround
frame work with verticals at the centre and horizontal centere support
M S Square of 20 x20 mm of different heights as shown in the drawing
are to be fixed at 16 ems C/C for suqare bars of full height and at
8cms C I C for bottom rods providg ornamental C I Designers at the
botom and C I arrows inthe midle and top. The entire frame work is to
be fixed by means of expansion bolts to the brick pillars with necesary
drillling holes. the work includes providng two coats of enamel painting
over one coatr of red lead ready mix primer coat etc complete cost
of all labour, painting, erection charges using hoist pulleycranes with
all lead and lift, loading, transporting and unloading using hoist pulley
cranes, scaffolding charges and all other incidental charges required for
successful completion fo the work as per specification and drawings,
7.35 Providing and fixing M.S. Hand railing for Balcony/Staircase etc., Sqm 2,646.00
with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm
M.S. square rod placed vertically, spaced at 1OOmm at regular intervals
of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced
at equal interval. These assembly is fixed to concrete by using expansion
bolts and welding the same to reinforcement bars and making good the
surface. All the joints and sections hould be cut to length, welded and
grinded wherever necessary etc., complete . The work includes cost
of all materials, labour charges for all items of work, hire charges for
welding, cutting and grinding equipment, and electricity charges, etc.,
complete as per specification and drawing.
7.36 Providing and fixing M.S. Grill over existing compound wall as per Sqm 5,224.00
using 16mm x 16mm M.S. Square rod at 150mm c/c spacing and 6mm x
40mm M.S. flats at horizontal and 6mm x12mm M.S. flat for ornamental
design and providing shop edge design at the vertex of every vertical
rods, including welding, grinding wherever necessary. All the steel
surface should be thoroughly cleaned free of rust and painted with anti
corrosive paint (shop paint) etc., complete. The work includes cost of all
materials, labour charges for all items of work, hire charges for welding,
cutting and grinding equipment, and electricity charges, etc. , complete
as per specification.
7.37 Providing and fixing M.S. Gate as per Chief Architect Drawing, Sqm 2,934.00
using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to
ornamental shape as shown in the drawing and 35mm x 6mm and 16
x 16mm Square rods for verticals alternatively spaced at 4cms c/c in
two halves and 40mmx6mm M.S. flats for horizontal member and at
the top cast iron spikes are provided at alternate vertical members as
shown in the drawing etc., complete. All the steel surface should be
42
51. No. Description Unit Rate
Rs. Ps.
thoroughly cleaned free of rust and painted with anti corrosive paint
(shop paint) etc., complete. The work includes cost of all materials,
labour charges for all items of work, hire charges for welding, cutting and
grinding equipment, and electricity charges, with lead and lift, loading
and unloading charges, etc., complete as per specification.
7.38 Providing and fixing stainless steel 304 grade for staircase railings, Sqm 6,147.00
balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe
welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel
vertical pipe spaced at 1.20m regular intervals, and 5 Nos of 25mm
dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm
dia hollow pipe. The entire assembly is fixed to staircase concrete by
using expansion bolts by drilling concrete etc. , complete including cost
of materials, labour, HOM of machineries and electrical charges, etc. ,
complete as per specifications.
7.39 Providing and fixing 304- grade stainless steel hand rails of 14-gauge Sqm 5,821 .00
pipes for Ramps staircase made out of stainless steel hallow pipes,
using 50mm dia for verticals @1.60 mtr c/c fixed tot he ramps or steps
by drilling with bolts and 1OOmm dia MS base plates 1Omm gauge for
fixing of Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes fixed
horizontally for 2-rows top, one pipes fixed with vertical pipes another one
fixed with elbows and 25mm dia pipes are fixed horizontally for 2-rows
below top measure@ equal intervals including cutting, welding , bending
wherever necessary with suitable caps @ tops, bottoms & corners
finishing with mat I shining etc., complete including cost and conveyance
of all materials, labour for all items of work, HOM of equipment with all
lead and lift, loading and unloading, transportation charges and all other
incidental charges etc. , complete as per specification and directions of
the Engineer-in-charge of the work.
Ramps or Staircase for physically challenged.
Note:
1. KSRB 7-14 and KSRB 7-15: Door opening shall only be deleted from the overall
measurements and balance area shall only be considered for payment.
2. Lift charges: The above rates are applicable for Ground and basement floors
only. Add an additional rate of Rs. 5.00/sqm per floor above or below.
43
.A~
.,1200mm etc
Roi!MP a.rt'Me
08eiW4
I~P GRADIENT max 1 In 12
DETAILS OF S.S.HAND AAIUNGS FOR RAMPS FOR PHYSICALLY CISABL.ED
AND ELDERLY PERSONS
ROOFING
45
Sl. No. Description Unit Rate
Rs. Ps.
8.0 ROOFING
8.1 KSRB 8.1 : Providing and fixing in position stone slab roofing Sqm 990.00
10 to 12 ems thick laid to line and level over wooden rafters or R.C.C.
battens, pointing exposed joints with cement mortar 1:4 including cost
of materials, labour, curing complete as per specifications. ( wooden
rafters and R.C.C. battens to be paid seperately)
Specification No. KBS
8.2 KSRB 8.2 : Providing and fixing in position black cuddapah slab I Sqm 549.00
Shahabad slab I Thandur blue slab 4 ems thick for roofing laid to
line and level over wooden rafters or R.C.C. battens pointing exposed
joints with cement mortar 1:4 including cost of materials, labour, curing
complete as per specifications. (wooden rafters and R.C.C. battens to
be paid seperately )
8.3 KSRB 8.3-1 : Providing and laying to required line and slope roofing with Sqm 362.00
corrugated asbestos cement sheet 6mm . thick fixed with galvanised
iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers
over the existing purl ins, rafters and trusses including cost of materials,
labour, complete as per specifications.
Specification No. KBS 8.5
8.4 KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 cum 1,902.00
(1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or
sunken slabs, laid to slope compacting, including cost of materials,
labour, curing complete as per specifications.
8.5 KSRB 8.6-1 : Providing and fixing on wall surface cast iron rain down m 1,097.00
water pipes 75mm dia including filling the joints with spun yarn soaked
in neat cement slurry 1:2 with necessary specials like shoes, bends
and offsets fixed with iron clamps, wall plugs, screws, including cost of
materials, labour, complete as per specifications.
8.6 KSRB 8.3-2 : Providing and laying to required line and slope roofing Sqm 395.00
with semi-corrugated (Trafford ) asbestos cement sheet 6mm. thick
fixed with galvanised iron J or L hooks, bolts and nuts 8mm . dia C.l
plain and bitumen washers, over the existing purlins, rafters and trusses
including cost of materials, labour, complete as per specifications.
8.7 KSRB 8.3-3 Extra for A. C. sheet corrugated I semi-corrugated sheet Sqm 10.00
roofing with vertical sheeting to a pitch exceeding 60 degrees
8.8 KSRB 8.3-4 : Providing and fixing ridges, hips with asbestos cement m 325.00
sheet roofing with G.l. J or L hooks, bolts and nuts 8mm. dia G.l.plain
and bitumen washers, serrated or plain wings, adjustable ridges,
including cost of materials, labour, complete as per specifications.
8.9 KSRB 8.3-5 : Providing and fixing northlight adjustable ridges, hips m 220.00
with asbestos cement sheet roofing with G.l. J or L hooks, bolts and
nuts 8mm. dia G.l.plain and bitumen washers, serrated or plain wings,
adjustable ridges, including cost of materials, labour, complete as per
specifications.
46
Sl. No. Description Unit Rate
Rs. Ps.
8.10 KSRB 8.4-1 : Providing and fixing Mangalore tile roofing using first Sqm 1,201.00
class tiles with necessary special tiles for ridges and hips, teak wood
reepers of size 50x25mm and pointed with cement mortar 1:4 over
the existing rafters including cost of materials, labour, curing complete
as per specifications. Specification No. KBS 8.17
8.11 KSRB 8.4-2 : -do- nandi wood reepers of size 50x25mm Sqm 766.00
8.12 KSRB 8.4-3 : -do- jungle wood reepers of size 50x25mm Sqm 629.00
8.14 KSRB 8.6-3 : Providing and fixing on wall surface asbestos cement rain m 409.00
down water pipes 75mm dia including filling the joints with spun yarn
soaked in neat cement slurry 1:2 with necessary specials like shoes,
bends and offsets fixed with iron clamps, wall plugs, screws, including
cost of materials, labour, curing complete as per specifications.
Specification No. KBS 8.27, 8.28
8.16 KSRB 8.6-5: Providing and fixing on wall surface 2.5 kg I sq.cm H.O.P.E. m 398.00
rain down water pipes 90 mm outer dia approved make and brand
with necessary specials like shoes, bends and offsets fixed with iron
clamps, wall plugs, screws, including cost of materials, labour, curing
complete as per specifications.
8.17 KSRB 8.6-6 : -do- 2.5kg I sq.cm H.D.P.E. rain down water pipes m 478.00
110mm outer dia
8.18 KSRB 8.6-7: Providing and fixing on wall surface 4.0 kg I sq.cm H.D.P.E. m 428.00
rain down water pipes 90 mm outer dia. approved make and brand
with necessary specials like shoes, bends and offsets fixed with iron
clamps, wall plugs, screws, including cost of materials, labour, complete
as per specifications.
8.19 KSRB 8.6-8 : -do- 4.0 kg I sq.cm H.D.P.E. rain down water pipes m 568.00
110mm outer dia
8.20 KSRB 8.7-1 :Providing and fixing in position 10mm thick plaster of Sqm 1,079.00
paris (Gypsum anhydrous) for ceiling flat surface upto a height of
5 m above floor level over aluminium strips 25mm I 6mm with 1Omm
gap in between and reinforced with rabbit wire mesh fixed to metal
frames including cost of materials, labour, curing complete as per
specifications.
47
St. No. Description Unit Rate
Rs. Ps.
8.24 KSRB 8.7-5 : Providing and fixing in position 12mm thick plaster of Sqm 949.00
paris (Gypsum anhydrous) for ceiling rein forced with hessian cloth
flat surface with ceiling tiles up to a height of 5 m above floor level over
aluminium strips 25mm x 6mm and rendered smooth with plaster of paris
including cost of materials, labour, curing complete as per specifications.
8.25 KSRB 8.7-6 : Extra over item No. KSRB 8.7-5 for providing plaster of Sqm/m 44.00
paris (Gypsum anhydrous) ceiling tiles above 5 m height from floor level
8.26 Providing top layer with 12mm thick silica latex plaster with smooth Sqm 360.00
finishing on top surface.
8.27 Providing and fixing 6mm Bronze Multi wall poly carbonate sheet Sqm 2,490.00
for Tubular structure. The work including cost of all materials, labour
charges, and hire charges of machineries for cutting, welding, grinding
and erection equipment, complete as per specification.
8.28 Providing and fixing 15 mm thick densified regular edged eco friendly Sqm 2,000.00
light weight calcium silicate False ceiling tiles of approved texture
spintonelcosmosiHexa or equivalent of size 595 x 595 mm in true
horizontal level suspended on inter locking metal grid of hot dipped
galvanized steel sections (galvanizing @ 120 grams per sqm including
both sides) consisting of main T runner suitably spaced at joints to
get required length and of size 24 x 38 mm made from 0.33 mm thick
(minimum) sheet, spaced 1200 mm centre to centre, and cross T of
size 24 x 28 mm made out of 0.33 mm (minimum) sheet, 1200 mm
long spaced between main T at 600 mm centre to centre to form a
grid of 1200 x 600 mm and secondary cross T of length 600 mm and
size 24 x 28 mm made of 0.33 mm thick (minimum) sheet to be inter
locked at middle of the 1200 x 600 mm panel to form grid of size
600 x 600 mm resting on periphery walls I partitions on a Perimeter wall
angle precioated steel of size 24 x 24 x 3000 mm made of 0.40 mm thick
with 25 mm long dry wall screwes at 230 mm intervals and laying 15 mm
thick densifed edges calcium silicate ceiling tiles of approved texture
(Spintone I Cosmos) in the grid including cutting I making opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors
etc., wherever required, Main T runners ti be suspended from ceiling
using G I slotted cleats of size 25 x 35 x 1.6 mm fuixed to ceiling with
12.5 mm dia and 50 mm long dash fasterners, 4 mm Gl adjustable rods
with galvanized stelllevel clips of size 85 x 30 x 0.80mm spaced at 1200
mm centre to centre along main T bottom exposed with 24 mm of all
T sections shall be pre painted with polyster baked paint for all heights,
as per specifications, drawings and as directed by Engineer in charge.
8.29 Providing and fixing of pre pigmented extruded orange cement roof Sqm 713.00
tiles of size 420mm x 330mm with necessary specials such as Ridges,
Barges and Nails etc. including cast of providing PVC (6.00kgslsq em)
gutters of min 6" radius and down water pipes of 4" dia as per the roof
design on EXISTING MS/WOODEN ROOF or TRUSS. Including cost
of materials, scaffoldings, labour etc., compelte as per specifications.
48
, -I
Sl. No. Description Unit Rate
Rs. Ps.
8.30 Providing and fixing of pre pigmented extruded orange cement roof Sqm 681.00
tiles of size 420mm x 330mm with necessary specials such as Ridges,
Barges and Nails etc. , including cost of providing PVC (6.00kgs/ sqcm)
gutters of min 6" radius and down water pipes of 4" dia as per roof design
on EXISTING CONCRETE SLOPING ROOF SLAB. Including cost of
mortar band, all materials labour as per specifications.
1. Only calcium silicate false ceiling area will be measured from wall to wall.
No deduction shall be made for exposed frames I openings (cut outs) having
area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value
of 0.50 (Minimum )light reflection> 85% non-combustible as per B S 476 part IV,
100% humidity resistance and also having thermal conductivity< 0.043 w/m 0 KC
49
WOODWORK
50
Sl. No. Description Unit Rate
Rs. Ps.
9.1 KSRB 9-1 : Labour for providing Teak wood wrought and putup for cum 3,532.00
purlins, common rafters and similar work including cost of labour, HOM
of machineries complete as per specifications.
Specification No. KBS 9.4
9.2 KSRB 9-2.1 : Providing Honne wood wrought and putup for purlins, cum 96,884.00
common rafters and similar work including cost of materials, labour,
HOM of machineries complete as per specifications.
Specification No. KBS 9.27
9.3 KSRB 9-2.2 : -do- Mathi I Nandi wood wrought and putup cum 80,013.00
9.4 KSRB 9-2.3 : -do- Sal wood wrought and putup for purlins cum 63,141.00
9.5 KSRB 9-2.4 : - do - Jungle wood such as Nerale, Neem wrought cum 47,568.00
and putup
9.10 KSRB 9.4-1 : Providing Teak wood frames of doors, windows, cum 1,85,914.00
clerestory windows, ventilators and other frames , wrought, framed
or assembled including making plaster groves (excluding cost of cement
concrete and side clamps), but including cost of materials, labour, HOM
of machineries complete as per specifications.
Specification No. KBS 9.33
9.20 KSRB 9-7.1 :Providing and fixing in position fully panelled Teak wood Sqm 7,327.00
shutters for doors, styles and rails of 30mm. thick with bottom and
lock rails 180mm wide top rail and styles 1OOmm wide as per drawing
and panels of 25mm thick including cost of materials, labour, HOM of
machineries complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34
51
Sl. No. Description Unit Rate
Rs. Ps.
9.23 KSRB 9-8.1 : - do - Teak wood wood panels of 35mm thick Sqm 6,771.00
9.26 KSRB 9-9.1: Providing and fixing in position Teak wood half panelled Sqm 6,970.00
and half glazed shutters for doors, styles and rails of 40mm. thick with
bottom and lock rails 180mm wide top rail and styles 1OOmm wide as
per drawing and panels of 25mm thick, 4mm thick plain glass, fixed with
beading 15mm wide and thickness to finish with the shutters surface
including cost of materials, labour, HOM of machineries complete as
per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.30 KSRB 9-11.1 : Providing and fixing in position Teak wood half panelled Sqm 5,899.00
and half glazed shutters for doors, styles and rails of 30mm. thick with
bottom and lock rails 180mm wide top rail and styles 1OOmm wide as
per drawing and panels of 25mm thick, 4mm thick plain glass, fixed with
beading 15mm wide and thickness to finish with the shutters surface
including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
9.32 KSRB 9-~2.1 :Providing and fixing in position Teakwood half panelled Sqm 5,566.00
and half glazed shutters for doors, styles and rails of 30mm. thick with
bottom and lock rails 180mm wide top rail and styles 1OOmm wide as
per drawing and panels of 20mm thick, 4mm. thick plain glass, fixed with
52
51. No. Description Unit Rate
Rs. Ps.
beading 15mm wide and th ickness to finish with the shutters surfac?
including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
9.34 KSRB 9-13-1: Providing and fixing in position shutters for doors made Sqm 3,601.00
out of Honne wood styles and rails of 40mm. thick with bottom and
lock rails 180mm wide top rail and styles 1OOmm wide as per drawing
and panels of 18mm th ick of exterior grade Melamine impregnated
prelamination particle board of approved colour on both sides
including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.26.4
9.35 KSRB 9-13-2: - do- on one side Sqm 3,578.00
9.36 KSRB 9-13-3 : Providing and fixing in position shutters for doors made Sqm 3,418.00
out of Honne wood styles and rails of 40mm. thick with bottom and lock
rails 180mm wide top rail and styles 1OOmm wide as per drawing and
panels of 18mm thick of exterior grade plain particle board including cost
of materials, labour, HOM of machineries complete as per specifications.
( excluding cost of fixtures )
Specification No. KBS 9.34, 9.26.3
9.37 KSRB 9-14-1: Providing and fixing in position shutters for doors made out Sqm 3,302.00
of Honne wood styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 1OOmm wide as per drawing and panels
of 18mm thick of exterior grade Melamine impregnated prelamination
particle board of approved colour on both sides including cost of
materials, labour, HOM of machineries complete as per specifications.
( excluding cost of fixtures )
Specification No. KBS 9.34, 9.26.4
9.38 KSRB 9-14-2:- do- one side Sqm 3,358.00
9.39 KSRB 9-14-3: Providing and fixing in position shutters for doors made Sqm 3,357.00
out of Honne wood styles and rails of 35mm. thick with bottom and lock
rails 180mm wide top rail and styles 1OOmm wide as per drawing and
panels of 18mm thick of exterior grade plain particle board including cost
of materials, labour, HOM of machineries complete as per specifications.
( excluding cost of fixtures )
Specification No. KBS 9.34, 9.26.3
9.40 KSRB 9-15-1 : Providing and fixing in position shutters for doors made out Sqm 3,116.00
of Honne wood styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 1OOmm wide as per drawing and panels
of 18mm thick of exterior grade Melamine impregnated prelamination
particle board of approved colour on both sides including cost of
materials, labour, HOM of machineries complete as per specifications.
(excluding cost of fixtures)
Specification No. KBS 9.34, 9.26.3
53
51. No. Description Unit Rate
Rs. Ps.
9.42 KSRB 9-15-3 : Providing and fixing in position shutters for doors made Sqm 2,933.00
out of Honne wood styles and rails of 30mm. thick with bottom and lock
rails 180mm wide top rail and styles 1OOmm wide as per drawing and
panels of 18mm thick of exterior grade Plain particle board including cost
of materials, labour, HOM of machineries complete as per specifications.
(excluding cost of fixtures)
Specification No. KBS 9.34, 9.26.3
9.43 KSRB 9-16.1 :Providing and fixing in position Teak wood fully panelled Sqm 9,431.00
shutters for windows with styles and rails of 35mm. thick, 75mm wide
in two halves with panels of 25mm thick including cost of materials,
labour charges, HOM of machineries complete as per specifications.
(excluding cost of fixtures)
Specification No. KBS 9.34
9.46 KSRB 9-16.4 : Providing and fixing in position fully panelled shutters Sqm 3,647.00
for windows with Honne wood styles and rails of 35mm. thick, 75mm
wide in two halves with panels provided with NUWUD ( MDF) of 25mm
thick including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures )
Specification No. KBS 9.34, 9.26.3
9.47 KSRB 9-17.1 : Providing and fixing in position Teak wood fully panelled Sqm 8,026.00
shutters for windows with styles and rails of 30mm. thick, 75mm wide in
two halves with panels of 20mm thick including cost of materials, labour
charges, HOM of machineries complete as per specifications. (excluding
cost of fixtures)
Specification No. KBS 9.34
9.50 KSRB 9-17.4 : Providing and fixing in position fully panelled shutters Sqm 3,330.00
for windows with Honne wood styles and rails of 30mm. thick, 75mm
wide in two halves with panels provided with NUWUD ( MDF) of 18mm
thick including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.26.3
9.51 KSRB 9-18.1 : Providing and fixing in position Teak wood fully panelled Sqm 7,323.00
shutters for windows with styles and rails of 25mm. thick, 75mm wide
in two halves with panels of 20mm thick including cost of materials,
labour charges, HOM of machineries complete as per specifications.
(excluding cost of fixtures)
Specification No. KBS 9.34
54
Sl. No. Description Unit Rate
Rs. Ps.
9.54 KSRB 9-18.4 : Providing and fixing in position fully panelled shutters Sqm 2,906.00
for windows with Honne wood styles and rails of 25mm. thick, 75mm
wide in two halves with panels provided with NUWUD ( MDF) of 18mm
thick including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.26.3
9.55 KSRB 9-18.5 : - do- NUWUD (MDF) of 12mm thick Sqm 2,845.00
9.56 KSRB 9-19.1 : Providing and fixing in position Teak wood half panelled Sqm 8,048.00
shutters at bottom and half glazed at top for window shutters with styles
and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm
thick, 3mm thick reeded glass for top panels fixed with wooden beading
including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures) Specification
No. Providing and fixing in position Teak wood half panelled shutters at
bottom and half glazed at top for window shutters with styles and rails
of 35mm. thick, 75mm wide in two halves with panels of 25mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including
cost of materials, labour charges, HOM of machineries complete as per
specifications. (excluding cost of fixtures) Specification No. KBS 9.34, 9.42
9.57 KSRB 9-19.2 :-do- Honne wood Sqm 4,425.00
9.58 KSRB 9-19.3 :-do- Mathi/ Nandi wood Sqm 3,844.00
9.59 KSRB 9-19.4 :Providing and fixing in position windows half paneled Sqm 3,699.00
shutters at bottom and half glazed at top for window shutters with
Honne wood styles and rails of 35mm. thick, 75mm wide in two halves
with panels filled with NUWUD ( MDF ) of 18mm thick, 3mm thick
reeded glass for top panels fixed with wooden beading including cost
of materials, labour charges, HOM of machineries complete as per
specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42, 9.26.3
9.60 KSRB 9-20.1 : Providing and fixing in position Teak wood half panelled Sqm 7,170.00
shutters at bottom and half glazed at top for window shutters with styles
and rails of 30mm. thick, 75mm wide in two halves with panels of 20mm
thick, 3mm thick reeded glass for top panels fixed with wooden beading
including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures) Specification
No. KBS 9.34, 9.42
9.63 KSRB 9-20.4 : Providing and fixing in position windows half paneled Sqm 3,191.00
shutters at bottom and half glazed at top for window shutters with Honne
wood styles and rails of 30mm. thick, 75mm wide in two halves with
55
Sl. No. Description Unit Rate
Rs. Ps.
panels filled with NUWUD (MDF) of 18mm thick, 3mm thick reeded glass
for top panels fixed with woodenbeading including cost of materials,
labour charges, HOM of machineries completeas per specifications.
(excluding cost of fixtures)
Specification No. KBS 9.34,9.42, 9.26.3
9.64 KSRB 9-21 .1 : Providing and fixing in position half panelled shutters Sqm 6,573.00
at bottomand half glazed at top for window shutters with Teak wood
styles and rails of25mm. thick, 75mm wide in two halves with panels
of 20mm thick, 3mm thick reeded glass for top panels fixed with
wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.67 KSRB 9-21.4 : Providing and fixing in position windows half paneled Sqm 2,944.00
shutters at bottom and half glazed at top for window shutters with Honne
wood styles and rails of 25mm. thick, 75mm wide in two halves with
panels filled with NUWUD (MDF) of 18mm thick, 3mm thick reeded glass
for top panels fixed with wooden beading including cost of materials,
labour charges, HOM of machineries complete as per specifications.
(excluding cost of fixtures) Specification No. KBS 9.34, 9.42, 9.26.3
9.68 KSRB 9-22.1 : Providing and fixing in position fully glazed for windows Sqm 5,669.00
shutters with Teak wood styles and rails of 35mm. thick 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.70 KSRB 9-23.1 : Providing and fixing in position fully glazed for windows Sqm 5,142.00
shutters with Teak wood styles and rails of 30mm. thick, 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
including cost of materials, labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.72 KSRB 9-24.1 : Providing and fixing in position fully glazed for windows Sqm 4,615.00
shutters with Teak wood styles and rails of25mm. thick, 75mm wide in
single shutters with 4mm thick plain glass fixed with wooden beading
including cost of materials,labour charges, HOM of machineries
complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
56
Sl. No. Description Unit Rate
Rs. Ps.
9.74 KSRB 9-25.1 :Providing and fixing in position fully glazed shutters for Sqm 6,857.00
ventilators side hung or central pivoted with Teak wood styles and rails
of 30mm. thick, 50mm wide and central divider of 30mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 1Omm wide flushed to the
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.77 KSRB 9-26.1 : Providing and fixing in position fully glazed shutters for Sqm 4,001.00
ventilators side hung or central pivoted with Teak wood styles and rails
of 25mm. thick, 50mm wide and central divider of 25mm. wide, 3mm thick
reeded glass fixed with wooden beading of size 1Omm wide flushed to the
thickness of the frame including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42
9.80 KSRB 9-27.1 : Fixing of door frame in an existing opening including Nos 1,054.00
embeeding frame in floor and walls after cutting masonry for holdfasts
for embedding holdfast in cement concrete 1:3:6 of 20mm and down
size granite metal painting two coats of coal tar to sides of frame, making
good the damages to walls and floor as required and disposal of the
debries with lead upto 50 m. including cost of materials, labour charges,
complete as per specifications.
57
Sl. No. Description Unit Rate
Rs. Ps.
sheet metered cut at corners & jointed 2 No.s of 150mm long brackets
of 15x15mm M.S Square tube, the entire door frame to be reinforced
with 19x19mm M.S Square tube of 19 gauge. The door frame to be
fixed to the wall using M.S. Screws of 65/80mm size complete as per
manufacturers specification & direction of Engineer-in-charge.
9.86 PVC DOOR SHUTTER : Supply and fixing of door shuttersmade of rigid Sqm 1,760.00
PVC extruded hollow section of 20mm x 200mm with the wall thickness
of 1.0mm + /0.1 mm equally divided into 4nos with tongue and groove
locking arrangements. The shutter frame is made of 58x24 mm with
the wall thickness of 1.5mm+/-0.15mm section metricut and joined at
4 corners with 125mmx225mm plastic brackets. The shutter shall be
horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons
shall be reinforced inside the door shutter during the fabrication of the
door shutter at those points wherever the hardware is fixed on to the
door shutter.
9.87 Supply and fixing of door shutters made of rigid PVC extruded hollow Sqm 1,950.00
section (Nandi or equivalent) of 20mmx200mm with the wall thickness
of 1.0mm+/-0.1 mm equally divided into 4nos with tongue an groove
locking arrangements. The shutter frame is made of 30mm x 79mm with
the wall thickness of 1.5mm+/-0.15mm section metric cut and joined at
4 corners with 125mmx225mm plastic brackets. The shutter shall be
horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons
shall be reinforced inside the door shutter during the fabrication of the
door shutter at those points wherever the hardware is fixed on to the
door shutter.
9.88 Supply and fixing of door frame made of hollow extruded PVC Section m 230.00
having dimension of 40x57mm with the wall thickness of 2mm+/-0.2mm
duly reinforced with seasoned wood plank at the hinges side. The door
frame top 2corners shall be metric cuUwelded.
58
51. No. Description Unit Rate
Rs. Ps.
9.89 Supply and fixing of door frame made of hollow extruded PVC Sectit:;~ m 220.00
having dimension of 40x46mm with the wall thickness of 2mm+/-0.2mm
duly reinforced with seasoned wood plank at the hinges side. The door
frame top 2 corners shall be metric cuUweilded .
9.90 Providing and fixing factory made splendoor of solid core single
leaf rigid composite polymer laminated sal wood , door shutter of
required thickness, manufactured out of solid core door conforming to
IS 2202 (Part-1) 1991 , laminated with 0.8 mm thick polymer, termite,
water resistant and fire retardant with superior gluing based on vacuum
lamination technology and with various pre moulded design on both
faces conforming to IS 6307-1985, using adhesive conforming to IS
4835-1979 and door shuters tested in conformation to IS 4020-1994.
The finish of shutters will be TEAK/CEDAR/ROSE WOOD/WALNUT,
plain colurs WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of
fixtures and inclusive of supply of shutters to respective work spot.
9.91 Providing and fixind of factory made 30mm P.V.C rigid foam PANEL Sqm 2,520.00
DOORS made from MS tube of 19 guage, size of 19mm x 19mm and
covered with heat moulded PVC C Channel of 5 mm thick and width
of 50mm to form styles and rails. The inner panel should be inserted in
between the frame with 5mm thick PVC rigid foam sheet, welded/sealed
to the styles and rails along with 5mm PVC, beeding on all and either
sides. The vertical tubes may be filled with suitable wood material to
further enhance the screw holding capacity
9.92 Providing and fixing PVC Hollow Door Frame of the size 50x47mm m 390.00
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC
foam sheet, mitre cut at two corners and joined with 2 Nos. of 150mm
long brackets of 15x15mm M.S. Square tube. The two vertical door
profiles are to be reinforced with 19x19 mm M.S. Square tube of 19
gauge, EPDM rubber gasket weather seal to be provided through out
the frame. The door screws through the frame by using PVC fasteners.
A minimum of 4 Nos of screws to be provided for each vertical member
& minimum 2 Nos. for horizontal member.
9.93 Providing and fixing factory made single leaft rigid GRP Sandwich Sqm 3,200.00
composite door shutter of 32mm thick, laminated with two GRP
skins with wood grain finish, fabricated using U.V-stabilized lsopthalic
Gelcoat and on layer of 45 gsm E-Giass Chopped strand Mat (CSM),
impregnated with orthopthalic polyster resin. The thickness of the skins
shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural
foam panel of 29mm thickness and a density of 20 Kg/m3 shall be
used as core material. Wooden reinforcements made of Seasoned
Salwood block of cross section not less than 28mmx32mm and also
necessary salwood reinforcements for fixing the metal fittings such
as tower bolts, aldrops, handles, etc, shall be provided. A structural
59
Sl. No. Description Unit Rate
Rs. Ps.
adhesive compatible with EPS foam shall be used for bonding the
core material, the Salwood reinforcement and the skins. The material
and process for manufacturing the door shutters shall confirm to
RV/TIFAC Composites Design centre Standards and specifications
and the door shutters tested in confiramation to IS 4020-1994. The
finish of shutter will be plain colour White/Ivory/Beige/Light Grey
or any other colour using high quality pigments. Exclusing cost of
fixtures and inclusive of supply of shutters to respective work spot.
9.94 Providing and fixing factory made single leaf rigid GRP Sandwich Sqm 4,000.00
composite door shutter of 40 mm thick, laminated with two GRP
skins with wood grain finish, fabricated using U.V-stabilized lsopthalic
Gelcoat and one layer of 450 gns E-Giass Chopped Strand Mat
(CSM), impregnated with orthopthalic polyester resin. The thickness
of the skins shall not be less than 1.5mm. Expanded Polystyrene
(EPS) structural foam panel of 37mm thickness and a density of
20 Kg/m3 shall be used as core material. Wooden reinforcements
made of Seasoned Salwood block of cross section not lessthan
36mmx32mmand also necessary salwood reinforcements for fixing
the metal fittings such as tower bolts, aldrops, handles, etc. shall be
provided. A structural adhesive compatible with EPS foam shall be
used for bonding the core material, the salwood reinforement and the
skins. The material and process for manufacturing the door shutters
shall confirm to RV-TIFAC Composites Design Centre Standards
and specifications and the door shutters tested in confiramation to IS
4020-1994. The finish of shutter will be plain coulur White/IVORYI
Beige/Light Grey or any other colour using high quality pigments.
Excluding cost of fixtures and inclusive of supply of shutters to
respective work spot.
9.95 Providing and fixing 65mmx90mm GRP Doorframe fabricated m 480.00
using E-Giass Chopped Strand Mat (CSM). U.V-stabilized
lsopthalic Gelcoat and lsopthalic resin. The thickness of the GRP
skin shall not be less than 2.0 mm. The doorframe consists of four
segmens, which are provided with plug-in-socket arrangement
in-situ in the mould. The segments are plugged in and are joined
together by means of screws. The GRP frame shall be provided
with wooden reinforcement of 6 locations fro high screw holding
capacity for fixing metallic hold fast and shall be consolidated by
filling with medium density foam/Plaster with fibre reinforcement.
Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold
fast shall be provided with the frame.
9.96 Providing and fixing 65mmx125mm GRP Doorframe fabricated m 565.00
using E-Giass Chopped Strand Mat (CSM) U.V- stabilized lsopthalic
Gelcoat and lsopthalic resin. The thickness of the GRP skin shall
not be less than 2.0mm. The doorframe consists of four segments,
which are provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined together by
means of screws. The GRP frame shall be provided with wooden
reinforcement on 6 locations for high screw holding capacity for
fixing metalling hold fast and shall be consolidated by filling with
medium density foam/Plaster of Paris with fibre reinforcement. Six
60
Sl. No. Description Unit Rate
Rs. Ps.
9.100 Providing and fixing require line and slope roofing with semi-corrugated Sqm 850.00
PVC roofing sheets of industrial profile 250/40 in 2.00 mm thick white
colour, fire and heat resistant having width of 1.054 mtrs. fixed with
self tapping screws with washers, over the existing purlins, rafters and
trusses including cost of materials, labour, complete as per specification.
9.101 Providing and fixng Teak Wood Hand railing to stair case using bulusters rmt 9,192.00
of sections 40mm x 25mm as per design drawing No: 11863 I railings
issued by the Principal Chief Architect and fixing it to the steps using anchor
bolts and necessary adhesive materiasl and fixing T.W. handrail of section
75 x 75 mm to bulusters and finishing the same by using colourless polish
etc., complete. The work includes cost of all materials, labour charges for
all items of work, hire charges for welding, cutting and grinding equipment,
and electricity charges, with lead and lift, loading and unloading charges,
etc., complete as per drawing and specification
9.102 Providing Maranthi wood frames of doors, windows, clear story windows, cum 50,841.00
ventilation and other frames, wrought, framed or assembled including
making plaster grooves (excluding cost of concrete cement and side
clamps) but including cost of materials, labours, HOM of machineries
complete as per specifications.
9.103 Providing & Fixing Mosquito mesh shutters made out of Stainless Sqm 3,200.00
Steel mosquito proof mesh with 95% & above visibility which is fixed to
the powder coated aluminium frame 32mm thick of approved shade.
The work including fixing the shutters with necessary accessories, to
complete as per specification including the labour charges for fixing the
shutter to the existing frames.
61
Sl. No. Description Unit Rate
Rs. Ps.
9.104 Providing & Fixing Mosquito mesh shutters made out of Stainless Sqm 2,600.00
Steel mosquito proof mesh with 95% & above visibility which is fixed to
the powder coated aluminium frame 20mm thick of approved shade.
The work including fixing the shutters with necessary accessories, to
complete as per specification including the labour charges for fixing the
shutter to the existing frames.
9.106 Providing and fixing flush door shutter made out of solid core black
board type, well seasoned chemically treated hard wood battens and
internal frame with minimum 45 mm wide wooden frame all-round door
shutters covered with cross bonded wooden sheets (core veneer)
hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-1) 1991 .
From manufacturer (Factory) complete as per specification.
9.106.1 - do - 30mm thick both side teak Sqm 3,420.00
9.106.2 - do - 30mm thick one side teak and one side commercial Sqm 2,875.00
9.106.3 - do - 30mm thick both side commercial Sqm 2,026.00
9.106.4 - do - 35mm thick both side Teak Sqm 3,662.00
9.106.5 - do - 35mm thick one side teak and one side commercial Sqm 3,068.00
9.106.6 - do - 35mm thick both side commercial Sqm 2,269.00
9.106.7 - do - 40mm thick both side teak Sqm 3,784.00
9.106.8 - do - 40mm thick one side teak and one side commercial Sqm 3,299.00
9.106.9 - do - 40mm thick both side commercial Sqm 2,511.00
9.107 Providing and fixing to the existing door frames, factory made single Sqm 2,356.00
leaf HDF - Teak Veneer skin sandwich composite door shutter of
40 mm thickness made out of honeycomb of 34 mm thick and surrounded
by good quality properly seasoned wooden reinforcements of size
33 mm X 65 mm for fixing fixtures such as tower bolts, aldrops, handles
etc., and laminated on either sides with 3 mm thick wood grain finish
good quality HDF-Teak Veneer skins, using structural bonding material
compatible with honeycomb core, wood and HDF- Teak Veneer skin and
the whole assembly is bonded together at high temperature and pressure
using 650 tonnage heated compression moulding press.AII the four sides
of the door shutter are applied with two coats of UV stabilized polyester
resin putty to completely cover and seal the wood from water ingression.
The material and process for manufacturing the door shall confirm to
RV-TIFAC composites design centre standards and specification and
the door shutters tested in confirmation to IS4020-1994, including cost
of all materials, labour charges, HOM and machineries etc. complete
but excluding the cost of fixtures.
9.108 Providing and fixing to the existing door frames, factory made Sqm 1,716.00
single leaf HDF skin sandwich composite door shutter of 40 mm
62
Sl. No. Description Unit Rate
Rs. Ps.
9.109 Providing and fixing to the existing door frames, factory made single Sqm 2,384.00
leaf HDF - Teak Veneer skin sandwich composite door shutter of
32 mm thickness made out of honeycomb of 29 mm thick and surrounded
by good quality properly seasoned wooden reinforcements of size
28 mm X 40 mm for fixing fixtures such as tower bolts, aldrops, handles
etc., and laminated on either sides with 3 mm thick wood grain finish
good quality HDF- Teak Veneer skins, using structural bonding material
compatible with honeycomb core, wood and HDF- Teak Veneer skin and
the whole assembly is bonded together at high temperature and pressure
using 650 tonnage heated compression moulding press. All the four sides
of the door shutter are applied with two coats of UV stabilized polyester
resin putty to completely cover and seal the wood from water ingression.
The material and process for manufacturing the door shall confirm to
RV-TIFAC composites design centre standards and specification and
the door shutters tested in confirmation to 184020-1994, including cost
of all materials, labour charges, HOM and machineries etc. complete
but excluding the cost of fixtures.
9.110 Providing and fixing to the existing door frames , factory made single Sqm 1,610.00
leaf HDF skin sandwich composite door shutter of 32 mm thickness
made out of honeycomb of 26 mm thick and surrounded by good quality
properly seasoned wooden reinforcements of size 25 mm X 65 mm for
fixing fixtures such as tower bolts, aldrops, handles etc., and laminated
on either sides with 3 mm thick wood grain finish good quality HDF
skins, using structural bonding material compatible with honeycomb
core, wood and HDF skin and the whole assembly is bonded together at
high temperature and pressure using 650 tonnage heated compression
moulding press. The HDF Composite door surface is coated with 2 coats
of high quality primer.The front and back surfaces of the door shutter
63
Sl. No. Description Unit Rate
Rs. Ps.
and all the four sides are painted with two coats of high quality paint
of any desired colour. The material and process for manufacturing the
door shall confirm to RV-Tl FAG composites design centre standards and
specification and the door shutters tested in confirmation to 154020-1994,
including cost of all materials, labour charges, HOM and machineries
etc. complete but excluding the cost of fixtures.
9.111 Providing and fixing to the existing door frames, factory made single Sqm 1,854.00
leaf HDF skin sandwich composite door shutter of 32 mm thickness
made out of honeycomb of 26 mm thick and surrounded by good quality
properly seasoned wooden reinforcements of size 25 mm x 65 mm for
fixing fixtures such as tower bolts, aldrops, handles etc. , and laminated
on either sides with 3 mm thick wood grain finish good quality HDF
skins, using structural bonding material compatible with honeycomb
core, wood and HDF skin and the whole assembly is bonded together at
high temperature and pressure using 650 tonnage heated compression
moulding press. The HDF Composite door surface is coated with 2 coats
of high quality primer. The front and back surfaces of the door shutter
and all the four sides are painted with two coats of high quality paint
of any desired colour. The material and process for manufacturing the
door shall confirm to RV-TIFAC composites design centre standards and
specification and the door shutters tested in confirmation to 154020-1994,
including cost of all materials, labour charges, HOM and machineries
etc. complete but excluding the cost of fixtures.
Note:
1. Lift charges : The above rates are applicable for Ground floor only.
An additional rate of Rs. 3.00/sqm per floor may be added for every
additional floor above or below for items vide Sl. No. 9.14 to 9.99,
9.101, 9.102 and 9.111.
64
WATER PROOFING
65
Sl. No. Description Unit Rate
Rs. Ps.
10.1 KSRB 10-2 : Providing and laying in position Yelahanka tiles of size Sqm 804.00
250 x 250mm of approved quality and make, over a bed of cement
mortar 1:3 an average thickness 25mm over weather proof course and
pointed with cement mortar 1:3 mix with red oxide including curing cost
of materials, labour complete as per specifications.
Specification No. KBS
10.2 KSRB 10-3 : Providing and laying integral cement based waterproofing Sqm 904.00
treatment including preparation of surface as required for treatment
of roofs, balconies, terraces etc., consisting of following application .
(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/
sqm of cement admixed with proprietary water proofing compound
conforming to IS:2645 over the RCC slab after cleaning the surface
before treatment. (b) Laying cement concrete using broken brick bats
25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with
proprietary water proofing compound conforming 15:2645 over 20mm
thick layer of cement mortar 1:5 admixed with proprietary water proofing
compound to required slope and treating similarly the adjoining walls
upto 300mm height including rounding off junctions of walls and slabs.
(c) After two days of proper curing, applying a second coat of cement
lurry admixed with proprietary water proofing compound (d) Finishing
the surface with 20mm thick joint less cement mortar of mix 1:4 admixed
with proprietary water proofing compound and finally finishing the
surface with trowel and neat cement slurry and making of 300x300mm
square. (e) The whole terrace so finished shall be flooded with water
for a minimum period of two weeks for curing and for final test including
cost of materials, labour complete as per specifications.
10.3 KSRB 10-4 : Providing and laying four courses water proofing Sqm 309.00
treatment with bitumen felt over roof consisting of first and third
courses of blown and I or residual bitumen applied hot at 1.45 kg I sqm
of area for each course second course of roofing felt Type - 3 grade-1
(hessian based self finish bitumen felt) and forth and final course of stone
grit 6mm and down size or pea sized gravel spread at 0.06 cum. I sqm
including preparation of surface but excluding grading complete with
bitumen felt (hessian based) Type - 3 grade-1 blown or I and residual
bitumen applied hot 1.4 kg I sqm including cost of materials, labour
complete as per specifications. KBS 10.4.3
10.4 KSRB 10-5 : Providing and laying six courses water proofing Sqm 550.00
treatment with bitumen felt over roof consisting of first, third and
fifth courses of blown and I or residual bitumen applied hot at 1.45 kg,
1.2kg and 1.7kg I sqm of area respectively, second and fourth courses
of roofing felt Type -2 grade-I (fibre based self finish bitumen felt) and
sixth and final course of stone grit 6mm and down size or pea sized
gravel spread at 0.06 cum. I sqm including preparation of surface,
excluding grading but including cost of materials, labour complete as
per specifications. KBS 10.4.3
66
St. No. Description Unit Rate
Rs. Ps.
10.9 Providing and applying Polymer based water proofing slurry having Sqm 3,100.00
chemical resistance properties, capable of withstanding a Temperature
of 200 DegC for Protective Negative coating for Water Dampness &
seepages, comprising of Portland cement, Lime stone, Silica sand,
Alumina cement, sodium aluminate in the form of powder composition
at 3.30 kgs mixed with 1.0 liter of Acrylic emulsion, applied on
0.64 Sqm area/liter of slurry on a cleaned surface free of loose materials
etc, complete on all masonry structures, overhead tank, sump tank,
water closet areas, sunken slab and other such areas, filling tile joints,
capable of Self curing within 3 to 4 hours of its application in normal
atmospheric condition, including cost of all materials, labour charges,
HOM and machineries etc., complete.
10.10 Providing and applying Polymer based instant running water leak arrester KG 2,100.00
in civil works using mixture capable of withstanding a temperature
of 200 Deg C comprising of Portland cement, Lime stone, Silica
sand, Alumina cement, Sodium aluminate, Calcium oxide in the form
of powder composition of 1.00kg mixed with 250ml water, applied on
a cleaned surface free of loose materials, dust etc., for cavities and
also for damaged areas in all masonry and concrete structures, for
rapid hardening and leak arresting including cost of all materials, labour
charges, HOM and machineries etc., complete.
10.11 Providing and applying water proofing in two coats of 300 microns Sqm 900.00
thickness on all surfaces like concrete, Metal, Plastic, Asbestos, Wood,
Cloth canopy using Heat refractive compound made out of Vinyl Acetate
copolymer latex, Water, Titanium Dioxide, Barium meta borate, Ceramic
Microsphere powder, Mica, Propylene Glycol in suitable proportions and
the surface to be treated should be cleared of loose particles/dust/fungus
etc and kept dry before the application of heat refractive compound,
including cost of all materials, labour charges, HOM and machineries
etc., complete.
Note:
1. It can be followed by other operations like screeding, tiling etc.,
after 1 hour. DO NOT FORCIBLY REMOVE composite waterproofing
compound ON TILES IF ANY.
68
DRAINAGE WORK
69
Sl. No. Description Unit Rate
Rs. Ps.
11.1 KSRB 12-1 .1 : Providing and laying in position to required level or m 229.00
slope 1OOmm internal diameter salt glazed stoneware pipes grade
A and jointing with stiff mixture of cement mortar in proportion of 1:1,
testing of pipes and joints,including cost of materials, labour charges
complete as per specifications.
Specification No. KBS 12.2.5 I 12.7
11.1 0 KSRB 12-2.1 : Providing and laying in position plain cement concrete m 232.00
M7.5 40mm and down size graded granite metal, machine mixed
concrete laid in layers not exceeding 15 ems thick, well compacted,
for 1OOmm internal diameter stoneware pipes including cost of
materials, labour charges, HOM of machinery, curing complete as per
specifications
Specification No. KBS 4.1 I 4.2
11.28 KSRB 12-4.1 : Providing and laying in position plain cement concrete m 725.00
of M 7.5 using 40mm and down size graded granite I trap metal for
surrounded encasing 100mm internal diameter stoneware pipes,
concrete machine mixed well compacted including cost of materials,
labour charges, form work, HOM of machinery, curing complete as per
specifications.
Specification No. KBS 4.1 I 4.2
11.29 KSRB 12-4.2: -do -150mm m 881.00
11.30 KSRB 12-4.3 : - do - 200mm m 1,027.00
11.37 KSRB 12-5.1 : Constructing brick masonry circular type manhole Nos 13,577.00
0.91 m internal dia at bottom 0.91 m deep and 0.56m dia at top with
table moulded non-modular bricks of 50 class designation 50 in cement
mortar 1:4, inside cement plastered 12mm thick with cement mortar
1:3, finished with a floating coat of neat cement, foundation concrete
M 10 using 40mm and downsize granite metal and making necessary
channel in cement concrete M 50 with 20mm and downsize granite metal
finished with a floating coat of neat cement, with S.F.R.C. cover and
frame (heavy duty, HD-20 grade designation) 560mm internal diametre
confirming IS :12592, total weight cover and frame to be not less than
182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken
granite metal, providing and removing centering, shuttering including
cost of materials, labour charges, HOM of machineries complete as per
specifications. (Excavation, footrests and 12mm thick cement plaster
on the external surface shall be paid separately)
Specification No. KBS 12.4
71
Sl. No. Description Unit Rate
Rs. Ps.
11.39 KSRB 12-5.3 : Constructing brick masonry circular type manhole Nos 26,124.00
1.22 m internal dia at bottom 1.68 m deep and 0.56m dia at top, with
table moulded and non modular bricks of class designation 50 in cement
mortar 1:4, inside cement plaster 12mm thick with cement mortar 1:3,
finished with a floating coat of neat cement, foundation concrete M 10
using 40mm and down size granite metal and making necessary channel
in cement concrete M 15 with 20mm and down size granite metal,
finished with a floating coat of neat cement, with S.F.R.C. cover and
frame (heavy duty, HD-20 grade designation) 560mm internal diameter
confirming to IS :12592, total weight length of cover and frame to be
not less than 182 kg, fixed in cement concrete M 15 20mm and down
size broken granite metal, providing and removing centering, shuttering
including cost of materials, labour charges, HOM of machineries
complete as per specifications. (Excavation, footrests and 12mm thick
cement plaster on the external surface shall be paid separately)
Specification No. KBS 12.4
11.43 KSRB 12-5.7 : Constructing circular type manhole 1500mm internal Nos 44,031.00
dia at bottom 2.50m deep, 525mm dia at top, in brick masonry with
1:5 cement mortar, cement plaster 1:3, finish with a floating coat of neat
cement, RCC 1:2:4 top slab using 20mm and down size granite metal,
foundation concrete M 7.5 using 40mm and down size granite metal and
making channels in cement concrete M 15 using 20mm and down size
granite metal, neatly finished curing, fixing Cl cover complete including
cost of materials, labour charges, HOM of mechineries complete as per
specifications. (Excavation, footrests and 12mm thick cement plaster
on the external surface shall be paid separately)
Specification No. KBS 12.4
72
Sl. No. Description Unit Rate
Rs. Ps.
11.44 KSRB 12-6.1 : Providing 20mm square M.S footrest and fixing in Nos 246.00
manhole with M 10 cement concrete block of 20x20x1 Ocms, using
20mm and down size metal of size including cost of materials, labour
charges, curing complete as per specifications.
Specification No. KBS 12.4.6
11.45 KSRB 12-6.2 : Providing 20mm round M.S footrest and fixing in manhole Nos 212.00
with M 10 cement concrete block of 20x20x1 Ocms, using 20mm and
down size metal of size including cost of materials, labour charges,
curing complete as per specifications.
Specification No. KBS 12.4.6
11.46 KSRB 12-6.3 : Providing cast iron footrest and fixing in manhole with Nos 230.00
M 10 cement concrete block of 20x20x1 Ocms, using 20mm and down
size metal of size including cost of materials, labour charges, curing
complete as per specifications.
Specification No. KBS 12.4.6
11.47 KSRB 12-7.1 : Making connection of drain or sewer line of size 100 to Nos 1,734.00
230mm external dia with existing manhole including breaking into and
making good the walls, floors with cement concrete M 15 with 20mm
and downsize granite metal, cement plastered on both sides of mix
1:3, finished with a floating coat of neat cement, and making necessary
channels for the drain, including cost of materials, labour charges,
curing complete as per specifications.
Specification No. KBS
11.48 KSRB 12-7.2:- do- 250 to 300mm Nos 2,276.00
11.49 KSRB 12-7.3:- do- 350 to 450mm Nos 2,996.00
11.50 KSRB 12-8.1 : Constructing brick masonry inspection chamber Nos 7,041.00
455x610mm, and 450mm depth, (clear inside dimension) for single
pipeline, using table moulded non-modular bricks of class designation
50 in cement mortar 1:5, C.l cover withframe (light duty) 455x61 Omm
internal dimensions, total weight of cover with frame to be not less
than 38 kg (weight of cover 23kg and weight of frame 15 kg) R.C.C.
top slab with cement concrete M 15 with 20mm and downsize granite
metal, foundation concrete M 5 with 40mm and downsize granite metal
inside plastering 12mm thick with cement mortar 1:3, finish smooth
with a floating coat of cement on walls and bed concrete complete as
per standard design including cost of materials, labour charges, curing
complete as per specifications.
Specification No. KBS
11 .50.1 -do- 600x600mm and 450mm depth (clear inside dimension) for Nos. 8,954.00
single pipeline , using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.l cover withframe (light duty)
600x600mm
11.50.2 - do- 450x450mm and 450mm depth (clear inside dimension ) for Nos. 5,344.00
single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.l cover withframe (light duty)
450x450mm
73
Sl. No. Description Unit Rate
Rs. Ps.
11 .50.3 - do - 450x300mm and 450mm depth ( clear inside dimension ) Nos. 3,839.00
for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.l cover withframe (light duty)
450x300mm
11 .50.4 - do - 230x150mm and 450mm depth ( clear inside dimension ) Nos. 1,592.00
for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C. I cover withframe (light duty)
230x150mm
11.51 KSRB 12-8.1.1 : Extra for item no. KSRB 12-8.1 depth beyond 450mm Each 755.00
and brick masonry chamber with table moulded non modular bricks of
class designation 50 in cement mortar 1:5 for every 150mm depth or
part thereof including cost of materials, labour charges, curing complete
as per specifications.
Specification No. KBS
11.52 KSRB 12-8.2 : Constructing brick masonry inspection chamber Each 7,791.00
500x700mm, and 450mm depth, (clear inside dimension ) for pipeline
with one or two inlets, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C. I cover with frame (light duty)
455x61 Omm internal dimensions, total weight of cover with frame to be
not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg )
R.C.C. top slab with cement concrete M 15 with 20mm and downsize
granite metal , foundation concrete M 5 with 40mm and downsize
granite metal inside plastering 12mm thick with cement mortar 1:3,
finished smooth with a floating coat of cement on walls and bed concrete
complete as per standard design including cost of materials, labour
charges, curing complete as per specifications.
Specification No. KBS
11.53 KSRB 12-8.2.1 : Extra for item no. KSRB 12-8.2 depth beyond 450mm Each 837.00
and brick masonry chamber with table moulded non-modular bricks of
class designation 50 in cement mortar 1:5 for every 150mm depth or
part thereof including cost of materials, labour charges, curing complete
as per specifications.
Specification No. KBS
11 .54 KSRB 12-8.3 : Constructing brick masonry inspection chamber Each 8,817.00
600x850mm, and 450mm depth, (clear inside dimension ) for pipeline
with three or more inlets, using table moulded non-modular bricks of
class designation 50 in cement mortar 1:5, C.l cover with frame (light
duty) 455x61 Omm internal dimensions, total weight of cover with
frame to be not less than 38 kg ( weight of cover 23kg and weight of
frame 15 kg ) R.C.C. top slab with cement concrete M 15 with 20mm
and downsize granite metal , foundation concrete M 5 with 40mm and
downsize granite metal inside plastering 12mm thick with cement mortar
1:3, finished smooth with a floating coat of cement on walls and bed
concrete complete as per standard design including cost of materials,
labour charges, curing complete as per specifications.
Specification No. KBS
74
St. No. Description Unit Rate
Rs. Ps.
11.55 KSRB 12-8.3.1 : Extra for item no. KSRB 12-8.3 depth beyond 450mm Each 968.00
and brick masonry chamber with table moulded non-modular bricks of
class designation 50 in cement mortar 1:5 for every 150mm depth or
part thereof including cost of materials, labour charges, curing complete
as per specifications.
Specification No. KBS
11.56 Providing and fixing unplasticised PVC pipes 10.00 kg/sq.cm working
pressure chemp plast I Wavin or equivalent make with pipe
fittings , clips, making good the floor, including cost of all materials,
labour charges, HOM of equipment and testing complete as per
specifications.
11.56.1 -do- with 90mm outer dia m 481.00
11.56.2 -do- with 11 Omm outer dia m 688.00
11.56.3 -do- with 140mm outer dia m 1,140.00
11.56.4 -do- with 160mm outer dia m 1,450.00
11.56.5 -do- with 200mm outer dia m 1,838.00
11.56.6 -do- with 225mm outer dia m 2,225.00
11.56.7 -do- with 250mm outer dia m 3,388.00
11 .56.8 -do- with 280mm outer dia m 4,292.00
11 .56.9 -do- with 315mm outer dia m 5,455.00
Note:
1. The items vide SI.No. 11.10 to 11.18 are for cement concrete bedding
for stoneware pipes.
2. The items vide SI.No. 11.19 to 11.27 are for haunching of stoneware
pipes with cement concrete.
3. The items vide SI.No. 11.28 to 11.36 are for Haunching of stoneware
pipes with cement concrete surrounded encasing.
4. The walls of manholes and inspection chambers shall be built of one
brick thickness i.e. 112.5mm for depths upto 4.25m. Below a depth of
4.25m in ordinary subsoil the wall thickness shall be increased to one
and half brick i.e. 168.75mm and at 9. 75m below ground two brick thick
i.e. 225mm walls shall be built.
75
SANITARY WORK
76
51. No. Description Unit Rate
Rs. Ps.
12.1 KSRB 11-1 : Providing and fixing white vitreous china clay, water pan 3,454.00
closet Indian type (Squatting pan) of size 580mm with footrests,
1OOmm S or P trap, "10 litre low level, P.V.C flushing cistern (all are
approved make) with fittings, C.l I M.S brackets, 32mm diameter flush
pipe fittings and clamps, overflow arrangements with specials and 25mm
mosquito proof coupling of approved design, painting of fittings and
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.2 KSRB 11-2 : Providing and fixing white vitreous china clay, water pan 4,336.00
closet Orissa pattern of size 580 x 440mm with integral type footrests,
100mm S or P trap, 10 litre low level , P.V.C flushing cistern (all are
approved make) with fittings , C.I I M.S brackets, 32mm diameter flush
pipe fittings and clamps, overflow arrangements with special and 25mm
mosquito proof coupling of approved design, painting of fittings and
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.3 KSRB 11-3 : Providing and fixing white vitreous china clay, water pan 1,279.00
closet Indian type (Squatting pan) of size 580mm with footrests,
100mm S or P trap, (approved make) cutting and making good the
wall and floor wherever required, including cost of materials, labour
complete as per specifications.
12.4 KSRB 11-4 : Providing and fixing white vitreous china clay, water pan 2,161.00
closet Orissa pattern of size 580 x 440mm with integral type footrests ,
100mm S or P trap, (approved make ) cutting and making good the
wall and floor wherever required, including cost of materials, labour
complete as per specifications.
Specification No. KBS 11
12.5 KSRB 11-5 : Providing and fixing white vitreous china clay, water Each 5,130.00
closet European type ( Pedestal type, P-trap ) with black solid
plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level,
P.V.C flushing cistern (all are approved make ) with fittings, C. I I M.S
brackets, 40mm diameter flush bend with fittings and clamps, overflow
arrangements with special and 25mm mosquito proof coupling of
approved design, painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
Specification No. KBS 11
12.6 KSRB 11-6 : Providing and fixing white vitreous china clay, water Each 4,955.00
closet European type (Pedestal type, S-trap) with black solid plastic
seat and lid, C.P brass hinges, rubber buffers. 10 litre white glazed I
vitreous china clay low level, flushing cistern ( all are approved make )
with fittings, C.l I M.S brackets, 40mm diameter flush bend with fittings
77
Sl. No. Description Unit Rate
Rs. Ps.
12.12 KSRB 11-8.2 : Providing and fixing white vitreous china clay, wall Unit 3,925.00
corner type, lipped front urinal basin of size 340x41 Ox265mm in the
range of two with 7.51itre P.V.C automatic flushing cistern, C.I I M.S
brackets, standard flush pipe and C.P. brass spreaders with brass unions
and G.I. clamps painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
Specification No. KBS 11
12.13 KSRB 11-8.3 : Providing and fixing white vitreous china clay, wall Unit 4,718.00
corner type, lipped front urinal basin of size 340x41 Ox265mm in
the range of three with 7.5 litre P.V.C automatic flushing cistern,
C. I I M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.l. clamps painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications.
Specification No. KBS 11
12.14 KSRB 11-8.4 : Providing and fixing white vitreous china clay, wall Unit 5,575.00
corner type, lipped front urinal basin of size 340x41 Ox265mm in the
range of four with 10 litre P.V.C automatic flushing cistern, C.l I M.S
brackets, standard flush pipe and C.P. brass spreaders with brass unions
and G.l. clamps painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
Specification No. KBS 11
12.15 KSRB 11-9.1 : Providing and fixing white vitreous china clay, flat back Unit 4,995.00
or half stall urinal basin of size 580x380x350mm with 5 litres P.V.C
automatic flushing cistern, C. I I M.S brackets, standard flush pipe and
C.P. brass spreaders with brass unions and G. I. clamps C. I dtrap with
outlet grating and other couplings in C.P brass, painting of fittings and
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
12.16 KSRB 11-9.2 : Providing and fixing white vitreous china clay, flat Unit 8,315.00
back or half stall urinal basin of size 580x380x350mm in the range of
two with 7.5 litres P.V.C automatic flushing cistern, C.l I M.S brackets,
standard flush pipe and C.P. brass spreaders with brass unions and G. I.
clamps, C.l. trap with outlet grating and other couplings in C.P brass
painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.17 KSRB 11-9.3 : Providing and fixing white vitreous china clay, flat Unit 11,446.00
back or half stall urinal basin of size 580x380x350mm in the range of
three with 10 litres P.V.C automatic flushing cistern, C.l I M.S brackets,
standard flush pipe and C.P. brass spreaders with brass unions and G. I.
clamps, C.l. trap with outlet grating and other couplings in C.P brass
painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
79
51. No. Description Unit Rate
Rs. Ps.
12.18 KSRB 11-9.4 : Providing and fixing white vitreous china clay, flat Unit 14,514.00
back or half stall urinal basin of size 580x380x350mm in the range of
four with 10 litres P.V.C automatic flushing cistern, C.l I M.S brackets,
standard flush pipe and C.P. brass spreaders with brass unions and G.l.
clamps, C.l. trap with outlet grating and other couplings in C.P brass
painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.19 KSRB 11-10.1 : Providing and fixing white vitreous china clay, Unit 3,345.00
squatting plate with 5 litre P.V.C automatic flushing cistern including
brass coupling C. I I M.S brackets, G.l flush pipe of standard size and
C.P. brass spreaders painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
Specification No. KBS 11
12.20 KSRB 11 -10.2 : Providing and fixing white vitreous china clay, Unit 5,172.00
squatting plate in the range of two single squatting plate with 7.5
litre P.V.C automatic flushing cistern including brass coupling C.l I
M.S brackets, G.l flush pipe of standard size and C.P. brass spreaders
painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.21 KSRB 11-10.3 : Providing and fixing white vitreous china clay, Unit 6,810.00
squatting plate in the range of three single squatting plates with
10 litre P.V.C automatic flushing cistern including brass coupling C.l I
M.S brackets, G.l flush pipe of standard size and C.P. brass spreaders
painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.22 KSRB 11-10.4 : Providing and fixing white vitreous china clay, Unit 8,460.00
squatting plate in the range of four single squatting plates with
one number 15 litre P.V.C automatic flushing cistern including brass
coupling C. I I M.S brackets, G.l flush pipe of standard size and C.P.
brass spreaders painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
Specification No. KBS 11
12.23 KSRB 11-11.1 :Providing and fixing white vitreous china clay, flat Unit 3,886.00
back wash basin size 630x450mm with a pair of 15mm C.P brass
pillar taps with C.l I M.S brackets, 32 mm C.P. brass waste of standard
pattern, painting of fittings and brackets, cutting and making good the
wall and floor wherever required, including cost of materials, labour
complete as per specifications.
Specification No. KBS 11
80
Sl. No. Description Unit Rate
Rs. Ps.
12.24 KSRB 11-11 .2 : Providing and fixing white vitreous china clay, flat Unit 3,007.00
back wash basin size 630x450mm with a single 15mm C.P brass
pillar tap with C.I I M.S brackets, 32 mm C.P. brass waste of standard
pattern , painting of fittings and brackets, cutting and making good the
wall and floor wherever required, including cost of materials, labour
complete as per specifications.
Specification No. KBS 11
12.25 KSRB 11-11 .3 : Providing and fixing white vitreous china clay, flat back Unit 3,734.00
wash basin size 550x400mm with a pair of 15mm C. P brass pillar taps
with C. I I M.S brackets, 32 mm C.P. brass waste of standard pattern,
painting of fittings and brackets, cutting and making good the wall and ·
floor wherever required, including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.26 KSRB 11-11.4 : Providing and fixing white vitreous china clay, flat back Unit 2,856.00
wash basin size 550x400mm with a single 15mm C.P brass pillar tap
with C. I I M.S brackets, 32 mm C.P. brass waste of standard pattern,
painting of fittings and brackets, cutting and making good the wall and
floor wherever required , including cost of materials, labour complete as
per specifications.
Specification No. KBS 11
12.27 KSRB 11-11.5:- do- of size 450 x 300mm Unit 2,629.00
Specification No. KBS 11
12.28 KSRB 11-11.6 : Providing and fixing white vitreous china clay, angle Unit 3,133.00
back wash basin size 600x480mm with a single 15mm C.P brass
pillar tap with C. I I M.S brackets, 32 mm C.P. brass waste of standard
pattern , painting of fittings and brackets, cutting and making good the
wall and floor wherever required, including cost of materials, labour
complete as per specifications.
12.29 KSRB 11-11.7 : - do- of size 400 x 400 mm Unit 2,850.00
Specification No. KBS 11
12.30 KSRB 11-11.8: Providing and fixing white vitreous china clay, surgeon Unit 4,579.00
type wash basin size 660x460mm with a pair of 15mm C.P brass pillar
taps with pair of elbow operated levers, C. I I M.S brackets, 32 mm C.P.
brass waste of standard pattern, painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications.
KBS 11
12.31 KSRB 11-11 .9 : Providing and fixing white vitreous china clay, surgeon Unit 3,980.00
type wash basin size 660x460mm with single 15mm C.P brass pillar
tap with single elbow operated lever, C.l I M.S brackets, 32 mm C.P.
brass waste of standard pattern, painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications.
KBS 11
81
Sl. No. Description Unit Rate
Rs. Ps.
12.32 KSRB 11-12.1 : Providing and fixing kitchen sink of white glazed fire Unit 3,567.00
clay of size 600x450x250mm with M.S I C.l brackets, C.P brass chain
with rubber plug, 32 mm C.P. brass waste, tap with union, brass stop
cock complete, painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials,
labour complete as per specifications. KBS 11
12.33 KSRB 11-12.2 : - do- of size 750 x 450 x 250 mm Unit 4,044.00
KBS 11
12.34 KSRB 11-13.1 : Providing and fixing laboratory sink of white glazed Unit 3,395.00
fire clay of size 600x450x200mm with M.S I C. I brackets, C.P brass
chain with rubber plug, 32 mm C.P. brass waste, tap with union , brass
stop cock complete, painting of fittings and brackets, cutting and making
good the wall and floor wherever required , including cost of materials,
labour complete as per specifications. KBS 11
12.35 KSRB 11-13.2:- do- of size 450 x 300 x 150 mm Unit 3,087.00
KBS 11
12.36 KSRB 11-14.1 : Providing and fixing stainless steel kitchen sink of Unit 18,189.00
size 510x1040mm bowl depth 178mm, with drain board, M.S I C.l
brackets, stainless steel plug 40 mm, painting of fittings and brackets,
cutting and making good the wall and floor wherever required , including
cost of materials, labour complete as per specifications.
12.37 KSRB 11-14.2:- do- of size 500 x 1000 mm Unit 9,703.00
12.38 KSRB 11-14.3 : Providing and fixing stainless steel kitchen sink Unit 6,708.00
of size 400x915mm bowl depth 160mm, with drain board, M.S I C.l
brackets, stainless steel plug 40 mm, painting of fittings and brackets,
cutting and making good the wall and floor wherever required , including
cost of materials, labour complete as per specifications.
12.39 KSRB 11-15.1 : Providing and fixing 600x450mm bevellead edge Unit 1,251.00
mirror of superior glass with 6mm hard board backing and fixed to
wooden cleats with C.P screws, washers, including cost of materials,
labour complete as per specifications.
12.40 KSRB 11-15.2 : Providing and fixing 450mm dia circular shape mirror Unit 866.00
with plastic moulded frame of approved make and shade with 6mm thick
hard board backing including cost of materials, labour complete as per
specifications.
12.41 KSRB 11-15.3 : Providing and fixing 453x357mm dia rectangular Unit 1,180.00
shape mirror with plastic moulded frame of approved make and shade
with 6mm thick hard board backing including cost of materials, labour
complete as per specifications.
12.42 KSRB 11-15.4 : Providing and f ixing 450x350mm dia oval shape Unit 920.00
mirror with plastic moulded frame of approved make and shade with
6mm thick hard board backing including cost of materials, labour
complete as per specifications.
82
Sl. No. Description Unit Rate
Rs. Ps.
12.43 KSRB 11-15.5: Providing and fixing 1500x450mm dia rectangular Unit 1,698.00
shape mirror with plastic moulded frame of approved make and shade
with 6mm thick hard board backing including cost of materials, labour
complete as per specifications.
12.44 KSRB 11-16 : Providing and fixing 600x120mm glass shelf supported Unit 1,220.00
on alluminium angle frame with C.P brass brackets, guard rail fixed to
wooden cleats with C.P. brass screws and washers including cost of
materials, labour complete as per specifications.
12.45 KSRB 11-17-1 : Providing and fixing C.P. brass towel rail 740mm Unit 783.00
length, 20mm dia with C.P brackets, fixed to wooden cleats with
C.P. brass screws including cost of materials, labour complete as per
specifications.
12.46 KSRB 11-17.2: Providing and fixing C.P. brass towel rail 600 mm Unit 710.00
length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass
screws including cost of materials, labour complete as per specifications.
12.47 KSRB 11-18-1.1 :Providing and fixing sand cast iron soil waste and m 704.00
vent pipes 1OOmm dia with spun yarn soaked in cement slurry and
cement mortar 1:2 including cost of materials, labour, testing complete
as per specifications. KBS 11-1 .10
12.48 KSRB 11-18-1 .2 : - do - with 75mm dia pipe m 679.00
KBS 11-1.10
12.59 KSRB 11-18-5.1 : Providing and fixing sand cast iron soil waste single Each 1,010.00
equal junction of required degree with access door 100x1 00x1 OOmm,
insertion of rubber washers 3mm thick bolts and nuts, including cost
of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.60 KSRB 11-18-5.2:- do- with access door 75 x 75 x 75 mm Each 752.00
KBS 11-1.10
12.68 KSRB 11-18-8.1 : Providing and fixing sand cast iron soil waste double Each 933.00
equal junction of required degree 100x100x100x100mm, including
cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.1 0
84
Sl. No. Description Unit Rate
Rs. Ps.
12.71 KSRB 11-18-9.1 :Providing and fixing sand cast iron soil waste single Each 1,010.00
equal junction of required degree with access door 100x1 00x1 OOmm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11 .1.10
12.72 KSRB 11-18-10.1 : Providing and fixing sand cast iron soil waste Each 1,179.00
double unequal junction of required degree100x100x75x75mm,
including cost of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.73 KSRB 11-18-11.1 : Providing and fixing sand cast iron soil waste single Each 534.00
unequal junction of required degree 100x100x75mm, including cost
of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.74 KSRB 11-18-11.2 : - do- with 100 x 100 x 50 mm Each 541 .00
KBS 11-1.10
12.76 KSRB 11-18-12.1 : Providing and fixing sand cast iron soil waste double Each 1,074.00
equal invert plain branches of required degree 100x100x100x100mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11 .1.10
12.79 KSRB 11-18-13.1 : Providing and fixing sand cast iron soil waste single Each 1,032.00
equal invert plain branches of required degree 100x100x100x100mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.10
12.82 KSRB 11-18-14.1 : Providing and fixing sand cast iron soil waste double Each 1,143.00
unequal invert plain branches of required degree 100x1 00x75x75mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11 .1.10
12.83 KSRB 11-18-14.3 : Providing and fixing sand cast iron soil waste double Each 611 .00
equal invert plain branches of requ ired degree 75x75x50x50mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.10
85
51. No. Description Unit Rate
Rs. Ps.
12.84 KSRB 11-18-15.1 : Providing and fixing sand cast iron soil waste single Each 534.00
unequal invert plain branches of required degree 100x100x75mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.1 0
12.85 KSRB 11-18-15.2 : Providing and fixing sand cast iron soil waste Each 457.00
single unequal invert plain branches of required degree 75x75x50mm
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11 .1.1 0
12.86 KSRB 11-18-16.1 : Providing and fixing sand cast iron soil waste Each 723.00
152mm offsets for 1OOmm pipes, including cost of materials, labour,
testing complete as per specifications.
Specification No. KBS 11.1.1 0
12.87 KSRB 11-18-16.2 : Providing and fixing sand cast iron soil waste Each 443.00
114mm offsets for 75mm pipes, including cost of materials, labour,
testing complete as per specifications.
Specification No. KBS 11 .1. 10
12.88 KSRB 11-18-16.3: Providing and fixing sand cast iron soil waste 230 Each 778.00
mm offsets for 75mm pipes, including cost of materials, labour, testing
complete as per specifications.
Specification No. KBS 11.1.1 0
12.89 KSRB 11-18-17.1 : Providing and fixing sand cast iron trap of 1OOmm Each 834.00
dia, of self cleaning design with screwed down or hinged grating with
or without vent arm including cutting and making good the walls and
floors, cost of materials, labour, testing, complete as per specifications
Specification No. KBS 11.1.1 0
12.92 KSRB 11-18-18.1 : Providing lead caulked joints to sand cast iron Joint 105.00
I cast iron ( spun ) pipes and fittings of 1OOmm dia, including cost of
materials, labour, testing, complete as per specifications.
Specification No. KBS 13.2.7
12.95 KSRB 11-18-9.2 : Providing and fixing sand cast iron soil waste single Each 752.00
equal junction of required degree with access door 75x75x75mm,
including cost of materials, labour, testing complete as per specifications
Specification No. KBS 11.1 .10
86
Sl. No. Description Unit Rate
Rs. Ps.
12.97 KSRB 11-18-10.2 : Providing and fixing sand cast iron soil waste Each 1,172.00
double unequal junction of required degree 100x1 00x50x50mm,
including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1 .10
12.99 KSRB 11-18-19.1 : Providing and fixing M.S stays and clamps for No 229.00
sand cast iron pipes of 1OOmm dia including cost of materials, labour,
complete as per specifications.
12.103 Providing (China Clay) glazed foot rests of approved 1st quality and Pair 180.00
make conforming to lSI specifications and fixing in CM (1 :3) as directed
(Rate includes cost of materials and conveyance to work spot).
12.104 Providing plastic seat with approved 1st quality and make conforming
to lSI specifications double flapped and fixing to English water closet
with all fittings (Rate includes cost of materials, fixtures and conveyance
to work spot).
12.105 Providing 3 ems dia Gl telescopic flush tank lever of approved 1st Each 225.00
quality and make conforming to lSI specifications and fixing in position
as directed by the Engineer. Rate includes cost of materials and
conveyance to work spot.
12.106 Providing vulcanizing or rubber float of approved 1st quality and make Each 180.00
conforming to lSI Specifications and fixing for low down cistern as directed
.Rate includes cost of materials and conveyance to work spot.
12.107 Providing wash basin brackets of approved 1st quality and make Pair 228.00
conforming to lSI Specifications and fixing for low down cistern as
directed .Rate includes cost of materials and conveyance to work spot.
12.108 Providing pedestal for wash basin of approved 1st quality and make Each 875.00
conforming to lSI Specifications and fixing for low down cistern as
directed .Rate includes cost of materials and conveyance to work spot.
87
St. No. Description Unit Rate
Rs. Ps.
12.109 Providing and fixing white vitreous china clay urinals with flat back Each 860.00
of approved make fixed to wooden plugs including bends, painting white
to exposed pipes etc., complete as per directions.(rate includes cost of
all materials and lead).A grade.
12.110 Providing white vitreous china clay Indian pattern squatting urinals Each 970.00
with white glazed foot rests of approved quality and make conforming
to lSI specifications and fixing in Position with M-15 as directed of size
50.8 ems X 38 ems X 10.16 ems -A Grade (Rate includes cost of all
materials and conveyance to work spot).
12.111 Providing and fixing 7.5 ems to 15.00 ems dia NP grating 100 mm dia. Each 160.00
12.112 Providing stoneware gully trap of approved quality and make fixing in
M-15 and plastering with CM 1:3 wherever necessary.( Rate includes
cost of all materials, fixtures and lead).
12.112.1 -do- 1Ocms x 1Ocms Each 185.00
12.112.2 -do- 15cms x 1Ocms Each 270.00
12.113 Providing and fixing Cl Nahani trap of approved make conforming to
lSI specifications and construction of Cistern in M-15 as per directions
(Rate is inclusive of cost of materials and fixtures and conveyance of
materials to work spot).
12.113.1 -do-10cms x 7.5cms Each 250.00
12.113.2 -do-12.5cms x 7.5cms Each 285.00
12.114 Cleaning the blockages of closets and soil pipes into working order
12.114.1 -Do- with scaffolding m 60.00
12.114.2 -Do- without scaffolding m 50.00
12.114.3 -do- underground stone ware pipes m 20.00
12.115 Providing and fixing white viterous china clay, wall corner type, lipped Unit 31,083.00
front waterless urinal basin of size 328x319x598mm C.l. I M.S. brackets,
standard flush pipe complete painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications.
12.116 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00
kgs/sqcm working pressure with pipe fittings, wall clips etc., and making
good the wall, ceiling and floor for sanitary pipelines including cost of all
materials, labour charges, HOM of acquirements and testing complete
as per specifications.
12.116.1 -do-110mmdia m 412.00
12.116.2- do - 140 mm dia m 666.00
12.116.3- do - 160 mm dia m 830.00
12.116.4 - do- 200 mm dia m 1,332.00
12.1 16.5 - do- 250 mm dia m 2,052.00
88
WATER SUPPLY WORK
89
Sl. No. Description Unit Rate
Rs. Ps.
13.1 KSRB 13-1 .1 : Providing and fixing to wall, ceiling and floor galvanised m 185.00
I mild steel tube 15mm dia nominal bore with fittings (medium
grade weight 1.27 kglmtr) 8 class including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 I 13.8
13.7 KSRB13-2.1 : Extra for concealed pipe including painting with m 111.00
anticorrosive bitumastic paint cutting chases, making good the
concrete surface, and plaster for 15mm dia nominal bore including
cost of all materials, labour charges, HOM equipment complete as per
specifications.
Specification No.KBS
13.10 KSRB13-3.1: Providing and fixing in trenches galvanised I mild steel m 149.00
tubes (medium grade) 15mm dia nominal bore with all fittings (earth
work in trenches to be measured and paid for separately) including
cost of all materials, labour charges, HOM of equipments and testing
complete as per specifications.
Specification No.KBS 13.2.14 I 13.6
90
51. No. Description Unit Rate
Rs. Ps.
13.20 KSRB 13-4.1 : Making connection of G.l distribution branch with G.l Nos 361.00
main of 25 to 40mm. nominal bore, including cutting and threading the
pipes, providing and fixing Tee, nuts, labour for all item of works, testing
and HOM of equipments complete as per specifications.
Specification No.KBS 13.10
13.21 KSRB 13-4.2 : Making connection of G.l distribution branch with G.l Nos 746.00
main of 50 to 85mm. and 100 to 150 nominal bore, including cutting and
threading the pipes, providing and fixing Tee, nuts, labour for all item of
works, testing and HOM of equipments complete as per specifications.
Specification No.KBS 13.10
13.22 KSRB 13-5 : Providing and fixing water meter with stop cock, jam Set 1,318.00
nut, socket in G.l pipe line including cutting and threading the pipe
and making long screws including cost of all materials, labour, HOM of
equipments and testing complete as per specifications.
Specification No.KBS 13.2.19 I 13.16
13.23 KSRB13-6.1-1 :Providing and fixing in position brass bib cock of Each 231.00
approved quality 15mm nominal bore including cost of all materials,
labour and HOM of equipments with all leads comp lete as per
specifications.
Specification No.KBS 13.2.2 I 13.3
91
Sl. No. Description Unit Rate
Rs. Ps.
13.66 KSRB 13-8.1 : Providing and fixing to wall, ceiling and floor, medium m 92.00
density polyethylene pipes 6.00 kgs/sq.cm working pressure 20mm
outside diameter with special flange, compression type fittings, wall clips,
making good the wall, ceiling and floor including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.15.1 I 13.9 for internal water supply connection
93
51. No. Description Unit Rate
Rs. Ps.
13.71 KSRB 13-9.1 : Providing and fixing to wall, ceiling and floor high density m 238.00
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside
diameter raising mains & exposed distribution pipes with special flange,
compression type fittings, wall clips, making good the wall, ceiling and
floor, including cost of all materials, labour charges, HOM of equipments
and testing complete as per specifications.
Specification No. KBS 13.2.15.2 I 13.9
13.72 KSRB13-9.2- do- 40 mm dia m 263.00
13.73.1 KSRB13-9.3- do- 50 mm dia m 346.00
13.74 KSRB13-1 0.1 : Providing and fixing to wall , ceiling and floor m 94.00
unplasticised PVC pipes 10.00 kgs/sq.cm working pressure 16mm
outside diameter chemp plast I Wavin or equivalent make with pipe
fittings, wall clips, making good the wall , ceiling and floor, including
cost of all materials, labour charges, HOM of equipment and testing
complete as per specifications.
Specification No.KBS 13.2.15.4 I 13.9
94
Sl. No. Description Unit Rate
Rs. Ps.
13.80 Providing gun metal pillar cocks 15mm dia of I class conforming to Each 250.00
lSI specifications and fixing them in position as per directions including
of cost of materials and fixtures and conveyance to spot.
96
51. No. Description Unit Rate
Rs. Ps.
13.87 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes
conforming to IS 15778 having thermal stability for hot and cold water
supply including all CPVC plain and brass threaded fittings, this includes
jointing of pipes and fittings with one step solvent cement, trenching,
refilling & testing of joints complete. (external work).
13.87.1 15mm nominal OD pipes m 110.00
13.87.2 20mm nominal OD pipes m 125.00
13.87.3 25mm nominal OD pipes m 165.00
13.87.4 32mm nominal OD pipes m 215.00
13.87.5 40mm nominal OD pipes m 300.00
13.87.6 50mm nominal OD pipes m 450.00
13.87.7 62.50mm nominal OD pipes m 1,390.00
13.87.8 75mm nominal OD pipes m 1,715.00
13.87.9 1OOmm nominal OD pipes m 2,380.00
13.87.10 150mm nominal OD pipes m 4,140.00
13.88 Providing and fixing polished granite sink of size 60cms x 90cms Each 7,070.00
of 23cm thick, the sink portion shall be 15cm in depth of shapes oval/
round I square over brick masonry in cement mortar 1:6 including cost
and conveyance of all materials, labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation
charges and all other incidental charges etc ., complete as per
specification and directions of the Engineer-in-charge of the work.
13.89 Providing and fixing polished granite sink of size 60cms x 75cms Each 5,957.00
of 23cm thick, the sink portion shall be 15cm in depth of shapes oval/
round I square over brick masonry in cement mortar 1:6 including cost
and conveyance of all materials, labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation
charges and all other incidental charges etc., complete as per
specification and directions of the Engineer-in-charge of the work.
13.90 Providing and fixing polished granite sink of size 60cms x 60cms Each 4,844.00
of 23cm thick, the sink portion shall be 15cm in depth of shapes oval/
round I square over brick masonry in cement mortar 1:6 including cost
and conveyance of all materials, labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation
charges and all other incidental charges etc., complete as per
specification and directions of the Engineer-in-charge of the work.
13.91 Providing and Fixing Stainless Steel sink of sizes upto 40cms x Each 5,793.00
47cms in 20mm thick granite slab of by cutting required thickness
and width of grooves and fixing using adhesives etc., complete
including cost and conveyance of all materials, labour for all items of
work, HOM of equipment with all lead and lift, loading and unloading,
transportation charges and all other incidental charges etc., complete as
per specification and directions of the Engineer-in-charge of the work.
97
51. No. Description Unit Rate
Rs. Ps.
13.92 Cutting granite slab upto 40mm thick and required width of grooves
for fixing Stainless Steel sink and fixing using adhesives.
13.92.1 _do_ for fixing Stainless steel sink upto 60cm x 45 ems No 636.00
13.92.2 _do_ for fixing Stainless steel sink above 60cm x 45 ems No 956.00
13.93 Providing and fixing concealed UVstabilised and antimicrobial fusion
3 layer PP-R pipes confirming to DIN 8077 complete with PP-R plain
fittings incluiding brass threaded polypropelene random fittings including
chasing the walls.
Internal Plumbing -for concealed fitting
13.93.1 20mm pipe outer dia (3 layer) m 200.00
13.93.2 25mm pipe outer dia (3 layer) m 265.00
13.93.3 32mm pipe outer dia (3 layer) m 320.00
13.94 Providing and fixing concealed UV stabilised and antimicrobial fusion
3 layer PP-R pipes confirming to DIN 8077 compete with PP-R plain
fittings including brass threaded polypropelene random fittings including
chasing the walls.
Internal Plumbing -for exposed on wall
13.94.1 20mm pipe outer dia (3 layer) m 135.00
13.94.2 25mm pipe outer dia (3 layer) m 175.00
13.94.3 32mm pipe outer dia (3 layer) m 230.00
13.94.4 40mm pipe outer dia (3 layer) m 330.00
13.94.5 50mm pipe outer dia (3 layer) m 490.00
13.95 Providing and fixing concealed UV stabilised and antimicrobial
fusion 3 layer PP-R pipes confirming to DIN 8077 complete with PP-R
plain fittings including brass threaded polypropelene random fittings
including chasing the walls.
External plumbing
13.95.1 20mm pipe outer dia (3 layer) m 125.00
13.95.2 25mm pipe outer dia (3 layer) m 175.00
13.95.3 32mm pipe outer dia (3 layer) m 215.00
13.95.4 40mm pipe outer dia (3 layer) m 300.00
13.95.5 50mm pipe outer dia (3 layer) m 530.00
13.95.6 63mm pipe outer dia (3 layer) m 665.00
13.95.7 75mm pipe outer dia (3 layer) m 835.00
13.95.8 90mm pipe outer dia (3 layer) m 1,270.00
13.95.9 110mm pipe outer dia (3 layer) m 1,340.00
13.95.10 160mm pipe outer dia (3 1ayer) m 2,470.00
98
Sl. No. Description Unit Rate
Rs. Ps.
99
FLOORING
100
Sl. No. Description Unit Rate
Rs. Ps.
14.0 FLOORING
14.1 KSRB 14.1 : Providing and laying flooring with burnt stone slabs 10 ems Sqm 1,040.00
thick, rough chistle dressed on sand bed of 7.5 ems to 8 ems thick
and pointed with cement mortar 1:3, including cost of materials, sand,
labour, curing complete as per specifications.
Specification No. KBS 14.26
14.2 KSRB 14.2 : Providing and laying flooring with burnt stone slabs Sqm 1,013.00
10 ems thick rough chistle dressed on cement mortar bed 1:6, 25 mm
thick, and pointed with cement mortar 1:3, including cost of materials,
mortar, labour, curing complete as per specifications.
Specification No. KBS 14.26
14.3 KSRB 14.3 : Providing and laying flooring and steps machine cut granite Sqm 2,665.00
slabs 40mm thick on cement mortar bed 1 :6, 25 mm thick, and pointed
with cement mortar 1:3 over existing cement concrete bed, including
cost of materials, mortar, labour, curing complete as per specifications.
Specification No. KBS 14.26
14.4 KSRB 14.4 : Providing and laying flooring and steps fine dressed granite Sqm 3,161.00
stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick,
and pointed with cement mortar 1:3 over existing cement concrete
bed, including cost of materials, mortar, labour, curing complete as per
specifications. Specification No. KBS 14.26
14.5 KSRB 14.5 : Providing and laying flooring and steps fine machine Sqm 1,159.00
polished granite stone slabs 20 mm thick on cement mortar bed 1:6,
20 mm thick, and joints finished with cement mortar 1:3 over existing
cement concrete bed , including cost of materials, mortar, labour, curing
complete as per specifications.
Specification No. KBS 14.26
14.6 KSRB 14.6-1: Providing and laying heavy duty cobble stones 60mm Sqm 912.00
thick interlock pavers, using cement and course sand for manufacture of
blocks of approved size, shape and colour with a minimum compressive
strength of 281 kg per sqm over 50mm thick sand bed (average
thickness ) and compacting with plate vibrator having 3 tons compaction
force thereby forcing part of sand underneath to come up in between
joints, final compaction of paver surface joints into its final level, including
cost of materials, labour and HOM of machineries complete as per
specifications.
Specification No. KBS
14.7 KSRB 14.6-2 : -do- heavy duty cobble stones 75mm thick Sqm 970.00
14.8 KSRB 14.7-1: Providing and laying flooring with M15 cement concrete Sqm 323.00
40 mm thick using broken granite 20mm and down size laid to line and
level in one layer and finish with a floating coat of neat cement , including
cost of materials, labour, curing, complete as per specifications.
Specification No. KBS 14.3
101
51. No. Description Unit Rate
Rs. Ps.
14.9 KSRB 14.7-2: Providing and laying red oxide flooring 40 mm thick, Sqm 578.00
with an under layer of 30mm thick M-15 cement concrete, using broken
granite metal of 12.5mm nominal size and top layer of 1Omm thick plaster
with 1:3 cement mortar mixed with red oxide (using 3.5 kg of red oxide
per 50 kg of cement ) finished with floating coat of neat cement mixed
with red oxide (mix of same proportion), including cost of materials,
labour, curing, complete as per specifications.
Specification No. KBS 14.3
14.10 KSRB 14.7-3 : Providing and laying flooring 40 mm thick, with an Sqm 517.00
under layer of 30mm thick M-15 cement concrete, using broken granite
metal of 12.5mm nominal size and top layer of 1Omm thick plaster with
cement mortar 1:3, finished with floating coat of neat cement , including
cost of materials, labour, curing, complete as per specifications.
Specification No. KBS 14.3
14.11 KSRB 14.7-4 : Extra for making chequers of approved pattern on cement Sqm 22.00
concrete floor, steps, landings, pavements, including cost of labour
complete as per specifications.
Specification No. KBS
14.12 KSRB 14.8-1: Providing and laying linolium covering to floors plain Sqm 413.00
or coloured 3.2mm thick sheet I tiles laid with an approved adhesive
on sub floor stretching, cutting and fixing complete, including cost of
materials, labour, complete as per specifications.
Specification No. KBS 14.37.7
14.13 KSRB 14.9-1: Providing and laying M-15 cement concrete flooring, Sqm 591 .00
50 mm thick with metallic concrete hardner topping, under layer of
35mm thick m-15 cement concrete using broken granite metal of 20mm
and down size, and top layer 50mm thick of metallic cement hardner
consisting of mix 1:2 (1 cement hardner mix : 2 granite metal 1Omm
nominal size) by volume, with which metallic hardening compound of
approved quality mix in the ratio of 4:1 ( 4 part of cement and 1 part of
metallic floor hardening compound of approved quality by wt), including
finishing cost of materials, labour, curing, complete as per specifications
Specification No. KBS 14.4
14.14 KSRB 14.9-2 : Providing and laying M-15 cement concrete flooring Sqm 673.00
60 mm thick with metallic concrete hardner topping, under layer of
45mm thick M-15 cement concrete using broken granite metal of 20mm
and down size and top layer of 15mm thick metallic cement hardner
consisting of mix 1:2 (1 cement hardner mix : 2 granite metal 10mm
nominal size) by volume, with metalic hardening compound of approved
quality mix in the ratio of 4:1 (4 part of cement= 1 part of metallic floor
hardening compound of approved quality by wt), including finishing ,
cost of materials, labour, curing, complete as per specifications.
Specification No. KBS 14.4
102
Sl. No. Description Unit Rate
Rs. Ps.
14.15 KSRB 14.10-1: Flooring with 25mm thick polished tandur blue stone Sqm 1,121 .00
slabs using cement mortar 1:6, 25mm thick over existing cement
concrete bed or top of roof laid to line and level and jointed with cement
slurry mixed with pigment to match the shade of the slab, including cost
of materials, labour, curing, polishing complete as per specifications.
Specification No. KBS
14.16 KSRB 14.10-2: Flooring with 20 mm thick polished shahabad slabs Sqm 1,199.00
using cement mortar 1:6, 25mm thick over existing cement concrete
bed or top of roof laid to line and level and jointed with cement slurry
mixed with pigment to match the shade of the slab, including cost of
materials, labour, curing, polishing complete as per specifications.
Specification No. KBS
14.17 KSRB 14.10-3: Providing flooring with 20 mm thick polished Cadapa Sqm 1,106.00
slabs using cement mortar 1:6, 25 mm thick over existing cement
concrete bed or top of roof laid to line and level and jointed with cement
slurry mixed with pigment to match the shade of the slab, including cost
of materials, labour, curing, polishing complete as per specifications.
Specification No. KBS
14.18 KSRB 14.11-1 : Providing mosaic flooring with cast-in-situ 40mm Sqm 1,220.00
thick using marble chips flooring rubbed and polished to granolithic
finish with under layer of 28mm thick cement concrete M-15 with stone
aggregate 12mm and down size, and top layer 12mm thick with dark
shade pigment with ordinary cement in top layer only using white,
black, chacolate, yellow or baroda green marble chips of size from
7 to 10 nominal size laid in cement marble powder mix 3:1 ( 3 cement:
1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble
powder mix : 7 marble chips by volume ) curing polishing oxalic acid
wash, wax polish , including cost of materials, labour, complete as per
specifications.
Specification No. KBS 14.8
14.19 KSRB 14.11 -2 : Providing mosaic flooring with cast-in-situ 40mm Sqm 1,338.00
thick using marble chips flooring, rubbed and polished to granolithic
finish with under layer of 28mm thick cement cocrete M-15 with stone
aggregate 12mm and down size , and top layer 12mm thick with light
shade pigment with white cement in top layer only using white, black,
chacolate, yellow or baroda green marble chips of size from 7 to 10
nominal size laid in cement marble stone mixed 3:1 ( 3 cement : 1 marble
powder by weight) in proportion of 4:7 ( 4 cement marble powder mix:
7 marble chips by volume ) curing polishing oxalic acid wash, wax polish
, including cost of materials, labour, complete as per specifications.
Specification No. KBS 14.8
14.20 KSRB 14.11-3 : Providing mosaic flooring with cast-in-situ 40mm thick Sqm 1,247.00
using marble chips flooring rubbed and polished to granolithic finish with
under layer of 28mm thick cement cocrete M-15 with stone aggregate
12mm and down size, and top layer 12mm thick with medium shade
pigment with approximately 50% white cement and 50% ordinary
103
Sl. No. Description Unit Rate
Rs. Ps.
cement in top layer only using white, black, chacolate, yellow or baroda
green marble chips of size from 7 to 10 nominal size laid in cement
marble stone mixed 3:1 (3 cement : 1 marble powder by weight) in
proportion of 4:7 (4 cement marble powder mix : 7 marble chips by
volume) curing polishing oxalic acid wash, wax polishing, including cost
of materials, labour, complete as per specifications.
Specification No. KBS 14.8
14.21 KSRB 14.11-4 : Providing mosaic flooring with cast-in-situ 40mm Sqm 1,256.00
thick using marble chips and polished to granolithic finish with under
layer of 28mm thick cement concrete M-15 with stone aggregate 12mm
and down size, and top layer 12mm thick with white cement without
any pigment in top layer only using white, black, chacolate, yellow or
baroda green marble chips of size from 7 to 10 nominal size laid in
cement marble powder mix 3:1 ( 3 cement: 1 marble powder by weight)
in proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by
volume ) curing, polishing oxalic acid wash, wax polish, including cost
of materials, labour, complete as per specifications.
Specification No. KBS 14.8
14.22 KSRB 14.11-5 :Extra for providing and fixing aluminium strips 40 mm m 33.00
wide and 1.5mm thick painted with a protective coat of bitumen for joints
of mosaic floors, including cost of materials, labour, curing, complete
as per specifications.
Specification No. KBS
14.23 KSRB 14.11-6 :Extra for providing and fixing glass strips 40 mm wide m 43.00
and 4mm thick for joints of mosaic floors , including cost of materials,
labour, curing, complete as per specifications.
Specification No. KBS
14.24 KSRB 14.12-1 : Providing mosaic tiles flooring with precast grey colour Sqm 732.00
mosaic tiles 20mm thick using marble chips of approved colour 7 to 10
nominal size laid in floors and landings on a bed of 25mm thick cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to
match the shade of tiles curing, rubbing, polishing, oxalic acid wash, wax
polish , including cost of materials, labour, HOM of machinary complete
as per specifications.
Specification No. KBS 14.11
14.25 KSRB 14.12-2: Providing mosaic tiles flooring with precast light Sqm 818.00
shade pigment with white cement mosaic tiles 20mm thick using
marble chips of approved colour 7 to 10 nominal size laid in floors
and landings on a bed of 25mm thick cement mortar 1:6, mix, jointed
with neat cement slurry mix with pigment to match the shade of tiles,
curing. rubbing , polishing, oxalic acid wash, wax polish, including cost
of materials, labour, HOM of machinary complete as per specifications.
Specification No. KBS 14.11
14.26 KSRB 14.12-3 : Providing mosaic tiles flooring with precast medium Sqm 646.00
shade pigment using 50% white cement and 50% ordinary cement
104
51. No. Description Unit Rate
Rs. Ps.
14.27 KSRB 14.12-4 : Providing mosaic tiles flooring with white precast Sqm 774.00
cement mosaic tiles 20mm thick using marble chips of 7 to 10 nominal
size laid in floors and landings on a bed of 25mm thick average thickness
of cement mortar 1:6, mix, jointed with neat cement slurry mix with
pigment to match the shade of tiles, curing, rubbing, polishing, oxalic
acid wash, wax polish , including cost of materials, labour, HOM of
machinary complete as per specifications.
14.28 KSRB 14.13-1: Providing precast chequered mosaic tiles dark shade Sqm 972.00
using ordinary grey cement for steps and flooring, with precast
20mm thick, using marble chips of 7 to 10 nominal size laid in floors,
steps and landings on a bed of 12mm thick cement mortar 1:3 mix, and
jointed with neat cement slurry mixed with pigment to match the shade
of tiles, curing, rubbing, polishing, oxalic acid wash, wax polish,including
cost of materials, labour, complete as per specifications.
14.29 KSRB 14.13-2: Providing precast chequered mosaic tiles light shade Sqm 1,080.00
using white cement for steps and flooring, 20mm thick, using marble
chips of 7 to 10 nominal size laid in floors, steps and landings on a bed
of 12mm thick cement mortar 1:3 mix, and jointed with neat cement
slurry mixed with pigment to match the shade of tiles curing, rubbing ,
polishing, oxalic acid wash, wax polish , including cost of materials,
labour, complete as per specifications.
Specification No. KBS 14.13, 14.14
14.30 KSRB 14.13-3: Providing precast chequered mosaic tiles medium Sqm 1,039.00
shade pigment using 50% white cement and 50% ordinary cement
for steps and flooring 20mm thick using marble chips of 7 to 10 nominal
size laid on a bed of 12mm thick cement mortar 1 :3 mix, and jointed
with neat cement slurry mixed with pigment to match the shade of tiles
curing, rubbing, polishing, oxalic acid wash, wax polish , including cost
of materials, labour, complete as per specifications.
Specification No. KBS 14.13, 14.14
14.31 KSRB 14.13-4: Providing precast chequered mosaic tiles white Sqm 1,138.00
colour for steps and flooring, 20mm thick, using marble chips of 7
to 10 nominal size laid on a bed of 12mm thick cement mortar 1:3 mix,
and jointed with neat cement slurry mixed with pigment to match the
shade oftiles rubbing, polishing, oxalic acid wash, wax polish, including
cost of materials, labour, curing, complete as per specifications.
Specification No. KBS 14.13, 14.14
14.36.1 _do_ for Ceramic Tiles of size 15x15cms 6mm thick Sqm 925.00
14.36.2 do for Ceramic Tiles of size 30x30cms 6mm thick Sqm 1,176.00
14.36.3 _do for Ceramic Tiles 400 x 400mm on a bed of 20mm thick Sqm 1,178.00
14.36.4 _do_ for Ceramic Tiles 30cm x 60cm 6mm thick, on a bed of 20mm Sqm 1,178.00
thick
14.37 KSRB 14.15-1: Providing marble slab flooring 20mm thick with edges Sqm 3,111.00
of slab machine cut, for flooring, treads of steps and landings laid on
a bed of 25mm thick cement mortar 1:6, mix, to line and level, jointed
with cement slurry curing, rubbing, polishing complete finishling with
flush pointing using white cement, including cost of materials, HOM of
machineries, labour, curing, complete as per specifications.
14.38 KSRB 14-16.1 : Providing skirting upto 30 ems. height with cement Sqm 271.00
mortar 1:3 finished with a floating coat of neat cement including rounding
off junctions floor, overall15 mm thick including cost of materials, labour,
complete as per specifications.
Specification No.KBS 14.5
14.39 KSRB 14-16.2 : Providing red oxide skirting upto 30 ems. height Sqm 295.00
with cement mortar 1:3 including rounding off junctions with floor,
finished overall15 mm thick, top portion 5mm thick mixed with red oxide
and a floating coat of neat cement using 3.5kg of red oxide of iron per
50 kg of cement including cost of materials, labour, complete as per
specifications.
Specification No.KBS 14.5
14.40 KSRB 14-17.1 :Providing skirting, dadoing, rises of steps with white Sqm 951.00
glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed
with white cement slurry over existing rough plaster surface using glazed
tiles of approved make and size including cost of materials, labour,
complete as per specifications.
Specification No.KBS 14.16,14.17
14.41 KSRB 14-17.2 : Providing skirting, dadoing, rises of steps with colour
glazed tiles on 1Omm thick cement plaster 1:3 and jointed with white
cement slurry over existing rough plaster surface using glazed tiles of
approved make and size including cost of materials, labour, complete
as per specifications.
Specification No.KBS 14.16,14.17
14.41 .1 Colour glazed tiles 15x15 ems 6mm thick Sqm 1,072.00
14.41.2 Colour glazed tiles 30x60 ems 6mm thick with border of size 30 x 10 Sqm 1,484.00
ems
14.41.3 Colour glazed tiles 30x45 ems 6mm thick with border of size 30 x 10 Sqm 1,119.00
ems.
106
Sl. No. Description Unit Rate
Rs. Ps.
14.42 KSRB 14-18.1 : Providing skirting, dadoing, rises of steps using Sqm 3,269.00
marble slabs with machine cut edges upto 25mm thick and not
exceeding 30 ems. height on 10 mm. thick cement mortar 1 :3 and
jointed with white cement slurry over existing rough plaster surface
including cost of materials, mortar, labour complete as per specifications.
Specification No.KBS 14.19
14.43 Providing and fixing Special make glazed Vitrified tiles (Granomite Sqm 1,190.00
finish) of approved make, quality and colour of size 600x600x1 Omm
thick fixed on existing flooring with a special adhesive for flooring, skirting
and jointed with neat cement slurry mixed with pigment to match shade of
tiles, including providing spacers at required interval and removing stains
etc., cost of materials, mortar, labour etc., complete as per specification.
14.44 Providing and fixing Vitrified glazed tiles of approved make, quality Sqm 1,069.00
& colour of size 600 x 600 x 1Omm thick fixed on existing flooring with
special adhesive for flooring, skirting and jointed with neat cement slurry
mixed with pigment to mach shade of tiles, including providing spacers
at required interval and removing stains, cost of materials, mortar, labour
etc., complete as per specification.
14.45 Providing and fixing Vitrified glazed tiles of approved make, quality Sqm 1,112.01)
& colour of size 600 x 600 x 1Omm thick fixed on bed of 12mm thick
cement mortar for flooring, skirting and jointed with neat cement slurry
mixed with pigment to mach shade of tiles, including providing spacers
at required interval and removing stains, including cost of all mateirals,
mortar, labour, etc. , Complete as per specification.
14.46 Providing and laying pattern flooring for staircase treads and risers Sqm 5,724.00
using the combination of 20mm thick ruby red granite @ 66%,20 mm
thick grey granite@ 20%, 20mm thick, 20mm thick black granite 14%.
The granite materials are laid with a bed of CM 1 :3, 20mm thick pointed
with colour pigment, including full rounding for nosing, flaming the ruby
red granite for 50 mm wide including cost of all materials, mortar, labour,
curing etc., complete as per specification.
14.47 Providing and laying flooring using prepolished, water cut/gang saw
19mm thick granite laid with a bed of 20mm thick 1:4 em & jointed
with neat cement slurry mixed with pigment to mach shade of granite
slabs including laying POP on finished surface and cleaning the surface,
including the cost of all materials, mortar and labours etc., complete as
per specifications.
14.47.1 -do- using silver grey granite I Multy Red I Ruby Red I Black I Hassan Sqm 2,619.00
Green Granite of width not less than 1200mm
14.47.2 -do- using black granite/ Multy Red I Ruby Red I Black I Hassan Sqm 2,301.00
Green Granite of width not less than 900mm
14.47.3 -do- using 10mm thick silver grey granite I Multy Red I Ruby Red Sqm 1,276.00
I Black I Hassan Green Granite tiles
14.47.4 -do- using 19mm thick Raw Silk I Black Pearl granite of width not less Sqm 2,619.00
than 1200 mm
14.47.5 -do- using 19mm thick Raw Silk I Black Pearl granite of width not less Sqm 2,396.00
than900 mm
107
Sl. No. Description Unit Rate
Rs. Ps.
14.48.1 _do_ using 19mm thick granite width not less than 1200mm Sqm 2,556.00
14.48.2 _do_ using 10mm thick granite slab Sqm 1,582.00
14.49 Providing and fixing of wall cladding using 20mm thick gang saw Sqm 3,527.00
water cut Shiva gold granite, grey granite in CM 1:3 proportion
cut to required shape, pattern with paper joints, finished with cement
mortal using white cement and colour pigments to match the colour of
slab making through jointing with sealant, making holes 25mmx12mm
grooves in joints including cost of all materials, mortar, labour, curing
etc., complete as per specification.
14.50 "Providing and fixing skirting of 300mm height using prepolished water m 698.00
cuUgang saw of 19mm thick grey granite 0.5mm wide chamfered width
and depth and fixing in CM 1:4 of 20mm thick after chipping the walls
etc., including cost of all materials, mortar, labour, curing etc., complete
as per specification.
14.51 Providing and laying Hassan Green granite flooring for staircase, Sqm 3,987.00
treads and rises using pre polished 20 mm thick water cut green
Granite slab laid over existing cement concrete bed in CM 1:3, average
20mm thick including full rounding for nosing, cutting 3 line grooves not
more than 2 mm wide for antiskidding, including cost of all materials,
mortar, labour, curing etc., complete as per specification.
14.52 Providing and laying platform using prepolished, water cut I gang Sqm 3,614.00
saw 40mm thick telephonic Black Granite. laid on existing vertical
-supports and fixing in CM 1:3 proportion. Including cutting to required
shape, pattern with paper joints, including full rounding for nosing,
finished with cement mortar, pointed with colour pigments to match
the colour of slab making through jointing with sealant, making holes
25mm x 12mm grooves in joints including cost of all materials, mortar,
labour, curing etc., complete as per specification.
14.53 Providing full nosing for 40mm thick granite slab using required m 475.00
machinery including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification
14.54 Providing half nosing for 40mm thick granite slab using required m 317.00
machinery including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification
14.55 Providing full nosing for 20mm thick granite slab using required m 238.00
machinery including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification
108
Sl. No. Description Unit Rate.
Rs. Ps.
I
14.56 Providing half nosing for 20mm thick granite slab using required m 158.00
machinery including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification
14.57 Providing and fixing for flooring 40mm thick sadarhalli grey flammed Sqm 1,891.00
granite slab for bath areas in Bathrooms over a bed of 25mm thick CM
1 :6 and fixing granite slab with CM 1:3.
14.58 Providing and fixing granite flooring in combination of 19mm thick Sqm 3,722.00
(Avg) gang saw water cut LAKARED granite with 86% and with 14% of
19mm thicl (avg) Black granite in CM 1 :4 proportion with a coat of rough
plastering using CM 1 :4, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to
match the colour of slab making through jointing with sealant, grooves
in joints including cost of curing etc., complete including cost and
conveyance of all materials, mortar, labour for all items of work, HOM
of equipment etc., complete as per specification
14.59 Providing and fixing for flooring 20mm thick gang saw water cut Sqm 2,631.00
telephonic black granite in CM 1:4 proportion with a coat of rough
plastering using CM 1:4, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to
match the colour of slab making through jointing with sealant, grooves in
joints including cost of curing etc., complete including cost and conveyance
of all materials, mortar, labour for all items of work, HOM of equipment etc. ,
complete as per specification
14.60 Providing and fixing 20mm thick gang saw water cut LAKARED Sqm 3,695.00
granite for cladding in CM 1:4 proportion with a coat of rough plastering
using CM 1:4, cut to required shape, pattern with paper joints, finished
with cement mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant, grooves in joints
including cost of curing etc., complete including cost and conveyance of
all materials, mortar, labour for all items of work, HOM of equipment etc.,
complete as per specification.
14.61 Providing and fixing for flooring 20mm thick gang saw water cut
sadarhalli grey granite in CM 1:4 proportion, cut to required shape,
pattern with paper joints, finished with cement mortar using white
cement and colour pigments to match the colour of slab making through
jointing with sealant, groves in joints including cost of including cost of
all materials, mortar, labour, curing etc., complete as per specification.
14.61.1 - do - minimum width of 1200mm Sqm 1,986.00
14.61 .2 - do - minimum width of 900mm Sqm 1,889.00
14.62 Providing and laying/fixing cement base, precast, pre polished Sqm 1,085.00
cement concrete, designer tiles 25mm thick for flooring conforming
to IS 1237 heavy duty tiles for flooring, treads of steps and landing,
laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush
pointing using white cement, including cost of materials, mortar, including
cutting, griding the edge to half/full round wherever required , labour,
curing complete as per specification.
109
Sl. No. Description Unit Rate
Rs. Ps.
14.63 Providing and fixing Ceramic tiles of size 400x400mm for flooring, Sqm 1,075.00
threads, steps and landing, laid on a bed of 20mm thick cement mortar
1:3 mix flush pointing with white cement mixed with matching colour
pigment including curing, cleaning etc., complete. The work includes
cost of all materials, mortar, labour charges for all items of work, hire
charges for equipment, etc., complete as per specification.
14.64 Providing and fixing colour glazed tiles of size 300mmx600mm for Sqm 1,164.00
walls with borders of size 300x1 OOmm, set in Cement Mortar 1:3 and
pointed with white cement with matching colour pigment with necessary
curing, cleaning including providing and removing scaffolding wherever
necessary etc., complete. The work includes cost of all materials, mortar,
labour charges for all items of work, hire charges for equipment etc.,
complete as per specification.
14.65 Providing and fixing colour glazed tiles of size 300mmx450mm for Sqm 957.00
walls with borders of size 300x1 OOmm, set in Cement Mortar 1:3 and
pointed with white cement with matching colour pigment with necessary
curing, cleaning including providing and removing scaffolding wherever
necessary etc., complete. The work includes cost of all materials, mortar,
labour charges for all items of work, hire charges for equipment etc.,
complete as per specification.
14.67 Providing and fixing of wall cladding using 20 mm thick gang saw water cut
granite in CM 1:3 proportion cut to required shape patron with paper joint
finished with cement mortar using white cement and colour pigments to
match the colour of slab making through jointing with sealant, making holes
25mm x 12mm grooves in joints including cost of all materials, mortar,
labour, curing etc., complete as per specification.
14.67.1 - do- with grey granite 20mm thick gang saw with minimum width 1200 Sqm 2,295.00
14.67.2 - do- with sadharalli 20mm thick gangsaw with minimum width 1200 Sqm 2,1 62.00
14.68 Providing and fixing of clay tiles for cladding tiles of size 230x75x1 Omm Sqm 1,650.00
thick on 12mm thick cement mortar 1:3 &jointed with Adhesive I cement
slurry over rough plaster surface excluding cost of rough plasterd surface
and the surface is painted with red apex paint and black apex paint into
the groves. Including cost of all materials, mortar, labour, curing etc.,
complete as per specification.
14.69 Supplying, fabricating and fixing of Stainless steel cladding for walls using Sqm 12,800.00
304 grade Stainless steel16 guage sheet wall cladding of thickness over
the frame made out of 50x50mmx3mm thickness anodized qluminium
frame work at an equal distance of 2ft vertifically fixed to the wall using
1OOmm screws, guttas, anchor bolts and fastners with all necessary
bending and cutting as per the desing and site condition. The frame
work finally to be finished with 12mm BWP plywood to receive the SS
sheet on it uniformly. Including cost of all materials, mortar, labour, curing
etc., complete as per specification.
14.70 Providing and laying of teak wooden polished flooring of 12mm thick, Sqm 4,950.00
high density timber of approved colour and design with end trims,
transition, profiles, beading, 15mm thick felt, and 20 micron polyester
film with 4mm thick foam underlay etc., including cost of all mateirals,
mortar, labour, curing etc., complete as per specification.
110
Sl. No. Description Unit Rate
Rs. Ps.
14.71 Providing and laying of Modular wooden polished flooring of 12mm Sqm 2,900.00
thick, high density timber of approved colour and design with end trims,
transition, profiles, beading, 15mm thick felt, and 20 micron polyester
film with 4mm thick foam underlay etc., including cost of all materials,
mortar, labour, curing etc. , complete as per specification.
14.72 Providing Venyl flooring of approved quality and make, fixed on the top Sqm 625.00
of existing flooring fixed with suitable adhesive, including cutting to
the requ ied size and fixing etc., complete licluding cost of all materials,
mortar, labour, curing etc., complete as per specification .
Note: Lift charges: The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.1.50/sqm per floor may be added
for every additional floor for items vide SI.No.14.1 to 14.72.
111
FINISHING WORK
112
51. No. Description Unit Rate
Rs. Ps.
15.1 KSRB 15.1.1 Providing flush pointing to square rubble, course or Sqm 97.00
uncoursed stone masonry with cement mortar 1:3, 20mm deep, after
raking joints to depth of 20mm nicely lining, including cost of materials,
labour, curing complete as per specifications.
15.3 KSRB 15.1 .3- do- Providing ruled pointing to coursed stone masonry Sqm 98.00
with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm
nicely lining, including cost of materials, labour, curing complete as per
specifications.
15.5 KSRB 15.1.5 Providing raised and cut pointing to coursed stone Sqm 143.00
masonry with cement mortar 1:3, 20mm, after raking joints to depth of
20mm nicely lining, including cost of materials, labour, curing complete
as per specifications.
15.7 KSRB 15.2.1 Providing flush pointing to stone slab pavements, with Sqm 34.00
cement mortar 1:3, after raking joints, nicely lining , including cost of
materials, labour, curing complete as per specifications.
15.8 KSRB 15.2.2 Providing ruled pointing to stone slab pavements with Sqm 35.00
cement mortar 1:3, 20mm deep, after raking joints , including cost of
materials, labour, curing complete as per specifications.
15.9 KSRB 15.3.1 Providing 12mm thick cement plaster in single coat Sqm 181.00
with cement mortar 1 :3, to brick masonry including rounding off
corners wherever required smooth rendering , : Providing and removing
scaffolding, including cost of materials, labour, curing complete as per
specifications.
15.12 KSRB 15-3.4 : Providing 15mm thick cement plaster in single Sqm 205.00
coat with cement mortar 1:3, to brick masonry including rounding off
corners wherever required smooth rendering, : Providing and removing
scaffolding, including cost of materials, labour, curing complete as per
specifications.
15.15 KSRB15-3 .7 : Providing 18mm thick cement plaster in single Sqm 244.00
coat with cement mortar 1:3, to brick masonry including round ing off
113
51. No. Description Unit Rate
Rs. Ps.
15.1 8 KSRB 15-3.1 0 : Providing 20mm thick cement plaster in single coat Sqm 259.00
with cement mortar 1 :3, to stone masonry & concrete surface including
rounding off corners wherever requ ired smooth rendering, including
providing and removing scaffolding, cost of materials, labour, curing
etc., complete as per specification.
15.21 KSRB15-3-13 : Providing 12mm thick cement plaster in single Sqm 193.00
coat with cement mortar 1:3, to ceiling incl uding rounding off corners
wherever required smooth rendering, including providing and removing
scaffolding, cost of materials, labour, curi ng etc., complete as per
specification.
15.23 KSRB 15-4.1 Extra for providing and mixing waterproofing compound Sqm 7.00
in cement plaster work at one kg per bag or in the proportion
recommended by the manufacturers, for cement mortar 1:3, 12mm
thick cost of materials complete as per specifications.
15.24 KSRB 15-4.2 -do- cement mortar 1 :4, 12mm thick Sqm 6.00
15.25 KSRB 15-4.3 -do- cement mortar 1 :4, 15mm thick Sqm 7.00
15.26 KSRB 15-4.4 -do- cement mortar 1 :4, 18mm thick Sqm 8.00
15.27 KSRB 15-4.5 Extra for providing and mixing waterproofing compound Sqm 9.00
in cement plaster for stone masonry work at one kg per bag or in the
proportion recommended by the manufacturers, for cement mortar 1 :4,
20mm thick cost of materials complete as per specifications.
15.28 KSRB 15-4.6 Extra for providing and mixing waterproofing compound Sqm 13.00
in cement plaster for birck masonry work at one kg per bag or in the
proportion recommended by the manufacturers, for cement mortar 1 :3,
20mm thick cost of materials complete as per specifications.
15.29 KSRB 15-4.7 Extra for providing and mixing waterproofing compound Sqm 10.00
in cement plaster for brick masonry work at one kg per bag or in the
proportion recommended by the manufacturers, for cement mortar 1 :4,
20mm thick cost of materials complete as per specifications.
15.30 KSRB 15-5.1 : Providing rough cement plastering 15mm thick in Sqm 177.00
single coat with cement mortar 1 :4, to brick masonry for base of
dadooing works with sand of approved quality, providing and removing
114
51. No. Description Unit Rate
Rs. Ps.
15.32 KSRB15-6 : Providing floating coat of cement to plastering and Sqm 19.00
finishing smooth, including cost of materials, labour, curing complete
as per specifications.
15.33 KSRB15-7 : Providing lime rendering for plastering to wall and Sqm 25.00
ceiling, including cost of materials, labour, curing complete as per
specifications.
15.34 KSRB 15.8.1 Providing and fixing plaster mesh 1OOmm wide m 28.00
manufactured out of hot dipped galvanised iron of nominal thickness
0.35mm with a zinc coating of 120gms persqm width, along route of walls
chipped for services, junction between RCC and brick walls including
cost of materials, labour for fixing complete as per specifications. (length
of mesh only be measured for payment )
15.37 KSRB 15.9 Providing and fixing corner beads 45x45mm size m 26.00
manufactured out of hot dipped galvanised iron of nominal thickness
0.35mm with a zinc coating of 120gms per sqm width, along exposed
corners of walls, coloumns, lintels including cost of materials, labour
for fixing complete . (length of mesh be measured for payment)
15.38 KSRB 15.10.1 Providing white washing to new wall surface in two Sqm 8.00
coats with lime of approved quality, to give an even shade including
cost of materials, labour, complete as per specifications.
15.39 KSRB 15.10.2 Providing white washing for every one additional coat Sqm 4.00
with lime of approved quality, to give an even shade including cost of
materials, labour, complete as per specifications.
15.40 KSRB 15.10.3 Providing white washing to ceiling and I or sloping Sqm 9.00
roof surface in two coats with lime of approved quality, to give an even
shade including cost of materials, labour, complete as per specifications.
15.41 KSRB 15.10.4 Providing white washing to ceiling and I or sloping Sqm 4.00
roof surface with additional one coat with lime of approved quality, to
give an even shade including cost of materials, labour, complete as per
specifications.
15.42 KSRB 15.11.1 Providing cement washing to rough wall surface in Sqm 7.00
one coat with portland cement slurry to give an even shade after
throughly brooming the surface to remove all dirt, dust, mortar drops
and other foreign matter including cost of materials, labour, complete
as per specifications.
115
Sl. No. Description Unit Rate
Rs. Ps.
15.43 KSRB 15.11.2 Providing cement washing on iron surface in one Sqm 72.00
coat with portland cement slurry mixed with boiled linseed oil to give
an even surface after thoroughly cleaning the surface to remove all dirt,
dust, mortar drops and other foreign matter including cost of materials,
labour, complete as per specifications.
15.44 KSRB 15.12.1 Providing Go pi colour washing to new wall surface Sqm 11.00
in two coats with lime and gopi colour of approved quality, to give an
even shade after thoroughly brooming the surface to remove all dirt,
dust, mortar drops and other foreign matter including cost of materials,
labour, complete as per specifications.
15.45 KSRB 15.12.2 Providing Gopi colour washing to new wall surface in Sqm 6.00
one coat with lime and gopi colour of approved quality, to give an even
shade after thoroughly brooming the surface to remove all dirt, dust,
mortar drops and other foreign matter including cost of materials, labour,
complete as per specifications.
15.46.2 KSRB 15-13.2 : Extra over Item 15-13.1 for applying one coat of Sqm 2.00
distemper primer over ceiling and I or sloping roof as per specifications.
15.47 KSRB 15-13.3 : Providing and applying two coats dry distemper of
approved brand, and shade on wall surface including priming coat and
whitening after throughly brooming the surface to remove all dirt, dust,
mortar drops and other foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour, complete as
per specifications.
15.47.2 KSRB 15-13.4: Extra over Item 15-13.3 for applying distemper primer Sqm 4.00
over ceiling and I or sloping roof as per specifications.
15.48 KSRB 15-13.5 : Providing and applying one coat on old surface
dry distemper of approved brand, and shade on wall surface after
thoroughly brooming the surface clean of all gease, dirt, loose pieces
of scales including preparing the surface even and sand paper smooth,
cost of material, labour, complete as per specifications.
15.48.2 KSRB 15-13.6: Extra over Item 15-13.5 for applying distemper over Sqm 1.00
ceiling and /or sloping roof as per specifications.
116
Sl. No. Description Unit Rate
Rs. Ps.
15.48.3 KSRB 15-13.7 : Extra for providing and applying every subsequent cost Sqm 10.00
of dry distemper of approved brand , for item no. 15-13.3 and 15-13.5
of approved shade on wall surface cost of materials, labour, complete
as per specifications.
15.49 KSRB 15-14.1 : Providing and applying two coats with oil bound
washable distemper of approved brand and shade on wall surface
including priming coat with distemper primer after throughly brooming
the surface free from mortar drops and other foreign matter including
preparing the surface even and sand paper smooth, cost of materials,
labour, complete as per specifications.
15.50 KSRB 15-14.3 : Providing and applying one coat with oil bound
washable distemper of approved brand and shade on wall surface to
give an even shade after throughly brooming the surface free from all
grease, dirt, loose peases of scales, including preparing the surface
even and sand paper smooth, cost of materials, labour, complete as
per specifications.
15.51 KSRB 15-15.1 : Providing and applying painting in two coats with
plastic emulsion paint of approved brand on wall surface to give an
even approved shade after thoroughly brushing the surface, free from
mortar drops and other foreign matter including preparing the surface
even and sand paper smooth, cost of materials, labour, complete as
per specifications.
15.52 KSRB 15-15.3 : Providing and applying painting in one coat with
plastic emulsion paint of approved brand and manufacture on wall
surface to give an even approved shade after thoroughly brushing
the surface, free from mortar drops and other foreign matter including
preparing the surface even and sand paper smooth , cost of materials,
labour, complete as per specifications.
117
Sl. No. Description Unit Rate
Rs. Ps.
15.52.2 KSRB 15.15.4 : Extra over Item 15-15.3 for painting with one coat Sqm 3.00
plastic emulsion paint of approved brand and shade on ceiling and I or
sloping roof as per specifications.
15.52.3 KSRB 15-15.5 : Extra for providing and applying every subsequent coat Sqm 30.00
of painting with plastic emulsion paint of approved brand and shade
for Item no.15-15.1 and 15-15.3 cost of materials, labour, complete as
per specifications.
15.53 KSRB 15-16.1 : Providing and finishing external walls in two coats
with waterproof cement paint of approved brand and shade to give
an even shade after throughly brooming the surface to remove all dirt
and loose powdered material, free from mortar drops and other foreign
matter cost of materials, labour, complete as per specifications.
15.53.3 KSRB 15-16.3 : Extra for providing and applying every subsequent coat Sqm 27.00
of waterproofing cement paint of approved brand and shade for Item
no.15-16. 1 cost of materials, labour, complete as per specifications.
15.54 KSRB 15-16.2 : Providing and finishing external walls in one coat with
waterproof cement paint of approved brand and shade to give an even
shade after throughly brooming the surface to remove all dirt and loose
powdered material, free from mortar drops and other foreign matter cost
of materials, labour, complete as per specifications.
15.54.3 KSRB 15-16.3 : Extra for providing and applying every subsequent Sqm 27.00
coat of waterproofing cement paint of approved brand and shade for
Item no.15-16.1 and 15-16.2 cost of materials, labour, complete as per
specifications.
15.55 KSRB 15-17.1 : Applying priming coat over new wood surface Sqm 33.00
and I or wood based surface with white lead paint priming including
preparing the surface after thoroughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting ready mix paint including
cost of materials, labour, complete as per specifications.
15.56 KSRB 15-17.2 : Applying priming coat over new wood surface and Sqm 36.00
I or wood based surface after brushing with wood primer pink paint
including preparing the surface after thoroughly cleaning oil, grease,
dirt and foreign matter, sand papering and knotting ready mix paint
including cost of materials, labour, complete as per specifications.
118
Sl. No. Description Unit Rate
Rs. Ps.
15.57 KSRB 15-17.3 : Applying priming coat over new wood surface and Sqm 32.00
I or wood based surface after brushing with aluminium paint primer,
water resistant including preparing the surface after thoroughly cleaning
oil, grease, dirt and foreign matter, sand papering and knotting ready mix
paint including cost of materials, labour, complete as per specifications.
15.58 KSRB 15-17.4 : Applying priming coat over new wood surface Sqm 31.00
and I or wood based surface, after brushing with ready mix enamel
priming paint including preparing the surface after thoroughly cleaning
oil, grease, dirt and foreign matter, sand papering and knotting ready mix
paint including cost of materials, labour, complete as per specifications.
15.59 KSRB 15-17.5 : Applying priming coat over new wood surface and Sqm 41.00
I or wood based surface after preparing the surface after throughly
cleaning oil, grease, dirt and foreign matter, sand papering and knotting
liquid wood filler, for varnish including cost of materials, labour, complete
as per specifications.
15.60.1 KSRB 15-17.6 : Providing and applying painting two coats (excluding Sqm 84.00
priming coat ) on new wood surface and I or wood based surface
with enamel paint to give an even shade, cleaning the surface of all
dirt, dust and foreign matter, sand papering including cost of materials,
labour, complete as per specifications.
15.60.2 KSRB 15-17.8 : Extra over Item No. 15-17.6 for applying every Sqm 48.00
subsequent coat of enamel paint to give an even shade after cleaning
the surface of all dirt, dust and foreign matter, sand papering including
cost of materials, labour, complete as per specifications.
15.61 .1 KSRB 15-17.7 : Providing and applying painting one coat (excluding Sqm 52.00
priming coat ) on new wood surface and I or wood based surface
with enamel paint to give an even shade after cleaning the surface of all
dirt, dust and foreign matter, sand papering including cost of materials,
labour, complete as per specifications.
15.61 .2 KSRB 15-17.8 : Extra over Item No.15-17.7 for applying every Sqm 48.00
subsequent coat of enamel paint to give an even shade after cleaning
the surface of all dirt, dust and foreign matter, sand papering including
cost of materials, labour, complete as per specifications.
15.62.1 KSRB 15-17.9 : Applying varnish two coats (excluding priming coat) Sqm 65.00
on new wood surface and I or wood based surface undercoating with
flatting varnish and finishing coat with varnish to give an even shade after
cleaning the surface of all dirt, dust and foreign matter, sand papering
so as to produce smooth dry, mat surface including cost of materials,
labour, complete as per specifications.
15.62.2 KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.10 for applying Sqm 32.00
every subsequent coat of varnish to produce a smooth dry and mat
surface after cleaning the surface of all dirt, dust and foreign matter,
including cost of materials, labour, complete as per specifications.
119
Sl. No. Description Unit Rate
Rs. Ps.
15.63.1 KSRB 15-17.10: Providing and applying varnishing one coat Sqm 36.00
(excluding priming coat) on previously varnished wood I or wood
based surface to give an even surface after cleaning the surface of all
dirt, dust and foreign matter, sand papering so as to produce a smooth
dry and mat surface, including cost of materials, labour, complete as
per specifications.
15.63.2 KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.1 0 for applying Sqm 32.00
every subsequent coat of varnish to produce a smooth dry and mat
surface after cleaning the surface of all dirt, dust and foreign matter,
including cost of materials, labour, complete as per specifications.
15.64 KSRB 15-17.12 : Providing and applying polishing with french polish Sqm 135.00
on new wood surface and I or wood based surface to give an even
surface after cleaning the surface of all dirt, dust and foreign matter,
sand papered smooth, including cost of wood filler and materials, labour,
complete as per specifications.
15.65 KSRB 15-17.13 : Providing and applying polishing with french polish Sqm 70.00
over previously polished wood or wood based surface to give an
even surface after cleaning the surface of all dirt, dust and foreign matter,
sand papered smooth, including cost of wood filler and materials, labour,
complete as per specifications.
15.66 KSRB 15-17.14 : Providing and applying wax polish in two coats on Sqm 68.00
new wood surface and I or wood based surface, with bees wax polish
in proportion of 2:1.5:1:0.5 (2 bees wax : 1.51inseed oil: 1 turpentine oil:
0.5 varnish by weight) to give an even surface after cleaning the surface
of all dirt, dust and foreign matter, sand papered smooth, including cost
of materials, labour, complete as per specifications.
15.67 KSRB 15-17.15 : Providing and applying wax polish in single coat on Sqm 34.00
new wood surface and I or wood based surface, with bees wax polish
in proportion of 2:1.5:1 :0.5 (2 bees wax: 1.51inseed oil : 1 turpentine oil :
0.5 varnish by weight) to give an even surface after cleaning the surface
of all dirt, dust and foreign matter, sand papered smooth, including cost
of materials, labour, complete as per specifications.
15.68 KSRB 15-17.16 : Providing and applying painting two coats Sqm 39.00
(excluding priming coat) on new wood surface and I or wood based
surface with coal tar paint to give an even shade after cleaning the
surface of all dirt, dust and foreign matter, including cost of materials,
labour, complete as per specifications.
15.69 KSRB 15-17.17 : Providing and applying painting one coat (excluding Sqm 26.00
priming coat) on new wood surface and I or wood based surface with
coal tar paint to give an even shade after cleaning the surface of dirt,
dust and foreign matter, including cost of materials, labour, complete
as per specifications.
120
Sl. No. Description Unit Rate
Rs. Ps.
15.70 KSRB 15-17.18 : Providing and applying painting one coat Sqm 22.00
(excluding priming coat) on previously painted wood surface and
I or wood based surface with coal tar paint to give an even shade after
cleaning the surface of all dirt, dust and foreign matter, including cost
of materials, labour, complete as per specifications.
15.71 KSRB 15-17.19: Providing and applying painting one coat (excluding Sqm 46.00
priming coat) on previously painted wood surface and I or wood
based surface with enamel paint to give an even shade after cleaning
the surface of all dirt, dust and foreign matter, including cost of materials,
labour, complete as per specifications.
15.72 KSRB 15-17.20: Applying additional one coat (excluding priming Sqm 42.00
coat) on previously painted wood surface and I or wood based
surface with enamel paint to give an even shade after cleaning the
surface of all dirt, dust and foreign matter, including cost of materials,
labour, complete as per specifications.
15.73 KSRB 15-18.1 : Applying red lead ready mix priming coat over Sqm 29.00
new steel or other metal surface including preparing the surface
after throughly cleaning oil, grease, dirt and other foreign matter, and
scoured with wire brushes, fine steel wool, sand papers including cost
of materials, labour, complete as per specifications.
15.74 KSRB 15-18.2 : Providing and applying enamel metal paint two Sqm 82.00
coats (excluding priming coat) over new steel or other metal
surface brushing to give an even shade after cleaning oil, grease, dirt
and other foreign matter, including cost of materials, labour, complete
as per specifications.
15.75 KSRB 15-18.3: Providing and applying enamel metal paint one coat Sqm 51.00
(excluding priming coat) on previously painted steel or other metal
surface brushing to give an even shade after cleaning oil, grease, dirt
and other foreign matter, including cost of materials, labour, complete
as per specifications.
15.76 KSRB 15-18.4: Providing and applying aluminium paint two coats Sqm 56.00
(excluding priming coat ) over new steel or other metal surface
brushing to give an even shade after cleaning oil, grease, dirt and
other foreign matter, including cost of materials, labour, complete as
per specifications.
15.77 KSRB 15-18.5: Providing and applying aluminium paint one coat Sqm 35.00
(excluding priming coat) on previously painted steel or other metal
surface brushing to give an even shade after cleaning oil, grease, dirt
and other foreign matter, including cost of materials, labour, complete
as per specifications.
15.78 KSRB 15-18.6 : Providing and applying black japan paint one coat Sqm 33.00
(excluding priming coat) on previously painted steel or other metal
surface brushing to give an even shade after cleaning oil, grease, dirt
and other foreign matter, including cost of materials, labour, complete
as per specifications.
121
Sl. No. Description Unit Rate
Rs. Ps.
15.79 KSRB 15-18.7 : Extra for applying every subsequent black japan paint Sqm 30.00
on previously painted steel or other metal surface brushing to give an
even shade after cleaning of oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
15.80 KSRB 15-19.1 : Providing and applying ready mix priming coat Sqm 26.00
over concrete I masonry I asbestos cement sheet I plastered surfaces
including preparing the surface after thoroughly cleaning of oil, grease,
dirt and other foreign matter, and sand papering including cost of
materials, labour, complete as per specifications.
15.81 KSRB 15-19.2: Providing and applying spray painting in two coats Sqm 66.00
(excluding priming coat ) over concrete I masonry I asbestos cement
sheet I plastered surfaces with flat wall paint of approved brand to give
even shade after cleaning the surface of all dirt, dust and other foreign
matter, and sand papering including cost of materials, labour, complete
as per specifications.
15.82 KSRB 15-19.3: -do- spray painting in one coat Sqm 42.00
15.83 KSRB 15-20.1 : Providing and applying floor painting with ready mix Sqm 50.00
paint in two coats (excluding priming coat) on new concrete I asbestos
cement sheet I plastered surfaces brushing to give an even shade after
preparing the surface after thoroughly cleaning oil, dirt, dust other foreign
matter and sand papering including cost of materials, labour, complete
as per specifications.
15.84 KSRB 15-20.2 : -do- one coat Sqm 32.00
15.85 KSRB 15-21.1 : Providing and applying wax polish on new concrete Sqm 28.00
floor and vertical plastered surface using approved brand to give an even
shade after preparing the surface after thoroughly cleaning oil, dirt, dust
other foreign matter, including cost of materials, labour, complete as
per specifications.
15.86 KSRB 15-21.2 : -do- previously polished concrete floor Sqm 27.00
15.87 KSRB 15-22.1 : Providing marble chips skirting or dadoing (upto Sqm 1,075.00
30cms height) rubbed and polished to granolithic finish, top layer 6mm
thick with white, black, chocolate, grey, yellow or baroda green marble
chips from smallest to 4mm nominal size dark shade pigment with
ordinary cement (in top layer only) laid in cement marble powder 3:1
(3 cement : 1 marble powder by weight) in proportion of 4:7 (4 cement
marble powder mix : 7 marble chips by volume) overall thickness 24mm
(18mm thick under layer, 6mm thick top layer) in cement mortar of mix
1:3 including cost of materials, labour, complete as per specifications.
15.88 KSRB 15-22.2 : Providing marble chips skirting or dadoing (upto Sqm 1,125.00
30cms height) rubbed and polished to granolithic finish, top layer
6mm thick, with white, black, chocolate, grey, yellow or baroda green
marble chips from smallest to 4mm nominal size, light shade pigment
with white cement ( in top layer only ) laid in cement marble powder 3:1
(3 cement : 1 marble powder by weight) in proportion of 4:7 (4 cement
marble powder mix : 7 marble chips by volume ) overall thickness 24mm
( 18mm thick under layer, 6mm thick top layer ) in cement mortar of mix
1:3 including cost of materials, labour, complete as per specifications.
122
Sl. No. Description Unit Rate
Rs. Ps.
15.89 KSRB 15-22.3 : Providing marble chips skirting or dadoing (upto Sqm 1,110.00
30cms height) rubbed and polished to granolithic finish top layer 6mm
th ick with white, black, chocolate, grey, yellow or baroda green marble
chips from smallest to 4mm nominal size, medium shade pigment
with approximately 50% white cement and 50% ordinary cement
(in top layer only ) laid in cement marble powder 3:1 (3 cement :1 marble
powder by weight) in proportion of 4:7 (4 cement marble powder mix :
?marble chips by volume) overall thickness 24mm (18mm thick under
layer, 6mm thick top layer) in cement mortar of mix 1:3 including cost
of materials, labour, complete as per specifications.
15.90 KSRB 15-22.4 : Providing marble chips skirting or dadoing (upto Sqm 1,060.00
30cms height) rubbed and polished to granolithic finish top layer 6mm
thick with white, black, chocolate, grey, yellow or baroda green marble
chips from smallest to 4mm nominal size, white cement without any
pigment (in top layer only) laid in cement marble powder 3:1 ( 3 cement
: 1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble
powder mix: 7 marble chips by volume) overall thickness 24mm (18mm
thick under layer, 6mm thick top layer) in cement mortar of mix 1:3
including cost of materials, labour, complete as per specifications.
15.91 KSRB 15-22.5 : Extra labour for work in dado exceeding 30 ems in Sqm 19.00
height including cost of labour, complete as per specifications.
15.92 KSRB 15-23.1 : Providing pre-cast grey colour mosaic tiles 20mm m 274.00
thick with marble chips of white, black, chocolate, grey, yellow or
baroda green from smallest to 6mm nominal size, with ordinary cement
( in top layer only ) for skirting and rises of steps ( not exceeding 30cms
height) on 1Ocms thick cement mortar 1:3 jointed with neat cement slurry,
rubbed and polished to granolithic finish , including cost of materials,
labour, complete as per specifications.
15.93 KSRB 15-23.2 : Providing pre-cast mosaic tiles using light shade m 335.00
pigment with white cement 20mm thick with marble chips of white,
black, chocolate , grey, yellow or baroda green from smallest to
6mm nominal size, with ordinary cement (in top layer only} for skirting
and rises of steps (not exceeding 30cms height) on 1Ocms thick cement
mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.
15.94 KSRB 15-23.3 : Providing pre-cast mosaic tiles using medium shade m 289.00
pigment using approximately 50% white cement and 50% ordinary
cement 20mm thick with marble chips of white, black, chocolate, grey,
yellow or baroda green from smallest to 6mm nominal size, with ordinary
cement ( in top layer only ) for skirting and rises of steps ( not exceeding
30cms height) on 1Ocms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost
of materials, labour, complete as per specifications.
123
Sl. No. Description Unit Rate
Rs. Ps.
15.95 KSRB 15-23.4 : Providing pre-cast mosaic tiles of white shade with m 238.00
white cement without any pigment 20mm thick with marble chips of
white, black, chocolate, grey, yellow or baroda green from smallest to
6mm nominal size, with ordinary cement ( in top layer only ) for skirting
and rises of steps ( not exceeding 30cms height ) on 1Ocms thick
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished
to granolithic finish, including cost of materials, labour, complete as per
specifications.
15.96 Providing melamine polishing of approved shade including Sqm 721.00
removing and refixing of doors shutters scraping with blade and
rubbing with zero size sand paper and applying sealer coat by way of
spraying with necessary compressor and applying patty after rubbing
with steel wool including two coats of approved shade of melamine
polish etc. , complete.
15.97 Provid ing melamine polishing of approved shade including Sqm 907.00
removing and refixing of doors shutters, glass, beading and
existing polishing, scraping with blade and rubbing with zero size
sand paper and applying sealer coat by way of spraying with necessary
compressor and applying patty after rubbing with steel wool including
two coats of approved shade of melamine polish etc. , complete.
15.98 Providing and mixing Synthetic fibers 100% Virgin triangular
monofilament polyster fibers 6mm in cut length for use as micro
reinforcement for application at 125 grams per bag of cement I.e 0.25%
by weight of cement.
15.98.1 _do_ for CM 1:4, 20mm thick Sqm 5.50
15.98.2 _do_ for CM 1:4, 12mm thick Sqm 4.50
15.98.3 _do_ for CM 1:6, 20mm thick Sqm 4.00
15.98.4 _do_ for CM 1:6, 12mm thick Sqm 3.50
15.99 Providing and mixing Synthetic fiber 100% virgin triangular Sqm 11.50
monofilament polyester fibers for use as micro secondary reinforcement
in guitie and shotcrete civil works with application dosage of 125-175
grams per bag of cement i.e. 0.25%-0.30% by weight of cement.
15.100 Providing and mixing fiber mesh Harbourite fine fibrillated 100%
virgin polypropylene fibers contains no olefin materials and are
specially engineered manufactured to use as cementitious micro
reinforcement. Application @ 125 gms for 1:3 cement mortar, 150 gms
for 1:4 CM and 200 gms for 1:6 CM mix per bag of cement in both coats
of the plaster. Harbourite 12mm long shall be used in the back coat and
Harbourite 6 mm long fibers shall be used in the top coat. Fibermesh
Harbourite fibers should be confirming to ASTM C 1116 ACI 524-93.
124
51. No. Description Unit Rate
Rs. Ps.
15.104 Providing and finishing external walls in two coats over one coat of Sqm 151.00
100% acrylic silicon glazed primer with antifungal paint for top coat
of approved brand and shade to give an even shade after thoroughly
brooming the surface to remove all dirt and loose powdered material,
free from mortar drops and other foreign matter cost of materials, labour,
complete as per specifications.
15.1 05 Providing textured paint of approved quality, colour and shade to Sqm 348.00
wall surface after cleaning and rubbing the wall surface with wire brush
125
Sl. No. Description Unit Rate
Rs. Ps.
of medium size emery stone to remove all the loosely adhering particles,
the surface is then cleaned with water and ensured that it is in line and
level. The textured material is then mixed with 40-50% of clean water
until a homogeneous thick slurry is formed, the slurry is left for 5-10
min, to react completely with ingredients. The textured finish prepared
as above is then applied to the wall surface with suitable roller/spray
gun/putty/ blade/ trowel to get the desired finish. The finished surface
shall be applied with two coats of exterior paint of approved shade.
The rate includes providing and removing scaffolding, all lead and lift
and all other incidental charges etc., complete as per directions of the
Engineer-in-charge of the work.
15.106 Providing applying two coats of wall putty to inside plastered walls and Sqm 56.00
ceiling using white cement putty. Scrapping and levelling the surface
using steel blade and preparing the surface even and smooth by using
different grade sand papers, including cost of all materials, cost of labour
and scaffolding etc., complete as per the specification.
Area to be considered -
(a) 100% for fresh surface
(b) Upto 10 % for repainting
Note:
1. Lift charges: The above rates are applicable for Ground floor only.
An additional rate of Rs. 5.00/sqm per floor for inside plastering
works only may be added for every additional floor. Below or above
the ground floor.
2. Lift charges: The above rates are applicable for Ground floor.
An additional rate of Rs. 3.00/sqm per floor for painting works of
exterior walls only may be added for every additional floor.
126
REPAIRS TO BUILDINGS
127
Sl. No. Description Unit Rate
Rs. Ps.
128
Sl. No. Description Unit Rate
Rs. Ps.
16.6 KSRB 24-11 : Removing the old paint or polish from wood and I Sqm 30.00
or wood based surface with caustic soda solution and making surface
even including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.7 KSRB 24-12 : Removing the old paint from wood and I or wood Sqm 62.00
based surface with blow lamp and making surface even including cost
of materials, labour, complete as per specifications.
Specification No.KBS
16.8 KSRB 24-13 : Removing the old paint from steel and I or other metal Sqm 52.00
surface with hand scraping and making surface even including cost of
labour, complete as per specifications.
Specification No.KBS
16.9 KSRB 24-14: Removing the old paint from steel and I or other metal Sqm 62.00
surface with flame cleaning and making surface even including cost of
material , labour, complete as per specifications.
Specification No.KBS
16.10 KSRB 24-15 : Removing the old paint from steel and I or other metal Sqm 45.00
surface with paint remover of approved brand I manufacturer cleaning
and making surface even including cost of material, labour, complete
as per specifications.
Specification No.KBS
16.11 KSRB 24-16 : Fixing small pieces ( not exceeding 0.015 cum ) for Piece 16.00
making good wherever hinges etc., have been removed from frames
or joinery etc., with teak wood excluding cost of materials but including
cost of labour, complete as per specifications.
Specification No.KBS
16.12 KSRB 24-17 : Providing and fixing small pieces (not exceeding 0.015 Piece 187.00
cum) for making good wherever hinges etc., have been removed from
frames or joinery etc., with honne wood including cost of materials,
labour, complete as per specifications.
Specification No.KBS
16.14 KSRB 24-19:- do- Sal wood pieces (not exceeding 0.015 cum) Piece 124.00
16.15 KSRB 24-20 : Renewing bars, styles and rails, straight for joinery upto Piece 990.00
50mm thick including mitres, haunching , mortices etc., and removing
the old defective pieces and replacing with Teak wood including cost
of materials , labour, complete as per specifications.
Specification No.KBS
129
51. No. Description Unit Rate
Rs. Ps.
16.18 KSRB 24-23 : Rewedging, cramping joinery of any description with Leaf 356.00
new wedges in glue or white lead and repinning including rehanging or
refixing of shutters, hinges or pivots, not exceeding one sqm per leaf,
removing or dismantling excluding cost of wood but including cost of
labour, complete as per specifications.
Specification No.KBS
16.19 KSRB 24-24 : - do - exceeding one sqm but not exceeding two Leaf 472.00
sqm per leaf
16.20 KSRB 24-25 : -do- exceeding two sqm Leaf 668.00
16.21 KSRB 24-26 : Making repairs to joinery at angles with 300mm x
25mm x 3mm length of MS flat forged to shape and let into wood work, Each 80.00
counter sunk, drilled and screwed including cost of materials, labour,
complete as per specifications. Specification No.KBS
16.22 KSRB 24-27 : Renewing Honne wood battens in roof including cum 13,288.00
making good the holes in walls, removal of rubbish to the dumping round
with a lead upto 50 m including cost of materials, labour, complete as
per specifications. Specification No.KBS
16.23 KSRB 24-28 : -do- Matti I Nandi wood battens cum 11,053.00
16.24 KSRB 24-29: - do - Sal wood battens cum 9,422.00
16.25 KSRB 24-30 : Removal of old broken glass panes ( any thickness of Sqm 76.00
size, quality or description ) from wooden frames , glazed with putty or
fixed with beads including cost of labour, complete as per specifications.
Specification No.KBS
16.31 KSRB 24-36 : Removing the glazed tiles in patches in area exceeding Sqm 551 .00
10 tiles and not exceeding 5 sqm including removing old tiles preparing
surfaces and laying or setting new or old tiles complete including cost of
materials, (excluding cost of tiles) labour, complete as per specifications.
Specification No.KBS
130
51. No. Description Unit Rate
Rs. Ps.
16.41 Removing of existing old or broken wash basin I urinals and Each 203.00
disposing it with all cost and conveyance labour for all items of
work, HOM of equipment with all lead and lift, loading and unloading,
transportation charges and all other incidental charges etc., complete as
per specification and directions of the Engineer-in-charge of the work.
131
Sl. No. Description Unit Rate
Rs. Ps.
16.42 Removing of existing old or broken Water closet Indian I Eurpoean Each 187.00
and disposing it with all cost and conveyance labour for all items of
work, HOM of equipment with all lead and lift, loading and unloading,
transportation charges and all other incidental charges etc., complete as
per specification and directions of the Engineer-in-charge of the work.
16.43 Removing of existing old Sanitary and plumbing pipelines, stacking m 62.00
and disposing it with all cost and conveyance labour for all items of
work, HOM of equipment with all lead and lift, loading and unloading,
transportation charges and all other incidental charges etc., complete as
per specification and directions of the Engineer-in-charge of the work.
16.45 Cleaning stone parapets removing of dirt dust etc., using suitrable Sqm 1.00
soap powder, coconut broomstick, squeezers I wipers/ rubber
brushes, coir brushes, plastric brushjes, mugs, booster pumps with
portable arrangement, hose pipe etc., complete including cost of water
charges and electrical charges.
16.46 Cleaning Quadrangle chajjas including removing of dirt dust etc., Sqm 7.00
using suitrable soap powder, coconut broomstick, squeezers I
wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster
pumps with portable arrangement, hose pipe etc. , complete excluding
water charges including electrical charges and all safety measures.
16.47 Cleaning sub surface drains including removing of dirt dust etc., using m 10.00
suitrable soap powder , coconut broomstick, squeezers I wipers/
rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps
with portable arrangement, hose pipe etc., complete
16.48 Cleaning surface drains including removing of dirt dust etc., using m 6.00
suitrable soap powder , coconut broomstick, squeezers I wipers/ rubber
brushes, coir brushes, plastric brushjes, mugs, booster pumps with
portable arrangement, hose pipe etc., complete.
16.49 Cleaning of office floors, toilet floors, corridors, lobbies, partitions, Sqm 1.50
storage units, furniture , electrical & electronic equipments, doors,
windows, curtains, blinds etc., including cleaning of dust, etc., using
suitable bombay broom stick, squezers I wipers/rubber brushes, mop
sticks, coir brushes, bamboo baskets, plastic buckets, trolleys, wiping
cloths, carry bags, etc. ,removing the debris to the nearest garbage pit
complete.
132
ROADS AND BRIDGES -
CARRIAGE OF MATERIALS
133
51. No. Description Unit Rate
Rs. Ps.
17.1 KSRRB M100-1 Loading and Unloading of Stone Boulder I Stone cum 68.00
aggregates /Sand/ Kanker I Moorum.
KSRRB M 100-1 : Placing tipper at loading point, loading with front end
loader,dumping, turning for return trip, excluding time for haulage and return
trip complete as per specifications.
MORTH -1 00/ Chapter 1
17.2 KSRRB M100-2. Loading and Unloading of Stone Boulders by Manual cum 88.00
Means complete as per specifications.
MORTH -100/ Chapter 1
17.3 KSRRB M 100-3 Loading and Unloading of Cement or Steel by Manual Tonne 122.00
Means and as per specifications complete.
MORTH -100/ Chapter 1
17.4 KSRRB M100-4.1. Cost of Haulage Excluding Loading and Unloading t.km 2.50
MORTH -1 00/ Chapter 1
Case-1 : Surface Road
17.5 KSRRB M100-4.2. Haulage of materials by tipper excluding cost of t.km 2.60
loading, unloading and stacking complete as per specifications.
MORTH -100/ Chapter 1 Case-11: Unsurfaced Gravelled Road
17.6 KSRRB M 100-4.3. Haulage of materials by tipper excluding cost of loading, t.km 4.85
unloading and stacking complete as per specifications.MORTH Chapter
1 Case-lli: Katcha Track and Track in River Bed/Nallah Bed and Choe
Bed.
17.7 KSRRB M100-5. Supply of quarried stone, hand breaking into coarse cum 689.00
aggregate 63mm nominal size (passing 80 mm and retained on 50 mm
sieve) and stacking as directed complete as per specifications.
MORTH -1 00/ Chapter 1
17.8 KSRRB M 100-6. Crushing of stone boulders of 150 mm size in an cum 896.00
integrated stone crushing unit of 200 tonnes per hour capacity comprising of
primary and secondary crushing units, belt conveyor and vibrating screens
to obtain stone aggregates of 13.2 mm nominal size complete.
MORTH -100/ Chapter 1
17.9 KSRRB M100-7. -do- stone aggregates of 20 mm nominal size cum 901.00
17.10 KSRRB M100-8.- do- stone aggregates of 40 mm nominal size cum 805.00
134
ROADS
SITE CLEARANCE AND
DISMANTLING
135
51. No. Description Unit Rate
Rs. Ps.
18.14 KSRRB M200-10.2. - do- l. By Manual Means:B. In area ofthorny jungle. Ha 65,322.00
136
Sl. No. Description Unit Rate
Rs. Ps.
18.15 KSRRB M200-11.1 . Clearing and grubbing road land including uprooting Ha 20,725.00
rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removalof stumps of trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be used or auctioned,
including removal and disposal of top organic soil not exceeding 150 mm
in thickness complete as per specifications .
II. By Mechanical Means:A. In area of light jungle.
MORTH Specification No. 201
18.18 KSRRB M200-12.2. -do- i) Lime /Cement Concrete. I. By Manual Means cum 374.00
:B. Cement Concrete Grade M-15 & M-20.
18.19 KSRRB M200-12.3. -do- C. Prestressed I Reinforced cement concrete cum 1,022.00
grade M-20 & above.
18.20 KSRRB M200-13.1. -do- II. By Mechanical Means. A. Cement Concrete cum 345.00
Grade M-15 &M-20.
18.21 KSRRB M200-13.2. -do- By Mechanical Means. cum 601.00
18.22 KSRRB M200-14.1. Dismantling of existing structures like culverts, cum 179.00
bridges, retaining walls and other structure comprising of masonry, cement
concrete, wood work, steel work, including T&P and scaffolding wherever
necessary, sorting the dismantled material, disposal of unserviceable
material and stacking the serviceable material with all lifts complete as
per specifications. ii) Dismantling Brick I Tile work. A. In lime mortar.
MORTH Specification No. 202
18.23 KSRRB M200-14.2. -do- Dismantling brick/Tile work B.ln cement mortar. cum 244.00
18.24 KSRRB M200-14.3. -do- Dismantling brick/Tile work C. In mud mortar. cum 153.00
18.25 KSRRB M200-14.4. -do- Dismantling brick/Tile work D. Dry brick cum 140.00
pitching or brick soling.
18.26 KSRRB M200-15.1. Dismantling of existing structures like culverts, bridges, cum 205.00
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
iii) Dismantling Stone Masonry. A. Rubble Stone masonry in lime mortar.
MORTH Specification No. 202
137
Sl. No. Description Unit Rate
Rs. Ps.
18.27 KSRRB M200- 15.2. -do- B. Rubble stone masonry in cement mortar. cum 244.00
18.28 KSRRB M200- 15.3. -do- C. Rubble stone masonry in mud mortar. cum 179.00
18.29 KSRRB M200-15.4. -do- D. Dry rubble masonry. cum 166.00
18.30 KSRRB M200-15.5. -do- E. Dismantling stone pitching I dry stone cum 153.00
spalls.
18.31 KSRRB M200-15.6. -do- Dismantling brick/Tile work F. Dismantling cum 179.00
Boulders laid in wire crates including opening of crates and stacking
dismantled materials.
18.32 KSRRB M200-16. -do- iv) Dismantling wood work wrought framed and cum 438.00
fixed in frames of trusses upto a Height of 5m above Plinth Level.
18.33 "KSRRB M200-17.1. -do- v) Steel work in all types of Sections upto Tonne 1,202.00
a Height of 5 m above plinth level excluding Cutting of Rivet. - A.
Including dismembering."
18.34 KSRRB M200-17.2. -do- v)Steel work in all types of Sections upto Tonne 908.00
a Height of 5 m above plinth level excluding Cutting of Rivet- B.
Excluding dismembering.
18.35 -do- B for cutting rivets. RIVET 8.00
18.36 KSRRB M200-18.1 . -do- vi) Scraping of Bricks Dismantled from Brick Nos 1.00
work including Stacking -A. In Lime I Cement mortar.
18.37 KSRRB M200-18.2. - do- B. In mud mortar. Nos 0.50
18.38 KSRRB M200-19.1. -do- vii) Scraping of stones from dismantled stone cum 455.00
masonry- A. In cement and lime mortar.
18.39 KSRRB M200-19.2. -do- B. In mud mortar. cum 97.00
18.40 KSRRB M200-20. -do- viii) Scraping plaster in lime or cement mortar Sqm 14.00
from brick I stone masonry.
18.41 KSRRB M200-21.1 . -do- ix) Removal of all types of Hume pipes and stacking m 168.00
including earthwork and dismantling of masonry works- A. Upto 600 mm dia.
18.42 KSRRB M200-21.2. -do- Removal of all types of Hume pipes and m 228.00
stacking including earthwork and dismantling of masonry works- B.
Above 600 mm to 900 mm dia.
18.43 KSRRB M200-21.3. - do - Removal of all types of Hume pipes and stacking m 390.00
including earthwork and dismantling of masonry works C. Above 900 mm dia.
KSRRB M200. Dismantling of cement concrete pavement
18.47 KSRRB M200-24 . Dismantling of cement concrete pavement by cum 781.00
mechanical means using pneumatic tools, breaking to pieces not exceeding
0.02 cum in volume and stock piling at designated locations and disposal
of dismantled materials stacking serviceable and unserviceable materials
seperately complete as per specifications.
MORTH Specification No. 202
139
Sl. No. Description Unit Rate
Rs. Ps.
TYPICAL EXAMPLE FOR CALCULATION OF LEAD AND LIFT CHARGES (For Dismantling works)
Weights of materials
140
EARTHWORK,
EROSION CONTROL AND
DRAINAGE
141
51. No. Description Unit Rate
Rs. Ps.
KSRRB 300 - Excavation for road, drains and similar works cum 82.00
19.1 KSRRB 300-1. Earthwork excavation by manual means in ordinary soil
involving an average horizontal throw upto 2 meters and an average
lift upto 1.5 m, excavated surface leveled and sides neatly dressed, the
disposed earth to be leveled neatly after breaking of clods complete as
per specifications.
MORTH I Chapter 3
19.5 KSRRB 300-5. Excavation in soft rock with blasting for formation of cum 348.00
roads including stacking neatly, to uniform line and level including cost of
explosives, labour, HOM of machineries and equipments complete as per
specifications. (with all lead and lift)
MORTH I Chapter 3
19.6 KSRRB 300-6. - do- soft rock without blasting cum 750.00
19.7 KSRRB 300-7. Excavation in hard rock by blasting for formation of roads cum 468.00
including stacking to uniform line and level as directed by the engineer
including cost of explosives, labour, HOM of machineries and equipments
complete as per specifications. (with all lead and lift)
MORTH I Chapter 3
19.8 KSRRB 300-8. Excavation in hard rock by chiselling and I or wedging cum 1,128.00
where blasting is prohibited for formation of roads including stacking
to uniform line and level including cost of all labour complete as per
specifications. (with all lead and lift)
MORTH I Chapter 3
19.9 KSRRB M300-9. Excavation for roadway in all types soil using manual cum 146.00
means including loading in truck for carrying of cut earth to embankment
site complete as per specifications.
MORTH Specification No. 301
19.10 KSRRB M300-10. Excavation in ordinary rock using manual means cum 213.00
including loading in a truck and carrying of excavated material to
embankment site and complete as per specifications.
MORTH Specification No. 301
142
Sl. No. Description Unit Rate
Rs. Ps.
143
Sl. No. Description Unit Rate
Rs. Ps.
19.18 KSRRB M300-17. Excavation for road way in hard rock (controlled blasting) cum 203.00
with rock brakers including breaking rock, loading in tippers transporting
to stacking at site and trimming bottom and side slopes in accordance
with requirement of lines, grades and cross sections complete as per
specifications.
MORTH Specification No. 301
19.23 KSRRB M300 21.2. -do- B. Mechanical Means (i) Depth upto 3 m. cum 48.00
19.24 KSRRB M300-22 .1. -do-ii) Ordinary Rock (not requiring blasting) - cum 324.00
A. Manual Means (i) Depth upto 3m".
144
Sl. No. Description Unit Rate
Rs. Ps.
19.25 KSRRB M300-22.2. -do- ii)Ordinary Rock (not requiring blasting) - cum 47.00
B. Mechanical Means.
19.26 KSRRB M300-23. -do- iii) Hard Rock (requiring blasting) - A. Manual cum 516.00
Means.
19.27 KSRRB M300-24. -do- iv) Hard Rock ( blasting prohibited)- A. Mechanical cum 471.00
Means.
19.28 KSRRB M300-25.2.-do- v) Marshy soil -A. Manual Means (i) upto 3 m cum 469.00
depth
19.29 KSRRB M300-25.3. -do- vi) Marshy soil B) Mechanical means (ii) Upto cum 101.00
3m depth
19.30 KSRRB 300-26.1. Extra for every additional lead of 7.50 mtr. additional lead cum 3.50
beyond 15m but upto 60m by manual means for all kinds of soils except
hard rock including cost of all labour complete as per specifications.
MORTH Chapter 3
19.31 KSRRB 300-26.2. When lead is more than 60m upto 500m by any means cum 4.00
of conveyance including loading and unloading for all kinds of soils except
hard rock including cost of all labour complete as per specifications.
MORTH Chapter 3
19.32 KSRRB 300-27. Dressing of earthwork including cutting and filling upto cum 41.00
15 ems thick or depth including cost of all labour complete as per
specifications.
MORTH Chapter 3
19.33 KSRRB 300-28. Box cutting I trenching the sub grade to proper slope, Sqm 1.00
camber and removing inequalities including removing the stuff and
depositing on the road side slopes ( cutting of earthwork shall be paid
seperately in the respective item on the basis of classification of the
excavation) including cost of all labour complete as per specifications.
MORTH Chapter 3
KSRRB M300- Stripping and Storing of top soil
19.34 KSRRB M300-29. Stripping, Storing oftop soil by road side at 15 mt internal cum 181.00
and re-application on embankment slopes. Cut slopes and other areas in
localities where the available embankment material is not condusive to
plant growth by manual means complete as per specifications.
MORTH Specification No. 305
KSRRB M300-Stripping, Storing and Re-laying Top soil from Borrow
Areas in Agriculture Fields.
19.35 KSRRB M300-30. Stripping, Storing and Re-laying Top soil from Borrow cum 41.00
Areas in Agriculture Fields. Stripping of top soil from borrow areas located
in agriculture fields, storing at a suitable place, spreading and re-laying
after taking the borrow earth to maintain fertility of the agricultural field,
finishing it to the required levels and satisfaction of the farmer complete
as per specifications.
MORTH Specification No. 305
145
Sl. No. Description Unit Rate
Rs. Ps.
19.37 KSRRB M300-32. Preparation of seed bed on previously laid top soil, Sqm 68.00
furnishing and placing of seeds, fertilizer, mulching material , applying
bituminous emulsion at the rate of 0.23 litres per sqm and laying and fixing
jute netting, including watering for 3 months all as per Clause 308 complete
as per specifications.
MORTH Specification No. 308
19.42 KSRRB M300-36. Construction sub-surface drain with perforated pipe of m 515.00
100 mm internal diameter of metal I asbestos cement I cement concrete
I PVC, closely jointed, perforations ranging from 3mm to 6mm depending
upon size of crushed stone material surrounding the pipe, with 150mm
bedding below the pipe and 300mm cusion above the pipe, cross-section
of excavation 450x550mm. Excavated material to be utilised in roadway
at site complete as per specifications.
MORTH Specification No. 309
146
Sl. No. Description Unit Rate
Rs. Ps.
19.47 KSRRB M300-41. Excavation in Hilly Areas in Ordinary Rock by Mechanical cum 129.00
means not requiring Blasting. Excavation in hilly area in ordinary rock not
requiring blasting by mechanical means including cutting and trimming of
slopes and disposal of cut material and complete as per specifications.
MORTH Specification No. 301
19.48 KSRRB M300-42. Excavation in Hilly Areas in Hard Rock Requiring Blasting. cum 274.00
Excavation hilly areas in hard rock requiring blasting by mechanical means
including trimming of slopes and disposal of cut material and complete
as per specification.
MORTH Specification No. 301
147
Sl. No. Description Unit Rate
Rs. Ps.
19.57 KSRRB 300-51 . Making 50mm x 50mm furrows at 45° to the centre line of Sqm 3.00
the road and at one metre interval in the existing thin bituminous wearing
course including sweeping, taking out old materials, stacking the debris
cost of all labour charges complete as per specifications.
MORTH I Chapter 3
148
Sl. No. Description Unit Rate
Rs. Ps.
KSRRB 300-Compaction
19.64 KSRRB 300-58. Compaction of original ground with maximum of 6 passes Sqm 5.00
of 8 to 10 tonnes power roller including filling in depression occuring during
rolling including cost of all labour, HOM of machinery complete as per
specifications.
MORTH I Chapter 3
19.65 KSRRB M300-59.1. Loosening of the ground upto a level of 500mm below cum 52.00
the subgrade level, watered, graded and compacted in layers to meet
requirement of Table 300-2 for subgrade construction complete as per
specifications. Case-I:Compacting original ground supporting subgrade.
(which includes watering charges & compaction by vibratory roller)
MORTH Specification No. 305.3.4
19.66 KSRRB M300-59.2. Loosening, levelling and compacting origial ground cum 25.00
supporting embankment to facilitate placement of first layer of embankment,
scarified to a depth of 150mm, mixed with water at OMC and then compacted
by rolling so as to achieve minimum dry density as given in Table 300-2
for embankment construction. complete as per specifications. Case-11:
Compacting original ground supporting embankment.(which includes
watering charges & compaction by vibratory roller)
MORTH Specification No. 305.3.4
19.67 KSRRB 300-60. Extra for laying earth by manual means as per specifications cum 10.00
for compaction in 250mm thick loose layers when laying of earth in layers
is done simultaneously with excavation of earth work and dressing but
excluding rolling and watering including cost of all labour complete as per
specifications. MORTH I Chapter 3
19.68 KSRRB 300-61. Extra for laying earth by manual means as per specifications cum 43.00
for compaction in 250mm thick loose layers when laying of earth in layers
is done from stacked materials including breaking of clods and dressing
but excluding rolling and watering including cost of all labour complete as
per specifications.
MORTH I Chapter 3
19.69 KSRRB 300-62. Extra for laying earth by mechanical means as per cum 24.00
specifications for compaction in 250mm thick loose layers when laying of
earth in layers is done from stacked materials including breaking of clods
and dressing but excluding rolling and watering including cost of all labour,
HOM of machineries complete as per specifications.
MORTH I Chapter 3
19.70 KSRRB M300-63 . Construction of Embankment with Flyash I Pond cum 82.00
Ash available from Coal or Lignite Burning Thermal Plants as Waste
Material. Construction of embankment with flyash conforming to Table 1 of
IRC:SP:58-2001 obtained from coal or lignite burning thermal power stations
as waste material, spread and compacted in layer of 200mm thickness each
at OMC, all as specified in IRC:SP:58-2001 and as per approved plans
complete as per specifications.
19.71 KSRRB 300-64.1. Extra for watering the earth to bring the earth upto required cum 7.00
optimum moisture content manually including cost of all labour complete
as per specifications. MORTH I Chapter 3
149
51. No. Description Unit Rate
Rs. Ps.
19.72 KSRRB 300-64.2. Extra for watering the earth to bring the earth upto required cum 2.00
optimum moisture content with mechinery including cost of all labour, HOM
of machineries complete as per specifications.
MORTH I Chapter 3
19.73 KSRRB 300-65. Extra for rolling to specification with the use of vibratory cum 16.00
roller when earth is at suitable moisture content with desired field density
not less than 95% of maximum dry density ( modified heavy proctor test )
including HOM of machineries complete as per specifications.
MORTH I Chapter 3
19.74 KSRRB 300-66. Extra for rolling to specification with the use of vibratory cum 20.00
roller when earth is at suitable moisture content with desired field density not
less than 100% of maximum dry density ( modified heavy proctor test)
including HOM of machineries complete as per specifications.
MORTH I Chapter 3
19.75 KSRRB 300-67. Extra for rolling to specification with power roller when cum 8.00
earth is at suitable moisture content with desired field density not less than
95% of maximum dry density ( ordinary proctor test ) including HOM of
machineries complete as per specifications.
MORTH I Chapter 3
19.76 KSRRB 300-68. Extra for rolling to specification with power roller 8-1 0 cum 10.00
tonne when earth is at suitable moisture content with desired field density not
less than 100% of maximum dry density ( ordinary proctor test ) including
HOM of machineries complete as per specifications.
MORTH I Chapter 3
KSRRB M300-Horticulture
KSRRB M300-Spreading of sludge farm yard manure or/ and good earth
19.77 KSRRB M300-1 . Spreading of sludge farm yard manure or/ and good earth cum 65.00
in requ ired thickness (cost of sludge, farm yard manure or/and good earth
to be paid for separately) complete as per specifications.
MORTH Specification No. 307
150
51. No. Description Unit Rate
Rs. Ps.
.KSRRB M300- Maintenance of lawns with fine grassing for the first year
19.83 KSRRB M300-6. Maintenance of lawns with fine grassing for the first year Sqm 75.00
including watering etc complete as per specifications.
MORTH Specification No. 307
19.87 KSRRB M300- 8.2. -do- B) Maintenance of flowering plants and shrubs Km 1 ,43,078.00
in central verge for one year.
KSRRB M300- Planting of trees and their maintenance for one year
19.88 KSRRB M300-9. Planting of trees by the road side (Avenue trees) in 0.60 Each 703.00
m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm
yard/sludge manure, planting the saplings, backfilling the trench, watering,
fixing the tree guard and maintaining the plants for one year complete as
per specifications.
MORTH Specification No. 307
153
SUB BASES-BASES
(NON BITUMINOUS)
AND SHOULDERS
154
Sl. No. Description Unit Rate
Rs. Ps.
20.4.1 Close graded granular sub-base material as per 400-1 cum 1,618.00
For Grading- I Material
20.5.1. Close graded granular sub-base material as per 400-1 cum 1,459.00
For Grading I Material
155
Sl. No. Description Unit Rate
Rs. Ps.
KSRRB 400 Granular Sub-Base with Coarse Graded Material (table 400-2)
20.6 KSRRB M400-7. Construction of granular sub-base by providing Coarse
graded cushed stone aggregates of granite I trap I basalt material,
speading in uniform layers with motor grader on prepared surface,
mixing by mix in place method with rotavator at OMC, and compacting
with vibratory roller to achieve the desired density, complete as per
specifications. By mix in place method.
20.6.1 ForCoarse graded granular sub-base material as per 400-2 cum 1,433.00
For Grading I Material
20.6.2 For Grading II Material cum 1,493.00
20.6.3 For Grading Ill Material cum 1,372.00
KSRRB M400- Lime stabilization for improving subgrade
20 .7 KSRRB M400-8.1 . Layir:~g and spreading available soil in the subgrade cum 389.00
on a prepared surface , pulverising, mixing the spread soil in place with
rotavator with 3 per cent slaked lime having minimum content of 70
per cent of CaO, grading with motor grader and compacting with the
road roller at OMC to the desired density to form a layer of improved
subgrade complete as per specifications . A. By Mechanical means
MORTH Specification No. 402
20 .8 KSRRB M400-8.2. Lime Stabilisation for improving Subgrade Laying cum 406.00
and spreading available soil in the subgrade on a prepared surface ,
pulverising, mixing the spread soil in place with rotavator with 3 per cent
slaked lime having minimum content of 70 per cent of CaO, grading
with motor grader and compacting with the road roller at OMC to the
desired density to form a layer of improved subgrade. complete as per
specifications. B. By Manual means
MORTH Specification No. 402
KSRRB M400- Lime Treated Soil for Sub-Base
20.9 KSRRB M400-9. Providing , laying and spreading soil on a prepared cum 504.00
subgrade, pulverising, mixing the spread soil in place with rotavator with
3% slaked lime with minimum content of 70 per cent of CaO, grading
with motor grader and compacting with the road roller at OMC to achieve
atleast 98% of the maximum dry density to form a layer of sub-base
complete as per specifications.
MORTH Specification No. 402
157
Sl. No. Description Unit Rate
Rs. Ps.
158
Sl. No. Description Unit Rate
Rs. Ps.
20.25 KSRRB M400-22.2. -do- B. By mixing Plant Method. ( For 45 mm cum 1,707.00
maximum size) MORTH Specification No. 41 0
KSRRB M400- Lime, Flyash stabilised Soil Sub-base. cum 372.00
20.26 KSRRB M400-23. Lime, Flyash stabilfsed Soil Sub-base. Construction
of sub-base using lime-flyash admixture with granular soil, free from
organic matter/deleterious material or clayey silts and low plasticity clays
having PI between 5 & 20 and liquid limit less than 25 and commercial
dry lime slaked at site or pre-slaked with CaO content not less than 50%,
flyash to conform to gradation as per Clause 43 of IRC: 88-1984, lime
+ flyash content ranging between 10 to 30%, the minimum un-confined
compressive strength and CBR value after 28 days curing and 4 days
soaking to be 7.5 kg/sqcm and 25% respectively, all as specified in
IRC:88-1984 complete as per specifications.
NOTE : KSRRB-400·2,4
Note 1. This analysis provides for median and island with earthen top. In
case the surface is required to be turfed or planted with shrubs,
the same is required to be provided separately.
Note 2. KSRRB M400-20. Construction of Shoulders
A. Earthen Shoulders. The rate as applicable for sub-grade
construction may be adopted.
B. Hard Shoulders. Rate as applicable for sub-base and or base
may be adopted as per approved design.
C. Paved Shoulders. The rate may be adopted as applicable
for different layers of pavement depending upon approved
design of paved shoulders.
Note 3. Cost of flyash has not been considered as same will be available
free of cost. Only carriage of flyash has been provided.
Note 4. Lime + Flyash has been taken as 20% of total mass and ratio of
lime and flyash as 1:4 for estimating purposes. Total quantities
will be as per approved design.
Note 5. Ground granulated blast furnace slog/slag sand may be used for
item No. 20.1, 20.2, 20.3, 20.4, 20.5, 20.6, instead of river sand, grit
and 6mm below aggregate or in combinations.
159
BASE AND SURFACE COURSES
(BITUMINOUS)
160
Sl. No. Description Unit Rate
Rs. Ps.
21.1 KSRRB 500-1. Cleaning the existing WBM road surface including Sqm 13.00
removing of binding materials and other foreign matter with wire brushes
and small picks, sweeping with brooms or soft brushes and finally dusting
with old gunny bags and I or compressed air, to receive bituminous
treatment including cost of all materials, labour, HOM of machineries
complete as per specifications.
MORTH specification clause 501
21.2 KSRRB 500-2. Cleaning the existing black topped surface with brooms, Sqm 3.00
soft brushes and finally dusting with old gunny bags and I or compressed
air to receive bituminous treatment including cost of all materials, labour,
HOM of machineries complete as per specifications.
MORTH specification clause 501
21.3 KSRRB 500-3. Scarifying existing stone metal layer upto 75mm thick Sqm 87.00
along with their bituminous surface, picking up scarified materials and
stacking of old serviceable materials with lead of 100m. sequential spreading
of the salvaged aggregates with fresh aggregates on prepared base and
consolidating as per water bound macadam specifications including cost of
all labour, HOM of machineries complete as per specifications.
MORTH specification clause 501
21.5 KSRRB 500-4 Providing and applying primer coat for surfaces of Sqm 56.00
medium porosity like cement stabilized soil base@ 1.1 Okglsqmt over
prepared surface with S.S bitumen emulsion using bitumen tanker fitted
with spray set (excluding cleaning of road surface) including cost of all
material, labour, HOM of machineries complete as per specifications.
MORTH Chapter 5
21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen Sqm 26.00
emulsion on prepared surface of granular base such as WMM including
cleaning of road surface and spraying primer at the rate of 0.60 kg I
sqm using mechanical means complete as per specifications.
MORTH Specification No. 502
21.7 KSRRB 500-7. Providing and applying tack coat using 80/100 grade Sqm 11.00
bitumen(VG1 0) on the prepared black topped surfaces at 2.5 kg per 10
sqm, heating bitumen in boiler fitted with spray set (excluding cleaning of
road surface) including cost of all materials, labour, HOM of machineries
complete as per specifications.
MORTH Chapter 5
21.9 KSRRB 500-9. Providing and applying tack coat using 80/100 grade Sqm 18.00
bitumen(VG10) on granular base such as WBM surfaces hot bitumen
primed at 4 kg per 10 sqm, heating bitumen in boiler fitted with spray
set (excluding cleaning of road surface) including cost of all materials,
labour, HOM of machineries complete as per specifications.
MORTH Chapter 5
161
Sl. No. Description Unit Rate
Rs. Ps.
21.10 KSRRB M500-1 0. Providing and applying tack coat using 801100 grade
bitumen(VG1 0) in boiler fitted with spray set distributor at the rate of
0.20 kg per sqm on the existing prepared bituminous surface cleaned
with mchancial broom . complete as per specifications.
MORTH Specification No. 503
21 .10.2 -do- using Bitumen 801100 (VG-10) on primed surfaces Sqm 9.00
21 .11 KSRRB 500-11. Providing and laying bituminous macadam on
prepared surface with crushed coarse aggregates as per design mix
formula for base I binding course including loading of aggregates with
F.E. loader, hot mixing of stone aggregates and bitumen in hot mix
plant, transporting the mixed material in tipper to paver and laying mixed
materials with paver finisher to the required level and grade, rolling by
power roller to achieve the desired density, but excluding cost of primer
I tack coat including lead , lift and cost of all materials, labour, HOM of
machineries complete as per specifications.
MORTH Chapter 5
21.11 .1 - do - using 1001120 TPH capacity H.M.P. with sensor paver Gr-1 cum 5,033.00
(80 mm to 100mm) with 3.3% VG-30 Bitumen
21 .11.2 - do - using 1001120 TPH capacity H.M .P. with sensor paver Gr-11 cum 5,409.00
(50 mm to 75 mm) with 3.4% VG-30 Bitumen
21 .11.3 - do - using 40160 TPH capacity H.M .P. with sensor paver Gr-1 cum 4,888.00
(80 mm to 100 mm) with 3.3% VG-30 Bitumen
21.11.4 - do - using 40160 TPH capacity H.M.P. with sensor paver Gr-11 cum 4,992.00
(50 mm to 75 mm) with 3.4% VG-30 Bitumen
21.11 .5 - do - using 40160 TPH capacity H.M .P. with Mechanical paver Gr-1 cum 4,837.00
(80 mm to 100 mm) with 3.3% VG-30 Bitumen
21 .11.6 - do - using 40160 TPH capacity H.M.P. with Mechanical paver Gr-11 cum 4,941.00
(50 mm to 75 mm) with 3.4% VG-30 Bitumen
21 .12 KSRRB 500-12. Providing, laying and consolidating of crushed Sqm 312.00
stone aggregates on prepared surface as per built up spray grout
specifications 75mm thick, as base course compacted in two layers
composite construction of crushed stone aggregates with application
of bitumen binder after each layer and lay aggregate on the top of
second layer and rolling with power roller 8 to 10 tonne but excluding
cost of primer I tack coat including cost of all materials, labour, HOM of
machineries complete as per specifications.MORTH clause No. 506
162
Sl. No. Description Unit Rate
Rs. Ps.
21 .17.1 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 5,691.00
(80 mm to 100mm) with 4% VG-30 Bitumen
21 .17.2 -do -using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 6,276.00
(50 mm to 75 mm) with 4.5 % VG-30 Bitumen
21.17.3 - do - using 40/60 TPH capacity H.M .P. with sensor paver Gr-1 cum 5,539.00
(80 mm to 100 mm) with 4% VG-30 Bitumen
21 .17.4 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-11 cum 6,124.00
(50 mm to 75 mm) with 4.5 % VG-30 Bitumen
21.17.5 - do - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-1 cum 5,483.00
(80 mm to 100 mm) with 4% VG-30 Bitumen
21.17.6 - do - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-11 cum 6,071.00
(50 mm to 75 mm) with 4.5 % VG-30 Bitumen
21 .20 KSRRB M500-18. Providing and laying semi dense bituminous
concrete using crushed aggregates of specified grading, premixed
with bituminous binder and filler, transporting the hot mix to work site,
laying with a paver finisher to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve
the desired compaction as per MORTH specification clause No. 508
complete in all respects complete as per specifications.
21.20.1 -do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 6,066.00
(35 mm to 40 mm) with 4.5 % VG-30 Bitumen
21.20.2 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 6,401.00
(25 mm to 30 mm) with 5% VG-30 Bitumen
21 .20.3 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-1 cum 5,916.00
(35 mm to 40mm) with 4.5 % VG-30 Bitumen
21.20.4 - do - using40/60 TPH capacity H.M .P. with sensor paver Gr-11 cum 6,280.00
(25 mm to 30 mm) with 5% VG-30 Bitumen
21.20.5 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-1 cum 5,860.00
(35 mm to 40 mm) with 4.5% VG-30 Bitumen
21 .20.6 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 cum 6,227.00
(25 mm to 30 mm) with 5 % VG-30 Bitumen
21.20.7 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 5,935.00
(35 mm to 40 mm) with 4.5% VG-10 Bitumen
21.20.8 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 6,286.00
(25 mm to 30 mm) with 5% VG-10 Bitumen
21 .20.9 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-1 cum 5,782.00
(35 mm to 40mm) with 4.5% VG-10 Bitumen
21.20.10- do- using40/60 TPH capacity H.M.P. with sensor paver Gr-11 cum 6,134.00
(25 mm to 30 mm) with 5% VG-10 Bitumen
21.20.11 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-1 cum 5,956.00
(35 mm to 40 mm) with 4.5% VG-10 Bitumen
163
Sl. No. Description Unit Rate
Rs. Ps.
21.20.12 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 cum 6,081.00
(25 mm to 30 mm) with 5% VG-10 Bitumen
21 .21 KSRRB M500-18. Providing and laying semi dense bituminous
concrete using crushed aggregates of specified grading, premixed
with bituminous binder and filler, transporting the hot mix to work site,
laying with a paver finisher to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve
the desired compaction as per MORTH specification clause No. 508
complete in all respects complete as per specifications.
21.21 .1 -do- using 100-120 TPH capacity H.M.P. with sensor paver grading I cum 7,392.00
(35-40mm) with 4.5% CRMB-55 grade
21 .21 .2 - do- using 100-120 TPH capacity H.M.P. with sensor paver grading II cum 7,906.00
(25-30mm) with 5% CRMB-55 grade
21.21 .3 -do- using 40-60 TPH ·capacity H.M.P. with sensor paver grading I cum 7,242.00
(35-40mm) with 4.5% CRMB-55 grade
21 .21.4 - dO - using 40-60 TPH capacity H.M.P. with sensor paver grading II cum 7,754.00
(25-30mm) with 5% CRMB-55 grade
21 .21.5 -do- using 40-60 TPH capacity H.M.P. with mechanical paver grading I cum 7,188.00
(35 -40mm) with 4.5% CRMB-55 grade
21 .21 .6 - do- using 40-60 TPH capacity H.M.P. with mechanical paver grading II cum 7,701.00
(25-30mm) with 5% CRMB-55 grade
21 .21 .7 - do - using 100-120 TPH capacity H. M.P. with sensor paver grading I cum 10,090.00
(35-40mm) with 4.5% NRMB 70 I PMB 70 grade
21.21 .8 -do - using 100-120 TPH capacity H.M.P. with sensor paver grading II cum 10,904.00
(25-30mm) with 5% NRMB 70/ PMB 70 grade
21.21.9 - do - using 40-60 TPH capacity H.M.P. with sensor paver grading I cum 9,938.00
(35-40mm) with 4.5% NRMB 70/ PMB 70 grade
21.21.10 -do - using 40-60 TPH capacity H.M.P. with sensor paver grading II cum 10,751.00
(25-30mm) with 5% NRMB 70/ PMB 70 grade
21.21.11 - do - using 40-60 TPH capacity H.M.P. with mechanical paver grading I cum 9,884.00
(35-40mm) with 4.5% NRMB 70/ PMB 70 grade
21.21.12 -do- using 40-60 TPH capacity H.M.P. with mechanical paver grading II cum 10,698.00
(25-30mm) with 5% NRMB 70/ PMB 70 grade
21.22 KSRRB M500-19. Providing and laying bituminous concrete with hot
mix plant, using crushed aggregates of specified grading , premixed
with bituminous binder and filler, transporting the hot mix to work site,
laying with a paver finisher to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve
the desired compaction as per MORTH specification clause No. 500.9
complete in all respects complete as per specifications.
MORTH Specification No. 509
164
Sl. No. Description Unit Rate
Rs. Ps.
21.22.1 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 6,847.00
(50 to 65 mm) with 5.2% VG-30 Bitumen
21.22.2 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 7,068.00
(30 mm to 45 mm) with 5.4% VG-30 Bitumen
21.22.3 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-1 cum 6,708.00
(50 mm to 65mm) with 5.2% VG-30 Bitumen
21 .22.4 - do - using40/60 TPH capacity H.M .P. with sensor paver Gr-11 cum 6,913.00
(30 mm to 45 mm) with 5.4% VG-30 Bitumen
21.22.5 -do- using 40-60 TPH capacity H.M.P. with mechanical paver grading I cum 6,653.00
(50-65mm) with 5.2% VG-30 Bitumen
21 .22.6 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 cum 6,859.00
(30 mm to 45 mm) with 5.4% VG-30 Bitumen
21 .23 KSRRB M500-19. Providing and laying bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site, laying with paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction
as per MORTH specification clause No. 509 complete in all respects
complete as per specifications.
21 .23.1 - do -using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 8,408.00
(50 to 65mm) with 5.2% CRMB 55
21.23.2 -do- using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 8,710.00
(30 mm to 45 mm) with 5.4% CRMB 55
21.23.3 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-1 cum 8,271.00
(50 mm to 65mm) with 5.2% CRMB 55
21 .23.4 - do - using40/60 TPH capacity H.M.P. with sensor paver Gr-11 cum 8,557.00
(30 mm to 45mm) with 5.4% CRMB 55
21.23.5 - do - using 40-60 TPH capacity H.M.P. with mechanical paver grading I cum 8,217.00
(50 -65mm) with 5.2% CRMB-55 grade
21.23.6 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 cum 8,502.00
(30 mm to 45 mm) with 5.4% CRMB 55
21 .23.7 - do- using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 cum 11,580.00
(50 to 65 mm) with 5.2% NRMB 70/ PMB 70
21.23.8 - do - using 100/120 TPH capacity H.M.P. with sensor paver Gr-11 cum 12,046.00
(30 mm to 45 mm) with 5.4% NRMB 70/ PMB 70
21.23.9 - do - using 40/60 TPH capacity H.M.P. with sensor paver Gr-1 cum 11,442.00
(50 mm to 65mm) with 5.2%NRMB 70/PMB 70
21.23.10- do- using40/60 TPH capacity H.M.P. with sensor paver Gr-11 cum 11,893.00
(30 mm to 45 mm) with 5.4% NRMB 70/ PMB 70
21.23.11 -do- using 40-60 TPH capacity H.M.P. with mechanical paver grading I cum 11,388.00
(50-65mm) with 5.2% NRMB 70/ PMB 70
21.23.12 - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 cum 11,838.00
(30 mm to 45 mm) with 5.4% NRMB 70/ PMB 70
165
51. No. Description Unit Rate
Rs. Ps.
21.26 KSRRB 500-22. Providing and laying single coat surface dressing or first Sqm 77.00
coat of the two surface dressing with 0.15 cum/1 0 sqm crushed stone
chippings passing 19mm & retained on 13.20mm sieve as per Table
500-21and bitumen 12 kg /10 sqm ofVG-10 (80/100) as wearing course
consisting of a layer of bituminous binder laid on the prepared surface
followed by cover of crushed stone chippings of specified size (may
be pre-coated also) and rolling with power roller 8-1 0 tonne capacity
including cost of all materials, labour, HOM of machineries complete
as per specifications . MORTHclause No.510
21 .27 KSRRB 500-23. Providing and laying second coat surface dressing with Sqm 62.00
0.10 cum/1 0 sqm crushed stone chippings passing 13.2mm & retained
on 9.50mm sieve as per Table 500-21 and bitumen 10 kg I 10 sqm of
VG-1 0 (80/1 00) as wearing course consisting of a layer of bituminous
binder laid on the prepared surface followed by cover of crushed stone
chippings of specified size (may be pre-coated also) and rolling with power
roller 8-10 tonne capacity including cost of all materials, labour, HOM of
machineries complete as per specifications. MORTHclause No.510
21.32 KSRRB 500-27. Providing and laying open graded premix carpet of Sqm 114.00
20mm thick on prepared surface in a single course as wearing course
composed of 11.2mm and 13.2mm size stone aggregates 0.027 cum/
sqm premixd with bituminous binder at 1.46kg/sqm in mini hot mix
plant 6-10 tonne capacity laying manually and rolling with power roller
8-10 tonne, excluding cost of tack coat, including cost of all materials,
labou r, HOM of machineries complete as per specificationsusing VG
10 (80/100) grade . MORTH clause No.511/Chapter 5
21.33 KSRRB 500-28. - do - using CRMB 55 grade. Sqm 135.00
MORTH clause No.511
21.36 KSRRB 500-30. Providing and laying 20 mm thick mix seal surfacing Sqm 135.00
Type A on prepared surface as wearing course with specified graded
crushed aggregates of 5.6mm and 11.2mm size 0.027 cum/sqm premixd
with bituminous binder at 2.20kg/sqm), in hotmix plant 40/60 tonne,
transporting the mixed materials in tipper and laying with machanical
paver finisher to required level and grade, rolling with power roller 8-10
tonne , excluding cost of tack coat including cost of all materials, labour,
HOM of machineries complete as per specifications .
MORTH clause No.512 using VG-30 (60/70 grade)
21.37 KSRRB 500-31.- do- using CRMB 55 grade bitumen Sqm 163.00
21.38 KSRRB 500-32. Providing and laying 20 mm thick mix seal surfacing Sqm 125.00
Type-B on prepared surface as wearing course with specified graded
crushed aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm
premixed with bituminous binder at 1.90kg/sqm, in hotmix plant
40/60 TPH, transporting the mixed materials in tipper and laying with
machan ical paver finisher to required level and grade, rolling with
power roller 8-10 tonne, excluding cost of tack coat including cost of all
materials, labour, HOM of machineries complete as per specifications .
MORTH clause No.512 using VG 30 (60/70 grade) bitumen
166
51. No. Description Unit Rate
Rs. Ps.
21.53 KSRRB M500-48 . Providing and applying slow setting bitumen Sqm 32.00
emulsion@at 0.75 kg/sqm for sealing cracks less than 3 mm wide or
incipient fretting or disintegration in an existing bituminous surfacing
complete as per specifications. MORTH Specification No. 518
21.54 KSRRB M500-48. Providing and applying low viscosity bitumen emulsion Sqm 7.00
with crushed stone grit 3mm size for sealing cracks less than 3 mm wide
or incipient fretting or disintegration in an existing bituminous surfacing
complete as per specifications.
(emulsion 2% of grit, 3.75 kg/sqm) (In case it is decided by the Engineer
to blind the fog spray)
21 .55 KSRRB M500-49.1. Providing, laying and rolling of bituminous cold cum 9,409.00
mix on prepared base consisting of a mixture of unheated mineral
aggregate and emulsified or cutback bitumen, including mixing in a
plant of suitable type and capacity, transporting, laying, compacting and
finishing to specified grades and levels complete as per specifications.
Case - I : using bitumen emulsion at 175 kg/cum & 9.5mm or 13.2mm
nominal size aggregate" MORTH Specification No. 519
21 .56 KSRRB M500-49.2. Providing, laying and rolling of bituminous cold mix cum 9,365.00
on prepared base consisting of a mixture of unheated mineral aggregate
and emulsified or cutback bitumen, including mixing in a plant of suitable
type and capacity, transporting , laying , compacting and finishing to
specified grades and levels complete as per specifications. Case - II
: using bitumen emulsion at 175 kg/cum & 19mm or 26.5mm nominal
size aggregate. MORTH Specification No. 519
21.57 KSRRB M500-49.3. Providing, laying and rolling of bituminous cold mix cum 10,960.00
on prepared base consisting of a mixture of unheated mineral aggregate
and emulsified or cutback bitumen, including mixing in a plant of suitable
type and capacity, transporting, laying, compacting and finishing to
specified grades and levels complete as per specifications. Case - Ill
: using cutback bitumen at 110 kg/cum & 9.5mm or 13.2mm nominal
size aggregate MORTH Specification No. 519
21 .58 KSRRB M500-49.4. Providng, laying and rolling of bitumens cold mix on cum 10,903.00
prepared base consisting of a mixture of unheated mineral aggregate
and emulsified or cutback bitumen, including mixing in plant of suitable
type and capacity, transporting, laying, compating and finishing to
specified grades and levels complete as per specifications. Case - IV
: Using cutback bitumen & 19mm or 26.5mm nominal size aggregate
MORTH Specification No. 519
21.64 KSRRB M500-56 .1. Providing and laying slurry seal consisting Sqm 52.00
of a mixture of fine aggregates, portland cement filler, bituminous
emulsion and water on a road surface including cleaning of surface,
mixing of slurry seal in a suitable mobile plant, laying and compacting
to provide even riding surface Complete as per specifications.
Case- I: 5mm thickness MORTH Specification No. 516
21.65 KSRRB M500-56.2. Providing and laying slurry seal consisting of a Sqm 36.00
mixture of fine aggregates, portland cement filler, bituminous emulsion
168
51. No. Description Unit Rate
Rs. Ps.
21.72 KSRRB M500-58.2. Providing and laying of premix of crushed stone cum 8,471.00
aggregates of 13.20mm down size and emulsion binder at 153 kg/cum
mixed in a batch type cold mixing plant, laid over prepared surface,
by paver finisher, rolled with a pneumatic tyred roller initially and finished
with a smooth steel wheel roller, all as per clause 500.19.3 complete as per
specifications. Case -II: 40 mm thickness MORTH Specification No. 519.3
21.73 KSRRB M500-58 .3. Providing and laying of premix of crushed stone cum 9,409.00
aggregates of 6.00mm down size and emulsion binder at 186 kg/cum
mixed in a batch type cold mixing plant, laid over prepared surface, by
paver finisher, rolled with a pneumatic tyred roller initially and finished
with a smooth steel wheel roller, all as per clause 500.19.3 complete as per
specifications. Case -Ill: 25 mm thickness. MORTH Specification No. 519.3
21 .74 KSRRB M500-47. Recycling pavement by cold milling of existing
bituminous layers, planing the surface after cold milling, reclaiming
excavated material to the extent of 30 per cent of the required quantity,
hauling and stock piling the reclaimed material near the central recycling
plant after carrying out necessary checks and evaluation, adding fresh
material including rejuvenators as required , mixing in a 40/60 TPH hot
mix plant, transporting to site and laying with mechanical paver and
compacting to the required grade, level and thickness including cost of
all materials and labour etc., complete as specified in MORTH clause 517
MORTH Specification No. 517
21 .74.1 - do- using milling machine for DBM grade II (50mm to 75mm thick) using cum 4,694.00
bitumen binder VG-30 (60/70 grade} to achieve 4.50% bitumen content.
21 .74.2 - do - Scarifying using roller attached scarifier- for DBM grade II (50mm cum 4,708.00
to 75mm thick) using bitumen binder VG-30 (60/70 grade) to achieve
4.50% bitumen content.
21 .74.3 -do- using milling machine for BM grade II (50mm to 75mm thick) using cum 3,576.00
bitumen binder VG-30 (60/70 grade) to achieve 3.30% bitumen content
21.74.4 -do- Scarifying using roller attached scarifier- for BM grade II (50mm cum 3,589.00
to 75mm thick) using bitumen binder VG-30 (60/70 grade) to achieve
3.30% bitumen content.
21.75 Providing and laying 20 mm thick mix seal surfacing Type A on Sqm 131.00
prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with
modified bituminous binder at 2.20 kg/sqm consisting of 2.024 kg ofVG- 10
bitumen (80/100 grade) and Plastomeric Thermoplastics (Waste Plastic
Additive)@ 0.176 kg, in hotmix plant 40/60 TPH , transporting the mixed
materials in tipper and laying with machanical paver finisher to required
level and grade, rolling with power roller 8-1 0 tonne, excluding cost of tack
coat, including cost of all materials, labour, HOM of machineries complete
as per specifications. MORTH clause No.512
21.76 Providing and laying 20 mm thick mix seal surfacing Type B on Sqm 122.00
prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixd with
modified bituminous binder at 1.90 kg/sqm consisting of 1.748 kg of
VG- 10 bitumen (80/1 00 grade) and Plastomeric Thermoplastics (Waste
Plastic Additive)@ 0.152 kg, in hotmix plant 40/60 TPH, transporting
the mixed materials in tipper and laying with machanical paver finisher
170
51. No. Description Unit Rate
Rs. Ps.
to required level and grade, rolling with power roller8-10 tonne, excluding
cost of tack coat, including cost of all materials, labour, HOM of machineries
complete as per specifications. MORTH clause No.512
21.77 Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher
to the required grade, level and alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achieve the desired compaction as per
MORTH specification clause No. 508 complete in all respects complete
as per specifications.
21 .77.1 -do- using 100-120 TPH capacity HMP with sensor paver grading I cum 5,892.00
(35-40mm) with 4.5% of modified bitumen binder consisting of 4.14% of
VG-1 0 bitumen (80/1 00 grade) and 0.36% of plastomeric thermoplastics
(waste plastic additive)
21 .77.2 - do- using 100-120 TPH capacity HMP with sensor paver grading II cum 6,238.00
(25-30mm) with 5% of modified bitumen binder consisting of 4.60% of
VG-1 0 bitumen (80/1 00 grade) and 0.40% of plastomeric thermoplastics
(waste plastic additive)
21 .77.3 - do - using 40-60 TPH capacity HMP with sensor paver grading I cum 5,739.00
(35-40mm) with 4.5% of modified bitumen binder consisting of 4.14% of
VG-10 bitumen (80/1 00 grade) and 0.36% of plastomeric thermoplastics
(waste plastic additive)
21 .77.4 - do - using 40-60 TPH capacity HMP with sensor paver grading II cum 6,086.00
(25-30mm) with 5% of modified bitumen binder consisting of 4.60% of
VG-1 0 bitumen (80/1 00 grade) and 0.40% of plastomeric thermoplastics
(waste plastic additive)
21.77.5 -do - using 40-60 TPH capacity HMP with mechanical paver grading I cum 5,686.00
(35-40mm) with 4.5% of modified bitumen binder consisting of4.14% of
VG-10 bitumen (80/1 00 grade) and 0.36% of plastomeric thermoplastics
(waste plastic additive)
21 .77.6 -do- using 40-60 TPH capacity HMP with mechanical paver grading I cum 6,033.00
(25-30mm) with 5% of modified bitumen binder consisting of 4.60% of
VG-1 0 bitumen (80/1 00 grade) and 0.40% of plastomeric thermoplastics
(waste plastic additive)
21.77.7 - do- using 100-120 TPH capacity HMP with sensor paver grading I cum 6,014.00
(35-40mm) with 4.5% of modified bitumen binder consisting of4.14% of
VG-30 bitumen (60/70 grade) and 0.36% of plastomeric thermoplastics
(waste plastic additive)
21.77.8 -do- using 100-120 TPH capacity HMP with sensor paver grading II cum 6,375.00
(25-30mm) with 5% of modified bitumen binder consisting of 4.60% of
VG-30 bitumen (60/70 grade) and 0.40% of plastomeric thermoplastics
(waste plastic additive)
21 .77.9 - do - using 40-60 TPH capacity HMP with sensor paver grading I cum 5,862.00
(35-40mm) with 4.5% of modified bitumen binder consisting of 4.14% of
VG-30 bitumen (60/70 grade) and 0.36% of plastomeric thermoplastics
(waste plastic additive)
21.77.10- do- using 40-60 TPH capacity HMP with sensor paver grading II cum 6,222.00
(25-30mm) with 5% of modified bitumen binder consisting of 4.60% of
171
Sl. No. Description Unit Rate
Rs. Ps.
21 .78.9 - do - using 40-60 TPH capacity HMP with sensor paver grading I cum 6,299.00
(50-65mm) with 5.2% of modified bitumin us binder consisting of 4. 78% of
VG-30 bitumen (60/70 grade) and 0.42% of plastomeric thermoplastics
(waste plastic)
21.78.10- do - using 40-60 TPH capacity HMP with sensor paver grading II cum 6,863.00
(30-45mm) with 5.4% of modified bituminus binder consisting of 4.97%
of VG-30 bitumen (60/70 grade) and 0.43% of plastomeric thermoplastics
(waste plastic)
21 .78.11- do- using 40-60 TPH capacity HMP with mechanical sensor paver cum 6,477.00
grading I (50-65mm) with 5.2% of modified bituminus binder consisting
of 4.78% of VG-30 bitumen (60/70 grade) and 0.42% of plastomeric
thermoplastics (waste plastic)
21.78.12- do- using 40-60 TPH capacity HMP with mechanical paver grading II cum 7,041.00
(30-45mm) with 5.4% of modified bitumin us binder consisting of 4.97%
ofVG-30 bitumen (60/70 grade) and 0.43% of plastomeric thermoplastics
(waste plastic)
21.79 Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision:
Providing and laying stone Matrix Asphalt (SMA) using crushed
aggregates of specified grading (as per section 515 of MORTH 5th
Revision): premixed with modified bituminous binder containing
Pelletized Cellous fibre at 0.3% (on loose fibre basis) on the weight of
total mix in the batch and filler(Hydrated lime dust @ 2% of weight of
aggregates, transporting the hot mix to work site, Laying with a paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, Vibratory and tandem rollers to achieve the desired compaction
as per MORTH specifications clause no. 515 complete in all respects
complete as per specification
Note: Pnumatic tyre roller must not be used
21 .79.1 -do- using 40/60 TPH capacity H.M.P. with mechanical paver cum 8,621.00
SMA- 45mm to 75mm, compacted thickness with 5.8% VG-30 bitumen
as per MORTH 5 revision clause 515.
21.79.2 - do- using 40/60 TPH capacity H.M .P. with mechanical paver
SMA- 40mm to 50mm, compacted thickness with 5.8% VG-30 bitumen cum 8,619.00
as per MORTH 5 revision clause 515.
173
Sl. No. Description Unit Rate
Rs. Ps.
174
CONCRETE PAVEMENT
175
Sl. No. Description Unit Rate
Rs. Ps.
22.3 KSRRB M600-3. Construction of Rolled Cement Concrete mix 1:4:8 cum 3,898.00
OPC cement @180kgs, with 25mm and down size graded granite
metal coarse aggregate at 0.85cum and fine aggregates @0.57cum
base course with coarse and fine aggregate conforming to IS:383,
aggregate cement ratio 12:1 and minimum cement content of 180kg/
cum, aggregate gradation to be as per Table 600-4 after blending,
mixing in batching plant at optimum moisture content, transporting to
site, laying with a paver with electronic sensor, compacting with 8-10
tonnes smooth wheeled vibratory roller to achieve, the designed flexural
strength, finishing and curing complete as per specifications
22.6.1 M30 (at 360Kg per cum coarse aggregate @ 0.69cum and fine cum 5,866.00
aggregate @ 0.46cum)
22.6.2 M20 (at 300Kg per cum coarse aggregate @ 0.69cum and fine cum 5,197.00
aggregate @ 0.43cum)
22.7 Vaccum de-watering with vaccum pump and suction mat and Sqm 90.00
compaction with skin floater clubbed with floating disc including cost of
177
51. No. Description Unit Rate
Rs. Ps.
178
GEOSYNTHETIC AND
REINFORCED EARTH
I
'
179
51. No. Description Unit Rate
Rs. Ps.
23.1 KSRRB M700-1 . Construction of sub surface drain 200 mm dia m 565.00
using geotextilestreated with carbon black with physical properties as
given in clause 700.2.2.3 formed in to a stable network and a planar
geocomposites structure, joints wrapped with geotextiles to prevent
ingress of soil, all as per clause 700.2 and approved drawings including
excavation and backfilling complete as per specifications.MORTH
Specification No. 702
23.2 KSRRB M700-2. Construction of a narrow filter sub- surface drain m 669.00
Narrow Filter Sub-Surface Drain consisting of porous or perforated
pipe laid in narrow trench surrounded by a geotextiles filter fabric, with
a minimum of 450 mm overlap of fabric and installed as per clause
700.2.3 and 300.9.3.5 including excavation and backfilling complete
as per specifications.
MORTH Specification No. 702.4
23.3 KSRRB M700-3. Laying Paving Fabric Beneath a Pavement Overlay:- Sqm 69.00
Providing and laying paving fabric with physical requirements
as per Table 704-2 over a tack coat of paving grade Bitumen 80-100
penetration, laid at the rate of 1 kg per sqm over thoroughly cleaned
and repaired surface to provide a water resistant membrane and crack
retarding layer. Paving fabric to be free of wrinkling and folding and
to be laid before cooling of tack coat, brooming and rolling of surface
with pneumatic roller to maximise paving fabric contact with pavement
surface complete as per specifications. MORTH Specification No. 703
23.4 KSRRB M700-4. Laying Boulder Apron in Crates of Synthetic cum 4,186.00
Geogrids:- Providing, preparing and laying of geogrids crated apron
1 m x 5 m, 600 mm thick including excavation and backfilling with baffles
at 1 metre interval, made with geogrids having characteristics as per
clause 700.4.2, joining sides with connectors/ring staples, top corners
to be tie tensioned, placing of suitable cross interval ties in layers of 300
mm connecting opposite side with lateral braces and tied with polymer
braids to avoid bulging, constructed as per clause 700.4.3. filled with
stone with minimum size of 200 mm and specific gravity not less than
2.65, packed with stone spalls, keyed to the foundation recess in case of
sloping ground and laid over a layer of geotextiles to prevent migration
of fines, all as per clause 700.4 and laid as per clause 200.5.3.3 and
approved design complete as per specifications.MORTH Specification
No. 704
180
TRAFFIC SIGNS, MARKINGS &
OTHER ROAD APPURTENANCES
181
51. No. Description Unit Rate
Rs. Ps.
24.3 KSRRB M800-3. Direction and Place Identification Signs upto Sqm 8,104.00
0.9 sqm Size Board : Manufacturing, Supply and installation of
retro- reflective Cautionary, Mandatory & Informatory signboards
made out of cube corner micro prismatic grade sheeting confirming
to Type XI standards of IRC:67:2012 specification & fixed over 4 mm
thick Aluminum Composite Panel sheet having minimum 0.30 mm
thick aluminum skin on both sides & fixed over a support frame of
25x25x 3mm MS angle and mounted on 75 mm dia OR 75X75X6 MM
Mild steel angle of Total height 2.70 M with clear height of not less than
2.10 M from the ground level to the bottom of the Sign board & 60 em
below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and white
colour with bands of 30 em height alternatively firmly fixed to the ground
182
51. No. Description Unit Rate
Rs. Ps.
24.4 KSRRB M800-4. Direction and Place Identification Signs with size Sqm 13,902.00
morethan 0.9 sqm Size Board: Manufacturing, Supply and installation
of retro-reflective Cautionary, Mandatory & Informatory signboards
made out of cube corner micro prismatic grade sheeting confirming
to Type XI standards of IRC:67:2012 specification & fixed over 4 mm
thick Aluminum Composite Panel sheet having minimum 0 .30 mm
thick aluminum skin on both sides & fixed over a support frame of
25x25x 3mm MS angle and mounted on 75 mm dia OR 75X75X6MM
Mild steel angle of Total height 2.70 M with clear height of not less than
2.10 M from the ground level to the bottom of the Sign board & 60 em
below ground level. The sign post should be painted with one coat of red
oxide paint and two coats of synthetic enamel paint of black and white
colour with bands of 30 em height alternatively firmly fixed to the ground
by means of foundation with M20 grade cement concrete of 45 em x 45
em x 60 em including cost & conveyance of all materials, equipment,
machinery & Labour with all leads and lifts, Loading charges necessary
for satisfactory completion of the work as directed by engineer in-charge.
10 years warranty for Retro Reflective Sheeting from the original
sheeting manufacturer as per clause 6.9 in IRC 2012 & a certified copy
of three years outdoor exposure report from an independent test lab for
the product offered shall be obtained from the supplier.
24.5 KSRRB M800-5.1. Over head Signs (Truss and Vertical Support): Tonne 81,592.00
Manufacturing, Supply and installation of retro- reflective Over-Head
Gantry signboards made out of cube corner micro prismatic grade
sheeting confirming to Type XI standards of IRC:67:2012 fixed over 4mm
thick Aluminium Composite Panel sheet, excluding the cost of Type
XI retro-reflective sheeting and 4mm Thick ACP sheet with suitable
back support frame over a designed support system of aluminum
alloy or galvanised steel trestles and trusses of section type as per
structural design requirements and approved plans complete as per
specifications. Vertical and Lateral Clearance of the Gantry shall be as
per IRC 67 2012 and as per Clause 800.2.2 and 800.2 .3 and installed as
per clause 800.2.7. 10 years warranty for Retro Reflective Sheeting from
the original sheeting supplier as per clause 6.9 in IRC 2012 & a certified
copy of three years outdoor exposure report from an independent test
lab for the product offered shall be obtained from the supplier.
183
Sl. No. Description Unit Rate
Rs. Ps.
24.6 KSSRB M800-5.2 Over Head Sign Board : Supply and installation of Sqm 8,004.00
retro- reflective Over-Head Gantry sign baords made out of cube corner
micro prismatic grade sheeting confirming to Type XI standards of
IRC:67:2012 specification & fixed over 4mm thick Aluminium Composite
Panel sheet having minimum 0.30 mm thick aluminum skin on both
sides excluding the cost of back support frame, vertical support
and horizontal support and foundation. 10 years original Warranty
for Retro Reflective Sheeting from the original sheeting manufacturer
as per clause 6.9 in IRC 2012 & a certified copy of three years outdoor
exposure report from an independent test lab for the product offered
shall be obtained from the manufacturer and shall be submitted by the
contractor for Technical Qualification in the tender.
24.9 KSRRBM800-9. Painting New Letter and Figures of any Shade with em 0.75
synthetic enamel paint black or any other approved colour to give an
even shade complete as per specifications. ("i) Hindi ( Matras commas
and the like not to be measured and paid for half letter shall be counted
as half)" MORTH Specification No. 803
24.10 KSRRB M800-1 0. Painting new letter and figures of any shade with em 0.50
synthetic enamel paint black or any other approved colour to give an
even shade complete as per specifications. ("ii) English and Roman -
Hyphen and the like not to be measured and paid for"
MORTH Specification No.801
24.11 KSRRB M800-11.1.Painting lines, dashes, arrows etc.,on Roads in Sqm 131.00
two coats on New Work:-Painting lines, dashes, arrows etc on roads in
two coats on new work with ready mixed road marking paint conforming
to IS: 164 on bituminous surface, including cleaning the surface of all
dirt, dust and other foreign matter, demarcation at site and traffic control
complete as per specifications. i) Over 10 em in width.
MORTH Specification No. 803
24.12 KSRRB M800-11.2. Painting lines, dashes, arrows etc.,on Roads in Sqm 118.00
two coats on New Work:-Painting lines, dashes, arrows etc on roads in
two coats on new work with ready mixed road marking paint conforming
to IS: 164 on bituminous surface, including cleaning the surface of all
184
Sl. No. Description Unit Rate
Rs. Ps.
dirt, dust and other foreign matter, demarcation at site and traffic control
complete as per specifications.ii) Upto 10 em in width
MORTH Specification No. 803
24.13 KSRRB M800-12.1.Painting lines, dashes, arrows etc.,on Roads in Sqm 99.00
two coats on Old Work:-Painting lines, dashes, arrows etc on roads in
two coats on old work with ready mixed road marking paint conforming
to IS: 164 on bituminous surface, including cleaning the surface of all
dirt, dust and other foreign matter, demarcation at site and traffic control
complete as per specifications. i) Over 10 em in width
MORTH Specification No. 803
24.14 KSRRB M800-12.2 -do- ii) Upto 10 em in width Sqm 93.00
MORTH Specification No. 803
24 .15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Sqm 512.00
Compound with Reflectrising Glass Beads on Bituminous Surface:
Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads at 250 gms per sqm area,
thickness of 2.5 mm is exclusive of surface applied glass beads as per
IRC:35. The finished surface to be level, uniform and free from streaks
and holes complete as per specifications. MORTH Specification No. 803
core of the delineator shall extend 300mm beyond the shell length from
bottom for installing in the ground. The extended portion of the metallic
core having suitable slots to be fixed in M20 grade Cement Concrete
of size 300X300X400 MM with suitable anchoring rods for enhancing
the grip,as per IRC:79 Specifications.
24.20 KSRRB M800-16. Boundry Pillar:- Reinforced cement concrete M-15 Nos 422.00
grade boundry pillars of standard design as per IRC:25-1967, fixed in
position including finishing and lettering but excluding painting complete
as per specifications. MORTH Specification No. 806
KSRRB MBOO- Fencing/ Railing
24.21 KSRRB M800-17. G.l. Barbed Wire Fencing 1.2 Metre High-Providing m 197.00
and fixing 1.2 metres high Gl barbed wire fencing with 1.8 m angle iron
posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center
founded in M15 grade cement concrete, 0.6 metre below ground level,
every 15th post, last but one end post and corner post shall be strutted
on both sides and end post on one side only and provided with 9
horizontal lines and 2 diagonals interwoven with horizontal wires, fixed
with Gl staples, turn buckles etc complete as per clause 800.7 as per
specifications. MORTH Specification No. 807
24.22 KSRRB M800-18. G.l. Barbed Wire Fencing 1.8 Metre High:- Providing m 339.00
and fixing 1.8 metres high Gl barbed wire fencing with 2.4 m angle iron
posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center
founded in M-15 grade cement concrete, 0.6 metre below ground
level , every 15th post, last but one end post and corner post shall be
strutted on both sides and end post on one side only and provided with
12 horizontal lines and 2 diagonals interwoven with horizontal wires,
fixed with Gl staples, turn buckles etc complete as per clause 800.7 as
per specifications. (Excluding the cost of excavation for foundation and
foundation concrete) MORTH Specification No. 807
24.23 KSRRB M800-19. Fencing with Welded Steel Wire Fabric 75mm x m 500.00
50mm:-Providing 1.20 metre high fencing with angle iron posts 50 mm
x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded
in M15 grade cement concrete, corner, end and every 10th post to be
strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh
or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm
and bolts etc. complete in all respects as per specifications.
MORTH Specification No.Suggestive
24.24 KSRRB M800-20.Tubular Steel Railing on Medium Weight Steel m 1,434.00
Channel (ISMC Series) 100 mm x 50mm:-Providing, fixing and erecting
50 mm dia steel pipe railing in 3 rows duly painted on medium weight
steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above
ground, 2 m centre to centre, complete as per approved drawings as
per specifications. MORTH Specification No. 808
24.25 KSRRB M800-21.Tubular Steel Railing on Precast RCC Posts, 1.2m m 1,220.00
High Above Ground Levei:-Providing, fencing and erecting 50 mm dia
painted steel pipe railing in 3 rows on precast M-20 Grade RCC vertical
posts1 .8 metres high (1.2 m above GL) with 3 holes 50 mm dia for pipe, fixed
2 metres centre to, complete as per approved drawing as per specifications.
MORTH Specification No. 808
186
51. No. Description Unit Rate
Rs. Ps.
187
Sl. No. Description Unit Rate
Rs. Ps.
188
Sl. No. Description Unit Rate
Rs. Ps.
24.36 KSRRB M800-29.3. -do- Case-lli :Triple row for three utility services. m 4,999.00
KSRRB M800-Gantry mounted variable message sign board
24.37 KSRRB M800-33.1. Providing and erecting gantry mounted variable Tonne 78,726.00
message sign board electronically operated capable of flashing the
desired message over a designed support system of aluminium alloy or
galvanised steel, erected as per approved design and drawings and with
lateral clearance as per clause 800.2.3 complete as perspecifications.
i) Gantry Support System
KSRRB M800-34Traffic input attenuators at abutments and piers
24.38 KSRRB M800-34.1 . Providing and installation of traffic attenuators at Sqm 1,473.00
abutment/pier of flyovers bridges using scrap tyres of size 100 x 20
retrieved from trucks laid in 2 rows and 4 tiers, one above the other
and tied with 20 mm wire rope as per approved design and drawings
complete as per specifications
24.39 KSRRB M800-34.2. Providing and installation of traffic impact attenuator Sqm 1,303.00
at abutment/pier of flyovers bridges using plastic/steel barrels 0.60 m
dia and 1.0 m in height, filled with sand in three rows and tied with20
mm steel wire rope as per approved design and drawings complete as
per specifications. B. Using Plastic I steel Barrel, Filled with Sand
24.40 KSRRB M800-34.3. Providing and installing a patentend HI - ORO Sqm 857.00
cell system as a traffic impact attenuators, using plastic tubes 50 em
dia, 1.2 m in height, 25 mm opening at the top, placed in three rows,
filled with water and tied with a 20 mm steel wire rope complete as
per specifications. (In this patented HI - ORO cell system, water gets
discharged from plastic tubes on impact over a pre-determined time,
th us absorbing the energy) C. With HI- ORO Cell Sandwich (Patented)
189
51. No. Description Unit Rate
Rs. Ps.
KSRRB M800-Fiagman
24.49 KSRRB MS00-46. Positioning of a smart flagman with a yellow vest and Each 360.00
a yellow cap and a red flag 600 x 600 mm securely fastened to a staff
1 m in length for guiding the traffic complete as per specifications
24.50 Supplying and fixing in position new guard stones of granite/trap/sand Each 183.00
stone/shahabad roughly dressed, of size 700mm x 200mm x 200mm
including excavation, painting with white and black paint 15cm wide
strip alternatively etc., complete.
24.51 Removing and verifying guard stones/KM stones/ boundary stones, Each 32.00
in a complete manner embedded in earth excluding painting.
24.52 Providing and fixing RCC precast guard stones of size 0.23mx0.23mx1.5m Each 2,239.00
casted in cc 1:1.5:3 with 20mm down size aggregates using 1Omm dia
vertical 4TMT steel rods and 8 mm dia stirrups at 20 em c/c fixed 0.90
m above Ground level using steel moulding, Curing, transportation to
work spot including excavation in hard soil fixing in plain cement concrete
1:2:4 using 20mm downsize aggregate including aligning to plumb and
line providing enamel painting to exposed faces in alternate black and
white strips and painting with reflective paint on top of guard stone with
a width of 10 em including cost of all materials, labour, hire charge of
machineries complete. (As per drawing)
24.53 Supply & installation of Aluminum-backed flexible prismatic sheeting No. 860.00
made of Yellow coloured flexible prismatic sheeting with non-metallic
prismatic lens, formed in a transparent, synthetic resin, as retroreflective
elements mounted on a Aluminum (AI} foil with a pre-coated pressure
sensitive adhesive and easily removable liner,containing screen printed
arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around
objects,capable of exhibiting very high conformability and non-returning
dead-fold characteristics required for application on rough and uneven
surfaces. Ten years warranty for the reflectivity from the original
manufacturer shall be submitted by the contractor.
24.54 Supply & Installation of Flexible Median Markers made of combination No. 335.00
of tough, high impact resistant molded thermoplastic body with U
shape structure & rebound property & exposed body structure should
be cornered rounded for better aesthetics. The flexible median marker
shall have U shaped florescent yellow color retro-reflective sheeting
with minimum exposed reflective area 75 cm2. The reflective sheeting
should confirm to Type XI Florescent Yellow sheeting as per IRC 67
2012 .The third party test report for reflective sheeting shall be submitted
along with product information. The product design has to with stand all
natural impacts and should not get damaged if any pedestrian stamp
on top of it intentionally or unintentionally. The product should bend up
to 90 degree on both sides (becoming completely horizontal), it should
be able to take minimum 500 stamping without any significant damage.
The Flexible Median Marker shall be fixed by a combination of epoxy
adhesive and grouting/Drilling as recommended by manufacturer.Two
years warranty for the reflectivity from the original manufacturer shall
be submitted by the contractor.
191
Sl. No. Description Unit Rate
Rs. Ps.
24.55 Supply & Installation of Solar Raised Pavement Markers made of No. 2,957.00
polycarbonate molded body with circular shape, solar powered, LED
self illumination in active mode, 360 degree illumination and reflective
panels with micro prismatic lens in passive mode. The marker shall
support a load of 20000 kg tested in accordance to IRC 37 and shall
be resistant to dust and water ingress according to IP 65 (Ingress
Protection 65 is a test which is conducted to check if solar road stud
is protected from total dust Ingress and low pressure water jets from
any direction) standards and should withstand temperatures in the
range of 0 C to 70 C. Color of lighting could be provided in red or
yellow (amber) as per requirement and typical frequency of blinking is
1 Hz. There should be current losses of less than 20 micro-amperes
at 2.4 V in sleep-charging mode to enhance the life of the marker and
a full charge should provide for a minimum autonomy of 50 hours.
The height, width and length of the marker shall not be less than
10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker
shall not be less than 100 mm respectively. The weight of the marker
shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the
road for the shanks to go inside, without nails and using epoxy resin
based adhesive as per manufacturer's recommendation and complete
as directed by the engineer. Two years warranty for the reflectivity from
the original manufacturer shall be submitted by the contractor.
24.56 Supply & Installation of Rigid Median Marker made of tough, high No. 428.00
impact resistant, injection-molded, thermoplastic body with an isosceles
trapezoidal structure of length, width and height not less than 15cm,
1Ocm and 1Ocm respectively and thickness not less than 1.8mm, the
body structure shall be rounded suitably. The plastic used for molding
the Median Marker shall conform to ASTM 0256. The logo of the
manufacturer shall be embossed on either side of the body in the
injection molding process. The Median Marker shall have rectangular-
shaped, fluorescent yellow color retro-reflective sheeting of size not less
than 8.5cm*8.5cm and with fully reflective micro prismatic cube corners
as its retro-reflective elements as per IRC 67 2012. The retro-reflective
sheeting shall be a one or both sides of the Median Marker and shall be
edge protected with no exposed edges which will prevent edge lifting,
vandalism, sheeting damage, etc. The Median Marker shall be fixed by
a combination of epoxy adhesive and grouting. Two years warranty for
the reflectivity from the original manufacturer shall be submitted by the
contractor.
24.57 Road Marking with hot Applied Thermoplastic compound with Sqm 647.00
Reflectrising Glass Beads on Concrete Surface: Providing
and laying of hot Applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads at 250 gms and 2Ltr of Primer
per sqm area, thickness of 2.5 mm is exclusive of surface, applied
glass beads as per IRC:35. The finished surface to be level, uniform
and free from Streaks and holes complete as per specifications.
MORTH Specification No. 803.
192
NOTE :
1. Lettering and arrow marks on sign board to be provided separately as per g. Suppl ied and Installed Signboards shall be tested by the
actual requirement. Rates for these items have been analysed separately. Retro-Reflective sheeting Manufacturer using a Reflectometer
2. Rate for excavation, cement concrete M-15 and painting may be on a random basis at the end of 1st year, 3rd year, 5th year
taken from respective chapters and 7th Year for Retained Reflectivity - Ra va lues of Type
XI Retro Reflective sheeting as per table 6.9 of IRC 67 2012
3. Excavation and backfilling are incidental to work and not to be
Specifications as per the table given below.
measured separately.
4. In the case of median crash barrier, 'W' metal beam or their beam
Table 1: Acceptable min. coefficient of retro reflection for wide angle
section should be provided on both sides of the vertical posts fixed
prismatic sheeting
in the median. Extra provision for metal beam railing and spacer is required
to be made when fixed in the median depending on approved design. c:: c
Q)
0
c
- Q)
~ C' C'
5. Plantation of shrubs and plants of approved species in the median ~ Q)
(,) Q) ~(!) Q)
(,)
Q)
(,) Q)
~ ~Cl g~ c c
"
Cl U) Cl
apart from cutting off glare from vehicle coming from opposite direction, 2 c
" ~ 0" ~.Q ~ c
Q)
U) .2 'C Q) U) U)"
c c c :E ~ ~ ::> E! o = o - 0 ~
~
.0 Q)
these plants provide a pleasant environment and are eco-friendly. 0<>:: 0 (!) oc iXi m u:: ~ u:~ u:: o
0.1°8
W<{
-4. "
830 620 290 83 125 31 25 660 500 250
Suggested Qualifying Conditions to be included in road safety tender: 0.1°8 +3o· 325 245 115 33 50 15 10 260 200 100
Retro-Reflective XI- Diamond Grade Sheeting 0.2· -4· 580 435 200 58 87 26 17 460 350 175
0.2° +30° 220 165 77 22 33 10 7 180 130 66
a. Contractor shall subrnit a current dated Authorization certificate
issued by the Retro reflective sheeting manufacturer stating that 0.5· -4· 420 315 150 42 63 19 13 340 250 125
the contractor is authorized to participate in the said tender. The o.5· +3o· 150 11 0 53 15 23 7 5 120 90 45
certificate should be in original and issued by the retroreflective 1.o· -4. 120 90 42 12 18 5 4 96 72 36
sheeting manufacturer or its subsidy in India. Certificate issued by 1.o· +30° 45 34 16 5 7 2 1 36 27 14
distributor dealer/ power of attorney holder shall be disqualified.
RAISED PAVEMENT MARKER I ROAD STUDS:
b. The Tenderer should be experienced sign maker and having necessary
infrastructure for making quality signs, they should be possessing 1. The bidder shall be an Authorized Convertor I Applicator of RPM
equipment's like HSRA, Plotter cutter, Screen printing facilities etc., or Road Studs manufacturer & Shall upload the Authorization
All Cautionary I Mandatory signboards shall be screen printed using certificate during the bid submission
Red I black 2. A certified copy of test reports of having tested the lens and
structural strength as per ASTM D 4280 for the specified tests
c. Contractor shall submit a 10 year pre-qualification warranty, in
original, issued by the retro reflective sheeting manufacturer or including the C.I.L. values as per the table 800-13 & 800-14
of clause 804 of MaRTH specification including compressive
its subsidiary in India for Technical qualification in the tender and
Actual Warranty post installation. The warranty shall be for micro Strength and its having passed these tests shall be obtained
Prismatic type retro reflective sheeting confirming to ASTM D4956-09 and the same shall be submitted along with the technical bid
type XI sheeting conforming to IRC 67 2012 and ASTM D 4956-09 3. Thf! contractor shall obtain Pre-Qualification Warranty certificate
. specification parameters, the warranty should be in original and jointly for two years in original and submit the same along with the bid.
signed by the contractor. 4. A sample of the stud with two molded shanks confirming to
d. A Certified copy of laboratory test report for Type XI Retro Reflective the specifications mentioned above shall be submitted by the
Sheeting from a reputed and independent laboratory shall be contractor.
obtained from Retro Reflective Sheeting Manufacturer and must
be submitted by the contractor for technical qualification. The Type DELINEATORS:
XI Retro reflective Sheeting should have been tested for the below
performance parameters as per ASTM D 4956-09 & ASTM E-81 0. 1. The Tenderer shall be an Authorized Convertor I Applicator of
The Report should be clearly mentioned the sheeting to have passed manufacturer & Shall upload the Authorization certificate during
all the below tests : the bid submission.
(i) Coefficient of Retro Reflection (ii) Day time color & luminance 2· The contractor shall obtain Pre-Qualification Warranty certificate
for two years in original and submit the same along with the bid.
(iii) Accelerated outdoor weathering (iv) Colourfastness
3. A test report from the manufacturer of retro-reflective sheeting
(v) Shrinkage (vi) Flexibility (vii) Liner Removal (viii) Adhesion stating that the white and red retro-reflective sheeting used in the
(ix) Impact resistance (x) Specular gloss (xi) Nighttime color Delineator shall conform to ASTM D4956 type XI specifications
and shall retain at least 80% of its initial values of coefficient of
e. A copy of 3-year outdoor exposure report for the product offered shall be
submitted. The report shall be attested by the retroreflective sheeting retro-reflection after getting subjected to accelerated outdoor
weathering for 3 years.
manufacturer, the performance reading after 3 years, must be atleast
80% of the minimum values mentioned in ASTM D 4956 type XI sheeting 4. IRC Accreditation copy for the Delineators.
performance table. The outdoor weathering shall be conducted at
2 locations with different climatic conditions, as mentioned in MEDIAN MARKER:
ASTM D 4956, i.e.-
1. Bidder should submit & upload a Letter of authorization confirming
1) Tropical Summer Rain 2) Desert that the supplier of the Median Marker is an authorized applicator
f. Indian lab (local) test report containing test report on Retro-reflectivity
I converter of the Median Marker Manufacturer.
and Colorometry shall be submitted along with the qualification 2. Sample Median Marker shall have manufacturer LOGO
documents. embossed on either side of the body during the injection molding
process
193
3. A test report from the manufacturer of retro-reflective sheeting stating that the Fluorescent Yellow retro-reflective sheeting used in the
Median Marker shall conform to ASTM 04956 type XI specifications and shall retain at least 80% of its initial values of coefficient of retro-
reflection after getting subjected to accelerated outdoor weathering for 3 years.
4. Conformance certificate from the Manufacturer of the Median Marker stating that the Polycorbonate Used for Manufacturing of Median
Markers conforms to ASTM 0 256 for Impact Strength & ASTM G155 (or) ISO 180/A for Performance under accelerated weathering for
1000hrs as in Table should be submitted by the bidder during the Bid.
5. A Pre-Qualification Warranty on field performance of the Median Marker shall be satisfactory for a period of at least 2 years, provided it is
handled, installed and maintained as per the Median Marker manufacturer's recommendations.
6. IRC Accreditation copy for the Median
194
Cautionary Signboard Mandatory Signboard Facility Information Board Chevron Signboard
SOR Reference No : 24.2.1 & 24.2.2 SOR Reference No : 24.2.3 SOR Reference No : 24.2.4 SOR Reference No : 24.2.5
STOP
900 MM Octagonal Board Aluminum Backed Flexible prismatic Sheeting
SOR Reference No : 24.2.6 SOR Reference No : 24.53
195
TYPICAL CROSS SECTION OF RCC GAURD STONE FOR TANK BUND.
I ~23 l
0.<15 -,
I llZ1 ' I
I
0.90
Pee tEo
......
CD
(j)
Cl.45
· -·
_ ..
"'F - .: . .. . , .-.I _.-'111'1• . '.. . -• :111'-·.11
- lit I I
-
. ...
•
- ·
•
IYM"\.
I 41 .
~ -.cc :MI.s r ~ . -.~ _,. ~ 'f
4l4! •-
Q
- , · : _4
'
•-.
- • .J,.
~..o
'
, •. ~
·~ · I
. r
•,_ • .
"
I . •• ,_; I ,4 · .a. 4 . • .. • ; . : -'
~
I ~·s I
CROSS SECTION
PLAN
BRIDGES
BRIDGES - PILE FOUNDATION
197
51. No. Description Unit Rate
Rs. Ps.
25.9 KSRRB M 11 00-4.4. Driven precast vertical circular R.C.C. Piles with m 2,103.00
OPC cement design mix M35 @ 390kgs, with 20mm and down size
graded granite metal coarse aggregates @0.68cum and fine aggregtes
@ 0.45cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008, excluding Reinforcement complete as per Drawing
and & Technical Specification complete as per specifications .Pile
diametre =500 mm
MORTH Specification No. 11 00 & 1700
25.12 KSRRB M1100-4.7. Driven precast vertica l R.C.C. Piles with OPC m 1,369.00
cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0 .68cum and fine aggregtes @
0.45cum , with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008, excluding Reinforcement complete as per Drawing
and & Technical Specification complete as per specifications. Size of
pile = 300 mm x 300 mm
MORTH Specification No.11 00 & 1700
25.15 KSRRB M1100-5. Driven Vertical Steel Piles as per Drawing and & m 5,757.00
Technical Specification complete as per specifications. Section of the pile
=H Section steel column 400 x 250 mm (ISHB Series)
MORTH Specification No.11 00 & 1900
25.16 KSRRB M1100-6. Driven Vertical Steel Piles as per Drawing and & m 6,497.00
Technical Specification complete as per specifications. Section of the pile
=H Section steel column 450 x 250 mm (ISHB Series)
MORTH Specification No.11 00 & 1900
25.20 KSRRB M11 00-9.1. Cement Concrete for Reinforced Concrete in cum 5,932.00
Pile Cap as per Drawing and Technical Specification complete as per
specifications. B. RCC with OPC cement design mix M25 @ 340kgs,
with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregtes@ 0.47cum, with superplastisiser @31ts
confirming to IS91 03-1999 Reaffirmed-2009.
Case-1 : Using Concrete Mixer
MORTH Specification No.1100, 1500 & 1700
25.21 KSRRB M1100-9.2. -do- B. RCC with OPC cement design mix cum 5,865.00
M25 @ 340kgs, with 20mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregtes @ 0.47cum , with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2009.
Case-11: Using Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No.11 00, 1500 & 1700
25.22 KSRRB M1100-1 0.1. Cement Concrete for Reinforced Concrete in Pile cum 6,097.00
Cap per Drawing and Technical Specification complete as per specifications.
C. RCC with OPC cement design mix M30 @ 360kgs, with 20mm and
down size graded granite metal coarse aggregates @0.69cum and
fine aggregtes @ 0.46cum, with superplastisiser @31ts confirming to
IS91 03-1999 Reaffirmed-2008.
Case-1: Using Concrete Mixer
MORTH Specification No.11 00, 1500 & 1700
25.23 KSRRB M1100-10.2. -do- C. RCC with OPC cement design mix cum 6,036.00
M30 @ 360kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008.
Case-11: Using Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No.11 00, 1500 & 1700
25.24 KSRRB M 11 00-11.1. Cement Concrete for Reinforced Concrete cum 6,341.00
in Pile Cap complete as per Drawing and Technical Specification
complete as per specifications.D. RCC with OPC cement design
mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008.
Case-1: Using Concrete Mixer
MORTH Specification No.1100, 1500 & 1700
25.25 KSRRB M1100-11.2. -do- D. RCC with OPC cement design mix cum 6,290.00
M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008.
Case-11: Using Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No.11 00, 1500 & 1700
200
Sl. No. Description Unit Rate
Rs. Ps.
201
BRIDGES -WELL FOUNDATION
202
51. No. Description Unit Rate
Rs. Ps.
26.5.1 KSRRB M 1200-3.1 i) RCC with OPC cement design mix M20 @ cum 7,173.00
320kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum , with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.2 KSRRB M1200-3.2 ii) RCC with OPC cement design mix M25 @ cum 7,439.00
340kgs, with 20mm and dowh size graded granite metal coarse
aggregates @0 .7cum and fine aggregates @ 0.47cum , with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.3 KSRRB M1200-3.3. iii) RCC with OPC cement design mix M35 cum 7,916.00
@ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregates @ 0 .45cum , with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.4 KSRRB M1200-4.1 . i) PCC design mix M15 With OPC cement cum 5,398.00
@ 240kgs, with 40mm and down size graded granite metal coarse
aggregates @0.63cum and fine aggregates @ 0.42cum
26.5.5 KSRRB M1200-4.2. ii) PCC with OPC cement design mix M20 cum 6,183.00
@ 300kgs, with 40mm and down size graded granite metal coarse
aggregates @0.64cum and fine aggregates @ 0.43cum , with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirtned-2008
203
Sl. No. Description Unit Rate
Rs. Ps.
26.5.6 KSRRB M1200-4.3. iii) RCC with OPC cement design mix M20 cum 6,600.00
@ 320kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.7 KSRRB M1200-4.4 . iv) PCC with OPC cement design mix cum 6,777.00
M25 @ 340kgs, with 40mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.8 KSRRB M1200-4.5. v) RCC with OPC cement design mix cum 6,843.00
M25 @ 340kgs, with 20mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.9 KSRRB M1200-4.6. vi)"PCC with OPC cement design mix M30 cum 6,946.00
@ 360kgs, with 40mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008
26.5.10 KSRRB M1200-4.7. vii) RCC with OPC cement design mix M30 cum 7,011.00
@ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.11 KSRRB M1200-4.8 viii) RCC with OPC cement design mix M35 cum 7,281.00
@ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.5.12 KSRRB M1200-4.9. ix) RCC with OPC cement design mix M40 cum 7,159.00
@ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008
- Using Batching Plant, Transit Mixer and Concrete PumpMORTH
Specification No.1200, 1500 & 1700
26.6 KSRRB M 1200-5.1. Plain I Reinforced Cement Concrete, in Well cum 6,058.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe. C. Bottom Plug: i) PCC with 43
grade cement design mix M20 @ 320kgs, with 40mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates
@ 0.46cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008. Case- I : Using Concrete Mixer. MORTH Specification
No.1200, 1500 & 1700
26.7 KSRRB M1200-5.2. Plain I Reinforced Cement Concrete, in Well cum 5,579.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe i) PCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum,
with superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008.
Case- II : Using Batching Plant, Transit Mixer and Crane I Concrete
PumpMORTH Specification No.1200, 1500 & 1700
204
Sl. No. Description Unit Rate
Rs. Ps.
26.8 KSRRB M 1200-6.1. Plain I Reinforced Cement Concrete, in Well cum 6,626.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe ii) PCC with OPC cement
design mix M25 @ 340kgs, with 40mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates@ 0.47cum,
with superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008.
Case - I : Using Concrete MixerMORTH Specification No.1200,1500 & 1700
26.9 KSRRB M1200-6.2. Plain I Reinforced Cement Concrete, in Well cum 6,153.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe :PCC with OPC cement design
mix M25 @ 340kgs, with 40mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008
Case -II : Using Batching Plant, Transit Mixer and Crane I Concrete
Pump MORTH Specification No.1200, 1500 & 1700
26.10 KSRRB M1200-7.1 . Plain I Reinforced Cement Concrete, in Well cum 7,464.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe. iii) PCC with OPC cement
design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum,
with superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008.
Case -I : Using Concrete MixerMORTH Specification No.1200,1500 & 1700
26.11 KSRRB M 1200-7.2. Plain I Reinforced Cement Concrete, in Well cum 6,312.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe. :PCC with OPC cement
design mix M30 @ 360kgs, with 40mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum,
with superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
Case - II : Using Batching Plant, Transit Mixer and Crane I Concrete
PumpMORTH Specification No.1200, 1500 & 1700
26.12 KSRRB M1200-8.1. Plain I Reinforced Cement Concrete, in Well cum 7,774.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe. iv) PCC with OPC cement
design mix M35 @ 390kgs, with 40mm and down size graded granite
metal coarse aggregates @0.68cum and fine aggregates@ 0.45cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008. Case
- I : Using Concrete MixerMORTH Specification No.1200, 1500 & 1700
26.13 KSRRB M 1200-8.2. Plain I Reinforced Cement Concrete, in Well cum 6,569.00
Foundation complete as per Drawing and Technical Specification
Concrete to be placed using tremie pipe :PCC with OPC cement design
mix M35 @ 390kgs, with 40mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008
Case - II : Using Batching Plant, Transit Mixer and Crane I Concrete
PumpMORTH Specification No.1200, 1500 & 1700
26.14 KSRRB M1200-9.1. (i) PCC with OPC cement design mix M20 cum 5,789.00
@ 320kgs, with 40mm and down size graded granite metal coarse
aggregates @0 .69cum and fine aggregates @ 0.46cum, with
205
Sl. No. Description Unit Rate
Rs. Ps.
26.15.1 KSRRB M1200-9.2. (ii) PCC with OPC cement design mix cum 6,329.00
M25 @ 340kgs, with 40mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.15.2 KSRRB M 1200-9.3. (iii) PCC with OPC cement design mix M30 cum 7,464.00
@ 360kgs, with 40mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
26.16 E.Top Plug - KSRRB M1200-10.1. (i) PCC design mix M15 with cum 4,907.00
OPC cement @ 240kgs, with 40mm and down size graded granite
metal coarse aggregates @0.63cl.Jm and fine aggregates @ 0.42cum
MORTH Specification No.1200, 1500 & 1700
26.17 KSRRB M1200-10.2. (ii) PCC with OPC cement design mix cum 5,647.00
M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
MORTH Specification No.1200, 1500 & 1700
26.18 KSRRB M1200-10.3. (iii) PCC with OPC cement design mix cum 6,188.00
M25 @ 340kgs, with 40mm and down size graded granite metal
coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
Same as item 2100-11.5. excluding formwork
MORTH Specification No.1200, 1500 & 1700
26.19 KSRRB M1200-10.4. (iv) PCC with OPC cement design mix cum 6,341.00
M30 @ 360kgs, with 40mm and down size graded granite metal
· coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008
Same as item 2100-11.9. excluding formwork
MORTH Specification No.1200, 1500 & 1700
26.20 "KSRRB M 1200-11 .1. Plain I Reinforced Cement Concrete, in Well cum 7,013.00
Foundation complete as per Drawing and Technical Specification F. Well
cap. i) RCC with OPC cement design mix M20 @ 320kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
IS91 03-1999 Reaffirmed-2008.Case -I:Using Concrete Mixer" MORTH
Specification No.1200, 1500 & 1700
26.21 "KSRRB M1200-11.2. Plain I Reinforced Cement Concrete, in Well cum 5,866.00
Foundation complete as per Drawing and Technical Specification.
i) RCC with OPC cement design mix M20 @ 320kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
206
51. No. Description Unit Rate
Rs. Ps.
26.28 "KSRRB M1200-12. Plain I Reinforced Cement Concrete, in Well cum 6,703.00
Foundation complete as per Drawing and Technical Specification
(v) RCC with OPC cement design mix M40 @ 420kgs, with 20mm
and down size graded granite metal coarse aggregates @0.67cum and
fine aggregates@ 0.44cum, with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008. Using Btching Plant, Transit Mixer and
Concrete Pump"MORTH Specification No.1200, 1500 & 1700
26.30 KSRRB M1200-13.2. -do- ii) Beyond 3m upto 10 m depth, Rate of sinking m 2,502.00
= 0.33 m per hour MORTH Specification No. Section 1200
26.34 KSRRB M 1200-14.1. Sinking of 7 m external diameter well ( other than m 2,590.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. A. Sandy Soil, Diameter of well = 7 m. i)
Depth below bed level upto 3.0 m, Rate of sinking= 0.30 m per hour.
MORTH Specification No. Section 1200
26.35 KSRRB M 1200-14.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 3,319.00
= 0.22 m per hour MORTH Specification No. Section 1200
26.39 KSRRB M 1200-15.1. Sinking of 8 m external diameter well ( other than m 3,143.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth below bed level upto 3.0 m. Rate
of sinking at 0.25 m per hour MORTH Specification No. Section 1200
26.40 KSRRB M 1200-15.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 3,799.00
at 0.20 m per hour MORTH Specification No. Section 1200
26.44 KSRRB M1200-16.1. Sinking of 9 m external diameter well (other than m 3,240.00
pneumatic method of sinking ) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications (i) Depth below bed level upto 3.0 m. Rate
of sinking at 0.25 m per hour MORTH Specification No. Section 1200
26.45 KSRRB M1200-16.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 4,168.00
= 0.18 m per hour MORTH Specification No. Section 1200
26.49 KSRRB M1200-17.1. Sinking of 10m external diameter well (other than
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. MORTH Specification No. Section 1200
208
Sl. No. Description Unit Rate
Rs. Ps.
26.49.1 i) Depth below bed level upto 3.0 m. Rate of sinking = 0.20 m I hour m 3,687.00
26.49.2 (ii) Beyond 3m upto 10m depth. Rate of sinking = 0.17 m/ hour m 4,456.00
26.53 KSRRB M 1200-18.1. Sinking of 11 m external diameter well ( other than m 7,936.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. i) Depth below bed level upto 3.0 m, Rate
of sinking= 0.15 m per hour MORTH Specification No. Section 1200
26.54 KSRRB M1200-18.2. -do- (ii) Beyond 3 m upto 10 m depth. Rate of m 7,877.00
sinking at 0.13 m per hour. MORTH Specification No. Section 1200
26.58 KSRRB M1200-19.1. Sinking of 12m external diameter well (other than m 17,298.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. i) Depth below bed level upto 3.0 m, Rate
of sinking at 0.05 m/ hour MORTH Specification No. Section 1200
26.59 KSRRB M1200-19.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 20,453.00
at 0.038 m/hour MORTH Specification No. Section 1200
26.63 KSRRB M1200-20.1. Sinking of Twin D Type well (other than pneumatic m 3,863.00
method of sinking ) through all types of strata namely, sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications. Overall length= 12m, Overall width= 6 m.
(i) Depth from bed level upto 3.0 m, Rate of sinking at 0.18 m/ hour MORTH
Specification No. 1200
26.64 KSRRB M1200-20.2. -do- (ii) Beyond 3m upto 10m depth: Rate of sinking m 4,219.00
at 0.17 m/hour MORTH Specification No. 1200
26.68 KSRRB M1200-21.1 . Sinking of 6 m external diameter well (other than m 2,502.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications
MORTH Specification No.Section 1200
(i) Depth below bed level upto 3.00m, rate of sinking at 0.33m per hour
26.69 KSRRB M1200-21.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 5,754.00
= 0.17 m per hour MORTH Specification No.Section 1200
26.73 KSRRB M1200-22.1 . Sinking of 7 m external diameter well (other than m 3,319.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
(i) Depth below bed level upto 3.0 m. Rate of sinking= 0.22 m per hour
MORTH Specification No. Section 1200
26.74 KSRRB M1200-22.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 5,630.00
= 0.17 m per hour MORTH Specification No. Section 1200
209
51. No. Description Unit Rate
Rs. Ps.
26.78 KSRRB M1200-23.1. Sinking of 8 m external diameter well (other than m 4,056.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth from bed level upto 3.0 m. Rate
of sinking = 0.18 ml hour MORTH Specification No. Section 1200
26.79 KSRRB M1200-23.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 6,114.00
= 0.17 ml hour MORTH Specification No. Section 1200
26.83 KSRRB M1200-24.1. Sinking of 9 m external diameter well (other than m 4,337.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth below bed level upto 3.0 m. Rate
of sinking = 0.17 m per hour MORTH Specification No. Section 1200
26.84 KSRRB M1200-24.2. -do- (ii) Beyond 3m upto 10m depth. Rate of sinking m 6,573.00
= 0.15 m per hour MORTH Specification No. Section 1200
26.88 KSRRB M1200-25.1. Sinking of 10m external diameter well (other than m 5,172.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth below bed level upto 3.0 m, Rate
of sinking= 0.18 ml hour MORTH Specification No. Section 1200
26.89 KSRRB M1200-25.2. -do- (ii) Beyond 3 m upto 10 m depth. Rate of m 6,911.00
sinking= 0.15 m per hour MORTH Specification No. Section 1200
26.93 KSRRB M 1200-26.1. Sinking of 11 m external diameter well (other than m 8,534.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
i) Depth from bed level upto 3.0 m. Rate of sinking = 0.10 m I hour
MORTH Specification No. Section 1200
26.98 KSRRB M1200-27.1 . Sinking of 12m external diameter well (other than m 20,370.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
i) Depth below bed level upto 3.0 m, Rate of sinking= 0.04 m I hour
MORTH Specification No. Section 1200
210
51. No. Description Unit Rate
Rs. Ps.
26.103 KSRRB M1200-28.1. Sinking of Twin D Type Well (other than pneumatic m 4,706.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications.
i) Depth below bed level upto 3.0 m , Rate of sinking = 0.16 m I hour
MORTH Specification No. Section 1200
26.104 KSRRB M1200-28.2.-do- (ii) Beyond 3m upto 10m depth, Rate of m 7,623.00
sinking = 0.15 ml hour MORTH Specification No. Section 1200
26.107 KSRRB M1200.29. Sinking of 6 m external diameter well (other than m 12,180.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3m. Rate of sinking= 0.25 m per hour
MORTH Specification No. Section 1200
26.108 KSRRB M1200.30. Sinking of 7 m external diameter well (other than m 8,913.00
pneumatic methodof sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3m. Rate of sinking= 0.22 m per hour
MORTH Specification No. Section 1200
26.109 KSRRB M1200.31. Sinking of 8 m external diameter well (other than m 10,002.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3 m. Rate of sinking = 0.22 m per hour
MORTH Specification No. Section 1200
26.110 KSRRB M1200.32. Sinking of 9m external diameter well (other than m 11,534.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3 m. Rate of sinking = 0.15 m per hour
MORTH Specification No. Section 1200
26.111 KSRRB M1200.33. Sinking of 10m external diameter well (other than m 12,693.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in soft rock strata upto 3 m. Rate
of sinking = 0.14 ml hour MORTH Specification No. Section 1200
26.112 KSRRB M1200.34. Sinking of 11m external diameter well (other than m 28,164.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in soft rock strata upto 3 m. Rate
of sinking = 0.06 m I hour MORTH Specification No. Section 1200
211
Sl. No. Description Unit Rate
Rs. Ps.
26.113 KSRRB M1200.35. Sinking of 12m external diameter well (other than m 61,997.00
pneumatic method of sinking) through all types of strata namely sandy soil,
-clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in soft rock strata upto 3 m. Rate
of sinking= 0.025 m I hour MORTH Specification No. Section 1200
26.114 KSRRB M 1200.36. Sinking of Twin D Type Well (other than pneumatic m 13,663.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications.
Depth in soft rock strata upto 3 m. Rate of sinking = 0.12 m I hour
MORTH Specification No. Section 1200
26.116 KSRRB M1200.38. Sinking of 7 m external diameter well (other than m 14,680.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in hard rock strata upto 3m. Rate
of sinking = 0.17 m per hour MORTH Specification No. Section 1200
26.117 KSRRB M1200.39. Sinking of 8 m external diameter well (other than m 15,244.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in hard rock strata upto 3 m. Rate
of sinking= 0.17 m per hour MORTH Specification No. Section 1200
26.118 KSRRB M1200.40. Sinking of 9 m external diameter well (other than m 17,403.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in hard rock strata upto 3 m. Rate
of sinking = 0.15 m per hour MORTH Specification No. Section 1200
26.119 KSRRB M1200.41. Sinking of 10m external diameter well (other than m 18,652.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in hard rock strata upto 3 m. Rate
of sinking = 0.12 m per hour MORTH Specification No. Section 1200
26.120 KSRRB M1200.42. Sinking of 11 m external diameter well (other than m 40,879.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
212
Sl. No. Description Unit Rate
Rs. Ps.
26.121 KSRRB M1200.43. Sinking of 12 m external diameter well (other than m 86,581.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. Depth in hard rock strata upto 3 m. Rate
of sinking= 0.020 m/hour MORTH Specification No. Section 1200
26.122 KSRRB M1200.44. Sinking of Twin D Type Well (other than pneumatic m 19,638.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications. Depth in hard rock strata upto 3 m. Rate of sinking = 0.10 m!hour
MORTH Specification No. Section 1200
26.123 KSRRB M 1200-45. Pneumatic sinking of wells with equipment of cum 58,501.00
approved design, drawing and specifications worked by competent and
trained personnel and comprising of compression and decompression
chambers, reducers, two air locks separately for men and plant & materials,
arrangement for supply of fresh air to working chambers, check valves,
exhaust valves, shafts made from steel plates of riveted construction not
less than 6 mm thick to withstand an air pressure of 0.50 MPa, controlled
blasting of hard rock where required, staircases and 1 m wide landing
platforms with railing, arrangement for compression and decompression,
electric lighting of 50 V maximum, proper rooms for rest and medical
examinations and compliance with safety precautions as per IS:4138, all
as per clause 1200.7.6 of MORTH Specifications.
MORTH Specification No. Section 1200
26.124 KSRRB M 1200-46. Sand filling in wells complete as per drawing and cum 2,757.00
technical specifications MORTH Specification No.1207
26.125 KSRRB M 1200-47. Providing steel liner 10 mm thick for curbs and 6 mm Tonne 63,705.00
thick for seining of wells including fabricating and setting out as per detailed
drawing complete as per specifications MORTH Specification No.1200 & 1900
26.127 KSRRB M 1200-48.2. Construction of cement concrete kerb with top and m 330.00
bottom width 115 and 165 mm respectively, 250 mm high in M-20 grade PCC
on M-1 0 grade foundation 150 mm thick, foundation having 50 mm projection
beyond kerb stone, kerb stone laid with kerb lying machine, foundation
concrete laid manually, all complete as per Clause 400.8 complete as per
spcifications. B. Using Concrete Batching and Mixing Plant
MORTH Specification No.408
213
Sl. No. Description Unit Rate
Rs. Ps.
26.130 Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted
in 50mm dia holes drilled in hard rock and grouting in CM 1:1 including
necessary bending, hooking, cutting and handling charges complete,
including the cost of steel. (MORTH clause 1200).
26.130.1 -do- below LWL in open foundation upto 3m. Each 1,224.00
26.130.2 -do- below LWL in open foundation beyond 3m. Each 1,393.00
26.130.3 -do- for well foundation below LWL upto 3m. Each 1,899.00
26.130.4 -do- for well foundation below LWL beyond 3m. Each 2,575.00
Note: 1. KSRRB M 1200-13.3,14.3, 15.3, 16.3, 17.3, 18.3, 19.3, 20.3, 21 .3,
22.3, 23.3, 24.3, 25.3, 26.3, 27.3 and 28.3 beyond 10m upto 20m
a) Add 5% for every additional meter depth of sinking over the rate
for sinking of previous meter
214
BRIDGES - OPEN FOUNDATIONS
215
Sl. No. Description Unit Rate
Rs. Ps.
27.2 KSRRB M2100-1 .2. -do-.ii) 3m to 6 m depth MORTH Specification No. cum 158.00
304
27.3 KSRRB M21 00-1.3.-do- (iii) Above 6 m depth MORTH Specification No. cum 211.00
304
27.4 "KSRRB M21 00-2.1 . Earth work in excavation for foundation of structures cum 48.00
such as culverts, bridges etc., as perdrawing and technical specifications,
including setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and backfilling
with approved material complete as per specifications. B. Mechanical
Means (i) Depth upto 3 m"
MORTH Specification No. 304
27.5 "KSRRB M2100-2.2. -do- B.Mechanical Means (ii) Depth 3m to 6 m" cum 55.00
MORTH Specification No. 304
27.6 "KSRRB M2100-2.3. -do- B.Mechanical Means (iii) Depth above 6 m cum 68.00
MORTH Specification No. 304
27.8 "KSRRB M21 00-3.2. -do- (ii) Ordinary rock (not requiring blastsing) cum 61.00
" B. Mechanical Means Depth upto 3m
MORTH Specification No. 304
216
Sl. No. Description Unit Rate
Rs. Ps.
27.12 "KSRRB M21 00-5.1 . Earth work in excavation for foundation of structures as cum 417.00
per drawing and technical specifications, including setting out, construction
of shoring and bracing, removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with approved material complete
as per specifications. "V. Marshy soil - A. Manual Means Upto 3 m
depth
MORTH Specification No. 304
27.13 "KSRRB M2100-5.2. -do- "V. Marshy soil - B. Mechanical Means cum 109.00
MORTH Specification No. 304
KSRRB M21 00 Back Filling of abutments using wing wall & Returns
27.15 "KSRRB M21 00-7. Earth work in excavation for foundation of structures as cum 258.00
per drawing and technical specifications, including setting out, construction
of shoring and bracing, removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with approved material complete
as per specifications. VI. Backfilling in Marshy Foundation Pits."
MORTH Specification No. 304
27.16 KSRRB M21 00-8. Filling Annular Space Around Footing in Rock Lean cum 5,398.00
cement concrete M 10 mix.
27.17 KSRRB M21 00-9. Sand Filling in Foundation Trenches as per Drawing cum 2,757.00
& Technical Specification
MORTH Specification No. 304
217
Sl. No. Description Unit Rate
Rs. Ps.
27.19 KSRRB M2100-11 . Brick Masonry Work in Cement Mortar 1:3 in cum 6,948.00
Foundation complete excluding Pointing and Plastering as per Drawing
and Technical Specifications MORTH Specification No. 1300
27.20 KSRRB M21 00-11.1 . Cement Mortar 1 :4 ( 1 cement : 4 sand) cum 6,206.00
27.22 "KSRRB M21 00-12.1. Stone Masonry Work in Cement Mortar 1:3 in cum 4,058.00
Foundation complete as per Drawing and Technical Specifications
A. Square Rubble Coursed Rubbie Masonry (first sort)"MORTH
Specification No. 1405.4
27.23 KSRRB M2100-12.2. Stone Masonry Work in Cement Mortar 1:4 in cum 4,022.00
Foundation complete as per Drawing and Technical Specifications. B.
Random Rubble Masonry( coursed I uncoursed)
MORTH Specification No. 1405.4
27.24 KSRRB M2100-13. Plain I Reinforced Cement Concrete M15 with cum 5,871.00
OPC cement@ 240kgs, with 40mm and down size graded granite metal
coarse aggregates @0.84cum and fine aggregates@ 0.56cum in Open
Foundation complete as per Drawing and Technical Specifications
MORTH Specification No. 1500,1700 & 2100
27.25 "KSRRB M21 00-14. Plain /Reinforcement Cement Concrete M20 with cum 5,862.00
OPC cement@ 300kgs, with 40mm and down size graded granite metal
coarse aggregates @0.64cum and fine aggregates @ 0.43cum, with
superplastisiser @31ts confirming to IS91 03-1999 Reaffirmed-2008, in
Open Foundation complete as per Drawing and Technical Specifications
"MORTH Specification No. 1500,1700 & 2100
218
Sl. No. Description Unit Rate
Rs. Ps.
27.28 KSRRB M2100-16.1. Plain I Reinforced Cement Concrete idesign cum 6,410.00
mix M25 with OPC cement @ 340kgs, with 40mm and down size
graded granite metal coarse aggregates @0.70cum and fine aggregates
@ 0 ..47cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008,0pen Foundation complete as per Drawing and
Technical Specifications
D. PCC Grade M-25. Case -I: Using Concrete Mixer
MORTH Specification No. 1500,1700 & 2100
27.29 KSRRB M2100-16.2. Plain I Reinforced Cement Concrete idesign cum 6,023.00
mix M25 with OPC cement @ 340kgs, with 40mm and down size
graded granite metal coarse aggregates @0.70cum and fine aggregates
@ 0.47cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008,0pen Foundation complete as per Drawing and
Technical Specifications Case -II With Batching Plant, Transit Mixer
and Concrete PumpMORTH Specification No.1500, 1700 & 2100
27.30 KSRRB M2100-17.1. Plain I Reinforced Cement Concrete idesign cum 6,473.00
mix M25 with OPC cement @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.70cum and fine aggregates
@ 0.47cum, with superplastisiser @31ts confirming to IS91 03-1999
Reaffirmed-2008,0pen Foundation complete as per Drawing and
Technical Specifications Case - I : Using Concrete Mixer MORTH
Specification No. 1500,1700 & 2100
27.31 KSRRB M2100-17.2. Plain I Reinforced Cement Concrete idesign cum 6,084.00
mix M25 with OPC cement @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.70cum and fine aggregates
@ 0.47cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008,0pen Foundation complete as per Drawing and
Technical Specification Case -II :With Batching Plant, Transit Mixer
and Concrete Pump MORTH Specification No. 1500,1700 & 2100
27.32 KSRRB M21 00-18.1. Plain I Reinforced Cement Concrete in Open cum 6,554.00
Foundation with OPC cement design mix M30 @ 360kgs, with 40mm
and down size graded granite metal coarse aggregates @0.69cum and fine
aggregates@ 0.46cum, with superplastisiser@31ts confirming to IS91 03-1999
Reaffirmed 201 Ocomplete as per Drawing and Technical Specifications.
Case -I : Using Concrete Mixer MORTH Specification No. 1500,1700
& 2100
27.33 KSRRB M2100-18.2. Plain I Reinforced Cement Concrete in Open cum 6,167.00
Foundation with OPC cement design mix M30 @ 360kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008 complete as per Drawing and Technical
Specifications
Case - II : With Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No. 1500,1700 & 2100
219
Sl. No. Description Unit Rate
Rs. Ps.
27.34 KSRRB M2100-19.1. Plain I Reinforced Cement Concrete in Open cum 6,613.00
Foundation with OPC cement design mix M30 @ 360kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008 complete as per Drawing and Technical
Specifications. Case -I : Using Concrete Mixer MORTH Specification
No. 1500,1700 & 2100
27.35 KSRRB M2100-19.2. Plain I Reinforced Cement Concrete in Open cum 6,227.00
Foundation with OPC cement design mix M30 @ 360kgs, with 20mm
and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
IS91 03-1999 Reaffirmed-2008 complete as per Drawing and Technical
Specifications Case - II : With Batching Plant, Transit Mixer and
Concrete Pump
MORTH Specification No. 1500,1700 & 2100
27.36 KSRRB M2100-20.1. Plain I Reinforced Cement Concrete in Open cum 6,836.00
Foundation with OPC cement design mix M35 @ 390kgs, with 20mm
and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @31ts confirming
to IS9103-1999 Reaffirmed-2008. Case -I : Using Concrete Mixer
MORTH Specification No. 1500,1700 & 2100
27.37 KSRRB M21 00-20.2. Plain I Reinforced Cement Concrete in Open cum 6,451.00
Foundation with OPC cement design mix M35 @ 390kgs, with 20mm
and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008. Case II: With Batching Plant, Transit
Mixer and Concrete Pump
MORTH Specification No. 1500,1700 & 2100
Note: 1. KSRRB M21 00-1.1, KSRRB M21 00-1.2, KSRRB M21 00-1.3,
KSRRB M2100-2.1, KSRRB M2100-2.2, KSRRB M2100-2.3,
KSRRB M21 00-3.1, 3.2, 4.1, 4.2 Add 10% extra for dewatering
charges and specification is to be modified accordingly.
2. KSRRB M21 00-5.1 : Add 30% extra for dewatering charges and
specification is to be modified accordingly.
3. KSRRB M21 00-5.2: Add 20% extra for dewatering charges and
specification is to be modified accordingly.
4. Add 15% extra for shoring and shuttering for items KSRRB
M21 00-5.1 specification is to be modified accordingly.
5. Add 10% extra for shoring and shuttering for items KSRRB
M21 00-5.2 specification is to be modified accordingly.
6. In case of rock, foundation beyond 3m is not dug and hence
not included.
7. It is assumed that Marshy soil will be available upto 3m depth
only.
220
BRIDGES - SUB-STRUCTURE
221
Sl. No. Description Unit Rate
Rs. Ps.
28.2 KSRRB M2200-2. Pointing with cement mortar (1 :3 ) on brick work in Sqm 56.00
substructure as per Technical Specifications, complete as per specifications
MORTH Specification No. 1300 & 2200
28.3 KSRRB M2200-3. Plastering with cement mortar (1 :3) on brick work in Sqm 136.00
sub-structure as per Technical Specifications, complete as per specifications
MORTH Specification No. 1300 & 2200
28.4 KSRRB M2200-4.1 . Stone masonry work in cement mortar 1:3 for cum 3,979.00
substructure complete as per drawing and Technical Specifications complete
as per specifications. A. Random Rubble Masonry (uncoursed)
MORTH Specification No. 1400 & 2200
28.5 KSRRB M2200-4.2. -do- B. Coursed rubble masonry (first sort) cum 4,046.00
MORTH Specification No. 1400 & 2200
28.6 KSRRB M2200-4.3. -do- C. Ashlar masonry ( first sort ) Plain ashlar cum 5,006.00
MORTH Specification No. 1400 & 2200
28.7.1 KSRRB M2200-5.1 M15 with OPC cement@ 240kgs, with 40mm cum 6,238.00
and down size graded granite metal coarse aggregates @0.63cum and
fine aggregates @ 0.42cum
a) upto 5mtr height
28.7.2 KSRRB M2200-5.2. Design mix M20 with OPC cement @ 300kgs, cum 6,228.00
with 40mm and down size graded granite metal coarse aggregates
@0.64cum and fine aggregates @ 0.43cum, with superplastisiser @31ts
confirming to 159103-1999 Reaffirmed-2008,
b) upto 5 m height
28.7.3 KSRRB M2200-5.3. Design mix M25 With OPC cement @ 340kgs, cum 6,756.00
with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to IS91 03-1999 Reaffirmed-2008
c) - i) Upto 5 m height
222
51. No. Description Unit Rate
Rs. Ps.
28.7.4 K8RRB M2200-5.4. Design mix M25 @with OPC cement 340kgs, cum 7,021.00
with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- ii) For height above 5 m and upto 10 m.
28.7.5 K8RRB M2200-5.5. Design mix M25 with OPC cement@ 340kgs, cum 7,353.00
with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
-iii) For height above 10m.
28.7.6 K8RRB M2200-5.6. Design mix M30 with OPC cement@ 360kgs, cum 6,911.00
with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- i) upto 5 m height
28.7.7 K8RRB M2200-5.7.Design mix M30 with OPC cement@ 360kgs, cum 7,182.00
with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
d) PCC Grade M-30- ii) For height above 5 m and upto 10m.
28.7.8 K8RRB M2200-5.8. Design mix M30 with OPC cement @ 360kgs, cum 7,539.00
with 40mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
-iii) For height above 10m.
28.7.9 K8RRB M2200-5.9. Design mix M20 with OPC cement@ 320kgs, cum 6,571.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- i) Upto 5 m height.
28.7.10 K8RRB M2200-5.1 0. Design mix M20 with OPC cement@ 320kgs, cum 6,861.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- ii) For height, upto 10m
28.7.11 K8RRB M2200-5.11. Design mix M20 with OPC cement @ 320kgs, cum 7,151.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
-iii) For height above 10m.
28.7.12 K8RRB M2200-5. 12.Design mix M25 with OPC cement @ 340kgs, cum 6,839.00
with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to 1891 03-1999 Reaffirmed-2008
- i) Upto 5m height
223
Sl. No. Description Unit Rate
Rs. Ps.
28.7.13 K8RRB M2200-5.13. Design mix M25 with OPC cement @ 340kgs, cum 7,081.00
with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- ii)For height, upto 10m,
28.7.14 K8RRB M2200-5.14.Design mix M25 with OPC cement @ 340kgs, cum 7,442.00
with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates@ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- iii) For height, above 10m,
28.7.15 K8RRB M2200-5.15. Design mix M30 with OPC cement@ 360kgs, cum 6,991.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- i) Upto 5m height,
28.7.16 K8RRB M2200-5.16. Design mix M30 with OPC cement@ 360kgs, cum 7,203.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
g) RCC Grade M-30- ii) For height, upto 10m,
28.7.17 K8RRB M2200-5.17. Design mix M30 with OPC cement @ 360kgs, cum 7,505.00
with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates@ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- iii) For height, above 1Om,
28.7.18 K8RRB M2200-5.18.Design mix M35 with OPC cement @ 390kgs, cum 7,267.00
with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- i) U pta Sm height,
28.7.19 K8RRB M2200-5.19. Design mix M35 with OPC cement @ 390kgs, cum 7,443.00
with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates@ 0.45cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
- ii) For height, upto 1Om,
28.7.20 K8RRB M2200-5.20. Design mix M35 with OPC cement @ 390kgs, cum 7,694.00
with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates@ 0.45cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008
-iii) For height, above 10m,
28.7.21 PCC grade M15 with OPC cement@ 240kgs, with 40mm and down cum 6,368.00
size graded granite metal coarse aggregates @0.63cum and fine
aggregates@ 0.42cum above 5mtr height
28.7.22 PCC grade design mix M20 with OPC'cement @ 300kgs, with 40mm cum 6,287.00
and down size graded granite metal coarse aggregates @0.64cum and
fine aggregates@ 0.43cum, with superplastisiser @31ts confirming to
189103-1999 Reaffirmed-2008, above 5mtr height
224
Sl. No. Description Unit Rate
Rs. Ps.
28.15 KSRRB M2200-11. Supplying, fitting and fixing in position true to line and Each 20.00
level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and Tonne
clause 2000.3 of MORTH specifications complete including all accessories bearing
as per drawing and Technical Specifications complete as per specifications capacity
MORTH Specification No.1 000, 2000 & 2200
28.16 KSRRB M2200-12. Supplying, fitting and fixing in position true to line Tonne 1,295.00
and level sliding plate bearing with PTFE surface sliding on stainless
steel complete including all accessories as per drawing and Technical
Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2000.4
of MORTH Specifications complete as per specifications
MORTH Specification No.2000 & 2200
225
51. No. Description Unit Rate
Rs. Ps.
28.17 KSRRB M2200-13. Supplying, fitting and fixing in position true to line and c.c. 1.00
level elastomeric bearing conforming to IRC: 83 (Part-11) section IX and
clause 2000.5 of MORTH specifications complete including all accessories
as per drawing and Technical Specifications complete as per specifications
MORTH Specification No. 2000 & 2200
28.18 KSRRB M2200-14. Supplying, fitting and fixing in position true to line and Tonne 1,294.00
level sliding plate bearing with stainless steel plate sliding on stainless
steel plate with mild steel matrix complete including all accessories as per
drawing and Technical Specifications complete as per specifications
MORTH Specification No.2000 & 2200
28.19 KSRRB M2200-15. Supplying, fitting and fixing in position true to line and Tonne 426.00
level POT-PTFE bearing consisting of a metal piston supported by a disc
or unreinforced elastomer confined within a metal cylinder, sealing rings,
dust seals, PTFE surface sliding against stainless steel mating surface,
complete assembly to be of cast steel/fabricated structural steel, metal
and elastomer elements to be as per IRC: 83 part-1 & II respectively and
other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2000.6 of
MORTH Specifications complete as per drawing and approved Technical
Specifications complete as per specifications
MORTH Specification No.2000 & 2200
Note : 1. In case of stone masonry, the size of the weep hole shall be
150mm x 80mm or circular with 150mm diameter.
2. For structure in stone masonry, the weep holes shall be deemed
to be included in the item of stone masonry work and shall not
be paid separately.
226
BRIDGES - CONCRETE
SUPERSTRUCTURE
227
Sl. No. Description Unit Rate
Rs. Ps.
228
Sl. No. Description Unit Rate
Rs. Ps.
229
Sl. No. Description Unit Rate
Rs. Ps.
230
Sl. No. Description Unit Rate
Rs. Ps.
231
Sl. No. Description Unit Rate
Rs. Ps.
232
Sl. No. Description Unit Rate
Rs. Ps.
cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates
@ 0.45cum, with superplastisiser @31ts confirming to IS9103-1999
Reaffirmed-2008, Case- I : Using Concrete Mixer MORTH Specification
No. 1500,1600 & 1700
233
Sl. No. Description Unit Rate
Rs. Ps.
234
Sl. No. Description Unit Rate
Rs. Ps.
238
BRIDGES-RIVER TRAINING WORKS
AND PROTECTIONWORKS
239
51. No. Description Unit Rate
Rs. Ps.
30.1 KSRRB M2500-1.1 . Providing and laying boulders apron on river bed for cum 1,375.00
protection against scour with stone boulders weighing not less than 40 kg
each complete as per drawing and Technical specification complete as per
specifications. A. Boulder Laid Dry Without Wire Crates
MORTH Specification No. 2503
30.2 "KSRRB M2500-1.2. Providing and laying of boulder apron laid in wire crates cum 2,089.00
made with 4mm dia Gl wire conforming to IS: 280 & IS:4826 in 1OOmm x
1OOmm mesh (weaved diagonally) including 10% extra for laps and joints
laid with stone boulders weighing not less than 40 kg each complete as
per specifications. B. Boulder Apron Laid in Wire Crates"
MORTH Specification No. 2503
30.8 "KSRRB M2500-5.2. -do- B. Cement Concrete Blocks Grade M-15" cum 6,040.00
MORTH Specification No. 2505
30.9 KSRRB M2500-6. Dry rubble flooring Construction of dry rubble flooring cum 1,708.00
at cross drainage works for relatively less important works complete as per
specifications
MORTH Specification No. 2506
240
Sl. No. Description Unit Rate
Rs. Ps.
30.13 KSRRB M2500-10.Curtain wall complete as per drawing and Technical cum 5,213.00
Specifications. B. Cement Concrete Grade M-15
MORTH Specification No. 2507.2
30.16 KSRRB M2500-13 Gabian Structure for Erosion Control, River Training cum 5,728.00
Works and Protection works Providing and constructing gabian structures
for erosion control, river training works and protection works with wire
crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by
cross netting, made from 4 mm galvanised steel wire@ 32 kg per 10 sqm
having minimum tensile strength of 300 Mpa conforming to IS:280 and
galvanizing coating conforming to IS:4826, woven into mesh with double
twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with
least dimension of 200 mm, all loose ends to be securely tied with 4 mm
galvanised steel wire complete as per specifications
MORTH Specification No. 2503.3
Note : KSRRB 2500-S.A toe wall for toe protection can either be in dry rubble
masonry in case of dry rubble pitching or pitching with stones in wire
crates or it can be in PCC M-15 nominal mix if cement concrete block
have been used for pitching. Rates for toe wall can be adopted from
respective clauses depending upon approved design. The rate for
excavation for foundation, dry rubble masonry and PCC M-15 have
been analysed and given in respective chapters.
241
EXPANSION JOINTS
242
Sl. No. Description Unit Rate
Rs. Ps.
31.3 KSRRB M2600-3. (ii) Providing & fixing 20 mm thick compressible fibre m 139.00
board in expansion joint complete as per drawing & Technical Specification
complete as per specifications MORTH Specification No. 2605
31.5 KSRRB M2600-5.(iv) Providing and filling joint sealing compound as per m 23.00
drawings and technical specifications with coarse sand and 6 per cent
bitumen by weight complete as per specifications
MORTH Specification No. 2605
KSRRB M2600- Asphaltic Plug Joint
31.6 KSRRB M2600-6. Providing and laying of asphaltic plug joint to provide m 1,163.00
for horizontal movement of 25 mm and vertical movement of 2 mm, depth
of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750
mm (in traffic direction), covered with a closure plate of 200mm x 6mm of
weldable structural steel conforming to IS: 2062, asphaltic plug to consist of
polymer modified bitumen binder, carefully selected single size aggregate of
12.5 mm nominal size and a heat resistant foam caulking/backer rod , all as
per approved drawings and specifications, complete as per specifications
MORTH Specification No. 2600
KSRRB M2600- Elastomeric Slab Seal Expansion Joint
31.7 KSRRB M2600-7. Providing and laying of an elastomeric slab steel m 17,325.00
expansion joint, catering to right or skew (less than 20 deg., moderately
curved with maximum horizontal movement upto 50 mm, complete as
per approved drawings and standard specifications to be installed by
the manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer's instructions for installation and clause
2600.6 of MORTH specifications for road & bridge works complete as per
specifications. MORTH Specification No. 2606
243
Sl. No. Description Unit Rate
Rs. Ps.
31 .11 KSRRB M2600-11 Providing and laying of a modular strip box seal expansion m 8,965.00
joint catering to a horizontal movement beyond 140mm and upto 210mm,
complete as per approved drawings and standard specifications to be
installed by the manufacturer/supplier or their authorised representative
ensuring compliance to the manufacturer's instructions for installation.
complete as per specifications. MORTH Specification No. 2600
Note:
1. Guidelines laid down vide the MORTH circular No. RW/NH-34059/1/96-S&R
dated 30-11-2000 and subsequent corrigendum dated 25-01-2001 may be
referred for expansion joints.
2. The nominal size of aggregates shall be 12.5 mm for depth of joint upto
75mm and 20mm for joints of depth more than 75mm.
3. The installation shall be done by the manufacturer or his authorised
represesntative to the satisfaction of the Engineer.
4. The concreting for joining the expansion joint asssembly with the deck has
not been included in this analysis as the same is catered in the quantities
of RCC deck.
5. The anchoring bars of the expansion joint assembly shall be welded to
the main reinforcement of the deck.
244
BRIDGES -WEARING COAT &
APPURTENANCES
245
Sl. No. Description Unit Rate
Rs. Ps.
32.3 KSRRB M2700-3. Construction of RCC railing of M30 Grade in-situ with m 1,570.00
20 mm nominal size aggregate, true to line and grade, tolerance of vertical
RCC post not to exceed 1 in 500, centre to centre spacing between vertical
post not to exceed 2000 mm, leaving adequate space between vertical
post for expansion, complete as per approved drawings and technical
specifications complete as per specifications
MORTH Specification No. 2703,1500,1600 & 1700
32.4 KSRRB M2700-4. Providing, fitting and fixing mild steel railing using m 2,907.00
ISMC @ 29.46 kg/m, MS flats @ 10.12 kg/m and MS bars @ 1.80 kg/m
as per drawing and Technical Specification including bolts and nuts etc.,
complete as per specifications MORTH Specification No. 2703.2, 1900
32.5 KSRRB M2700-5. Drainage Spouts using 100mm class '8' Gl pipe as No 1,645.00
per drawing and Technical specification including clamps and nuts etc.,
complete as per specifications MORTH Specification No. 2705
32.8 KSRRB M2300-16. Providing and laying Cement concrete wearing coat cum 10,278.00
with OPC cement design mix M30@ 360kgs, with 20mm and down size
246
Sl. No. Description Unit Rate
Rs. Ps.
32.10 KSRRB M2700-10. Providing and fixing Helical pipes in voided concrete m 371.00
slabs complete as per specifications MORTH Specification No. 1700 & 1800
32.13 Providing and laying 3mm thick asphalt seal pad made of actatic Sqm 442.00
polypropylene polymer (app) modified bituminous pad reinforced with
non woven polyester mat of high bear strength as a carrier (confirming to
ASTM - 06222 (S) Specification) on concrete bridge deck slab complete
as per specifications.
247
BRIDGES - REPAIR AND
REHABILITATION
248
Sl. No. Description Unit Rate
Rs. Ps.
33.1 KSRRB M2800-1 . Removal of existing cement concrete wearing Sqm 86.00
coat including its disposal complete as per Technical Specification
without causing any detrimental effect to any part of the bridge structure
and removal of dismantled material with all lifts and lead complete as
per specifications
MORTH Specification No.2809
33.2 KSRRB M2800-2. Removal of existing asphaltic wearing coat Sqm 61.00
comprising of 50 mm thick asphaltic concert laid over 12 mm thick
mastic asphalt including disposal with all lift and lead complete as per
specifications
MORTH Specification No. 2809
33.3 KSRRB M2800-3. Guniting concrete surface with cement mortar Sqm 625.00
applied with compressor after cleaning surface and spraying with epoxy
complete as per Technical Specification.
MORTH Specification No.2807
33.4 KSRRB M2800-4. Providing and inserting nipples with approved No 93.00
fixing compound after drilling holes for grouting as per Technical
Specifications including subsequent cutting/removal and sealing of the
hole as necessary of nipples after completion of grouting with Cement
I Epoxy complete as per specifications
MORTH Specification No. 2800
249
Sl. No. Description Unit Rate
Rs. Ps.
33.10 KSRRB M2800-9. Removal of defective concrete, cleaning the surface Sqm 295.00
thoroughly, applying the shotcrete mixture mechanically with compressed
air under pressure, comprising of cement; sand, coarse aggregates, water
and quick setting compound in the proportion as per clause 2800.7 .1 .
sand and coarse aggregates conforming to IS: 383 and table 1 of IS: 9012
respectively, water cement ratio ranging from 0.35 to 0.50, density of gunite
not less than 2000 kg/cum, strength not less than 25 Mpa and workmanship
conforming to clause 2800.7.6 complete as per specifications
MORTH Specification No. 2807
33.11 KSRRB M2800-1 0. Applying pre-packed cement based polymer mortar Sqm 431.00
of strength 45 Mpa at 28 days for replacement of spa lied concrete complete
as per specifications
MORTH Specification No. 2800
33.12 KSRRBM 2800-11 . Eproxy bonding of new concrete to old concrete Sqm 651.00
complete as per specifications
MORTH Specification No. 2805
33.13 KSRRB M2800-12.1. Providing external prestressing with high tensile Tonne 4, 19,796.00
steel wires I strands for taking output of 1 MT, including drilling for passage
of prestessing steel, all accessories for stressing and stressing operation
and grouting complete as per drawing and Technical Specification
MORTH Specification No. 2810
33.14 KSRRB M2800-12.2. Providing external prestressing with high tensile Tonne 3,05,569.00
steel wires /strands for taking output of 3.10 MT, including drilling for passage
of prestessing steel, all accessories for stressing and stressing operation
and grouting complete as per drawing and Technical Specification
MORTH Specification No. 2810
33.15 KSRRB M2800-12.3. Providing external prestressing with high tensile Tonne 2,72,855.00
steel wires I strands for taking output of 9.28 MT, including drilling for
passage of prestessing steel, all accessories for stressing and stressing
operation and grouting complete as per drawing and Technical Specification
MORTH Specification No. 2810
250
Sl. No. Description Unit Rate
Rs. Ps.
33.22 KSRRB M2800-19. Repair of Crash Barrier. Repair of concrete crash m 343.00
barrier with cement concrete of M-30 grade by cutting and trimming the
damaged portion to a regular shape, cleaning the area to be repaired
thoroughly, applying cement concert after erection of proper form work
complete as per specifications
33.23 KSRRB M2800-20. Repair of RCC Railing Carrying out repair of RCC m 182.00
M-30 railing to bring it to the original shape complete as per specifications
33.24 KSRRB M2800-21 . Repair of Steel Railing to bring it to the original m 252.00
shape complete as per specifications
251
PIPE CULVERTS
252
51. No. Description Unit Rate
Rs. Ps.
34.9 Providing and constructing granite I trap I basalt size stone masonry cum 5,005.00
in basement with cement mortar 1:6, edges of stones chistle dressed
in courses not less than 15 ems high , bond stones at two m. apart in
each course including cost of materials, labour, curing complete as per
specifications. KBS 5.1.13
34.1 0 Providing and constructing granite I trap I basalt size stone masonry in
superstructure with cement mortar & edges of stones chistle dressed in
courses not less than 15 ems high, bond stones at two m. apart in each
course including cost of materials, labour, scaffolding, curing complete as
per specifications. KBS 5.1.13
34.10.1 - do - with cement mortar 1:6 cum 5,249.00
34.10.2 - do - with cement mortar 1:4 cum 5,393.00
34.11 Providing and laying in position plain cement concrete of mix 1:2:4 with cum 5,293.00
cement @ 240kgs, with 20mm and down size graded granite metal coarse
aggregates@ 0.69 cum and fine aggregtes@ 0.459cum, machine mixed,
concrete laid in layers not exceeding 15 ems. thick, well compacted, for
coping. Including cost of all materials, labour, HOM of machinery, curing
complete as per specifications.
Specification No. KBS 4.1, 4.2
34.13 Providing ruled pointing to coursed stone masonry with cement mortar,
20mm deep, after raking joints to depth of 20mm nicely lining, including
cost of materials, labour, curing complete as per specifications.
34.13.1 - do - cement mortar 1 :4 Sqm 95.00
34.13.2 - do - cement mortar 1 :3 Sqm 98.00
34.14 Providing and constucting pithcing I Revetment of 30 em thick on slopes Sqm 381.00
using granite/basalt/trap/stones of surface area not less than 0.04 sqm and
wedged with spalls including cost of all materials, labour etc., complete as
per specification.
254
Sl. No. Description Unit Rate
Rs. Ps.
NOTE:
1. In case of cement cradle bedding, quantity of PCC M-15 is to be calculated
as per design and priced separately and added.
2. The rate analysis does not include excavation I cement/ masonry works
in head walls, backfilling, protection works and parapet walls. The same
are to be calculated as per approved design and drawings and priced
separately on rates available under respective chapters.
255
MAINTENANCE OF ROADS
256
51. No. Description Unit Rate
Rs. Ps.
35.4 KSRRB 3000 Filling Pot-holes and Patch Repairs with Open-Graded
Premix Surfacing, 20 mm
KSRRB M3000-4. Removal of all failed material, trimming of completed Sqm 157.00
excavation to provide firm vertical faces, cleaning of surface, applying
tack coat on the sides and base of excavation at 0.40 kgs/sqm as per
clause 500.3, and filling the pot holes with open graded pre-mix material
as per clause 500.11, & sealing the surface with Type-B seal coat as per
clause 513 compacting the surface to form a smooth continuous surface,
including cost of all materials and labour complete as per specifications.
MORTH Specification No. 3004.2
35.5 KSRRB 3000 Filling Pot-holes and Patch Repairs with Bituminous
Concrete, 40 mm
KSRRB M3000-5. Removal of all failed material, trimming of completed Sqm 285.00
excavation to provide firm vertical faces, cleaning of surface, applying
tack coat on the sides and base of excavation at 2.5kg/1 Osqm as per
clause 500.3, filling back the pot holes with hot bituminous material as
per clause 500.4, compacting, trimming and finishing the surface to
form a smooth continuous surface, all as per clause 3004.2 complete
as per specifications MORTH Specification No. 3004.2
35.6 KSRRB M3000-6. Filling of crack using slow- curing bitumen emulsion m 3.00
and applying crusher dust in case crack are wider than 3mm complete
as per specifications. MORTH Specification No. 3004.3.3
35.7 KSRRB M3000-7. Applying crusher dust to areas of road where bleeding m 2.00
of excess bitumen has occurred complete as per specifications
MORTH Specification No. 3004.4
35.8 KSRRB 3000 Repair of Joint Grooves with Epoxy Mortar
KSRRB M3000-8. Repair of spalled joint grooves of contraction joints, m 344.00
longitudinal joints and expansion joints in concrete pavements using
257
51. No. Description Unit Rate
Rs. Ps.
NOTE:
1. The earth stripped from earthen shoulders to be dumped on the side
slopes locally for disposal.
2. The constituents of epoxy mortary/ epoxy concrete will be as per the
instruction and manual of the manufacturer.
3. 35.14.3 & 35.13.2 Should be operated after obtaining approval from S.E.
258
REINFORCED EARTH STRUCTURE
259
51. No. Description Unit Rate
Rs. Ps.
36.1 KSRRB M31 00-2. Assembling, joining and laying of reinforcing elements. m 262.00
A. With reinforcing element of steel I aluminium strips I polymeric
strips
MORTH Specification No. 3102
36.2 KSRRB M3100-3. Assembling, joining and laying of reinforcing elements Sqm 385.00
B. With reinforcing element of synthetic geogrids
MORTH Specification No. 3102
NOTE:
5. Length of reinforcing strips will vary with the height of wall and will be
as per approved design and drawings.
6. The earth fill material shall be clean, free draining, granular with high
friction and low cohesion, non-corrosive, coarse grained with not 10
percent of particles passing 75 micron sieve, free of any deleterious
matter, chlorides, salts, acids, alkalie.
iv) Cost of reinforcing elements including theilr fixing and joining with
the facial pannels.
260
OTHER ITEMS
261
Sl. No. Description Unit Rate
Rs. Ps.
37.3 Providing chain link fencing 50mm size of 8 guage properly stretched Sqm 659.00
between existing rectangular poles and fixed with suitable bolts & nuts, the
free ends shall be welded to the pole and block pipe at top and bottom as
required including cost of all materials, labour, lead and lifts and as per the
directions of the Engineer-in-charge of work including two coats of approved
quality paint over one coat of shop paint
37.4 Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 m 324.00
including removing the bends, cutting the pipe, and fixing pipe in between
the existing two verticle poles (M.S. rectangular poles) and spot welding
the chain link with M.S. block pipe including cost of all materials wastage in
cutting, and scaffolding wherever necessary with all lead and lift as directed
by the Engineer-in-charge of work etc., complete including two coats of
approved quality paint over one coat of shop paint.
37.5 Providing barbed Gl wire fencing of 12x12 gauge drawn into stone pillars m 28.00
or iron pillars including drawing in holes wherever necessary excluding the
cost of pillars but including the cost of barbed wire and binding wire etc.,
complete.
37.6 Providing corrugated cement asbestos Ridge sheets set in C.M. 1:3 m 436.00
and pointed with C.M. 1:3.
37.7 Providing Mangalore Ridge tiles set in C.M . 1:2 and pointed with m 176.00
C.M. 1:2.
37.9 Supplying and fixing new Mangalore tiles on existing reepers Sqm 363.00
37.10 Removing and fixing old Mangalore ridge tiles including pointing with m 63.00
C.M. 1:3.
262
Sl. No. Description Unit Rate
Rs. Ps.
37.11 Repairs to roof with available corrugated zinc sheets/ A.C.sheets with new Sqm 63.00
J bolts, screws and washers etc., on existing reeper and rafters.
37.12 Repairing door and window frames with available wood to the required size. Sqm 420.00
37.13 Repairing and fixing shutters (panelled or glazed) to doors, windows, Sqm 420.00
ventilators and cupboards.
37.14 Fixing old eve board with necessary screws and approved painting two m 16.00
coats.
37.15 Providing and fixing plain rolled glass 3mm thick with T.W beading of 10mm Sqm 706.00
thick.
37.16 Providing and fixing 4mm thick glass panes to steel windows including T.W. Sqm 920.00
beading of 10 mm thick and 2 coats of approved paints.
37.19 Providing and fixing M.S bars to windows and ventilators including cutting Kgs 100.00
making holes in frame work with two coats of approved paints.
37.20 Labour charges for fixing iron bars to windows including cutting fixing and Kgs 52.00
making holes in the frame work and painting two coats with approved paint
etc., complete (excluding the cost of iron bars)
37.21 Repairs to cornice or coping or mortar band, 15 em deep and 8cm projection Sqm 63.00
for damaged portion.
37.22 Removing cuddappa slab flooring and stacking the material with a lead of Sqm 31.00
50 meters.
37.23 Removing and resetting Mangalore tiles and replacing broken ones wherever Sqm 16.00
necessary (excluding cost of new tiles).
37.27 Labour charges for fixing plain, frosted or pin headed glass panels Sqm 277.00
(clear glass area) with teak wood beading.
37.29 Providing and fixing mortar and pestle stone with suitable size of pestle
stone including three line dressing for top and two line dressing for the
exposed faces
263
Sl. No. Description Unit Rate
Rs. Ps.
37.30 Providing wall black boards in CM 1:3 with two coats of black paint including Each 919.00
finishing etc., complete.
37.31 Providing and fixing mortise locks heavy duty to doors. No 599.00
37.32 Providing and fixing hydraulic door closures-with mounting heavy duty. No 1,644.00
37.33 Providing and fixing hydraulic door closures-Aluminium body. No 1,136.00
37.34 Cleaning of glazed tiles. Sqm 50.00
37.38 Cutting of road surface for pipeline trenches and disposing of the cum 340.00
excavated stuff as directed including barricading, danger lighting etc., in
the Asphalt surface road.
37.40 Cutting of road surface for pipeline trenches and disposing of the cum 607.00
excavated stuff as directed including barricading, danger lighting etc., in
the Cement concrete road.
37.42 Dismantling Mangalore tiles roof and stacking the material within a radius
of 50 meters.
264
Sl. No. Description Unit Rate
Rs. Ps.
37.44 Dismantling weather proof course and removing and conveying the debris cum 468.00
to a distance upto 200rn.
37.45 Dismantling Madras terrace jack arch roof including rafters and stacking Sqm 156.00
the materials with a lead upto 50m and removing the debris to a distance
upto 200m.
37.46 Dismantling stone slab roofing over wooden reepers or RCC battens Sqm 156.00
(dismantling reapers and battens to be paid for separately) including
stacking of serviceable materials and disposal of unserviceable within 200m
lead (with in average thickness of 10 ems
37.47 Dismantling burnt brick masonry in clay mortar/lime mortar/cement mortar cum 156.00
and stacking the bricks within a radius of 50m and removing the debris to
a distance upto 200m.
37.48 Dismantling size stone masonry in clay mortar and stacking the size stone cum 172.00
within a radius of 50m and removing the debris to a distance upto 200m.
37.49 Dismantling the tile work in floor and roof laid in cement or surki mortar Sqm 31.00
including stacking the materials with in 50 m lead of tiles thickness 1Omm
to 25mm.
37.50 Dismantling plastering and removing the debris with a lead upto 200m. Sqm 23.00
37.51 Dismantling cement concrete flooring or plain cement concrete work Sqm 55.00
including removing and conveying the debris to distance upto 200m (within
average thickness of 15 ems).
37.52 Dismantling barbed wire or flexible wirer rope in fencing including making m 5.00
rolls and stacking within 50m lead.
37.53 Dismantling expanded metal or IRC fabric with weld mesh necessary battens Sqm 16.00
and beading etc., including stacking the serviceable materials within 50 m lead.
37.54 Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge Sqm 1,151.00
with Mathi or Nandi wood patties of 50 mm x 12 mm size, including two
coats approved paint etc., complete. (Including cost of screws).
37.55 _do_ with weld mesh 75 mm X 25 mm 6G X 10G. Sqm 1,091.00
37.56 Removing and resetting of footpath slab Sqm 125.00
37.57 Removing and resetting of kerb stones m 62.00
37.58 Supplying water storage tanks made of virgin polymer (LLDPE) with two Ltr. 6.00
layers outer Black or Blue and inner White layer of approved quality and
make, conforming to I.S.I./ISO/SSI specifications.
37.59 Providing and laying plain/reinforced cement concrete for side drains using
M20 nominal mix concrete with OPC cement at 300 kgs. with 20mm and
down size granite metal coarse aggregates at 0.69 cum and fine aggregates
at 0.43 cum machine mixed, well compacted for walls and bottom including
centering, shuttering, cost of materials, HOM of machinery, curing etc.,
complete excluding cost of steel as per MORTH specification No. 1500,
1700,2200.
37.59.1 -do- Wall & bottom thickness 10cm cum 7,138.00
37.59.2 -do- Wall & bottom thickness 15cm cum 6~<>00
265
Sl. No. Description Unit Rate
Rs. Ps.
37.60 Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed Each 4,950.00
in reinforced cement concrete poles of size 0.1 Ox0.1 Ox2.60mtrs in cement
concrete M 20 proportion using 20mm and down size graded metal machine
mixed with 1Omm dia main steel bars and 8mm dia stirpes as shown in
drawing. The board shall be provided with 12mm thick cement plaster in
cement mortar 1:3 on both the sides. The poles shall be embedded in the
ground for a depth of 0.5 mtrs with cement concrete M 10 proportion. The
board shall be fixed as per the drawing and at the place indicated by the
Engineering charge of the work. The cost includes excavation, cost of all
materials, cost of steel, centering, transportation charges, fixing charges
etc., The work shall be carried out as per the detailed specifications,
drawings and directions of the Engineer in charge of the work.
37.61 Providing and fixing sign board of size 60x60cm equilateral triangle using Each 3,450.00
M.S sheet 5mm thick with RCC pole of size 0.15x0.15x2.3 mtr made out of
cement concrete M 20 proportion using 20mm and down size graded metal
machine mixed with 1Omm dia main steel bars and 8mm dia stirupps as
shown in drawing. The poles shall be embedded in the ground for a depth
of 0.6mtrs with cement concrete M 10 proportion. The board shall be fixed
as per the drawing and at the place indicated by the Engineering charge of
the work. The cost includes excavation, cost of all materials, cost of steel,
centering , transportation charges, fixing charges etc., The work shall be
carried out as per the detailed specifications, drawings and directions of
the Engineer in charge of the work.
37.62 Providing and constructing informatory name board of size 1. 75m x 1. 75m Each 6,650.00
with Burnt brick masonry in CM 1:6 with non-modular bricks of standard
size of class designation 50 (table moulded). The foundation shall be
provided with cement concrete M 7.5 for a depth of 10cms and with size
stone masonry with Cement Mortar 1:6 and copping concrete with cement
concrete M 10 as indicated in the drawing. The name board shall be provided
with 12mm thick plaster in CM 1:6 on both the sides including rounding
of corners. The name board shall be provided with painting with 2 coats
of enamel paint. The board shall be fixed as per the drawing and at the
place indicated by the Engineering charge of the work. The cost includes
excavation, cost of all materials, centering, transportation charges, fixing
charges etc., The work shall be carried out as per the detailed specifications,
drawings and directions of the Engineer in charge of the work.
37.63 Providing two bulb underreemed pile foundation upto maximum 5m depth
including hire charges of machineries digging the pile holes, labour charges
and laying 20mm and down size jelly RCC M 20 keeping the reinforcement
edge cutting etc., complete as per specifications.
37.63.1 23cm dia m 734.00
37.63.2 30cm dia m 1,238.00
37.64 Providing and fixing RCC precast fencing pole of size 0.15m x 0.15m x Each 1,529.00
2.0m casted in CC 1:1.5:3 with 20mm downsize aggregate making holes
for drawing barbed wire at 30cm de using 10 mm dia vertical4 TMT steel rods
and 8mm dia stirrups at 15cm de fixed 1.5m above ground level using steel
moulding, curing, transportation to work spot including excavation in hard soil
fixing in plain cement concrete 1:2:4 using 20mm downsize aggregate including
aligning to plumb and line providing including cost of all materials, labour, hire
charge of machineries lead, lift loading & unloading etc.,Complete.
266
51. No. Description Unit Rate
Rs. Ps.
267
51. No. Description Unit Rate
Rs. Ps.
37.71 Providing stone pitching on slopes using stones of approved size and packing cum 1,088.00
quarry spalls as per drawing including cost of materials, labour, complete
as per specification. MORTH specification No. 2504.
37.72 Providing & constructing granite or trap or basalt size stone dry masonry cum 3,092.00
in foundation using stones hammer dressed in courses not less than 20cm
high including providing & constructing bond stones at every two meters
apart in each courses including cost.
Note: Lift charges for laterite size stone masonry rate as in item No. 5.14 of
this SR.
PIPE CULVERTS
37.73 KSRB M2200-5.9 Design mix M20 with OPC cement @ 320Kgs, with Cum 6,125.00
20mm and down size graded granite metal corse aggregetes @ 0.69 cum
nd fine aggregates @ 0.46 cum , with superplastisiser@ 31ts confirming to
IS9130- 1999 reaffirmed- 2008.
37.74 Solid Slab Super Structure
KSRRB M2300-3.1 Furnishing and Placing Reinforced/Prestressed Cement Cum 6,338.00
concrete in super - stucture as per drawing and Technical Speciafication
completes per Specifications. A. RCC- with OPC cement design mix M25@
340kgs, with 20mm and down size graded granite metal coarse aggregates
@ 0.7 cum and fine aggregates@ 0.47 cum with superplastisiser@ 31ts
confirming to IS9103 -1999 raffirmed- 2008, Case- 1 : Using concrete
mixer MORTH Specification No. 1500, 1600 & 1700.
37.75 KSRRB M2300 - TMT Bar Reinforcement
KSRR M2300 - 14 Supplying, fitting and placing TMT Bar reinforcement tonne 54,465.00
in Super - Structure complete as per drawing and technical specifications
compete as per specification. MORTH Specification No. 1600
268
NEW ITEMS INCLUDED IN 5. R. 2016 - 17
Sl. No. Description Unit Rate
38.61 providing and fixing with internal and external cement fibre boards/ coir composite Sqm 3,316.00
boards to lgsfs dry wall panel system Providing and fixing for both external and
internal faces of Light Gauge Steel Frame Structure in two layers, sandwiching a
breathable vapour barrier in between layers as per NBC code 2009, with external
face having a 6mm thick heavy duty fiber cement board/coir composite board fixed
on a 9mm thick heavy duty fiber cement board/coir composite board confirming to
IS 14862:2000, Category IV type A or equivalent in standard sizes and internal face
with 12.5mm thick gypsum plaster board/coir composite board fixed on 8mm thick
fiber cement board/coir composite boards confirming to IS 14862:2000 of category
Ill type B (High pressure steam cured) or equivalent ,as per standard sizes with self
drilling tapping screws half counter sunk, rib head of 1.60mm to 4mm thick, 8 to 10
gauge, length varying from 25 to 45mm I fasteners @ 600mm c/c of approved make,
with a staggered vertical joint of 2mm to 3mm sealed with a silicon based sealant and
smooth finished using fiber mesh tape and Epoxy and acrylic based joining
compound for seamless finish and the material and process of manufacture and
assembly/erection confirming to RV-TIFAC Composite Designs and Specifications
including all costs of labour, materials, fabrication , assembling, transportation ,
erection, incidental and unforeseen charges complete as per the directions of the
engineer in charge of the work.
38.62 providing and fixing with eps -weld mesh-cement-sand shotcrete wall panels to Sqm 3,241 .00
lgsfs. Providing and fixing in position factory made expanded polystyrene core (EPS
core) panels 90 mm thick having a density not less than 10 kg per cum . to both faces
of LGSFS FOR WALLS and covered on both sides with welded wire fabric mesh
made of 2.2mm dia Gl wire with 50mm pitch in both the directions, connected by
Gl wire of 3mm dia to the LGS frame structure duly plaster finished with short Crete
plastering/ guniting equipment in required layers, 30mm thick with cement mortar 1:3
{1 cement: 3 coarse sand not having more than 40% stone chips of size upto 6mm}
at a pressure not less than 1 bar (1 00 KN/m2) and both faces finished with trowel
and completed in all respect as per drawings and specifications confirming to RV-
TIFAC Composite Designs and Specifications including all costs of labour, materials,
fabrication , assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
38.63 providing and fixing with eps -weld mesh-cement-sand shotcrete roof/floor panels to Sqm 3,387.00
lgsfs Providing and fixing in position factory made expanded polystyrene core (EPS
core) panels 90 mm thick having a density not less than 10 kg per cum. to both faces
of LGSFS FOR ROOF/FLOOR PANELS and covered on both sides with welded
wire fabric mesh made of 2.2mm dia Gl wire with 50mm pitch in both the directions,
connected by Gl wire of 3mm dia to the LGS frame structure duly plaster finished
with short Crete plastering/guniting equipment in required layers, 30mm thick with
cement mortar 1:3 {1 cement: 3 coarse sand not having more than 40% stone chips
of size upto 6mm)} at a pressure not less than 1 bar (1 00 KN/m2) and both faces
finished with trowel and completed in all respect as per drawings and specifications
confirming to RV-TIFAC Composite Designs and Specifications including all costs
of labour, materials, fabrication , assembling, transportation, erection, incidental and
unforeseen charges complete as per the directions of the engineer in charge of the
work.
414
NEW ITEMS INCLUDED IN S. R. 2016 - 17
51. No. Description Unit Rate
38.64 Engineered Coir Composite Flush Door Shutter of 30mm Thick. Sqm 2,030.00
Providing and fixing engineered coir composite flush door shutter manufactured
using infill solid core with coir and wood particle blended with high quality polymer
encased with 28mm thick wooden styles and rails all-round the boundary of the
shutter and veneer laminated with non oven coir felt impregnated with high
temperature cure phenol formaldehyde resin of density 800kg/cum with high quality
adhesive processed at 155 Deg.C , using 650 tonnage hot compression moulding
press and all four sides of the door shutter coated with water resistant coating
and whole process of manufacturing confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per the
directions of the engineer in charge of the work , but excluding the cost of fixtures
and painting.
38.65 engineered wood plastic composite door frames with cross section of 55 x 11 0 mm Rmt 782.00
Providing and fixing engineered wood door frame of requires size fabricated using
Wood Plastic Composites profiles (WPC) of cross section 55 mm X 110 mm with
a density of 1250-1300 kg/m3, resistant to water, termite, fungal and UV, using
four numbers of L shaped MS or plastic clamps at the corners of the frame to fix
it firmly to form a rectangular shape door frame and provided with six numbers of
260mmx25mmx5mm size z shaped MS flat hold fasts for fixing the door frame in the
wall and the material and process for manufacturing the door frame confirming to RV-
TIFAC Composite Designs and Specifications including all costs of labour, materials,
fabrication, assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in
38.66 engineered wood plastic composite door frames with cross section of 75 x 125 mm Rmt 1,367.00
Providing and fixing engineered wood door frame fabricated using Wood Plastic
Composites profiles (WPC) of cross section 75 mm X 125mm with a density of
1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of
L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a
rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm
size z shaped MS flat hold fasts for fixing the door frame in the wall and the material
and process for manufacturing the door frame confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation, erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work , but excluding the cost of
fixtures and painting.
415
NEW ITEMS INCLUDED IN 5. R. 2016 - 17
51. No. Description Unit Rate
38.67 engineered wood plastic composite window frames with cross section of 55 mm x Sqm 4,282.00
110 mm
Providing and fixing engineered wood window frame fabricated using Wood Plastic
Composites profiles (WPC) of cross section 55 mm X 11 Omm with a density of
1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of
L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a
rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm
size z shaped MS flat hold fasts for fixing the window frame in the wall, MS rods of
12mm dia are provided in window frame as per design and drawings. The material
and process for manufacturing the door frame confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation , erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work , but excluding the cost of
fixtures and painting.
38.68 Providing and fixing in position half paneled window shutters with wood plastic Sqm 2,781 .00
composite styles and rails of 30mm thick, 65mm wide and with 4mm thick reeded
glass panels fixed in the groves provided in the styles and rails and the material and
process for manufacturing the window shutters confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation , erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work, but excluding the cost of
fixtures and painting.
38.69 Providing and supplying water proofing membrane of size 1 mX 5 m with 6.4 mm Sqm 1,000.00
thick having a puncture resistance of 620 N as per ASTM D 4833 and hydrostatic
pressure resistance upto 70 m as per ASTM D 5385 consisting of Bentonite granuals
weighing 4.80 kg/sqm encased between needle punched non-oven geotextile
covered with HOPE sheet of 200 microns thick and uncovered oven geotextile on
the other side laid over levelling concrete to arrest subsurface water with a staggered
over lapping of 100 mm and with a minimum staggered lapping of 300 mm at the
corners and the laps secured by washer headed mechanical fasteners spaced at
300 mm c/c and the lap joints are sealed with Bento seal of not lessthan 19 mm thick
and the terminated ends of water proofing membrane is covered with aluminium strip
and Bento seal.,complete including the cost of lapping, materials, labour, complete
as per specifications.
41 .0 Energy Conservation Building Code -- --
416
~~~ee>;! ~.$
~~.~
-
: dr.:l~5..r.>~c::Joir.l~11 ~e:m.il. oote
~
c::5~a:bo 2016-17 ~~c:3 ~c::toircl~eJ~ 1-.Jwa- doc::J~a:b
e.)
c::J.B
:o;;
c::J.B71
:o;;
ct.r.J.
700-00 ( .w~ c:ir.lm d.r.Jc:Jc)Ol)li~) 1i~o3 oirclw~lic::t, c::J~d.:l ~~c:3wd ~d ~d ~'OZ!Fb ~o~ li~ ~~
"' Q Cll ....0
~&;,j-
c:m~o ~£;la:bo~om,
~oc::J~F ~~ ~w~li~ (dote)
....0 e.) ~
z3o1i~m
~;!~
20l6-17c:3~ ~~c:3 o~te c::5~a:bd doc::J~a:b ~o~ ~.Bcmc::t~ ~o:5:m~J~c::5 'OZ!a:bFd~ U'Oc::J~c:;:,.Bn~ ~Q~m
~~ ~d~,m ~~ ro.B71~oo ~oo;Yd c::J..Bc:JtiJii~ ~~1-.Jd ~~<;jm11 ~~~z.J31i~.
~ 0 ~ ~ - M ~ ~
doc::J~cm ~o~ ~.Bcmc::t~ ~o:5:m~J~c::5~. ~~ ~m~~a:b doli~ ~~p wc::5o~n~c::t~ c:J~~ ~c:E~~Jf-Jd
~o:5:mo~m. ~owO"U~~om. ro.B71~om WC)M ~c:J,~o ~~11 ~o~ 1i~c:3J, ~~~z.J~c::ir.lc::5F~~n ~ ~J~e:mno.
-" "' Cll "' ~ ~ e
~&;,f-
c:m~o ~£;lcmo~om.
~oc::J~F ~~ 5w~li~ (dote)
....0 e.) ~
z3on~m
417
INNOVATIVE ITEMS
269
GENERAL NOTES
1. The material component rate indicated in the SR are the prevailing market rates inclusive of taxes, duties,
lead, lift, loading and unloading charges.
2. RATES:
The rates for finished items of works indicated in the Schedule of rates are inclusive of lead, lift, 10% contractor's
profit, 10% over head charges, loading and unloading charges. Extra lead, loading and unloading charges
shall not be added except otherwise mentioned in specific cases.
3. QUALITY:
For ensuring the quality aspect of the materials used by the contractors, it is necessary that the contractor
shall furnish the quality control test certificates for these materials. Department will have the right to get these
materials tested at the cost of contractor.
5. INSPECTION:
The work shall be got inspected by SE I EE QA during execution and after completion and obtain report.
7. COMMENTS I SUGGESTIONS:
Comments, suggestions with reference to the specification, rates and additions if any, may please be
communicated to the following address:
270
51. No. Description Unit Rate
Rs. Ps.
271
51. No. Description Unit Rate
Rs. Ps.
·'
..:.
.•--
·~ ...
272
51. No. Description Unit Rate
Rs. Ps.
273
51. No. Description Unit Rate
Rs. Ps.
274
51. No. Description Unit Rate
Rs. Ps.
• •
7. Primer Coat
A mixture of acrylic monomer ( 1:1) ISOPROOF & water mixed
in proper proportion will be applied on the geotextile membrane.
275
51. No. Description Unit Rate
Rs. Ps.
8. Final Coat
Application of a coat of ISOPROOF shall be applied at right angles
to the primer coat and drying time is about 3 hours. The rate of
completion of ISOPROOF for primer and final coat shall not be less
than 1.25Kg per Sq meter.
276
Sl. No. Description Unit Rate
Rs. Ps.
Methodology:
The surface shall be pre damped with water. The water shall be mixed
powder in the ratio of 3 powder :1water mixing thoroughly with a slow
speed drill fitted at a speed RPM of 282640. The final crystalline slurry
shall be applied with a soft brush bloom at average of 1 kg /sqm area.
Curing shall be minimum of 48 hour by treating the surface by fog spray
3 to 4 time a day. Acrylic I Liquid polymer compound shall be mixed with
water by means of using a slow speed drill mixer 500 RPM and gradually
adding the powder component to the liquid avoiding lump formation and
mixed for 2 to 4 minutes. The slurry shall be applied using stiff brush
in 2 coats that forms 1mm thick. (0.5 mm thick each coat) Curing shall
be minimum of 48 hour by treating the surface by fog spray 3 to 4 time
a day. Protection layer such as plastering or concrete screen shall be
applied on the water proof membrane surface.
38.8 COVING
Providing and laying 12mm thick caving at the junction of slab and Rmtr. 145.00
vertical offsets with CM 1:3 admixed with modified styrene butadiene
rubber emulsion (confirming to BS 6319) specially designed for use as a
bonding aid and gauging liquid for cementations system (5 ltrs for 50kg
cement).
Methodology:
Modified styrene butadiene rubber emulsion shall be added to dry
mix of cement mortar of 1:3 (5 ltrs for 1 bag of cement and 3 bags of
cement) mixed thoroughly by adding water 0.35 water cement ratio and
peddling for 2 minutes.
278
Sl. No. Description Unit Rate
Rs. Ps.
The proposed water stopper shall be used for the following situations:
1. At all the cold construction joints
2. At the junction of Horizontal Raft and vertical retaining walls
3. At the Junction of horizontal Roof slab and vertical Parapet walls
4. At all cold construction joints in Water retaining structures such as
water tanks, swimming pools, water bodies on Podium, roof garden
or Flower beds etc.
5. Around the Pipe penetrations, metal penetrations, any other
penetrations, where there is a joint between two different surfaces
-one of the surfaces being Concrete.
6. Construction joints in the lift Pits
281
Brush ...._. Fill .,_ Tamp .._...., Go
Pour cold mix into the Compact with rammer Immediately allow for traffic
pothole & overfill 1Omm
Usage areas
282
Sl. No. Description Unit Rate
Rs. Ps.
38.15.1.1 For soils having WL between 35 & 50, with 1% of inorganic Compound cum 820.00
like RBI Grade 81 by weight of Soil.
38.15.1.2 For soils having WL more than 50, with 2% of inorganic Compound like cum 1,541.00
RBI Grade 81 by weight of Soil.
38.15.2 RBI GRADE -81 (Gravel soil & Aggregate Mix Material)
Pulverising and mixing 80% Gravel Soil and 20% Aggregates (30mm
nominal size), spreading with rotavator duly adding the specified quantity
of inorganic Compound RBI GRADE-81 as specified by IRC: 37-2012,
mixing thoroughly, sprinkling desired quantity of water, grading with
motor grader and compacting with vibratory roller at OMC to the desired
density for preparing the Base I Sub Base Layer (The Laboratory
CBR of the gravel soil shall not be less that 9%) including cost of all
materials, labour, HOM of Machineries complete as per specification.
38.15.2.1 With 2% inorganic Compound like RBI GRADE 81 by weight of Soil & cum 1,986.00
Aggregate Mix Material :
38.15.2.2 With 3% inorganic Compound like RBI GRADE 81 by weight of Soil & cum 2,710.00
Aggregate Mix Material
38.15.2.3 With 4% inorganic Compound like RBI GRADE 81 by weight of Soil & cum 3,435.00
Aggregate Mix Material
38.15.2.4 With 5% inorganic Compound like RBI GRADE 81 by weight of Soil & cum 4,157.00
Aggregate Mix Material:
38.15.3 RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material)
Pulverising and mixing coarse Aggregates (10mm & down size) and
Fine aggregate (2.36mm & down size) in 1:1 proportion, spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
vibratory roller at OMC to the desired density for preparing the Stabilized
Base I Sub Base Layer including cost of all materials, labour, HOM of
Machineries complete as per specification.
283
51. No. Description Unit Rate
Rs. Ps.
38.15.3.1 With 2% inorganic Compound like RBI GRADE 81 by weight of Coarse cum 3,122.00
& Fine Aggregate Mix Material
38.15.3.2 With 3% inorganic Compound like RBI GRADE 81 by weight of Coarse cum 4,104.00
& Fine Aggregate Mix Material
38.15.3.3 With 4% inorganic Compound like RBI GRADE 81 by weight of Coarse cum 5,068.00
& Fine Aggregate Mix Material
38.15.4.1 With 2% inorganic Compound like RBI GRADE 81 by weight of Milled cum 2,813.00
Material:
38.15.4.2 With 3% inorganic Compound like RBI GRADE 81 by weight of Milled cum 3,777.00
Material :
38.15.4.3 With 4% inorganic Compound like RBI GRADE 81 by weight of Milled cum 4,742.00
Material
38.15.4.4 With 5% inorganic Compound like RBI GRADE 81 by weight of Milled cum 5,707.00
Material:
38.16 Cutting the pothole to regular shape, trimming to provide firm vertical cum 2,903.00
faces, removing all loose materials, cleaning of surface, filling with a
mix of aggregates (40mm downsize) & local soil (except BC Soil) in
1:1 proportion duly adding 2% of Inorganic compound RBI Grade 81,
mixing thoroughly, compacting & finishing etc., complete in WBM layers
for Pothole/Patch repairs.
Methodology and Construction :
Stabilization using RBI Grade 81 (the process of improving the
engineering properties of a material by means of the addition of RBI
Grade 81) is subject to the quality of materials available and the impact
of the environment (traffic, climate, etc.) on the structural design.
Stabilization with RBI Grade 81 endeavors to increase the quality of
the project and reduce construction costs by improving the properties
of substandard, readily available material to comply with the relevant
specifications.
1. Materials
Soil or Gravel
Stabilizer agent, RBI Grade 81
Should be kept under cover and protected from moisture from the time
of purchase to the time of use. If material has been left exposed to
environmental elements, consult a RBI Grade 81 representative.
284
Sl. No. Description Unit Rate
Rs. Ps.
286
Sl. No. Description Unit Rate
Rs. Ps.
8. Watering
i) Immediately after RBI Grade 81 has been properly mixed into the
layer, the predetermined moisture content should be administered .
ii) Each application or increment of water should be well mixed with
the material so as to avoid concentration of water near the surface
or in pockets within the layer.
iii) Particular care should be taken to ensure satisfactory moisture
distribution over the full depth, width and length of the section
being stabilized and to prevent any portion of the work from getting
excessively wet after the stabilizing agent has been added. The
moisture content of the material and stabilizing agent should be
the optimum moisture content (OMC) calculated at maximum dry
density (Mod AASHTO density).
iv) If any portion of the work becomes too wet after the stabilizing agent
has been added and before the mixture has been compacted, as
during rain or downpour, the application shall be rejected. These
portions should be allowed to dry out to the required moisture
content and then be scarified , re-stabilized, re-compacted and
finished off.
v) The water supply and watering equipment should be adequate
to ensure that all the water required is added and mixed with
the material being treated within the prescribed period to enable
compaction and finishing to be completed.
Ensure that the moisture content in the mixture is not below the OMC or
more than 2 % above the OMC and less than the quantity that causes
the road bed to become unstable during compaction and finishing. If
any portion of the work becomes too wet after the stabilising agent has
been added and before the mixture has been compacted, as during rain
or downpour the application shall be rejected. These portions should be
allowed to dry out to the required moisture content and then be scarified,
re-stabilised , re-compacted and finish the layer.
287
Scarifying Placement of RBI Grade 81 Bags
Step 1 Step 2
Step 3 Step 4
Step 5 Step 6
288
Step 7
Step 9
289
Sl. No. Description Unit Rate
Rs. Ps.
STANDARDS
Minimum Crushing Strength 35 Kg/Sqcm.
U- Value 1.1 W/SqmK.
Density 695 Kg /Cum.
Water absorption <20 %.
Reduces the energy consumption and hence help to maintain
comfortable temperature inside.
Natural & Green Building Product.
*Ref: -IS 3952 Guidelines for use of horizontally perforated clay bricks.
Construction Methodology
* All concrete surfaces of beams and columns coming in contact with
brick work is to be hacked.
* Pre wet the bricks before construction.
* Use cement mortar slurry of 1:2 on the hacked surface to create a
roughened surface for proper bonding.
* Use silt free (less than 5%) sieved clean sand for mortar.
* Place the marker course of brick (1st course) after checking the
vertical & horizontal alignment. And also mark the vertical course up
to beam bottom on the column to maintain the equal mortar joints.
* Mix mortar in proportion of 1:6 for 200 & 150 mm thick walls and
1:4 for 100 mm thick walls using Farma box (Equal to 1 cement bag)
for measuring sand and a measuring can to standardize quantum
of water to get a consistent mix. Mix well for uniformity. Mix mortar
in small manageable quantities and use it within ~ an hour.
290
Sl. No. Description Unit Rate
Rs. Ps.
38.20.1 - do - with unreinforced M40 grade pavement quality concrete using cum 7,443.00
43 grade OPC @ 420 kg/cum, coarse aggregate, fine aggregate and
Admixture confirming to IS 9130-1999 (R-2004)
38.20.2 - do - with un-reinforced M-40 grade Pavement Quality Concrete cum 6,977.00
(PQC) using 53 grade OPC at 315 kg/cum and cementitious material
Ground Granulated Blast furnace slag at 105 kg/cum , satisfying
IS: 12089-1987(R2004) coarse aggregate fine aggregate, admixture
conforming to IS:9103-1999 (R2008)
38.20.3 -do- with un-reinforced M-40 grade Pavement Quality Concrete (PQC) cum 6,900.00
using 53 grade OPC at 357 kg/cum and cementitious material FlyAsh,
at 63 kg/cum, satisfying IS:3812-2013(Part-1) coarse aggregate fine
aggregate, Admixture conforming to IS:91 03-1999(R2008)
Note : If slip form paver with sensor is used, additional rate of
Rs. 100.00 per cum to be given for item Nos. 38.20.1, 38.20.2
and 38.20.3
38.21 Providing groove cutting for width of4mm- 6mm and 1/3rd depth of m 100.00
PQC Whitetopping within 8-10 hrs of placing/finishing of PQC including
cost of cutting machine, generators, HOM of machinery, blades, coolant
etc. , including cleaning of groove and providing sand and hot bituminous
or equivalent approved sealant filling etc. , including cost of conveyance
of all materials, labour, lead and lift charges and all other incidental
charges as per drawing and as per specifications.
292
51. No. Description Unit Rate
Rs. Ps.
293
Sl. No. Description Unit Rate
Rs. Ps.
38.22 Use of GEO Textiles I GEO fabrics in road pavements and m 90.00
sub-surface drainage works.
Providing and Inserting Prefabricated Vertical Drain, core with synthetic
material and wrapped with Non-woven geotextile 120GSM in very soft
clay for quick consolidation.
Ref: IRC SP 59: GUIDELINES FOR USE OF GEO TEXTILES IN ROAD
PAVEMENTS AND ASSOCIATED WORKS- 2002
Technical Data;
-do- with 1OOmm width ,thickness = 4mm ,mass per linear meter
90g/m,with tensile strength =2.0 KN
-do -with 1OOmm width,thickness =5.2 mm,mass per linear meter
110g/m,with tensile strength= 2.4 KN
Application Methodology;
Vertical drains may be installed employing either vibratory or static
methods. In either case, the drain is enclosed in a tubular steel mandrel
of small cross-sectional area usually 50x125mm. A small steel anchor
plate is attached to the drain at the bottom of the mandrel. The mandrel
is then driven in to the soil either with a static or vibratory rig. When the
design depth is reached, the mandrel is extracted. The anchor plate
retains the drain in the soil. When the mandrel is fully extracted the
drain is cut off a new anchor plate is installed and the process begins
again. These are used in Land reclamation projects, Construction of
highways ,railways ,airfields and dykes, Ports and harbor construction,
Development of industrial sites ,Mitigation of liquefaction,etc ..
38.23 Providing and Laying Needle punched and mechanically bonded
Non-woven Geotextile indigenously manufactured from high quality
synthetic fibres on the prepared subgrade for separator cum filtration
cum drainage application with necessary overlaps as per drawing.
Technical Data :
-do-with GSM 150, 1.3mm thickness,Grabtensile strength 540N, Puncture
strength 315N,Trapezoidal tear 230N,Apparent opening size 180 iJm,
-do- 200Gsm, 1.6 mm thickness,Grabtensile strength 720N,Puncture
strength 400N,Trapezoidal tear 300N,Apparent opening size 150iJm
-do-250Gsm, 1.8 mm thickness, Grabtensile strength 865N,Puncture
strength 525N,Trapezoidal tear 360N,Apparent opening size 150iJm
-do-300Gsm, 1.9 mm thickness, Grabtensile strength 101 ON,Puncture
strength 650N,Trapezoidal tear 415N, Apparent opening size 120iJm
-do-400GSM,2.5 mm thickness, Grabtensile strength1325N,Puncture
strength 785N,Trapezoidal tear 51 ON , Apparent opening size 106iJm
-do-500GSM,2.9 mm thickness, Grabtensile strength1570N,Puncture
strength 910N,Trapezoidal tear 600N, Apparent opening size 90iJm
-600GSM,3.4 mm thickness, Grabtensile strength1980KN,Puncture
strength 1080N, Trapezoidal tear 705N, Apparent opening size =70iJm
Application Methodology;
These contribute to road structure strength by providing separation
between the base course aggregate and underlaying, weaker soils,
maintaining the structural integrity of the structure and avoiding
the intermixing of the different layers. It also acts as filter around
aggregate drains,it also allows water to flow into the drainage system
while minimizing the passage of fine soil particle that could diminish
drainage capacity. These used in application like Retaining Wall and
Steep sided embankments, Embankment on soft ground, Shallow
foundations, Railway tracks, Confinement ponds, reservoirs and canals.
38.24.1 _do_ copper and synthetic rope gabion of size 1mx1 mx1 m, aperture Box 1,300.00
1OOmm x 1OOmm
38.24.2 _do_ copper and synthetic rope gabion of size 1mx1 mx2m, aperture Box 2,400.00
1OOmm x 1OOmm
38.24.3 _do_ copper and synthetic rope gabion of size 1mx1 mx3m, aperture Box 3,600.00
1OOmm x 1OOmm
295
51. No. Description Unit Rate
Rs. Ps.
Technical Data;
do - size 1M x1 M x 1M, aperture 150mm x 150mm, Tensile strenth
9500Kg/m, Punching shear strenth 5200Kg
-do - size 1M x1 M x 2M, aperture 1OOmm x 1OOmm , Tensile strenth
14000Kg/m, Punching shear strenth 6200Kg
-do-size 1M x1 M x 3M, aperture 1OOmm x 1OOmm, Tensile strenth
14000Kg/m, Punching shear strenth 6200Kg,
Application Methodology;
Copper and polymer Gabions are rectangular or cylindrical baskets
fabricated from polymer meshes and usually filled with stone and
used for structural purposes such as retaining walls,revetments,slope
protection,and similar applications. These are fabricated from ropes of
suitable diameter into a box like form with required size and apertures.
These are used in application like River bank protection, revetment,
toe-walls,aprons,groynes,spurs,channel linings, sea shore protection,
seawalls, Anti-erosion structures,etc.
38.25 Providing and Synthetic Biaxial Geogrid indigenously manufactured
from selected high tenacity synthetic yarn with high molecular weight
(> 25000 g/mol), and low carboxyl end group (<30mmol/kg) for soil
reinforcement application for stabilisation , requirement of geogrid
strength in both direction with granular fill.
Technical Data;
-do- ultimate tensile strenth 30Kn/m in MD and CMD, Tensile strenth
at 2% elongation 6Kn/m in MD and 6Kn/m in CD, aperture size in MD
and CD 26X26mm.
-do- ultimate tensile strenth 40Kn/m in MD and CMD, Tensile strenth at
2% elongation 7.5Kn/m in MD and 7.5Kn/m in CD, aperture size in MD
and CD 25X25mm
-do- ultimate tensile strenth 60Kn/m in MD and CMD, Tensile strenth at
2% elongation 9Kn/m in MD and 7.5Kn/m in CD, aperture size in MD
and CD 25X25mm
296
51. No. Description Unit Rate
Rs. Ps.
Application Methodology;
Biaxial geogrids are designed for applications where strength requirement
is in both directions. They are used in reinforcement of granular road base
and subbase, area stabilization, trackbed stabilization, load transfer
platforms,etc.
38.26 Providing and Synthetic Uniaxial Geogrid, indigenously manufactured
from selected high tenacity synthetic yarn with high molecular weight
(> 25000 g/mol), and low carboxyl end group (<30m mol/kg) for reinforced
soil wall and slope application with granular fill as per design prepared
by technology provider of reinforced earth wall and slope.
38.26.4 _do_ with 100 Kn/m Ultimate Tensile Strength Sqm 180.00
38.26.5 _do_ with 120 Kn/m Ultimate Tensile Strength Sqm 205.00
38.26.6 _do_ with 150 Kn/m Ultimate Tensile Strength Sqm 230.00
38.26.7 _do_ with 200 Kn/m Ultimate Tensile Strength Sqm 290.00
38.26.8 _do_ with 250 Kn/m Ultimate Tensile Strength Sqm 330.00
Technical Data:
-do- with ultimate tensile strenth 40Kn/m in MD and 20Kn/m in CD,
aperture size in MD and CD 30X25mm,
-do- with ultimate tensile strenth 60Kn/m in MD and 20Kn/m in CMD,
aperture size in MD and CD 30X25mm,
-do-with ultimate tensile strenth 80Kn/m in MD and 30Kn/m in CMD,
aperture size in MD and CD 30X25mm ,
-do- with ultimate tensile strenth 1OOKn/m in MD and 30Kn/m in CMD,
aperture size in MD and CD 30X23mm ,
297
Sl. No. Description Unit Rate
Rs. Ps.
Application Methodology:
Uniaxial geogrids are available in a range of tensile strength and are
suitable for applications, which require strength in one direction, these
are used in reinforced soil walls,steep slopes and basal reinforcement
of embankments, veneer reinforcement,etc ..
298
Sl. No. Description Unit Rate
Rs. Ps.
Application Methodology:
Paving fabric is a strong layer of fabric is applied under asphalt to
minimize surface water infiltration and prevent existing cracks in the road
from surfacing to enhance the performance of pavement. The Barrier
function refers to the prevention of fluid movement across the plane of
the geotextile. A nonwoven geotextile provides a barrier function when
saturated with an impermeable material, like bitumen. It Retards the
propagation of cracks, Reduced the required design overlay thickness,
Extends the life of the overlay and the pavement section,These can be
used as asphalt over lay on flexible pavement a nd rigid pavement -a
layer of DBM/BC should be provided on rigid pavement before laying
the paving fabric.
38.28 Providing and construction of steel wire mesh Gabion retaining wall for
retain ing walls with Mechanically woven double twisted, mechanically
selvedge, Zinc+ PVC coated Gabion of mesh type 1Ox12, wire dia
2.7/3.7mm (inner/outer diameter), Selvedge wire dia 3.4/4.4mm as per
standards (EN/IS 16014) with diapragms (partitions), in every 1M for
Gabions of length higher then 1.5M as per standards, from manufacturers
of proven experience in similar technology, including filling of rubble of
size 150mm to 250mm at site including packing compactness to Iins and
levels in the exposed face of masonry, in dry condition, simultaneously
during the course as per construction guidelines by the department/
installtion guidelines of manufacturer, including all lead, lift and labour
etc. complete. (In case of under water installation, the approrite provision
for crane, extra labour etc., need to be taken extra).
299
51. No. Description Unit Rate
Rs. Ps.
Application Methodology:
Metal Gabion is comprised double twisted hexagonally woven steel wire
mesh with zinc galvanized and PVC coated compartmented baskets with
a rectangular box shape. The compartments are of equal dimension and
are formed by internal diaphragms. The compartment is filled with natural
stone at the site of use, to form flexible, permeable, monolithic structures
for earth retension and the diaphragms assure minimum stone migration
within the basket. Thus providing even distribution of the stone even in
abnormal conditions,and adding strength to the container to help retain its
rectangular shape during the filling operation,depending on the application
and requirement,these gabions can be manufactured in different size
i.e.length and width with diaphragm mat every 1.0 m length.These are used
in application like Earth control and soil conservation,Retaining structures/
walls, Rock wall protection netting,Protection ofhighways/Railways,Barriers
at the river,Bridges and culvert protection,Marine and sea wall
protection,Lining of steep slopes or slopes protection,Revetments for
lakes and sea shores ,Lining of canals and dams,etc.
300
Trapezoidal Profile· I
TILE PROFILE
1000
Crvst
Product Sheet Widlh Effective Widlh CrutDepth Distance
Tile Profile 1090mm 1000mm 27mm 200mm
Technical Specifications
~":!lainted Galvamzf!11 St!!ul P[e·painted Galva!yrne 1j3are Galvalume Steel
Thlc.Mess (Ten 0.30 mm - o.ao mm Tllld<nass (Ten 0.30 mm • 0.80 mm
Metallic Coaliflg Zlnc.IWmnlum Alloy Coahng AZM150
Mclalllc Coabng Z 120 (101.11 on bolh sides)
Higher or lower CoaHng optional.
Hi!)her or lov1er coaling cpbonal.
Tensile Strength 550MPa.
Tensile Strongtll 340-550~
PatntCoaUng RMPISMP
PalnlCoaUng RMP/SM?
Paint Thickness 18.22 micron on Top &
PaUl! Thckness 18 - 22 micrc~n co Top &
5 • 81Ticron primer on oonom
5 • Bmicron primer on bo1tom Thickness Tolerance • Asper lSI
Thid!ltess Tolerance Asper lSI Slarxfard followed I$277,ASTM1397 / A755 /A192,JISG332113322
Slarn!ard lollo'lled IS142,Sim JISG3312 Combi~tlm 55% /IJ, 43.4% Zn & 1.5 • 1.6% Sl.
_i
301
Sl. No. Description Unit Rate
Rs. Ps.
epoxy primer on both side of the sheet and polyester top coat 20-22
microns using self drilling/self tapping screws of 25 mm length, to be
fixed over the existing purlins, rafters, channels and trusses.
38.31 Providing and installing of approved make pre painted Galvalume iron Sqm 740.00
Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim,
etc The total coated thickness (TCT) of the sheet shall be 0.47 mm
+/- 0.02 tolerance mm Zinc-Aiu Alloy coating AZ 150 gsm as per ASTM
1397/755 -550 mpa steel grade, 5-7 microns epoxy primer on both side
of the sheet and polyester top coat 20-22 microns using self drilling I
self tapping screws of 25 mm length. (width upto 500-600 mm only),
to be fixed over the existing purlins, rafters, channels and trusses.
302
51. No. Description Unit Rate
Rs. Ps.
WORK PROCEDURE
Step No. 1: SURFACE PREPARATION.
The Stone surface to be prepared by removing all loose particles & dust. The
surface to be made free from the above said contaminations by wire brushing
with non-metallic brushes, followed by dusting off with Electric blower after the
installation of modular steel Scaffolding.
Guarantee:
Should assure that treatment will never give rise to formation of yellow
stains & neither erodes stone or pointing for life time which is normal with
either acid washing or using unproven and un-stabilised inferior acid based
stone cleaning formulations. The treatment should also not give rise to dust
303
51. No. Description Unit Rate
Rs. Ps.
304
51. No. Description Unit Rate
Rs. Ps.
provision to slide the Shutter I sash frame and facilitates with a water
drain outlet component made of PVC. The Shutter frame should be fitted
with Smm thick plain float glass of reputed make and fixed with EPDM
weathering seal resistant accessories and handle made of Alumimium
1 No. per each shutter. The sections are to be cut to length miter joined
with corner brackets. The total window system is to be installed at the
site using anchor fasteners, Silicon sealant applied at the Outer Frame
Corners. The cost is inclusive of conveyance of all materials accessories,
labour charges, and erection at site with complete finished item of work.
38.34.1 Window with Two Sliding Shutters and with Grill Outer Frame Size Sqm 5,784.00
90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of 1Omm
MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to
12mm x 6 mm MS flat.
38.35 SLIDING WINDOWS (3 Shutters) or Equivalent Sliding Windows
(Suitable for residential and non-residential buildings):
Providing and fixing of Sliding Windows made of Galvanized Steel (Base
Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120
GSM). The factory made section should be powder coated with pure
polyester powder upto 50-60 microns thick with total coated thickness of
0.8 mm for Outer Frame and 0.58mm thickness for Sliding Shutter Section.
The Outer Frame size for Two Tracks with Grill provision is 135mm x
50mm. The Window Shutter section is of 58 mm x 36 mm. The Outer
Frame should have Two integrated Guide tracks of 12mm width and 24mm
deep for provision to slide the Shutter I sash frame and facilitates with a
water drain outlet component made of PVC. The Shutter frame should be
fitted with 5mm thick plain float glass of reputed make and fixed with EPDM
weathering seal resistant accessories and handle made of Alumimium 1
No. per each shutter. The sections are to be cut to length miter joined with
corner brackets. The total window system is to be installed at the site using
anchor fasteners, Silicon sealant applied at the Outer Frame Corners. The
cost is inclusive of conveyance of all materials accessories, labour charges,
and erection at site with complete finished item of work.
38.35.1 i) Center Shutter Fixed: center shutter frame made of section with size Sqm 6,383.00
36mm x 58mm should be fitted with 5mm thick plain float glass of reputed
make, EPDM gasket all around the glass and fixed to the Outer Frame
with the supporting section of size 29mm x 20mm of 0.58mm thick fixed
horizontally on top and bottom of the shutter frame
38.35.2 ii) Center Shutter Sliding: center shutter frame made of section of Sqm 6,461.00
size36mm x 58mm should be fitted with 5 mm thick plain float glass
of reputed make. The supporting guide section of size 15mm x 19mm
of 0.58mm thick fixed horizontally at top and bottom of shutter frame
and slides along the bottom and top guide tracks made of sections size
24mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick.
38.36 Steel Windows with grill and flymesh for residential buildings
Providing and fixing of windows made of pre-painted steel (base steel as
per IS 513 of 0.58mm tick galvanized as per IS 277 with zinc of 120GSM).
Primer coated with epoxy primer of 5-7 microns thick, finishpainted with
305
Sl. No. Description Unit Rate
Rs. Ps.
a polyester paint of 12-16 microns thick and back coatedwith 5-7 microns
thick alkyd backer. Section for outer frame should beof 72x55mm, centre
mullion should be of 72x50mm, section of the fixed glass beading should
be of 12x12mm. and section of the shutter should be of 48x25mm. Outer
frame and mullion sections to have rebate forglazed shutters, fly mesh
and 20mm provision for guard bars/grill flymesh shutters section should
be of 20x40mm. The sections are to becut to length mitre joined with
corner bracket. Centre mullion is to befixed with mullion cap. Handle
latch 2 Nos of heavy duty stainless steelpivot hinges shall be provided
for shutter. The window should be Iedwith 50mm thick plain float glass
and S.S. Mesh for fly mesh shutter(304 grade). Rubber gaskets are to
be provided all around the glass. The above frames should be fixed to
the concrete/masonry wall bymeans of self-expanding screws, including
1Omm square guard barswith 6" (152.4mm) pitch complete for finished
item of work.
38.36.1 Double shutter window with vertical mullion 3'0"x4'0" (914.4mm Sqm 7,272.00
x1219.2mm) outer frame section size of 72x50mm shutter frame section
size of 48x25mm mullion section size of 72x50mm.
38.36.2 Centre fixed both side openable shutter window 5'0"x4'0" (1524mm x Sqm 7,023.00
1219.2mm). Outer frame section size of 72x50mm. Shutter frame section
size of 48x25mm mullion section size of 72x50mm. Fixed beading section
size of 12x12mm.
38.37 Steel Windows with grill for residential buildings
Providing and fixing of windows made of pre-painted steel (base steel
as per IS 513 of 0.58mm tick galvanized as per IS 277 with zinc of 120
GSM). Primer coated with epoxy primer of 5-7 microns thick, finish
painted with a polyester paint of 12-16 microns thick and back coated
with 5-?microns thick alkyd backer. Section for outer frame should be
of 48x50mm, centre mullion should be of 48x50mm, section for shutter
should be of 48x25mm and fixed glass beading section should be of
12x12mm. Outer frame and mullions to have rebate for glazed shutter
and a 20mm provision for guard bars/grills. The sections are to be cut
to length mitre joined with corner bracket. Centre mullion is to be fixed
with mullion cap. Handle stay 2Nos of stainless steel heavy duty pivot
hinges shall be provided for shutter. The window should be panelled with
5mm thick plain float glass. Rubber gaskets are to be provided all around
the glass. The above frames should be fixed to the concrete/ masonry
wall by means of self expanding screws, including 1Omm square guard
bars with 6" (152.4mm) pitch etc. , complete for finished item of work.
38.37.1 Double shutterwindowwith vertical mullion 3'0"x4'0" (914.4mmx1219.2mm) Sqm 4,210.00
outer frame section size of 48x50mm shutter frame section size of
48x25mm mullion section size of 48x50mm .
38.37.2 Centre fixed both side openable shutter window 6'0"x4'0" (1828.8mmx Sqm 4,595.00
1219.2mm). Outer frame section size of48x50mm shutter frame section
size of 48x25mm mullion section size of 48x50mm. Fixed beading section
size of 12x12mm.
306
51. No. Description Unit Rate
Rs. Ps.
307
51. No. Description Unit Rate
Rs. Ps.
38.40 Providing road humps for the entire formation width, using bituminous
premix materials and heavy duty cobble stones 60 mm thick, having
road hump dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular
sections and ramp on either side of road hump of 0.85 mtr (wide),
including providing WBM (2 layers) for shoulder portion 1.7mts in
length on either side, completing with road marking paint with applied
thermoplastic compound with reflecting glass beeds on bituminous
surface and providing 2 Nos. retro reflective traffic signs as per IRC SP
67 -2010 (for details refer IRC 99-1988)
38.40.1 for single lane for formation width of 7.50 mtrs. and using BC mix material Unit 30,283.00
38.40.2 Intermediate lane for formation width of 9.00 mtrs using BC mix material Unit 33,566.00
38.39.3 lane for formation width of 12 mtrs. using BC mix material Unit 43,083.00
38.41 Providing , laying , rumble strips, 250 mm wide and 25mm height in
rectangular shape at 1.00 mtr center to center for the entire formation
width of road using pre mix bituminous material, including providing
WBM (2 layers) for shoulder portions, applying tack coat, providing
2 Nos. retro reflective traffic signs as per IRC SP 67-201 0 (for details
IRC 99-1988)
38.41 .1 For 3 nos- including WBM layers for length of 2 mtrs on either side
of carriage way in shouldr portion.
38.41.1 .1 Single lane using SDBC mix material. Unit 15,257.00
38.41.1.21ntermediate lane using SDBC mix material. Unit 14,917.00
38.41 .1.32 lane using SDBC mix material. Unit 18,443.00
38.41.2 For 5 nos- including WBM layers for length of 4 mtrs on either side
of carriage way in shouldr portion.
38.41.2.1 Single lane using SDBC mix material. Unit 21,124.00
38.41 .2.21ntermediate lane using SDBC mix material. Unit 20,535.00
38.41 .2.32 lane using SDBC mix material. Unit 26,385.00
38.41.3 For 10 nos - including WBM layers for length of 9mtrs on either
side of carriage way in shouldr portion.
38.41.3.1 Single lane using SDBC mix material. Unit 35,723.00
38.41 .3.21ntermediate lane using SDBC mix material. Unit 34,543.00
38.41.3.32 lane using SDBC mix material. Unit 46,243.00
38.41.4 For 15 nos - including WBM layers for length of 15 mtrs on either
side of carriage way in shouldr portion.
38.41.4.1 Single lane using SDBC mix material Unit 50,301.00
38.41.4.21ntermediate lane using SDBC mix material. Unit 48,524.00
38.41.4.32 lane using SDBC mix material. Unit 66,072.00
38.42 Providing and laying Geocells ultrasonically welded 1.30mm thick,
HOPE strips, expandable to form GEOCELLS of honeycomb structure,
anchoring to metal pegs at each and cell to be laid on prepared surface.
38.42.1 - do - 1OOmm height Sqm 370.00
38.42.2 - do - 150mm height Sqm 480.00
308
51. No. Description Unit Rate
Rs. Ps.
38.43 Providing, fabricating and fixing profiled poly erethane insulated roof Sqm 2,250.00
of 1,06m width and 7,60m length sheets roof having external sheet of
0.5mm steel with powder coated finish, bottom sheet of 0.4mm steel
with powder coated finish. The roofing system shall have water proof
over lapping arrangement at the inter section of two sheets the fasting
shall be of self tapping screws dia 6.3mm or required length with PVC
head along with washer pre-painted aluminium cap unit with build in seal
arrangements. The entire roof shall be firmly fasteed to the existing frame.
glass shall be of size 20x18mm and coextruded with gasket. Fiber Glass
mesh shall be provided in mesh shutter. Windows shall be provided with
5 mm plain float glass, standard hardware and single point locking system
of flush lock. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.
38.44 .6 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out Sqm. 6,000.00
of multi chambered uPVC sections with TPV gaskets having isolated
drainage and reinforced with Galvanized Iron profiles through out the
window. The sliding outer frame having a overall size of 60x45 mm with
reinforcement of 1 mm thickness , super sas with overall size of 39x75
mm with reinforcement of 1 .5mm thickness. Glazing bead for fixing of
glass shall be of size 20x18 mm and coestruded with gasket. Fiber
Glass mesh shall be provided in mesh shutter. Window/Door shall be
provided with 6 mm plain float glass, stgandard hardware & multi point
locking system of patio espagnolette. Wall thickness of frame , mullion
& sash shall be 2-2.2 mm.
38.44.7 Providing & fixing of glazed 3 Track- 2 Panel Sliding Door With Mesh ... Sqm. 7,000.00
made out of multi chambered uPVC sections with TPV gaskets having
isolated drainage and reinforced with Galvanized Iron profiles through
out the window. The sliding outer frame having a overall size of 108x45
mm with reinforcement of 1 mm thickness, super sash with overall size
of 39x75 mm with reinforcement of 1.5 mm thickness, mesh sash of
overall size 30x48.5 mm reinforced with 1.5 mm of GI.Giazing bead for
fixing of glas shall be of size 20x18mm and coextruded with gasket. Fiber
Glass mesh shall be provided in mesh shutter. Window/Door shall be
provided with 6 mm plain float glass, standard hardware & multi point
locking system of Patio espagnolette. Wall thickness of frame, mullion
& sash shall be 2-2 .2 mm.
38.45 Consultancy Services for Preparation of Land PlanSurvey for State
Highways and Major District Roads
The entire Land Survey Plan should be carried out using LiDAR KM 36,000.00
Technology only, Collection of all the relevant information for 50 Mtr on
either side from
The entire Land Survey Plan should be carried out using LiDAR
Technology only, Collection of all the relevant information for 50 Mtr on
either side from centre of the road, Details of Structures (if any), Cross
Drainage Structures, Arboriculture counts and other Assets, which
have been developed as a part of the road furniture I development.
Establishing the Primary Control Points (Horizontal Control), using the
DGPS at every 1000 meters interval and secondary control points at
every 500 meters and also at important and salient locations, such as
major inter sections, Village I Town limits etc.,. The DGPS controls will
be so established that it meets the minimum criteria specified for carrying
out the mapping activities on a scale of 1:5000 or 1:10000. (Inclusive of all
taxes) (Read also note provided @ the end of this chapter)
38.46 Providing and fixing self-supported, ribbed, high quality, high grade (D:350
MPA Yst Min ), pre- painted Galvalume steel roof sheet, coated with bare
Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip
process , of total coated thickness as specified for different spans with a
tolerance of+/- 0.02 mm , according to technical specification confirming
to A 792, with NCCA 11-1, or ECCA T4 Pencil hardness HB, NCCA
standard T-Bend test. The roof should be fastened to the gutter beam,
on the external sloping side, at an interval of 51 mm Centre to Centre,
310
Sl. No. Description Unit Rate
Rs. Ps.
38.48.4 Loosening of the ground upto a level of 500mm below the subgrade cum 708.00
level, watered, graded and compacted in layers to meet requirement of
table 300-2 for subgrade construction complete as per specifications.
Case-1 : Compacting original ground supporting subgrade using chemical
stabilizer like nanotechnology based organosilane or equivalent
(confirming to the required spec.) mixed in water@ 0.5kg/cum and 1%
cement by weight of soil, (which includes water charges & compaction
by vibratory roller) MORTH Specification No. 305.3.4
38.48.5 Loosening , levelling and compacting original ground supporting cum 685.00
embankment to facilitate placement of first layer of embankment,
scarified to a depth of 150mm, mixed with water at OMC and then
compacted by rolling so as to achieve minimum dry density as given in
table 300-2 for embankment construction. Compete as per specifications.
Case - II : Compacting original ground supporting embankment using
chemical stabilizer like nanotechnology based organosilane or equivalent
(confirming to the required spec.) mixed in water @0.5kg/cum and 1%
cement by weight of soil (which includes watering charges & compaction
by vibratory roller) MORTH Specification No. 305.3.4
38.49 METALLIC DOOR FRAMES
38.49.1 Door Frame - Entrance
Providing & fixing factory made Galvanized plain steel door frame of rmt. 610.00
profile size 125 x 60 mm single rebate manufactured from galvanized
plain steel sheet 1.25 mm thick, conforming to IS:277. The door frame
consists of hinge jamb, lock jamb, head & bottom tie bars, supply in
knockdown condition & to be assembled at site by mechanical means
with special mitre joint. The bottom tie bar made out of galvanized plain
steel sheet 1.60 mm thick pressed angle 20 x 20 mm screwed to the
door frame. The stiffeners of 3 mm thick pre- punched & pre-trapped
are to be welded inside the pre-punched slots of the door frames &
4 nos. of S.S. butt hinges 100 x 59 x 2.5 mm to be screwed to the door
frame . The necessary stiffeners & mortar guards to be provided for
fixing hardware fixtures. The door frame to be powder coated after pre-
treatment of the surface. The door frame shall be filled with 1:3:6 cement
concrete & to be fixed with adjustable lugs/ hold fasts. Alternatively, dry
fixing shall be permitted by using metallic expansion bolt. The rate is
including transportation, loading, unloading, HOM etc. but excluding the
hardware fixtures. Size 1000 x 2130 mm
38.49.2 Door Frame- Internal
Providing & fixing factory made Galvanized plain steel door frame of rmt. 480.00
profile size 125 x 60 mm single rebate manufactured from galvanized
plain steel sheet 1.25 mm thick, conforming to IS: 277. The door frame
consists of hinge jamb, lock jamb, head & bottom tie bars, supply in
knockdown condition & to be assembled on site by mechanical means
with the special miter joint. The bottom tie bar made out of galvanized
plain steel sheet 1.60 mm thick pressed angle 20 x 20 mm to be screwed
to the door frame. The 4 nos. of G.l. Lift off hinge 100 x 67 x 2 mm to be
projected welded to the door frame. The necessary stiffeners & mortar
guards to be provided for fixing hardware fixtures. The door frame to be
powder coated after pre-treatment of the surface. The door frame shall be
filled with 1:3:6 cement concrete & to be fixed with adjustable lugs/ hold
fasts. Alternatively, dry fixing shall be permitted by using metallic expansion
bolt. The rate is including transportation, loading, unloading, HOM etc. but
excluding the hardware fixtures. Size 900 x 2130 mm
313
Sl. No. Description Unit Rate
Rs. Ps.
filled in the hollow portion of door shutters for structure rigidly & sound
insulation. The necessary stiffeners of Galvanized plain steel sheet of
minimum thickness 1.60 mm to be provided for all hardware fixtures.
The rate is including transportation, loading, unloading, HOM etc. but
excluding the hardware fixtures. Size- 670 x 2045 x 32 mm thick.
38.51 Providing and laying- Pervious concrete of grade M15 as per specification cum 5,500.00
using paver and roller where ever necessary complete. This includes the
cost of all material, Labour, HOM of machinery, Laying, Compacting, Curing
etc. as per the instruction of Engineer in charge of the work.
38.52 ProvidingStainlesssteelreinforcement(DuplexGrade-532101)forRCCwork Tonne 2,10,677.00
including straightening, cutting, bending, hooking, placing in position, lapping
and I or welding wherever required, tying with binding wire and anchoring
to the adjoining members wherever necessary complete as per design
(laps, hooks and wastage shall not be measured and paid) cost of
materials, labour, HOM of machinery complete as per specifications.
38.53 Providing and mixing Alkali resistant integral glass fibers HD 67/36 to cum 3,480.00
act as a replacement of steel reinforcement in supported slabs and to
provide secondary reinforcement in concrete at 5 kg I cum of concrete,
fibers of length 36 mm, diameter 19 microns,specific gravity 2.68,
modulus of elasticity 72 Gpa and having the aspect ratio (length/dia)
of 67, including cost of labour,materials and HOM of machineries etc
complete.(Note:The work to be carried out with prior permission of the
competent authourity.) (NOTE: Rate is for cum of concrete)
38.54 Providing and applying 2 coats of corrosion Inhibition cement slurry on Tonne 1,871.00
Reinforcement bars prepared by mixing of 1 Kg of OPC Cement with
500 CC of Inhibitor solution of approved quality by dipping or brushing
method,the first coat being applied after cleaning the bars by wire brush
or alkaline cleaning powder to remove the rust and dust, and allowed to air
dry for 12-24 hours as the case may be and the second coat being applied
on the fabricated bars before placing in position as per clause 5.3.3 of IS
9077-1979. The Rate includes cost and conveyance of all materials, labour
charges etc., complete as per the direction of Engineer in-charge.
38.55 Providing and laying self-compacting controlled concrete produced by cum 5,403.00
IS 9001 accredited plants conforming to EN 206-1 M-20 grade, with
OPC@ 185 kg/cum conforming to EN-197-1 GGBS 175 kg/cum, 20 mm
to 12.50 mm graded coarse aggregates@ 865 kg/cum, conforming to
EN-12620 obtained from a single source with a ceiling flakiness index of
5% , M-sand @ 1015 kg/cum, having aggregate particles finer than 45
microns, limited to 8% (2% for natural sand) and water cement ratio as
per EN 1008, with vertical free fall distance and horizontal flow for concrete
from point of discharge limited to 5m & 1Omts respectively including cost of
all materials, labour charges, scaffolding, curing, hire charges of machineries
etc., complete as per the direction of Engineer-in-charge of work.
38.56 Providing and laying self-compacting controlled concrete produced by IS cum 5,864.00
9001 accredited plants conforming to EN 206-1 M-25 grade, with OPC@
255kg/cum conforming to EN-197-1 GGBS 145 kg/cum, 12.5mm graded
coarse aggregates 745kg/cum, conforming to EN-12620 obtained from
a single source with a ceiling flakiness index of 5%, M-sand @ 1065 kg/
cum, having aggregate particles finer than 45 microns, limited to 8% (2%
for natural sand) and water cement ratio as per EN 1008, with vertical
free fall distance and horizontal flow for concrete from point of discharge
limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete
as per the direction of Engineer-in-charge of work.
315
Sl. No. Description Unit Rate
Rs. Ps.
38.57 Providing and laying self-compacting controlled concrete produced by IS cum 6,275.00
9001 accredited plants conforming to EN 206-1 M-30grade, with OPC@
275kg/cum conforming to EN-197-1 GGBS 185 kg/cum, 12.5mm graded
coarse aggregates 790kg/cum, conforming to EN-12620 obtained from
a single source with a ceiling flakiness index of 5%, M-sand @ 990kg/
cum, having aggregate particles finer than 45 microns, limited to 8% (2%
for natural sand) and water cement ratio as per EN 1008, with vertical
free fall distance and horizontal flow for concrete from point of discharge
limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing , hire charges of machineries etc., complete
as per the direction of Engineer-in-charge of work.
38.58 Providing and laying self-compacting controlled concrete produced by IS cum 6,621.00
9001 accredited plants conforming to EN 206-1 M-35 grade, with OPC@
305kg/cum conforming to EN-197-1 GGBS 195 kg/cum, 12.5mm graded
coarse aggregates 800kg/cum, conforming to EN-12620 obtained from
a single source with a ceiling flakiness index of 5% , M-sand@ 970kg/
cum, having aggregate particles finer than 45 microns, limited to 8% (2%
for natural sand) and water cement ratio as per EN 1008, with vertical
free fall distance and horizontal flow for concrete from point of discharge
limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete
as per the direction of Engineer-in-charge of work.
38.59 Providing and laying self-compacting controlled concrete produced by IS cum 6,928.00
9001 accredited plants conforming to EN 206-1 M-40 grade, with OPC@
400kg/cum conforming to EN-197-1 GGBS 105 kg/cum, 12.5mm graded
coarse aggregates 910kg/cum, conforming to EN-12620 obtained from
a single source within a ceiling flakiness index of 5%, M-sand @ 820
kg/cum, having aggregate particles finer than 45 microns, limited to 8%
(2% for natural sand) and water cement ratio as per EN 1008, with vertical
free fall distance and horizontal flow for concrete from point of discharge
limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete
as per the direction of Engineer-in-charge of work.
38.60 Light gauge steel frame structure (lgsfs) for dry wall panel system
Providing and fixing factory finished custom designed structurally stable, KG 174.00
corrosion resistant, cold formed wall structure, trusses, joists, purlins,
connection accessories etc., made out of 0.95 mm thick galvanized
steel coils, (AZ - 150 gms, Aluminium-Zinc alloy coated steel) having
minimum yield strength of 550 Mpa, using computerized cold forming
machine to 'C' type sections having a minimum web thickness of 89
mm, flange width 40 mm with 1Omm lip as per drawings conforming to
AISI specifications and IBC 2009 for cold formed steel and construction
confirming to Indian standards as per IS: 800-1984, IS: 801-1975,
IS:875-1987(Part Ill) and IS:1893, the LGS frames shall be manufactured
using computerized machine duly punched with dimple, service holes
and slots at required location and supplied in assembled state using
self tapping screws with corrosion resistant coating in accordance with
ASTM 8633 of specified pitch as per requirements or in a dismantled
state , and mounted I firmly fixed to the existing plinth beam using self
expandable carbon steel anchor bolts, 12 mm dia and 121 mm in length
conforming to AISI 304 & 306 standards@ 500 mm c/c with a minimum
embedment of 100 mm in RCC located at 300 mm from corners or
from bottom LGS frames confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
316
Sl. No. Description Unit Rate
Rs. Ps.
38.61 providing and fixing with internal and external cement fibre boards/
coir composite boards to lgsfs dry wall panel system
Providing and fixing for both external and internal faces of Light Gauge Sqm 3,316.00
Steel Frame Structure in two layers, sandwiching a breathable vapour
barrier in between layers as per NBC code 2009, with external face
having a 6mm thick heavy duty fiber cement board/coir composite board
fixed on a 9mm thick heavy duty fiber cement board/coir composite
board confirming to IS 14862:2000, Category IV type A or equivalent
in standard sizes and internal face with 12.5mm thick gypsum plaster
board/coir composite board fixed on 8mm thick fiber cement board/coir
composite boards confirming to IS 14862:2000 of category Ill type B
(High pressure steam cured) or equivalent ,as per standard sizes with
self drilling tapping screws half counter sunk, rib head of 1.60mm to
4mm thick, 8 to 10 gauge, length varying from 25 to 45mm I fasteners
@ 600mm c/c of approved make, with a staggered vertical joint of
2mm to 3mm sealed with a silicon based sealant and smooth finished
using fiber mesh tape and Epoxy and acrylic based joining compound
for seamless finish and the material and process of manufacture and
assembly/erection confirming to . RV-TIFAC Composite Designs and
Specifications including all costs of labour, materials, fabrication ,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
38.62 providing and fixing with eps -weld mesh-cement-sand shotcrete
wall panels to lgsfs.
Providing and fixing in position factory made expanded polystyrene core Sqm 3,241.00
(EPS core) panels 90 mm thick having a density not less than 10 kg per
cum. to both faces of LGSFS FOR WALLS and covered on both sides
with welded wire fabric mesh made of 2.2mm dia Gl wire with 50mm
pitch in both the directions, connected by Gl wire of 3mm dia to the
LGS frame structure duly plaster fin ished with short Crete plastering/
guniting equipment in required layers, 30mm thick with cement mortar
1:3 {1 cement: 3 coarse sand not having more than 40% stone chips
of size upto 6mm} at a pressure not less than 1 bar (1 00 KN/m2) and
both faces finished with trowel and completed in all respect as per
drawings and specifications confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
38.63 providing and fixing with eps -weld mesh-cement-sand shotcrete
roof/floor panels to lgsfs
Providing and fixing in position factory made expanded polystyrene core Sqm 3,387.00
(EPS core) panels 90 mm thick having a density not less than 10 kg per
cum. to both faces of LGSFS FOR ROOF/FLOOR PANELS and covered
on both sides with welded wire fabric mesh made of 2.2mm dia Gl wire
with 50mm pitch in both the directions, connected by Gl wire of 3mm
dia to the LGS frame structure duly plaster finished with short Crete
plastering/guniting equipment in required layers, 30mm thick with cement
mortar 1:3 {1 cement: 3 coarse sand not having more than 40% stone
chips of size upto 6mm)} at a pressure not less than 1 bar (1 00 KN/m2)
and both faces finished with trowel and completed in all respect as per
drawings and specifications confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
317
51. No. Description Unit Rate
Rs. Ps.
319
WHITE
BIJ.CK
L
""'?:y .1
TRANSVERSE SECTION
c'·
ioo tM
:I
DPICAI. DETAil RECOI.IWENDED PlAco.IENT OF HUWP/HUMPS
A A
~ j200 TO 250mm
200 TO 250Mt.l
11.4 c/c
RUMBLE STRIPS CROSS SECTION AT "M"
RUMBLE STRIPS
320
FURNISHING WORK
321
Sl. No. Description Unit Rate
Rs. Ps.
39.7 Providing and fixing Single shutter glass door of 12mm thick frosted Sqm 11,200.00
toughened glass of approved make (Saint Gobain, Modi float). The door
is fixed by using any approved make hardware fitting like patch fitting,
pivot, floor machine, locking arrangements and suitable SS door rails
with floral glass etching for 113 portion of door area etc complete. The
rate includes cost of all materials, labour, hire of tools & machineries,
as per specification .
39.8 Providing and fixing Double shutter glass door of 12mm thick frosted Sqm 10,630.00
toughened glass of approved make (Saint Gobain, Modi float). The door
is fixed by using any approved make hardware fitting like patch fitting,
pivot, floor machine, locking arrangements and suitable SS door rails
with floral glass etching for 113 portion of door area etc complete. The
rate includes cost of all materials, labour, hire of tools & machineries, as
per specifications etc complete. The rate includes cost of all materials,
labour, hire of tools & machineries, as per specifications.
39.9 Providing, fabricating and fixing partition frame work consisting of Sqm 8,200.00
50mm x 50mm sal wood frame work at spacing not exceeding 600mm
clc fixed to the bottom and ceiling, the partition shall be skinned on
both sides using 12mm thick commercial plywood of approved brand
termite and water resistance, and top covered with 4mm thick approved
quality veneer finished with melamine polish, complete including cost
and conveyance of all materials, labour for all items of work, HOM of
equipment as per specification.
39.10 Removing wall paneling I false ceiling I wooden partition I aluminium Sqm 60.00
partition, stacking it with all cost and conveyance labour for all items of
work, HOM of equipment etc. , complete as per specification
39.11 Providing and fixing 1OOmm wide venitian blinds of window fashion Sqm 950.00
fabric of Taiwan make, with 50mm thick powder coated channel with
balance, imported , acrylic self alignable mechanism and equally placed
spacers, imported tilting mechanism for easy tilting operation,with
nylon imported thread and beadings, 1OOmm wide imported washable
reusable fabric placed with top hanger and bottom with 1OOmm long
bottom plate connected to nylon imported bottom link chain. The rate
is inclusive of drilling holes for fixing channels to the wall, fixing threads
and beadings and link chains, hard ware fixtures etc., complete as per
drawing, specifications.
39.12 False ceiling Suspension system False ceiling (Tiles, Panels) shall be
suspended with the frame work and Accessories complete from roof
slabs, beams etc., by means of 4mm dia galvanized rods, spring steel
clips, hanger, Tee Runner, Ultra Look Tee Runner and edge trim etc.,
The Suspnsion system consists of Grip bolt of size 50mm in length
and dia of 9.5mm with 16mm long treads for fixing 9.2mm dia Nut, the
thickness of the nut is 5.2mm, this is also fixed with washer of 18.50mm
india and the thickness of the washer is 0.80mm, this grip bolt in fixed
on to the RCC slab, by making holes with special hammering machine
and with the help of nut and washer, dip Galvanized Iron Rod of 4mm
323
Sl. No. Description Unit Rate
Rs. Ps.
324
Sl. No. Description Unit Rate
Rs. Ps.
39.12.2 PVC laminated false ceiling supply & installation of PVC laminated false Sqm 2,710.00
ceiling size of 600x600mmx9mm as per the following specification:
Panels are PVC laminated on the finish side and backed with aluminum
foil (behind). It shall be suspended with the frame work and accessories
completed from roof slabs, beams etc. , by means of 4mm dia galvanized
rods, J bolt, Tee runner, Ultra look Tee Runner and edge trim etc.
39.12.5 Aluminum plain/perforated/Mirror finish false ceiling VT-09 (Vertical drop Sqm 6,885.00
9 mm) Supply and installation of Alum inum powder coated false ceiling
proof panel size 600x600mmx9mm drop, Noncombustible fire proof
325
Sl. No. Description Unit Rate
Rs. Ps.
326
Sl. No. Description Unit Rate
Rs. Ps.
327
51. No. Description Unit Rate
Rs. Ps.
39.17.1 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table No 13,400.00
top) Side Table : 900 mm W x 450mm D X 750 mm ht.
39.17.2 Main Table : 1500 mmW x 750mm D x 750 mm ht (Post formed table No 12,000.00
top) Side Table: 900 mm W x 450mm D X 750 mm ht.
329
Sl. No. Description Unit Rate
Rs. Ps.
Note: The rate for the items 39.14.1, 39.14.2, 39.15.1, 39.15.2, 39.16.1,
39.16.2, 39.16.3, 39.16.4, 39.16.5 & 39.16.6 are for the complete unit
as per the drawing appended.
331
Straight workstation (Frame and separator)
Straight workstation(Frame)
Cubicle Workstations
X TYPE TTYPE
332
"Free Standing Table for Cabin " Free Standing Table for
- without frames" Cabin -without frames"
333
Modular Partition "Storage Unit -wooden
-One side laminate"
334
335
336
337
50mm x 50mm salwood frame work 50mm x 50rrm sai'NOOd frame work
~-----
at600mmc;Jc ~---at =-=-=6=-=--=
00 rrm C/C
VJ
VJ
())
1amm thick plywood of approved brand 12mm thick plywood of approved brand
/ fixed to frame work. _/'fixed
to frame work on either side
339
51. No. Description Unit Rate
Rs. Ps.
340
Sl. No. Description Unit Rate
Rs. Ps.
341
Sl. No. Description Unit Rate
Rs. Ps.
342
Sl. No. Description Unit Rate
Rs. Ps.
343
Sl. No. Description Unit Rate
Rs. Ps.
345
Sl. No. Description Unit Rate
Rs. Ps.
grip with easy snap safety seal), Range minimum 4 Meters, applicable
on Class A,8,C and electrically started Fire, A Rating 1A, 8 Rating
138 Can Construction; Deep drawn & CO, Mig welded, Valve Construction:
Forging & Machining, Internal Coating of Can: Epoxy Powder coating,
External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, EN Approved,
5 years warranty with instalert system with Superior quality EPDM
Rubber Hosepipe etc., complete
40.24 Providing 6 Kg Fire Extinguisher Clean Agent HCFC 123
Providing 6Kg Stored Pressure Type, Pressure Gauge, Gross Weight Each 51,039.00
9.4kg. empty weight 3.4 kg Can Height 480MM, Diameter 160 MM,
Discharge Time less than 13 Sees, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 4 Meters,
applicable on Class A,8,C and electrically started Fire, A Rating 2A,
8 Rating 218 Can Construction; Deep drawn & CO, Mig welded, Valve
Construction: Forging & Machining, Internal Coating of Can: Epoxy Powder
coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet
metal thickness: 1.60MM, Helium Leak Detection Tested, EN Approved,
5 years warranty with instalert system with Superior quality EPDM
Rubber Hosepipe etc., complete
40.25 Providing 5Kg Ceiling Mounted Fire Extinguisher Clean Agent
HCFC 123
Providing 5Kg Stored Pressure Type, Pressure Gouge, Gross Weight Each 46,859.00
7.7kg. empty weight 2.7 kg Can Height 267MM, Diameter 230 MM,
Discharge Time less than 8Secs,Auto discharge mechanism, on
temperature rise, applicable on Class A,8,C and electrically started Fire,
Can Construction; Deep drawn & CO, Mig welded, Valve Construction:
Forging & Machining, Internal Coating of Can : Epoxy Powder coating,
External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, 5 Years Warranty
40.26 Providing 10Kg Ceiling Mounted Fire Extinguisher Clean Agent
HCFC 123
Providing 1OKg Stored Pressure Type, Pressure Gouge, Gross Weight Each 74,799.00
14.8kg. empty weight 4 .8 kg Can Height 316MM, Diameter 300 MM,
Discharge Time less than 1OSecs,Auto discharge mechanism, on
temperature rise, applicable on ClassA,8,C and electrically started Fire,
Can Construction; Deep drawn & CO, Mig welded, Valve Construction:
Forging & Machining, Internal Coating of Can : Epoxy Powder coating,
External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 2.0MM, Helium Leak Detection Tested, 5 Years Warranty
40.27 Providing 2Kg Fire Extinugisher Clean Agent FE36 Dupont
Providing 2Kg Stored Pressure Type, Pressure Gauge, Gross Weight Each 25,849.00
3.70kg. empty weight 1.7 kg Can Height 344MM, Diameter 108 MM,
Discharge Time minimum 8 Sees, Controlable discharge mechanism,
Range minimum 2 Meters, applicable on Class A,8,C and electrically
started Fire 8, Rating 88, Can Construction; Deep drawn & CO,
346
51. No. Description Unit Rate
Rs. Ps.
348
Sl. No. Description Unit Rate
Rs. Ps.
349
Sl. No. Description Unit Rate
Rs. Ps.
350
Sl. No. Description Unit Rate
Rs. Ps.
351
Sl. No. Description Unit Rate
Rs. Ps.
352
51. No. Description Unit Rate
Rs. Ps.
353
51. No. Description Unit Rate
Rs. Ps.
354
Sl. No. Description Unit Rate
Rs. Ps.
355
Sl. No. Description Unit Rate
Rs. Ps.
356
Sl. No. Description Unit Rate
Rs. Ps.
40.74 Supplying, Installing testing & commissioning electrically driven jockey Nos. 1,06,578.00
pump of capacity 180.0 Lmpm at 75.0m head with all the necessary
accessories viz. Pressure guages etc. operating on 3Ph 50Hz, 400/440V
AC supply including foundation bolt etc. complete. Control panel shall
be as per item No.8?
40.75 Supply installing , testing and commissioning COMMON control panel Unit 2,1 0,000.00
for fire fighting system consisting of electrical mortar driven 60 HP
Main fire pump, Jockey pump and 12.5 HP consisting of the following
INCOMING: 1 No. Set of phase indicing lamps with SFU Rate 350A
1 No. set of 400 Amps. TPNE Ai.Bus bars 1 No. 0-400 Amps. Ammeter,
1 No.0-600V voltmeter with phase selector switch, Isolating Switch
400 A OUTGOING for Main Electrical Pump: 1 No. 200 Amps MCB
1 No.S/D starter suitable for 60 HP 1 No. Singel phse preventor suitable
for the pump described above 1 No. set of ON/OFF indicating lamps
1 No. Automanual selector switch OUTGOING for Jockey Pump: 1 No.
50 Amps MCB 1 No. DOL starter suitable for 12.50 HP 1 No. Single
phase preventor suitable for the pump described above 1 No. set of
ON/OFF indicating lamps 1 No. Automanual selector switch ENGINE
CONTROL SECTION N0.1 Diesel Engine for Standby pump: a) Main
switch 2 pole ON/OFF -1 No. b) Batter charger with transpormer with
rectifier reistance DC ammeter, DC voltmeter, T/B selector swith -1 set
c) Indicating lamps for fault communication (Battery charger, supply
ON, Control ON , engine running, low oil pressure, high water pressure
and enginer overspeed) - 6 Nos. Push buttons for starter, stop reset -
4 Nos. e) Selector switches (Engine control, mode selctor)- 2 Nos. f)
Auxilary rellays/contractors/timer for dsequience operating for starting
and stopping of the engine -1 g) Hooter for audio alarm (Industrial
type) -1 No. Accessoreis for outgoing supply for the morttors Gl SWD
earthing wire for the aove motor Accessories for outgoing supply for
Diesel Enginer: Copper conductor armoured cabe 2.5 sqmm of 12 Core
x 2 runs a) Battery 2 strands b) Enginer ON/OFF 2 strands c) Low oil
pressure 3 strands d) Enginer oversped 2 strands e) Water temperature
2 strands f) Spare 1 strand The cost of control panel shall also include
necessary pressure swithces with necessary cabling & inter-locked with
the panel to enable sequential operation of Pumps. Including terrace
mortar necessary earthing All the components shall be housed in a
common cubical. However, the feed cable for diesel engine driven
pump battery charger shall be taken separately
40.76 Supplying Installing testing and commissioning electrically driven Nos. 88,500.00
Terrance pump of capacity 900.0 Lpm at 35.0m Head with all the
necessary accessories viz. Pressure guages etc. operating on 3Ph
50Hz, 400/440V AC supply includng foundation , bolts etc. complete.
Control panel shall be as per spesification 87
40.77 Exacavation in all sorts of soil for laying pipes upto 1OOmm dia including cum 245.00
forming bottom surface to required level, refilling seleted excavated
earth around the pipe in layers of 150mm thick, watering consolidating
and disposing off the surplus earath within the stie or as directed by
the site engineer etc. complete Depth upto 1.0m
358
51. No. Description Unit Rate
Rs. Ps.
40.78 Supply installation, testing and commissioning of fire alarm Main panel Nos. 80,000.00
with 15 zone indication ala ram etc. as required
40.79 Supplying Installing testing and commissioning approved make Nos. 2,88,000.00
Centrifugal pump end suction type couple to Electric mortar of suitable
HP, fitted on a common base frame and rated for Fire duty. including
2 nos. Pressure guages fitted on suction & delivery side of the pump. The
pums shall run on 400/440V, 3ph, 50Hz electric supply, Duty of pumps:
2850 Lpm@ 70.0m Head. Control panel shall be per specification stated
in Item No.8?. (Cost of control pannel is not included)
40.80 Supplying, Installing, testing and commisioning of fire hydrant multi stage Nos. 5,50,000.00
pump capable of delivering 2850Lpm @ 70.0m head coupled to water
cooled diesel engine of adequiate HP. It shall be fitted with a radiator
on a common base from with complete ancilalary units such as calling
system, non return Valve, Y strainer, fuel tank of adequate coapcity,
Pressue guage, pressure switch. Control panel shall be per specification
stated in Item No.8?. (Cost of control pannel is not inc!uded)
40.81 Supplying, Installing, testing and commisioning electrically driven jockey Nos. 82,974.00
pump of capacity 180.0 Lpm at 70.0m head with all the necessary
accessories viz. Pressure guages etc. operating on 3Ph 50Hz, 400/440
V AC supply incldung foudnation, bolts etc. complete Control panel shall
be per specification stated in Item No.8?. (Cost of controle pannel is
not included)
40.82 Supplying, Installing, testing and commissioning approved make Nos. 3,26,172.00
Centrifugal pump end suction type couple to Electric motor of suitable
Hp, fitted on a common base frame and rated for Fire duty. The quoted
price shall aslso include 2 nos. Pressure guages fitted on suction and
delivery side of the pump. The pumps shall run on 400/440V, 3ph,
35-Hz electric supply. Duty of pumps: 2850 Lpm@ 90.0m Head. Control
panel shall be per specification stated in Item No.8?. (Cost of control
pannel is not included)
40.83 Supplying Installing testing and commissiong COMMON Control panel Nos. 2,50,000.00
for fire fighting system consiting of electrical motor driven 60HP Main
fire pump, Diesel engine driven pump 60 HP Sprinkler pump 50HP &
Jockey pump 25HP
40.84 Supplying, Installing, testing and commissioning approved make Nos. 2,88,000.00
Centrifugal pump end suction type couple to Electric motor of suitable
Hp, fitted on a common base frame and rated for Fire duty. The quoted
price shall aslso include 2 nos. Pressure guages fitted on suction &
delivery side of the pump. The pumps shall run on 400/440V, 3 ph,
50Hz electric supply. Duty of pums: 1620 Lpm@ 70.0m Head. Control
panel shall be per specification stated in Item No.8?. (Cost of control
pannel is not included)
40.85 Supplying, Installing testing and commissioning of fire hydrant multi Nos. 3,50,000.00
stage pump capable of delivering 1620 Lpm @ 70.0m head coupled
to water coiled diesel enginer of adequate. HP. It shall be fitted with a
radiator on a common base frame with complete ancillary units such
359
51. No. Description Unit Rate
Rs. Ps.
40.95 Supplying Installing, testing and commissioning of approved make Each 500.00
15mm dia sprinkler bulb pendent/wall mounted type designed to operate
68 degrees centegrad Make Tyco/HD FIRE complete (Colour code
of bulb liquid inside Glass bulb type Pendants As per IS 9972: src-
Orange, 68oC- Red, 79oC- Yellow, 93°C- Green, 141 °C- Blue, 182°C
-Mauve, 227/260°C- Black)
40.96 Supplying Installing, testing and commissioning of hydraulicallying
operated sprinkler cabit Valve with water meter gong bell and trims as
required, pressure gauges drain Valve, ball Valves check valve, strainer etc.
40.96.1 -do-1 00 mm dia. complete Unit 800.00
40.96.2 -do- 150 mm dia. complete Unit 1,500.00
40.97 Supply, Installation testing and commissioning of approved make heavy
quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows
check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports
work includes two coats of metal primer and two coats of Red enamel
paint etc.
40.97.1 -do- 200 mm dia. complete m 2,226.00
40.97.2 -do- 150 mm dia. complete m 1,810.00
40.97.3 -do- 100 mm dia. complete m 1,378.00
40.97.4 -do- 80 mm dia. complete m 1,096.00
( 40.97.5 -do- 65 mm dia. complete m 969.00
-,.J 40.97.6 -do- 50 mm dia. complete m 854.00
40.97.7 -do- 40 mm dia. complete m 733.00
40.97.8 -do- 32 mm dia. complete m 692.00
40.97.9 -do- 25 mm dia. complete m 639.00
40.98 Wraping and Galing of U/G pipe line work includes one coat of anti
corrossion paint (Black) and two coats of Bituminous cloth.
40.98.1 -do- 200 mm dia. complete m 360.00
361
51. No. Description Unit Rate
Rs. Ps.
362
SI.No. Description Unit Rate
Rs. Ps.
363
Sl. No. Description Unit Rate
Rs. Ps.
Note: ANNEX B
(Clause 5.3, 152190:2010)
RECOMMENDATIONS FOR INSTALLATION OF FIRE EXTINGUISHERS
B-1 occupancies classified according to IS 1641 are given together with nature of fire hazard and type of fire risk along with typical
examples. The classifications, groupings etc., given in this Annex are only for general guidance for installation of fire extinguishers and not
for other purposes.
364
Sl. No. Description Unit Rate
Rs. Ps.
MH Class C ---
HH Class C Fertiliser plants, petrochemical plants, LPG bottling plants, etc.
All processes involving use of combustible highly flammable materials,
HH Class D
reactive metals and alloys, including their storage
Storage Flammable liquid stores, storage in drums and cans in open, paints and
Group H MH Class B
buildings varnishes godown.
Tank farmes chemical and petroleum bulk storage depots, large service stations,
HH Class B
truck and marine terminals, underground LDO/furnace oil storage yards, etc.
LPG distribution godown/office, distribution storage godowns/offices of
MH Class C
D, N, H, Argon and other industrial gases
Storage and handling of gas cylinders in bulk, gas plant, gas holders (Horton),
HH Class C
spheres, etc.
Buildings used for storage, handling, manufacture and processing of highly
combustible explosive materials. (Risks involved in terms of class of fire
Group J hazardous --- --- and intensity of fire has to be assessed on case to case lfasis and statutory
authorities to be consulted, environmental factors and mutual aid facilities to be
taken into account before deciding on the fire extinguisher requirements.)
NOTES : 1 LH- Low Hazard, 2 MH- Medium Hazard, 3 HH- High Hazard, 4 SH: Special Hazard.
365
51. No. Description Unit Rate
Rs. Ps.
HH Occupancy Dry powder extinguisher (stored pressure) of 10 kg or 6.5 Kg C02 extinguisher, or 5 kg clean agent extinguisher
for every 100 m2 of floor area or part thereof, subject to a minimum of two extinguishers of same type per room
or compartment. Extinguishers should be available within a radius of 10 m.
B-2.4 Class D
HH Occupancy One 10 kg dry powder extinguisher with special dry powder for metal fires for every 100 m2 of floor area or part
thereof with minimum of two extinguisher per compartment/ room. Extinguishers should be available within a
radius of 10m.
NOTES-
1. The recommendations are minimum for a specific area. Incase, the area is more than specified, high capacity extinguishers may be
used based on these minimum requirements,that is proportionately higher capacity can be used.
2. In case of dry powder / Co2/clean agent types, equivalent lower capacities may also be used.
3. The halons shall be restricted for essential use only.
4. On implementation of IS 15683, 6 kg and 9 kg dry powder extinguishers shall be replaced by 5 kg or 10 kg dry powder extinguishers.
366
ENERGY CONSERVATION
BUILDING CODE
367
Sl. No. Description Unit Rate
Rs. Ps.
WALL INSULATION
368
Sl. No. Description Unit Rate
Rs. Ps.
41.5.1 - do - Glass wool slab 12mm thick resin bonded slab Sqm 535.00
41 .5.2 - do - Glass wool slab 25mm thick resin bonded slab Sqm 710.00
41.5.3 - do - Glass wool slab 50mm thick resin bonded slab Sqm 833.00
ROOF INSULATION
OVER DECK INSULATION WITH POLYURETHANE FOAM (PUF) SLAB
41.8 Providing and fixing polyurethane foam (PUF) slab with PU slab density
36+/-2 kg/m 3 insulation for over deck covered with two layers of 40mm
thick cement concrete screed with mix proportion 1:1.5:3 (M20grade)
using 12.50mm nominal size aggregates and top layer of 1Omm thick
plaster with cement mortar 1:3 finished with floating coat of neat cement,
including necessary polymerized plaster reinforced with glass fibre
mesh for PUF slab, epoxy bases bonding adhesive etc., complete with
all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM of machinery etc. , complete
41.8.1 - do - Polyurethane foam (PUF) slab 40mm thick Sqm 1,664.00
41 .8.2 -do- Polyurethane foam (PUF) slab 50mm thick Sqm 2,024.00
41.8.3 -do- Polyurethane foam (PUF) slab 60mm thick Sqm . 2,412.00
41.8.4 -do- Polyurethane foam (PUF) slab 70mm thick Sqm 3,309.00
etc., complete covered with two layers of 40mm thick cement concrete
screed with mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal
size aggregates and top layer of 1Omm thick plaster with cement mortar
1:3 finished with floating coat of neat cement, including necessary
polymerized plaster reinforced with glass fibre mesh for PUF slab,
epoxy bases bonding adhesive etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM of machinery etc. , complete
41 .9.1 -do- Over deck insulation with polyurethane foam (PUF) spray 40mm thick Sqm 2,184.00
41.9.2 -do- Over deck insulation with polyurethane foam (PUF) spray 50mm thick Sqm 2,421.00
41 .9.3 -do- Over deck insulation with polyurethane foam (PUF) spray 60mm thick Sqm 3,298.00
41.9.4 -do- Over deck insulation with polyurethane foam (PUF) spray ?Omm thick Sqm 3,813.00
370
51. No. Description Unit Rate
Rs. Ps.
371
Sl. No. Description Unit Rate
Rs. Ps.
372
~ l?OIJ. ~
[Z"Yt
r' :--
~
VLLNJE
~~~T[OIIl !KJA~tt
RC.C. POle
g l (lx!UO
G L
..
•
--
'
~ ,_
ft ~· -. I ~JJct
!-
11;3·~
~-
R.C.C Pol e
O.l5xO.l5
, .
J 450 J
373
ANNEXURE 1
CO-EFFICIENTS FOR PAINTING, VARNISHING ETC.,
TABLE : 1 EQUIVALENT PLAIN AREAS OF UNEVEN SURFACES (CLAUSE 3.5)
i) Panelled or framed and brazed or Measured flat (not girthed) including ~HOWKAT 1.30 (for each side)
ledged and battened or ledged, or frame, Edged, chocks, cleats, etc., shall be
batten-battened and braced deemed to be included in the item
joinery
ii) Flush joinery Measured flat (not girthed) including CHOWKAT 1.20 (for each side)
or frame, edges, chocks, cleats, etc., shall be
deemed to be included in the item
iii) Flush shutter Measured flat overall 1.20 (for each side)
iv) Fully glazed or gauzed joinery Measured flat (not girthed) including CHOWKAT 0.80 (for each side)
or frame, Edges, chocks , cleats shall be
deemed to be included in the item
v) Partly panelled and partly glazed Measured flat (not girthed) including CHOWKAT 1 (for each side)
or gauzed joinery or frame, edges, chocks, cleats, etc., shall
deemed to be included in the item
vi) Fully venetianed or louvred joinery Measured flat (not girthed) including CHOWKAT 1.80 (for each side)
or frame, edges, chocks, cleats, etc., shall be
deemed to be included in the item
vii) Weather boarding Measured flat (not girthed) supporting frame 1.20 (for each side)
work shall not be measured separately
viii) Wood shingle roofing Measured flat (not girthed) 1.10 (for each side)
ix) Boarding with covers fillets and Measured flat (not girthed) 1.05 (for each side)
match boarding
x) Tile and slate battening Measured flat overall ; no deduction shall be made 0.80 (for painting all
for open spaces over)
xi) Trellis (or JAFFRI) work one-way or two way Measured overall ; no deduction shall be made for 2 (for painting all over)
open spaces, supporting members shall not be
measured seperately
xii) Guard bars , balus-traders, gates Measured flat overall ; no deduction shall be made 1 (for painting all
greetings, grills expanded for open spaces; supporting members shall not be over)
metal and railings measured separately
374
xiii) Gates and open palisade fencing Measured flat overall; no deduction shall made 1 (for painting all
including standards, braces, rails for open spaces; supporting members shall not be over)
stays etc. , measured separately (see Note 1)
xv) Steel roller shutter Measured flat (size of opening) overall; jam 1.10 (for each side)
guides, bottom raise and locking arrangement, etc.,
shall be included in the item (top cover shall be
measured separately)
xvi) Plain sheet steel doors and windows Measured flat (not girthed) including frame, edges, 1.10 (for each side)
etc
xvii) Fully glazed or gauzed steel doors Measured flat (not girthed) including frame, edges 0.50 (for each side)
and windows
xviii) Partly papelled and partly glazed Measured flat (not girthed) including frame, edges 0.80 (for each side)
gauged steel door
xiix) Collapsible gate Measured flat (size of opening) 1.50 (for painting all over)
Note 1 : The height shall be taken from bottom of lowest rail, if palisades do not go below it or from lower end of palisades, if they
project below lowest rail, up to top of palisades, but not up to top of standards, if they are higher than palisades.
Note 2: Where doors, windows, etc., are of composite types other than !hoses included in this table, different portions shall be measured
separately with their appropriate coefficients, centre line of common rail being taken as the dividing line between the two portions.
Note 3 : Measurements of painting doors, windows, collapsible gates, rolling shutters, etc., as given in this table shall be deemed to
include painting, if required, of all iron fittings in the same shade.
Note 4 : When two faces of a door, window, etc., are to be treated with different specified finishes, measurable under separate items,
edges of frames and shutters shall be treated with the one or the other type of finish and measurement thereof shall be deemed to be
included in the measurement of the face treated with that finish.
Note 5 : In case where shutters are fixed on both faces of a frame, measurement for the door frame and shutter on one face shall
be taken in the manner already described, while the additional shutter on the other face shall be measured exclusive of the frame.
Note 6: Where shutter is provided with clearence exeeding 15 em at top and I or at bottom, such openings shall be deducted from
the overall measurement and relevant coefficient applied.
375
38. MATERIAL REQUIREMENT DETAILS
Granite I Metal Surkhi I
Stones I Bricks Marbledust or Flyas~ Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
Mortar
1 0.5.1.1 Cement Mortar of mix 1:1 Cum 0.7125 20.4 1020.00
2 0.5.1.2 . Cement Mortar of mix 1:2 Cum 0.95 13.6 680.00
3 0.5.1.3 Cement Mortar of mix 1:3 Cum 1.07 10.2 510.00
4 0.5.1.4 Cement Mortar of mix 1:4 Cum 1.07 7.6 380.00
5 0.5.1.5 Cement Mortar of mix 1:5 Cum 1.07 6.2 310.00
6 0.5.1.6 Cement Mortar of mix 1:6 Cum 1.07 5.00 250 .00
7 0.5.1.7 Cement Mortar of mix 1:8 Cum 1.07 3.8 190.00
8 0.5.1 .8 Cement Mortar of mix 1:10 Cum 1.07 3.00 150.00
9 0.5.1.1 Lime Mortar of mix 1:1 Cum 0.7125 9.02 451.00
10 0.5-2.2 Lime Mortar of mix 1:2 Cum 0.95 6.02 301.00
11 0.5-2.3 Lime Mortar of mix 1:3 Cum 1.07 4.52 226.00
12 0.5-3.1 Limesurkhi Mortar of mix 1:1 Cum 0.7125 9.02 451.00
13 0.5-3.2 Limesurkhi Mortar of mix 1:2 Cum 0.95 6.02 301.00
14 0.5-3.3 Limesurkhi Mortar of mix 1:3 Cum 1.07 4.52 226.00
15 0.5-4.1 Limesurkhi Sand Mortar of mix 1:1:1 Cum 0.475 0.475 6.02 301.00
16 0.5-4.2 Limesurkhi Sand Mortar of mix 1:1:2 Cum 0.357 0.357 4.52 226.00
17 0.5-5.1 Cement Mortar with Stone dust of mix 1:2 Cum 6.95 13.6 680.00
C=8.20 C=410.00
18 0.5-6.1 Cement Lime Mortar of mix 1:1:3 Cum 0.86 L=3 .62 L=181 .00
19 0.5-6.2 Cement Lime Mortar of mix 1:1:4 Cum 1.07 C=7.6 C=380.00
L=3.40 L=170.00
20 0.5-6.3 Cement Lime Mortar of mix 1:1 :5 Cum 1.07 C=6.20 C=310.00
L=2.70 L=135.00
~=50L=2 . 26 C=250.00
376
Granite I Metal Surkhi I
Stones I Bricks ~arbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
21 0.5-6.4 Cement Lime Mortar of mix 1:1 :6 Cum 1.07 L=113.00
C=4.40 C=220.00
22 0.5-6.5 Cement Lime Mortar of mix 1:1 :7 Cum 1.07 L=1.94 L=97.00
C=3.80 C=190.00
23 0.5-6.6 Cement Lime Mortar of mix 1:1:8 Cum 1.07 L=1.68 L=84.00
C=3.40 C=170.00
24 0.5-6.7 Cement Lime Mortar of mix 1:2:9 Cum 1.07 L=3.02 L=151.00
C=2.60 C=130.00
25 0.5-6.8 Cement Lime Mortar of mix 1:3:2 Cum 1.07 L=3.40 L=170.00
26 0.5-7.1 White cement Mortar with Marble 1:2 Cum 0.95 13.60 680.00
dust of mix
27 0.5-7.2 White cement Mortar with Marble dust of mix 1:3 Cum 1.07 10.2 510.00
28 0.5-7.3 White cement Mortar with Marble dust of mix 1:4 Cum 1.07 7.6 380.00
29 0.5-7.4 White cement Mortar with Marble dust of mix 1:5 Cum 1.07 6.20 310.00
30 0.5-8.1 Fly ash sand Mortar of mix 1:1.5:3 Cum 0.357 0.7150 6.8 340.00
31 0.5-8.2 Fly ash sand Mortar ofmix 1:2:4 Cum 0.356 0.7150 5.0 250.00
32 0.5-8.3 Fly ash sand Mortar of mix 1:2.5:5 Cum 0.356 0.7150 4.0 200.00
33 0.5-8.4 Fly ash sand and Mortar of mix 1:3:6:5 Cum 0.366 0.7150 3.2 160.00
EARTHWORK
1 2.6 Sand filling Cum 1.0000
2 2.8 Filling Foundation with granite metal Cum 1.00 0.50000
3 2.10 Sand cement bed with 5% cement Cum 1.0000 1.43 71.40
4 2.11 Sand cement bed with 10% cement Cum 1.0000 2.86 142.80
5 2.12 Sand Piles Sqmt 0.0140 - -
6 2.13 Sand cement Piles Sqmt 0.014 0.04 2.00
L___ _ _ ___
377
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
CEMENT CONCRETE
1 4.1 KSRB 4.1.1: Providing and laying .. .. .. cement concrete of mix M15 Cum - 240 Kg -
2 4.2 KSRB 4.1 .2 : Providing and laying .. .. .. cement concrete of mix M 10 Cum - 220 Kg -
3 4.3 KSRB 4.1.3 : Providing and laying .. .. .. cement concrete of mix M 7.5 Cum - 180 Kg -
4 4.4 KSRB 4.1.4 : Providing and laying .. .. .. cement concrete of mix M 5 Cum - 160 Kg -
5 4.5 KSRB 4.1.5 : Providing and laying ...... cement concrete of mix M 20 Cum - 300 Kg -
6 4.6 KSRB 4.1.6 : Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
7 4.7 KSRB 4.1.7 : Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
8 4.10 KSRB 4.2.1 : Providing and laying .... .. cement concrete of mix M 25 Cum - 340 Kg -
9 4.11 KSRB 4.2.2 : Providing and laying ...... cement concrete of mix M 20 Cum - 320 Kg -
10 4.12 KSRB 4.2.3 : Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
11 4.13 KSRB 4.2.4 : Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
12 4.14 KSRB 4.2.5 : Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
13 4.15 KSRB 4.2.6 : Providing and laying .. .... cement concrete of mix M 10 Cum - 220 Kg -
14 4.16 KSRB 4.2.7 : Providing and laying ...... cement concrete of mix M 25 Cum - 340 Kg -
15 4.17 KSRB 4.2.8 : Providing and laying ...... cement concrete of mix M 20 Cum - 320 Kg -
16 4.18 KSRB 4.2.9 : Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
17 4.19 KSRB 4.2.1 0 : Providing and laying .. .... cement concrete of mix M 20 Sqm - 24 Kg -
18 4.20 KSRB 4.2.11 : Providing and laying .. .... cement concrete of mix M 20 Sqm - 27.2 Kg -
19 4.46 KSRB 4.9.2: Providing T.M.T. steel reinforcement for RCC work Qtl - 1.075 qtl
378
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. of SR
1 2 3 4 5 6 7
20 4.49.1 Providing and laying readymix concrete ... .. . M20 Cum - 320 Kg -
21 4.49.2 Providing and laying readymix concrete ...... M25 Cum - 340 Kg -
22 4.49.3 Providing and laying ready mix concrete .. .... M30 Cum - 360 Kg -
23 4.49.4 Providing and laying readymix concrete ...... M35 Cum - 390 Kg -
24 4.49.5 Providing and laying readymix concrete ...... M40 Cum - 420 Kg -
25 4.55 Providing and casting reinforced CC racks .. .... M20 Sqm - 16 Kg -
26 4.56 Providing RCC loft (atta) Sqm - 30 Kg -
27 4.57 Providing and fixing RCC slabs 5 ems thick for wall shelves .... M20 Sqm - 16 Kg -
28 4.58.1 Providing RCC design mix M20 ..... solid parapet .... 7.5 ems thick Sqm - 24 Kg -
29 4.58.2 Providing RCC design mix M20 ..... solid parapet .... 10.00 ems thick Sqm - 32 Kg -
-
379
Granite Metal I Surkhi I
Stones I Bricks ~arbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
STONEWORK
380
Granite I Metal Surkhi I
Stones I Bricks Marbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
13 5-4.4 Size stone masonry in super structure with
cement mortar 1:4 Cum 1.449 0.30 2.128 106.40
14 5-11 Hallow block masonry in cement mortar 1:4
40x20x20 ems 50kglsqcm Sqm 12.11Nos. 0.02 0.15 7.36
15 5-12 Hallow block masonry in cement mortar 1:4
40x20x20 ems 35kglsqcm Sqm 12.11 Nos. 0.02 0.15 7.38
..
16 5-13 Hallow block masonry in cement mortar 1:4
40x1 Ox20 ems 35kglsqcm Sqm 12.11 Nos. 0.012 0.082 4.09
17 5-14 Solid block masonry in cement mortar 1:4
40x20x20 ems 35kglsqcm Sqm 12.11Nos 0.02 0.15 7.38
18 5-15 Solid block masonry in cement mortar 1:4
40x1 Ox20 ems 35kglsqm Sqm 12.11 Nos. 0.012 0.082 4.09
19 5.29.1 Providing and fixing pre cast solid concrete kerb
size 450x200x400 mm No. - - - 0.234 11.72
20 5.29.2 Providing and fixing pre cast solid concrete kerb
size 450x150x500 mm No. - - - 0.22 11 .00
21 5.30 Providing and fixing pre cast solid C.C. kerb ston sNo. - - - 0.165 8.235
BRICKWORK
1 6-1 .1 Non modular CL35 brick masonry in mud mortar
for basement and super structure Cum 485 Nos. 2.40
2 6-1.2 Non modular CL35 brick masonry in
cementmortar 1:8 for basement and super
structure Cum 485 0.26 0.912 45.60
3 6-1.3 Non modular CL35 brick masonry in
cementmortar 1:6 for basement and super
structure Cum 485 0.26 1.20 60.00 I
- - -- - - -
381
Granite I Metal Surkhi I
Stones I Bricks ~arbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
4 6-2.1 Non modular CL50 table moulded brick masonry
in mud mortar for basement and super structure Cum 485 2.40
5 6-2.2 Non modular CL50 table moulded brick masonry
in cement mortar 1:8 for basement and super
structure Cum 485 0.26 0.912 45.60
6 6-2.3 Non modular CL50 table moulded brick masonry
in cement mortar 1:6 for basement and super
structure Cum 485 0.26 1.20 60.00
7 6-2.4 Non modular CL50 table moulded brick masonry
in cement mortar 1:4 for basement and super
structure Cum 485 0.26 1.824 91 .20
8 6-3.1 Non modular CL75 machine moulded brick
masonry in cement mortar 1:8 for basement and
super structure Cum 456 0.26 0.912 45.60
9 6-3.2 Non modular CL75 machine moulded brick
masonry in cement mortar 1:8 for basement and
super structure Cum 456 0.26 1.2 80.00
10 6-3.3 Non modular CL75 machine moulded brick
masonry in cement mortar 1:4 for basement and
super structure Cum 456 0.26 1.824 91.20
11 6-3.4 Non modular CL75 machine moulded brick
masonry in cement mortar 1:3 for basement and
super structure Cum 456 0.26 2.448 122.40
382
Granite I Metal Surkhi I
Stones I Bricks ~arbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgsl
1 2 3 4 5 6 7 8 9
383
Granite I Metal Surkhi I
Stones I Bricks Marbledust or Flyash Mortar I Cement I Lime I
Sl. KSRBI Description Unit Tiles I Hallow I stone dust in sand in white cement
No. KSRRB No. Solid block etc cum cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 9
384
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
DRAINAGE WORK
385
MATERIAL REQUIREMENT DETAILS
Granite I Metal
Stones I Bricks Morter I Cement I Lime I !
386
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8
14.20 14(11.3) Marble chips - 17.3 kgs, white cement 0.08 bags,
marble powder- 0.0017 cum, pigment Sqm 0.025 0.0125 0.18
14.21 14(11.4) marble chips -17.3 kgs, white cement 0.1 6 kgs
marble powder- 0.0017 cum Sqm 0.025 0.012 0.18
14.22 14(11.5) Alluminium sheet for strips - 0.042sqm Sqm
14.23 14(11.6) glass strips- 0.044 sqm Sqm
14.24 14(12.1) mosaic tiles - 1.1 sqm, pigment- 0.30 kgs Sqm 0.028 0.31
14.25 14(12.2) white cement- 0.08 bags, pigment - 0.30 kgs Sqm 0.028 0.22
14.26 14(12.3) mosaic tiles - 1.1 sqm, white cement- 0.04 bags,
pigment - 0.30 kgs Sqm 0.028 0.26
14.27 14(12.4) white mosaic tiles - 1.10 sqm,
white cement- 0.17 bags Sqm 0.028 0.13
14.28 14(13.1) checkered mosaic tiles - 1.10 sqm, pigment- 0.3 kgs Sqm 0.013 0.30
14.29 14(13.2) checkered mosaic tiles - 1.10 sqm,
white cement- 0.088 bags, pigment- 0.3 kgs Sqm 0.013 0.22
14.30 14(13.3) mosaic tiles - 1.10 sqm, white cement- 0.04 bags,
pigment- 0.30 kgs Sqm 0.013 0.26
14.31 14(13.4) mosaic tiles - 1.10 sqm, white cement- 0.17 bags Sqm 0.013 0.13
14.32 14(14.1) white glazed tiles- 46 nos, white cement- 0.002 bags Sqm 0.013 0.19
14.33 14(14.2) white glazed tiles - 46 nos, white cement - 0.002 bags Sqm 0.013 0.19
14.34 14(14.3) white glazed tiles - 46 nos, white cement- 0.002 bags Sqm 0.013 0.19
14.35 14(14.4) white glazed tiles - 46 nos, white cement - 0.002 bags Sqm 0.013 0.19
14.36 14(14.5) ceramic tiles - 1.10 sqm, white cement- 0.002 bags Sqm 0.013 0.19
14.37 14(15.1) marble slabs- 1.15 sqm, white cement- 0.01 bags Sqm 0.028 0.22
14.38 14(16.1) Sqm 0.02 0.20 •
387
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 •
388
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No. Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8
15.24 15(4.2) Water proof compound - 0.09 kgs Sqm
15.25 15(4.3) Water proof compound - 0.125 kgs Sqm
15.26 15(4.4) Water proof compound - 0.15 kgs Sqm
15.27 15(4.5) Water proof compound - 0.167kgs Sqm
15.28 15(4.6) Water proof compound - 0.22 kgs Sqm
15.29 15(4.7) Water proof compound - 0.167 kgs Sqm
15.30 15(5.1) Providing tough cement plastering em 1:4 Sqm 0.017 0.125
15.31 15(5.2) Providing tough cement plastering em 1:6 Sqm 0.017 0.08
15.32 15(6) Providing flooring coat of cement Sqm 0.028
15.33 15(7) Lime- 0.00251cum Sqm
Sqm
Sqm
Sqm
Sqm
15.38 15(1 0.1) burnt lime - 0.003 quintal Sqm
15.39 15(10.2) Burnt lime - 0.0015 quintal Sqm
15.40 15(1 0.3) Burnt lime - 0.003 quintal Sqm
15.41 15(10.4) Burnt lime - 0.015 quintal Sqm
15.42 15(11.1) Sqm 0.10 kg
15.43 15(11.2) Linseed oil 0.08 ltr. Sqm 0.10 kg
15.44 15(12.1) Gopi - 0.025 kg , white lime - 0.003 quintal Sqm
15.45 15(12.2) Burnt lime 0.0015, Gopi - 0.013 Sqm
15.46(1) 15(13.1) Distemper- 0.081 ltr Sqm
15.46(2) 15(13.2)
15.47 15(13.3) Dry distemper- 0.1 kg, whitening - 0.1 kg
389
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No. Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8
15.48(2) 15(13.5) Dry distemper- 0.06 kg
15.48(3) 15(13.7) Dry distemper- 0.04 kg
15.49 15(14.1) Distemper- 0.081 ltr, oil bound - 0.15 kg
15.50(1) 15(14.3) Oil bound - 0.1 kg
15.51 15(15.1) Plastic emulsion paint- 0.12 ltr
15.52(1) 15(15.3) Plastic emulsion paint- 0.073 ltr
15.52(3) 15(15.5) Plastic emulsion paint- 0.049 ltr
15.53 15(16.1) Water proof cement paint - 0.3 kg
15.54(1) 15(16.2) Water proof cement paint - 0.18 kg
15.54(2) 15(16.3) Water proof cement paint- 0.12 kg
15.55 15(17.1) White lead paint - 0.1 ltr
15.56 15(17.2) Pink primer paint- 0.09 ltr
15.57 15(17.3) Alluminium paint primer- 0.1 ltr
15.58 15(17.4) Enamel primer- 0.09 ltr
15.59 15(17.5) Liquid wood filler - 0.075 ltr
15.60 15(17.6) Enamel metal paint- 0.15 ltr
15.61(1) 15(17.7) Enamel metal paint- 0.09 ltr
15.61 (2) 15(17.8) Enamel metal paint- 0.09 ltr
15.62 15(17.9) Undercoat flatting varnish- 0.07 ltr. , Varnish- 0.075 ltr
15.63(1) 15(17.10) Varnish - 0.075 ltr
15.63(2) 15(17.11) Varnish - 0.075 ltr
15.64 15(17.12) Spirit- 0.161tr., Shellac- 0.024 kg,
Linseed oil- 0.0121tr. , pigment- 0.012 kg
15.65 15(17.13) Spirit - 0.0951tr. , Shellac- 0.013 kg ,
Linseed oil - 0.007 ltr.,
-- _L___
390
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No. Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8
15.66 15(17.14) Bees wax- 0.05 kg, Linseed oil- 0.036 ltr.,
Tarpentine- 0.024 ltr., Varnish- 0.012 ltr
15.67 15(17.15) Bees wax- 0.25 kg, Linseed oil- 0.018 ltr.,
Tarpentine- 0.012 ltr., Varnish- 0.006 ltr
15.68 15(17.16) Coltar paint - 0.095 ltr
15.69 15(17.17) Coltar paint - 0.057 ltr
15.70 15(17.18) Coltar paint- 0.057 ltr
15.71 15(17.19) Black japan paint- 0.07 ltr
15.72 15(17.20) Black japan paint - 0.07 ltr
15.73 15(18.01) Ready mix primer paint- 0.09 ltr
15.74 15(18.2) Enamel metal paint - 0.15 ltr
15.75 15(18.3) Enamel metal paint - 0.09 ltr
15.76 15(18.4) Alluminium paint - 0.08 ltr
15.77 15(18.5) Alluminium paint - 0.046 ltr
15.78 15(18.6) Black japan paint - 0.07 ltr
15.79 15(18.7) Black japan paint - 0.07 ltr
15.80 15(19.1) Ready mix primer paint- 0.084 ltr.,
plaster of paris - 0.05 kg
15.81 15(19.2) Wall paint- 0.11 ltr., patti- 0.025 kg
15.82 15(19.3) Wall paint- 0.65 ltr., patti- 0.015 kg
15.83 15(20.1) Ready mix primer paint- 0.148 ltr
15.84 15(20.2) Ready mix primer paint- 0.09 ltr
15.85 15(21.1) Wax polish- 0.01 kg
15.86 15(21.2) Wax polish- 0.007 kgs
15.87 15(22.1) Marble chips - 0.87 kgs,
marble powder- 0.0007 cum, pigment- 0.285 kgs 0.031 0.37
---
391
Granite I Metal
Stones I Bricks Morter I Cement I Lime I
Sl. KSRBI Description Unit Tiles Hallow I sand in white cement
No. KSRRB No Solid block etc cum
in cum
Bags Kgs
1 2 3 4 5 6 7 8 I
15.88 15(22.2) White cement- 0.41 kg, Marble chips - 0.87 kgs,
Marble powder- 0.0007 cum, pigment- 0.285 kgs 0.03 0.30 '
15.89 15(22.3) White cement- 0.04 bags, Marble chips- 8.7 kgs,
Marble powder- 0.0007 cum, pigment- 0.28 kgs 0.03 0.34
15.90 15(22.4) White cement - 0.08 bags, Marble chips - 8.7 kgs,
Marble powder - 0.0007 cum 0.03 0.30
15.92 15(23.1) Mosaic tiles - 1.1 0 sqm 0.012 0.258
15.93 15(23.2) Mosaic tiles - 1.10 sqm, pigment 0.462 kgs 0.012 0.258
15.94 15(23.3) Mosaic tiles - 1.10 sqm, white cement- 0.066 bags, 0.01 0.192
pigment 0.55 kgs
15.95 15(23.4) Mosaic tiles- 1.10 sqm, white cement- 0.1 3 bags 0.01 0.12
392
MATERIAL REQUIREMENT DETAILS
Sl. KSRB I Brief Description Unit
No. KSRRB No.
1 2 3 4 5
16.4 24.90 Repairs to Building Sqm Nitric acid - 0.01 ltr/ sqm
16.5 24.10 Repairs to Building Sqm paint remover- 0.07 ltr/sqm, blow, lamp, brushes,
scraper, turpentine oil, putty at 5% on
paint removal cost
16.6 24.11 Repairs to Building Sqm caustic soda - 0.073 kg/sqm, scraper, brushes,
terpentine oil, acetic acid or vinegar,
putty 10% on cost of soda
16.7 24.12 Repairs to Building Sqm Kerosene oil - 0.10 ltr/sqm, scrapper, putty at 5% on
cost of kerosene oil
16.9 24.1 4 Repairs to Building Sqm kerosene oil - 0 .10 ltr/sqm, scraper, putty at 5% on
cost of kerosene oil
16.10 24.15 Repairs to Building Sqm Paint remover- 0.07 ltr I sqm , brushes, scraper,
terpentine oil, putty at 2% on paint removal cost
16.12 24.17 Repairs to Building EACH Honne wood - 0.002 cum I each
16.13 24.18 Repairs to Building EACH mathi I nandi wood - 0.002 cum I each
16.14 24.19 Repairs to Building EACH Sal wood - 0.002 cum/each
16.15 24.20 Repairs to Building EACH Teak wood- 0.005 cum I each
16.16 24.21 Repairs to Building EACH Honne wood - 0.005 cum I each
16.17 24.22 Repairs to Building EACH Mathi I Nandi wood - 0.005 cum I each
16.21 24.26 Repairs to Building EACH M.S. flat 300 mm x 25mm x 3mm- 0.20 kg/each,
screwe, 40mm - 4.00 nos I each
16.22 24.27 Repairs to Building CUM Honne wood, battens including wastage at 2% - 0.12
cum I cum
16.23 24.28 Repairs to Building CUM Mathi I nandi wood batterns including wastage at 2% -
0.12 cum/cum
16.24 24.29 Repairs to Building CUM Sal wood battens including wastage at 2% - 0.12 cum/
cum
393
Sl. KSRB/ Brief Description Unit
No. KSRRB No.
1 2 3 4 5
16.28 24.33 Repairs to Building Metre. Teak wood - 0.0001 cum I meter I
16.29 24.34 Repairs to Building Metre. Honne wood beads including wastages - 0.0001 cum/
metre
16.30 24.35 Repairs to Building Metre. Putty for filling holes- 0.068 kg/metre
16.31 24.36 Repairs to Building Sqm cement- 0.11 qntl/sqm
16.32 24.37 Repairs to Building Sqm cement- 0.11 qntl/sqm
16.33 24.38 Repairs to Building Metre. Cement- 0.01 bag/metre, sand 0.001 cum/metre
16.34 24.39 Repairs to Building Sqm bitument 85/25 grade- 0.045 kg/sqm , sand- 0.001
cum/sqm
16.35 24.40 Repairs to Building Sqm cement- 0.204 bag I sqm , sand 0.02 cum/sqm
16.36 24.41 Repairs to Building Sqm cement- 0.152 bag I sqm, sand - 0.02 cum I sqm
16.37 24.42 Repairs to Building Sqm cement- 0.10 bags I sqm , sand - 0.02 cum I sqm
16.37.2 24.43 Repairs to Building Sqm cement- 0.025 bag I sqm , sand- 0.005 cum I sqm
16.39 24.44 Repairs to Building Sqm cement- 0.20 bags I sqm , sand - 0.02 cum I sqm
16.40 24.45 Repairs to Building Sqm cement- 0.015 bag I sqm , sand - 0.002 cum I sqm
16.41 24.46 Repairs to Building Sqm cement- 0.01 bag I sqm , sand - 0.002 cum I sqm
394
MAERIAL REQUIREMENT DETAILS
Chapter 21
51. Emulsion I
Item No. Bitumen I CRMB
No. Cutback MC 70
1 21 .5 - 1.10 kglsqm
2 21 .6 - 0.60 kglsqm
3 21 .7 0.25 kg -
4 21.9 0.40 kglsqm -
5 21.10.2 0.20 kglsqm -
6 21.11.1 I 21.11.3 I 21 .11.5 0.068 M.Ticum (Density@ 2200kglcum -
7 21 .11.2 I 21.11.6 I 21.11 .8 0.072 M.Ticum (Density@ 2200kglcum -
8 21 .12 0.003 M.Tisqm -
395
MAERIAL REQUIREMENT DETAILS
Chapter 21
51. Emulsion I Cut-
Item No. Bitumen I CRMB
No. back MC 70
30 21 .57 I 21 .58 - -
31 21.64 0.00121 M.T/sqm -
32 21.65 0.000858 M.T/sqm -
33 21.66 0.000527 M.T/sqm -
34 21.67 0.0009 M.T/sqm -
35 21 .68 0.0011 M.T/sqm -
36 21 .69 0.0015 M.T/sqm -
37 21 .70 0.00105 M.T/sqm 0.0987 M.T/cum
38 21 .71 - 0.153 M.T/cum
39 21.72 - 0.1865 M.T/sqm
40 21 .73 - -
41 21 .74.1 I 21.74.2 0.081 M.T/cum- -
42 21.74.3 I 21 .74.4 0.054 M.T/cum -
43 21.77.1 Bitumen- 0.0955 M.T/cum -
Waste Plastic- 8.31 kg/cum
44 21 .77.2 Bitumen- 0.106 M.T/cum -
Waste Plastic- 9.23 kg/cum
45 21.78.1 Bitumen- 0.11 9 M.T/cum -
Waste Plastic- 10.37 kg/cum
46 21.78.2 Bitumen- 0.1 30 M.T/cum -
Waste Plastic- 11 .31 kg/cum
47 21 .79.1 / 21 .79.2 Bitumen- 0.136 M.T/cum Celluous Fibre -
7.07 kg/cum
396
MAERIAL REQUIREMENT DETAILS
Chapter 22
Sl.
Item No. Brief Description of Item Unit Bitumen Cement Steel
No.
CEMENT CONCRETE PAVEMENT
1 22.1 KSRRB M-600-1: Construction of Dry Lean Cum - 160 kg -
Cement Concrete mix M-5
2 22.2.1 KSRRB M-600-2: Construction of Cum - 360 kg -
un-reinforced, dowel jointed, Plain Cement
Concrete Pavement M-30
3 22.2.2 KSRRB M-600-2: Construction of Cum - 420 kg -
un-reinforced, dowel jointed, Plain Cement
Concrete Pavement M-40
4 22.3 KSRRB M-600-3: Construction of Rolled Cum - 180 kg -
Cement Concrete mix M7 .5 OPC Cement
5 22.4 KSRRB M-600-5: Construction of base, Cum - 160 kg -
sub-base mix M5 OPC Cement
6 22.5 KSRRB M-600-6: Construction of Cum - 360 kg -
un-reinforced, dowel jointed, Plain Cement
Concrete Pavement M-30
7 22.6.1 Cement Concrete Pavement: Construction Cum - 360 kg -
of un-reinforced Plain Cement Concrete
Pavement M-30
8 22.6.2 Cement Concrete Pavement: Construction Cum - 300 kg -
of un-reinforced Plain Cement Concrete
Pavement M-20
397
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. of SR
1 2 3 4 5 6 7
BRIDGES
398
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
399
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
33 26.5.2 KSRRB M1200.3.2 ii) -do- with M-25 Cum 340 Kgs -
34 26.5.3 KSRRB M1200-3.3 iii) RCC with OPC cement
design mix M35 Cum 390 Kgs -
35 26.5.4 KSRRB M1200-4.1 : i) PCC design mix M15 with
OPC cement Cum 240 Kgs -
36 26.5.5 KSRRB M1200-4.2 ii) PCC with OPC cement
design mix M20 Cum 300 Kgs -
37 26.5.6 KSRRB M1200-4.3 iii) RCC with OPC cement
design mix M20 Cum 320 kgs -
38 26.5.7 KSRRB M1200-4.4: iv) PCC with OPC cement
design mix M25 Cum 340 Kgs -
39 26.5.8 KSRRB M-1200-4.5 : v) RCC with OPC cement
design mix M25 Cum 340 Kgs -
40 26.5.9 KSRRB M1200-4.6 vi) PCC with OPC cement
design mix M30 Cum 360 Kgs -
41 26.5.10 KSRRB M-1200-4. 7 vii) RCC with OPC cement
design mix M30 Cum 360 Kgs -
42 26.5.11 KSRRB M1200-4.8 viii) RCC with OPC cement
design mix M35 Cum 390 kgs -
43 26.5.12 KSRRB M1200-4.9 ix) RCC with OPC cement
design mix M40 Cum 420 kgs -
44 26.6 KSRRB M 1200-5.1 : Plain I Reinforced cement
concrete, in well foundation complete as per
drawing and technical specification mix M20 Cum 320 kgs -
45 26.7 KSRRB M1200-5.2 : Plain I reinforced cement
concrete, in well foundation complete as per
drawing- M 20 Cum 320 kgs -
46 26.8 KSRRB M 1200-6.1 : Plain/reinforced cement
concrete, in well foundation complete ii) PCC
with OPC cement design mix M25 Cum 340 kgs -
47 26.9 KSRRB M1200-6.2: Plain I reinforced cement
concrete, in well foundation complete mix M25 Cum 340 kgs -
48 26.10 KSRRB M 1200-7.1: Plain/ reinforced cement
concrete, in well foundation design mix M30 Cum 360 kgs -
49 26.11 KSRRB M1200-7.2: Plain/ reinforced cement
concrete, in well foundation complete as per
drawing design mix M30 Cum 360 kgs -
400
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
401
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
402
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
I
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. of SR
1 2 3 4 5 6 7
405
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
406
MATERIAL REQUIREMENTS DETAILS
Sl. Item No.
Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
407
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
408
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
409
MATERIAL REQUIREMENTS DETAILS
Sl. Item No. Brief Description of Item Unit Bitumen Cement Steel
No. ofSR
1 2 3 4 5 6 7
166 27.16 KSRRB M21 00-8. Filling Annular Space Around - 0.240
Footing in Rock Lean cement concrete 1:3:6 M.Ton or
nominal mix cum 240 Kgs -
167 32.2 KSRRB M2700-2. Construction of precast RCC - 0.03069 0.01892 M.T.
railing of M-30 grade Rmt M.Ton or or 18.92 Kgs
30.69Kgs Kgs
410
NEW ITEMS INCLUDED IN S. R. 2016 - 17
51. No. Description Unit Rate
8.31 Providing and laying non-asbestos high impact polypropylene reinforced corrugated
cement roofing sheet reinforced with a blend of strong factory made fibers as per
IS:1 4871 and IS0:9933:1995(E) roofing upto any pitch and fixing with polymer coated
J or L hooks,bolts and nuts 8mm dia,G.I plain and bitumen washers or with self drilling
fastener and EPDM washers etc. complete but excluding the cost of purl ins, rafters and
trusses. Including cutting to size and shape of corrugated sheets wherever required.
and cost of materials, labour, complete as per specifications.
8.31.1 -do- with Natural Grey colour sqm 534.00
24.53 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Yellow No 860.00
coloured flexible prismatic sheeting with non-metallic prismatic lens, formed in a
transparent, synthetic resin, as retroreflective elements mounted on a Aluminum (AI)
foil with a pre-coated pressure sensitive adhesive and easily removable liner,containing
screen printed arrow/slant line pattern in black color in a continuous roll format and the
sheeting shall be extremely flexible and easy to bend or wrap around objects,capable of
exhibiting very high conformability and non-returning dead-fold characteristics required
for application on rough and uneven surfaces. Ten years warranty for the reflectivity
from the original manufacturer shall be submitted by the contractor.
24 .54 Supply & Installation of Flexible Median Markers made of combination of tough , No 335.00
high impact resistant molded thermoplastic body with U shape structure & rebound
property & exposed body structure should be cornered rounded for better aesthetics.
The flexible median marker shall have U shaped florescent yellow color retro-reflective
sheeting with minimum exposed reflective area 75 cm2. The reflective sheeting should
confirm to Type XI Florescent Yellow sheeting as per IRC 67 2012 .The third party
test report for reflective sheeting shall be submitted along with product information.
The product design has to with stand all natural impacts and should not get damaged
if any pedestrian stamp on top of it intentionally or unintentionally. The product should
bend up to 90 degree on both sides (becoming completely horizontal), it should be able
to take minimum 500 stamping without any significant damage. The Flexible Median
Marker shall be fixed by a combination of epoxy adhesive and grouting/Drilling as
recommended by manufacturer. Two years warranty for the reflectivity from the original
manufacturer shall be submitted by the contractor.
24.55 Supply & Installation of Solar Raised Pavement Markers made of polycarbonate molded No 2957.00
body with circular shape, solar powered , LED self illumination in active mode, 360
degree illumination and reflective panels with micro prismatic lens in passive mode
. The marker shall support a load of 20000 kg tested in accordance to IRC 37 and
shall be resistant to dust and water ingress according to IP 65 (Ingress Protection
65 is a test which is conducted to check if solar road stud is protected from total dust
Ingress and low pressure water jets from any direction) standards and should withstand
temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red
or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There
should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging
mode to enhance the life of the marker and a full charge should provide for a minimum
autonomy of 50 hours. The height, width and length of the marker shall not be less than
10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less
than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms.
Fixing will be by drilling holes on the road for the shanks to go inside, without nails
and using epoxy resin based adhesive as per manufacturer's recommendation and
complete as directed by the engineer.Two years warranty for the reflectivity from the
original manufacturer shall be submitted by the contractor.
411
NEW ITEMS INCLUDED IN S. R. 2016 - 17
51. No. Description Unit Rate
24.56 Supply & Installation of Rigid Median Marker made of tough, high impact resistant, No 428.00
injection-molded, thermoplastic body with an isosceles trapezoidal structure of length,
width and height not less than 15cm, 10cm and 10cm respectively and thickness not
less than 1.8mm, the body structure shall be rounded suitably. The plastic used for
molding the Median Marker shall conform to ASTM 0256 . The logo of the manufacturer
shall be embossed on either side of the body in the injection molding process. The
Median Marker shall have rectangular-shaped, fluorescent yellow color retro-reflective
sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro prismatic
cube corners as its retro-reflective elements as per IRC 67 2012. The retro-reflective
sheeting shall be a one or both sides of the Median Marker and shall be edge protected
with no exposed edges which will prevent edge lifting, vandalism, sheeting damage,
etc. The Median Marker shall be fixed by a combination of epoxy adhesive and
grouting.Two years warranty for the reflectivity from the original manufacturer shall
be submitted by the contractor.
24.57 Road Marking with hot Applied Thermoplastic compound with Reflectrising Glass Sqm 647.00
Beads on Concrete Surface:- Providing and laying of hot Applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads at 250 gms and 2Ltr of
Primer per sqm area, thickness of 2.5 mm is exclusive of surface, applied glass beads
as per IRC:35. The finished surface to be level, uniform and free from Streaks and
holes complete as per specifications MORTH Specification No. 803.
38.54 Providing and applying 2 coats of corrosion Inhibition cement slurry on Reinforcement Tonne 1,871.00
bars prepared by mixing of 1 Kg of OPC Cement with 500 CC of Inhibitor solution
of approved quality by dipping or brushing method,the first coat being applied after
cleaning the bars by wire brush or alkaline cleaning powder to remove the rust and
dust, and allowed to air dry for 12-24 hours as the case may be and the second coat
being applied on the fabricated bars before placing in position as per clause 5.3.3
of IS 9077-1 979. The Rate includes cost and conveyance of all materials, labour
charges etc., complete as per the direction of Engineer in-charge.
38.55 Providing and laying self-compacting controlled concrete produced by IS 9001 cum 5,403.00
accredited plants conforming to EN 206-1 M-20 grade, with OPC @ 185 kg/cum
conforming to EN-197-1 GGBS 175 kg/cum , 20 mm to 12.50 mm graded coarse
aggregates@ 865 kg/cum, conforming to EN-12620 obtained from a single source
with a ceiling flakiness index of 5% , M-sand @ 1015 kg/cum, having aggregate
particles finer than 45 microns, limited to 8% (2% for natural sand) and water
cement ratio as per EN 1008, with vertical free fall distance and horizontal flow for
concrete from point of discharge limited to 5m & 1Omts respectively including cost of
all materials, labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per the direction of Engineer-in-charge of work.
38.56 Providing and laying self-compacting controlled concrete produced by IS 9001 cum 6,275.00
accredited plants conforming to EN 206-1 M-25 grade, with OPC @ 255kg/cum
conforming to EN-197-1 GGBS 145 kg/cum, 12.5mm graded coarse aggregates
745kg/cum, conforming to EN-12620 obtained from a single source with a ceiling
flakiness index of 5%, M-sand @ 1065 kg/ cum, having aggregate particles finer
than 45 microns, limited to 8% (2% for natural sand} and water cement ratio as per
EN 1008, with vertical free fall distance and horizontal flow for concrete from point of
discharge limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete as per the
direction of Engineer-in-charge of work.
412
NEW ITEMS INCLUDED IN S. R. 2016 - 17
Sl. No. Description Unit Rate
38.58 Providing and laying self-compacting controlled concrete produced by IS 9001 cum 6,621.00
accredited plants conforming to EN 206-1 M-35 grade, with OPC @ 305kg/cum
conforming to EN-197-1 GGBS 195 kg/cum, 12.5mm graded coarse aggregates
800kg/cum, conforming to EN-12620 obtained from a single source with a ceiling
flakiness index of 5%, M-sand@ 970kg/ cum, having aggregate particles finer than
45 microns, limited to 8% (2% for natural sand) and water cement ratio as per EN
1008, with vertical free fall distance and horizontal flow for concrete from point of
discharge limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries ~tc. , complete as per the
direction of Engineer-in-charge of work.
38.59 Providing and laying self-compacting controlled concrete produced by IS 9001 cum 6,928.00
accredited plants conforming to EN 206-1 M-40 grade, with OPC @ 400kg/cum
conforming to EN-197-1 GGBS 105 kg/cum, 12.5mm graded coarse aggregates
910kg/cum, conforming to EN-12620 obtained from a single source within a ceiling
flakiness index of 5%, M-sand@ 820 kg/cum, having aggregate particles finer than
45 microns, limited to 8% (2% for natural sand) and water cement ratio as per EN
1008, with vertical free fall distance and horizontal flow for concrete from point of
discharge limited to 5m & 1Omts respectively including cost of all materials, labour
charges, scaffolding, curing, hire charges of machineries etc., complete as per the
direction of Engineer-in-charge of work.
38.60 Light gauge steel frame structure (lgsfs) for dry wall panel system KG 174.00
Providing and fixing factory finished custom designed structurally stable, corrosion
resistant, cold formed wall structure, trusses, joists, purlins, connection accessories
etc., made out of0.95 mm thick galvanized steel coils, (AZ-150 gms,Aiuminium-Zinc
alloy coated steel) having minimum yield strength of 550 Mpa, using computerized
cold forming machine to 'C' type sections having a minimum web thickness of 89 mm,
flange width 40 mm with 1Omm lip as per drawings conforming to A lSI specifications
and IBC 2009 for cold formed steel and construction confirming to Indian standards
as per IS: 800-1984, IS: 801-1975, IS:875-1987(Part Ill) and IS:1893, the LGS
frames shall be manufactured using computerized machine duly punched with
dimple, service holes and slots at required location and supplied in assembled state
using self tapping screws with corrosion resistant coating in accordance with ASTM
8633 of specified pitch as per requirements or in a dismantled state , and mounted
I firmly fixed to the existing plinth beam using self expandable carbon steel anchor
bolts, 12 mm dia and 121 mm in length conforming to AISI 304 & 306 standards@
500 mm c/c with a minimum embedment of 100 mm in RCC located at 300 mm from
corners or from bottom LGS frames confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per the
directions of the engineer in charge of the work.
413
NEW ITEMS INCLUDED IN 5. R. 2016 - 17
Sl. No. Description Unit Rate
38.61 providing and fixing with internal and external cement fibre boards/ coir composite Sqm 3,316.00
boards to lgsfs dry wall panel system Providing and fixing for both external and
internal faces of Light Gauge Steel Frame Structure in two layers, sandwiching a
breathable vapour barrier in between layers as per NBC code 2009, with external
face having a 6mm thick heavy duty fiber cement board/coir composite board fixed
on a 9mm thick heavy duty fiber cement board/coir composite board confirming to
IS 14862:2000, Category IV type A or equivalent in standard sizes and internal face
with 12.5mm thick gypsum plaster board/coir composite board fixed on 8mm thick
fiber cement board/coir composite boards confirming to IS 14862:2000 of category
Ill type B (High pressure steam cured) or equivalent ,as per standard sizes with self
drilling tapping screws half counter sunk, rib head of 1.60mm to 4mm thick, 8 to 10
gauge, length varying from 25 to 45mm I fasteners @ 600mm c/c of approved make,
with a staggered vertical joint of 2mm to 3mm sealed with a silicon based sealant and
smooth finished using fiber mesh tape and Epoxy and acrylic based joining
compound for seamless finish and the material and process of manufacture and
assembly/erection confirming to RV-TIFAC Composite Designs and Specifications
including all costs of labour, materials, fabrication , assembling, transportation ,
erection, incidental and unforeseen charges complete as per the directions of the
engineer in charge of the work.
38.62 providing and fixing with eps -weld mesh-cement-sand shotcrete wall panels to Sqm 3,241 .00
lgsfs. Providing and fixing in position factory made expanded polystyrene core (EPS
core) panels 90 mm thick having a density not less than 10 kg per cum . to both faces
of LGSFS FOR WALLS and covered on both sides with welded wire fabric mesh
made of 2.2mm dia Gl wire with 50mm pitch in both the directions, connected by
Gl wire of 3mm dia to the LGS frame structure duly plaster finished with short Crete
plastering/ guniting equipment in required layers, 30mm thick with cement mortar 1:3
{1 cement: 3 coarse sand not having more than 40% stone chips of size upto 6mm}
at a pressure not less than 1 bar (1 00 KN/m2) and both faces finished with trowel
and completed in all respect as per drawings and specifications confirming to RV-
TIFAC Composite Designs and Specifications including all costs of labour, materials,
fabrication , assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.
38.63 providing and fixing with eps -weld mesh-cement-sand shotcrete roof/floor panels to Sqm 3,387.00
lgsfs Providing and fixing in position factory made expanded polystyrene core (EPS
core) panels 90 mm thick having a density not less than 10 kg per cum. to both faces
of LGSFS FOR ROOF/FLOOR PANELS and covered on both sides with welded
wire fabric mesh made of 2.2mm dia Gl wire with 50mm pitch in both the directions,
connected by Gl wire of 3mm dia to the LGS frame structure duly plaster finished
with short Crete plastering/guniting equipment in required layers, 30mm thick with
cement mortar 1:3 {1 cement: 3 coarse sand not having more than 40% stone chips
of size upto 6mm)} at a pressure not less than 1 bar (1 00 KN/m2) and both faces
finished with trowel and completed in all respect as per drawings and specifications
confirming to RV-TIFAC Composite Designs and Specifications including all costs
of labour, materials, fabrication , assembling, transportation, erection, incidental and
unforeseen charges complete as per the directions of the engineer in charge of the
work.
414
NEW ITEMS INCLUDED IN S. R. 2016 - 17
51. No. Description Unit Rate
38.64 Engineered Coir Composite Flush Door Shutter of 30mm Thick. Sqm 2,030.00
Providing and fixing engineered coir composite flush door shutter manufactured
using infill solid core with coir and wood particle blended with high quality polymer
encased with 28mm thick wooden styles and rails all-round the boundary of the
shutter and veneer laminated with non oven coir felt impregnated with high
temperature cure phenol formaldehyde resin of density 800kg/cum with high quality
adhesive processed at 155 Deg.C , using 650 tonnage hot compression moulding
press and all four sides of the door shutter coated with water resistant coating
and whole process of manufacturing confirming to RV-TIFAC Composite Designs
and Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per the
directions of the engineer in charge of the work , but excluding the cost of fixtures
and painting.
38.65 engineered wood plastic composite door frames with cross section of 55 x 11 0 mm Rmt 782.00
Providing and fixing engineered wood door frame of requires size fabricated using
Wood Plastic Composites profiles (WPC) of cross section 55 mm X 110 mm with
a density of 1250-1300 kg/m3, resistant to water, termite, fungal and UV, using
four numbers of L shaped MS or plastic clamps at the corners of the frame to fix
it firmly to form a rectangular shape door frame and provided with six numbers of
260mmx25mmx5mm size z shaped MS flat hold fasts for fixing the door frame in the
wall and the material and process for manufacturing the door frame confirming to RV-
TIFAC Composite Designs and Specifications including all costs of labour, materials,
fabrication, assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in
38.66 engineered wood plastic composite door frames with cross section of 75 x 125 mm Rmt 1,367.00
Providing and fixing engineered wood door frame fabricated using Wood Plastic
Composites profiles (WPC) of cross section 75 mm X 125mm with a density of
1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of
L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a
rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm
size z shaped MS flat hold fasts for fixing the door frame in the wall and the material
and process for manufacturing the door frame confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation, erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work , but excluding the cost of
fixtures and painting.
415
NEW ITEMS INCLUDED IN 5. R. 2016 - 17
51. No. Description Unit Rate
38.67 engineered wood plastic composite window frames with cross section of 55 mm x Sqm 4,282.00
110 mm
Providing and fixing engineered wood window frame fabricated using Wood Plastic
Composites profiles (WPC) of cross section 55 mm X 11 Omm with a density of
1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of
L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a
rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm
size z shaped MS flat hold fasts for fixing the window frame in the wall, MS rods of
12mm dia are provided in window frame as per design and drawings. The material
and process for manufacturing the door frame confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation , erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work , but excluding the cost of
fixtures and painting.
38.68 Providing and fixing in position half paneled window shutters with wood plastic Sqm 2,781 .00
composite styles and rails of 30mm thick, 65mm wide and with 4mm thick reeded
glass panels fixed in the groves provided in the styles and rails and the material and
process for manufacturing the window shutters confirming to RV-TIFAC Composite
Designs and Specifications including all costs of labour, materials, fabrication ,
assembling, transportation , erection, incidental and unforeseen charges complete
as per the directions of the engineer in charge of the work, but excluding the cost of
fixtures and painting.
38.69 Providing and supplying water proofing membrane of size 1 mX 5 m with 6.4 mm Sqm 1,000.00
thick having a puncture resistance of 620 N as per ASTM D 4833 and hydrostatic
pressure resistance upto 70 m as per ASTM D 5385 consisting of Bentonite granuals
weighing 4.80 kg/sqm encased between needle punched non-oven geotextile
covered with HOPE sheet of 200 microns thick and uncovered oven geotextile on
the other side laid over levelling concrete to arrest subsurface water with a staggered
over lapping of 100 mm and with a minimum staggered lapping of 300 mm at the
corners and the laps secured by washer headed mechanical fasteners spaced at
300 mm c/c and the lap joints are sealed with Bento seal of not lessthan 19 mm thick
and the terminated ends of water proofing membrane is covered with aluminium strip
and Bento seal.,complete including the cost of lapping, materials, labour, complete
as per specifications.
41 .0 Energy Conservation Building Code -- --
416
~~~ee>;! ~.$
~~.~
-
: dr.:l~5..r.>~c::Joir.l~11 ~e:m.il. oote
~
c::5~a:bo 2016-17 ~~c:3 ~c::toircl~eJ~ 1-.Jwa- doc::J~a:b
e.)
c::J.B
:o;;
c::J.B71
:o;;
ct.r.J.
700-00 ( .w~ c:ir.lm d.r.Jc:Jc)Ol)li~) 1i~o3 oirclw~lic::t, c::J~d.:l ~~c:3wd ~d ~d ~'OZ!Fb ~o~ li~ ~~
"' Q Cll ....0
~&;,j-
c:m~o ~£;la:bo~om,
~oc::J~F ~~ ~w~li~ (dote)
....0 e.) ~
z3o1i~m
~;!~
20l6-17c:3~ ~~c:3 o~te c::5~a:bd doc::J~a:b ~o~ ~.Bcmc::t~ ~o:5:m~J~c::5 'OZ!a:bFd~ U'Oc::J~c:;:,.Bn~ ~Q~m
~~ ~d~,m ~~ ro.B71~oo ~oo;Yd c::J..Bc:JtiJii~ ~~1-.Jd ~~<;jm11 ~~~z.J31i~.
~ 0 ~ ~ - M ~ ~
doc::J~cm ~o~ ~.Bcmc::t~ ~o:5:m~J~c::5~. ~~ ~m~~a:b doli~ ~~p wc::5o~n~c::t~ c:J~~ ~c:E~~Jf-Jd
~o:5:mo~m. ~owO"U~~om. ro.B71~om WC)M ~c:J,~o ~~11 ~o~ 1i~c:3J, ~~~z.J~c::ir.lc::5F~~n ~ ~J~e:mno.
-" "' Cll "' ~ ~ e
~&;,f-
c:m~o ~£;lcmo~om.
~oc::J~F ~~ 5w~li~ (dote)
....0 e.) ~
z3on~m
417