Académique Documents
Professionnel Documents
Culture Documents
AO
2-way Open/Close Ball Valves DN65...150
Open/Close control in cold and hot water circuits
Applications
For Open/Close cold and hot water circuits in heating
and ventilation systems on the water side.
Technical data
Flow medium Cold and hot water, water with max. 50% volume of glycol
Temp. of medium -5...+100°C
Rated pressure 1600kPa
Leakage rate 0...0.01% Kvs (ANSI Class IV)
(No leakage when ex-factory)
Pipe connector Flanged ISO 7005-2
Differential pressure Pmax DN65...125 350kPa (200kPa for low-noise operation)
DN150 250kPa
Close-off pressure Ps DN65...125 700kPa
Dimensions DN150 400kPa
Angle of rotation 90°
R2..AC 2-way Ball Valve Installation position Upright to horizontal (in relation to the stem)
DN Maintenance
Thread Dimensions [mm] Weight Maintenance-free
mm In Valve
Rp Material
L H [kg]
R209AC/R210AC/R211AC Body GG25, Polyester coated
1 1
15 2" 2"
Ball 70.0 42.0 0.38 Stainless steel
R212AC/R213AC/R215AC
3 Seat
3 DN65...125 RPTFE
R217AC/R218AC/R220AC 20 4" 4" 77.0 44.5 0.48
DN150 TFM1600
R222AC/R223AC/R225AC 25 1" 1"
Shaft 85.0 46.1 0.63 Stainless steel
R229AC/R231AC/R232AC 32 11 4" O-ring
11 " 94.0 49.5 0.84 EPDM
4
Dimensions [mm]
Dimensional drawings Disc for Characterised Control Valve
N-Ød
ØD
H
4-Ø6.5 (65/80)
4-Ø8.5 (100-150)
V8.6 05.2017 • Subject to modification