Académique Documents
Professionnel Documents
Culture Documents
IMCC/ENG/DP/01 RevO
PROCEDURE
Dated:
09.01.2018
For detailed methods relating to these applications, refer to the appropriate manuals and procedures.
All modeled items shall be named in accordance w ith the PDMS/Cad works naming convention . The
PDMS/Cad works administrator will receive the 3D model in CD form or via Internet from Client. An
agreement with the Client/Designers should be made prior to incorporating the administrative and
database settings of the model. Engineering Office shall produce Piping drawings, piping fabrication
isometrics & spool drawings using the current PDMS/Cad works, Spoolgen software. Navis work
software will be used for model review and snap shots for erection support.
The Documentation team is responsible for all documents in accordance with the Dept. Working
Instructions .
The Draftsmen via their Team Leaders/Supervisors shall raise Engineering Queries if and when
required to reso lve any ambiguities or to seek missing information from Clients/Design Contractors
models, drawings and specifications. Client format of this document should be followed . Refer
attached Site Technical Query Form -Attachment- ENG-0 II
Page 7 of 37
Procedure No;
IMCC/ENG/DP/01 RevO
PROCEDURE
Dated:
09.01.2018
Engineering Works Procedure
Example:
Design drawing no.-S ..... . Structural
Design drawing no.-P ..... . Piping
Design drawing no.-M ..... Mechanical
Design drawing no.-E ...... Electrical
(, ~ )· Example:
Design drawing no.-D, Sub-assembly no.-S
A piece marking system shall be set-up to facilitate unique identification of all items related
to fabrication and erection. Shop drawing number for tht: first generated drawing consists of
the design drawing number and digit 3000 for Structural and 5000 for Piping.
Example:
Structural Design drawing no .-3000 (for the first created sheet)
Structural Design drawing no.-300 I (for the second created sheet and so on ... )
Weld map drawing no.-2000 (for the first created sheet)
Weld map drawing no.-2001 (for the second created sheet), and so on.
Page 8 of 37
Procedure No:
/IMcC'\ PROCEDURE IMCC/ENG/DP/01 RevO
Dated:
09.01.2018
Engineering Works Procedure
Fabrication Drawings shall be prepared by the Draftsmen on international 'A' series size sheets in
i • AutoCAD software.
'- ..)
For purchases on behalf of clients such as equipments, arrangements shall be made in conjunction
with Client to approve drawings where necessary .
Page 9 of 37