Vous êtes sur la page 1sur 1

STRAP BEAM DESIGN

Allowble B/C (kN/m2) 200


Distance Between Columns (m) 3.89 COL LOADS- kN
trial e assumed (m) 0.762 SER ULT
Column Depth EXT mm 225 EXT INT EXT INT
Column Depth INT mm 225 503 748 729.35 1084.6

ULT/SER 1.45

R1 kN 625.5
R2 kN 625.5

Action Resultant Distance a in m 1.563915268


Geometric Distance b in m 1.564 -8.47322E-05 Note: Change e assumed as this red area to become as small as possible

B1 required in m 1.788
L1 required in m 1.749
L2/B2 square required in m 1.768

Strap Beam Design

ULT Design Pressure under EXT Footer kN/m2 290


ULT Design Pressure under INT Footer kN/m2 290

EXT Footer Line Load ULT EARTH PRESSURE kN/m 518.60


INT Footer Line Load ULT EARTH PRESSURE kN/m 512.84

First Shear at beam kN 177.67 Check INT Shear at end kN 0 Note: small as possible
Point of Contraflxure distance c in m 1.29

Design Bending Moment kNm -400.39 Check INT BM at end kNm 0 Note: small as possible

Vous aimerez peut-être aussi