Académique Documents
Professionnel Documents
Culture Documents
__________.
a. Architectural
b. Freestyle
cc. Mechanical
d. Rigid
2) To create the number �8� in the correct style you should __________.
3) The style for the letter �I� and the number �1� are often confused. Which of the
following statements is true? __________.
a. A short horizontal line should be at the top and bottom of the letter �I�
b. The letter �I� is shown strictly as a vertical line
c. A flag should be present at the top or the number �1�
dd. Both �b� and �c� are correct
a. Main
b. Maximum
cc. Multiline
d. My
5) If you want to place text at the exact center of a box, you should set the
Justify option to __________.
a. BC
b. EC
cc. MC
d. TC
6) ASCII (American Standard Code for Information Interchange) text with the
standard �txt� file extension can be imported into the MTEXT editor box by
__________.
7) To apply numbers to items listed in the MTEXT editor box, you can __________.
a. select the text and then pick the �Numbered� button in the Ribbon
b. simply type in the number as the text is entered
c. pick a point before each text item and enter the number
dd. All of the above are correct
8) When placing general notes on a technical drawing, you should use the __________
command.
a. TEXT
bb. MTEXT
c. MLINE
d. NOTES
a. multiline text
bb. single-line text
c. general text
d. Both �a� and �b� are correct
2) General notes are normally created with the __________ command and placed in
__________.
3) Labels are normally created with the __________ command and placed in __________
if they should remain directly associated with the model drawing.
aa. TEXT, model space
b. TEXT, paper space
c. MTEXT, model space
d. MTEXT, paper space
4) When using the TEXT command to label a line and you want to place the text
centered and directly above the midpoint of the line, you should activate the
_________ Justify option.
a. TC (Top Center)
b. MC (Middle Center)
cc. BC (Bottom Center)
d. BL (Bottom Left)
5) When using the TEXT command and you want the text to go from left to right
(standard), you should specify the rotation angle of the text to __________
aa. 0
b. 45
c. 90
d. 180
6) When using the TEXT command to create multiple text objects that are not
directly under each other, you __________.
7) When using either the TEXT or MTEXT command, you can enter the code _________ to
create a diameter symbol.
aa. %%C
b. %%D
c. %%P
d. %%U
a. TL (Top Left)
b. ML (Middle Left)
c. BL (Bottom Left)
dd. LEFT
a. Dimension Style
b. Point Style
c. Table Style
dd. Text Style
2) In the Text Style dialog box, entering a Width Factor __________ than 1, will
__________ the text.
a. greater, expand
b. less, compress
c. less, expand
db. Both �a� and �b� are correct
3) In the Text Style dialog box, entering a __________ Oblique Angle will slope the
text __________.
4) If you change the Font for a text style, __________ text created with __________
that are assigned to that style will be automatically updated.
5) If you change the Text Height for a text style, __________ text created with
__________ that are assigned to that style will be automatically updated.
6) To update text to a modified style, you should first __________ and then
__________.
aa. select the text, pick the modified style in the Ribbon
b. erase the text, recreate the text with the modified style current
c. pick the modified style in the Text Style Control Box, select the text
d. Updating is never necessary
7) If text placed in model space must appear at a size of 1/8� on the plot and the
viewport/drawing scale is 1:4, what size should you make the text (the text style
is not annotative)? __________.
a. 1/8�
b. 1/4"
cc. 1/2"
d. 1�
8) If text placed in model space must appear at a size of 1/8� on the plot and the
viewport/drawing scale is 1:4, what size should you make the text (the text style
is annotative)? __________.
aa. 1/8�
b. 1/4"
c. 1/2"
d. 1�
1) Text created with either the TEXT or MTEXT command can be edited by __________.
2) When editing text, pressing the __________ key deletes the letter to the
__________.
a. DELETE, right
b. BACKSPACE, left
c. DELETE, left
dd. Both �a� and �b� are correct
3) Entering the following �TREAT %%UMACHINED%%U SURFACES ONLY�, while utilizing the
TEXT or MTEXT command will __________.
4) If you select text on a drawing and then pick a text style from the Text Style
Control Box in the Ribbon, __________.
5) If you want to verify the spelling for a series of TEXT and MTEXT object, you
should activate the __________ command.
a. CHECK
b. DICTIONARY
cc. SPELL
d. Only MTEXT can be checked for spelling
a. Home
b1. Insert
c. Annotate
d. Layout
a. TEXT
b. NOTE
c. MTEXT
dd. STYLE
4) If the field name is for a date and time, you can use the _________ command to
update the field to the latest information.
a. NEWDATE
b. RENEW
c. UPDATE
d1. UPDATEFIELD
5) If you want to create a custom field name or enter data for a blank field (i.e.
Author), you should open the appropriate dialog box by selecting the __________.
1a. Application Menu button, then Drawing Utilities, and then Drawing Properties
b. Insert tab, then the Field panel, and the Data button
c. Quick Access Toolbar Field button
d. Application Menu button and then the Update Field button
1) The TABLE command can be selected from the __________ tab of the Ribbon.
a. Annotate
b. Home
c. Insert
1d. Either �a� or �b� is correct
2) Once you pick in a cell of a table, grips are provided. Select the __________
shaped grip to perform an Auto-Fill operation.
a. arrow
b. circular
c1. diamond
d. square
3) Just as with the MTEXT command, you can exit the TABLE command by __________.
4) To merge a group of horizontal cells in a table, you first hold down the
__________ key to select multiple cells and then you select the Merge Cells and
__________ buttons.
5) In a standard table, the first row contains the __________, the second row the
__________, and the remaining rows the __________.
a. STYLE
b. STYLETABLE
cc. TABLESTYLE
d. TABLE
2) In a table style, if you change the Table Direction from �Down� to �Up�, the
__________ will be placed at the bottom of the table.
aa. Title
b. Data
c. Headers
d. There is no such option