Académique Documents
Professionnel Documents
Culture Documents
Typical properties
Applications
Binder for the manufacture of non-yellowing masonry paints, impregnations, concrete coatings, synthetic resin
plasters, road marking paints and aerosol paints.
Film drying:
Dries physically by solvent evaporation.
Solubility:
DEGALAN® P 675 is soluble in most paint solvents like esters, ketones, aromatics, glycol ethers, glycol ether
acetates, alcohols and white spirit with a minimum content of aromatics of 18 %. Phase separation may occur
when solutions of DEGALAN® P 675 in petroleum hydrocarbons or in mixtures of petroleum hydrocarbons and
chloroparaffin plasticizers are stored at low temperatures. Stirring under heat solves the problem and has no
influence on the film properties.
Compatibility:
DEGALAN P 675 is compatible with DEGALAN P 550 and DEGALAN P 28 as well as with most plasticizers
and chloroparaffins. It is compatible with alkyd resins.
Evonik Resource Efficiency GmbH Evonik Degussa Corporation Evonik Degussa (China) Co., Ltd.
Kirschenallee 299 Jefferson Road 55 Chundong Road,
64293 Darmstadt Parsippany, Xinzhuang Industry Park Product Information
Germany NJ 07054 USA Shanghai 201108, China
PHONE +49 6151 18-4716 PHONE +001 973 929-8000 PHONE +86 21 61191-027
24.02.2015
DEGALAN P 675 e
FAX +49 6151 18-4955 FAX +86 21 61191-534
Page 1/2
General remarks
Typical properties are approximate reference values. If you need product specifications please contact us.
® = registered trademark
DEGALAN is a registered trademark of Evonik Röhm GmbH, Darmstadt, Germany.
This information and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other legal responsibility on
our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or
guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further
developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described
herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used
by other companies is neither a recommendation, nor does it imply that similar products could not be used.
Product Information
24.02.2015
DEGALAN P 675 e
Page 2/2