Académique Documents
Professionnel Documents
Culture Documents
Step 1: Connecting your Reader to the Computer Step 2: Installing the Reader Software Step 4: Join a Wi-Fi Network CASE A: A WPS-compatible Wi-Fi router with WPS button CASE D: Connecting to an available Wi-Fi network
1. Connect your Reader to the computer with the supplied USB cable. Your Reader must be configured to connect to a Wi-Fi network for a Note: Make sure that your Reader shows the [Wi-Fi Settings] screen. Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
To install on Windows computers:
The Reader will turn on automatically and while connecting to the wireless Internet access. Otherwise, follow the steps under COMMON INSTRUCTIONS first. Otherwise, follow the steps under COMMON INSTRUCTIONS first.
computer, the Reader will start charging. From your computer, click on the “Start” menu “Computer” (“My INTERNET 1. Tap [WPS Push-Button Configuration].
Computer” for Windows XP users) double-click the “SETUP” drive Check if the available Wi-Fi network requires a username and a password.
2. Tap [Start]. A password may be also called a WEP key/WPA key/encryption key/
Quick Start Guide
double-click “Setup Reader for PC”.
INTERNET 3. Press the WPS button on your Wi-Fi router within 2 minutes. network key, or similar.
To install on Mac computers: 1. Tap [Scan] to show a list of all available Wi-Fi networks.
4. After your Reader screen shows the setup completion, tap [OK].
Guide de When the Reader is connected to your Mac, the “SETUP” and “READER”
drives will appear on the desktop. Double-click the “SETUP” drive
double-click “Setup Reader for Mac”.
CASE B: A WPS-compatible Wi-Fi router with PIN Input
2. Find and tap your Wi-Fi network SSID (Service Set Identifier) in the [Wi-
Fi Networks] list.
Touchscreen
démarrage Note: Make sure that your Reader shows the [Wi-Fi Settings] screen. 3. If prompted for a password, tap the input area and type in the
Charge/Busy indicator Follow the on-screen instructions to complete the installation of the Reader password using the on-screen keyboard.
Otherwise, follow the steps under COMMON INSTRUCTIONS first.
Connect to your computer software. 1. Tap [Add Wi-Fi Network]. 4. Tap [Connect].
2. Tap [WPS PIN Method]. 5. The [Browser] application may start automatically. Otherwise, start the Page Turn
Note Step 3: Shop at the Reader Store browser application manually; press the (Home) button, tap
Ifthe ambient temperature is too cold or too hot for the Reader to charge, First, follow the COMMON INSTRUCTIONS below, then refer to your 3. Tap [Start]. A PIN (Personal Identification Number) will be shown on the Home
case for further instructions. [Applications] and tap [Browser].
adjust the room temperature to between 5 °C and 35 °C, disconnect and Shop using your computer screen of your Reader.
6. The browser screen may show further information to complete the Back
reconnect the USB cable. 4. Enter the PIN into your Wi-Fi router. Please refer to your Wi-Fi router’s
You can access the Reader Store from your computer. COMMON INSTRUCTIONS connection. Follow any instruction(s) where applicable. Menu
instruction manual for further details.
Tip To read purchased books with Adobe DRM (Digital Rights Management)
5. After entering the PIN tap [OK]. After a moment, the Reader connects
The Charge/Busy indicator will light up in red while charging. It may take up to protection, you need to authorize your computer and Reader using the 1. Tap [Applications] [Settings] [Wireless Network Settings] on your Manually setting a Wi-Fi connection
Reader software. Reader. to the wireless network automatically.
2.5 hours to fully charge.
2. Turn on Wi-Fi by tapping [Wi-Fi]. Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
Until the Reader becomes ready, the Charge/Busy indicator may blink in red 3 Follow the on-screen instructions to authorize your computer and the
Reader. CASE C: Connecting to a Wi-Fi router without WPS support Otherwise, follow the your Wi-Fi router’s COMMON INSTRUCTIONS first.
microSD
times if the (Power) button is pressed. 3. Tap [Wi-Fi Settings] to show the [Wi-Fi Settings] screen.
To use the Reader while it is charging from a fully-depleted battery, the AC An Internet connection is required to your computer. 1. Tap [Add Wi-Fi Network]. card slot
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
adapter PRSA-AC10 or PRSA-AC1A (sold separately) is recommended. Your personal content can be transferred onto your Reader via the Reader The following questions will determine the most suitable case for Otherwise, follow the steps under COMMON INSTRUCTIONS first. 2. Tap [Manual Registration].
When the computer is in sleep mode or powered off, disconnect the USB cable software. connecting your Reader to a Wi-Fi network. 3. Tap the [SSID] input area and type in using the on-screen keyboard.
from the Reader to retain the charge in the battery. For details on how to use the Reader software, refer to the [Help] menu of Check if the Wi-Fi router to be connected requires a password. A password
NO may also be called a WEP key/WPA key/encryption key/network key, or 4. Tap the [Security Method] menu (default value is [Open]) and tap the
There are two instruction guides provided for your reference. Please the Reader software. 1. Are you using a home Wi-Fi connection? Case D
2. Perform initial settings on the Reader. similar. supported security type.
review this Quick Start Guide. For more detailed information, the User
Set [Menu Language], [Country / Region], and [Date & Time Settings] 5. Tap [Save].
Guide can be found in [Bookshelves] [Books] on the [Home] Note YES 1. Tap [Scan] to show a list of all available Wi-Fi networks.
from the options displayed.
screen of your Reader™. When a Wi-Fi connection is established, you can also purchase items from the 2. Find and tap your Wi-Fi router’s SSID (Service Set Identifier) in the [Wi- 6. Tap the saved network SSID in the [Wi-Fi Networks] list on the [Wi-Fi
When the settings are completed, [Do you want the computer to NO
Deux guides d’utilisation vous sont fournis à titre de référence. Reader. 2. Is your Wi-Fi router WPS* compatible? Case C Fi Networks] list. Settings] screen. Charge/Busy indicator
recognize this device?] appears on your Reader.
Veuillez consulter ce Guide de démarrage. Pour en savoir plus, vous Tap [Yes] to install Reader for PC™ or Reader for Mac™ application, or [Reader Store] application may be found on the Home screen. Tap [Reader Store]
3. If prompted for a password, tap the input area and type in the 7. If prompted for a password, tap the input area and type in the Power button
icon and follow the on-screen instructions to purchase and download the content of YES password using the on-screen keyboard. (Press to turn on/off)
trouverez le Guide de l’utilisateur dans [Étagères de livres] [Livres] transfer content. password using on-screen keyboard.
Tap [No] to use Reader independently of the computer. Charging will your choice. NO 8. Tap [Connect].
sur l’écran [Accueil] de votre Reader™. 3. Does your Wi-Fi router have a WPS button? Case B 4. Tap [Connect].
continue while the USB cable is connected. [Reader Store] application may not appear depending on chosen country or region. Micro USB connector
The message [Do you want the computer to recognize this device?] will display The stylus packaged with the Reader may be used for more convenient
Case A touchscreen operation.
when a USB cable connection is established.
For USA, Canada and Australia, after setting [Country / Region], you should set
To open the application screen, tap the on-screen page icon
[Time Zone] before [Date & Time Settings]. [Applications].