Académique Documents
Professionnel Documents
Culture Documents
MONITORING SYSTEM
MODULE
SPECIFICATIONS Page 1 of 3
No entry if additional
Model Code / Additional Spec. Code ( spec, code is not specified. )
Install location Communication port Non-incendive Custom setup Tropical spec. Option
C1 Port A : Fieldbus (Modbus/TCP)
1 1 1 Class I Division 2 CSA 0 ・IP address setup
(Upper position) Port B : Blank
C2 Port A : Fieldbus (Modbus/RTU) ・IP address setup
2 2 1
(Lower position) Port B : Blank ・Customize work 1ch to 10ch
Port A : Analysis software communication (TCP/IP) ・IP address setup
3 2
Port B : Blank ・Customize work 11ch to 20ch
Port A : Fieldbus (Modbus/RTU) ・IP address setup
4 3
Port B : Fieldbus (Modbus/TCP) ・Customize work 21ch to 30ch
Port A : Fieldbus (Modbus/TCP) ・IP address setup
5 4
Port B : Analysis software communication (TCP/IP) ・Customize work 31ch to 40ch
Port A : Fieldbus (Modbus/RTU) ・IP address setup
6 5
Port B : Analysis software communication (TCP/IP) ・Customize work 41ch to 50ch
・IP address setup
6
・Customize work 51ch to 66ch
Specification
31108E1.4
Issued Nov. 2011
Revised Sep. 2013
VM-7 VM-742B NETWORK COMMUNICATION
MONITORING SYSTEM
MODULE
SPECIFICATIONS Page 2 of 3
Specification
ENVIRONMENTAL CONDITION
! WARNING
Operating temperature : 0 to +65°C
Some functions may not be available with old version.
Storage temperature : -30 to +85°C For details, please refer to "infiSYS Family Improvement
Relative humidity : 20 to 95%RH (non-condensing) Information January 2013" (no. : 11205E).
POWER CONSUMPTION
Module alone : Less than 15W
Default Value
Slave ID : 2
Baud rate : 9600bps
Data length : 8bit
Parity : NONE
Stop bit : 1bit
31108E1.4
Issued Nov. 2011
Revised Sep. 2013
VM-7 SERIES VM-742B NETWORK COMMUNICATION
MONITORING SYSTEM
MODULE
SPECIFICATIONS Page 3 of 3
Module Location
Slot C1
(Upper position)
Slot C2
(Lower position)
1 NETWORK 1A
2 IN1
3 OUT1
4 NETWORK 1B
5 NETWORK 2A
6 IN2
7 OUT2
8 NETWORK 2B
31108E1.4
Issued Nov. 2011
Revised Sep. 2013