Académique Documents
Professionnel Documents
Culture Documents
Electronic Components,
Modules and Systems
www.global.tdk.com · www.epcos.com
Superior Solutions
for a Smart World.
Magnetics 4
• Transformers 4 • Signal EMC Filters 16
• Power Inductors 7 • Power EMC Filters and Chokes 21
• Signal Use Inductors 12 • Ferrites 23
• Multilayer Inductors 14 • Noise Suppressing Sheets 26
SAW Components 27
• MEMS Devices for Mobile Communications • SAW Filters, Duplexers and Modules
and Information Technology 27 for Cellular Communications 29
• SAW Filters, Duplexers for Base Stations, Small Cells, • Modules for Information Technology 30
Femto Cells and Trunked Radio 27 • Ceramic and Thin-Film RF Components 30
• SAW Filters for Automotive and Industrial 28 • LTCC Substrates for LED 34
• SAW Filters for Multimedia 28
Micro Modules 35
• Bluetooth V4.0 Smart Single Mode Module 35
Sensors 47
• NTC Sensors 47 • Humidity Sensors 51
• Pressure Sensors 50 • Applied Sensors 52
Ceramic Capacitors 54
• Multilayer Ceramic Capacitors 54 • Ultra-High Voltage Capacitors 57
• Leaded Ceramic Capacitors 57
Film Capacitors 58
• Medium Power Film Capacitors 58 • PFC Capacitors and Key Components
• DC Link, DC Filtering Film Capacitors 61 for Power Quality Solutions 63
• AC Output/Input Filters 61 • Power Capacitors 65
• AC Film Capacitors 62
Magnets 70
• Ferrite Magnets 70 • Rare Earth Magnets 71
Wireless Charging 76
• Important Notes 77
Magnetics
Transformers
Transformers
Series EP6 shielded – SMD EHR – SMD EP7 – SMD EP13 – SMD
Features – High turn ratio – High saturation currents – Low leakage inductance – Compact design
– Low leakage inductance – Low leakage inductance – Compact design – Very low THD
– High frequencies – High frequencies – Supplementary/ – Supplementary/
– Insensitive to external – AEC-Q200 approved reinforced insulation levels reinforced insulation levels
fields
– AEC-Q200 approved
Applications Park Distance Control Xenon lights Power supplies Power supplies
units (PDC) LED headlights Power over Ethernet (PoE) Power over Ethernet (PoE)
Piezo fuel injection systems
Transformers
Features – Low stray inductance – Pin-to-Hole (PTH) – Standard designs in SMD – Basic isolation
– High power density – High creepage distance – Three different sizes – AEC-Q200 approved
– High operating – High dielectric strength available
frequencies – Types with 8 mm creepage – Very low DC resistance,
and clearance distance losses and high reliability
available – Ruggedness and simple
implementation
– Customized designs
Applications Power supplies Power supplies Compact DC/DC converters Electric car applications
DC/DC converters for midrange power (xEV)
TDK EPCOS
Transformers
Applications Electric car applications (xEV) Electric car applications (xEV) General purpose isolated AC/DC,
DC/DC converters
Transformers
Features – Low profile SMT packages – Pin terminal type – Pin terminal type (Resonant type,
– Industry standard footprints (for multiple outputs) Through-hole)
– Customized designs – Downsized – Low height (15 … 31.5 mm)
– Compliant with worldwide safety – High power in compact dimensions
standards – Supports automatic winding
– Supports automatic winding
– Reduced characteristic variations
– Halogen-free
Applications DC/DC converters (isolated buck) Switching power supplies Switching power supplies
Power over Ethernet (PoE)
TDK EPCOS
Transformers
Technical Vertical type For multiple outputs (vertical type) Power: 75 … 300 W
data Power: 160 … 250 W Power: 51 … 83 W Frequency: 50, 65 kHz
Frequency: 100 kHz Frequency: 50 … 100 kHz Inductance: 150 … 600 µH
Number of outputs: 2 Operating temp: –30 … +120 °C Rated peak current: 2.4 … 11.1 A
Turn ratio: 9.0 … 10.8 Np/Npd
For multiple outputs (horizontal type) Operating temp.: –30 … +120 °C
Power: 58 … 72 W
Frequency: 50 … 100 kHz
Operating temp: –30 … +120 °C
Features – Pin terminal type (Resonant type, – Pin terminal type for multiple outputs – Pin terminal type
Through-hole) – New high B, low loss PC47 material – Low height (15.5 … 27 mm)
– Low height (15 … 16 mm) – Adopts new EGG cores developed – High current in compact dimensions
– High power in compact dimensions for power transformers
– Supports automatic winding – Ideal for small, multiple output
switching power supplies
– Perfect balance between core
volume
Applications Switching power supplies Switching power supplies General purpose isolated AC/DC,
DC/DC converters
Transformers
Features – Multi-functional DC/DC transformers – High flux density cores have been – High flux density cores have been
– Can be used as inductors (coupled, adopted to achieve miniaturization adopted to achieve miniaturization
step-down, step-up, resonance) – Dielectric strength voltage is 2.6 kV – Maximum 30 Arms can be measured
or DC/DC transformers (flyback,
forward, push-pull)
– Available in four types
Applications POL (Point of Load) DC/DC converters, Automotive: IPM drive of the motor Automotive: Switching current
Digital consumer electronics inverter. detection in on-board DC/DC
converters and chargers
TDK EPCOS
Transformers
Features – Small size enables a reduction of mounting surfaces – Compatible with 10BASE-T, 100BASE-TX, and
– Stable charging characteristics 1000BASE-T
– High reliability – High-quality product with automatic winding
TLA8T105:
Operating, storage temperature: –40 … +85 °C
Withstanding voltage ERMS: 100 V (60 s)
TDK EPCOS
Power Inductors
Power Inductors
TDK EPCOS
Power Inductors
Series General use – SMD Automotive general use – SMD General use – SMD
CLF-NIT series CLF-NIT-D series VLCF series
Technical Size: 3020 … 12577 Size: 3020, 12577 Size: 4018 … 5028
data Inductance: 1.0 … 470 µH Inductance: 1.5 … 470 µH Inductance: 1.2 … 470 µH
Rated current: 1.9 … 10.6 A Rated current: 370 mA … 8.9 A Rated current: 140 … 2710 mA
Temperature: up to +150 °C
Features – General use for portable – High rated DC current – General use for portable DC/DC
DC/DC converter line – High reliability with welding converter line
– High magnetic shield construction connection – High magnetic shield construction
actualizes high resolution for EMC – Ferrite shielded component
protection
Applications Consumer electronics Automotive (generic automotive DC/DC converters for communication
DC/DC converter line) Consumer electronics
PCs
Power Inductors
Series General use flat wire type – SMD Automotive flat wire type – SMD General use – SMD
VLM series VLM-D1 series SPM series
Features – Low loss and large current capability – Low loss and large current capability – High power handling capability:
design – High magnetic shield construction Small copper loss
– High magnetic shield construction actualizes high resolution for EMC Using large saturation induction of
– Magnetic coupling type core with protection Fe-based metals
low magnetic flux leakage and a – High Curie temperature of about
three-terminal structure 550 °C means low inductance
temperature variance
Applications Mobile communications Automotive (ECM, HID, brake control, Mobile communications, consumer
Consumer electronics navigation system and ECU) electronics, servers, VRM
PCs
HDDs
TDK EPCOS
Power Inductors
Series Automotive – metal composite High current – SMD Thin-Film – metal composite
core technology – SMD VLB series core technology – SMD
SPM-PT series TFM-GHM series
Technical Size: 6530 … 12580 Size: 7050 … 12065 Size 2016 … 2520
data Inductance: 0.25 … 22 µH Inductance: 90 … 360 nH Inductance: 0.47 … 2.2 µH
Rated current: up to 28.6 A (22 µH) Rated current: 14 … 68 A Rated current: 2.6 … 4.8 A
Temperature: up to +150 °C Temperature: –40 … +125 °C
Features – High rated DC and excellent – High output processing capacity: – Low height of 1.0 mm
saturation current Minimal copper loss – Superior DC-bias characteristics
– High reliability with welding – High saturation current and low – Consists of original fine copper
connection DC resistance pattern with micro-processing
– High operating frequency technology
up to 2 MHz – Coil pattern coated with metal
magnetic material
Applications Automotive (DC/DC converter, Servers Generic use for DC/DC converter of
EMC filter applications) Notebooks mobile communication devices
PCs
VRMs
VRDs
Power Inductors
Series Semi-shielded – SMD Small size, low profile, semi-shielded – Small size, low profile – SMD
VLS-EX series SMD VLF-MT series
VLS series
Technical Size: 5040 … 6045 Size: 2010 … 4012 Size: 2520 … 5040
data Inductance: 1 … 680 µH Inductance: 0.47 … 47 µH Inductance: 0.47 … 22 µH
Rated current: 0.3 … 9.4 A Rated current: 0.31 … 2.75 A Rated current: 0.26 … 3.72 A
Features – General use for portable DC/DC – General use for portable – DC/DC converter with topclass
converter line DC/DC converter line voltage conversion efficiency
– High magnetic shield construction – Low profile
actualizes high resolution for EMC – Generic use for portable DC/DC
protection converter
– High magnetic shield construction
TDK EPCOS
Power Inductors
Series Multilayer technology – SMD Small size, low profile, Small size, low profile,
MLP, MLP-V series semi-shielded, metal core – SMD semi-shielded – SMD
VLS-HBX series VLS-CA series
Technical Size: 1005 … 2520 Size: 2016 … 2520 Size: 2010 … 4012
data Inductance: 0.47 … 10 µH Inductance: 0.24 … 2.2 µH Inductance: 0.47 … 47 µH
Rated current: 0.6 … 2.3 A Rated current: 1.9 … 4.6 A Rated current: 0.31 … 2.75 A
Temperature: –40 … +105 °C
Features – Most suitable for power lines with – General use for portable – General use for portable
low output DC/DC converter line DC/DC converter line
– Optimized ferrite materials enables – High magnetic shield construction – High magnetic shield construction
the reduction of losses actualizes high resolution for EMC actualizes high resolution for EMC
– DC superposition characteristics protection protection
have been substantially improved
Power Inductors
Series Small size, low profile – SMD Multilayer technology – SMD Multilayer technology – SMD
VLF-MT-CA series MLD series MLP-W series
Features – DC/DC converter with topclass For compact DCDC converters – Small size; height of 1.0 mm
voltage conversion efficiency – Most suitable for power lines with – Optimized ferrite materials enables
– Low profile low output the reduction of losses
– Generic use for portable DC/DC – Optimized ferrite materials enables – DC superposition characteristics
converter the reduction of losses have been substantially improved
– High magnetic shield construction
TDK EPCOS
Power Inductors
Features – Wide inductance range – High rated current – High resonant frequency
– Suitable for wave soldering – Low DC resistance – Suitable for wave soldering
– Suitable for wave soldering
Applications LF and HF decoupling of signal and DC-DC converter RF blocking and filtering
control units Filtering of supply voltages Interference suppression in small
Lighting technology RF blocking and filtering appliances
Industrial, automotive, entertainment Decoupling and interference Decoupling in telecommunication
electronics surpression and entertainment electronics
Household appliances Telecommunications
LED and energy-saving lamps
Entertainment electronics
Series SIMID 0603-C – SMD SIMID 0805-F – SMD SIMID 1210-H – SMD
B82496C … B82498F … B82422H …
Technical Size (EIA): 0603 Size (EIA): 0805 Size (EIA): 1210
data Inductance: 1 … 220 nH Inductance: 2.7 … 6800 nH Inductance: 1.0 … 680 µH
Rated current: 110 … 1800 mA Rated current: 80 … 1000 mA Rated current: 61 … 1150 mA
Temperature: up to +150 °C Temperature: up to +150 °C
Features – High resonance frequency – Ceramic and ferrite core versions – Very high current handling capability
– Narrow inductance tolerances – High resonance frequency – Qualified to AEC-Q200
– High mechanic stability – Narrow inductance tolerance
– Qualified to AEC-Q200 – Ceramic core version qualified to
AEC-Q200
TDK EPCOS
Series SIMID 1210-100 – SMD SIMID 1812-T/C – SMD SIMID 2220-T – SMD
B82422A … B82432T …, B82432C … B82442T…
Technical Size (EIA): 1210 Size (EIA): 1812 Size (EIA): 2220
data Inductance: 0.0082 … 100 µH Inductance: 1 … 1000 µH Inductance: 1 … 10 000 µH
Rated current: 65 … 800 mA Rated current: 55 … 1300 mA Rated current: 46 … 3510 mA
Temperature: up to +125 °C Temperature: up to +150 °C Temperature: up to +150 °C
Features – High resonance frequency – High current handling capability – Very high current handling capability
– High Q factor – High Q factor – High inductance values
– Qualified to AEC-Q200 – Qualified to AEC-Q200 – Qualified to AEC-Q200
Applications Filtering of supply voltages, coupling, Filtering of supply voltages, coupling, Filtering of supply voltages, coupling,
decoupling decoupling decoupling
Antenna systems DC/DC converters DC/DC converters/power supplies
Automotive electronics Antenna systems Automotive electronics
Telecommunications Automotive electronics Telecommunications
Consumer and information technology Telecommunications Consumer electronics
Industrial electronics Industrial electronics Industrial electronics
Series X/Y Transponder coils – SMD Z Transponder coils – SMD X/Y Transponder coils
B82450A …, B82450H … B82451N … TPL602727 series
Technical Size 8 mm: B82450A … E … Size: 7.7 x 7.5 x 2.65 mm Size: 5.85 x 2.7 mm
data Size 11 mm: B82450A … A … Inductance: 2.36 … 7 mH Inductance: 7.2 mH (125 kHz)
High Q 11 mm: B82450H … A … Sensitivity: 16 mV/µT Inductance tolerance: ±3%
Inductance: 1 … 7 mH DC resistance: 118 V
Sensitivity: 10 … 51 mV/µT
Features – Rugged construction for high – Rugged construction for high me- – Terminal fitting structure
mechanical stability when exposed chanical stability when exposed to – “Thin wire bank” winding structure
to shock, drop and bending tests shock, drop and bending tests – Laser welding wire connection
– High Q version available – Qualified to AEC-Q200 – Higher heat resistance wire
– Low profile version available – AEC Q200 compliant
– Qualified to AEC-Q200
Applications Car access systems Passive Entry Passive Start (PEPS) Receiving LF antenna coils for in-car
Immobilisers devices
Passive Entry Passive Start (PEPS) Tire Pressure Monitoring System
Tire Pressure Monitoring System (TPMS)
(TPMS) Keyless entry systems
Heart rate monitoring devices Immobilisers
Goods tracking systems
TDK EPCOS
Series For standard circuits – SMD For standard circuits – SMD For decoupling circuits – SMD
NL(V) series NLFV/NLFC series NLC(V) series
Technical Size: 2520 … 5650 Size: 2520 … 4532 Size: 2520 … 5650
data Inductance: 0.01 … 10 000 µH Inductance: 1 … 1000 µH Inductance: 0.1…1000 µH
Rated current: 25 … 530 mA Rated current: 20 … 800 mA Rated current: 70 … 2850 mA
Features – Good heat durability that withstands lead-free compatible reflow soldering conditions
– Lead-free material is used for the plating on the terminal
– Metal terminals provide excellent connection reliability
– Highly heat-resistant thermoplastic resin is used to form the exterior package
Multilayer Inductors
Series High frequency for standard circuits – High frequency – High Q – SMD High frequency – High Q – SMD
SMD MLG-Q series MLG-P series
MLG, MLG-S series
Technical Size: 0603 … 1608 Size: 0402 Size: 0603
data Inductance: 0.3 … 1000 nH Inductance: 0.2 … 33 nH Inductance: 0.6 … 120 nH
Rated current: 50 … 1000 mA Rated current: 120 … 350 mA Rated current: 80 … 1000 mA
Temperature: –55 … +125 °C Temperature: –55 … +125 °C
Features – Advanced monolithic structure is – Optimal product for fine-pitch – Q is higher than in a conventional
formed using multilayering and circuits product; particulary at more than
sintering process with ceramic 800 MHz
and conductive materials for high
frequency
Applications High frequency applications such as mobile communication, high-frequency modules (PA, VCO, FEM),
Bluetooth, WLAN, UWB and tuners
TDK EPCOS
Multilayer Inductors
Series High frequency – SMD High frequency – Super High Q – SMD Signal line – Narrow tolerance – SMD
MLK series MHQ series MLF-J series
Technical Size: 0603 … 1005 Size: 0402 …1005 Size: 1608, 2012
data Inductance: 1 … 330 nH Inductance: 1 … 150 nH Inductance: 0.1 … 12 µH
Rated current: 70 … 500 mA Rated current: 400 … 1200 mA Rated current: 10 … 300 mA
Features – Giga-spiral laminated structure – Achieves high Q characteristics – Inductance tolerance ±5%
– High self-resonant frequency equivalent to an air-core wire wound (J-tolerance)
– Limited decrease of Q in the inductor – Temperature stress (drift variance
GHz band – Inductance is provided in small percentage) for soldering ±3%
increments, taking advantage of the
multilayer technique
Applications High frequency applications such as mobile communications, high-frequency Signal processing in mobile
modules (PA, VCO, FEM), Bluetooth, WLAN, UWB and tuners communications, car audio, tuners,
DVC
Multilayer Inductors
Series Signal line for standard circuits – For decoupling circuits – SMD
SMD MLZ, MLZ-H series
MLF, MLF-L series
Technical Size: 1005 … 2012 Size: 1005 … 2012
data Inductance: 0.047 … 100 µH Inductance: 0.1 … 100 µH
Rated current: 2 … 300 mA Rated current: 30 … 1000 mA
Features – Magnetically shielded configuration suitable for – Industry’s best DC superimposition characteristics
high-density mounting – Lowest DC resistance
– Excellent effect mainly on the decoupling of
power circuits
– Also suitable for audio lines, due to its low
DC resistance
Applications Signal processing modules for mobile communications Modules for mobile communications and consumer
and tuners electronics
TDK EPCOS
Series Common-mode filters for CAN bus, Common-mode filters for CAN bus, Common-mode filters for BroadR-
FlexRay – SMD FlexRay – SMD Reach / 2-wire ethernet
ACT1210 ACT45B, ACT45C, ACT45R series ACT1210L
Technical Size (EIA): 1210 (3.2 x 2.5 mm) Size (EIA): 1812 (4.5 x 3.2 mm) Size (EIA): 1210 (3.2 x 2.5 mm)
data Rated inductance: 11 … 100 µH Rated inductance: 11 … 100 µH Inductance: 100 and 200 µH
Impedance: 300 … 5800 V (10 MHz) Impedance: 300 … 5800 V (10 MHz) Rated current: 70 … 0.15 mA
Rated current: 0.15 … 0.25 A Rated current: 0.15 … 0.25 A Temperature: –40 … +125 °C
Temperature: –40 … +150 °C Temperature: –40 … +150 °C
Temperature: –40 … +125 °C (ACT45C)
Features – ACT1210 for CAN and FlexRay – ACT45B/C for CAN-Bus – ACT1210L for BroadR-Reach
– Non-soldered internal construction – ACT45R for FlexRay – Provides excellent balance
provides excellent heat resistance – Non-soldered internal construction parameter (symmetry)
to ensure effective circuit board provides excellent heat resistance – Non-soldered internal construction
mounting to ensure effective circuit board provides excellent heat resistance
– Robust lead frame termination mounting to ensure effective circuit board
– Qualified to AEC-Q200 – Robust lead frame termination mounting
– Suitable for lead-free soldering – Qualified to AEC-Q200 – Robust lead frame termination
profiles acc. to JEDEC J-STD 020D – Suitable for lead-free soldering – Qualified to AEC-Q200
profiles acc. to JEDEC J-STD 020D – Suitable for lead-free soldering
profiles acc. to JEDEC J-STD 020D
Applications Automotive electronics: CAN/FlexRay Automotive electronics: CAN/FlexRay Automotive electronics: CAN/FlexRay
bus on space critical applications bus bus on space critical applications
Series Common-mode filters for BroadR- Data line chokes – SMD Data line chokes – SMD
Reach / 2-wire ethernet SIMDAD 1812 B82793C0…, B82793S0…
ACT45L B82789C0…, B82789S0…
Technical Size (EIA): 1812 (4.5 x 3.2 mm) Size (EIA): 1812 Size: 9 x 6 x 4.8 mm
data Inductance: 100 and 200 µH Rated inductance: 11 … 100 µH Rated inductance: 5 µH … 47 mH
Rated current: 100 mA Rated current: up to 300 mA Rated current: up to 1.2 A
Temperature: –40 … +105 °C Temperature: up to +150 °C Temperature: up to +125 °C
Features – ACT45L for BroadR-Reach – For reflow soldering and gluing – High inductance range
– Provides excellent balance – Qualified to AEC-Q200 – Qualified to AEC-Q200
parameter (symmetry) – Suitable for lead-free – Suitable for lead-free
– Qualified to AEC-Q200 soldering profiles acc. to soldering profiles based on
– Suitable for lead-free soldering JEDEC J-STD 020D JEDEC J-STD 020D
profiles acc. to JEDEC J-STD 020D
Applications Automotive electronics: CAN/FlexRay Automotive electronics: CAN/FlexRay Automotive electronics: CAN/FlexRay
bus bus bus
Industrial electronics
xDSL applications
TDK EPCOS
Series Double/quad chokes Chip beads for signal line – SMD Chip beads for signal line – High
B82792, B82794, MMZ series frequency, large impedance – SMD
B82791, B82720 MMZ-E series
Technical Rated inductance: 0.1 … 0.7 A Size: 0402 … 2012 Size: 0603 … 1005
data Rated current: 0.47… 68 mH Impedance: 10 … 2500 V (100 MHz) Impedance: 47… 2200 V (100 MHz)
Rated voltage: 42 V Rated current: 100 … 1500 mA Rated current: 150 … 300 mA
Temperature: –55 … +125 °C
Features – SMD and PTH available – High reliability – Broad-band impedance values for
– Very low stray inductance – Closed magnetic circuit structure higher frequency ranges
– Very good symmetry features – Low DC resistance structure of – High reliability
electrode – Closed magnetic circuit structure
– Low DC resistance structure of
electrode
Applications Telecom and automatization Elimination of signal line noises for Elimination of signal line noises for
applications mobile communications, consumer mobile communications, consumer
electronics, automotive electronics electronics
Series Chip beads for signal line – SMD Chip beads for power line – SMD Chip beads for power line – SMD
HFxxACB series HFxxACC series MPZ series
Technical Size: 2012 … 4532 Size: 2012 … 4532 Size: 0603 … 2012
data Impedance: 7 … 125 V (100 MHz) Impedance: 7 … 125 V (100 MHz) Impedance: 10 … 1000 V (100 MHz)
Rated current: 300 … 600 mA Rated current: 1.5 A Rated current: 0.5 … 6 A
Features – Can be applied to a wide range of – Effective EMC suppression over a – Best-in-class energy-saving in the
circuits broad bandwidth can be achieved by low DC resistance range
– Use HF70, 50 and 30 materials inserting into the DC power line on the – No crosstalk with closed magnetic
circuit board circuit structural design
Applications Elimination of signal line noise for Power line applications Elimination of power line noise for
mobile communications, consumer Automotive electronics mobile communications, consumer
electronics, automotive electronics electronics, automotive electronics
TDK EPCOS
Series Common beads for audio/USB1.1 3-terminal filters for signal line – SMD 3-terminal filters for signal line – SMD
signal line – SMD MEM-S/P, MEM-D series ACF series
MCZ1210-D series
Technical Size: 1210 Size: 1608 … 2012 Size: 3225
data Impedance: 90 … 1000 V (100 MHz) Insertion loss: 20 dB (70 … 2000 MHz) Insertion loss: 25 dB (11 … 700 MHz)
Rated current: 50 mA … 0.5 A 30 dB (70 … 2500 MHz) Rated current: 300 mA
Rated current: 100 … 250 mA Temperature: –25 … +85 °C
Features – Compact size, low RDC – Multilayer chip EMC filter utilizing a – T-type filter circuit is magnetically
(0.75 V max.) T-type circuit shielded with ferrite: Superior
– Capable of removing both common – High reliability attenuation characteristics
and differential mode noise – Closed magnetic circuit architecture – Offers even greater attenuation
– Closed magnetic circuit structure enables high-density installation and characteristics when used in a stable
allows high-density installation, prevents crosstalk circuit on the ground
while preventing crosstalk between – Highly effective noise suppression – Ideal for high-density circuit design
circuits space
Applications Elimination of power line noise for MEM-S/P series: general signal line Consumer electronics
mobile communications and consumer (consumer, office applications) Office automation equipment
electronics Factory automation equipment
MEM-D series: high-speed signal line Automotive electronics
(consumer, office applications)
Series 3-terminal filters for power line – SMD 3-terminal filter arrays for multi-line – 3-terminal feedthrough filters
ACH series SMD for signal line – SMD
MEA series YFF Series
Technical Size: 3216 Size: 1210 … 2010 Size: 0402 … 0805
data Insertion loss: 25 dB (6 … 700 MHz) Cut-off frequency: 50 … 500 MHz Temp. range: up to +125 ºC
Rated current: 1.5 … 2 A Capacitance: 4 … 36 pF Rated voltage: 16 … 50 V
Temperature: –40 … +125 °C Rated current: 100 mA Capacitance: 22 pF … 47 µF
Features – Offers even greater attenuation – Array type: LC filter for 2 or 4 lines – Optimized for noise bypass with
characteristics when used in a stable – Effective as a sensitivity suppression signal source circuits
circuit on the ground technique – Ideal for use at higher frequencies
– Ideal for high-density circuit design – Post-filter processing, base oval due to low parasitic inductance
waveform signal
– Suited for high-speed signal lines
TDK EPCOS
Series 3-terminal feedthrough filters for Common-mode filters for signal line – Common-mode filters for signal line –
power line – SMD SMD SMD
YFF Series TCM-G series ACM series
Technical Size: 0402 … 1206 Size: 0403 … 1608 Size: 2012 … 2520
data Temperature: up to +125 ºC Impedance: 12 … 200 V (100 MHz) Impedance: 90 … 1000 V (100 MHz)
Rated voltage: 4 … 50 V Rated current: 0.1 Idc A Rated current: 150 … 400 mA
Capacitance: 0.1 µF to 22 µF
Features – Optimized for noise bypass with – Thin-film common-mode filter with a – Miniaturized wire-wound chip-type
power source circuits large bandwidth filter
– Ideal for use at higher frequencies – Suppresses radiation noise due to – Extremely effective noise
due to low parasitic inductance common-mode noise, without suppression
affecting the transmission of high- – Minimal effect upon high speed
speed differential signals by realizing signals, due to low differential mode
a higher cut-off frequency impedance
Applications Communications High-speed differential signal line High-speed differential signal line
Consumer electronics (USB 2.0, LVDS) (USB 2.0, LVDS)
Green energy
Series Common-mode filters for automotive Common-mode filters for signal line – Common-mode filters for signal line –
signal line – SMD SMD SMD
ACM series TCE series MCZ-AH, MCZ-CH series
Technical Size: 2012 Size: 0806 … 1608 Size: 1210 … 2010
data Impedance: 90 … 360 V (100 MHz) Impedance: 12 … 90 V (100 MHz) Impedance: 24 … 300 V (100 MHz)
Rated current: 220 … 400 mA Rated current: 0.10 A Rated current: 100 … 200 mA
Temperature: –40 … +105 °C
Features – High reliability – Component can be used for – Minimum effect for high-speed
– Impedance variation: 4 types of suppressing common-mode noise differential signals due to wide
impedance values are prepared and ESD bandwidth for differential mode
to correspond to the various – Wide bandwidth (cut-off frequency – Suppresses radiated emissions
applications 3 GHz min.) for differential mode
– Suppresses the common mode EMI MCZ-CH series:
without waveform distortion – Differential mode signal transmission
band has been extended to 3.5 GHz
– Differential mode characteristic
impedance is 100 V
Applications Radiation noise suppression for Ultra high-speed differential signal line MCZ-AH series: High-speed differential
car multimedia interface (MOST, (HDMI, DVI, Display port, USB 3.0) signal line (USB 2.0, LVDS)
USB 2.0, IDB-1394)
MCZ-CH series: Ultra high-speed
differential signal line (HDMI, DVI,
Display port, USB 3.0)
TDK EPCOS
Series Common-mode filters for power line – Common-mode filters for automotive Common-mode filters for power line –
SMD power line – SMD SMD
ACM series ACM-V series ACP3225 series
Technical Size: 4520 … 1513 Size: 4520 … 1211 Size: 3225
data Impedance: 180 … 1400 V (100 MHz) Impedance: 230 V (100 MHz) Impedance: 1000 V (100 MHz)
Rated current: 1.0 … 10 A Rated current: 1 … 8 A Rated current: 1.2 A
Temperature: –40 … +125 °C
Features – Noise is strongly suppressed – High impedance characteristic has – Capable of achieving reduction in
– Best-in-class highest current achieved superior common mode power consumption and improve-
handling up to 10 A noise suppression ment of noise suppression effect,
– Lightweight choke coil – Products have serialized a large due to its low DC resistance and
current product up to 8 A correspon- high common-mode impedance
ding to various DC power lines – Low profile and compact shape
– Due to the low profile design, it is makes it suited for surface mounting
suitable for surface mounting
Applications Used for power line noise suppression Automotive: Common-mode noise Power line noise suppression of
for electronic devices countermeasures for DC power lines electronic devices
Suitable for portable devices of electronic control equipment Noise suppression of adapter lines
Multimedia equipment in automotive or battery lines of PCs
applications
Series Clamp filters (Ferrite Cores with case) Clamp filters (Ferrite Cores with case)
ZCAT, ZCAT-A, ZCAT-B, ZCAT-D/DT for ECU in automotive
series ZCAT-V-BK series
Technical Impedance range: Impedance range:
data 20 … 80 V (10 … 100 MHz) 120 … 140 V (100 MHz)
50 … 150 V (100 … 500 MHz) Temperature : –40 … +125 °C
30 … 35 V (50 … 500 MHz)
Temperature : –40 … +85 °C
Features – Unique plastic case ensures simple, convenient – Can easily be attached without cutting the cable
installation and features a self-holding mechanism – Plastic case has a self-sustaining mechanism that
– Ferrite core provides excellent absorption of prevents slipping on the cable after being clamped
high-frequency EMC and is highly effective as – Excellent high-frequency noise absorption effect
countermeasure against common-mode EMC – Works against common-mode noise, allowing for noise
suppression without affecting signal quality
TDK EPCOS
Series Feedthrough capacitors IEC inlet filters 2-line filters for single-phase or
Feedthrough filters B8477* DC applications
B85121, B85321 B8411…, B84142
Technical Rated voltage: 110 … 600 V AC/ V DC Rated voltage: 250 V AC/DC Rated voltage: 250 … 520 V AC
data Rated current: 16 … 500 A Rated current: 1 … 20 A Rated voltage: 250 … 1500 V DC
Rated current: 0.5 … 1600 A
Feedthrough capacitors
Rated capacitance: 0.0025 … 4.7 µF
Feedthrough filters
Rated capacitance:
2x 0.0025 … 2x 4.7 µF
Features – MKP technology (dry, self-healing) – IEC connector – Modular SIFI filter system
– Solderless production technology – Version with fuse holder – One or multi-stage filters
– Terminals as axial leads, screw – Version with fuse holder and switch – High-voltage versions
connectors, soldering tags or tab – Medical versions
connectors
Series Filters for three-phase systems Converter chokes Output filters, LCL filters
B84143, B84144 B86305, B86301 B84143V …, B84143G/Q …
Technical Rated voltage: 440 … 760 V AC Rated voltage: 520 V AC Rated voltage: 440 … 760 V AC
data Rated current: 8 … 2500 A Rated current: 4 … 1500 A Rated current: 4 … 400 A
Clock frequency: 2.4 … 16 kHz
Features – Filters without/with neutral line – Line reactors – Sine-wave output filters
– One or multi-stage – dv/dt chokes – Sine-wave output filters, low cost
– Compact filters – DC chokes – Sine-wave EMC output filters
(SineFormer)
– LCL filters
TDK EPCOS
Series Filters for shielded rooms EMC services Ring core chokes
B84299, B84312 (current compensated)
B82720 … B82725, B82791
Technical Rated voltage: 100 … 690 V AC EMC laboratory offers Rated current: 0.25 … 16 A
data Rated voltage: 100 … 1000 V DC comprehensive consulting, Rated inductance: 0.2 … 100 mH
Rated current: 0.1 … 1600 A pre-compliance investigations and Rated voltage: 250 V
Insertion loss: conformity testing
>100 dB from 14 kHz … 40 GHz
Features – Power line filters – Accredited laboratory – High resonance frequency owing to
– Filters for data, telephone or control – In-house or on-site testing special winding technique
lines – Measurement of conducted and – Approx. 1% stray inductance for
radiated emissions symmetrical interference
suppression
– Potted versions possible
– B82720 also available in SMD
– Plastic case with terminals
Applications Power supplies of high power Inverter applications in home Power supplies
applications, such as solar inverters, appliance, e.g. washing machine, Ballasts
drives, household appliances dryer
TDK EPCOS
Series U core chokes Frame core chokes (FC) Ring core chokes, triple/quad
(current compensated) (current compensated) (current compensated)
B82730 B82732F …, B82733F… B8274 … B8276
Technical Rated inductance: 0.33 … 15 mH Rated inductance: 10 … 100 mH Rated inductance: 0.35 … 6.2 mH
data Rated current: 0.4 … 2.6 A Rated current: 0.45 … 2.3 A Rated current: 6 … 62 A
Rated voltage: 300 V Rated voltage: 250 V Rated voltage: 440 … 690 V
Features – High resonance frequency – Closed magnetic circuit with frame – High power handling
– Approx. 1.3% stray inductance for construction – Available in plastic case (fully potted)
symmetrical interference suppression – 4-section winding or on baseplate
– Low whirring noise – High stray inductance, excellent
– Low saturation effects differential mode suppression
– Low-height horizontal versions feasible – High pulse-handling capability
on request – Low height allows usage in lamp
– Compact design ballasts
– Optional: magnetic bypass to increase
stray inductance
Applications Compact power supplies Power supplies Power supplies of high power
Ballasts Ballasts applications, such as solar inverters,
Household appliances drives
Series I core chokes Ring core (iron powder) chokes E, EFD, ETD cores
B82502 … B82523 B826 …
Technical Rated inductance: 0.015 … 47 mH Rated inductance: 0.033 … 20 mH Core shape: E5 … E80
data Rated current: 0.5 … 95 A Rated current: 0.3 … 6 A ETD29 … ETD59
Rated voltage: 400 … 500 V Rated voltage: 250 V EFD15 … EFD30
Material: N87, N97
Features – Low power dissipation – Iron powder core – Wide range of core shapes, sizes
– Broadband interference suppression – Single and double chokes and accessories
– Core: laminated iron-silicon – High thermal stability – Cost optimized
– Single and double chokes available – High differential attenuation at low
– Compact design frequencies
Applications Power supplies of high power PFC and reduction of harmonics in Power supplies
applications power supplies AC/DC converters
DC/DC converters
TDK EPCOS
Ferrites
Technical Core shape: ELP14 … ELP64 Core shape: PQ16 … PQ50 Core shape: U93 … U141
data ER9.5 … ER32 Material: N49, N87, N92, N95, N97 PM50 … PM114
EQ13 … EQ30 Material: N27, N87, N97
Material: N49, N87, N92, N95, N97
Ferrites
Technical Core shape: RM4 … RM14 Core shape: EP5 … EP20 Core shape: P3.3 … P70
data Material: N49, N87, N97, K1, M33, N48 EPX7 … EXP10 Material: K1, M33, N48, N22, N30, T38
Material: T38, T57, T66
Features – Without center hole – Low hysteresis loss coefficient – Without center hole
– Compact design – Low THD – Optimized shielding
– Accessories available – Accessories available
TDK EPCOS
Ferrites
Series Ring cores Ferrite cores for EMI suppression Ferrite cores for switching
power supplies
Technical Core shape: R2.5 … R202 Core shape: BB, MH, RID, RH, RU, Core shape: EE, EEM, EF, EI, EIR, EL,
data Material: K10, T57, N30, N87, T35, SH, SP, SU ELT, EP, EPC, ER, ETD, LP, PQ, PQI,
T37, T38 Initial permeability (typ.): RM, T
45 … 50 000 µi Initial permeability (typ.):
NiZn ferrites 2200 … 12 000 µi
Material: PC47, PC90, PC95, HS72,
HS10, HS12
MnZn ferrites
Features – Parylene-coated – Suitable for one-hole ferrite beads – Suitable for various transformers of
– Epoxy-coated – Various materials, shapes and general-purpose DC/DC converters
packaging styles available
Applications Power supplies Noise suppression for video, acoustic, Main transformers
AC/DC converters office automation and communication Drive transformers
DC/DC converters equipment, automotive electronics Choke coils
Ferrites
Series Ferrite cores for Large size ferrite cores Ferrite cores for coils
telecommunication for high power
Technical Core shape: P, RM, EP, EPC, ER, EE, Core shape: EC, EE, EI, EIC, PQ, SP, Initial permeability (typ.): 1 … 1500 µi
data EEM, T T, UU Material: GT1, GT2, GT3, GT4, GT5,
Initial permeability (typ.): Initial permeability (typ.): GT6, GT7, GT8, GT9, GT10, L2H, L5,
3300 … 15 000 µi 1800 … 2300 µi L6, L6N, L7H, L8F, L9H, L11H, L17H,
Material: H5A, H5B2, H5C2, H5C3, Material: PE22, PC40, PE90 L18H, L20H, T2F, T6F, T7F, T9F, Sy20,
HP5, DNW45 MnZn ferrites SY22 NiZn ferrites
MnZn ferrites
Features – Toroidal cores are suitable for pulse – Large size ferrite cores developed for – Mountable with lead-free soldering
transformers and sensors reactors and transformers used in (+260 °C max.)
– Epoxy and paraxylylene insulation high power units – Excellent common-mode noise
coating is available suppression
– High-quality and wide-band ferrite
cores for LAN
Applications Filters Transfomers (high frequency inductive Inductors, transformers, antennas, and
Sensors heater, UPS, EV, automated other coil products
Transformers warehouse)
Reactor choke (general purpose
inverters, trains)
TDK EPCOS
Series Magnetic sheets for noise suppression Magnetic sheets for noise suppression
Flexield – IFL12 Material Flexield – IFL10M Material
TDK EPCOS
Series MEMS microphones – SMD MEMS pressure and humidity sensors – SMD
SAW Filters, Duplexers for Base Stations, Small Cells, Femto Cells and Trunked Radio
Features – Very good nearby selectivity – Low insertion loss: e.g. 1.3 dB (typ.) – Low insertion loss: e.g. 1.9 dB (typ.)
– Bandwidths up to full LTE band – High ultimate rejection – High ultimate rejection
– Customized design – Matched duplexer with standard and
mirror pinning
– 2-in-1 filter and diplexer
– Single filters for UL/DL/Snif
Applications Base stations (macro, micro, pico cells) Base stations (macro, micro, pico cells) Femto cells (residential femto cells,
Tetra, PMR enterprise femto cells, indoor pico
cells), Small cells
TDK EPCOS
Series SAW resonators – SMD Wideband filters – SMD Narrowband filters – SMD SAW filters and duplexers
for automotive
telematics – SMD
Technical Center frequency: Center frequency: Center frequency: Center frequency:
data 300 MHz … 1.2 GHz 72.54 MHz … 2.5 GHz 169,5 … 930 MHz 710 … 2140 MHz
Center frequency tolerance: Usable bandwidth: Usable bandwidth: Usable bandwidth:
25 … 300 kHz 0.6 … 97 MHz 0.1 … 1.6 MHz 25 … 93 MHz
SMD package size (EIA): Output impedance: 50 V SMD package size (EIA): SMD package size (EIA):
2520, 3030, 3550 SMD package size (EIA): 2520, 3030, 3838, 5050 1411, 2016, 2520, 3030,
1411, 3030, 3838, 5070 3025
Features – 1-port resonators – Low insertion loss: – Low temperature drift – Filters and duplexers for
– 2-port resonators down to 0.6 dB – Very good near attenuation all common mobile com-
– High Q-factor, low motion – High ultimate rejection – Multichannel filters munication frequencies
resistance – Automotive reliability – Diplexers/Triplexers for 2G/3G/4G and GNS
– Automotive reliability AEC-Q200 Grade 1 or 3 multiband systems systems
AEC-Q200 Grade 1 – Automotive reliability – Automotive reliability
AEC-Q200 Grade 1 AEC-Q200 Grade 3
Applications Automotive RKE, TPMS RKE multichannel receivers, Automotive RKE Automotive telematics
Wireless transmitters in home comfort and industrial TPMS Navigation devices
home comfort and applications, smart metering, Car alarm systems Toll systems
industrial applications SDARS, DMB
Technical Low loss RF band-stop filter for ISDB-T 1seg, DVB-H, Low loss RF filter
data DVB-T, CMMB and SBTVD Low insertion attenuation
Low insertion loss Low amplitude ripple
Low amplitude ripple and group delay ripple No matching network required
Unbalanced to unbalanced operation Unbalanced to balanced operation
Features – Package size 1.4 x 1.1 mm – Package size 3.0 x 3.0 x 1.1 mm
– Maximum height of 0.45 mm – Maximum height of 1.225 mm
TDK EPCOS
Features – Matched WCDMA/LTE duplexer – Supports WCDMA/LTE bands (1/4, 25, 3, 26(5), 7, 8, 13,
– Diplexed GSM 2in1 and 4in1 filters 17, 20, 29) and US carrier aggregation
– Single filters for all mobile communication standards – Integrates 9 WCDMA/LTE DRx SAW filters for bands
– Special low profile products for modules 1/4, 2, 3, 26(5), 7 8, 13, 17, 20, 29, MIPI SP7T switch
and decoder
– Integrated ESD protection acc. IEC-61000-4-2
Applications Mobile phones, tablets and data cards supporting Mobile phones, tablets and data cards supporting
GSM, WCDMA/LTE and TDD GSM and WCDMA/LTE
Series Front-end modules with 4 integrated duplexers – SMD Complementary wireless – SMD
(FEMiD) D5201
Technical Typ. insertion loss: 1.2 … 3.4 dB (dep. band) Very low IL, e.g. 0.45 dB (typ.)
data Typ. VSWR: 1.5:1 Up to 100 bar molding
Typ. Isolation: > 55/50 dB (Tx/Rx) 8 kV ESD protected
Harmonic attenuation: > 30 dB
Max. input power: 29 dBm
SMD package size: 5.0 x 4.0 x 1.0 mm
Features – Supports 4 GSM bands (850/900/ 1800/1900), – Navigation (GPS and Glonass), WLAN and Bluetooth
4 WCDMA/LTE bands (I, II, V, VIII) and 4 other bands – Very high isolation
from additional aux. ports – GPS/WLAN multiplexer
– Integrates all GSM filters, Tx low pass filter, switch – Wafer level package
and decoder
– Integrates WCDMA DPX band (I, II, V, VIII)
– Integrated ESD protection acc. IEC-61000-4-2
Applications Mobile phones, tablets and data cards supporting Mobile phones, tablets, information technology,
GSM and WCDMA/LTE navigation devices
TDK EPCOS
Technical SiP Tri-Core solution SiP Quad-Core solution Center frequency: 836 … 1960 MHz
data GPS/BT/FM WLAN/GPS/BT/FM Usable bandwidth: 25 … 93 MHz
Module based on Texas Instruments Module based on Texas Instruments Package size (EIA): 1411, 2520, 3030,
NL5500 WL1283 3025
Package size: 6.7 x 7.5 x 1.2 mm (typ.) Package size: 11.9 x 9.5 x 1.2 mm (typ.)
Series Multilayer band pass filters – SMD Multilayer band pass filters – SMD Multilayer band pass filters – SMD
DEA series (balance output type) (balance output type)
DEA series DEA series
Technical Size (l x w x t): 1.6 x 0.8 x 0.6 … Size (l x w x t): 1.6 x 0.8 x 0.5 … Size (l x w x t): 2.0 x 1.25 x 0.8 …
data 2.5 x 2.0 x 1.5 mm (max.) 2.5 x 2.0 x 1.0 mm (max.) 2.0 x 1.5 x 1.4 mm (max.)
Features – Compact lightweight and thin type – Compact lightweight and thin type – Compact lightweight
– Low loss in the passband – Low loss in the passband – High performance
– High attenuation in the attenuated – High attenuation in the attenuated
band band
– IC impedance compatible design
available
Applications 2.4 GHz WLAN/Bluetooth 2.4 GHz WLAN/Bluetooth 3.5 GHz WiMAX
5.0 GHz WLAN 2.5 GHz WiMAX ZigBee
5.0 GHz Digital cordless 5.0 GHz WLAN
WiMAX up to 3.6 GHz
TDK EPCOS
Series Thin-film band pass filters – SMD Multilayer low pass filters – SMD Thin-film low pass filter – SMD
TFSB series DEA series TFSL series
Technical Size (l x w x t): 1.0 x 0.5 x 0.3 mm Size (l x w x t): 1.0 x 0.5 x 0.4 … Size (l x w x t): 0.65 x 0.50 x 0.25 mm
data 2.0 x 1.25 x 0.6 mm (max.)
Features – Small size – Compact lightweight and thin type – High performance
– Low profile – Low loss in the passband – High repeatability
– High attenuation in the attenuated – Ultra-minature and low-profile
band
Series Multilayer high pass filters – SMD Multilayer phase shifters (delay lines) – Multilayer diplexers – SMD
DEA series SMD DPX series
DEA series
Technical Size (l x w x t): 1.6 x 0.8 x 0.6 … Size (l x w x t): Size (l x w x t): 1.6 x 0.8 x 0.4 …
data 2.0 x 1.25 x 1.0 mm (max.) 1.0 x 0.5 x 0.52 mm (max.) 2.0 x 1.25 x 1.0 mm (max.)
Features – Compact lightweight and thin type – Compact lightweight and thin type – Compact lightweight and thin type
– Low loss in the passband – Low loss – Low loss in the passband
– High attenuation in the attenuated – Phase can be shifted according to – High attenuation in the attenuated
band the frequency band of each system band
TDK EPCOS
Technical Size (l x w x t): 1.0 x 0.5 x 0.3 mm Size (l x w x t): 2.0 x 1.25 x 0.9 … 2.5 x 2.0 x 1.2 mm
data
Technical Size (l x w x t): 1.0 x 0.5 x 0.4 … Size (l x w x t): 0.85 x 0.65 x 0.4 … 1.6 x 0.8 x 0.4 mm
data 2.0 x 1.25 x 0.95 mm (max.)
Features – Compact lightweight and thin type – Optimal, thin-film chip balun transformer for 50 to 200 V
– Low loss with low loss at DVB-H/T and ISDB-T frequency bands
(174 to 860 MHz)
TDK EPCOS
Technical Size (l x w x t): 2.0 x 1.2 x 1.0 mm … 3.2 x 2.5 x 2.3 mm Size (l x w x t): 0.65 x 0.50 x 0.25 mm
data
Applications Tuner for TV, mobile devices (e.g. DVB-T/H, ISDB-T) For 2300 … 2690 MHz (50 … 100 V)
Power divider for STB and tuners For 1930 … 1990 MHz (50 … 100 V)
Series Multilayer directional couplers – SMD Multilayer directional couplers (Dual-Band) – SMD
HHM series HHM series
Technical Size (l x w x t): 1.0 x 0.5 x 0.4 … 2.0 x 1.25 x 0.95 mm Size (l x w x t): 2.0 x 1.25 x 0.95 mm
data
Features – Compact lightweight and thin type – Compact lightweight and thin type
– Low loss – Low loss
– High isolation – High isolation
TDK EPCOS
Technical Size (l x w x t): 0.65 x 0.50 x 0.25 mm Size (l x w x t): 1.6 x 0.8 x 0.4 mm, 8.0 x 3.0 x 1.0 mm
data
Applications 2.4 GHz WLAN 2.4 GHz WLAN/Bluetooth: Single and Dual Band
GPS/2.4 GHz: Dual Band
IEEE802.11 a/b/g/n
TDK EPCOS
Series SESUB-PAN-T2541
Features – Micro size (4.6 × 5.6 × 1.0 mm) ideal for wearable devices
– Communicable with Bluetooth Smart Ready compatible devices
– Separate antenna type that provides more flexibility for product design
TDK EPCOS
Applications Diesel injection systems Diesel injection systems Gasoline injection systems
Features – Compact, thin sounding body using unimorph Pin terminal/lead, without oscillator circuit
piezoelectric vibration plate – High-performance buzzers that employ unimorph
– No leakage flux piezoelectric elements
– Designed for easy incorporation into various circuits
– Extremely low power consumption in comparison to
electromagnetic units
– Same part can serve as both a musical tone oscillator
and a buzzer
TDK EPCOS
Buzzers
Features – Pin type terminal construction – Built-in oscillator circuits: output can – Without oscillator circuit
enables direct mounting onto be produced by merely connecting – High output level of sound pressure
printed circuit boards to a DC power supply due to high quality parts (yoke and
– Circuitry utilizes chip-type magnets)
components for significantly – Good frequency response and
reduced size and high reliability high quality sound
Surge Arresters
Series S20, S30, S50, S80 – SMD LN8 – Arrester stack – SMD EHV
Features – 2-electrode square design – 2-electrode stacked surge arrester – High voltage surge arrester
– SMD mounting – SMD mounting – High insulation resisitance
– Low capacitance – Excellent follow current limiting – Very small size
– High insulation resistance characteristic
Applications Overvoltage protection in Protection of DC power supply circuits AC power supply units
telecommunication appliances, in telecommunication systems Photovoltaic systems
xDSL modems, cable modems, Automotive (electric and hybrid vehicles)
electronic circuits
TDK EPCOS
Surge Arresters
Series M5 A8 T8
Technical DC spark-over voltage: 75 … 600 V DC DC spark-over voltage: 75 … 600 V DC DC spark-over voltage: 90 … 600 V DC
data Nom. discharge current: 5 kA Nom. discharge current: 20 kA Nom. discharge current: 10 kA
Size: Ø 5 x 5 mm Size: Ø 8 x 6 mm Size: Ø 8 x 10 mm
Features – 2-electrode SMD and leaded version – 2-electrode SMD and leaded version – 3-electrode arresters
– Low capacitance – Very high discharge current – High discharge current
– High insulation resistance – High insulation resistance – High insulation resistance
Surge Arresters
Series T8 – with failsafe T9 – SMD with and w/o failsafe TQ90 – SMD
Features – 3-electrode arresters with failsafe – 3-electrode arresters in SMD and – 3-electrode arresters in SMD
– High discharge current failsafe option – High insulation resistance
– High insulation resistance – High insulation resistance
Applications Overvoltage protection in telecommunication appliances, fixed line networks, wireless networks and electronic circuits
TDK EPCOS
Surge Arresters
Technical DC spark-over voltage: > 600 V DC DC spark-over voltage: > 600 V DC DC spark-over voltage:
data Protection level at 1.2/50 µs, 6 kV: Protection level at 1.2/50 µs, 6 kV: > 600 V DC, > 1100 V DC
< 1500 V < 1500 V Protection level at 1.2/50 µs, 6 kV:
Impulse current (10/350 µs): 100 kA Impulse current (10/350 µs): 100 kA < 1500 V, < 2500 V
Size: Ø 30 x 30 mm Size: Ø 30 x 12 mm Max. discharge current: 60 kA
Impulse current (10/350 µs): 12 kA
Size: Ø 12 x 17 mm
Applications AC line protection 230/400 V AC, class I, N-PE AC line protection 230/400 V AC,
class I & II, N-PE
Power supplies
Photovoltaic systems
Technical DC breakdown voltage: 270 … 3200 V Max. voltage: 20 … 1 000 V Max. voltage: 265 V
data Max. discharge current: 10 kA Rated resistance: 0.3 … 7500 V Rated resistance: 10 … 120 V
Size: Ø 8 x 6 mm Rated current: 8 … 2100 mA Rated current: 50 … 220 mA
Features – High insulation resistance – High thermal stability – High thermal stability
– Temporary overvoltage withstand – No resistance drift for 100 switching – No lead contained in ceramic or
capability cycles solder joint
– IEC 61643-11 – No resistance drift for 100 switching
– UL 1449 (E319264) cycles
Applications AC line protection 230/400 V AC Overcurrent protection in automotive electronics, power supplies,
Device protection entertainment and household electronics
Power supplies
Photovoltaic systems
TDK EPCOS
PTC Thermistors
Series Overcurrent protection – SMD Overcurrent protection Telecom pair protectors – SMD
Telecom
Technical Max. voltage: 30 … 400 V Max. fault voltage: 245 V Max. fault voltage: 245 V
data Rated current: 12 … 310 mA Rated resistance: 4.75 … 55 V Rated resistance: 9 … 75 V
Size (EIA): 0402 … 4032 Matching: 0.5 … 2 V
Features – High thermal stability – Compliant with ITU standards – Compliant with ITU standards
– No resistance drift for 100 switching – No resistance drift after switching – Matched pair in one housing
cycles
Applications Overcurrent protection in automotive Overcurrent protection in central office linecards, base stations and
electronics, power supplies, entertain- customer premises equipment
ment and household electronics
PTC Thermistors
Technical Max. fault voltage: 600 V Max. voltage: 160 … 265 V Rated voltage: 120 … 230 V AC
data Rated resistance: 70 V Rated resistance: 80 … 3200 V Max. current.: 6 … 12 A
Features – Compliant with GR1089 central – Useful life up to 100 000 switching – Useful life > 100 000 switching cycles
office cycles
– Matched pair in one housing
Applications Overcurrent protection in central office General purpose delayed switching in Delayed switch-off of the starter
linecards entertainment, household and auxiliary winding in single-phase
industrial electronics induction motors (e.g. in refrigerators
and air conditioners)
TDK EPCOS
PTC Thermistors
Series Point level sensors Motor protection Limit temperature sensors Limit temperature sensors –
Single or triple sensors SMD
Features – Liquid level detection for – Characteristics for sensing – Available as leaded disks – Fast and reliable response
oil and water temperatures compliant or assembly probe – UL approval
– Hermetically sealed glass with DIN 44081/44082
case or stainless steel case – Customer specific lead
lengths on request
Applications Level sensors for indoor and Industrial motors and Power supplies Automotive electronics
outdoor tanks machines protection Lighting equipment Entertainment and house-
Industrial and home hold electronics
applications Battery packs
LED lighting
PTC Thermistors
Technical Max. voltage: 30 … 230 V Customized solutions upon request Customized heating elements
data Rated resistance: 1 … 10 000 V Max. voltage: up to 1 kV
Features – Available in round and rectangular – Available in rectangular shape – Any kind of 3D structure possible
shape – Al or Ag electrode – High accuracy of geometrical
– Al or Ag electrode parameters
– Efficient heating performance
Applications Automotive air heating systems Automotive air or water heating Heating of fluids, gases and solids
Electrothermal actuators systems
Cabinet heating Hybrid and electric vehicles
TDK EPCOS
Varistors
Technical VAR-18-P S05: Imax 8/20 µs: up to 800 A Imax 8/20 µs: up to 20 kA
data (Plane surface electrode type) S07: Imax 8/20 µs: up to 1750 A Operating voltage VRMS: 130 … 750 V
VAR-18-S S10: Imax 8/20 µs: up to 3.5 kA
(Side surface electrode type) S14: Imax 8/20 µs: up to 6 kA
Voltage: 2.0 … 38.0 E10 mA (V) S20: Imax 8/20 µs: up to 12 kA
Operating voltage VRMS: 11 … 1100 V
Varistors
Technical Q14: Imax 8/20 µs: 8 kA T14: Imax 8/20 µs: 6 kA Size (EIA): 3225, 4032, 4948 Imax 8/20 µs: up to 5 kA
data Q20: Imax 8/20 µs: 15 kA T20: Imax 8/20 µs: 10 kA Operation voltage VRMS: Operating voltage VRMS:
Operating voltage VRMS: ETFV25: Imax 8/20 µs: 20 kA 14 … 300 V 175 … 385 V
130 … 680 V Operating voltage VRMS: Max. surge current (8/20 µs):
T14: 130 … 420 V 3500 A
T20: 130 … 1000 V Max. energy absorption:
ETFV25: 115 … 420 V 82 J (2 ms); Max. power
dissipation: 400 mW
Features – Leaded varistors 14 and – ThermoFuse (varistor and – Electrically equivalent to – Plastic housing protected
20 mm fuse in one housing) leaded types S05, S07, varistor
– Max. load capacity vs. – Size Ø 14, 20 and 25 mm S10 – No flame or rupture
height disks – Lead-free soldering – Heat resistance and
– High surge current ratings – Space saving – UL and CSA approved *) flame-retardant
up to 15 kA – Monitoring option with 3rd to UL 94 V-0
– For high energy absorption lead – UL 1449 ed.3
– UL 1449 ed.3 – UL 1449 ed.3
Applications Industrial applications Industrial applications Surge current protection in Consumer electronics
Power supplies Power supplies SMD package for automo- Power supplies
Inverters Inverters tive, industrial and telecom
Photovoltaic systems Power meters applications
Varistors
Technical LS40: Imax 8/20 µs: 40 kA Iimp 10/350 µs: 6.5 kA Imax 8/20 µs: up to 75 kA
data LS41: Imax 8/20 µs: 50 kA Imax 8/20 µs: 40 kA Operating voltage VRMS: 130 … 550 V
LS42: Imax 8/20 µs: 65 kA Operating voltage VRMS: 130 … 460 V
Operating voltage VRMS: 130 … 750 V
Varistors
Technical B32: Imax 8/20 µs: 25 kA S07: Imax 8/20 µs: up to 250 A E32: In 8/20 µs: 5 kA
data B40: Imax 8/20 µs: 40 kA S10: Imax 8/20 µs: up to 500 A E41: In 8/20 µs: 10 kA
B60: Imax 8/20 µs: 70 kA S14: Imax 8/20 µs: up to 1 kA Cont. operating voltage: 2.45 … 4.9 kV
B80: Imax 8/20 µs: 100 kA S20: Imax 8/20 µs: up to 2 kA
Operating voltage VRMS: 75 … 1100 V Operating voltage: 16 … 48 V DC
Operating temperature: +125 °C
Features – Disk shaped varistor element potted – Leaded varistors 7 to 20 mm – Size Ø 34 and Ø 42 mm
in plastic housing – High energy absorption – Glass collar passivation
– Screw terminals – Coating flame retardant to UL 94 V-0
– Housing and potting flame retardant
to UL94 V-0
– UL 1449 ed.3
TDK EPCOS
Series S153, S235, S236, S237, S238, Plastic case Leaded disks
P11, P13, S364, S464
Technical Operating voltage VRMS: 265 V Max. voltage: 260 … 560 V AC Max. voltage: 260 … 560 V
data Rated resistance at +25 °C: 1 … 120 V Rated resistance: 22 … 100 V Rated resistance: 25 … 500 V
Imax: up to 20 A
Load capacitance: up to 2500 pF
Series MLV and CeraDiodes – SMD Multilayer chip varistors Multilayer chip varistors
AVRL AVR-M
Technical Size (EIA): 0201 … 2220 Size: 0402 … 1608 Size: 0402 … 2012/14A2
data Max. operating voltage: 5.5 … 80 V DC Varistor voltage: 27 … 90 typ. V Varistor voltage: 6.8 … 39 V,
Typical capacitance: 0.6 … 24 000 pF 1 mA (DC 1 mA) 1 mA (DC 1 mA)
Max. surge current (8/20 µs): 1 200 A Maximum continuous voltage: Max. continuous voltage:
Max. energy absorption (2 ms): 10 … 25 max. V DC 3.5 … 28 max. V DC
12 000 mJ Maximum energy: 0.003 … 0.3 J max.
(10/1000 s)
Max. peak current: 1 … 100 A max.
(8/20 s)
TDK EPCOS
Applications ESD protection for automotive, consumer, industrial, and ESD and high-transient overvoltage protection in
wireless applications automotive applications
Combined ESD protection and EMI filtering for audio lines
in consumer and wireless applications
Technical Size (EIA): 1206/1812/2220 Size (EIA): 0402 … 0805 / 1206 on request
data Max. operating voltage: 16 … 45 V DC B values: 3455 K … 4575 K
Max. surge current (8/20 ms): 100 … 1200 A R values: 1 … 680 kV
Max. load dump energy (10 pulses): 1.5 … 12 J R tolerance: up to +/-1%
Max. jump start voltage (5 min): 24.5 … 26 V
Nominal capacitance (1 kHz, 0.5 V): 220 … 4700 nF
Insulation resistance: ≥ 10 MV
Operating temperature: up to +125 °C
Applications Combined protection against transient and RFI Temperature measurement and compensation in
suppression in a single component for DC motors consumer electronics, information technology, industrial
and wireless applications
TDK EPCOS
NTC Thermistors
Nebulizer Units
Features NB-59S-09S
– Compact size
– Compliance with radio law noise regulations
– Reduction of harmonic component noise
– Parallel connection to one transformer is supported
– Provides DC 48 V output
NB-80E-01
– Compact, with highly reliable circuitry
– Separate transducer and drive circuit sections
provide superior layout versatility
TDK EPCOS
NTC Sensors
Series NTC thermistors with lead spacing Mini sensors with bendable wires Glass-encapsulated sensors
Technical Operating temperature: –55/+155 °C Operating temperature: –55/+155 °C Operating temperature: –55/+300 °C
data Resistance value: 1 … 470 kV Resistance value: 2 … 100 kV Resistance value: 2 … 100 kV
Accuracy (%): DRR/RR = 1, DRB/RB = 1 Accuracy (%): DRR/RR = 1, DRB/RB = 1 Accuracy (%): DRR/RR = 1, DRB/RB = 1
Head size: 2.5 … 4.5 mm Head size: 2.41 … 2.8 mm Head size: 0.9 … 3.0 mm
Diameter of lead wires: 0.4 … 0.6 mm Diameter of lead wires: 0.25 mm Diameter of lead wires: 0.15 … 0.3 mm
Lead spacing: 2.5 or 5.0 mm Delivery mode: bulk Delivery mode: bulk
Delivery mode: tape & reel; bulk Coating: epoxy Coating: glass
Coating: epoxy Insulation voltage: 500 V/1 s
Features – Available with insulated leads – Available with insulated leads – Available with insulation of head and
– High measuring accuracy – Special version with improved leads
– Lead-spacing resistance to humidity available – High measuring accuracy
– Rugged design – High measuring accuracy – Very short response time
– Cost effective – Tight B value tolerance available
– Available with long bendable leads
– UL approval (S861, S867)
NTC Sensors
Technical Operating temperature: –55/+260 °C Operating temperature: –40/+80 °C Operating temperature: –10/+200 °C
data Resistance value: 10 … 30 kV Resistance value: 5 … 12 kV Resistance value: 4.8 … 48 kV
Accuracy (%): DRR/RR = 1, DRB/RB = 1 Accuracy (%): DRR/RR = 2, DRB/RB = 1.5 Accuracy (%): DRR/RR = 2, DRB/RB = 1
Head size: 3.0 mm Head size: 5.4, 7, 8, 9 mm
Diameter of lead wires: 0.3 mm Cable length: up to 2800 mm
Delivery mode: bulk
Coating: glass
Insulation voltage: 500 V/1 s
Features – With insulation of head and leads for – Highly resistant to water/moisture – Suitable for use in corrosive
specified media resistance – Construction based on environments
– Tests with several medias specified DIN EN 60 730-1/VDE protection – Highly resistant to water/moisture
(e.g. oil, fuel) class 2 (M2020) – UL approved (K276)
– High measuring accuracy – UL approved (M2020: file E69802) – VDE approval
(K276: DIN EN 60 539-1:2002)
TDK EPCOS
NTC Sensors
Series Screw-on temperature sensors Pipe mounted temperature sensors Evaporator sensors
Technical Operating temperature: –55/+300 °C Operating temperature: +5/+100 °C Operating temperature: –40/+90 °C
data Resistance: 5 … 100 kV Resistance: 10 kV Resistance: 2 … 10 kV
Accuracy (%): DRR/RR = 2, DRB/RB = 1 Accuracy (%): DRR/RR = 3, DRB/RB = 1 Accuracy (%): DRR/RR = 1, DRB/RB = 1
For pipe diameter: 13.5 … 22 mm
Insulation voltage: 500 V AC
Features – Good thermal coupling through – Fast and easy mounting Special version with glass-
metal tag – Short response time encapsulated NTC:
– Thermistor encapsulated in – Good thermal coupling to pipes – Very short response time
metal tag case < 3 s in water and < 4 s in air 5 m/s
– M703: UL approval (E69802) – Highly humidity-resistant
NTC Sensors
Technical Operating temperature: –40/+90 °C Operating temperature: –40/+85 °C Operating temperature: –40/+100 °C
data Resistance value: 2 … 30 kV Resistance value: 2 … 30 kV Tolerance: ±15%
Accuracy (%): DRR/RR = 1, DRB/RB = 1 Accuracy (%): DRR/RR = 1, DRB/RB = 1
Features Plastic version with clip mounting – Humidity resistant over-molded – Mono and dual-zone sensors
– Fast response time design – High resolution and sensitivity
– Reduction of weight – High resistance to water splashes – Measurement of solar radiation on
– Simplified recycling IPx9k the passenger compartment for the
– Clips for mounting (no sealing) – Cable-based design HVAC system
– Designed for 2000 h water – Angular characteristics
immersion at +80 °C – Analog signal
Applications Measurement of average Outside temperature measurement Measurement of solar radiation and
air temperature direction
TDK EPCOS
NTC Sensors
Series NTC sensors NTC sensors NTC sensors – ABS Plastic case
NTCGP series NTCDP series NTCDP series
Technical Nominal resistance value: Nominal resistance: R25 = 10 kV ±3% Nominal resistance:
data R25 = 15 kV ±3% … 50 kV ±3% B constant: B25/85 = 4000 K ±2% R3 = 5.6 kV ±0.2 kV (3 °C)
B constant: B25/50 = 3950 K ±3% Operating temperature: –40 … +150 °C B constant: B3/50 = 3850 K ±100 K
Operating temperature: –20 … +80 °C Thermal time constant: 15 s max. Operating temperature: –40 … +85 °C
Thermal time constant: 6 s max. (in still water) Thermal time constant: 30 s max.
(in still water) Heat dissipation constant: 3.3 mW/°C (in still water)
Heat dissipation constant: 2.8 mW/°C (in still air) Heat dissipation constant: 2.5 mW/°C
(in still air) (in still air)
Features – Resin DIP type with built-in multilayer – Excellent reliability, high responsive- – Plastic case compliant to
element ness, high heat resistance Food Hygiene Act
– Good heat responsiveness due to its – 3 types are available – Highly waterproof
small size Epoxy (Ø 5.5 mm): Priority given to – Inexpensive
heat responsiveness
Epoxy (Ø 6.0 mm): Compatible with
copper case type of Ø 6.0 mm
Epoxy screw fix: superior surface
temperature detection
Applications Temperature measurement Temperature measurement Home appliances
Surface temperature detection Consumer electronics
NTC Sensors
Series NTC sensors – Plastic case type, NTC sensors NTC sensors
oil temperature sensor NTCDS series NTCGF series
NTCDP series
Technical Nominal resistance: Size: 3.0 × Ø 1.8 mm … 4.0 × Ø 2.0 mm Size: 6.0 × Ø 3.5 mm
data R20 = 2.5 kV ±3% (20 °C) Operating temperature: Resin DIP type
B constant: B20/80 = 3520 K ±2% –40 … +250 °C (Lead wire Ni plating), Operating temperature:
Operating temperature: –40 … +165 °C –40 … +125 °C (Lead wire Sn plating) –30 … +100 °C
Thermal time constant: 60 s max. Heat dissipation constant: Heat dissipation constant:
(in still oil) 1 … 2 mW/°C (in still air) 4 mW/°C (in still air)
Heat dissipation constant: 5 mW/°C Thermal time constant: Thermal time constant:
(in still air) 10 … 20 s max. (in still air) 30 s max. (in still air)
Insulation resistance (between lead Insulation resistance (between lead
and glass): 50 MV min. (DC, 500 V) and thermistor):
5 MV min. (DC, 500 V)
TDK EPCOS
NTC Sensors
Features – Measurement directly in the winding of the motor – Screw-on sensor for battery
– Mechanically protected by plastic housing – Mechanically protected by plastic housing
– High insulation voltage up to 2000 V – Easy mounting and good thermal coupling
– Available with different connectors, RT-curves and – Available with different connectors, RT-curves and
cable lengths cable lengths
Applications Temperature measurement in stator of electric motor Temperature measurement of batteries in electric cars
Pressure Sensors
Features – Very small and variable pressure sensor die – Differential pressure
– Available for absolute, gauge and rear side – Pressure transmitter with high media resistance for
absolute measurements both pressure ports with stainless steel diaphragms
Applications Automotive, medical, industrial and consumer applications Industrial, medical and automotive applications
TDK EPCOS
Pressure Sensors
Applications Industrial, medical and automotive applications Industrial, medical and automotive applications
Humidity Sensors
Applications Industrial and measuring equipment Air conditioners, humidifiers, dehumidifiers, dryers,
Consumer and office equipment refrigerators, PPC, LBP
TDK EPCOS
Applied Sensors
Applications Toner density, quantity in printers Toner detectors for copiers, laser printers
Detectors for coffee and other powders in automatic
beverage vending machines, detectors for powders
Applied Sensors
Features – 3-terminal type separate excitation oscillation formula – Low cost sensor
– Piezoelectric ceramic sensor element – Measures the rotation speed of gear and rotation angle
– Diecast finish of cam crank
– Highly resistant to external vibrations – Highly precise digital output due to integration of
– Stable detection characteristics components into an IC package
– Can detect both magnetic and non-magnetic powders – Designed to tolerate extreme temperatures
(–30 … +150 °C)
– Probe distance can be varied over a wide range
– Built-in surge voltage suppression circuit
Applications Toner detectors for copiers, laser printers Automotive: angle, speed sensing
Detectors for coffee and other powders in automatic
beverage vending machines, detectors for powders
TDK EPCOS
Applied Sensors
Technical Measured voltage range Ve: –1000 … 0 V Measured voltage range Ve: 0 … +1000 V
data Power supply voltage: 24 V ±10% Power supply voltage: 24 V ±10%
Output voltage (measured voltage) V0: Output voltage (measured voltage) V0:
2.5 (–500), 4.5 (–900) V 0 (0), 2.5 (+500), 4.5 (+900) V
Output variation ΔV0: ±0.05 Output variation ΔV0: ±0.05
Response time: 20 ms max. Response time: 20 ms max.
Operating temperature: 0 … +50 °C Operating temperature: 0 … +50 °C
Features – Stable output performance is maintained for long – Stable output performance is maintained for long
periods periods
– Quick responsiveness of high speed 11 ms (typical) – Quick responsiveness of high speed 11 ms (typical)
realized realized
– The range of detector output (0 to 4.5 V) fluctuations is – The range of detector output (0 to 4.5 V) fluctuations is
limited to less than ±0.05 V limited to less than ±0.05 V
Applications Surface electrical potential measurements in various Surface electrical potential measurements in various
equipment, including drum or paper in a copier, laser equipment, including drum or paper in a copier, laser
printer printer
TDK EPCOS
Series General use – SMD Mid voltage – SMD High voltage – SMD
C, CGA series C, CGA series C series
Technical Size: 0402 … 5750 Size: 1005 … 5750 Size: 3216 … 5750
data Temp. characteristic: CH, C0G, JB, SL, Temp. characteristic: C0G, X7R, X7S, Temp. characteristic: C0G, X7S, X7R
X7S, X7R, X5R, X6S X6S, X7T Rated voltage: 1 … 3 kV
Rated voltage: 4 … 50 V Rated voltage: 100 … 630 V Capacitance: 10 pF … 47 nF
Capacitance: 0.5 pF … 100 µF Capacitance: 100 pF … 15 µF
Features – Wide range of case size and superior – Unique design allows for higher – Advance design provides improved
dimension precision voltage in smaller case size withstanding voltage
– Available in EIA class 1 and – Available in 100, 250, 450 and 630 V – Available rating up to 3000 V
2 dielectrics up to 50 V
TDK EPCOS
Features – Improved bending resistance and temperature cycle – Advance design for twice the capacitance on single
performance footprint
– Termination technology available for most case sizes – Improved vibration and thermal/mechanical stress
including arrays performance
– Lower ESR and ESL than ALU and TA capacitors
Features – Flipped geometry permits lower inductance than – Allows for reduction of PCB space and mounting time
standard capacitor – Unique electrode design reduces crosstalk
– Special design allows for adequate high frequency – Also available in soft termination for higher reliability
current to IC performance
TDK EPCOS
Series Open mode – SMD 2-in-1 array & soft termination – SMD
CGA series CKG series
Features – Unique design allows increased resistance to – Improved ruggedness against mechanical stress
mechanical bending (e.g. bending, dropping)
– Improved performance in vibration and electrical – Allows reduction of PCB space and mounting time
stresses
Features – AgPdCu termination for conductive glue mounting – Unique internal structure allows cancelation of magnetic
– Improved mechanical/thermal strength when used with fields to reduce equivalent series inductance
conductive glue – Eight-sided terminal electrode design in one capacitor
TDK EPCOS
Features – Dipped radial leaded ceramic capacitors are multilayer – High reliability
ceramic capacitors attached with solder coated wire – Low dissipation factor, and decreased self-heating
leads and dipped with UL94V-0 approved resin temperature in high frequency and high voltage
– Provides large electrostatic capacitance applications
– Leads are formed with a “kink” to achieve consistent – Halogen-free external resin coating
insertion heights and to facilitate the release of gases
during soldering for dramatically improved solderability
– Taping specifications for automatic insertions can be
met
CS series
Temp. characteristic: B, SL, Z5U, F
Rated voltage: Eac X1/440 V, Y2/300 V
Capacitance: 10 pF … 10 nF
Features – Compliant with safety standards – Low dissipation and excellent voltage/capacitance
– Flame-resistant, reinforced outer insulation prevents fires, characteristics
electrical shock, and other potential hazards – Epoxy-encapsulated to meet requirements of high
– Halogen-free external resin coating voltage applications
TDK EPCOS
Applications Blocking, coupling, decoupling, bypassing, electronic, ignition in industrial, lighting, automotive,
information technology, entertainment electronics and household appliances
Applications AC filtering in industrial, lighting, automotive, General purpose, snubbering, resonance, ignition,
information technology, entertainment electronics and AC and DC filtering in industrial, lighting, automotive,
household appliances entertainment electronics and household appliances
TDK EPCOS
Applications Power factor correction, decoupling, coupling, switching in Snubbering, resonance in industrial, lighting, automotive,
industrial, lighting, automotive, entertainment electronics entertainment electronics and household appliances
and household appliances
Series MKP DC link High Density MKP DC link High Power MKP snubber
B32774 … B32778 B32674 … B32678 B32656S… B32658S
– High density of capacitance per – High power: density of IRMS – Very low ESL, ESR
volume current per capacitance – Thermal, mechanical stability
– Low losses with high current – High frequency ripple current – 17 terminal options
capability
Applications DC link, DC filtering, decoupling in industrial, lighting, automotive, Snubbering IGBT module in
entertainment electronics and household appliances industrial, lighting, automotive,
entertainment electronics and
household appliances
TDK EPCOS
Features – Polypropylene (PP) film dielectric metallized on one side and metal foil – Polypropylene (PP) film dielectric
electrodes metalized on one side and metal foil
– It allows maximum pulse handling capability together with maximum electrodes
ripple current and frequency – Provides maximum pulse handling
– Crimped and straight wire terminals – Plastic case (UL94V-0) capability together with the
– Highest possible contact reliability – Mechanical stability maximum ripple current and
– Very high pulse strength – Very high pulse strength frequency
– High voltage – Very low ESL, ESR
– Very high currents – Thermal, mechanical stability
Applications Smothing, snubbering, high frequency AC loads in industrial, lighting and Snubbering IGBT module in
medical electronics with very high pulse, frequency and current demand industrial, lighting and medical
electronics with very high pulse,
frequency and current demand
X1 530 V:
Rated capacitance:
1 nF … 5.6 µF
Rated voltage:
530 V AC
Features – Standard EMI suppression capacitor for EMC filtering – Standard EMI suppression capacitor for EMC filtering
– Good self-healing properties – Good self-healing properties
– High voltage capability – High voltage capability
– Very small dimensions – Very small dimensions
Applications Across-the-line applications in industrial, lighting, Line-to-ground applications in industrial, lighting, medical,
medical, entertainment electronics and entertainment electronics and household appliances
household appliances
TDK EPCOS
Applications Across-the-line applications in industrial, lighting, medical, Designed for AC input and AC output filters e.g. UPS
entertainment electronics and household appliances
AC Film Capacitors
Series MotorCap P0 (S0) plastic MotorCap (S3) compact Super MotorCap P2 (S2) Alu
B3232 … B3235 … B3233 …
Technical Rated voltage: 250, 420, 470 V AC Rated voltage: 400, 450 V AC Rated voltage: 420, 450 V AC
data Rated capacitance: 1 … 60 µF Rated capacitance: 2 … 20 µF Rated capacitance: 1 … 60 µF
Plastic can Plastic can Aluminum can
Applications General sine wave applications, Mainly as motor run capacitor, Mainly as motor run capacitor,
mainly as motor run capacitor e.g. for refrigeration units, pumps e.g. for household appliances,
heat pumps
AC Film Capacitors
Applications Mainly as motor run capacitor, e.g. for air conditioning Mainly as motor run capacitor, e.g. for household
appliances, heat pumps
TDK EPCOS
Applications Automatic capacitor banks Residential PFC Outdoor low voltage applications
Fixed PFC For installation in surroundings with
Detuned PFC systems high dust or moisture concentration
TDK EPCOS
Technical Operating voltage: 110 … 230 V AC Voltage: 400 … 690 V Voltage range:
data Measuring current: 30, 300, 3000 A Output range: 12.5 … 100 kvar TSM-LC(X): 230 … 690 V,
Measuring voltage: depending on type
3 x 30 … 440 V AC TSM-HV: 690 V
3 x 50 … 760 V AC
Output range:
TSM-LC(X): 10 … 200 kvar,
depending on type
TSM-HV: 50 and 200 kvar
Features – Comfortable measuring tool – Series J110/J230 for usage in – Fast electronically controlled
– 1 GB memory card included PFC systems without reactors thyristor switch
– PC software for evaluation of – Series N110/N230 for usage in – Easy installation
measured values included PFC systems with reactors – Very short switching times
– cUL approval
– CCC approval up to 75 kvar
Applications Three-phase measuring, display Damping of inrush current in low Main supply networks with high load
and storage of electric parameters in voltage PFC systems fluctuations for dynamic PFC systems,
LV grids For PFC systems with/without reactors e.g. presses, welding machines,
elevators, cranes, wind turbines
TDK EPCOS
PFC Capacitors and Key Components for Power Quality Solutions Power Capacitors
Series Reactors PQSine – Active harmonic filter and MKK DC/DCI, DCI-R/DC-R
B44066D … power optimizer B25650 (gas), B25640 (resin),
B25750 (oil)
Technical Voltage: 400 and 440 V Input voltage: Rated capacitance: 100 µF … 20 mF
data Output range: 10 … 100 kvar 3-wire: 180 V … 525 V Nominal voltage: 800 … 6500 V
Detuning factor: 5.67, 7, 14% 4-wire: 180 V … 460 V Operating temp.: –55 … +80 °C
Frequency: 50 or 60 Hz Rated filter current: 60 … 600 A Gas impregnation (DC)
Wall and floor mounting variants Oil impregnation (DCI)
Modular system Resin impregnation (DCI-R, DC-R)
Features – High harmonic loading capability – Compact design – High peak current handling
– Very low losses – Advanced digital control capability
– Low noise emission – Harmonic mitigation – Low losses
– Temperature protection by – Active load balancing – Long useful life
microswitch (NC) – Ultra-fast reactive power factor – Very high reliability
compensation (inductive and – Rectangular case
capacitive) – Flat windings
– Overpressure switch
possible, self-healing
Applications Avoiding of resonance conditions Datacenters, UPS systems, DC link
Tuned and detuned harmonic filters Green energy power generation Resonant filters
Reduction of power losses (e.g. Photovoltaic and Wind turbines), Power modules for HVDC
Industrial production facilities, office
buildings and shopping centres
Power Capacitors
Features – Low self-inductivity – High RMS current handling – High peak current handling
– High volume fill factor capability capability
– Very good self-healing – Self-healing – Overpressure disconnector
– Compact size – Aluminum can – Self-healing
– Flexible dimensions – Customized configurations – Customized configurations
– Customer specific designs – UL-certification – UL-certification
Applications DC link for LV converters, specially DC link capacitor for voltage Filtering for e.g. uninterruptible power
HEV applications converters in renewable energies supplies, renewable energies
TDK EPCOS
Power Capacitors
Applications Industrial and general, AC filter applications, renewable High performance output filtering, especially in
energies wind power applications
Power Capacitors
TDK EPCOS
Technical Rated voltage: 16 … 600 V Rated voltage: 350 … 500 V Rated voltage: 10 … 600 V
data Rated capacitance: 560 … 680 000 µF Rated capacitance: 390 … 3300 µF Rated capacitance: 47 … 68 000 µF
Dimensions: Dimensions: Dimensions:
35.7 x 55.7 … 90 x 220.7 mm 35 x 45 … 50 x 100 mm 22 x 25 … 35 x 55 mm
Features – High ripple current capability – High ripple current capability – High ripple current capability
– Long useful life (>20 years) – Long useful life (>20 years) – Long useful life (>20 years)
– Self-extinguishing electrolyte upon – Optional PET insulation – Optional PET insulation
request – Optional PET insulation cap on – Optional PET insulation cap on
– Special designs for base cooling terminal side terminal side
– Optional PET insulation – Compact designs – Compact designs
– Compact designs
Applications Frequency converters Frequency converters Frequency converters
DC link for wind energy and solar DC link for solar inverters DC link for solar inverters
inverters Uninterruptible power supplies Uninterruptible power supplies
Uninterruptible power supplies Professional power supplies Professional power supplies
Professional power supplies On-board charger (e-Mobiity)
Features – High vibration stability up to 40 g – High vibration stability up to 45 g – High vibration stability up to 45 g
– High ripple current capability – High ripple current capability – Low inductance
– Low ESR at high temperatures – Low ESR at high temperatures – High ripple current capability
– Long useful life up to 10 000 h at – Long useful life up to 10 000 h at – Long useful life up to 10 000 h
+125 °C +125 °C at +125 °C
– High temperature range up to – High temperature range up to
+150 °C +150 °C
– Low ESR at high temperatures
Applications High energy efficiency in automotive High energy efficiency in automotive High energy efficiency in automotive
applications e.g. power steering, applications e.g. motor management, applications e.g. motor management,
motor management power steering, fan control, trans- power steering, fan control, trans-
mission control, wiper system, DC-link mission control, DC-link (≤ 250 V) for
(≤ 250 V) for HEV HEV
TDK EPCOS
TDK EPCOS
TDK EPCOS
Ferrite Magnets
Series FB series – FB12B, FB12H material FB series – FB9B, FB9H, FB9N material
Technical Residual flux density: 460 ±10 … 470 ±10 mT Residual flux density: 430 ±10 … 460 ±10 mT
data Coercive force: 340 ±12 … 345 ±15 kA/m Coercive force: 278.5 ±12 … 342.2 ±12 kA/m
Intrinsic coercive force: 380 ±12 … 430 ±15 kA/m Intrinsic coercive force: 286.5 ±12 … 397.1 ±12 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
41.4 ±1.6 … 43.1 ±1.6 kJ/m3 35.0 ±1.6 … 40.4 ±1.6 kJ/m3
Ferrite Magnets
Series FB series – FB6B, FB6E, FB6H, FB6N material FB series – FB5B, FB5D, FB5DH, FB5H material
Technical Residual flux density: 380 ±10 … 440 ±10 mT Residual flux density: 400 ±10 … 420 ±10 mT
data Coercive force: 258.6 ±12 … 302.4 ±12 kA/m Coercive force: 254.6 ±12 … 298.4 ±12 kA/m
Intrinsic coercive force: 262.6 ±12 … 393.9 ±12 kA/m Intrinsic coercive force: 262.6 ±16 … 322.3 ±12 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
27.5 ±1.6 … 36.7 ±1.6 kJ/m3 30.3 ±1.6 … 33.4 ±1.6 kJ/m3
Features – Good balance of Br and Hc values at high levels – Deliver high Br and a relatively high level of Hc.
– Particularly suited for high powered motors with large – Excellent cost performance
demagnetizing fields – Suitable for a diverse range of small, high-performance
motors
TDK EPCOS
Features – Magnetic characteristics reach 49MGOe in maximum energy product (BH) max,
achieving 50 to 80% higher performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile strength than rare-earth
cobalt magnets, making handling easier than before
Series NEOREC series – NEOREC50B, NEOREC50H material NEOREC series – NEOREC47B, NEOREC47H material
Technical Residual flux density: 1420 ±20 mT Residual flux density: 1390 ±20 … 1390 ±30 mT
data Coercive force: 1074 ±48 … 1097 ±48 kA/m Coercive force: 1035 ±56 … 1067 ±48 kA/m
Intrinsic coercive force: ≧1114 … ≧1353 kA/m Intrinsic coercive force: ≧1114 … ≧1273 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
390 ±16 kJ/m3 366 ±16 … 374 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product (BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
TDK EPCOS
Series NEOREC series – NEOREC46HF, NEOREC46HG material NEOREC series – NEOREC45SH material
Technical Residual flux density: 1350 ±20 … 1380 ±30 mT Residual flux density: 1360 ±30 mT
data Coercive force: 1043 ±48 … 1066 ±56 kA/m Coercive force: 1051 ±56 kA/m
Intrinsic coercive force: ≧1273 … ≧1432 kA/m Intrinsic coercive force: ≧1671 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
352 ±16 … 368 ±16 kJ/m3 357 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product(BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
Technical Residual flux density: 1360 ±30 mT Residual flux density: 1310 ±30 mT
data Coercive force: 1003 ±56 kA/m Coercive force: 1012 ±56 kA/m
Intrinsic coercive force: ≧1353 kA/m Intrinsic coercive force: ≧1830 kA/m
Maximum energy product (BH) max: 350 ±16 kJ/m3 Maximum energy product (BH) max: 331 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product (BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
TDK EPCOS
Technical Residual flux density: 1300 ±30 … 1330 ±30 mT Residual flux density: 1300 ±30 mT
data Coercive force: 979 ±56 … 987 ±56 kA/m Coercive force: 971 ±56 kA/m
Intrinsic coercive force: ≧1114 … ≧1671 kA/m Intrinsic coercive force: ≧1353 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max: 326 ±16 kJ/m3
326 ±16 … 334 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product (BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
Technical Residual flux density: 1285 ±30 … 1330 ±30 mT Residual flux density: 1260 ±30 mT
data Coercive force: 971 ±56 … 995 ±56 kA/m Coercive force: 963 ±56 kA/m
Intrinsic coercive force: ≧1353 … ≧2109 kA/m Intrinsic coercive force: ≧1990 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
310 ±16 … 319 ±16 kJ/m3 294 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product (BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g/cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
TDK EPCOS
Series NEOREC series – NEOREC37H material NEOREC series – NEOREC35NX, NEOREC35UX material
Technical Residual flux density: 1240 ±30 mT Residual flux density: 1200 ±30 mT
data Coercive force: 923 ±56 kA/m Coercive force: 920 ±56 … 923 ±56 kA/m
Intrinsic coercive force: ≧1353 kA/m Intrinsic coercive force: ≧2626 … ≧2388 kA/m
Maximum energy product (BH) max: Maximum energy product (BH) max:
294 ±16 kJ/m3 271 ±16 … 278 ±16 kJ/m3
Features – Magnetic characteristics reach 49MGOe in maximum – Magnetic characteristics reach 49MGOe in maximum
energy product (BH) max, achieving 50 to 80% higher energy product (BH) max, achieving 50 to 80% higher
performance than rare-earth cobalt magnet performance than rare-earth cobalt magnet
– Specific gravity is 7.4 g /cm3 more than 10% lower than – Specific gravity is 7.4 g/cm3 more than 10% lower than
that of rare-earth cobalt magnet that of rare-earth cobalt magnet
– Higher mechanical strength such as bending and tensile – Higher mechanical strength such as bending and tensile
strength than rare-earth cobalt magnets, making strength than rare-earth cobalt magnets, making
handling easier than before handling easier than before
Applications Green Energy (Wind power) Green Energy (Wind power)
Home appliances Home appliances
Automotive electronics Automotive electronics
Features – Magnetic characteristics at the mass production level reach 49MGOe in maximum energy product
(BH) max, achieving 50 to 80% higher performance than rare-earth cobalt magnet
– The specific gravity is 7.4 g/cm3 more than 10% lower than that of rare-earth cobalt magnet.
Ideal for meeting miniaturization and weight reduction needs
– Higher mechanical strength such as bending and tensile strength than rare-earth cobalt magnets,
making handling easier than before
– Since the main raw materials are neodymium and iron, both abundant resources, stable supply
is assured
TDK EPCOS
Applications For electrode films and plastic plates for transparent touch panels
For electronic paper/electronic books/electromagnetic wave shields
TDK EPCOS
Wireless Charging
Series Receivers solutions Transmitter solutions WLC + NFC combo coils Rx module
Technical TDK offers a full range of passive technologies and products for wireless power transfer according with
data specifications of the Qi consortium.
Qi Shielding materials
Qi Tx coil solutions
Qi Rx coil solutions, including combos with NFC
Qi Rx modules
Applications Smartphones
Mobile devices
Tablet PC
Audio video applications
Healthcare applications
Automotive applications
TDK EPCOS
The following applies to all products named in this 4. In order to satisfy certain technical requirements, some of
publication: the products described in this publication may contain
1. Some parts of this publication contain statements about substances subject to restrictions in certain jurisdic-
the suitability of our products for certain areas of ap- tions (e.g. because they are classed as hazardous).
plication. These statements are based on our knowledge Useful information on this will be found in our Material
of typical requirements that are often placed on our prod- Data Sheets on the Internet (www.epcos.com/material).
ucts in the areas of application concerned. We neverthe- Should you have any more detailed questions, please con-
less expressly point out that such statements cannot be tact our sales offices.
regarded as binding statements about the suitability 5. We constantly strive to improve our products. Conse-
of our products for a particular customer application. quently, the products described in this publication
As a rule, EPCOS is either unfamiliar with individual cus- may change from time to time. The same is true of the
tomer applications or less familiar with them than the corresponding product specifications. Please check
customers themselves. For these reasons, it is always ul- therefore to what extent product descriptions and speci-
timately incumbent on the customer to check and decide fications contained in this publication are still applicable
whether an EPCOS product with the properties described before or when you place an order.
in the product specification is suitable for use in a partic- We also reserve the right to discontinue production
ular customer application. and delivery of products. Consequently, we cannot
2. We also point out that in individual cases, a malfunc- guarantee that all products named in this publication will
tion of electronic components or failure before the always be available.
end of their usual service life cannot be completely The aforementioned does not apply in the case of
ruled out in the current state of the art, even if they are individual agreements deviating from the foregoing for
operated as specified. In customer applications requir- customer-specific products.
ing a very high level of operational safety and especially in
customer applications in which the malfunction or failure 6. Unless otherwise agreed in individual contracts, all
of an electronic component could endanger human life or orders are subject to the current version of the “Gen-
health (e.g. in accident prevention or life-saving systems), eral Terms of Delivery for Products and Services in
it must therefore be ensured by means of suitable design the Electrical Industry” published by the German
of the customer application or other action taken by the Electrical and Electronics Industry Association (ZVEI).
customer (e.g. installation of protective circuitry or 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode,
redundancy) that no injury or damage is sustained by third CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap,
parties in the event of malfunction or failure of an electron- DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue,
ic component. MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap,
3. The warnings, cautions and product-specific notes PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
must be observed. SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in
other countries. Further information will be found on the
Internet at www.epcos.com/trademarks.
77
The world of electronic components,
modules and systems within a mouse click
www.epcos.com
www.global.tdk.com
78
© EPCOS AG · A TDK Group Company
Edition 2015 · Ordering No. EPC:65060-7600 · Printed in Germany · PP 111410.