Académique Documents
Professionnel Documents
Culture Documents
Copy the files from the USB drive to your local drive.
Switch off the firewall (and user authentication under Vista)
Execute “tibinstall\install_tibco54.cmd”
Open a commandprompt and type the following command to listen to a set of subject
that start with “test.”
A more thorough verification will take place after the next exercise.
Close both command prompts.
EXERCISE 2: Create a TIBCO domain
Click “Next”
On the lefthand side select “Domain Configuration” and on the righthand side “Create
a new Administration Domain”. Click “Next”
Choose a appropriate domain name for your Administration Domain.
Set Encoding to UTF-8
Select “Local Application Data”
Scroll down and select “Show advanced” and write down the portnumbers used for
your domain. Click next
Accept these portnumbers or choose your own – and write them down.
Click next
Choose user / password for your Administration Domain
Write this down – you will need this later when you log onto the administrator
Click “Next”
Click “Next”
Start these services ( Settings -> Control Panel -> Administrative Tools )
Set Startup Type to Manual and start the services – This may take a while for the
Administrator.
Note the differences – We will discuss these during or after the exercise
Delete a Domain
We now have two domains. One is sufficient. This means that we can now delete
one of the two.
Make sure that your domain services are stopped and that your services window is
closed before deleting a domain.
Click “Next”
Click “Exit”
EXERCISE 3: EMS
Emsadmin – (start >> programs >> tibco >> ems >> Start EMS Administration tool)
Work out for your self how this works.
Use “help”
AFKL.Training.Queue1
AFKL.Training.Queue2
AFKL.Training.Queue3
AFKL.Training.Queue4
AFKL.Training.Queue5
AFKL.Training.Queue6
AFKL.Training.Topic1
AFKL.Training.Topic2
AFKL.Training.Topic3
AFKL.Training.Topic4
AFKL.Training.Topic5
AFKL.Training.Topic6
You can check yourself with the command “show” (type “help show” for details)
Login as admin
Exit
Install EMS plug-in for the Administrator
Click “Next”
Click Next
Click “Next”
Fill in the desired credentials and
Click “Next”
Click “Test”
Click “OK”
Click “Next”
Click “Exit”.
Perform the same actions as you did using tibemsadmin tool. But now using the
Administrator.
<microagent>
<classname>com.tibco.tibjms.admin.hawk.HawkController</classname>
<!-- Change to above from HawkController to HawkListener if
you only need to monitor the JMS daemon. -->
<arguments>
<arg>-user</arg>
<arg>admin</arg>
<arg>-password</arg>
<arg></arg> <<<<<< empty password
<!-- If you are using an encrypted password comment out
..
Check administrator
EXERCISE 5: Administrator
Hawk oefeningen
Maak een rulebase
Omgevingsvariabelen
Mar utility
Admin oefeningen
Deploy ear file
LB / FT settings???
Deploy marfile
Check EMS servers
User administration