0 évaluation0% ont trouvé ce document utile (0 vote)
191 vues6 pages
This document lists numerous standards reference codes for specifications relating to electrical wire and cable components. It includes standards for different types of conductors (copper, aluminum, steel-reinforced), insulation materials (paper, polyethylene, rubber), jacketings, and test methods. The standards are from organizations like the American Society for Testing and Materials (ASTM) and the Association of Edison Illuminating Companies (AEIC) and cover physical and electrical requirements and tests.
Description originale:
Estandares para cables
Titre original
IEEE Std C57.00 2010 IEEE Standard for General Requirements for Liquid Immersed DistributionPowerand Regulating Transf
This document lists numerous standards reference codes for specifications relating to electrical wire and cable components. It includes standards for different types of conductors (copper, aluminum, steel-reinforced), insulation materials (paper, polyethylene, rubber), jacketings, and test methods. The standards are from organizations like the American Society for Testing and Materials (ASTM) and the Association of Edison Illuminating Companies (AEIC) and cover physical and electrical requirements and tests.
This document lists numerous standards reference codes for specifications relating to electrical wire and cable components. It includes standards for different types of conductors (copper, aluminum, steel-reinforced), insulation materials (paper, polyethylene, rubber), jacketings, and test methods. The standards are from organizations like the American Society for Testing and Materials (ASTM) and the Association of Edison Illuminating Companies (AEIC) and cover physical and electrical requirements and tests.
AEIC CS 1: Especificación para Solid-Type ASTM B 226: Standard Specification for
Impregnated-Paper-Insulated Metallic Cored, Annular, Concentric-Lay-Stranded Sheathed Cable Copper Conductors AEIC CS2: Especificación para ASTM B 227: Standard Specification for Impregnated-Paper and Laminated Paper- Hard-Drawn Copper-Clad Steel Wire Polypropylene Insulated Cable, High- ASTM B 228: Standard Specification for Pressure Pipe-Type Concentric-Lay-Stranded Copper-Clad AEIC CS3: Especificación para Steel Conductors Impregnated-Paper-Insulated, Metallic ASTM B 229: Standard Specification for Sheathed Cable, Low Pressure Gas-Filled Concentric-Lay-Stranded Copper and Type Copper-Clad Steel Composite Conductors AEIC CS4: Especificación para ASTM B 230: Standard Specification for Impregnated-Paper-Insulated Low and Aluminum 1350-H19 Wire for Electrical Medium Pressure Self Contained Liquid Purposes Filled Cable ASTM B 231: Standard Specification for AEIC CS5: Especificación para Concentric-Lay-Stranded Aluminum 1350 Thermoplastic and Crosslinked Conductors Polyethylene Insulated Shielded Power ASTM B 232: Standard Specification for Cables Rated 5 Through 69 kV Concentric-Lay-Stranded Aluminum AEIC CS6: Especificación para Conductors, Coated Steel-Reinforced Propylene Rubber Insulated Shielded (ACACARSR) Power Cables Rated 5 Through 69 kV ASTM B 233: Standard Specification for AEIC CS7: Especificación para Crosslinked Aluminum 1350 Drawing Stock for Polyethylene Insulated Shielded Power Electrical Purposes Cables Rated 46 Through 138 kV ASTM B 246: Standard Specification for AEIC CS8: Especificación para Extended Tinned Hard-Drawn and Medium-Hard- Dielectric, Shielded Power Cables Rated 5 Drawn Copper Wire for Electrical through 46 kV Purposes ASTM B 1: Standard Specification for ASTM B 258: Standard Specification for Hard-Drawn Copper Wire Standard Nominal Diameters and Cross- ASTM B 2: Standard Specification for Sectional Areas of AWG Sizes of Solid Medium-Hard-Drawn Copper Wire Round Wires Used as Electrical ASTM B 3: Standard Specification for Soft Conductors or Annealed Copper Wire ASTM B 263: Standard Test Method for ASTM B 8: Standard Specification for Determination of Cross-Sectional Area of Concentric-Lay Stranded Copper Stranded Conductors Conductors, Hard, Medium-Hard or Soft ASTM B 286: Standard Specification for ASTM B 33: Standard Specification for Copper Conductors for Use in Hookup Tinned Soft or Annealed Copper Wire for Wire for Electronic Equipment Electrical Purposes ASTM B 298: Standard Specification for ASTM B 105: Standard Specification for Silver-Coated Soft or Annealed Copper Hard-Drawn Copper Alloy Wires for Wire Electrical Conductors ASTM B 324: Standard Specification for ASTM B 170: Standard Specification for Nickel-Coated Soft or Annealed Copper Oxygen-Free Electrolytic Copper Wire ASTM B 172: Standard Specification for ASTM B 341: Standard Specification for Rope-Lay-Stranded Copper Conductors Aluminum-Coated (Aluminized) Steel Core Having Bunch-Stranded Members, for Wire for Aluminum Conductors, Steel- Electrical Conductors Reinforced (ACSR/AZ) ASTM B 173: Standard Specification for ASTM B 355: Standard Specification for Rope-Lay-Stranded Copper Conductors Nickel-Coated Soft or Annealed Copper Having Concentric-Stranded Members, for Wire Electrical Conductors ASTM B 397: Standard Specification for ASTM B 174: Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Bunch-Stranded Copper Conductors for 5005-H19 Conductors Electrical Conductors ASTM B 398: Standard Specification for ASTM B 189: Standard Specification for Aluminum-Alloy 6201-T81 Wire for Lead-Coated and Lead-Alloy-Coated Soft Electrical Purposes Copper Wire for Electrical Purposes ASTM B 399: Standard Specification for ASTM B 193: Standard Test Method for Concentric-Lay-Stranded Aluminum-Alloy Resistivity of Electrical Conductor Materials 6201-T81 Conductors NORMAS DE REFERENCIA ASTM B 400: Standard Specification for Alloy Wire for Electronic Application Compact Round Concentric-Lay-Stranded ASTM B 682: Standard Specification for Aluminum 1350 Conductors Standard Metric Sizes of Electrical ASTM B 401: Standard Specification for Conductors Compact Round Concentric-Lay-Stranded ASTM B 701: Standard Specification for Aluminum Conductors, Steel-Reinforced Concentric-Lay-Stranded Self-Damping (ACSR/COMP) Aluminum Conductors, Steel-Reinforced ASTM B 416: Standard Specification for (ACSR/SD) Concentric-Lay-Stranded Aluminum-Clad ASTM B 711: Standard Specification for Steel Conductors Concentric-Lay-Stranded Aluminum-Alloy ASTM B 452: Standard Specification for Conductors, Steel Reinforced (AACSR) Copper-Clad Steel Wire for Electronic (6201) Application ASTM B 738: Standard Specification for ASTM B 470: Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bonded Copper Conductors for Use in Bunch Stranded Copper Conductors for Hookup Wires for Electronic Equipment Use as Electrical Conductors ASTM B 496: Standard Specification for ASTM B 778: Standard Specification for Compact Round Concentric-Lay-Stranded Shaped Wire Compact Concentric-Lay- Copper Conductors Stranded Aluminum Conductors (AAC/TW) ASTM B 498: Standard Specification for ASTM B 779: Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire Shaped Wire Compact Concentric-Lay- for Aluminum Conductors, Steel- Stranded Aluminum Conductors, Steel Reinforced (ACSR) Reinforced (ACSR/TW) ASTM B 500: Standard Specification for ASTM B 784: Standard Specification for Zinc-Coated (Galvanized), Zinc-5% Modified Concentric-Lay-Stranded Copper Aluminum Mischmetal Alloy-Coated, and Conductors for Use in Insulated Electrical Aluminum-Coated (Aluminized) Stranded Cables Steel Core for Aluminum Conductors, ASTM B 785: Standard Specification for Steel-Reinforced (ACSR) Compact Round Modified Concentric-Lay- ASTM B 501: Standard Specification for Stranded Copper Conductors for Use in Silver-Coated, Copper-Clad Steel Wire for Insulated Electrical Cables Electronic Application ASTM B 786: Standard Specification for ASTM B 502: Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum-Clad Steel Core Wire for Aluminum 1350 Conductors for Aluminum Conductors, Aluminum-Clad Subsequent Insulation Steel Reinforced ASTM B 787: Standard Specification for ASTM B 520: Standard Specification for 19 Wire Combination Unilay-Stranded Tin-Coated, Copper-Clad Steel Wire for Copper Conductors for Subsequent Electronic Application Insulation ASTM B 524: Standard Specification for ASTM B 801: Standard Specification for Concentric-Lay-Stranded Aluminum Concentric-Lay-Stranded Conductors of Conductors, Aluminum-Alloy Reinforced 8000 Series Aluminum Alloy for (ACAR, 1350/6201) Subsequent Covering or Insulation ASTM B 549: Standard Specification for ASTM B 802: Standard Specification for Concentric-Lay-Stranded Aluminum Zinc-5% Aluminum-Mischmetal Alloy- Conductors, Aluminum-Clad Steel Coated Steel Core Wire for Aluminum Reinforced (ACSR/AW) Conductors, Steel Reinforced (ACSR) ASTM B 559: Standard Specification for ASTM B 803: Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for High-Strength Zinc-5 % Aluminum- Electronic Application Mischmetal Alloy Coated Steel Core Wire ASTM B 606: Standard Specification for for Aluminum and Aluminum-Alloy High-Strength Zinc-Coated (Galvanized) Conductors, Steel Reinforced Steel Core Wire for Aluminum and ASTM D 149: Standard Test Method for Aluminum Alloy Conductors, Steel Dielectric Breakdown Voltage and Reinforced Dielectric Strength of Solid Electrical ASTM B 609: Standard Specification for Insulating Materials at Commercial Power Aluminum 1350 Round Wire, Annealed Frequencies and Intermediate Tempers, for Electrical ASTM D 470: Method of Testing Purposes Crosslinked Insulations and Jackets for ASTM B 624: Standard Specification for Wire and Cable High-Strength, High-Conductivity Copper- ASTM D 866: Specification for Styrene- NORMAS DE REFERENCIA Butadiene (SBR) Synthetic Rubber Jacket Cable for Wire and Cable ASTM D 4245: Specification for Ozone- ASTM D 1047: Specification for Polyvinyl Resistant Thermoplastic Elastomer Chloride (PVC) Jacket for Wire and Cable Insulation for Wire and Cable, 90°C Dry - ASTM D 1351: Specification for 75°C Wet Operation Polyethylene Insulation for Wire and Cable ASTM D 4246: Specification for Ozone- ASTM D 1352: Specification for Ozone- Resistant Thermoplastic Elastomer Resisting Butyl Rubber Insulation for Wire Insulation for Wire and Cable, 90°C and Cable Operation ASTM D 1523: Method for Synthetic ASTM D 4247: Specification for General- Rubber Insulation for Wire and Cable, 90° Purpose Black Heavy-Duty and Black Operation Extra-Heavy Duty Polychloroprene Jackets ASTM D 1679: Specification for Synthetic for Wire and Cable Rubber Heat and Moisture-Resisting ASTM D 4313: Specification for General Insulation for Wire and Cable, 75°C Purpose Heavy-Duty and Extra-Heavy- Operation Duty Crosslinked Chlorinated Polyethylene ASTM D 2219: Specification for Polyvinyl Jackets for Wire and Cable Chloride (PVC) Insulation for Wire and ASTM D 4314: Specification for General Cable, 60° Operation Purpose Heavy-Duty and Extra-Heavy- ASTM D 2220: Specification for Polyvinyl Duty Crosslinked Chlorosulfonated Polyethylene Chloride (PVC) Insulation for Wire and Jackets for Wire and Cable Cable, 75° Operation ASTM D 4363: Specification for ASTM D 2308: Specification for Thermoplastic Chlorinated Polyethylene Polyethylene Jacket for Electrical Insulated Jacket for Wire and Cable Wire and Cable ASTM D 4496: Test Method of DC ASTM D 2526: Specification for Ozone- Resistance or Conductance of Moderately Resisting Silicone Rubber Insulation for Wire Conductive Materials and Cable ASTM D 4568: Test Methods for ASTM D 2655: Specification for Crosslinked Evaluating Compatibility Between Cable Polyethylene Insulation for Wire and Cable Filling and Flooding Compounds and Rated 0 to 2000V Polyolefin Cable Materials ASTM D 2656: Specification for Crosslinked ASTM D 4967: Guide for Selecting Polyethylene Insulation for Wire and Cable Materials to Be Used for Insulation, Rated 2001 to 35000V Jacketing, and Strength Components in ASTM D 2768: Specification for General- Fiber Optic Cables Purpose Ethylene-Propylene Rubber Jacket ICEA P-32-382: ICEA Standards for Wire and Cable Publication for Short Circuit ASTM D 2770: Specification for Ozone- Characteristics of Insulated Cable Resisting Ethylene-Propylene Rubber ICEA P-45-482: ICEA Standards Integral Insulation and Jacket for Wire and Publication for Short-Circuit Performance Cable of Metallic Shields and Sheaths of ASTM D 2802: Specification for Ozone- Insulated Cable Resistant Ethylene-Propylene Rubber ICEA P-53-426: ICEA/NEMA Standards Insulation for Wire and Cable Publication for Ampacities, Including ASTM D 3004: Specification for Extruded Effect of Shield Losses for Single- Thermosetting and Thermoplastic Semi- Conductor Solid-Dielectric Power Cable Conducting Conductor and Insulation 15 kV through 69 kV (NEMA WC 50) Shields ICEA P-54-440: ICEA/NEMA Standards ASTM D 3485: Specification for Smooth- Publication for Ampacities of Cables in Wall Coilable Polyethylene (PE) Conduit Open-Top Cable Trays (NEMA WC 51) (Duct) for Preassembled Wire and Cable ICEA P-79-561: ICEA Guide for Selecting ASTM D 3554: Specification for Track- Aerial Cable Messengers and Lashing Wires Resistant Black Thermoplastic High Density ICEA P-81-570: ICEA Standards Polyethylene Insulation for Wire and Cable Publication for Direct Burial 600 Volt Cable ASTM D 3555: Specification for Track- with Ruggedized Extruded Insulation Resistant Black Crosslinked Thermosetting ICEA S-19-81: ICEA/NEMA Standards Polyethylene Insulation for Wire and Cable Publication for Rubber-Insulated Wire and ASTM D 4244: Specification for General- Cable for the Transmission and Distribution Purpose, Heavy-Duty and Extra-Heavy of Electrical Energy (NEMA WC 3) Duty Acrylonitrile-Butadiene/ Polyvinyl ICEA S-56-434: ICEA/ANSI Standards Chloride (NBR/PVC) Jackets for Wire and Publication for Polyolefin Insulated NORMAS DE REFERENCIA Communications Cables for Outdoor Use ICEA-S-93-639: ICEA/NEMA Standard for ICEA S-61-402: ICEA/NEMA Standards Shielded Power Cables Rated 5-46 KV for Publication for Thermoplastic-Insulated the Distribution of Electrical Energy (NEMA Wire and Cable for the Transmission and WC 74) Distribution of Electrical Energy (NEMA ICEA-S-94-649: Standard for Concentric WC 5) Neutral Cables Rated 5-46 KV ICEA S-66-524: ICEA/NEMA Standards ICEA S-95-658: ICEA/NEMA Standard for Publication for Cross-Linked- Non-shielded Power Cables Rated 2000 Thermosetting Polyethylene-Insulated Wire Volts or Less for the Distribution of and Cable for the Transmission and Electrical Energy (NEMA WC 70) Distribution of Electrical Energy (NEMA ICEA S-96-659: ICEA/NEMA Standard for WC 7) Non-shielded Cables Rated 2001-5000 ICEA S-67-401: ICEA/NEMA Standards Volts for use in the Distribution of Electrical Publication for Steel Armor and Energy (NEMA WC 71) Associated Coverings for Impregnated- ICEA S-97-682: Standard for Utility Paper-Insulated Cables (NEMA WC 2) Shielded Power Cable Rated 5-46 KV ICEA S-68-516: ICEA/NEMA Standards ICEA S-105-692: Standard for 600 Volt Publication for Ethylene-Propylene- Single Layer Thermoset Insulated Rubber-Insulated Wire and Cable for Utility Underground Distribution Cable the Transmission and Distribution of ICEA T-22-294: ICEA Standard Test Electrical Energy (NEMA WC 8) Procedures for Extended Time-Testing of ICEA S-70-547: ICEA/ANSI Standards Wire and Cable Insulations for Service in Publication for Weather-Resistant Wet Locations Polyolefin-Covered Wire and Cable ICEA T-25-425: ICEA Guide for ICEA S-73-532: ICEA/NEMA/ANSI Standards Establishing Stability of Volume Resistivity Publication for Control Cables (NEMA WC 57) for Conducting Polymeric Components of ICEA S-75-381: ICEA/NEMA/ANSI Power Cables Standards Publication for Portable and ICEA T-26-465: ICEA/NEMA Guide for Power Feeder Cables for Use in Mines and Frequency of Sampling Extruded Dielectric Similar Applications (NEMA WC 58) Power, Control, Instrumentation and Portable ICEA S-76-474: ICEA/ANSI Standards Cables for Test (NEMA WC 54) Publication for Neutral-Supported Power ICEA T-27-581: ICEA/NEMA Standard Test Cable Assemblies with Weather-Resistant Methods for Extruded Dielectric Power, Extruded Insulation, 600 Volts Control, Instrumentation and Portable ICEA S-77-528: ICEA/ANSI Standards Cables (NEMA WC 53) Publication for Outside Plant ICEA T-28-562: ICEA Standard Test Communications Cables, Specifying Metric Method for Measurement of Hot Creep of Wire Sizes Polymeric Insulations ICEA S-80-576: ICEA/ANSI Standards ICEA T-29-520: ICEA Standard for Vertical Publication for Communications Wire and Tray Flame Tests at 210,000 Btu Cable for Wiring of Premises ICEA T-30-520: ICEA Standard for Vertical ICEA S-81-570: Standard for Direct Burial Tray Flame Tests at 70,000 Btu 600 Volt Ruggedized Insulation ICEA T-31-610: ICEA Standard for Water ICEA S-82-552: ICEA/NEMA Standards Penetration Resistance Test, Sealed Publication for Instrumentation Cables and Conductor Thermocouple Wire (NEMA WC 55) ICEA T-32-645: ICEA Standards ICEA S-84-608: ICEA/ANSI Standards Publication for Compatibility of Sealed Publication for Telecommunications Cable, Conductor Filer Compounds Filled Polyolefin Insulated, Copper IEEE 45: IEEE Recommended Practice for Conductor Electric Installations on Shipboard ICEA S-85-625: ICEA/ANSI Standards IEEE 48: IEEE Standard Test Procedures Publication for Aircore, Polyolefin Insulated, and Requirements for High-Voltage Alternating Copper Conductor Telecommunications Current Cable Terminations Cable IEEE 100: IEEE Standard Dictionary of ICEA S-86-634: ICEA/ANSI Standards Electrical and Electronics Terms Publication for Buried Distribution and IEEE 141: IEEE Recommended Practice Service Wire, Filled Polyolefin Insulated, for Electric Power Distribution for Copper Conductor Industrial Plants (“IEEE Red Book”) ICEA S-87-640: ICEA/ANSI Standards IEEE 142: IEEE Recommended Practice Publication for Fiber Optic Outside Plant for Grounding of Industrial and Communication Cable Commercial Power Systems (“IEEE NORMAS DE REFERENCIA Green Book”) Cable – Ethylene-Propylene Rubber IEEE 241: IEEE Recommended Practice Insulation for Electric Power Systems in Commercial IEEE 1019: IEEE Recommended Practice Buildings (“IEEE Gray Book”) for Specifying Electric Submersible Pump IEEE 242: IEEE Recommended Practice Cable – Polypropylene Insulation for Protection and Coordination of IEEE 1120: IEEE Guide to the Factors to Industrial and Commercial Power Systems Be Considered in the Planning, Design, (“IEEE Buff Book”) and Installation of Submarine Power and IEEE 400: IEEE Guide for Making High- Communications Cables Direct-Voltage Tests on Power Cable IEEE 1202: IEEE Standard for Flame Systems in the Field Testing of Cables for Use in Cable Tray in IEEE 404: IEEE Standard for Cable Joints Industrial and Commercial Occupancies for Use with Extruded Dielectric Cable IEEE/ICEA S-135: Power Cable Rated 5,000V Through 46,000V, and Cable Ampacities Joints for Use with Laminated Dielectric NFPA 70: National Electrical Code Cable Rated 2,500V Through 500,000V NFPA 70HB: National Electrical Code IEEE 446: IEEE Recommended Practice Handbook for Emergency and Standby Power NFPA 262: Test for Fire and Smoke Systems for Industrial and Commercial Characteristics of Wires and Cables Applications (“IEEE Orange Book”) ONT M-302-84: Cable, Secondary, for IEEE 493: IEEE Recommended Practice Direct Burial for the Design ONT M-355-82: Cable, Primary Submarine of Reliable Industrial and Commercial ONT M-538-84: Cable, For Use in Power Systems (“IEEE Gold Book”) Generating Stations (5 kV and Above) IEEE 524: IEEE Guide to the Installation of ONT M-570-84: Cable, For Use in Overhead Transmission Line Conductors Generating Stations (600V) IEEE 525: IEEE Guide for the Design and ONT M-695-88: Cable, Primary and Installation of Cable Systems in Subtransmission Submarine, Concentric Substations Neutral IEEE 575: IEEE Guide for the Application SAE 1560: Low Tension, Thin Wall Primary of Sheath-Bonding Methods for Single- Cable Conductor Cables and the Calculation of SAE J1127: Battery Cable Induced Voltages and Currents in Cable SAE J1128: Low Tension Primary Cable Sheaths UL 4: Standard for Armored Cable IEEE 576: IEEE Recommended Practice UL 13: Standard for Power-Limited Circuit for Installation, Termination, and Testing of Cables Insulated Power Cable as Used in the UL 44: Standard for Rubber-Insulated Wires Petroleum and Chemical Industry and Cables IEEE 602: IEEE Recommended Practice UL 62: Standard for Flexible Cord and for Electric Systems in Health Care Fixture Wire Facilities (“IEEE White Book”) UL 83: Standard for Thermoplastic- IEEE 635: IEEE Guide for Selection and Insulated Wires and Cables Design of Aluminum Sheaths for Power UL 183: Standard for Manufactured Wiring Cables Systems IEEE 738: IEEE Standard for Calculation UL 444: Standard for Communications of Bare Overhead Conductor Temperature Cables and Ampacity Under Steady-State UL 486A: Standard for Wire Connectors Conditions and Soldering Lugs for Use With Copper IEEE 789: IEEE Standard Performance Conductors Requirements for Communications and UL 486B: Standard for Wire Connectors Control Cables for Application in High and Soldering Lugs for Use With Aluminum Voltage Environments Conductors IEEE 816: IEEE Guide for Determining the UL 486C: Standard for Splicing Wire Smoke Generation of Solid Materials Used Connectors for Insulations and Coverings of Electric UL 486D: Standard for Insulated Wire Wire and Cable Connectors for Use With Underground IEEE 1017: IEEE Recommended Practice Conductors for Field Testing Electric Submersible UL 486E: Standard for Equipment Wiring Pump Cable Terminals for Use With Aluminum and/or IEEE 1018: IEEE Recommended Practice Copper Conductors for Specifying Electric Submersible Pump UL 493: Standard for Thermoplastic- NORMAS DE REFERENCIA Insulated Underground Feeder and Branch- Circuit Cables UL 498: Standard for Attachment Plugs and Receptacles UL 514B: Standard for Fittings for Conduit and Outlet Boxes UL 719: Standard for Nonmetallic-Sheathed Cables UL 758: Standard for Appliance Wiring Material - Component UL 814: Standard for Gas-Tube-Sign and Ignition Cable UL 817: Standard for Cord Sets and Power- Supply Cords UL 854: Standard for Service-Entrance Cables UL 910: Standard for Test for Flame- Propagation and Smoke-Density Values for Electrical and Optical-Fiber Cables Used in Spaces Transporting Environmental Air UL 1063: Standard for Machine-Tool Wires and Cables UL 1072: Standard for Medium-Voltage Power Cables UL 1277: Standard for Electrical Power and Control Tray Cables With Optional Optical Fiber Members UL 1309: Standard for Marine Shipboard Cable UL 1424: Standard for Cables for Power- Limited Fire-Protective-Signaling Circuits UL 1426: Standard for Cables for Boats UL 1446: Standard for Systems of Insulating Materials—General UL 1569: Standard for Metal-Clad Cables UL 1581: Reference Standard for Electrical Wires, Cables and Flexible Cords UL 1666: Standard Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts UL 1685: Standard for Vertical-Tray Fire- Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables UL 1690: Standard for Data Processing (DP) Cables UL 1712: Standard Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System UL 1807: Standard for Fire Resistant Cable Coating Materials UL 2023: Standard Test Method for Flame and Smoke Characteristics of Nonmetallic Wiring Systems (Raceway and Conductors) for Environmental Air- Handling Spaces UL 2029: Standard for Gas/Vapor-Blocked Cable Classified for Use in Class 1 Hazardous (Classified) Locations
Hosting Offer For Marie Sklodowska-Curie Postdoctoral Fellowships (PF) 2022 at University of Antwerp/Research Group A-Sense Lab/Centre of Excellence Nanolab