Académique Documents
Professionnel Documents
Culture Documents
54,5 t
Crawler material handling machine
20 m
f
IV
R
T IE
Further developed. The E-Series.
Green Efficiency
Save fuel - lower operating costs
Calm work - easy on the operator and on the environment
Maximum safety
Safe entry and exit - non-slip step surfaces
Modern cameras - the entire work area is in view
Uniformly quiet working machine, thanks Constant, reliable performance due to large-
to decoupled engine suspension and acoustic dimensioned and highly-resistant fans and coolers
insulationmats in the doors Water coolers and oil coolers with optimal efficiency
Sound pressure level reduced by as much as 4.5 dB; thanks to control via axial piston pump and motor
sound power level in accordance with 2000/14/EC thermostatic regulation on-demand
as much as 2 dB lower than required Charge air cooler with mechanical drive
Maximum safety
Non-slip work surfaces
Perimeter railing (optional)
2 cameras to the right and to
the rear
Step grid with railing sliding
door of the cab
Standard equipment: Automatic, fast and strong fan Strong pumps with power reserves
reversal for blowing out the coolers and continuous Highest levels of efficiency thanks to large-
cooling capacity dimensioned hydraulic valves and lines
Side-by-side coolers, easily accessible and clean Extremely long change intervals of 4,000 op.hrs
cooler technology through initial filling with HVLPD oil with extended oil
Fuel savings through optimized fan operation service life when used with SENNEBOGEN HydroClean*
Maintenance-optimized
Fast and easy fault diagnostics
through the effectively designed
and clearly labeled electrical
distributor
Easy accessibility to all service
points of the machine
Automatic central lubrication
for equipment and slewingring
raceway
Optimal protection of Easy access, central All parts are labeled with a
hydraulic components measuring points unique part number
thanks to 3 μm micro- Fast inspection of the entire Easy and reliable spare parts
filter hydraulic system ordering
Cleaner hydraulic oil,
extended oil service life
* optional
7
Modular structure - versatile solutions
Multi-shell grab
Magnet plate
Electro-hydraulic drive
E300/260 with Maxcab
Magnetic generator
Transformer
Variants - undercarriage
max.
2,5 m 4,5 m
* Additional information on our mobile undercarriage is in the separate 835 M E-Series brochure
for fast work cycles and high-
h-
ling
performance material handling
High stabilit
stability
due to the bro
broad
outrigger area
* Option 9
Technical data - equipment
SENNEBOGEN UNDERCARRIAGE
Cab type Hydraulically elevating cab E270 Design Wide-gauge crawler undercarriage in stable,
Cab equipment Sliding door, excellent ergonomics, climate torsionally rigid box construction
automation, seat heater, air-suspension comfort Drive Hydraulic travel drive, integrated in the
seat, fresh air filter / circulating air filter, joystick traveling gear frame for each traveling
steering, 12 V / 24 V connections, SENCON gear side through an axial piston motor via
compact planetary gear.
Options Cab E300/260 can be elevated 300 cm, and
Parking brake Spring-loaded, hydraulically ventilated disk
moved forward 260 mm hydraulically
brakes. Hydraulic brake valves protect the
Rigid cab elevation 1.00 m
drive engines when moving downhill.
Auxiliary heating system with timer
Cab active-charcoal filter inside air/outside Traveling gear Telescopic crawler undercarriage type
air, ideal for waste recycling applications T41/380 with mechanical track adjustment
Steering wheel steering with adjustable from 2.3 – 3.8 m and maintenance-free B6
steering column crawler track (55 links, length 5350 mm) with
Sliding window in the operator door 700 mm triple-grouser track shoes, canted
Armored glass windshield, additional safety Speed 0 - 1.6 km/h stage I
Armored glass roof window, additional 0 - 3 km/h stage II
safety
Options Telescopic crawler undercarriage type
Safety side window
T41/380 with hydraulic track adjustment
Floor window for a better view
of 2.3 - 3.8 m
Sunblind for roof window
Maintenance-free B6 crawler track
Protective roof grating
(55 links, length 5350 mm) with 700 mm
FOPS protective roof grating
flat track shoes, rounded
Front protective grating
Maintenance-free B6 crawler track
Radio and CD player with speakers
(55 links, length 5350 mm) with 800 mm
Enlarged industrial cab with undivided
triple-growser track shoes, canted
armored glass windshield
ELECTRIC DRIVE
ATTACHMENTS
Option Power: 160 kW / 400 volt / 50 Hz
Design Decades of experience, state-of-the-art Total connected load 270 kVA, customer-
computer simulation, highest level stability, provided fusing 355 A at 400 V - motor
longest service life, large-dimensioned start-up via star-delta circuit
bearing points, sealed special bearing bushes,
precision-crafted, quick-release couplings on Power: 200 kW / 400 volt / 50 Hz
the grapple connections - open/close/rotate Total connected load 340 kVA, customer-
provided fusing 425 A at 500 V - motor
Cylinders Hydraulic cylinders with high-quality sealing start-up via star-delta circuit
and guide elements, end position damping,
sealed bearing points Advantages: Lowest operating costs,
low-noise and virtually vibration-free
Options Ball valves on the hydraulic lines grapple work, long service life of the hydraulic
open, close, and rotate grapple components
Kinematic position II for greater working
depth OPERATING WEIGHT
Maritime coating
Maritime coating of all cylinders, nickel- Mass approximately 54,500 kg
plated and chrome-plated Basic machine 835 R with
Float position for equipment via hoist attachment K18 and
cylinder 600 l multi-shell grab
Lift limitation / stick limitation adjustable
for the stop settings, for example in the hall Note The operating weight varies
depending on the design.
11
Technical data, equipment
20
19
K16 18
Kinemat.
mat. Posi
Position I 17
16
15
14
13
6 8.7 55.0
.
12
110.0 8.8 11
10
1 8.9 7.9 7.
9
10 5
10.5 91
9.1 80
8.0 7
7. 8
7
11.0 9.4 8.1 7.
6
11.6 9.7 8.3 7. 5
4
9.9
3
2
1
4.6 10.8 12.0 9.8 8.1 6.8
.
0
Machine shown
mirror image 4.9 . 11.2
9.0 9.2 7.6 6.. -1
-2
8 8.2 6.8 5.6
.
-3
-4
-5
-6
-7
-8
I.18092008144350
0 -9
-10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 m
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
5.0
50
5. 2
1
4 7.7
7.
.7 11.4 9.2 7.7 6.5 5.6
5.6
5.
0
Machine shown
mirror image 7 6.5 10.6
6 8.8 7.3 6.2 5.2 -1
-2
9.5 8.0 6. 7 4.7
-3
-4
-5
-6
-7
-8
I.18092008113542
0 -9
-10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 m
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Undercarriage T41/380 - R44D/380 Compact boom 10,8 m Banana Cab maXcab E300/260, hydraulic eleva-
Loading stick 7,9 m ting and forward moving (Option)
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
4.0
B19 22
Kinemat.
t. Positi
Position I 21
3.9 20
19
4.6 3.6
18
17
16
5.6 5.1 4. 3.9
9
15
5.8 5.2 4. 3.9 14
13
6.8
6..8 6.0 3.9 3.5
12
2 6.2 5.4 4. 3.9 3.5 11
10
11.4 5 6.4 5.6 4. 3.9 3.5
9
8 6.6 3.9 3.5 8
7
5.0 4.4 3.9 3.4
6
8.3 10 2 6.8 3.8 3.3 5
4
6.5 1 1 6.7 3.7 3.2
3
6.0 8 6.5 3.5 2.9 2
1
5.9 3 6.1 5.2 4.
0
Machine shown
mirror image 6.0 6 5.6 4.7 4.0 3.3 -1
-2
6 4.8 3.4
-3
-4
-5
-6
-7
m
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load
hook, et cetera are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
cylinders and an overload warning device. The specified load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specified load
ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
HO G
SGM l kg kg t
400.40-4 400 1570 1720
600.40-4 600 1790
800.40-4 800 1930 8,0
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Weight1 max.
Design / size Grab content
Shell shape 2 load capacity
HO G
SGM l kg kg t
400.40 400 1920
600.40 600 2035
800.40 800 2140 8,0
1000.40 1000 2040 2290
1250.40 1250 2180 2415
Break-away Load-bearing
Type series / model Power Deadweight
force in kg
WOKO kW kg kN Bramme
((safety factor 2)
S-RSL 15 12,2 1950 360 1800
S-RSL 17 17,0 2500 460 2300
S-RLB 13,5 10,0 1700 300 15000
S-RLB 15 11,7 2400 380 19000
S-RLB 17 17,8 3300 640 32000
Recommended magnetic generator: 15 kW / 20 kW
*) On request ) Weight information without grab
1 2
) Half-open shells: Shell sheet steel 400 mm wide,
suspension, stick bolts, hose system from content 1250 l shell sheet steel 500 mm wide
Detailed information concerning the grabs, as well as log grabs, quick-release systems, and
other attachments is provided in the "Attachments" brochure
Dimension information in [mm] 19
Dimensions
3675 3295
675 3000
5810
1050
3800 5350
4500
Transport width 3000 mm
835 R with hydraulic telescopic undercarriage T41/380 and hydraulic elevating cab E270
3675
6355
3800 4400
4500 2600 2590
5350
835 R with wide gauge undercarriage R44D/380 and hydraulic elevating and
forward moving cab E300/260
Dimensions
10700
4,5 m 4,5 m
8450
8040
7350
6100
5610
700
3800 4240
4500 5100
835 R with wide gauge undercarriage R44D/380, 4,5m Pylon and hydraulic
elevating cab type E270
H2
21
Transport dimensions
5350
23