Académique Documents
Professionnel Documents
Culture Documents
Product Overview
Mini-Circuits’ SPHSA-152+ is a surface mount voltage variable phase shifter providing precise 360˚ phase control from 800 to
1500 MHz, supporting many popular cellular and communications application bands. This model achieves low insertion loss of
2.8 dB and good VSWR of 1.2:1. It has a control bandwidth of DC to 50 kHz and a control voltage range of 0 to +15V. Housed
in a shielded, 12-lead package with wrap-around terminations, the unit measures only 0.44 x 0.74 x 0.19”, offering a space-
efficient, low-cost alternative to larger connectorized phase shifters.
Feature Advantages
Enables good transmission of signal power from input to output and minimizes effect on system noise
Low insertion loss, 2.8 dB typ.
figure.
Good VSWR, 1.2:1 typ. SPHSA-152+ provides good input/output matching for 50Ω systems.
In test environments, full 360˚ phase control allows the user to experiment with various incident phases.
Wide Phase Shift, 360° This can be used to test residual phase noise of amplifiers and to determine the influence of phase be-
tween two mismatched components in a system.
Miniature Size:
Saves PCB space and system cost.
0.44 x 0.74 x 0.19”
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
^ proper operation is achieved with pins 8 or 12 or Phase Range 800 - 1500 360 — — Degrees
both connected to BIAS. Insertion Loss 800 -1500 — 2.8 4.5 dB
Control Voltage 800 -1500 — 0-15 — V
Control Bandwidth 800 -1500 — DC-50 — kHz
Outline Drawing VSWR 800 -1500 — 1.2 2.2 :1
PCB Land Pattern DC input resistance at Control port: 2000 ohms typ.
J K L M N P wt
.140 .070 .480 .063 .061 -- grams SPHSA-152+ SPHSA-152+
3.56 1.78 12.19 1.60 1.55 -- 2.5 PHASE SHIFT VSWR
450 2.0
400 800 MHz
PHASE SHIFT (DEG.)
1150 MHz
Demo Board MCL P/N: TB-524+ 350 1.8
1500 MHz
Suggested PCB Layout (PL-408) 300
1.6
VSWR
250
200
1.4
150 800 MHz
100 1150 MHz 1.2
50 1500 MHz
0 1.0
0 3 6 9 12 15 0 3 6 9 12 15
CONTROL VOLTAGE (V) CONTROL VOLTAGE (V)
SPHSA-152+
INSERTION LOSS
5.0 electrical schematic
800 MHz
4.5
INSERTION LOSS (dB)
1150 MHz
4.0 1500 MHz
3.5
3.0 RF IN RF OUT
2.5
2.0
1.5
1.0
CONTROL VOLTAGE
0 3 6 9 12 15
CONTROL VOLTAGE (V)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. REV. A
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled M151107
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp SPHSA-152+
Mini-Circuits ED-16227
®
WZ/CP/AM
150817
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com