Académique Documents
Professionnel Documents
Culture Documents
CastoDur Diamond ®
Plate
4666
CDP 4666 premium wear plate is manufactured in 4’ x 9’ Low and Medium carbon XHD® 66 electrode
sheets that can be cut, formed, or rolled to desired shapes. steels; high strength, low
CDP 4666 is easily bolted or welded into place. For custom alloy steels.
fabrication, please contact Eutectic Technical Services.
Alloy steels; manganese XHD® 6868 680CGS
steels; hardened steels. (3/32” dia. (2.4mm))
TECHNICAL DATA:
Attachment weld may be overlayed with XHD Abratec N6715 to protect
against abrasive wear.
Overall Approx. Wt.
Thickness Base Overlay per sq/ft
3/8”(10mm) 6mm 4mm 16 lb.
1/2”(13mm) 8mm 5mm 21 lb. GMAW (Wire)
3/4”(19mm) 12mm 7mm 31 lb.
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without
representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user
in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof.
4666 1-15 © 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.