Académique Documents
Professionnel Documents
Culture Documents
© Siemens AG 2013
Communication
8/2 HART protocol
8/3 WirelessHART
8/6 PROFIBUS
8/7 FOUNDATION Fieldbus
WirelessHART Communication
8/8 Communication blocks
8/9 SITRANS MDS -
Maintenance Diagnostic Station
Software
8/11 SIMATIC PDM -
Process Device Manager
8/22 SITRANS DTM
8/23 SITRANS Library
Siemens FI 01 · 2014
© Siemens AG 2013
■ Overview ■ Integration
HART is a widely used communication standard for field Siemens field devices for process automation which are listed in
devices. Specification of HART devices takes place through the this catalog and can be controlled using HART:
HCF (HART Communication Foundation).
The HART standard expands the analog 4 to 20 mA signal for Measuring instruments for pressure
modulated, industry-proven, digital signal transmission. SITRANS P DS III
SITRANS P P300
■ Benefits SITRANS P P500
• Service-proven analog measured value transmission
Measuring instruments for temperature
• Simultaneous digital communication with bidirectional data
SITRANS TF
transmission
• Possibility of transmitting several measured variables from SITRANS TH300
one field device (e.g. diagnosis, maintenance and process SITRANS TR300
data) SITRANS TW
• Connection to higher-level systems such as PROFIBUS DP
Flowmeters
• Easy installation and startup
SITRANS F M MAG 5000
Use in conjunction with SIMATIC PDM SITRANS F M MAG 6000 19" / IP67
• Cross-vendor operation of all HART devices by means of stan-
SITRANS F M MAG 6000 I / I Ex
dardized parameter records
SITRANS F M Transmag 2
• HART field devices that are described by HART DD are inte-
grated in SIMATIC PDM through the HCF catalog. HART DD SITRANS F C MASS 6000 19" / IP67 / Ex d
(Device Description) is standardized in SIMATIC PDM, multi- SITRANS F C FCT030
vendor and very widely used. Other HART field devices are in-
tegrated in SIMATIC PDM through EDD (Electronic Device De- SITRANS FUS060
scription) SITRANS FX300
• Easy operation and startup of field devices, also in Measuring instruments for level
hard-to-reach locations
Pointek CLS500
• Expanded diagnosis, evaluation and logging functions
SITRANS Probe LR
■ Overview ■ Design
WirelessHART is the first international industry standard for wire- This section introduces the application types described in the
less communication at field level in the area of process automa- previous section in greater detail.
tion. Hence this is the first time users are provided with a stan-
dard for wireless communication at field level which ensures the The figure below shows a typical situation for the first application
interoperability of instruments and components from different type.
manufacturers.
SITRANS
■ Benefits MDS
OS
PROFIBUS
mates forwarded by the HART Communication Foundation
(HCF), approximately 85 % of the over 30 million HART devices 4 –20 mA
in operation are used in an environment where only the 4 to
20 mA interface rather than the HART interface of the device is IE/WSN-
used on a system level. Generally, data on the device can only PA LINK
be read on site. This is of particular disadvantage with devices
that contain self-diagnostic functions - that’s what we call
"stranded diagnosis". The adapter is connected to the 4 to 20 mA loop, which is used
to transmit the measured value to the control system, or transmit
In these cases, a WirelessHART adapter can offer assistance. the setpoint to an actuator. The existing control system is not af-
Connected to the 4 to 20 mA loop, it allows central access to the
device based on wireless communication. It does not affect pro-
fected by the WirelessHART adapter.
The data, in particular diagnostic data from the devices is trans-
8
cess control systems which continue to receive the measured
value using the 4 to 20 mA loop. mitted to the IE/WSN-PA LINK via the connected adapter and the
WirelessHART network. The link provides this data to a diagnos-
Central access is enabled through a diagnostic station with tic and maintenance station with installed SITRANS MDS soft-
SIMATIC PDM and SITRANS MDS software. ware and SIMATIC PDM via an industrial Ethernet. Industrial
wireless LAN can be used to save on the installation costs re-
Main advantages: quired for Ethernet wiring. An extensive product portfolio of
• Increases the availability of the plant Scalance W components is available for this purpose.
• Increases plant transparency The functionality of related to the SITRANS MDS is described in
• Reduces costs due to employing a predictive rather than pre- great detail on page 8/9 of this catalog.
ventative maintenance concept
• Reduces travel time in larger systems based on central ac-
cess to field instrumentation
In the second application the 4 to 20 mA loop is omitted, all data in-
cluding measured process values and diagnostic information are
transmitted wirelessly to a process control system, for example.
Main advantages are:
• No planning and installation of data cables, resulting in signif-
icant cost reductions
• Higher system transparency due to additional and hitherto un-
feasible installation of measuring points
• Process optimization due to flexible, temporary and cost-ef-
fective measuring points via wireless communication
• Utilization of proven devices by using adapters
• The WirelessHART meshed network also makes it possible to
bridge longer distances
Software Overview
Applications 1 and 2 will require the following software products
Component Products Article No.
1)
Maintenance Diagnostic Station SITRANS MDS
SIMATIC PDM and Options
SIMATIC PDM Basic (4 Tags) 6ES7658-3AX16-0YA5
Extend Basic to 128 Tags 6ES7658-3XA16-2YB5
Application type 1
■ More information
More detailed information on the required WirelessHART
software and hardware components can be found in the
FI 01 catalog or at www.siemens.com/wirelesshart.
■ Overview ■ Function
Today, distributed automation solutions based on open field PROFIBUS PA expands PROFIBUS DP with near-process com-
buses are state-of-the-art in large areas of the manufacturing ponents for the direct connection of actuators and sensors.
industry and process engineering. It is only with field buses that For PROFIBUS PA the RS 485 transmission technique was
the functional benefits of digital communication can be put to full replaced by a different technique optimized for intrinsically safe
use, e.g. better resolution of measured values, diagnosis options application. Both techniques are internationally standardized in
and remote parameterization. IEC 61158.
PROFIBUS is today’s most successful open field bus with a large PROFIBUS PA uses the same communication protocol as
installed base for a wide range of application. Standardization to PROFIBUS DP; the communication services and telegrams are
IEC 61158 / EN 50170 provides you with future protection for identical.
your investment. For PROFIBUS PA the data and energy supply for the field
devices can be directed through a 2-wire line.
■ Benefits
• A uniform modular system from the sensor into the control ■ Integration
level enables new plant concepts Siemens field devices for process automation which are listed in
• Problem-free exchangeability of field devices, including from this catalog and can be controlled using PROFIBUS:
different manufacturers, that comply with the standard profile
PROFIBUS PA
• Networking of transmitters, valves, actuators etc.
Measuring instruments for pressure
• Implementation of intrinsically safe applications through use of
the field bus in hazardous areas SITRANS P DS III PA
• Easy installation of 2-wire lines for joint energy supply and SITRANS P300
data transmission Measuring instruments for temperature
• Reduced cabling costs through savings of material and instal- SITRANS TH400
lation time
Flowmeters
• Reduced configuration costs through central, simple
engineering of the field devices (PROFIBUS PA and HART with SITRANS F M MAG 6000 19" / IP67
SIMATIC PDM, also cross-vendor) SITRANS F M MAG 6000 I / I Ex
• Fast and error-free installation SITRANS F M Transmag 2
• Lower service costs thanks to simpler wiring and plant struc- SITRANS F C MASS 6000 19" / IP67 / Ex d
ture plus extensive diagnosis options
SITRANS FUS060
• Greatly reduced commissioning costs through simplified loop
check Measuring instruments for level
• Scaling/digitizing of the measured values in the field device Pointek CLS200
already, hence no rescaling necessary in SIMATIC PCS 7 Pointek CLS300
SITRANS Probe LU
■ Application SITRANS LR200
PROFIBUS is suitable for fast communication with distributed SITRANS LR250
8
I/Os (PROFIBUS DP) in production automation as well as for
communication tasks in process automation (PROFIBUS PA). SITRANS LR260
It is the first field bus system that meets the demands of both SITRANS LR400
areas with identical communication services.
SITRANS LR460
The transmission technique of the PROFIBUS PA is tailored to
SITRANS LR560
the needs of the process industry. Interoperability between field
devices from different manufacturers and remote parameteriza- Electropneumatic positioners
tion of the field devices during operation are guaranteed by the SIPART PS2
standardized communication services.
Acoustic sensor for pump monitoring
Using SIMATIC PDM (Process Device Manager), a uniform and
SITRANS DA400
cross-vendor tool for configuring, parameterizing, commission-
ing and diagnosis of intelligent process devices on the
PROFIBUS, it is possible to configure a wide variety of process PROFIBUS DP
devices from different manufacturers using one uniform graphi- Flowmeters
cal user interface.
SITRANS F M MAG 6000 19" / IP67
PROFIBUS PA can just as readily used in standard environments
SITRANS F M MAG 6000 I
as well as hazardous areas. For use in hazardous areas,
PROFIBUS PA and all connected devices have to be designed SITRANS F C MASS 6000 19" / IP67
with type of explosion protection Ex [i]. SIFLOW FC070 (via ET200M)
The uniform protocol of PROFIBUS DP and PROFIBUS PA Measuring instruments for level
enables the two networks to be interlinked, thus combining time-
based performance with intrinsically safe transmission. HydroRanger 200
MultiRanger 100/200
SITRANS LU 01, LU 02, LU 10
Acoustic sensor for pump monitoring
SITRANS DA400
■ Overview ■ Function
Today, distributed automation solutions based on open field FOUNDATION Fieldbus enables the direct connection of actua-
buses are state-of-the-art in large areas of the process engineer- tors and sensors.
ing industry. It is only with field buses that the functional benefits
of digital communication can be put to full use, e.g. better reso- FOUNDATION Fieldbus is based on a transfer optimized for in-
lution of measured values, diagnosis options and remote trinsically safe application. The transfer technology is interna-
parameterization. tionally standardized in IEC 61158.
Like PROFIBUS PA, the FF bus (FOUNDATION Fieldbus) is an For FOUNDATION Fieldbus the data and energy supply for the
open field bus with a large installed base for a wide range of ap- field devices can be directed through a 2-wire cable.
plication. Standardization to IEC 61158 / EN 50170 provides you FOUNDATION Fieldbus enables device-to-device communica-
with future protection for your investment. tion ("control in the field").
■ Benefits ■ Integration
• A uniform modular system from the sensor to the connection Siemens field devices for process automation which are listed in
to the control level enables new plant concepts this catalog and can be controlled using Foundation Fieldbus:
• Networking of transmitters, valves, actuators etc.
Measuring instruments for pressure
• Implementation of intrinsically safe applications through use of
SITRANS P300 FF
the field bus in hazardous areas
• Easy installation of 2-wire cables for joint energy supply and SITRANS P DS III FF
data transfer Measuring instruments for temperature
• Reduced cabling costs through savings of material and instal- SITRANS TH400 FF
lation time.
Electropneumatic positioners
• Reduced configuration costs through central, simple engi-
SIPART PS2 FF
neering of the field devices, also cross-vendor
• Fast and error-free installation Flowmeters
• Lower service costs thanks to simpler wiring and plant struc- SITRANS F M MAG 6000
ture plus extensive diagnosis options SITRANS F M MAG 6000 I / I Ex
• Greatly reduced commissioning costs through simplified loop SITRANS F C MASS 6000
check
Level meters
• Scaling/digitizing of the measured values in the field device al-
ready, hence no rescaling necessary in SIMATIC PCS 7 SITRANS LR250
SITRANS LR560
■ Application
The transfer technology of the FOUNDATION Fieldbus is tailored
to the needs of the process industry. Interoperability between
field devices from different manufacturers and remote parame-
terization of the field devices during operation are guaranteed
by the standardized communication services.
FOUNDATION Fieldbus can just as readily be used in standard 8
environments as in hazardous areas. For use in hazardous ar-
eas, FOUNDATION Fieldbus and all connected devices have to
be designed with type of explosion protection Ex [i].
■ Overview ■ Function
The function blocks cyclically communicate with the
IE/WSN-PA LINK via Modbus TCP/IP. Process values of
HMI
WirelessHART devices as well as their status are read and made
available at the function block outputs. Furthermore, selected
Industrial Ethernet
status information of the IE/WSN-PA LINK is also made available
at another building block. This information includes connection
SITRANS TF280
status, condition of the wireless network and other diagnostics.
Precondition of the usage of these communication blocks is a
SIMATIC S7-300 TCP/IP connection, engineered in NetPro in the Engineering Sta-
SIMATIC S7-400
tion of Simatic PCS 7. Currently this requires a CP343 or a
IE/WSN-PA LINK CP443-1.
Simple configuration thanks to: ■ Selection and Ordering data Article No.
• Prefabricated function blocks for IE/WSN-PA LINK and Wire-
lessHART devices S7/PCS 7 function blocks for 9AE4110-3AA00
communicating with
• SIMATIC PCS 7 OS or SIMATIC WinCC symbols and face WirelessHART devices using
plates are included the IE/WSN-PA LINK
8 • Configuring help for IE/WSN-PA LINK in line with function
blocks
S7-300 or S7-400,
including face plate
• Output of quality codes for respective process values
• Analysis of IE/WSN-PA LINK diagnostic information
■ Application
WirelessHART communication blocks are used where SIMATIC
automation systems communicate with WirelessHART devices
via the IE/WSN-PA LINK gateway.
■ Overview ■ Design
SITRANS MDS uses SIMATIC PDM project data to read and
display diagnostic data from accessible devices.
SITRANS
OS
MDS
Industrial Ethernet
Controller without
HART support
SITRANS
AW200
4 –20 mA
IWLAN
IEEE802.11
Maintenance Diagnostic Station
SITRANS MDS for flexible and automated diagnostic process- 4 –20 mA
ing: Wireless
• Central display of diagnostic information from HART devices, HART
which was only readable on site until now.
• Adjustable updating period for each device Industrial
Ethernet
• Clear visualization of diagnostic status of all devices
Remote I/O station
• Simply transfer of SIMATIC PDM configuring data w/o HART support
• Windows-based application
PROFIBUS
■ Benefits 4 –20 mA
8
SIMATIC PCS 7 or NAMUR NE 107 (switchable)
• Ease of use through use of SIMATIC PDM project data
■ Configuration
• The update cycle for the diagnostic status can be uniformly Configuration required for SITRANS MDS is adopted from
set as the default value for all devices ... SIMATIC PDM. Only the project name must be entered.
• ... as well as for each device individually Very few other entries are required, such as the definition of
update periods.
■ Application
SITRANS MDS increases the transparency of a plant by centrally
collecting diagnostic information, directly from the accessible
field devices. In principle, all devices that are integrated in
SIMATIC PDM can be included in the collecting process.
SITRANS MDS can be used where the installed automation sys-
tem does not support an integrated acyclic communication of
parameters and diagnostic information with the devices. In the
case of HART devices, this applies to 85% of all installed
devices.
The modern SIMATIC PCS 7 process control system allows for
this type of continuous communication from the engineering sys-
tem up to the devices. It also features a decidedly higher perfor-
mance asset management system. The use of SIMATIC MDS
therefore does not make sense in a SIMATIC PCS 7 environment
and is hence not approved for that purpose.
■ Technical specifications
SITRANS MDS Maintenance Diagnostic Station
Operating system Microsoft Windows XP
professional SP2/SP3
Additionally required software
SIMATIC PDM as of V 6.05 and
options
• SIMATIC PDM Basic (4 Tags) 6ES7 658-3AX16-0YA5
• SIMATIC PDM service (128 Tags) 6ES7 658-3JX16-0YA5
• SIMATIC PDM Option HART Mux 6ES7 658-3EX16-2YB5
Additional options to increase
number of measuring points
PC hardware 600 MHz
256 MB *)
XGA 1024 x 768
16 Bit color depth
*) main memory of at least
512 MB is recommended
Up-to-date information can be
found in the description for
SIMATIC PDM
■ Overview
SIMATIC PCS 7 engineering station Device on
with SIMATIC PDM the workbench
Plant bus
SITRANS P
S7-400 S7-400
Stand-alone
computer
with SIMATIC PDM
G_PCS7_XX_00200
Possible connection point
of a PG/PC with
SIPART SITRANS SITRANS SITRANS SIPART SIMATIC PDM
PS2 TH400 LR 250 P DS III SITRANS F M PS2 (stand-alone operation)
■ Application
Components Product packages
SIMATIC PDM stand-alone SIMATIC PDM system-integrated
Minimum Basic Application-specific
configuration configuration configurations
SIMATIC PDM SIMATIC PDM SIMATIC PDM SIMATIC PDM SIMATIC PDM
Single Point Basic Service S7 PCS 7
V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 FF V8.1
SIMATIC PDM TAGs1) in product package 1 1 4 4 128 100 128 100 128 100 100
SIMATIC PDM expansion options
TAG - 128 TAGs cannot be expanded o – – – – – – – –
options - 512 TAGs
- 1 024 TAGs
- 2 048 TAGs
PowerPacks - 128 to 512 TAGs o – o – o – o – –
- 512 to 1 024 TAGs
- 1 024 to 2 048 TAGs
- 2 048 to unlimited TAGs
Count - 10 TAGs – o – o – o – o o
Relevant - 100 TAGs
Licenses
(accumula- - 1 000 TAGs
tive)
SIMATIC PDM Basic n n n n n n n n n
SIMATIC PDM Extended – o – o – n – n n
SIMATIC PDM integration in o o o o n n n n n
STEP 7/PCS 7
SIMATIC PDM routing o o o o o o n n n
SIMATIC PDM Communication – o – o – o – o n
FOUNDATION Fieldbus
SIMATIC PDM Communication via o – o – o – o – –
standard HART multiplexer
■ Design
Function and performance SIMATIC PDM
characteristics
Single Point Basic Service S7 PCS 7
V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 V6.1 V8.1 FF V8.1
TAGs contained 1 1 4 4 128 100 128 100 128 100 100
Project: Create online n – n n n n n n n n n
Project: Create offline – n n n n n n n n n n
Project: Usable TAG extensions – – n n n n n n n n n
Project: Network view – n n n n n n – n – –
Project: Plant view – n n n n n n n n n n
Project: Export/import devices – – n n n n n – n – –
Project: HW Config – – o o o o n n n n n
Project: Utilization of – – n n n n n n n n n
SIMATIC PDM options
Project: Integration in – – o o o o n n n n n
STEP 7/PCS 7
Communication: HART modem n n n n n n n – n – –
Communication: HART interface n n n n n n n – n – –
Communication: PROFIBUS n n n n n n n n n n n
Communication: FF H1 – – – o – o – o – o n
Communication: Modbus n – n – n – n – n – –
Communication: SIPART DR n – n – n – n – n – –
Communication: SIREC n – n – n – n – n – –
Communication: Ethernet – – n – n – n – n – –
Communication: PROFINET – – – – – – – n – n n
Devices: Export/import n – n o n n n n n n n
parameters
Devices: Comparison of values n – n o n n n n n n n
(online/offline)
Devices: Comparison of values – – n o n n n n n n n
of two devices
Devices: Saving parameters – n n n n n n n n n n
Devices: Logbook (Audit Trail) – – o o n n n n n n n
8
Devices: Calibration report – – o o n n n n n n n
LifeList: Export Scan – – n o n n n – n – –
LifeList: Device diagnostics – – o o n n n n n n n
LifeList: Define scan area – n o o n o n n n n n
LifeList: Save scan – – o o n – n – n – –
LifeList: Scan from HW Config – – o o o o n n n n n
Communication: S7 routing – – o o o o o o n n n
Communication: – – o – o – – – – – –
HART multiplexer
Function: HART SHC mode – n n n n n n n n n n
(increased communication
speed)
Function: "HART-Long TAG" – n – n – n – n – n n
This product package based on SIMATIC PDM Basic V8.1 for SIMATIC PDM integration option in STEP 7/PCS 7 V8.1
projects with up to 100 TAGs is intended for mobile use in This option is used for the integration of SIMATIC PDM V8.1 in
service. a SIMATIC S7 or SIMATIC PCS 7 configuration environment.
Similar to SIMATIC PDM Basic V8.1, SIMATIC PDM Service V8.1 SIMATIC PDM V8.1 can then be started directly from the
can be upgraded with all the functional options for SIMATIC PDM hardware configurator (HW Config) in STEP 7/SIMATIC PCS 7.
V8.1 as well as with cumulative 10, 100 or 1 000 SIMATIC PDM SIMATIC PDM Routing V8.1 option
TAGs.
If SIMATIC PDM V8.1 is used on a central engineering station,
SIMATIC PDM system-integrated the SIMATIC PDM Routing V8.1 option enables handling of every
device in the field that can be configured per EDD throughout
8
SIMATIC PDM S7 V8.1 the plant and across different bus systems and remote I/Os.
Similar to SIMATIC PDM S7 V6.1, SIMATIC PDM S7 V8.1 is also SIMATIC PDM Communication FOUNDATION Fieldbus V8.1
designed for use in a SIMATIC S7 configuration environment, option
but differs functionally (for details, see the table "Overview of
functions and performance for SIMATIC PDM") and due to the With this option, SIMATIC PDM can communicate in a
number of TAGs it features (100 TAGs included). SIMATIC SIMATIC S7/PCS 7 engineering environment with field devices
PDM S7 V8.1 is therefore not a functionally compatible on the FOUNDATION Fieldbus H1 via the FF link.
successor to SIMATIC PDM S7 V6.1.
SIMATIC PDM TAGs for SIMATIC PDM V8.1
SIMATIC PDM S7 V8.1 requires the installation of STEP 7
V5.5+SP2 (for using PROFINET communication STEP 7 Depending on the project size, the TAGs supplied with a product
V5.5+SP3). When selecting a product, note that SIMATIC PDM can be cumulatively expanded with 10, 100 or 1 000 SIMATIC
S7 V8.1 is not backwards compatible, and multiple SIMATIC PDM TAGs. A TAG corresponds to a SIMATIC PDM object, which
PDM versions cannot be operated simultaneously. represents individual field devices or components within a
project, e.g. measuring instruments, positioners, switching
SIMATIC PDM S7 V8.1 can be expanded with the functional devices or remote I/Os. TAGs are also relevant for diagnostics
options "SIMATIC PDM Routing V8.1" and "SIMATIC PDM with the lifelist of SIMATIC PDM. In this case, TAGs are consid-
Communication FOUNDATION Fieldbus V8.1" and with ered to be all recognized devices with diagnostics capability,
cumulative sets of 10, 100 or 1 000 SIMATIC PDM TAGs. whose detailed diagnostics is effected through the device
description (EDD).
SIMATIC PDM PCS 7 V8.1 and SIMATIC PDM PCS 7-FF V8.1
SIMATIC PDM PCS 7 V8.1 and SIMATIC PDM PCS 7-FF V8.1
focus on functions different from those of SIMATIC PDM PCS 7
V6.1 (for details, see the table "Overview of functions and
performance for SIMATIC PDM"). They additionally support
projects with "PROFINET" and "FOUNDATION Fieldbus"
communication. FOUNDATION Fieldbus functionality is already
integrated in SIMATIC PDM PCS 7-FF V8.1.
■ Function ■ Integration
Device integration
SIMATIC PDM supports all devices described by EDD
(Electronic Device Description). EDD is standardized to
EN 50391 and IEC 61804. Internationally it is the most widely
used standardized technology for device integration. At the
same time, it is the guideline of the established organizations for
• PROFIBUS and PROFINET (PI – PROFIBUS & PROFINET
International)
• HART (HCF: HART Communication Foundation)
• FF (Fieldbus Foundation)
The devices are integrated directly in SIMATIC PDM through
a company-specific EDD or the current HCF or Fieldbus
Foundation libraries. To achieve improved transparency,
they can be managed in project-specific device libraries.
Field devices are described in the EDD in terms of functionality
and construction using the Electronic Device Description
Language (EDDL). Using this description, SIMATIC PDM
automatically creates its user interface with the specific device
data. Existing devices can be updated, and further devices
integrated into SIMATIC PDM, by simply importing the
manufacturer's device-specific EDD.
Fieldbus Foundation provides pre-defined device descriptions
(standard DD) for the basic functions of specific field device
types. The basic functions are implemented using various
standard function and transmission blocks.
Technical support
If you wish to use devices which cannot be found in the
SIMATIC PDM, parameter view and trend window SIMATIC PDM device description library, we would be pleased
to help you integrate them.
Core functions
Support Request
• Adjustment and modification of device parameters
You can request support by service specialists at Technical
• Comparing (e.g. project and device data) Support by using a "Support Request" on the Internet:
• Plausibility testing of data input
www.siemens.com/automation/support-request
• Device identification and testing
Contacts in the Region
• Device status indication (operating modes, interrupts, states)
• Simulation The Technical Support responsible for your Region can be found
8 • Diagnostics (standard, detailed)
on the Internet at:
www.automation.siemens.com/partner
• Export/import (parameter data, logs, documents)
• Management (e.g. networks and PCs)
• Commissioning functions, e.g. measuring circuit tests of
device data
• Device management (lifecycle management)
• Global and device-specific modification logbook for user
operations (audit trail)
• Device-specific calibration reports
• Graphic presentations of echo envelope curves,
trend displays, valve diagnosis results etc.
• Presentation of incorporated manuals
• Document manager for integration of up to 10 multimedia files
■ Technical specifications
SIMATIC PDM V6.1 SIMATIC PDM V8.1
Hardware • PG/PC/notebook with processor corresponding • PG/PC/notebook with processor corresponding
to operating system requirements to operating system requirements
Operating systems (alternative) • Microsoft Windows XP Professional SP3, 32-bit • Windows XP Professional SP3 (32-bit)
• Microsoft Windows Server 2003 R2 SP2, 32-bit, • Windows Server 2003 SP2 Standard Edition (32-bit)
Standard Edition • Windows Server 2003 R2 SP2 Standard Edition (32-bit)
• Windows 7 Professional/Ultimate/Enterprise SP1
(32-bit/64-bit)
• Windows Server 2008 SP2 Standard Edition (32-bit)
• Windows Server 2008 R2 SP1 Standard Edition (64-bit)
Integration in STEP 7/PCS 7 • STEP 7 V5.3+SP2 • SIMATIC PCS 7 V8.0+SP1 (SIMATIC PCS 7 V8.0 without
• STEP 7 V5.4+SP5 PROFINET communication)
• STEP 7 V5.5 or V5.5+SP1/SP2/SP3 • STEP 7 V5.5+SP3 (STEP 7 V5.5+SP2 without
• SIMATIC PCS 7 V6.1+SP4 PROFINET communication)
• SIMATIC PCS 7 V7.1 or V7.1+SP1/SP2/SP3
• SIMATIC PCS 7 V8.0 or V8.0+SP1
8
on USB stick, certificate of license (SIMATIC PDM and device
• Delivery form online 6ES7658-3HA18-0YH5 library), license key download,
Software image download online certificate of license
(SIMATIC PDM and device Note: E-mail address required!
library), license key download,
online certificate of license
Note: E-mail address required!
8 product packages
SIMATIC PDM Basic V6.1 6ES7658-3AX16-0YA5
SIMATIC PDM S7 V6.1
Product package for use in a
6ES7658-3KX16-0YA5
■ More information
Update/Upgrade When upgrading to SIMATIC PDM V8.1, be aware of the
compatible versions of SIMATIC PCS 7 and STEP 7.
Product packages and optional product components from
the product range of SIMATIC PDM V6.0, V6.1 or V8.0 can be A Software Update Service in the form of a subscription is also
directly upgraded to V8.1 (exception: SIMATIC PDM Single Point offered for SIMATIC PDM.
and SIMATIC PDM Communication via standard HART
multiplexer). For further information, see catalog ST PCS 7.
SITRANS DTM provides an easy way for Field Device Tool (FDT)/
Device Type Manager (DTM) users to parameterize Siemens
Instruments using international standards.
■ Benefits
• Same look and feel for all Siemens field instruments
• Support for Quick start wizards and other dialog boxes
• Quick overview using table and tree views
• Online and offline configuration
• Conformity to IEC profiles for HART and Profibus
■ Application
Electronic Device Description (EDD) is a proven way to describe
the behavior and functionality of field instruments and other
automation components.
For many years, EDD-based tools such as SIMATIC PDM from
■ Overview ■ Design
The product structure, however, is geared toward the operational
environment in the SIMATIC PCS 7 process control system. Con-
sequently, SITRANS Library V8.0 is offered in the form of an en-
gineering component:
• SITRANS Library V1.0
Engineering software with engineering license for one cus-
tomer plant
• SITRANS Library V1.0
Runtime license for one automation system (SIMATIC PCS 7
automation systems of all designs and S7-300 controllers)
The SITRANS Library V1.0 product component enables you to
perform configuration work on a SIMATIC PCS 7 engineering
station.
The SITRANS Library product component allows you to run
blocks from a library on an automation system.
When using function blocks from SITRANS Library V1.0 in
SIMATIC PCS 7 automation systems, note that SIMATIC PCS 7
AS Runtime POs are also booked.
The SITRANS Library V1.0 for SIMATIC PCS 7 V8.0 extends stan- ■ Function
dard functionality of the SIMATIC PCS 7 V8.0 process control SITRANS Library for SIMATIC PCS 7
system concentrated in the SIMATIC PCS 7 Advanced Process
Library (APL) with technological blocks and faceplates for de- Sublibrary for the functional expansion of the SIMATIC PCS 7
vice-specific functions of the SITRANS field devices. Advanced Process Library with:
• Function blocks and faceplates for the SITRANS F M
■ Benefits MAG6000 DP with dosing function for SIMATIC S7-400,
SIMATIC S7-300 and panel interface blocks
This allows you to easily operate all device functions, such as the
• Function blocks and faceplates for the SITRANS LUT 400 for
dosing of the SITRANS FM MAG6000, in a single faceplate. In
SIMATIC S7-400 and SIMATIC S7-300
addition, it also supports operation and monitoring via Touch
Panels as well as the integration in SIMATIC S7 applications. The The function blocks are configured in CFC.
SITRANS Library is based on the modern design of the Ad-
vanced Process Library (APL). Together with the APL, the SI- Control and monitoring from a panel is configured with the panel
TRANS Library enables you to create harmonic solutions with a interface blocks for the SITRANS F M MAG6000 DP. Taking op-
consistent look & feel and optimum use of the functions of the SI- erating rights and hierarchical operating concepts (multi-control
TRANS field devices in many industries. room operation) into consideration, the technological function
can then be operated from both an operator station and a Touch
It helps accelerate the engineering process, reduces the time- Panel.
to-market, and simplifies process control. In addition, operator
functions (such as "Dosing") and process-related diagnostic in-
formation (such as empty pipe detection and flow direction) are
■ Selection and Ordering Data Article No.
8
provided. SITRANS Library
Note: Block library for SIMATIC PCS 7 V8.0 and
SITRANS Library V1.0 can only be used in combination with SIMATIC S7 with function blocks and face
SIMATIC PCS 7 V8.0. plates as well as electronic documentation
Engineering software, software class A, two
■ Application languages (English, German), runs under
opreation system
Windows XP Professional 32 Bit,
The total solution described can be used in the following sectors Windows 7 Ultimate 32/64 Bit,
of the process industry: Windows Server 2003 R2 Standard 32 Bit or
• Chemical industry Windows Server 2008 R2 Standard 64 Bit,
single license for 1 installation
• Pharmaceutical industry
• Engineering license for one customer plant. 7MP2990-0AA00
• Water and wastewater Delivery form: can be downloaded, with certif-
• Glass and solar icate of license
• Oil & gas
• Food and beverage industry
• Minerals and mining
Notes