Académique Documents
Professionnel Documents
Culture Documents
www.c-a-m.com 432-381-8750
Raising Performance. Together TM
www.c-a-m.com
432-381-8750
TYPE 81 RAM PREVENTER • The Type 81 Ram Type BOP is comparable with Shaffer's Sentinel II and WSI
Duke style blowout preventers.
• The Type 81 Manual is available in 7-1/16 X 3M & 9 X 3M pressure ratings.
• Type 81 Hydraulic is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M and
9 X 5M pressure ratings.
• Available in Single, Double and Triple Configurations.
• Type 81 Ram Blocks are available in the following sizes:
7-1/16 X 3M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset
7-1/16 X 5M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset
9 X 3M/5M - CSO (Blind) to 7-5/8" - 1.660" to 3-1/2" Offset
TYPE 84 ANNULAR
• The Type 84 Annular BOP is comparable to Hydril's Type GK Annular
• The Type 84 Annular is available in 7-1/16 X 3M, 7-1/16 X 5M "SHORTY",
9 X 3M, 11 X 3M, 11 X 5M, 13-5/8 X 3M and 13-5/8 X 5M
• Packing Units are available in both Synthetic and Natural Compounds.
Packing Units and Seals are interchangable with Hydril GK Annulars
• Available with flanged or studded bottom.
• Notice: 7-1/16 X 5M Type 84 "Shorty" requires specific Unit & Seal Kit.
TYPE 90 ANNULAR
BISON ACCUMULATORS
Notice: Townsend, is not affiliated with Shaffer, Hydril, Stewart & Stevenson or Koomey. Cameron Type U, Shaffer
LWP, LWS, Chasavoy, Sentinel, Hydril GK, WSI, Cad, Stewart & Stevenson and Koomey are trademarks of the above
mentioned companies and reference to this equipment is intended for reader's reference only. Townsend does not intend
to give the reader the impression that it manufactures any equipment for any of the above companies. Townsend and
it's logos and literature are also protected by trademarks and copyright laws.
6A
36
23
43
42
20
16
Note: Item 16 & 17 - INNER & OUTER ADAPTER O-RINGS IN OLD STYLE TYPE 82 PREVENTERS ONLY.
A
11 B
11 A
11
11
34
33
32
35
28
29
30
31
3
4 27
12 38
5
25 24 13
15
6
26
16 21
7
20 19
5
10
4 9
8
9
16 37
13
11 15
12 14
17
18
NOTE:
7 RAM SHAFT SEAL ASSEMBLY CONSIST OF ITEMS MARKED WITH ASTERISK.
22
40
19 20
18
22
41
21
25 24
16
17
23
6
15 35
10
36 38
37
34 26
12
7 42
5 2
31
30
11 32
28 29
27
9
33
8
3
13
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
*25 2 4 OPERATING PISTON ROD TO INT. FLANGE ST-18492-92 ST-18492-92 ST-18492-92 ST-18492-92
SEAL
*26 2 4 OPERATING PISTON SEAL ST-704774 ST-704774 ST-704774 ST-704774
*27 2 4 TAIL ROD SEAL ST-11741-32 ST-11741-32 ST-11741-32 ST-11741-32
*28 2 4 WIPING SEAL ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-
70
*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-18491-73 ST-18491-73 ST-18491-73 ST-18491-73
*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90
*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90
*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90
22
40
19 20
18
22
41
21
25 24
16
17
23
6
15 35
10
36 38
37
34 26
12
7 42
5 2
31
30
11 32
28 29
27
9
33
8
3
13
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
*25 2 4 OPERATING PISTON ROD TO INT. FLANGE ST-18492-91 ST-18492-91 ST-18492-90 ST-18492-90
SEAL
*26 2 4 OPERATING PISTON SEAL ST-704773 ST-704773 ST-704772 ST-704772
*27 2 4 TAIL ROD SEAL ST-11741-33 ST-11741-33 ST-11741-34 ST-11741-34
*28 2 4 WIPING SEAL ST-6227-38-1-70 ST-6227-38-1-70 ST-6227-40-1-70 ST-6227-40-1-
70
*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-6227-29-13-90 ST-6227-29-13-90 ST-6227-31-13-90 ST-6227-31-13-90
*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-34-13-90 ST-6227-34-13-90 ST-6227-36-13-90 ST-6227-36-13-90
*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-44-13-90 ST-6227-44-13-90 ST-6227-49-13-90 ST-6227-49-13-90
*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-48-13-90 ST-6227-48-13-90 ST-6227-88-13-90 ST-6227-88-13-90
6
5
7
8
11
9
10
12
48
37
15
12
16
14
17 13
45
29
26 32
36 51 28
34 35
31 38 25
39
14 40 30
50 46
13
41 18
22 47 42
43
44
21 33
27
18
23 24
10 2 LOWER PISTON SEAL 63-15614 63-15614 36 2 RAM GUIDE PIN TH8126 TH8126
16 6 1/4" NPT PIPE PLUG TH816 TH816 43 2 PROTECTOR, M.OR. TH8133 TH8133
17 2 1/3" NPT WEEP PLUG TH817 TH717 44 2 LOCKING SHAFT TH8134 TH8134
18 12 3/4" X 9-3/8" HEX HEAD BOLT TH818 TH818 45 2 RAM SHAFT TH8135 TH8135
21 2 14" HAND WHEEL TH8111 TH8111 47 2 BONNET (LEFT OR RIGHT) TH8137 TH8137
23 2 1/4" X 1-4" S.S. SET SCREW TH8113 TH8113 51 1 RAM ASSEMBLY TYPE 81 TYPE 81
(SEE TYPE 81 RAM PAGE )
24 4 3/8" X 3/4" BOLT TH8114 TH8114
25 4 SEAL TH8115 TH8115 NOTE: TYPE 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR
REQUIRES SPECIAL SEAL KIT & PACKING UNIT.
20
7
19
6
18
13
12
11
14
10
14
8 24 52 29
55
9
64
15 62 60
32
1
17
66 63
58
56
67 53 44
51 43
54 44
59
65
57
30
35
23 34
36 35
1 31 27
4
26
40 41
42 47
48 50
73
31
73
38
69 37
39
70
72 71
*11 1 UPPER ADAPTER I.D. SEAL 31104 31104 52 2 RETAINER - THRUST BUSHING TH7140 TH7140
*12 1 LOWER ADAPTER I.D. SEAL 31002 31002 53 4 OUTER THRUST BUSHING SEAL TH7141 TH7141
*13 1 O.D. ADAPTER SEAL 30408 30408 54 4 INNER THRUST BUSHING SEAL TH7142 TH7142
*14 1 TOP ADAPTER SEAL 30244 30405 55 2 SCRAPER RING - LOCKING SHAFT TH7143 TH7143
*15 2 PISTON WEAR RING 150613 150613 56 2 HINGE BRACKET TH7144 TH7144
7 4
5
8
9
11
10
12
10 LOWER PISTON SEAL 2 TA84-5614 *TA84-5614 TA84-2869 TA84-1604 TA84-2599 TA84-0735 TA84-8165
* NOTE: 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIFIC SEAL KIT AND PACKING UNIT.
20
19 7
18
5
2
14
14
13 13
16B
11 4
16B 11
12
12
15
3
10
10 15
10
8 15
16 15
9 8A 8
16A
9 9A
9A
16 16A
NOTE: Items 9A & 16A are for 6 X 3M & 6 X 5M "New
Style" Type 90 Annular BOPS and require an additional
lower piston seal and the 1" piston I.D. wear band material 1
changes to 1/2" wear band material. Item 16B is an
additional wear band added to adapter I.D. after 2005.
17
NOTE: Items 8 & 8A are specific to 13-5/8 X 3/5M annular
preventers. Item 8 is a polymeric type seal and 8A is a hard
band type seal. New 13-5/8 X 3/5M Type 90 Annular, after
7/1/08 are equipped at the factory with the hard band type seal.
7-1/16 X 3M - 7-1/16 X 5M - 9 X 3M
11 X 3M - 11 X 5M - 13-5/8 X 5M
TOWNSEND TYPE 90 ANNULAR BOPS ARE AVAILABLE WITH
STANDARD PACKING UNITS OR THE PATENTED ANUFLEX STYLE UNIT.
THE ANUFLEX INSERT HINGES AS THE RUBBER IS CLOSED AND
OPENED. ANUFLEX PACKING UNITS HAVE A LONGER LIFE CYCLE.
SHAFFER SENTINEL I & II & WSI are registered trademarks of their respective companies. Townsend International BOP is not affiliated with these companies.
REDA-CABLE SLOT
"FLAT OR ROUND"
RAM ASSEMBLY REDA-CABLE SIZE RAM BLOCK FACE SEAL TOP SEAL
2 1.90" 2 1.25"
4 1.625" 4 1.125"
FLAT 6 1.50" 6 1.00" ROUND
REDA-CABLE REDA-CABLE
7-1/16" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
9" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
NOTICE: TOWNSEND is not affiliated with Shaffer. Shaffer and Chasavoy are registered trademarks of Shaffer.
Revision: March 2010
TOWNSEND
36
Raising Performance. Together TM
www.c-a-m.com
432-381-8750
O.D. 8” x 3M 13-5/8” x 3M
6” x 3M 10” x 3M 10” x 5M
PIPE 8” x 5M 13-5/8" x 5M
Type 39 Type 39 Type 48
INCHES Type 39 Type 480
C.S.O. 192035-0 192213-0 192416-0 192616-0 192774-5
RETAINER SCREW
Fits All 192034 192034 192034 192034 192034
Pipe Sizes
BOP A, B, E, A, B, E, A, B, E, A, B, E, A, B, E,
TYPE 39 39 LWS, 39 LWS, 39 LWS
O.D. RAM RAM BLOCK RAM RAM BLOCK RAM RAM BLOCK
PIPE SIZE BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY
NOTE: Block Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber to Block Screws only.
CSO TM8250-7RR *
1.660 TM8251-7RR *
1.900 TM8252--7RR *
2-1/16” TM8253-7RR *
2-3/8” TM8254--7RR *
* NOTE: Two Retainer Screws, Part #TM82-5545 are
2-7/8” TM8255-7RR * included with each Ram Rubber.
3-1/2” TM8256-7RR *
4” TM8269-7RR *
4-1/2” TM8257-7RR *
5” TM8260-7RR *
* NOTE: Standard pipe sizes that are available at most
5-1/2” TM8258-7RR * stocking locations. Other sizes stocked at TOWNSEND
main warehouse locations.
Retainer
TM82-5545 *
Screw
4” TM8269-7RB TM8269-7SA
5” TM8260-7RB TM8260-7SA
H2S Trim
TM8211-7RS TM8211-7RS
Retractor Screw
NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
TOWNSEND TYPE 82
(COMPATIBLE WITH SHAFFER LWS)
TOWNSEND offers standard pipe and casing sizes at each of our store
and agent locations for easy accessibility to our customers. Offset and
dual bore pipe sizes are available upon special request.
O.D.
11 X 3M 11 X 5M 13-5/8 X 3/5M
PIPE
TYPE 82 TYPE 82 TYPE 82
INCHES
C.S.O. TM8250-113RR TM8250-115RR TM8250-13RR
All TOWNSEND Ram Blocks are tested for strength and have
supporting material certifications and traceability records.
TOWNSEND also offers Offset and Dual Offset Blocks along
with other pipe sizes not listed.
O.D. RAM RAM SUB RAM RAM SUB RAM RAM SUB
H2S
RETRACTOR TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS
SCREW
NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
STANDARD
RETRACTOR 137881 137881 137881 137881
SCREW
H2S
142061 (CSO - 7”) 142061 (CSO – 7”)
RETRACTOR 142061 142061
142065 (7-5/8” - 8-5/8”) 142065 (7-5/8” - 8-5/8”)
SCREW
O.D. PIPE 7-1/16” BORE 11” BORE 13-5/8” BORE 16-3/4” BORE 21-1/4” x 2M 21-1/14” BORE
UPPER SEAL
Fits All ST-19475 ST-19270 ST-19517 ST-38863 ST-19514 ST-40972
Pipe Sizes
BLOCK
NOTE: TOWNSEND manufactures the same series in Shear Ram Blocks. Contact a TOWNSEND representative for additional information.
TOWNSEND’S Variable Bore Ram Rubbers (“VBR”) are designed to seal around a variety of pipe sizes.
TOWNSEND’S also manufactures the “VBR” Ram Block in both 11” and 13-5/8” sizes to fit the "ST" Blowout Preventers.
TOWNSEND’S Finger Insert design rotates as the hydraulic pressure is applied and the Ram Blocks begin to close allowing
the Ram Rubber to seal around a variety of pipe sizes and eliminating changing Ram Rubbers each time you change pipe
size. TOWNSEND’S “VBR” Rubbers have been field tested to confirm durability.
11” 13-5/8”
ITEM DESCRIPTION
5M/10M 5M/10M
4
2 Ram Block 4-1/2” - 7” ———– ST-46671-01
3
Note: TOWNSEND “VBR” Rubbers and Top Seals do not fit Standard Type U Ram Blocks, but are 2
interchangeable with OEM Rubbers & Blocks.
TOWNSEND manufactures "SBR" style Ram Blocks and Ram Rubbers for
TOWNSEND Type "ST" Blowout Preventers. (SBR – Shear Blind
Rams)
TOWNSEND Type ST Shear Blind Ram Blocks meet OEM standards, and
comply with TOWNSEND’S own strict Quality Assurance Program. Each
set of Ram Blocks are backed by material certifications and inspection
documentation. All Ram Blocks are made from specified materials to
ensure resistance to H2S gases.
7-1/16 x 5/10/15M
4
1 Right Side Packer
DESCRIPTION PART NO.
2 Left Side Packer
Right Side Packer Paddle ST-49358-01 3 Blade Packer
4 Top Seal
Left Side Packer Paddle ST-49358-02 5 Upper Block
5 7
6
9
5 Cap Screw, Hinge Brkt. Sm. 4 (2) TH7146 TH7146 TH7146 TH7146-11-5 TH7146-11-5
5 Cap Screw, Hinge Brkt Lg. 2 TH7147 ----- ----- ----- -----
4
2
1 Operating Piston
2 Operating Cylinder
3 Ram Change Piston – Open
4 Ram Change Piston – Close
5 Ram Change Cylinder
6 Locking Screw
3 1 5
6
ST-30320 (O/S)
7-1/16 x 3/5M ST-30274-2 ST-30324 ST-30325 ST-30273-2 ST-30326
ST-667940
ST-30320 (O/S)
7-1/16 x 10/15M ST-30274-2 ST-30324 ST-30325 ST-30273-2 ST-30326
ST-667940
ST-30364 (O/S)
11 x 3/5/10M ST-30274-3 ST-30362 ST-30363 ST-30273-3 ST-30365
ST-673178
ST-30311 (O/S)
12 x 3M ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307
ST-679816
ST-30311 (O/S)
13-5/8 x 5M ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307
ST-679816
ST-31240 (O/S)
13-5/8 x 10/15M ST-30274-1 ST-31239 ST-31238 ST-30273-1 ST-30307
ST-678512
ST-38846 (O/S)
16-3/4 x 5M ST-30274-6 ST-38847 ST-30848 ST-30273-6 ST-38901
ST-689562
ST-30847 (O/S)
20 x 2/3M ST-30274-4 ST-30848 ST-30849 ST-30273-4 ST-30846
ST-690058
TOWNSEND’S Bonnet Rebuild Kit cannot be compared with kits offered by OEM’s. TOWNSEND’S Kits exclude major expense items that
usually do not need replacing.
Each TOWNSEND Bonnet Rebuild Kit comes with an exploded view of the Bonnet with a listing of parts included in each Kit.
9 x 3M 841000 NOTE: Shaffer Type 39, XHP, and A Seal Kits are not offered because of movement, however,
Bonnet Rebuild Kits are available upon request. Wellsite (WSI) Kits are also available.
TOWNSEND TYPE 81 BOP SHAFFER TYPE LWS BOP CAMERON TYPE SS BOP
SERIES KIT NO. SERIES KIT NO. SERIES KIT NO.
7-1/16 X 3M MANUAL TM8100 6 x 3/5M 880000
7-1/16 x 3/5M 16206-06
7-1/16 X 3M HYDRAULIC TH8100 8 x 3/5M 881000
8 x 3M 16036-103
7-1/16 X 5M MANUAL TM8100 11 x 3M 880000
8 x 5M 16036-105
7-1/16 X 5M HYDRAULIC TH8100 11 x 5M 881000
TOWNSEND “ST” BOP NOTE: Shaffer SL POS/LOCK Kits are available HYDRIL TYPE V BOP
upon request.
SERIES KIT NO.
SERIES KIT NO.
7-1/16 X3/5/10M ST-644909-01 CAMERON TYPE U BOP 7-1/16 x 3/5M 3104728
11 X 3/5/19M ST-644909-02 SERIES KIT NO.
11 x 3/5M 3104747
13-5/8 X 3/5/10M ST-644909-03 7-1/16 x 3/5M 644909-01
13-5/8 X 3/5M 3104766
7-1/16 x 10/15M 644909-01
NOTE: TOWNSEND does not include Door NOTE: Each Seal Kit is to repair one Bonnet.
Seals with Seal Kits, they are sold separately. If repairing a Single BOP, it would require two
(2) Kits.
TOWNSEND manufactures a wide range of Door Seals to fit all the different
types and series of Cameron, Shaffer, Hydril, and WSI Blowout Preventers.
TOWNSEND Door Seals are manufactured under a strict Quality program to
insure that the product has the same material breakdown and characteristics
as the OEM.
Metal spring inserts and an Elastomeric Fabric are molded in specific Door
Seals to correspond to OEM requirements.
All TOWNSEND Door Seals meet TOWNSEND’S strict Quality Control
Program and comply with API and ISO standards.
In some cases the OEM offers more than one version or style Door Seal for a particular Preventer. TOWNSEND also offers the different
styles. TOWNSEND’S Part Number may not coincide with OEM’s current number. Contact a TOWNSEND representative for crossover.
SHAFFER TYPE 39 BOP SHAFFER TYPE LWP BOP SHAFFER TYPE B BOP
SHAFFER TYPE LWS BOP TOWNSEND TYPE 99 HYDRAULIC CAMERON TYPE SS BOP
6 x 3M 30030 6 x 3M 18493-5
7-1/16 X 5M TH9906
6 x 5M 30030 6 x 5M 18493-5
TOWNSEND’S Packing Units are tested before sale using API test standards in
both open hole conditions and on drill pipe. All Packing Units are subject to a
API drift test after performing Annular test on rubber to confirm that they will
open back up to standard size.
TOWNSEND is not just a rubber company, we take pride in the fact that we
produce Blowout Preventer replacement parts, both metal and rubber. Years of
experience and testing has helped TOWNSEND become a major player in the
industry.
NOTE: TOWNSEND 7-1/16 X 5M Type 84 Annular requires special seal kit and
packing unit.
HEAD
LOCKING
SCREW
RUBBER TYPE
HEAD
SERIES LOCKING
SCREW
SYNTHETIC NATURAL
PACKING
UNIT 7-1/16" x 3M TA84-1078-S TA84-1078-N TA84-1607
7-1/16" X 5M
TOWNSEND TA84-1078-S TA84-1078-N TA84-1607
SHORTY
7-1/16" x 5M
TA84-0667-S TA84-0667-N TA84-0695
HYDRIL GK
7-1/16" X 5M
TA84-1602 TA84-1603 TA84-1604 TA84-5614 TA84-0683 TA84-9644
TOWNSEND 84
7-1/16” x 5M
TA84-0690 TA84-0689 TA84-0688 TA84-0705 TA84-0684 TA84-9644
HYDRIL GK
13-5/8” x 5M
TA84-1738 TA84-8151 TA84-8152 TA84-8165 TA84-0691 TA84-9644
Latched Head
QTY REQ’D 1 2 2 2 1 N/A
TOWNSEND is not just another rubber company, we TA90-0847 7-1/16” x 3M/5M SYNTHETIC
take pride in the fact that we are one of the largest full
line Blowout Preventer replacement part TA90-0848 7-1/16” x 3M/5M NATURAL
manufacturers in the world.
BASE
TOWNSEND’S ANUFLEX segment is made of two parts which
PLATE are moveable with respect to one another. The freedom of one
part with respect to the other limits the force which the metal
segments may exert on drill pipe as the hydraulic piston moves
the sealing element into a closed position.
UPPER
SEGMENT
BASE
PLATE
The design of the segment allows the smaller portion of each segment
base plate to pivot, functioning as a toe plate, supporting and directing
the cold flow of rubber upwards towards the sealing bore of the
element. This action increases the longitudinal length of the seal,
greatly improving the capability of the seal to contain higher pressures
than standard segmented units.
TOWNSEND skid mounted High Pressure Test units are available in a variety
of working pressures up to 30,000 lbs test pressure. The test equipment is
available in unit mounted, portable, skid mounted, and self contained 50 gallon
tank skid mounted units.
TOWNSEND test units are specifically manufactured for testing BOP Stacks,
Valves, Chokes, Kill Lines and Christmas Trees. (Air and water supply are
required.) Chart Recorders and High Pressure Hose assemblies are also
available upon request. Test units are manufactured to customers specifications
and instructions.
0902-0100 Charging & Guage Assembly 1111-3100 1” Full Flow Air Operated Regulator
KOOMEY, STEWART & STEVENSON, SHAFFER, and VALVCON are registered trademarks.
3020-0133 Trip Rod – 50:1 Alemite Pump 7410-0500 "Blind Ram" Name Plate
3020-0199 50:1 Alemite Air Motor Repair Kit 7410-0700 "Pipe Ram" Name Plate
3021-0199 60:1 Alemite Air Motor Repair Kit 7410-0800 "By-Pass" Name Plate
4060-3100 0-10M Gauge – 4-1/2” Face (1/4” LBM) PART NO. DESCRIPTION
OVAL
BX STYLE RING GASKETS
REGULAR 316
RING
FLANGE/PSI STEEL STAINLESS
SIZE
PART NO. PART NO. OCTAGONAL
All Studs and Bolts are B-7 API standard and Nuts are Grade 2H
Hex Nuts.
300-715 8 3/4” x 5-1/2” 2-1/16” x 10M 300-315 N/A 1" x 4-1/4" N/A - BOP
PART NO. QTY REQ’D DESCRIPTION FLANGE 300-782 24 1-5/8” x 8-1/4” 20” x 2M
300-706 1-1/2”
300-701 7/8” 6” x 3M to 6” x 5M COMBINATION STUD
300-707 1-5/8”
300-702 1”
PART NO. QTY REQ’D DESCRIPTION
300-708 1-3/4”
300-703 1-1/8”
300-709 1-7/8” 300-796 12 1-1/8” x 1-3/8” x 7-1/4” Combination
300-704 1-1/4”
TOWNSEND ACCESSORIES
CROSSES TEES
COMPANION FLANGES
API RING GASKETS
BLIND FLANGES
API STUDS & NUTS
DIMENSIONS
SIZE STYLE 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 9 X 5M
BOP CAPACITIES
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 9 X 5M
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 9 X 5M
DIMENSIONS
SIZE STYLE 7-1/16 X 5M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
BOP CAPACITIES
SIZE 7-1/16 X 5M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
WEIGHTS
SIZE 7-1/16 X 5M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
DIMENSIONS
SIZE STYLE 9 X 3M
BOP CAPACITIES
SIZE 9 X 3M
WEIGHTS
SIZE 9 X 3M
STUDDED 1,170
SINGLE
FLANGED 1,430
STUDDED 2,200
DOUBLE
FLANGED 2,460
DIMENSIONS WEIGHTS
OVERALL HEIGHT
STUDDED SINGLE 20.50" STUDDED 1,400
(LESS STUDS)
SINGLE
OVERALL HEIGHT FLANGED 1,600
DOUBLE 33.88"
FLANGED
BOP CAPACITIES
SIZE 7-1/16 X 5M
PISTON STROKE
4.062"
(TO OPEN & CLOSE) (INCHES)
SHAFFER CHASOVOY is a registered trademark of it's respective company. TOWNSEND INTERNATIONAL BOP is not affiliated with this company.
OVERALL LENGTH 96-1/4" 96-1/4" 112-1/8" 112-1/8" 13-5/8 X 3M 7,200 LBS. 14,300 LBS.
OVERALL WIDTH 25-1/8" 25-1/8" 29-1/4" 29-1/4" 13-5/8 X 5M 7,700 LBS. 14,800 LBS.
WORKING PRESSURE (LBS.) 3000 PSI 5,000 PSI 3,000 PSI 5,000 PSI
TEST PRESSURE (LBS.) 3000 PSI 5,000 PSI 3,000 PSI 5,000 PIS
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M
OVERALL HEIGHT
STUDDED
LESS STUDS 40" 40"
BOTTOM
(STUDDED TOP)
OVERALL WIDTH ANNULAR
33" 33"
(AT LARGEST PART) BODY
OVERALL LENGTH RAM BODY 63" 63"
BOP CAPACITIES
SIZE 7-1/16 X 3M 7-1/16 X 5M
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M
STUDDED 4,000 LBS. 4,500 LBS
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M
OVERALL HEIGHT
STUDDED
LESS STUDS 35-1/2" 35-1/2"
BOTTOM
(STUDDED TOP)
OVERALL WIDTH ANNULAR
29" 29"
(AT LARGEST PART) BODY
OVERALL LENGTH RAM BODY 58" 58"
BOP CAPACITIES
SIZE 7-1/16 X 3M 7-1/16 X 5M
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M
STUDDED 4,675 4,675
DIMENSIONS
OVERALL HEIGHT STUDDED 27-3/4" 30-3/4" 32-3/4" 33" 34-1/4" 39-5/8" 39-3/8"
LESS STUDS
(STUDDED TOP) FLANGED 32" 33-1/2" 37-3/4" 38" 39-1/4" 47-3/4" 45-1/4"
OPENING THROUGH PREVENTER 7-1/16" 7-1/16" 9" 9" 11" 11" 13-5/8"
WORKING PRESSURE (LBS.) 3,000 5,000 3,000 5,000 3,000 5,000 3,000
TEST PRESSURE (LBS.) 3,000 5,000 3,000 5,000 3,000 5,000 3,000
BOP CAPACITIES
MAXIMUM OPERATING PRESSURE 1,500 1,500 1,500 1,500 1,500 1,500 1,500
RECOMMENDED OPERATING PSI 1,500 1,500 1,500 1,500 1,500 1,500 1,500
VOLUME OF FLUID TO OPEN 2.24 2.24 3.41 3.41 5.54 7.98 8.94
VOLUME OF FLUID TO CLOSE 2.85 2.85 4.33 6.84 7.43 9.81 11.36
PISTON STROKE (INCHES) 4-1/18" 4-1/2" 5-3/4" 5-3/4" 6-1/8" 7-1/8" 7-1/8"
WEIGHTS
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3/M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
OVERALL HEIGHT STUDDED 25-1/2" 25-1/2" 27-1/8"" 27-1/8" 33-7/8" 34-1/2" 37-5/8"
LESS STUDS
(STUDDED TOP) FLANGED 29-1/4" 30-7/8" 32-1/2" 32-7/8" 41-1/2" 41" 45"
OVERALL WIDTH BODY 29" 29" 35-1/2" 39-1/2" 44-3/4 46-1/2" 50"
OPENING THROUGH PREVENTER 7-1/16" 7-1/16" 9" 11" 11" 13-5/8" 13-5/8"
HYDRAULIC CONNECTION (2) 1" 1" 1-1/4" 1" 1-1/4" 1-1/2" 1-1/2"
WORKING PRESSURE (LBS.) 3,000 5,000 3,000 3,000 5,000 3,000 5,000
TEST PRESSURE (LBS.) 3,000 5,000 3,000 3,000 5,000 3,000 5,000
BOP CAPACITIES
MAXIMUM OPERATING PRESSURE 1,500 1,500 1,500 1,500 1,500 1,500 1,500
RECOMMENDED OPERATING PSI 1,500 1,500 1,500 1,500 1,500 1,500 1,500
VOLUME OF FLUID TO OPEN 3.43 3.43 5.03 6.78 14.59 17.41 17.41
VOLUME OF FLUID TO CLOSE 4.92 4.92 7.23 11.00 18.67 23.58 23.58
PISTON STROKE (INCHES) --- --- --- --- --- --- ---
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
PIPE WIPERS
TOWNSEND offers Single, Dual and Dual Split Pipe Wipers. Pipe Wipers are available in 9”
through 19”. Single and Dual Solid Pipe Wipers have a hard rubber insert to prevent Wiper from
being pulled through Master Bushing. Dual Split Pipe Wipers have a metal spring insert which
allows Wiper to split and wrap around pipe when using a Solid Master Bushing.
TONG STRAPS
TOWNSEND offers Tong Pull Back Straps with the Brass Inserts to prevent sparks on use with gas
wells. TOWNSEND's Tong Straps are made from the highest quality rubber compounds to guarantee
longevity and strength.
SWAB CUPS
TOWNSEND offers Swab Cups with either Steel Sleeves or Aluminum. TOWNSEND's Swab Cups
are available in Standard and Oversize styles. TOWNSEND's Swab Cups have been specially
designed to pull the maximum load while swabbing.
SAF-T-SLIDE
Saf-T-Slide is designed for use as a quick escape device from a structure, tower or derrick in
DE
case of an emergency. Saf-T-Slide is constructed of materials such as Aluminum Wheels and
RR
IC K
Brass Braking Device to prevent sparks when in an H2S gas environment. The Saf-T-Slide
Brake is spring loaded to lock any time the device is not in use. The descent from the structure
is controlled by a Hand Brake which the operator controls. The Saf-T-Slide is easily maintained
and operates in all types of weather.
GR
O UN
D