Académique Documents
Professionnel Documents
Culture Documents
Cover
Commands
Commans 2
Commands 3
Profiles
How-To
Basic-Draft
Draft
more commands
Pipes
Search
PDMS to Navisworks
Colours
From PDMS to PDMS
Word Docs
Glossary
Cladding Macro
PDMS Query Commands
Page 3 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Q GWEI GIVES THE CE GROSS WEIGHT
Page 4 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Q PI WRT/* (PIPING) GIVES THE CE (PIPE SUPPORT) LOCATION
Page 5 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Q TYPE GIVES THE CE TYPE ie SCTN, PANE
ADD ALL EQUIP WITHIN VOL CE ADDS ALL EQUIPMENT THAT OVERLAPS CE
ADD ALL SCTN WITHIN VOL CE ADDS ALL SECTIONS THAT OVERLAP CE
ADD ALL STRU WI PURP EQ 'PS' ADDS ALL STRU WITH PURPOSE ATTRIBUTE
ADD CE ADDS CE
AXES AT PPLI TOS PROP 1 PLACES AXES AT THE END OF TOS PLINE
Page 6 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
MOVES CURRENT ELEMENT X (EAST) BY 100mm WITH
BY X100 WRT/*/(PDMS PLATES) RESPECT TO WORLD
FLIP CE FLIPS CE
MOVE U WRT/* THR ID@(PDMS) MOVES CE UP ONTO SELECTED ITEMS JUSTIFICATION LINE
Page 7 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
MOVES THE CE IN A S 45 E DIRECTION BY SOUTH 2000 (NOT
MOVES S 45 E WRT WORLD S 2000 THE HYP LENGTH)
NEW SCTN COPY PREV BY E200 WRT CE COPIES E200 WRT CE AXIS
(PDMS)
NEW SCTN COPY PREV MIRRO PLA E THR MIRROR COPIES CE ABOUT CO-ORDS ON A E DIRECTION
E118000 N118000 U26000 WRT/*(PDMS)
NEW STRU COPY PREV MOVE W WRTCE TO COPIES A NEW STRU AND MOVES IT WEST WRT TO CE AND
IDPL@ (PDMS) TO A SELECTED PLIN
PIN DIR D WRT/* THR IDPL@ MOVES PIN1 DOWN TO A SELECTED PLINE
PIN1 AT PPLI BOS PROP .5 POSITIONS PIN1 AT MID POINT ON BOS PLINE
PIN2 DIR U WRT/* THR IDPL@ MOVES PIN2 DOWN TO A SELECTED PLINE
Page 8 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
RETURNS THE CURRENT ELEMENT CONNECTION
Q CREF REFERENCE (IF IT HAS ONE)
Page 9 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
RETURNS THE CURRENT ELEMENT NAME WITHOUT
Q NAMN FORWARD SLASH
Page 10 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
REPRES HOLES ON ADDS HOLES REPRESENTATION
ROT THR W10000 N 20000 U30000 WRT/*ABO ROTATES CE ABOUT CO-ORDS WRT TO WORLD ABOUT VERT
U BY 90 AXIS BY 90 DEG
ROT THRO POSS ABO D BY 45 ROTATES CE ABOUT START POS BY45 DEG
WITHIN VOL CE 500 COL 4 SET AT PS WITHIN A VOL OF +500 COL YELLOW
Page 11 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Q LSHAPE GIVE THE LABEL LEADER LINE STATUS
Page 12 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
NLPN OFF TURNS LINE OFF(ie CLOUD VERTEX)
HIGH CE HIGHLIGHTS CE
NEW CIRCL DIAM 100 AT@ DRAWS CIRCLE AND POSITIONS BY CURSOR
NEW RECT XLEN40 YLEN20 ANG 45 ORIG DRAWS RECT AND POSITIONS IT BY CURSOR
CORNER AT @
NEW GLAB COPY PREV AT@ COPIES TEXT AND POSITIONS BY CURSOR
Page 13 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
SNAP ON 10 GIVES SNAP GRID X10 Y10
GLOSSARY
Page 14 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
VERT P POINTED OWNED BY NXTR
Page 15 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
TO COPY PIECE OF EQUIPMENT IN LAYOUT CREATE NEW EQUIP UNDER ZONE
Q POS OF EQUIP ,THEN CREATE OR TYPE NEW EQUIP AND MAKE POS SAME THEN NAM /FEET, VAR1NAM(ON BOX 1)VAR2N
THEN NEW BOX COPY $V1,THEN ,NEW BOX COPY $V2
inc.mac
Anywhere on your pc. If you put it in c:\temp then type $m/c:\temp\inc.mac
create an output file, edit it and run it back in. You can use Utilities>Db listing or type
File /c:\temp\supps.txt
OUTPUT CE (when you are at zone A)
TERM
Edit the file in Notepad wordpad etc. Will need to rename all named elements.
Navigate to zone B
$m/c:\temp\supps.txt
create gusset with polyline in AutoCAD after that i use list command, autocad generated the coordinate of gusset in X, Y coordinate
Page 16 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
gridlines
Click "Utilities" on Structural design menu, then select "Constructs", 3D Aid Construct" form wiil come out, on this form select menu
nornally we use linear type
q evar pmllib
Q ALL STRU WI MATCHWILD(NAME,'*S0114*')
map build mdb (if there are problems in draft)(type in design)
TO MOVE OR COPY A SLOPING BEAM RELATIVE TO ANGLE TYPE CE IN THE WRT BOX
Page 17 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Page 18 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
ear, radial or pl
Page 19 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
PDMS Directions - Including Sloping Lines
======================================================================
find member setout by clicking display axes top icon under Query
to create MTO
UTILS
REPORTS
RUN
C:\AVEVA\Pdms11.6.SP3\pdmsui\reports\templates
PRESS OK THEN BOX COMES
to add everything within 2000mm of the current element add all within vol ce 2000
to add an element with transparrency and other colour ADD CE COL 2 TRANSL 25
this command adds current element red transparrency 25%
rename the names in ' ... ' to suit your project names
Change th
first number is radius
change others numbers to see mods to hole
100 = hole dia
8 = thickness
if thickness is 0 then it makes a clean hole
markdb 'before'
include $v1
Q ALL WI MATCHWILD(NAME,'*AXES*')
Q ALL STRU WI MATCHWILD(NAME,'*AXES*')
$m/%pdmsuser%/addsites.txt
$m/%pdmsuser%/strip.txt
basically the match command looks at the name of the site for the
occurance of the string 'AXES' if it doesn't find this string it returns a value
of Zero if it does then it returns a number corresponding to where it finds
the string in the character name ie if a site is called /SAM-AXES-99 it will
return the value 5 so as 5 is neq (not equal to) zero it removes it from the
view.
PDMS DRAFT NOTES
COMMANS DESCRIPTION
ADEG - ROTATION OF TEXT
CHEIGHT - SIZE OF TEXT
TPEN - COLOUR OF TEXT
LFRA - TEXT BOX/TRUE OR FALSE = ON OR OFF
LLEAD - TEXT LEADER / TRUE OR FLASE = ON OR OFF
AT@ - WHEN TEXT ELEMENT CANNOT BE SEEN
VAR1NAM - FOR COPY TEXT FROM REFERENCE DRAWING
NEW GLAB COPY V1 ON ID @ - TO FINALISE THE TRANSFER OF COPIED TEXT (ABOVE)
SORF NULREF DELETE GLAB - DELETED LABEL
LLCL - LEADER LINE CLEARANCE
NEW GLAB COPY PRE ON ID@ - COPY TAG FROM SAME VIEW
TO GIVE LABEL SECOND (I.E.(LABEL) Q BTEXT THEN GET # EQUI(C2:) NOW ADD
LABEL
#EQUI(C2:)#/(TEXT)' THN ALIGN HB TO GIVE EQUAL BOTH SIDES OF LEADERLINE
DRAFT
WHEN REMOVING A FRAM FROM VIEW AND PART WILL NOT REMOVE SELECT VIEW THEN:
MODIFY VIEW
SECTION FLAT
CHANGE WORLD POS BY 1 UNIT IN REQUIRED DIRECTION
SPPLY THEN UPDATE DESIGN
TO REMOVE ALL LINES IN A VIEW FO TO ? NOTE AND TYPE LVIS_FAL
------------------------------------
WHEN YOU CANT READ THE LONG LINES IN DRAW LIST MANAGER SEE BELOW
ON OR OFF
SE = ON OR OFF
OT BE SEEN
RENCE DRAWING
OF COPIED TEXT (ABOVE)
SEE BELOW
SOLUTION.
Page 45 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
NEW SCTN COPY PREV MOVE S 45 W WRT WORLD DIST NEW SCTN COPY PREV MOVE N 45 W WRT WORLD DIST
635 635
Page 46 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
Q ALL STRU WI MATCHWILD(NAME,'*S0114*')
Page 47 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
how to create this sorta pipe by Bob Din
BAC
PLAN S THR CE
ORI
FOR
BRAN
CONN PH TO FIRST MEM
Searching for Multi Named Steel (SDNFEMARK)
Utilities……..Quick Reports
Using MATCHWILD is a wildcard search for all (SCTN) named multi members with MS7197 in name. (ie the SDNFEMA
Run the report
The result appears in the command window
Copy and paste the reference number of the member into the command line and type add before it to add to screen.
Page 51 of 69
file:///conversion/tmp/scratch/403168962.xls
Printed:
YOU MUST HAVE A COPY OF NAVISWORKS REVIEW !!
or u can type EXPORT CE when at any tree level just to export specific stuff
=================================================================
EXPORT AUTOCOLOUR ON
--reset all autocolour rules.
EXPORT AUTOCOLOUR RESET
easy peasy
L','STLE','TRAN','GEN')
AAF Colours
ATTA Pipe attachment required for structural penetrations thro decks /walls etc
PFIT Penetration thro deck or wall plate pipe sleeve / elec transit etc
it should return the directory location of the added 3 files mentioned above
check that a file called pml.index has been created in your pmllib directory
hopefully it has
set name
this is me !
apply to create panel
This will create a cladding wall from a PANEL object , thus allowing placement of negative extrusions for holes/c
adding.plt and leslogo.png
dding.pmlfrm')
of negative extrusions for holes/cutouts or roof slopes etc...