Vous êtes sur la page 1sur 1

112

(Refer to LERE5255 for a printable .pdf file.)

4.3 Menu Structure

EMCP 3.1 Generator Set Control Menu Structure


sample screen

ENG SPEED SENSOR


ERRATIC/LOST 3/17 *2 or *3 ENTER
sample screen ACTIVE OCC 1 ESCAPE
ACTIVE EVENTS 1 sample screen
KEY KEY
GENSET CONTROL 0
EVENT LOG ENGINE CONTROL 1
GEN OVER CURRENT
WARNING 1/3 *2 *1. To adjust settings use: 1. UP and DOWN keys to select the submenu
ENGINE OVERVIEW INACTIVE OCC 1
2. Use ENTER key and UP, DOWN. LEFT, RIGHT
sample screen
key and then ENTER for the new settings to take effect
AC OVERVIEW 0kPa 23 C 24.8V
OR
0 rpm 2.1Hrs *2. Scroll down to see all events. Events are listed in the following order: Present,
CONFIGURE STOPPED Active, Inactive. Only SHUTDOWN events can be reset; some events can be set
USE as a SHUTDOWN To reset an event, the control must be in STOP. All other
I/O STATUS sample screen
events will become INACTIVE once the condition goes away.
OR AVG: 481 V L-L 324A
PREFERENCES 60.2Hz 0.82 LAGGING
TOTAL kW 216 48% *3. To RESET : press ENTER to get to the details of the event and then ENTER
again.

CURRENT LEVEL = 2 *4. To get back to the MAIN MENU at any time, press or and
CONFIGURE DROP TO MIN LEVEL
SECURITY ENTER LEVEL 1 OR 2
SETPOINTS ENTER LEVEL 3
ENG OPERATE HRS CHANGE LEVEL 1 When unsure about your location on the screen, use ESCAPE key and then refer to
CHANGE LEVEL 2
this chart.

SETPOINTS
CONTROL
CONTROL
AUTOMATIC START/STOP
ENGINE MON/PROTECT
GOV DESIRED ENG SPD *1
EVENTS
GEN MON/PROTECT
I/O
OTHER ENG MONITOR/PROTECT
BATTERY VOLT MON
ENG COOL TEMP MON
ENG OIL PRES MON *1
ENG SPEED MON

EVENTS EVENT I/P FUNCTIONS


EVENT I/P FUNCTIONS EVENT INPUT #1
EVENT O/P FUNCTIONS EVENT INPUT #2
EVENT RESPONSE CFG EVENT INPUT #3 *1
EVENT SYSTEM EVENT INPUT #4

EVENT 0/P FUNCTIONS


EVENT OUTPUT #1 *1

EVENT RESPONSE CFG


DIAGNOSTICS CONFIG
DIAGNOSTIC CONFIG
PRESSURES
ENG PROTECT CONFIG
TEMPERATURES *1
GEN PROTECT CONFIG
LEVELS
OTHER SYSTEM CONFIG
OTHERS

*1
ENG PROTECT CONFIG
PRESSURES
TEMPERATURES
*1
LEVELS
OTHERS

WARNING AUTO RESET


ENABLED STATUS *1
ENABLED

GEN MON/PROTECT
GEN AC MONITOR
*1

I/O DIGITAL INPUTS


DIGITAL INPUTS INPUT #1
RELAY OUTPUTS INPUT #2
INPUT #3
INPUT #4
INPUT #5 *1
INPUT #6

RELAY OUTPUTS
OUTPUT #1
OUTPUT #2
OUTPUT #3
OUTPUT #4 *1
OUTPUT #5
OUTPUT #6

sample screen
OTHER DIGITAL SELECTORS
DIGITAL SELECTORS DIGITAL SELECTORS #1
Digital I/P - 2 - 4 - -
REDUCED PWR MODE DIGITAL SELECTORS #2
Relay O/P 1 - - - 5 6 DIGITAL SELECTORS #3
DIGITAL SELECTORS #4
*1
*1
PREFERENCES
CONTRAST
BACKLIGHT
PRESSURE *1
TEMPERATURE
LANGUAGE

(Refer to LERE5255 for a printable .pdf file.)

Vous aimerez peut-être aussi