Académique Documents
Professionnel Documents
Culture Documents
Issue 01
Date 2017-10-31
Notice
–
NOTE
NOTE
OLT
Command Reference
huawei(config)#diagnose
huawei(diagnose)%%display xpon mode
-------------------------------------------
Current config mode: Profile-mode
-------------------------------------------
–
–
–
–
–
–
–
–
–
–
–
–
–
–
NOTE
NOTE
huawei(config-gpon-lineprofile-10)#commit
huawei(config-gpon-lineprofile-10)#quit
–
huawei(config)#vlan 8 smart
huawei(config)#port vlan 8 0/19 0
huawei(config)#vlan priority 8 6
huawei(config)#interface vlanif 8
huawei(config-if-vlanif8)#ip address 192.168.50.1 24
huawei(config-if-vlanif8)#quit
huawei(config)#interface gpon 0/2
huawei(config-if-gpon-0/2)#ont ipconfig 1 1 static ip-address 192.168.50.2 mask
255.255.255.0 gateway
192.168.50.254 vlan 8
huawei(config-if-gpon-0/2)#quit
192.168.50.2
NOTE
priority-policy
huawei(config)#btv
huawei(config-btv)#igmp cascade-port 0/2/1 ontid 1 gemport-index 16
huawei(config)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp version v3
//Create service port 101, bind port 0/3/1 to it, set the user VLAN to
untagged, and bind traffic profile 8 to the user VLAN./
huawei(config)#service-port 101 vlan 1001 eth 0/3/1 multi-service user-vlan
untagged rx-cttr 8 tx-cttr 8
//Create service port 101, bind port 0/3/1 to it, set the user VLAN ID to
10, and bind traffic profile 8 to the user VLAN./
huawei(config)#service-port 101 vlan 1001 eth 0/3/1 multi-service user-vlan
10 rx-cttr 8 tx-cttr 8
huawei(config)#diagnose
huawei(diagnose)%%display xdsl mode
-------------------------------------------
ADSL Current mode : rfc2662
VDSL Current mode : tr129
--------------------------------------------
huawei(config)#traffic table ip index 8 cir 4096 priority 0 priority-policy local-
setting
//Create service port 101, bind port 0/2/0 to it, set VPI/VCI to 0/35, and
bind traffic profile 8 to the user VLAN./
huawei(config)#service-port 101 vlan 1001 adsl 0/2/0 vpi 0 vci 35 multi-service
user-vlan untagged rx-cttr 8 tx-cttr 8
huawei(config)#interface adsl 0/2
huawei(config-if-adsl-0/2)#deactivate 0
huawei(config-if-adsl-0/2)#alarm-config 0 1
huawei(config-if-adsl-0/2)#activate 0 profile-index 1024
huawei(config)#diagnose
huawei(diagnose)%%display xdsl mode
-------------------------------------------
ADSL Current mode : rfc2662
VDSL Current mode : tr129
--------------------------------------------
huawei(config)#traffic table ip index 8 cir 4096 priority 0 priority-policy local-
setting
huawei(config)#service-port 101 vlan 1001 vdsl mode ptm 0/1/0 multi-service user-
vlan untagged rx-cttr 8 tx-cttr 8
Command:
vdsl channel-profile add 6
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be
neglected
> Do you want to name the profile? (y/n) [n]:
> Data path mode 1-ATM, 2-PTM, 3-Both (1~3) [3]:
> Will you set the minimum impulse noise protection? (y/n) [n]:y
> Minimum impulse noise protection downstream:
> 1-noProtection 2-halfSymbol 3-singleSymbol 4-twoSymbols
> 5-threeSymbols 6-fourSymbols 7-fiveSymbols 8-sixSymbols
> 9-sevenSymbols 10-eightSymbols 11-nineSymbols 12-tenSymbols
> 13-elevenSymbols 14-twelveSymbols 15-thirteenSymbols 16-fourteenSymbols
> 17-fifteenSymbols 18-sixteenSymbols
> Please select (1~18) [1]:4
> Minimum impulse noise protection upstream:
> 1-noProtection 2-halfSymbol 3-singleSymbol 4-twoSymbols
> 5-threeSymbols 6-fourSymbols 7-fiveSymbols 8-sixSymbols
> 9-sevenSymbols 10-eightSymbols 11-nineSymbols 12-tenSymbols
> 13-elevenSymbols 14-twelveSymbols 15-thirteenSymbols 16-fourteenSymbols
> 17-fifteenSymbols 18-sixteenSymbols
> Please select (1~18) [1]:4
> Will you set interleaving delay parameters? (y/n) [n]:
> Will you set parameters for rate? (y/n) [n]:y
> Minimum transmit rate downstream (32~200000 Kbps) [32]:
> Minimum reserved transmit rate downstream (32~200000 Kbps) [32]:
> Maximum transmit rate downstream (32~200000 Kbps) [200000]:50000
> Minimum transmit rate upstream (32~200000 Kbps) [32]:
> Minimum reserved transmit rate upstream (32~200000 Kbps) [32]:
> Maximum transmit rate upstream (32~200000 Kbps) [200000]:15000
> Will you set rate thresholds? (y/n) [n]:
> Will you set PHY-R function? (y/n) [n]:
> Will you set erasure decoding? (y/n) [n]:
> Will you set SOS bit rate? (y/n) [n]:
> Will you set the G.998.4 retransmission function? (y/n) [n]:
> Will you set channel initialization policy selection? (y/n) [n]:
Add profile 6 successfully
Command:
vdsl line-template add 6
Start adding template
Press 'Q' to quit the current configuration and new configuration will be
neglected
> Do you want to name the template? (y/n) [n]:y
> Please input template name:VDSL2-PORT1
> Please set the line-profile index (1~770) [1]:6
> Will you set channel configuration parameters? (y/n) [n]:y
> Please set the channel number (1~2) [1]:1 //Configurations are
required only for channel 1.
> Channel1 configuration parameters:
> Please set the channel-profile index (1~770) [1]:6
Add template 6 successfully
huawei(config)#interface vdsl 0/1
huawei(config-if-vdsl-0/1)#deactivate 0
huawei(config-if-vdsl-0/1)#alarm-config 0 1
huawei(config-if-vdsl-0/1)#activate 0 template-index 6
huawei(config)#xdsl vectoring bandplan-type 998ade us0-type type-a
huawei(config)#save
huawei(config)#traffic table ip index 8 cir 4096 priority 0 priority-policy local-
setting
huawei(config)#voip
huawei(config-voip)#ip address media 10.10.10.10 10.10.10.1
huawei(config-voip)#ip address signaling 10.10.10.10
huawei(config-voip)#quit
NOTE
huawei(config-if-h248-0)#reset coldstart
Are you sure to reset MG interface?(y/n)[n]:y
huawei(config-if-h248-0)#quit
NOTE
huawei(config)#esl user
huawei(config-esl-user)#mgpstnuser batadd 0/3/0 0/3/15 0 terminalid 0 telno
83110001
huawei(config)#pstnport
huawei(config-pstnport)#pstnport attribute batset 0/3/0 0/3/15 reverse-pole-pulse
enable
huawei(config-pstnport)#quit
huawei(config)#save
CAUTION
huawei(config)#vlan 200 smart
huawei(config)#port vlan 200 0/0 1
huawei(config)#voip
huawei(config-voip)#ip address media 10.10.10.10 10.10.10.1
huawei(config-voip)#ip address signaling 10.10.10.10
huawei(config-voip)#quit
NOTE
huawei(config)#interface sip 0
Are you sure to add the SIP interface?(y/n)[n]:y
huawei(config-if-sip-0)#reset
Are you sure to reset the SIP interface?(y/n)[n]:y
huawei(config-if-sip-0)#quit
NOTE
huawei(config)#esl user
huawei(config-esl-user)#sippstnuser batadd 0/3/0 0/3/15 0 telno 83110001
huawei(config)#pstnport
huawei(config-pstnport)#pstnport attribute batset 0/3/0 0/3/15 reverse-pole-pulse
enable
huawei(config-pstnport)#quit
huawei(config)#save
huawei(config)#vlan 300 smart
huawei(config)#port vlan 300 0/0 1
priority-policy
huawei(config)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp version v3
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp user add service-port 401 no-auth
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 401
huawei(config-mvlan1000)#quit
NOTE
–
–
–
huawei(config)#queue-scheduler strict-priority
huawei(config)#cos-queue-map cos0 0 cos4 4 cos5 5 cos6 6
–
–
serviceport-id
○
○
○
NOTE
–
–
–
huawei(config)#test
huawei(config-test)#pots emulational-call caller-port 0/3/0 callee-port
0/3/15 callee-telno 83110016
–
–
–
huawei(config)#btv
huawei(config-btv)#igmp static-join service-port 401 ip 224.1.1.10 vlan
1000