Vous êtes sur la page 1sur 80

TopPage

LC-32PX5M/X/LC-37PX5M/X

SERVICE MANUAL
No. S17B1LC37PX5M

LCD COLOR TELEVISION


Pravin Mevada
LC-32PX5M/X
MODELS LC-37PX5M/X
Collection By Pravin Mevada
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified be used.

OUTLINE
This model is based on the LC-32BX5H/M, LC-37BX5H/M and partially modified.
For the contents not covered in this Service Manual, accordingly, please refer to the LC-32BX5H/M,
LC-37BX5H/M (S56T7LC32BX5M) Service Manual.

CONTENTS
DIFFERENCES FROM BASE MODEL CHAPTER 5. BLOCK DIAGRAM/OVERALL WIRING
LIST OF CHANGED PARTS ............................. i DIAGRAM
[1] BLOCK DIAGRAM..........................................5-1
SAFETY PRECAUTION [2] OVERALL WIRING DIAGRAM (LC-
IMPORTANT SERVICE SAFETY PRE- 32PX5M/X) .....................................................5-3
CAUTION ......................................................... v [3] OVERALL WIRING DIAGRAM (LC-
Precautions for using lead-free solder............. vi 37PX5M/X) .....................................................5-5

CHAPTER 1. SPECIFICATIONS CHAPTER 6. SCHEMATIC DIAGRAM


[1] SPECIFICATIONS......................................... 1-1 [1] DESCRIPTION OF SCHEMATIC DIA-
GRAM .............................................................6-1
CHAPTER 2. OPERATION MANUAL [2] SCHEMATIC DIAGRAM .................................6-2
[1] OPERATION MANUAL.................................. 2-1
CHAPTER 7. PRINTED WIRING BOARD
CHAPTER 3. DIMENSIONS [1] OPERATION UNIT PRINTED WIRING
[1] DIMENSIONS................................................ 3-1 BOARD ...........................................................7-1
[2] LED, R/C UNIT PRINTED WIRING
CHAPTER 4. REMOVING OF MAJOR PARTS BOARD ...........................................................7-2
[1] REMOVING OF MAJOR PARTS................... 4-1
Parts Guide

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with spec-
ified ones for maintaining the safety and performance of the set.

This document has been published to be used for


after sales service only.
The contents are subject to change without notice.
LC-32PX5M/X/LC-37PX5M/X
LC-37PX5M
DIFFERENCES FROM BASE MODEL Service Manual

LIST OF CHANGED PARTS

„LC-32PX5M / LC-32PX5X

Ref. No. Description LC-32BX5M LC-32PX5M LC-32PX5X Note


PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACE ITEM)
OPERATION Unit DUNTKD685FM03 DUNTKE097FM02 DUNTKE097FM02 Changes
MAIN Unit DUNTKD892FM03 DUNTKD892FM50 DUNTKD892FM51 Changes
SUB Unit DUNTKD893FM03 DUNTKD893FM50 DUNTKD893FM51 Changes
LED, R/C Unit DUNTKD897FM03 DUNTKE095FM02 DUNTKE095FM02 Changes
VIDEO-IN3 Unit DUNTKD898FM03 - - Delete
POWER Unit exchange RDENCA182WJQZ RDENCA182WJQZ RDENCA182WJQZ No Changes
LED, R/C UNIT (DUNTKD095FM02)
J101 Jack QJAKJA014WJZZ - - Delete
R111 Resistor 22 1/4W Metal Oxide VRS-TW2ED220JY - - Delete
R112 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R113 Resistor 22 1/4W Metal Oxide VRS-TW2ED220JY - - Delete
R114 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R115 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102JY - - Delete
SUB UNIT (DUNTKD893FM50 / DUNTKD893FM51)
C1319 Capacitor 220 6.3V Electrolytic VCEASX0JN227MY - - Delete
C1320 Capacitor 10 16V Ceramic RC-KZA510WJPZY - - Delete
C1321 Capacitor 0.1 25V Ceramic VCKYCY1EF104ZY - - Delete
C1322 Capacitor 220 6.3V Electrolytic VCEASX0JN227MY - - Delete
C1326 Capacitor 1000p 50V Ceramic VCKYCY1HB102KY - - Delete
C1327 Capacitor 1000p 50V Ceramic VCKYCY1HB102KY - - Delete
C1328 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1329 Capacitor 33 10V Electrolytic VCEASX1AN336MY - - Delete
C1330 Capacitor 0.1 25V Ceramic VCKYCY1EF104ZY - - Delete
C1337 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1901 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1902 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3447 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3448 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3449 Capacitor 0.1 16V Ceramic VCKYCY1CB104KY - - Delete
C5002 Capacitor 0.01 50V Ceramic VCKYCY1HB103KY - - Delete
C5003 Capacitor 4700p 50V Ceramic VCKYCY1HB472KY - - Delete
C5004 Capacitor 4700p 50V Ceramic VCKYCY1HB472KY - - Delete
D1901 Diode DA221TL VHDDA221///-1Y - - Delete
FB5001 Ferrite Bead BLN-0051TA RBLN-0051TAZZY - - Delete
FB5002 Ferrite Bead BLN-0051TA RBLN-0051TAZZY - - Delete
FL5001 Filter RFILN0017TAZZY - - Delete
FL5002 Filter RFILN0017TAZZY - - Delete
FL5003 Filter RFILN0017TAZZY - - Delete
IC1302 IC BH3544F-E2 VHIBH3544F+-1Y - - Delete
IC1901 IC TC4W66F (TE12L,F) VHITC4W66F/-1Y - - Delete
IC1902 IC TC4W66F (TE12L,F) VHITC4W66F/-1Y - - Delete
IC2001 IC M30626FHPFPU5C RH-IXA648WJN2Q RH-IXA650WJN1Q RH-IXA650WJN1Q Changes
L1303 Coil Peaking 100uH VPCNN101J7R7NY - - Delete
P5009 Plug 14pin (VD) QPLGNA334WJZZY - - Delete
Q1302 Transistor PDTC144EE VSRDTC144EE-1Y - - Delete
Q1901 Transistor 2SC3928A VS2SC3928AR-1Y - - Delete
Q1902 Transistor UM6K1N TN VSUM6K1NTN+-1Y - - Delete
Q1903 Transistor QS6K1 VSQS6K1++++-1Y - - Delete
Q1904 Transistor PDTA144EK VSRDTA144EK-1Y - - Delete
Q2002 Transistor PDTC144EE VSRDTC144EE-1Y - - Delete
R1309 Resistor 18 1/4W Metal Oxide VRS-TW2ED180JY - - Delete
R1310 Resistor 18 1/4W Metal Oxide VRS-TW2ED180JY - - Delete
R1312 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R1313 Resistor 470 1/16W Metal Oxide VRS-CY1JF471JY - - Delete
R1314 Resistor 470 1/16W Metal Oxide VRS-CY1JF471JY - - Delete
R1901 Resistor 1k 1/16W Metal Oxide VRS-TV1JD102JY - - Delete
R1902 Resistor 1k 1/16W Metal Oxide VRS-TV1JD102JY - - Delete

i
LC-32PX5M/X/LC-37PX5M/X
Ref. No. Description LC-32BX5M LC-32PX5M LC-32PX5X Note
R1903 Resistor 4.7k 1/16W Metal Oxide VRS-CY1JF472JY - - Delete
R1904 Resistor 150k 1/16W Metal Oxide VRS-CY1JF154JY - - Delete
R1907 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1908 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1909 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1910 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1911 Resistor 150k 1/16W Metal Oxide VRS-CY1JF154JY - - Delete
R1912 Resistor 0 1/16W Metal Oxide - VRS-CJ1JF000JY VRS-CJ1JF000JY Add
R2002 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102JY - - Delete
R2003 Resistor 22k 1/16W Metal Oxide VRS-CY1JF223JY - - Delete
R2005 Resistor 22k 1/16W Metal Oxide VRS-CY1JF223JY - - Delete
R2008 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R2034 Resistor 15k 1/16W Metal Oxide VRS-CY1JF153JY - - Delete
R2051 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY VRS-CY1JF102JY VRS-CY1JF102JY Changes
R2075 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R3465 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R3466 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R5008 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102FY - - Delete
R5011 Resistor 47k 1/16W Metal Oxide VRS-CY1JF473JY - - Delete
R5014 Resistor 0 1/16W Metal Oxide VRS-CY1JF000JY - - Delete
OPERATION Unit (DUNTKE097FM02)
All parts are changed.

In trouble shooting table, “No audio heard (4)” and “No external video screen <INPUT3>” are abolished.
Refer to the PARTS GUIDE for CABINET PARTS, SUPPLIED ACCESORIES, PACKING PARTS and SERVICE JIGS.

ii
LC-32PX5M/X/LC-37PX5M/X
„LC-37PX5M / LC-37PX5X

Ref. No. Description LC-37BX5M LC-37PX5M LC-37PX5X Note


PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACE ITEM)
OPERATION Unit DUNTKD685FM13 DUNTKE097FM04 DUNTKE097FM04 Changes
MAIN Unit DUNTKD892FM13 DUNTKD892FM52 DUNTKD892FM53 Changes
SUB Unit DUNTKD893FM13 DUNTKD893FM52 DUNTKD893FM53 Changes
LED, R/C Unit DUNTKD897FM13 DUNTKD897FM53 DUNTKD897FM53 Changes
VIDEO-IN3 Unit DUNTKD898FM13 - - Delete
POWER Unit exchange RDENCA182WJQZ RDENCA182WJQZ RDENCA182WJQZ No Changes
LED, R/C UNIT (DUNTKD897FM53)
J101 Jack QJAKJA014WJZZ - - Delete
R111 Resistor 22 1/4W Metal Oxide VRS-TW2ED220JY - - Delete
R112 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R113 Resistor 22 1/4W Metal Oxide VRS-TW2ED220JY - - Delete
R114 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R115 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102JY - - Delete
SUB UNIT (DUNTKD893FM52 / DUNTKD893FM53)
C1319 Capacitor 220 6.3V Electrolytic VCEASX0JN227MY - - Delete
C1320 Capacitor 10 16V Ceramic RC-KZA510WJPZY - - Delete
C1321 Capacitor 0.1 25V Ceramic VCKYCY1EF104ZY - - Delete
C1322 Capacitor 220 6.3V Electrolytic VCEASX0JN227MY - - Delete
C1326 Capacitor 1000p 50V Ceramic VCKYCY1HB102KY - - Delete
C1327 Capacitor 1000p 50V Ceramic VCKYCY1HB102KY - - Delete
C1328 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1329 Capacitor 33 10V Electrolytic VCEASX1AN336MY - - Delete
C1330 Capacitor 0.1 25V Ceramic VCKYCY1EF104ZY - - Delete
C1337 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1901 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C1902 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3447 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3448 Capacitor 1 10V Ceramic VCKYCY1AB105KY - - Delete
C3449 Capacitor 0.1 16V Ceramic VCKYCY1CB104KY - - Delete
C5002 Capacitor 0.01 50V Ceramic VCKYCY1HB103KY - - Delete
C5003 Capacitor 4700p 50V Ceramic VCKYCY1HB472KY - - Delete
C5004 Capacitor 4700p 50V Ceramic VCKYCY1HB472KY - - Delete
D1901 Diode DA221TL VHDDA221///-1Y - - Delete
FB5001 Ferrite Bead BLN-0051TA RBLN-0051TAZZY - - Delete
FB5002 Ferrite Bead BLN-0051TA RBLN-0051TAZZY - - Delete
FL5001 Filter RFILN0017TAZZY - - Delete
FL5002 Filter RFILN0017TAZZY - - Delete
FL5003 Filter RFILN0017TAZZY - - Delete
IC1302 IC BH3544F-E2 VHIBH3544F+-1Y - - Delete
IC1901 IC TC4W66F (TE12L,F) VHITC4W66F/-1Y - - Delete
IC1902 IC TC4W66F (TE12L,F) VHITC4W66F/-1Y - - Delete
IC2001 IC M30626FHPFPU5C RH-IXA648WJN2Q RH-IXA650WJN1Q RH-IXA650WJN1Q Changes
L1303 Coil Peaking 100uH VPCNN101J7R7NY - - Delete
P5009 Plug 14pin (VD) QPLGNA334WJZZY - - Delete
Q1302 Transistor PDTC144EE VSRDTC144EE-1Y - - Delete
Q1901 Transistor 2SC3928A VS2SC3928AR-1Y - - Delete
Q1902 Transistor UM6K1N TN VSUM6K1NTN+-1Y - - Delete
Q1903 Transistor QS6K1 VSQS6K1++++-1Y - - Delete
Q1904 Transistor PDTA144EK VSRDTA144EK-1Y - - Delete
Q2002 Transistor PDTC144EE VSRDTC144EE-1Y - - Delete
R1309 Resistor 18 1/4W Metal Oxide VRS-TW2ED180JY - - Delete
R1310 Resistor 18 1/4W Metal Oxide VRS-TW2ED180JY - - Delete
R1312 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R1313 Resistor 470 1/16W Metal Oxide VRS-CY1JF471JY - - Delete
R1314 Resistor 470 1/16W Metal Oxide VRS-CY1JF471JY - - Delete
R1901 Resistor 1k 1/16W Metal Oxide VRS-TV1JD102JY - - Delete
R1902 Resistor 1k 1/16W Metal Oxide VRS-TV1JD102JY - - Delete
R1903 Resistor 4.7k 1/16W Metal Oxide VRS-CY1JF472JY - - Delete
R1904 Resistor 150k 1/16W Metal Oxide VRS-CY1JF154JY - - Delete
R1907 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1908 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1909 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete

iii
LC-32PX5M/X/LC-37PX5M/X
Ref. No. Description LC-37BX5M LC-37PX5M LC-37PX5X Note
R1910 Resistor 1M 1/16W Metal Oxide VRS-CY1JF105JY - - Delete
R1911 Resistor 150k 1/16W Metal Oxide VRS-CY1JF154JY - - Delete
R1912 Resistor 0 1/16W Metal Oxide - VRS-CJ1JF000JY VRS-CJ1JF000JY Add
R2002 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102JY - - Delete
R2003 Resistor 22k 1/16W Metal Oxide VRS-CY1JF223JY - - Delete
R2005 Resistor 22k 1/16W Metal Oxide VRS-CY1JF223JY - - Delete
R2008 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY - - Delete
R2034 Resistor 15k 1/16W Metal Oxide VRS-CY1JF153JY - - Delete
R2051 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY VRS-CY1JF102JY VRS-CY1JF102JY Changes
R2075 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R3465 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R3466 Resistor 100 1/16W Metal Oxide VRS-CY1JF101JY - - Delete
R5008 Resistor 1k 1/16W Metal Oxide VRS-CY1JF102FY - - Delete
R5011 Resistor 47k 1/16W Metal Oxide VRS-CY1JF473JY - - Delete
R5014 Resistor 0 1/16W Metal Oxide VRS-CY1JF000JY - - Delete
OPERATION Unit (DUNTKE097FM04)
All parts are changed.

In trouble shooting table, "No audio heard (4)" and "No external video screen <INPUT3>" are abolished.
Refer to the PARTS GUIDE for CABINET PARTS, SUPPLIED ACCESORIES, PACKING PARTS and SERVICE JIGS.

iv
LC-32PX5M/X/LC-37PX5M/X
LC-37PX5M
SAFETY PRECAUTION Service Manual

IMPORTANT SERVICE SAFETY PRECAUTION


Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:

„WARNING • Connect the resistor connection to all exposed metal parts having a
return to the chassis (antenna, metal cabinet, screw heads, knobs
1. For continued safety, no modification of any circuit should be
and control shafts, escutcheon, etc.) and measure the AC voltage
attempted. drop across the resistor.
2. Disconnect AC power before servicing. All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a non polarized adaptor plug must be used
„BEFORE RETURNING THE RECEIVER only for the purpose of completing these checks.)
(Fire & Shock Hazard) Any reading of 0.74 Vrms (this corresponds to 0.5 mA rms AC.) or
more is excessive and indicates a potential shock hazard which
Before returning the receiver to the user, perform the following must be corrected before returning the monitor to the owner.
safety checks:
3. Inspect all lead dress to make certain that leads are not pinched,
and check that hardware is not lodged between the chassis and
other metal parts in the receiver.
DVM
4. Inspect all protective devices such as non-metallic control knobs, AC SCALE
insulation materials, cabinet backs, adjustment and compartment
covers or shields, isolation resistor-capacitor networks, mechanical
1.5k ohm
insulators, etc. 10W
5. To be sure that no shock hazard exists, check for leakage current in
the following manner.
• Plug the AC cord directly into a 110 ~ 240 volt AC outlet.
• Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral- 0.15 µF
leled by a 0.15µF capacitor in series with all exposed metal cabinet TEST PROBE
parts and a known earth ground, such as electrical conduit or elec-
trical ground connected to an earth ground.
• Use an AC voltmeter having with 5000 ohm per volt, or higher, sen-
sitivity or measure the AC voltage drop across the resistor.
TO EXPOSED CONNECT TO
METAL PARTS KNOWN EARTH
GROUND

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have
special safety-related characteristics.
These characteristics are often not evident from visual inspection, nor
can protection afforded by them be necessarily increased by using
replacement components rated for higher voltage, wattage, etc.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts
Lists and Schematic Diagrams.
For continued protection, replacement parts must be identical to those
used in the original circuit.
The use of a substitute replacement parts which do not have the same
safety characteristics as the factory recommended replacement parts
shown in this service manual, may create shock, fire or other hazards.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

v
LC-32PX5M/X/LC-37PX5M/X
Precautions for using lead-free solder

„Employing lead-free solder


• “All PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals.
The alphabetical character following LF shows the type of lead-free solder.
Example:

LFa L F a/a
Indicates lead-free solder of tin, silver and copper. Indicates lead-free solder of tin, silver and copper.

„Using lead-free wire solder


• When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause dam-
age or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 °C, we recommend you to use a dedicated soldering
bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.

„Soldering
• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be
peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the
steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as
required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.

• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing

Part No. Description Code


ZHNDAi123250E J φ0.3mm 250g (1roll) BL
ZHNDAi126500E J φ0.6mm 500g (1roll) BK
ZHNDAi12801KE J φ1.0mm 1kg (1roll) BM

vi
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 1. SPECIFICATIONS
LC-37PX5M
Service Manual

[1] SPECIFICATIONS

Model
LC-32PX5M/X LC-37PX5M/X
Item
LCD panel 32 (80 cm) Advanced 37 (94 cm) Advanced
Super View & BLACK TFT Super View & BLACK TFT
LCD LCD
Number of dots 3,147,264 dots (1366 768 3 dots)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
Function
Receiving VHF/UHF 44.25—863.25 MHz
Channel
CATV S1—S41ch (including Hyperband)
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Brightness 450 cd/m 2
Viewing angles H : 176º V : 176º
10W 2
Speakers 10 4 cm 2pcs, Ø 2 cm 2pcs

Terminals Rear ANTENNA IN UHF/VHF 75 DIN type


INPUT 1 VIDEO in, AUDIO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT 2 VIDEO in, AUDIO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT 3 HDMI (HDMI input) (480P, 576P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz), AUDIO in
INPUT 4 HDMI (HDMI input) (480P, 576P, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
PC INPUT 15 pin mini D-sub, AUDIO in (Ø 3.5mm jack)
MONITOR OUTPUT VIDEO out, AUDIO out
RS-232C 9 pin D-sub male connector
OSD language English/Chinese/Arabic
Power Requirement AC 110—240 V, 50/60 Hz
Power Consumption 158 W (0.8 W Standby) 171 W (0.8 W Standby)
without stand 16.5 kg 20.3 kg
Weight
with stand 18.4 kg 22.9 kg
Operating Temperature 0°C — 40°C

units. There may be some deviations from these values in individual units.

1–1
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 2. OPERATION MANUAL
LC-37PX5M
Service Manual

[1] OPERATION MANUAL

Part names
TV (Front)
Channel up ( )/down ( ) buttons TV/VIDEO button

Volume up ( )/down ( ) buttons POWER (On/Off) button

Remote control sensor OPC indicator*

OPC sensor SLEEP timer indicator

POWER indicator *OPC: Optical Picture Control

2–1
LC-32PX5M/X/LC-37PX5M/X

Part names

TV (Rear)

RS-232C terminal

PC INPUT terminals

INPUT 4 (HDMI) terminal

INPUT 3 (HDMI) terminals

INPUT 1 terminals

INPUT 2 terminals

MONITOR OUTPUT
terminals

Antenna input terminal AC INPUT terminal

2–2
LC-32PX5M/X/LC-37PX5M/X

Part names

Remote control unit

(TELETEXT) (Reveal hidden for


Select the TELETEXT mode. (all TV TELETEXT)
image, all TEXT image, TV/TEXT TELETEXT mode: Display hidden
image) characters.
POWER (STANDBY/ON) (SUBTITLE for TELETEXT)
To switch the power on and off. To turn the subtitles on and off.

(Hold) (Top/Bottom/Full)
TELETEXT mode: Stop updating TELETEXT mode: Set the area of
Teletext pages automatically. Press
again to release the hold mode.

0—9 (Subpage)
Set the channel. Display the Teletext subpage directly.
TELETEXT mode: Set the page.
TV/VIDEO (INPUT SOURCE)
(Flashback) Select an input source. (TV, INPUT 1,
Press to return to the previous channel INPUT 2, INPUT 3, INPUT 4, PC)
or external input mode.

WIDE OPC
Change the wide image mode. To switch Optical Picture Control on
and off.

AV MODE
Select a video setting: AV MODE FREEZE
(STANDARD, MOVIE, GAME, USER, Freeze a motion picture on the screen.
DYNAMIC, DYNAMIC (FIXED)), PC MODE
(STANDARD, USER)
DISPLAY
MPX Display the channel and input source.
Select the sound multiplex mode.

VOL /VOL CH /CH


Set the volume. TV input mode: Select the channel.
TELETEXT mode: Select the page.

(Mute)
Mute the sound. SLEEP
Set the Sleep timer.

P&P SELECT
Set the dual picture mode. Press P&P To select either screen to be active in
again to return to normal view. Dual screen mode.

SURROUND MENU
Select Surround settings. Display the menu screen.

/ / / (Cursor) ENTER
Select a desired item on the setting Execute a command.
screen.

EXIT RETURN
Return to the default screen. MENU mode: Return to the previous
menu screen.

Colour (Red/Green/Yellow/
Blue)
TELETEXT mode: Select a page.

NOTE
• When using the remote control unit, point it at the TV.

2–3
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 3. DIMENSIONS
LC-37PX5M
Service Manual

[1] DIMENSIONS

LC-32PX5M/X, LC-37PX5M/X Unit: mm

NOTE
• Figures within parentheses are for LC-37PX5M/X.

506 (542)

797 (920) 100 (84) 116 (116)

700.4 (823)
533 (600)

395.1 (464)
590.5 (657)

343 (377)
57.5 (57)

250 (292)

200 (200)
85 (85)
200 (200)

3–1
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 4. REMOVING OF MAJOR PARTS
LC-37PX5M
Service Manual

[1] REMOVING OF MAJOR PARTS


1. Detach the 2 BUS Covers [1].
2. Remove the 4 screws [2] and detach the Stand.
3. Remove the 1 screw [3], 4 (32PX5M/X)/6 (37PX5M/X) screws [4] and the 9 (32PX5M/X)/10 (37PX5M/X) screws [5].
Detach the Rear Cabinet.

(LC-32PX5M/X)
5

1
BUS Cover

Stand

(LC-37PX5M/X)
5

1
BUS Cover

Stand

4–1
LC-32PX5M/X/LC-37PX5M/X
4. Remove the 4 screws [6] and detach the Support Angle.
5. Remove the 3 screws [7] and the Bottom Cover.
6. Remove the 2 (32PX5M/X)/4 (37PX5M/X) screws [8] and detach the Stand Angle.
7. Remove the 6 (32PX5M/X)/4 (37PX5M/X) screws [9].
Detach the SUS Angle-L and SUS Angle-R.
8. Remove the 2 screws [10] and detach the Top Control Cover Ass'y.
Remove the 2 screws [11] , 1 screw [11A] and detach the OPERATION PWB Unit from Top Control Cover Ass'y.

(LC-32PX5M/X) 9

Center Angle-R Center Angle-L

6 Support Angle

9
10

Top Control
Cover Ass'y
䬌䎮䎰䬍

OPERATION 11A 䎥
PWB Unit
11

䬌䎮䎰䬍


Bottom Cover
Stand Angle

8
7

4–2
LC-32PX5M/X/LC-37PX5M/X

(LC-37PX5M/X) 9

Center Angle-R Center Angle-L

6 Support Angle

10 9
Top Control
Cover Ass'y
䬌䎮䎰䬍 䎤
OPERATION 11A 䎥
PWB Unit
11

䬌䎮䎰䬍


Bottom Cover
Stand Angle

8
7

4–3
LC-32PX5M/X/LC-37PX5M/X
9. Remove all the connectors [12] from all the PWBs.

(LC-32PX5M/X)

䬌䎶䎫䬍
䬌䎮䎰䬍 䬌䎯䎹䬍 䬌䎯䎹䬍䬌䎶䎫䬍

䬌䎦䎱䎔䬍
䬌䎵䎤䬍 䬌䎦䎱䎕䬍
䬌䎳䎧䬍
12 䬌䎦䎱䎖䬍
䬌䎳䎨䬍
䬌䎶䎳䬍
12

12

䬌䎵䎤䬍

(LC-37PX5M/X)

䬌䎶䎫䬍
䬌䎮䎰䬍 䬌䎯䎹䬍 䬌䎯䎹䬍䬌䎶䎫䬍

䬌䎦䎱䎔䬍
䬌䎵䎤䬍 䬌䎦䎱䎕䬍
䬌䎳䎧䬍 䬌䎦䎱䎖䬍
12 䬌䎳䎨䬍
䬌䎶䎳䬍 12

12

䬌䎵䎤䬍

4–4
LC-32PX5M/X/LC-37PX5M/X
10.Remove the 2 (32PX5M/X)/4 (37PX5M/X) screws [13]. Detach the Speaker Box L and Speaker Box R.
11.Remove the 5 (32PX5M/X)/4 (37PX5M/X) screws [14] and detach Chassis Tray.
12.Remove the 2 screws [16] and 2 screws [17].
Detach the AV Terminal Cover.
13.Remove the 8 screws [18] and detach the POWER PWB Unit from Chassis Tray.
14.Remove the 6 screws [19] and detach the SUB PWB Unit from Chassis Tray.
15.Remove the 3 screws [20] and detach the MAIN PWB Unit from SUB PWB Unit.

(LC-32PX5M/X)
20

19
MAIN PWB Unit

SUB PWB Unit 18

14
14

17

16 POWER PWB Unit

Chassis Tray

AV Terminal Cover

14

Speaker Box R Speaker Box L


13 13

4–5
LC-32PX5M/X/LC-37PX5M/X

(LC-37PX5M/X)
20

19
MAIN PWB Unit

SUB PWB Unit 18

14
14

17

16 POWER PWB Unit

Chassis Tray

AV Terminal Cover

Speaker Box R
13 Speaker Box L
13

4–6
LC-32PX5M/X/LC-37PX5M/X
16.Remove the 7 (32PX5M/X)/6 (37PX5M/X) screws [21] and take out the LCD Panel from Front Cabinet.
17.Remove the 9 (32PX5M/X)/14 (37PX5M/X) screws [22] and detach the LCD Angles.
18.Remove the 2 screws [24] and detach the LED, R/C PWB Unit.

(LC-32PX5M/X)

21 21
LCD Angle Top R
22 22
LCD Angle Top L

24
LED, R/C
PWB Unit

LED Cover

LCD Angle LCD Angle


Bottom R Bottom R
LCD Angle
Bottom C
22
22 22
21 21 21

4–7
LC-32PX5M/X/LC-37PX5M/X

(LC-37PX5M/X)

21 22 21
22 22
LCD Angle
Top C

LCD Angle Top R LCD Angle Top L

24
LED, R/C
PWB Unit

LED Cover

LCD Angle LCD Angle


Bottom L Bottom R
LCD Angle
Bottom C 22
22 22
21 21

4–8
LC-32PX5M/X/LC-37PX5M/X

-MEMO-

4–9
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 5. BLOCK DIAGRAM/OVERALL
LC-37PX5M
WIRING
Service DIAGRAM
Manual

[1] BLOCK DIAGRAM


㪇㪈㪇㪇㪄 㪧㪈㪇㪈
㪣㪜㪛 㪨㪧㪣㪞㪥㪘㪊㪊㪌㪮㪡㪱㪱㪰
㪫㪦㩷㪪㪬㪙 㪦㪧㪚 㪠㪩㩷㪩㪼㪺㫀㪼㫍㪼㫉 㪈㪌㫇㫀㫅
㪠㪚㪈㪇㪈 㪩㪤㪚㪈㪇㪈 㪧
㪨㪧㪣㪞㪥㪘㪊㪋㪐㪮㪡㪱㪱㪰
J 㪣㪚㪊㪉㪆㪊㪎㪧㪯㪌㩷㪙㫃㫆㪺㫂㩷㪛㫀㪸㪾㫃㪸㫄 㪣㪜㪛
㪛㪈㪇㪊㪆㪈㪈㪋㪆㪈㪈㪌
㪙㪬㪂㪌㪭㪃㪙㪬㪂㪊㪅㪊㪭㪃㪦㪧㪚㪂㪊㪅㪊㪭㪃㪩㪆㪚㪃㪧㪦㪮㪞㪶㪣㪜㪛㪃㪧㪦㪮㪩㪶㪣㪜㪛㪃㪣㪜㪛㪶㪰㪦㪰㪘㪢㪬㪃㪣㪜㪛㪶㪦㪧㪚㪃㪦㪧㪚㪃㪟㪧㪶㪣㪃㪟㪧㪶㪩㪃㪟㪧㪶㪧㪣㪬㪞㪃㪟㪧㪶㪞㪥㪛

㪇㪈㪎㪈㪄
㪦㪧㪜㪩㪘㪫㪠㪦㪥 㪧㪈㪎㪈
㪫㪦㩷㪪㪬㪙 㪨㪧㪣㪞㪥㪘㪇㪌㪐㪮㪡㪱㪱㪰
㪚㪦㪥㪫㪩㪦㪣㩷㪪㪮 㪧㪦㪮㩷㪪㪮 㪌㫇㫀㫅
㪪㪈㪎㪈㪄㪪㪈㪎㪌 㪪㪈㪎㪎 㪧
㪨㪧㪣㪞㪥㪘㪊㪉㪌㪮㪡㪱㪱㪰
I 㪙㪬㪂㪊㪅㪊㪭㪃㪢㪜㪰㪈㪃㪢㪜㪰㪉㪃㪪㪫㪙㪰㪶㪧㪦㪮

㪩㪪㪄㪉㪊㪉㪚
㪪㪬㪙 㪨㪪㪦㪚㪥㪇㪋㪊㪏㪝㪡㪱㪱
㪩㫏㪃㪫㫏
㪠㪥㪧㪬㪫㪈㩷㪭㪠㪛㪜㪦㩷㪠㪥 㪭㪉㪶㪭
㪡㪊㪋㪇㪉 㪠㪥㪧㪬㪫㪈㪶㪚㪭㪙㪪
㪡㪊㪋㪇㪍 㪠㪥㪧㪬㪫㪈㪆㪉㩷㪭㪠㪛㪜㪦㪃㪠㪥㪧㪬㪫㪈㪆㪉㩷㪰㩷㪻㪼㫋㪼㪺㫋
H
㪭㪊㪶㪭 㪘㪚㪶㪛㪜㪫㪜㪚㪫
㪠㪥㪧㪬㪫㪉㩷㪭㪠㪛㪜㪦㩷㪠㪥
㪠㪥㪧㪬㪫㪉㪶㪚㪭㪙㪪 㪠㪚㪉㪇㪈㪇
㪡㪊㪋㪇㪉
㪘㪭㩷㪪㪮
㪠㪚
㩷 㪭㪟㪠㪤㪤㪈㪋㪐㪉㪙㪝㪄㪈㪰
㪌㩷㫀㫅㫇㫌㫋㩷㪄㪉㩷㫆㫌㫋㫇㫌㫋 㪦㪧㪚
㪍㪻㪙㩷㪘㪤㪧 㪉㪭㫇㫇㩷㪦㪬㪫㪧㪬㪫㪄㪫㪜㪩㪤㪠㪥㪘㪫㪠㪦㪥
㪭㪦㪬㪫㪈 㪚㪭㪙㪪 㪠㪩㪜㪤

㪤㪚
G 㪪㪧㪶㪤㪬㪫㪜
㪠㪚㪉㪇
㪤㪫㪭㪶㪭 㪉㪭㫇㫇㩷㪦㪬㪫㪧㪬㪫㪄㪫㪜㪩㪤㪠㪥㪘㪫㪠㪦㪥
㪫㪬㪥㪜㪩㪶㪚㪭㪙㪪 㪪㪫㪭㪶㪭 㪭㪦㪬㪫㪉
㪫㪬㪥㪜㪩㩷㪭㩷㪦㪬㪫 㪉㪭㫇㫇㩷㪦㪬㪫㪧㪬㪫㪄㪫㪜㪩㪤㪠㪥㪘㪫㪠㪦㪥
㪫㪬㪊㪋㪇㪈 㪘㪚㪶㪚㪫㪩㪣㪃㪧㪦㪮
㪭㪫㪉㪮㪌㪚㪛㪌㪌㪈 㪪㪚㪣㪃㪪㪛㪘㩿㪌㪭㪀

㪘㪝㪫㪃㪘㪞㪚

㪤㪦㪥㪠㪫㪦㪩㩷㪭㩷㪦㪬㪫 㪚㪭㪙㪪㩿㪪㪚㩷㪤㪠㪯㪀 㪪㪟㪦


F
㪠㪥㪧㪬㪫㪈 㪚㪦㪤㪧㪦㪥㪜㪥㪫㩷㪪㪮
㪚㪦㪤㪧㪦㪥㪜㪥㪫㩷㪠㪥 㪠㪥㪧㪬㪫㪈㪶㪰㪃㪧㪹㪃㪧㫉 㪭㪟㪠㪪㪤㪌㪊㪇㪈㪚㪪㪄㪈㪰 㪰㪃㪧㪹㪃㪧㫉
㪡㪊㪋㪇㪋
㪚㪦㪤㪧㪦㪥㪜㪥㪫㩷㪪㪮
㪠㪥㪧㪬㪫㪉 㪭㪟㪠㪪㪤㪌㪊㪇㪈㪚㪪㪄㪈㪰 㪰㪃㪧㪹㪃㪧㫉
㪚㪦㪤㪧㪦㪥㪜㪥㪫㩷㪠㪥 㪠㪥㪧㪬㪫㪉㪶㪰㪃㪧㪹㪃㪧㫉
㪡㪊㪋㪇㪋
㪛㪶㪪㪜㪣
㪝㪶㪪㪜㪣㪈㪆㪉
E
㪠㪥㪧㪬㪫㪈㩷㪘㪬㪛㪠㪦㩷㪠㪥 㪭㪉㪶㪣㪆㪩
㪡㪊㪋㪇㪉 㪠㪥㪧㪬㪫㪈㩷㪣㪆㪩
㪪㪧㪶㪣㪆㪩 㪩㪆㪣㪂㪄
㪘㫌㪻㫀㫆㩷㪘㪤㪧
㪠㪥㪧㪬㪫㪉㩷㪘㪬㪛㪠㪦㩷㪠㪥 㪭㪊㪶㪣㪆㪩
㪡㪊㪋㪇㪉 㪠㪥㪧㪬㪫㪉㩷㪣㪆㪩
㪘㪭㩷㪪㪮
㪘㫌㪻㫀㫆
㪠㪥㪧㪬㪫㪊㩷㪘㪬㪛㪠㪦㩷㪠㪥 㪤㪫㪭㪶㪣㪆㪩 㪠㪚
㪭㫆㫃㫌㫄㪼㪆㪜㪨㪆㪟㪧
㪡㪊㪋㪇㪌 㪠㪥㪧㪬㪫㪊㩷㪣㪆㪩 㪭㪟㪠㪤㪤㪈㪋㪐㪉㪙㪝㪄㪈㪰 㪣㪆㪩 㪘㪤㪧㪆㪪㫌㫉㫉㫆㫌㫅㪻
㪧㪚㩷㪘㪬㪛㪠㪦㩷㪠㪥 㪪㪫㪭㪶㪣㪆㪩
D 㪡㪊㪋㪇㪍 㪧㪚㩷㪣㪆㪩
㩿㪠㪉㪪㪀
㩿㪪㪶㪠㪝㪀

㪫㪬㪥㪜㪩㩷㪪㪄㪠㪝㩷㪦㪬㪫 㪪㪠㪝㵘㪘㪤㪧
㪫㪬㪊㪋㪇㪈 㪪㪶㪠㪝 㪨

C 㪤㪦㪥㪠㪫㪦㪩㩷㪣㪆㪩㩷㪦㪬㪫

㪣㪶㪤㪬㪫㪜
㪘㪬㪛㪠㪦㩷㪘㪤㪧
㪪㪶㪪㪫㪙㪰㪃㪣㪶㪤㪬㪫㪜㪉

㪪㪧㪶㪣㪆㪩
㪠㪥㪭㪜㪩㪫㪜㪩 㪪㪧
㪠㪥㪭㪜㪩㪫㪜㪩
B 㪚㪦㪥㪥㪜㪚㪫㪜㪩
㪣㪚㪛㩷㪤㪦㪛㪬㪣㪜 㪫㪦㩷㪤㪘㪠㪥

1 2 3 4 5 6 7 8 9 10

5–1
LC-32PX5M/X/LC-37PX5M/X

㪤㪘㪠㪥 㪧㪚㩷㪠㪥
㪪㪚㪋㪇㪈
㪧㪚㪶㪟㪃㪧㪚㪶㪭 㪨㪪㪦㪚㪥㪘㪈㪇㪈㪮㪡㪱㪱㩷㩿㪛㪊㪇㪀
㪧㪚㪶㪩㪆㪞㪆㪙 㪨㪪㪦㪚㪥㪘㪌㪉㪐㪮㪡㪱㪱

㪪㪛㪘㪃㪪㪚㪣

㪜㪜㪧㪩㪦㪤
㪠㪚㪋㪇㪈

㪟㪧㪛㪚㪫㪣㪈㪆㪉 㪠㪥㪧㪬㪫㪊㪆㪋
㪟㪧㪛㪈㪆㪉 㪟㪛㪤㪠㩷㪠㪥㩷㪈㪆㪉
㪪㪚㪋㪇㪉

㪩㪆㪞㪆㪙

㪪㪛㪘
㪪㪚㪣 㪜㪜㪧㪩㪦㪤
㪠㪚㪋㪇㪊

㪪㪿㫄㫀㫋㫋㩷㫋㫉㫀㪾㪼㫉
㪠㪚㪋㪇㪉 㪪㪛㪘㪃㪪㪚㪣
㪩㪩㪈㪯㪚㪆㪇㪆㪈㪆㪉㪄㪆㪂
㪉㪎㪤㪟䌺㩷㪚㫉㫐㫊㫋㪸㫃
㪘㪚㪶㪛㪜㪫㪜㪚㪫
㪠㪚㪉㪇㪈㪈 㪛㪭㪧㪶㪊㪊㪚㪫㪩㪣 㪦㪝㪣㪶㪧㪮㪤 㪜㪜㪧㪩㪦㪤
㪊㪅㪊㪭 㪊㪅㪊㪭
㪈㪅㪌㪭 㪉㪅㪌㪭
㪩㪜㪪㪜㪫 㪟㪃㪭
㪦㪧㪚 㪠㪚㪉㪇㪇㪍
㪠㪉㪪
㪩㪜㪤 㪟㪛㪤㪠㩷㪩㪼㪺㫀㪼㫍㪼㫉
㪜㪜㪧㪩㪦㪤 㪤㪪㪫㪊㪊㪏㪍
㪠㪚㪉㪇㪇㪐 㪠㪚㪏㪎㪇㪈
㪤㪚㪬
㪊㪅㪊㪭㩷㪉㪊㪌㫄㪘
㪠㪚㪉㪇㪇㪈
㪏㪹㫀㫋 㪏㪹㫀㫋 㪉㪅㪌㪭㩷㪈㪈㪏㫄㪘
㪪㪛㪘㪃㪪㪚㪣
㪫㪟㪜㪩㪤㪠㪪㪫㪦㪩 㪛㪭㪧㪄㪤㪉
㪫㪟㪉㪇㪇㪈 㪠㪥㪭㪶㪧㪦㪮㪃㪦㪝㪣㪶㪛㪘㪚 㪠㪚㪏㪇㪈 㪉㪎㪤㪟䌺㩷㪚㫉㫐㫊㫋㪸㫃
㪫㪦㩷㪠㪥㪭㪜㪩㪫㪜㪩 㫧㪊㪇㫇㫇㫄 㪛㪭㪧㪄㪯
㪧㪦㪮 㪊㪅㪊㪭 㪠㪚㪏㪇㪈
㪬㪘㪩㪫 㪈㪅㪌㪭

㪰㪃㪧㪹㪃㪧㪩
㪈㪋㪅㪊㪈㪏㪤㪟䌺㩷㪚㫉㫐㫊㫋㪸㫃
㪟㪛㪚㪧 㫧㪊㪇㫇㫇㫄
㪪㪟㪦㪩㪫㪶㪛㪜㪫 㪚㪭㪙㪪 㪜㪜㪧㪩㪦㪤
㪪㪶㪠㪝 㪠㪚㪏㪎㪇㪋

㪂㪄

㪣㪆㪩

㪬㪶㪛㪃㪣㪶㪩
㪚㪣㪢㪠㪥㪄㪆㪂㪃㪩㪠㪥㪈㪆㪉㪆㪊㪄㪆㪂

㪣㪭㪛㪪
㪚㪦㪥㪥㪜㪚㪫㪜㪩 㪨㪪㵘㪚㪦㪥㪥㪜㪚㪫㪜㪩

㪣㪚㪛㩷㪤㪦㪛㪬㪣㪜
㪣㪚㪛

10 11 12 13 14 15 16 17 18 19

5–2
LC-32PX5M/X/LC-37PX5M/X
[2] OVERALL WIRING DIAGRAM (LC-32PX5M/X)

1 2 3 4 5 6 7 8 9 10

5–3
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

5–4
LC-32PX5M/X/LC-37PX5M/X
[3] OVERALL WIRING DIAGRAM (LC-37PX5M/X)

1 2 3 4 5 6 7 8 9 10

5–5
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

5–6
LC-32PX5M/X/LC-37PX5M/X

-MEMO-

5–7
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 6. SCHEMATIC DIAGRAM
LC-37PX5M
Service Manual

[1] DESCRIPTION OF SCHEMATIC DIA-


GRAM
VOLTAGE MEASUREMENT CONDITION:
1. The voltages at test points are measured on exclusive AC adaptor
and the stable supply voltage of AC 110-240V.
Signals are fed by a colour bar signal generator for servicing pur-
pose and the above voltages are measured with a 20k ohm/V
tester.

INDICATION OF RESISTOR & CAPACITOR:


RESISTOR
1. The unit of resistance “Ω” is omitted.
(K=kΩ=1000 Ω, M=MΩ).
2. All resistors are ± 5%, unless otherwise noted.
(K= ± 10%, F= ± 1%, D= ± 0.5%)
3. All resistors are 1/16W, unless otherwise noted.
CAPACITOR
1. All capacitors are µF, unless otherwise noted.
(P=pF=µµF).
2. All capacitors are 50V, unless otherwise noted.

CAUTION:
This circuit diagram is original one, therefore there may be a
slight difference from yours.

SAFETY NOTES:
1. DISCONNECT THE AC PLUG FROM THE AC
OUTLET BEFORE REPLACING PARTS.
2. SEMICONDUCTOR HEAT SINKS SHOULD BE
REGARDED AS POTENTIAL SHOCK HAZARDS
WHEN THE CHASSIS IS OPERATING.

IMPORTANT SAFETY NOTICE:


PARTS MARKED WITH “ ”( ) ARE
IMPORTANT FOR MAINTAINING THE SAFETY OF THE
SET. BE SURE TO REPLACE THESE PARTS WITH
SPECIFIED ONES FOR MAINTAINING THE SAFETY AND
PERFORMANCE OF THE SET.

6–1
LC-32PX5M/X/LC-37PX5M/X
[2] SCHEMATIC DIAGRAM
1. LED, R/C Unit (LC-32PX5M/X, LC-37PX5M/X)

1 2 3 4 5 6 7 8 9 10

6–2
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6–3
LC-32PX5M/X/LC-37PX5M/X
2. OPERATION Unit (LC-32PX5M/X, LC-37PX5M/X)

1 2 3 4 5 6 7 8 9 10

6–4
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6–5
LC-32PX5M/X/LC-37PX5M/X
3. SUB Unit-1 (LC-32PX5M/X, LC-37PX5M/X)

(1/8) (1/8) Please peel off and refer to page 6-8. (2/8) (2/8) Please peel off and refer to page 6-9.

(5/8) (5/8) Please peel off and refer to page 6-12. (6/8) (6/8) Please peel off and refer to page 6-13.

6–6
LC-32PX5M/X/LC-37PX5M/X

(3/8) (3/8) Please peel off and refer to page 6-10. (4/8) (4/8) Please peel off and refer to page 6-11.

(7/8) (7/8) Please peel off and refer to page 6-14. (8/8) (8/8) Please peel off and refer to page 6-15.

6–7
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6–8
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6–9
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 10
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 11
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 12
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 13
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 14
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 15
LC-32PX5M/X/LC-37PX5M/X
4. SUB Unit-2 (LC-32PX5M/X, LC-37PX5M/X)

1 2 3 4 5 6 7 8 9 10

6 – 16
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 17
LC-32PX5M/X/LC-37PX5M/X
5. SUB Unit-3 (LC-32PX5M/X, LC-37PX5M/X)

(1/8) (1/8) Please peel off and refer to page 6-20. (2/8) (2/8) Please peel off and refer to page 6-21.

(5/8) (5/8) Please peel off and refer to page 6-24. (6/8) (6/8) Please peel off and refer to page 6-25.

6 – 18
LC-32PX5M/X/LC-37PX5M/X

(3/8) (3/8) Please peel off and refer to page 6-22. (4/8) (4/8) Please peel off and refer to page 6-23.

(7/8) (7/8) Please peel off and refer to page 6-26. (8/8) (8/8) Please peel off and refer to page 6-27.

6 – 19
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 20
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 21
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 22
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 23
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 24
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 25
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 26
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 27
LC-32PX5M/X/LC-37PX5M/X
6. SUB Unit-5 (LC-32PX5M/X, LC-37PX5M/X)

(1/8) (1/8) Please peel off and refer to page 6-30. (2/8) (2/8) Please peel off and refer to page 6-31.

(5/8) (5/8) Please peel off and refer to page 6-34. (6/8) (6/8) Please peel off and refer to page 6-35.

6 – 28
LC-32PX5M/X/LC-37PX5M/X

(3/8) (3/8) Please peel off and refer to page 6-32. (4/8) (4/8) Please peel off and refer to page 6-33.

(7/8) (7/8) Please peel off and refer to page 6-36. (8/8) (8/8) Please peel off and refer to page 6-37.

6 – 29
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 30
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 31
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 32
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 33
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 34
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 35
LC-32PX5M/X/LC-37PX5M/X

1 2 3 4 5 6 7 8 9 10

6 – 36
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 37
LC-32PX5M/X/LC-37PX5M/X
7. SUB Unit-6 (LC-32PX5M/X, LC-37PX5M/X)

1 2 3 4 5 6 7 8 9 10

6 – 38
LC-32PX5M/X/LC-37PX5M/X

10 11 12 13 14 15 16 17 18 19

6 – 39
LC-32PX5M/X/LC-37PX5M/X
CHAPTER 7. PRINTED WIRING BOARD
LC-37PX5M
Service Manual

[1] OPERATION UNIT PRINTED WIRING BOARD

OPERATION Unit (Side-A)


G

C
OPERATION Unit (Side-B)

1 2 3 4 5 6 7 8 9 10

7–1
LC-32PX5M/X/LC-37PX5M/X
[2] LED, R/C UNIT PRINTED WIRING BOARD

LED, R/C Unit (Side-A)

R108
R126

R101

R124 Q107
C107 R117 R122
C102
Q102
Q104
C105
R136

RMC101
Q110

P101 D103 D114 D115


IC101
R109

R107
F SLD101 R127 R135
R110 R105

R121
R106 R104
Q105

Q106
D101
Q103

C104
R123
R129
R128

R131
R130

R132 C106 3

LED, R/C Unit (Chip Parts Side-A)


E

LED, R/C Unit (Side-B)


A

1 2 3 4 5 6 7 8 9 10

7–2
LC-32PX5M/X/LC-37PX5M/X

-MEMO-

7–3
PartsGuide
LC-32PX5M/X/LC-37PX5M/X

PARTS GUIDE
No. S17B1LC37PX5M

LCD COLOR TELEVISION

LC-32PX5M/X
MODELS LC-37PX5M/X

CONTENTS

[1] PRINTED WIRING BOARD [4] CABINET PARTS (LC-32PX5M/X)


ASSEMBLIES (NOT
REPLACEMENT ITEM) [5] CABINET PARTS (LC-37PX5M/X)

[2] DUNTKD893FM50 (LC-32PX5M) / [6] SUPPLIED ACCESSORIES


DUNTKD893FM51 (LC-32PX5X) /
DUNTKD893FM52 (LC-37PX5M) / [7] PACKING PARTS (NOT
DUNTKD893FM53 (LC-37PX5X) REPLACEMENT ITEM)
(SUB Unit)
[8] SERVICE JIG
[3] DUNTKE097FM02 (LC-32PX5M/X) /
DUNTKE097FM04 (LC-37PX5M/X)
(OPERATION Unit)

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used


for after sales service only.
The contents are subject to change without notice.
LC-32PX5M/X/LC-37PX5M/X
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELYVERY

[1] PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACEMENT ITEM)


N DUNTKE097FM02 AN N V OPERATION Unit (LC-32PX5M)
N DUNTKD892FM50 BV N V MAIN Unit (LC-32PX5M)
N DUNTKD893FM50 BT N V SUB Unit (LC-32PX5M)
N DUNTKE095FM02 AQ N V LED, R/C Unit (LC-32PX5M)
N RDENCA182WJQZ BS V POWER Unit exchange (LC-32PX5M)
N DUNTKE097FM02 AN N V OPERATION Unit (LC-32PX5X)
N DUNTKD892FM51 BV N V MAIN Unit (LC-32PX5X)
N DUNTKD893FM51 BT N V SUB Unit (LC-32PX5X)
N DUNTKE095FM02 AQ N V LED, R/C Unit (LC-32PX5X)
N RDENCA182WJQZ BS V POWER Unit exchange (LC-32PX5X)
N DUNTKE097FM04 AN N V OPERATION Unit (LC-37PX5M)
N DUNTKD892FM52 BV N V MAIN Unit (LC-37PX5M)
N DUNTKD893FM52 BT N V SUB Unit (LC-37PX5M)
N DUNTKD897FM53 AQ N V LED, R/C Unit (LC-37PX5M)
N RDENCA182WJQZ BS V POWER Unit exchange (LC-37PX5M)
N DUNTKE097FM04 AN N V OPERATION Unit (LC-37PX5X)
N DUNTKD892FM53 BV N V MAIN Unit (LC-37PX5X)
N DUNTKD893FM53 BT N V SUB Unit (LC-37PX5X)
N DUNTKD897FM53 AQ N V LED, R/C Unit (LC-37PX5X)
N RDENCA182WJQZ BS V POWER Unit exchange (LC-37PX5X)
[2] DUNTKD893FM50 (LC-32PX5M) / DUNTKD893FM51 (LC-32PX5X) / DUNTKD893FM52 (LC-37PX5M) /
DUNTKD893FM53 (LC-37PX5X) (SUB Unit)
IC2001 RH-IXA650WJZZQ AT N V IC M30626FHPFPU5C
P2002 QPLGN0581FJZZY AF J Plug 22pin
R1912 VRS-CJ1JF000JY AA J Resistor 0 1/16W Metal Oxide
R2051 VRS-CY1JF102JY AA J Resistor 1k 1/16W Metal Oxide
R2078 VRS-CY1JF000JY AA J Resistor 0 1/16W Metal Oxide
[3] DUNTKE097FM02 (LC-32PX5M/X) / DUNTKE097FM04 (LC-37PX5M/X) (OPERATION Unit)
D171 RH-EX0641GEZZY AA J Zener Diode MTZJT-7212C
D172 RH-EX0641GEZZY AA J Zener Diode MTZJT-7212C
D173 RH-EX0641GEZZY AA J Zener Diode MTZJT-7212C
P171 QPLGNA059WJZZ AC N J Plug
R171 VRD-RA2BE822JY AA J Resistor 8.2k 1/8W Carbon
R172 VRD-RA2BE123JY AA J Resistor 12k 1/8W Carbon
R173 VRD-RA2BE822JY AA J Resistor 8.2k 1/8W Carbon
R175 VRD-RA2BE103JY AA J Resistor 10k 1/8W Carbon
R176 VRD-RA2BE101JY AA J Resistor 100 1/8W Carbon
S171 QSW-K0003AJZZ+ AB J Switch
S172 QSW-K0003AJZZ+ AB J Switch
S173 QSW-K0003AJZZ+ AB J Switch
S174 QSW-K0003AJZZ+ AB J Switch
S175 QSW-K0003AJZZ+ AB J Switch
S177 QSW-P0035GEZZ AF J Switch

2
LC-32PX5M/X/LC-37PX5M/X
[4] CABINET PARTS (LC-32PX5M/X)

42
13 47

45 47
3-1
19
3
3-5 42 42
3-2 27 19 47
3-3 42
3-4 47
36 47
8
48
46
14 42

44 䎴
38
25 䎪 13
䎤 34
1
1-8 47 12
䎧 25 40
41
1-1 45 41
1-7 䎧

1-10 33 39 2-1
1-5 1-11
1-6 䎫 䎤
䎧 44 2-7
1-7 1-8
䎧 2-3
1-2 1-10 1-10 2-5
7 2 2-6
1-10 1-11

1-10 1-10 2-9
1-4 42
1-9 2-2
17 42
2-4
18 2-8
1-3 䎦 42
26 2-4
42 䎤 2-3
26 16
42 42 2-5
37 䎮 䎲
31 䎳 䎥
䎩 42
29 䎥 42
28 䎱 20
35
42 42 11
䎰 32 47
28 䎨

42 䎫
5 X10
15 42
30 䎰
23
䎮 22 䎱 10
X8
23 䎪 42 43
䎦 6 10
24 S4

䎳 45
9
21 X7

䎨 X9

3
LC-32PX5M/X/LC-37PX5M/X

NO. PARTS CODE PRICE NEW PART DESCRIPTION


RANK MARK DELIVERY

[4] CABINET PARTS (LC-32PX5M/X)


1 CCABAB613WJ03 BR S V Front Cabinet Ass'y
1-1 Not Available - - Front Cabinet
1-2 GCOVAC066WJ4A N V Front Cover
1-3 Not Available - - Badge, "SHARP"
1-4 HDECQA684WJSA V Decoration Cover
1-5 HDECSA005WJKA AN V Shine Trim
1-6 HPNLSA098WJSA AX V Speaker Sheet
1-7 PSPAHB079WJZZ AE V Spacer (Top, Bottom), x2
1-8 PSPAHB080WJZZ AD V Spacer (Side), x2
1-9 PSPAHB085WJZZ AB V Spacer (LED Cover), x2
1-10 PSPAZB264WJZZ AD V Spacer, x6
1-11 XEBS930P08000 AA J Screw, x4
2 CCABBA998WJ01 BH S V Rear Cabinet Ass'y
2-1 Not Available - N - Rear Cabinet
2-2 HINDPC167WJ4A AH S V Terminal Label
2-3 PSPAHB074WJZZ AB V Spacer, x2
2-4 PSPAHB146WJ4Z AC N V Spacer, x2
2-5 PSPAHB147WJ4Z AD N V Spacer, x2
2-6 PSPAHB148WJ4Z AD N V Spacer
2-7 PSPAHB149WJ4Z AB N V Spacer
2-8 PSPAHB150WJ4Z AB N V Spacer, x2
2-9 PSPAHB151WJ4Z AB N V Spacer
3 CCOVAC064WJ01 AN N V Top Cover Ass'y
3-1 Not Available - N - Top Cover
3-2 JBTN-A645WJ4A AE N V Power Bottom
3-3 JBTN-A646WJ4A AG N V Operate Bottom
3-4 MSPRCA070WJ2J AB J Spring
3-5 PSPAHB152WJ4Z AB N V Spacer
5 DUNTKD892FM50 BV N V Main Unit (LC-32PX5M)
5 DUNTKD892FM51 BV N V Main Unit (LC-32PX5X)
6 DUNTKD893FM50 BT N V Tuner/Av Unit (LC-32PX5M)
6 DUNTKD893FM51 BT N V Tuner/Av Unit (LC-32PX5X)
7 DUNTKE095FM02 AQ N V LED, R/C Unit
8 DUNTKE097FM02 AN N V Operation Unit
9 GCOVAB731WJSA AS J AV Terminal Cover
10 GCOVAB736WJKA AD J Bus Cover, x2
11 GCOVAB937WJ4A AH V Stand Area Cover
12 HINDPC148WJSA AE N V Model Label (LC-32PX5M)
12 HINDPC147WJSA AE N V Model Label (LC-32PX5X)
13 LANGKA638WJFW AL V LCD Angle A, x2
14 LANGKA672WJFW AF V LCD Angle C
15 LANGKA792WJFW AG J Pwb Bracket B
16 LANGKA908WJFW AH V Support Angle
17 LANGKA934WJFW AR V Sus Angle (L)
18 LANGKA985WJFW AS S V Sus Angle (R)
19 LANGKB020WJFW AL N V LCD Angle B, x2
20 LANGTA413WJFW AU V Stand Angle
21 LCHSMA369WJZZ BB S V Chassis Tray
22 LHLDFA028WJKZ AC J Wire Holder A
23 LHLDWA120WJKZ AB J Wire Holder B, x2
24 LHLDWA134WJKZ AB J Wire Holder C
25 LX-HZA003WJFN AC J Screw, x2
26 PSPAGA344WJZZ AC N J Spacer, x4
27 PSPAHA702WJZZ AB N V Spacer
28 PSPAZB366WJZZ AE N V Rubber Spacer, x2
29 QCNW-E756WJQZ AH N V Connecting Cord (SH)
30 QCNW-E758WJQZ AL N V Connecting Cord (LA)
31 QCNW-E759WJQZ AL J Connecting Cord (PE)
32 QCNW-E760WJQZ AK J Connecting Cord (PD)
33 QCNW-E762WJQZ AP J Connecting Cord (RA)
34 QCNW-E764WJQZ AK N V Connecting Cord (SP)
35 QCNW-F068WJPZ AZ N V Connecting Cord (LV)
36 R1LK315T3LZ4BX EE N V 32" LCD Panel Module Unit
37 RDENCA182WJQZ BS N V Power Unit
38 RSP-ZA203WJZZ BB V Speaker (L)
39 RSP-ZA204WJZZ BB V Speaker (R)
40 TLABNB947WJZZ AB N V No Label (LC-32PX5M)
40 TLABNB946WJZZ AB N V No Label (LC-32PX5X)
41 XBBS830P08000 AA J Screw, x4
42 XBPS730P06WS0 AA J Screw, x43
43 XBPS830P06000 AA J Screw, x2
44 XEBS930P08000 AA J Screw, x3
45 XEBS930P10000 AA J Screw, x5
46 XEBS930P16000 AB J Screw, x2
47 XEBS940P16000 AB J Screw, x19
48 QCNW-F546WJQZ V Connecting Cord (KM)

4
LC-32PX5M/X/LC-37PX5M/X
[5] CABINET PARTS (LC-37PX5M/X)

42
15 45

45
3-1 42

17 45
3
3-5
3-2 42 42
3-3 16
3-4 45
42 16
8 35
48
46 45 26

44 䎴
17
䎤 24 䎩 42
37 䎪 34
15
1
1-7 䎧
24
1-1 1-8
47

1-10 41 39
1-5 1-11 38 41 12
28
1-6 䎤
䎧 䎫
䎨 45 45
1-7 1-8 41

1-2 1-10 2-5
2 2-6
1-11 7
1-10 1-10

1-10 2-3
1-10 2-1
1-4 1-9
40 2-4 2-5
18 40
1-3
18 2-4 2-2

42
25

42 25 42
36 䎮 䎲 䎥 13
31 䎳 42


29 40 40 19
27 䎱 33 11 47
42
䎰 32
42 䎨
27

42 䎫 14
5 42

30 22
䎮 21 䎱 10
22 䎪 43
42
6 10
䎦 23
䎲 45

20 9

5
LC-32PX5M/X/LC-37PX5M/X

NO. PARTS CODE PRICE NEW PART DESCRIPTION


RANK MARK DELIVERY

[5] CABINET PARTS (LC-37PX5M/X)


1 CCABAB582WJ04 BU S V Front Cabinet Ass'y
1-1 Not Available - - Front Cabinet
1-2 GCOVAC065WJ4A N V Front Cover
1-3 Not Available - - Badge, "SHARP"
1-4 HDECQA667WJSA V Decoration Cover
1-5 HDECSA004WJKA AP V Shine Trim
1-6 HPNLSA097WJSA AX V Speaker Sheet
1-7 PSPAHA933WJZZ AE V Spacer (Top, Bottom)
1-8 PSPAHA934WJZZ AD V Spacer (Side)
1-9 PSPAHB085WJZZ AB V Spacer (LED Cover), x2
1-10 PSPAZB264WJZZ AD V Spacer, x6
1-11 XEBS930P08000 AA J Screw, x4
2 CCABBA999WJ01 BK S V Rear Cabinet Ass'y
2-1 Not Available - N - Rear Cabinet
2-2 HINDPC167WJ4A AH N V Terminal Label
2-3 PSPAHB149WJ4Z AB N V Spacer
2-4 PSPAHB153WJ4Z AC N V Spacer
2-5 PSPAHB154WJ4Z AD N V Spacer
2-6 PSPAHB155WJ4Z AD N V Spacer
3 CCOVAC064WJ01 AN S V Top Cover Ass'y
3-1 Not Available - N - Top Cover
3-2 JBTN-A645WJ4A AE N V Power Bottom
3-3 JBTN-A646WJ4A AG N V Operate Bottom
3-4 MSPRCA070WJ2J AB J Spring
3-5 PSPAHB152WJ4Z AB N V Spacer
5 DUNTKD892FM52 BV N V Main Unit (LC-37PX5M)
5 DUNTKD892FM53 BV N V Main Unit (LC-37PX5X)
6 DUNTKD893FM52 BT N V Tuner/Av Unit (LC-37PX5M)
6 DUNTKD893FM53 BT N V Tuner/Av Unit (LC-37PX5X)
7 DUNTKD897FM53 AQ N V LED, R/C Unit
8 DUNTKE097FM04 AN N V Operation Unit
9 GCOVAB738WJSA AS J AV Terminal Cover
10 GCOVAB736WJKA AD S J Bus Cover, x2
11 GCOVAB907WJ4A AK S V Stand Area Cover
12 HINDPC150WJSA AE N V Model Label (LC-37PX5M)
12 HINDPC146WJSA AE N V Model Label (LC-37PX5X)
13 LANGFA330WJFW AL V Support Angle
14 LANGKA792WJFW AG J Pwb Bracket B
15 LANGKA939WJFW AK V LCD Angle L
16 LANGKB021WJFW AK N V LCD Angle R
17 LANGKB025WJFW AM N V LCD Angle Center, x2
18 LANGTA403WJFW AV V Center Angle, x2
19 LANGTA421WJFW AT V Stand Angle
20 LCHSMA369WJZZ BB S V Chassis Tray
21 LHLDFA028WJKZ AC J Wire Holder A
22 LHLDWA120WJKZ AB J Wire Holder B, x2
23 LHLDWA134WJKZ AB J Wire Holder C
24 LX-HZA003WJFN AC J Screw, x4
25 PSPAGA344WJZZ AC S J Spacer, x4
26 PSPAHB156WJ4Z AB N V Spacer
27 PSPAZB366WJZZ AE S V Rubber Spacer, x2
28 QCNW-E752WJQZ AP J Connecting Cord (RA)
29 QCNW-E756WJQZ AH N V Connecting Cord (SH)
30 QCNW-E758WJQZ AL N V Connecting Cord (CN1)
31 QCNW-E759WJQZ AL N V Connecting Cord (PE)
32 QCNW-E760WJQZ AK N V Connecting Cord (PD)
33 QCNW-F068WJPZ AZ N V Connecting Cord (LV)
34 QCNW-F613WJQZ AK N V Connecting Cord (SP)
35 R1LK370T3LZ5BX EZ N V 37" LCD Panel Module Unit
36 RDENCA182WJQZ BS N V Power Unit
37 RSP-ZA203WJZZ BB V Speaker (L)
38 RSP-ZA204WJZZ BB V Speaker (R)
39 TLABNB949WJZZ AB N V No Label (LC-37PX5M)
39 TLABNB945WJZZ AB N V No Label (LC-37PX5X)
40 XBBS740P06000 AA J Screw, x4
41 XBBS830P08000 AA J Screw, x6
42 XBPS730P06WS0 AA J Screw, x43
43 XBPS830P06000 AA J Screw, x2
44 XEBS930P08000 AA J Screw
45 XEBS930P10000 AA J Screw, x13
46 XEBS930P16000 AB J Screw, x2
47 XEBS940P16000 AB J Screw, x13
48 QCNW-F564WJQZ V Connecting Cord (KM)

6
LC-32PX5M/X/LC-37PX5M/X
[6] SUPPLIED ACCESSORIES

Remote control unit “AAA” size battery ( 2) AC cord

X1 X2 X3

AC cord clamp Cable clamp Cable tie

X4 X5 X6

Stand unit Operation manual

X7 X8 X9 X10 X12

Stand base Stand post Short screws ( 4)

Long screws
X11 ( 4)

Hex key

NO. PARTS CODE PRICE NEW PART DESCRIPTION


RANK MARK DELIVERY

[6] SUPPLIED ACCESSORIES


X1 RRMCGA563WJSA AS N V Remote Control Unit
X2 Not Available - - "AAA" size Battery, x2
! X3 QACCKA013WJPZ AN J AC Cord 4m (LC-32/37PX5M)
! X3 QACCLA039WJPZ AX V AC Cord 4m (LC-32/37PX5X)
X4 LHLDWA012WJKZ AC J AC Cord Clamp
X5 LHLDWA131WJKZ AE J Cable Clamp
X6 LHLDWA083WJ00 AD J Cable Tie
X7 CDAI-A334WJ01 V Stand Base Ass'y (LC-32PX5M/X)
X7 CDAI-A336WJ01 V Stand Base Ass'y (LC-37PX5M/X)
X8 CDAI-A335WJ01 N V Stand Support Ass'y (LC-32PX5M/X)
X8 CDAI-A328WJ01 N V Stand Support Ass'y (LC-37PX5M/X)
X9 LX-BZA147WJF8 AE J Short Screws, x4
X10 LX-BZA146WJF7 AC J Long Screws, x4
X11 UKOGLA006WJZZ V Tool for Stand (LC-32PX5M/X)
X11 UKOGLA001WJZZ V Tool for Stand (LC-37PX5M/X)
X12 TINS-C948WJZZ AR N V Operation Manual (LC-32/37PX5M)
X12 TINS-C949WJZZ AK V Operation Manual (LC-32/37PX5X)

7
LC-32PX5M/X/LC-37PX5M/X
[7] PACKING PARTS (NOT REPLACEMENT ITEM)

X12

S7
X1 X2
X4
X5
X6
S6

X3

S5

S5

X7
X8
X9
X10
X11

S4
S3

S2
S2

S8

S1

8
LC-32PX5M/X/LC-37PX5M/X

NO. PARTS CODE PRICE NEW PART DESCRIPTION


RANK MARK DELIVERY

[7] PACKING PARTS (NOT REPLACEMENT ITEM)


S1 SPAKCD257WJZZ - - Packing Case (LC-32PX5M)
S1 SPAKCD256WJZZ - - Packing Case (LC-32PX5X)
S1 SPAKCD260WJZZ - N - Packing Case (LC-37PX5M)
S1 SPAKCD261WJZZ - N - Packing Case (LC-37PX5X)
S2 SPAKXB390WJZZ - - Packing Add. (LC-32PX5M/X)
S2 SPAKXB392WJZZ - S - Packing Add. (LC-37PX5M/X)
S3 SPAKPA611WJZZ - - Wrapping Paper (LC-32PX5M/X)
S3 SPAKPA613WJZZ - - Wrapping Paper (LC-37PX5M/X)
S4 CDAI-A334WJ02 - - Stand Ass'y (LC-32PX5M/X)
S4 CDAI-A336WJ02 - - Stand Ass'y (LC-37PX5M/X)
S5 SPAKXB389WJZZ - - Packing Add. (LC-32PX5M/X)
S5 SPAKXB391WJZZ - S - Packing Add. (LC-37PX5M/X)
S6 SSAKA0128AJZZ - N - Polyethylene Bag (Small)
S7 SSAKA0005PEZZ - - Polyethylene Bag (A4)
S8 TLABV0182AJZZ - - No. Label
[8] SERVICE JIG
N QCNW-E540WJQZ CD J Extension Cable, 26pins B to B (DM)
N QCNW-C222WJQZ AW J Extension Cable, 80pins Panel
N QCNW-E341WJQZ BG J Extension Cable, 30pins MAIN to LCD (LV)
N QCNW-E977WJQZ AY J Extension Cable, 14pins PWR to INVERTOR (LA) (37PX
N QCNW-E995WJQZ AY J Extension Cable, 14pins PWR to INVERTOR (LA) (32PX

9
LC-32PX5M/X/LC-37PX5M/X

COPYRIGHT © 2007 BY SHARP CORPORATION

ALL RIGHTS RESERVED.

No Part of this publication may be reproduced,


stored in a retrieval system, ortransmitted in
any from or by any means, electronic, mechanical,
photocopying, recording, orotherwise, without
prior written permission of the publisher.

SHARP CORPORATION
AV Systems Group
Apr. 2007 Printed in Japan CS PromotionCenter
TQ2156-S SY. KG Yaita,Tochigi 329-2193, Japan

Vous aimerez peut-être aussi