Académique Documents
Professionnel Documents
Culture Documents
Press an
While yo
other ha
To use this universal remote with your home entertainment at the sa
system, first you need to program it to control your devices.
There are four ways you can program the universal remote
Universal Remote Control to operate your devices. Try them in the order listed here:
Owner’s Manual • The Brand Code Search searches through the codes
for select brands of devices.
RCR314WR / RCR313BR • The Direct Code Entry lets you enter a code from the
Manual del Propietario (parte posterior) accompanying code list for your brand of device.
5. Wait unt
FCC Statement: • The Auto Code Search goes automatically through all Then rele
This device complies with part 15 of the FCC Rules. Operation is subject the codes for the device you’re trying to control.
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. • The Manual Code Search lets you manually go 6. Look at t
Note: This equipment has been tested and found to comply with the through all the codes for the device you’re trying to your dev
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Press tha
These limits are designed to provide reasonable protection against control.
harmful interference in a residential installation. This equipment keypad.
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no Brand Code Search
guarantee that interference will not occur in a particular installation. If The Brand Code Search goes through only the codes for one
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and of the select brands listed in the accompanying code list. If 7. Point the
on, the user is encouraged to try to correct the interference by one or your brand of device is listed, this search can be very quick front pan
more of the following measures:
• Reorient or relocate the receiving antenna. and easy. to contro
• Increase the separation between the equipment and receiver. remote a
• Connect the equipment into an outlet on a circuit different from that TIPS: Each device key is associated with a type of device— remote is
to which the receiver is connected. the TV is preset to search for TVs, SAT•CBL•STREAM for
• Consult the dealer or an experienced radio/TV technician for help. your dev
Caution: Any Changes or modifications not expressly approved by the
satellite receivers, cable boxes, digital TV converters, or
party responsible for compliance could void the user’s authority to streaming media players and DVD•VCR for VCRs or DVD Did you
operate this equipment. players.
YES: Pre
Industry Canada Regulatory Information The POWER key serves as an indicator light during
This class B digital apparatus complies with Canadian ICES-003
done! Yo
Avis d’Industrie Canada programming, giving you feedback at each stage of the
Cet appareil numérique de la classe B est conforme a la nome process. NO: Pres
NMB-003du Canada code for
To exit without saving a new code at any point in the Brand
SAVE THIS MANUAL AND THE CODE LISTS! Code Search, press the GO BACK key. Keep pre
Remote controls can sometimes lose their programming when device tu
you change the batteries. Make sure you keep the manual and
code lists in a safe place so that you can reprogram the remote
if you need to. 1. Manually turn on the device NOTES
you want to control. Throughou
Congratulations on your purchase of this 3-device RCA
Universal Remote Control. This remote features a library keep the re
of codes with the latest devices of all major brands, with you are cur
support for streaming media players as well. The navigation Test the rem
keys have been redesigned to function seamlessly with the 2. If you’re programming the TV or device key
more sophisticated menu and guide systems found in today’s SAT•CBL•STREAM key, go to step 3.
home entertainment devices. maximum f
If you’re programming the DVD•VCR key, you need a different c
to tell the remote which kind of device you want this Functionali
Step 1: Install your batteries key to control, VCR or DVD. During the
keypresses
Press and hold the DVD•VCR key. While you’re holding
Your universal remote requires two AA alkaline batteries down the DVD•VCR key, use your other hand to press The search
(batteries may or may not be included, depending on model). the number key for the type of device you want to blinks four
control with this key: 2 for VCR, 3 for DVD. code under
To install the batteries:
The POWER
1. Remove the battery compartment remote has
cover.
the Brand C
2. Insert the batteries, matching the yet, try a di
batteries to the (+) and (–) marks
inside the battery compartment.
3. Push the battery cover back into Testing the
place. 1. Try a var
If some d
Battery Precautions: to try a d
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or 2. Repeat th
rechargeable (nickel-cadmium) batteries. When th
• Always remove old, weak or worn-out batteries promptly press the
and recycle or dispose of them in accordance with Local Instead,
and National Regulations.
POWER
code tha
...... ...... ...... ......
...... ............ ...... 10812, ...... ............ ............
iral ...... ...... ......
Adm ent ...... ...... ........... ...... ............ .................. 107
...... ...... ...... ......
sts
e Sea ......
d Cod Alb erica .................. ............ . 104 ...... ...... .
Am m.................. ...... ............
e Li
Bran de. ...... ...... ......
...... ......
g the r’s Gui Ana C ...... ital...... ...... ...... ...... ............ ....
Cod
......
g usin Use AO x Dig x ...... ........................ ...... ............ ...
ódig
prog ined zan o Aud ........................ ...... ............ ...... ............
for outl ar utili ltad ...... ntura ............ ...... ............ ...... ...........
hod resa
eC
used
met
ram
Ave on...... ell
...... ...... ...... ...... ........
es are Entry prog marcas, ......
ad
d Cod and os para
igos
de
Bell Q ...... ............ ...... ...... ...... .....
...... ......
Bran zad s ......
4.
utili de cód . Ben dford ...... ........................ ...... ...
List
Test the
son rca
cas entrada usu
ario
Ma Bra ksonic ...... ...... ............ ......
mar y del de Bro dle .................. ...... .......................
las da
la guía
os Can nivale ......
...... ...... ...... .....
de
igos de bús
que
en Có dig ...... ...... ......
Car ver...... ...... ...... ...... .........
cód s de Car ra ...... .................. ...... ......
/Lista
Los odo
los
mét Cele nghong ...... ............ s ...... .
List Vizio
control a
ng
Samsu
vox Panas
onic 7 Con ig ...... ...... ............ ..
Magna 6 Cra sley ...... ...... ............
Cro wn ......thes ............
JVC
Philips
5 Cro tis Ma ...... ...........
ia 4
that has
Panas ...... o
vox Mitsub
ishi 7 Del on
Den mond ........
Visi
Magna 6 Dia ont .
5
Pionee
r
8 Eme ...
...... r
7
device’s
onic
vox Panas Emp
Magna 6 Env
JVC
Philips
5 ESA
RCA Apex 4 Fi
GE 3 onic
F
PROSC
AN
2 BLE AMNIO
Panas
1 CA Magna
vox ADB
0 SAT/ Hughesrk 9
fic Philips
Scienti a
l Netwo s
Atlant
8
7
code sto
k Generaents System
Dish
Networs/ Instrum
System r 6
DirecT
V Echosta 5
RCA Motor
ola 4
GE 3
PROSC
AN
2
1
0
another
mote 4. Press and hold the device key you want to program. Direct Code Entry Auto Co
While you’re holding down the device key, use your Direct Code Entry lets you enter a code from the The Auto Co
other hand to press and hold the remote’s POWER key accompanying code list for your brand of device. It’s not as codes for th
tertainment at the same time. easy as the other methods, but it’s potentially the fastest the one tha
our devices. method. and store th
ersal remote
isted here: TIP: Each device key is associated with a type of device—the
TIPS: Each
h the codes TV is preset to search for TVs, SAT•CBL•STREAM for
of device—
satellite receivers, cable boxes, digital TV converters, or
SAT•CBL•S
streaming media players, and DVD•VCR for VCRs or DVD
digital TV c
de from the players.
DVD•VCR f
device. The POWER key serves as an indicator light during
5. Wait until the POWER key comes on and stays on. programming, giving you feedback at each stage of the
To exit with
y through all Then release both keys. Auto Code
process.
ntrol.
6. Look at the number you circled for 1. Manually turn on the device you 1. Manua
lly go want to
trying to your device’s brand code number. want to control.
Press that number on the remote
keypad.
odes for one 2. Find the Code List that came with e Li
sts d Cod
e Sear
ch
iral
Adm ent ......
......
......
Adv ...... ............ ......
......
......
... .
......
...
...... ............ ...... 10060, ...... ....
...... ............ ...... 11675, ...... ............
...... ......
...... ............ ...... 10812, ...... ............ ............
......
......
......
...... ........... ...... ............ .................. 107
...... ......
......
Aiko i ...... ............ ...... ........................
Aka tron Action ...... ...... ...... 51, . 10875,...
......
......
...... ...... 10156, 10
......
2. If you’r
7. SAT•C
Bran e. ...... ......
g the r’s Guid Ana ...... tal...... ...... ...... ...... ............ ....
Cod
......
g usin Use AOC x Digix ...... ........................ ...... ............ ...
dig
prog ined zand Aud ........................ ...... ............ ...... ............
e Có
used
met
ram
Ave n...... ell
...... ...... ...... ...... ........
es are Entry prog marcas, ......
Axio & How............ ...... ............ ...... ..
ad
d Cod and s para de ...... ......
zado gos Bell Q ...... ............ ...... ...... ...... .....
Bran utili de códi s ......
Ben ford ...... ........................ ...... ...
List
son rio. rca ic ...... ......
cas entrada usua Ma Brad son ...... ...... ......
mar
las ueda
y del s de Brok dle .................. ...... .......................
de la guía igo Can ival ......
e ...... ...... ...... .....
gos
códi s de
búsq en Cód ...... ...... ......
Carn er...... ...... ...... ...... .........
Los odo ta de Carv ra ...... .................. ...... ......
los
mét /Lis Cele nghong ...... ............ s ...... .
List
e
Vizio
Cha en ...... ...... tion ......
very quick
......
nd TV cial
If you’r
Sony Clar mer ............ ...... .....
Bra Sharp 9 Com certo ...... ...... .....
...... ......
Samsu
ng 8 Con tec .............................. ....
vox Panaso
nic
7 Con g ...... ...... ............ ..
Magna 6 Crai ley ...... ...... ............
Cros n ...... hes ............
JVC
Philips
5 Crowis Mat ...... ...........
RCA Insigni
a
4 Curt ............ ...... ........
GE 3 Toshiba ...... ............ ...... .......
PROSC
AN
2 onic ...... ............ ...... ..
VCR
Symph
1 CXC on ....................
to tell t
Panaso
nic
8 Dell on ...... Visio
vox Mitsub
ishi 7 Den ond ........
Magna 6 Diam ont .
JVC
Philips
5 Dumabra ...
nd
RCA Samsu
ng
4 Dur n......
GE 3 Toshiba Dwi ex .....
r
PROSC
AN
2 D Sony Dyn trog
1 DV Sharp
Elec troh
0 ng
9 Elec rso
key to c
nic
vox Panaso Emp
Magna 6 Env
JVC
Philips
5 ESA
RCA Apex 4 Fi
GE 3 nic F
PROSC
AN
2 LE AMNIO
Panaso
of device—
1 AB Magna
vox ADB
0 SAT/C 9
fic Philips
s Scienti
Hughe k Atlanta
8
remote is testing a single code for your brand and keep them handy.
l Networ s
Generaents System 7
Dish
Network/ Instrum
Systems r 6
DirecTV
Echosta 5
RCA Motoro
la
4
GE 3
PROSC
AN
2
Press a
1
EAM for
0
NOTES
Throughout the programming of each key, be sure to
keep the remote pointed at the IR sensor of the device
you are currently programming the remote to control.
Test the remote with the device to make sure the
device key is programmed with the correct code for
maximum functionality. If some features don’t work, try 3. Press a
ey, you need a different code. See the “Testing the Code for Maximum While y
want this Functionality” section below for more information. other h
During the Brand Code Search, the remote ignores at the s
keypresses that aren’t part of the search.
u’re holding
nd to press The search times out after two minutes (the POWER key 4. When you’ve finished entering the five-digit code, keep
want to blinks four times and turns off, and the last programmed holding down the device key and look at the POWER
code under that device key is retained). key.
The POWER key blinks four times and turns off when the Is the POWER key on?
remote has gone through all the codes. The remote exits YES: You’re done! You’ve programmed this device key.
the Brand Code Search. If your device hasn’t turned off
yet, try a different search method. NO, it blinked four times and turned off: You have
either entered a code number that is not in the code lists 4. Wait un
or missed a step in the code entry procedure. Try step 3 Then re
Testing the Code for Maximum Functionality again.
1. Try a variety of the device’s functions with the remote.
If some device features don’t work, go to the next step NOTES 5. Point th
to try a different code. front pa
Remember to enter the code for future reference in the
want to
2. Repeat the Brand Code Search from the beginning. box provided in the Code Retrieval section of this manual.
the rem
When the device turns off for the first time, don’t If your brand isn’t listed in the code list, use one of the The rem
press the STOP key, which would store the same code. Code Search methods to program the remote control. 10 code
Instead, with the unit now off, continue to press the (Refer to the Auto and Manual Code Search methods.)
POWER key repeatedly until the unit turns back on.
If you release the device key any time during the Direct
3. Once the unit turns back on, you have found another Did yo
......
... . ...
...... ............ ...... 10060, ...... ....
......
...... ............ ...... 11675, ...... ............
......
..
Code Entry procedure, the POWER key blinks four times,
code that operates the device. Press the STOP key.
...... ...... ...... ......
...... ............ ...... 10812, ...... ............ ............
iral ...... ...... ......
YES: G
...... ...... ...... ......
Adv o ...... ............ ...... ...... ...... 10156, 100
......
rch Aik i ...... ............ ...... ........................ ....
...... 101
80, 1
Aka atron Action ...... ...... ...... 51, . 10875,...
s e Sea ......
Alb erica .................. ............ . 104 ...... ...... .
List
d Cod
Bran de. Am m.................. ...... ............ ...... ...... ......
...... ......
g the r’s Gui Ana C ...... ital...... ...... ...... ...... ............ ....
......
g usin Use AO x Dig x ...... ........................ ...... ............ ...
ódig
ned zan o Aud ........................ ...... ............ ...... ............
ar utili ltad ...... ntura ............ ...... ............ ...... ...........
eC
ram
cas, Ave ...... ell ...... ...... ...... ...... ........
prog mar on ......
Axi & How............ ...... ............ ...... ..
os para igos
de
Bell Q ...... ............ ...... ...... ...... .....
...... ......
zad s ......
4.
utili de cód . Ben dford ...... ........................ ...... ...
NO: Pre
...... ...... ...... .....
la guía Can nivale ......
Códig ...... ...... ......
Car ver...... ...... ...... ...... .........
a de Car ra ...... .................. ...... ......
List Cele nghong ...... ............ s ...... .
ist/ a
Vizio
Cha zen ...... ...... tion ......
Toshib Citi ion...... Solu ............ ......
....
TV Sony cial
Clar mer ............ ...... .....
Sharp 9 Com certo ...... ...... .....
...... ......
8 Con tec .............................. ....
of 10 co
Magna
Cro wn ......thes ............
Philips
5
Test the remote with the device to make sure the device
JVC
Cro tis Ma ...... ...........
4 Cur ...... ...... ...... ........
3 Toshib
a
...... ............ ...... .......
2 onic ...... ............ ...... ..
VCR
Symph
1 Sony CXC ron ....................
Sharp 9 Cyt woo ...... ..
Dae l ............ ......
onic 8
Keep pr
0 Samsu
ng
9 Elec rso
Pionee
r
8 Eme ...
...... r
7
1 CA Magna
vox ADB
SAT/
turns o
0 fic
s Scienti a
Philips
9
Hughe rk Atlant
l Netwo s 8
7
another code.
Auto Code Search 6. When your device turns off, press The POWER
The Auto Code Search goes automatically through all the the REVERSE key on the remote programmin
e. It’s not as and wait at least 2 seconds. process.
codes for the device you’re trying to control. When you find
he fastest the one that operates your device, you can stop the search The remote tries the last of the The Manual
and store that code. previous ten codes. because the
its memory
Did your device turn on?
device—the Codes or the
TIPS: Each device key is associated with a type YES: Press the STOP key. You’re the Direct Co
M for
of device—the TV is preset to search for TVs, done! You’ve programmed this
rters, or To exit witho
SAT•CBL•STREAM for satellite receivers, cable boxes, device key.
Rs or DVD Manual Cod
digital TV converters, or streaming media players, and
DVD•VCR for VCRs or DVD players.
ng NO: Press REVERSE again. The remote tests the next
To exit without saving a new code at any point in the
e of the
Auto Code Search, press the GO BACK key. code in the batch. 1. Manuall
Keep pressing REVERSE every 2 seconds until your want to
1. Manually turn on the device you device turns back on. When it does, press STOP.
want to control. Note: If you accidentally press the REVERSE key after
your device turns on, press the FORWARD key. Then, wait
two seconds to see if your device turns off again.
2. If you’re
NOTES SAT•CB
e Sear
ch
iral
Adm ent ......
......
......
......
......
Adv ...... ............ ......
...
......
...... ......
......
......
.
......
...
...... ............ ...... 10060, ...... ....
...... ............ ...... 11675, ...... ............
......
...... ............ ...... 10812, ...... ............ ............
......
......
...... ........... ...... ............ .................. 107
......
to tell th
dig
zand Aud ........................ ...... ............ ...... ............
ar utili ltado a
...... ntur ............ ...... ............ ...... ...........
ram resa ...... ...... ...... ...... ........
prog cas, Ave n...... ell ......
...... ......
ara de mar
s
Axio & How...... ...... ...... ....................
Bell Q ...... ............ ...... ...... ...... .....
digo s ......
Ben ford ...... ........................ ...... ...
o. rca ic ...... ......
uari Ma ...... ...... ......
key to co
Vizio ......
Cha en ...... ...... tion
Toshiba Citiz ion...... Solu ............ ......
...
TV cial
ic Samsu
ng 8 Con tec .............................. ....
anason 7 Con g ...... ...... ............ ..
6 Crai ley ...... ...... ............
Press an
Magna .
Diam ont
VC Philips
5 Dumabra ...
nd
4 Dur n......
3 Toshiba Dwi ex .....
r
2 D Sony Dyn trog
Elec troh
DV Sharp
Samsu
ng
9 Elec rso
Pionee
r
8 Eme ...
...... r
7
key to control, VCR or DVD. Test the remote with the device to make sure the
nic
vox Panaso Emp
Magna 6 Env
JVC
Philips
5 ESA
down th
Apex 4 Fi
3 nic F
CAN
2 LE AMNIO
Panaso
1 AB Magna
vox ADB
0 SAT/C 9
fic Philips
s Scienti
Hughe k Atlanta
l Networ s 8
Generaents System 7
the num
RCA Motoro
GE 3
PROSC
AN
2
The POWER key blinks four times and turns off when the
remote has gone through all the codes. The remote exits
the Auto Code Search. If your device hasn’t turned off
yet, try a different search method.
ey after The POWER key blinks four times and turns off when the IMPORTAN
Then, wait remote has gone through all the codes. The remote exits
in. the Manual Code Search. If your device hasn’t turned off Because thi
2. If you’re programming the TV or yet, try a different search method. you must fi
SAT•CBL•STREAM key, go to step 3. to operate.
If you’re programming the DVD•VCR key, you need you must fi
sure to Testing the Code for Maximum Functionality TV Mode. T
to tell the remote which kind of device you want this
e device you press a
key to control, VCR or DVD. 1. Try a variety of the device’s functions with the remote.
control. remote is in
Press and hold the DVD•VCR key. While you’re holding If some features of your devices don’t work, go to the
player, you
he down the DVD•VCR key, use your other hand to press next step to try a different code.
device mod
de for the number key for the type of device you want to 2. Repeat the Manual Code Search from the beginning.
work, try control with this key: 2 for VCR, 3 for DVD. When the device turns off for the first time, don’t
Maximum press the STOP key, which would store the same code. Backlight
tion. Instead, with the unit now off, continue to press the Backlight illu
POWER key repeatedly until the unit turns back on. keys better in
res
3. Once the unit turns back on, you have found another on or off by p
code that operates the device. Press the STOP key. stays on as lo
OWER key seconds after
4. Test the key’s functionality again by trying a variety
ogrammed timed out, an
of functions. If the code controls the majority of the
illumination i
device’s functions, programming is complete. If the
backlight turn
f when the code stored does not give maximum functionality, try
mote exits another code.
ned off
Advan
Tour of the Remote
Code Ret
ty 3. Press and hold the device key you want to program.
In most cases, the keys
Once you’ve
While you’re holding down the device key, use your devices, you
he remote. on this remote perform
other hand to press and hold the remote’s POWER key reference. If y
xt step to the same functions
at the same time. is easy. Just fi
as the keys on your
of them in th
original remotes once
the Search metho
you’ve programmed this
ot stop Direct Entry m
remote to operate your
ntinue to need to retrie
components. Many keys
e unit turns the actual cod
on this remote have other
if you ever ne
functions as well.
RSE key programming
vice turns Illuminated POWER key codes are rec
press the 4. Wait until the POWER key comes on and stays on. serves as an indicator to reprogram
Then release both keys. light to provide feedback. quick and eas
ing to
the code
5. Point the remote directly at the front panel of the device Device keys (TV,
POWER
you want to control. Press POWER on the remote and SAT•CBL•STREAM,
f the DVD•VCR) put the remote
wait 2 seconds. The remote is testing a single code for
e. If the in the right mode to
your device.
onality, try control your device.
Did your device turn off?
LIGHT key ( ) turns
YES: Press the STOP key to store
backlighting on/off.
the code. You’re done! You’ve
programmed this device key. GUIDE/HOME and MENU 2. While ho
hrough NO: Press POWER again. The access the same features INFO-OP
. When remote tests the next code for as the keys on your holding d
n stop the your device. original remotes. key turns
Keep pressing POWER every 2 Arrow keys act as 3. Release b
seconds until your device turns off. navigation keys for 4. Starting
device—
AM for When it does, press STOP. streaming media players number k
rters, or as well as in menu and then 0. T
TIP: Because there are so many codes, you may have to Actual model may vary from
s or DVD guide systems for other blink is th
press the POWER key many times—possibly hundreds of illustration
devices. number o
times.
CHAN and VOL keys act as channel and volume controllers. Note: All TV codes begin with the number 1; all VCR • There is a
ep the The CHAN keys also provide skip forward and skip back and DVR codes begin with the number 2; all DVDs, able to co
control for DVD players and DVRs that support this the number 3; and all satellite receivers, cable boxes, only turn
you are
functionality. streaming players, and DTV converters, the number 5. key is pro
functiona
he GO BACK exits remote programming; it also performs the 5. Repeat step 4 until you have retrieved all five numbers of the dev
de for same functions as on your original remotes. in the code. After the fifth number is retrieved, the features o
work, try POWER key blinks briefly, then turns off. remote w
Maximum The INPUT and — (dash) key has three functions: (1) it TIP: To exit the Code Retrieval Mode at any time, press Entry Me
ation. toggles through all the video sources connected to your TV; the GO BACK key. to contro
(2) when the remote is in VCR mode, this button toggles codes can
gnores between VCR and the TV input; (3) when you’re entering Note: If you press an invalid key during the Code
digital channel numbers directly, this button lets you Retrieval process, the remote will not respond. If Problem: The
OWER key separate the main channel number from the sub-channel you do not press a valid Code Retrieval key (TV, key.
ogrammed number (such as 59.1). SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), • You may
Code Retrieval times out after 15 seconds. The POWER remote is
key blinks four times, and then turns off.
f when the • Make sur
IMPORTANT the corre
mote exits
turned off TV CODE SAT•CBL•STREAM CODE DVD•VCR
Because this remote controls more than one device,
you must first “tell” the remote which device you wish • Make sur
to operate. That means, if you wish to operate your TV, 1 5 Replace t
you must first press the TV key to put the remote in the (see the B
erly installed.
s properly.
y pressing
REAM,
o operate.
VD player has
e the remote is