Académique Documents
Professionnel Documents
Culture Documents
6 Each 3090F
1 Each PHT 05
2 Each 3108
6 Each 3090F
1 Each PHT 05
1 Each 3005 For Panic
2 Each PA bracket
2 Each 3108
HARDWARE FOR SET: 3
DOORS: FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1
NOTES:
QTY UNIT ITEM CODE
3 Each 3090F
1 Each PHT 05
1 Each 3108
NOTES: Since it is mentioned as Metal Door in Floor plan and Legend. It is considered as MT door Fire Rated and
QTY UNIT ITEM CODE
6 Each 3090F
2 Pair TGDI-D300
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 5
DOORS: FD1, FD1, FD1, FD1
NOTES:
QTY UNIT ITEM CODE
6 Each 3090F
2 Pair TGDI-D300
2 Each PA bracket
2 Each 3101-1
1 Each 3124
2 Each 3108
1 Each 3515
1 Pair CR 6612
HARDWARE FOR SET: 6
DOORS: D7, D7, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D11, D3, D3, D3, D3, D3, D3, D3, D3
As per the floor plan and legend it is mentioned as Steel frame with Flush shutter door. Since its a fire rat
NOTES: D3, D7, D11. Since the fire rated door has to maintain a minimunm distance of 915mm, it is considered
QTY UNIT ITEM CODE
6 Each 3090F
2 Pair TGDI-D300
2 Each 3101-1
1 Each 3124
2 Each 3108
3 Each 3090F
1 Each 3108
HARDWARE FOR SET: 8
DOORS: FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1
NOTES:
QTY UNIT ITEM CODE
3 Each 3090F
1 Pair TGDI-D300
1 Each PA bracket
1 Each 3108
2 Pair TGDI-D300
1 Each 3100-0
1 Each 3100-2
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 10
DOORS: D12, D12
NOTES:
QTY UNIT ITEM CODE
8 Each BB 4330
2 Pair TGDI-D300
2 Each PA bracket
1 Each 3100-0
1 Each 3100-2
1 Each 3124
2 Each 3108
2 Pair TGDI-D300
1 Each 3100-0
1 Each 3100-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 12
DOORS: D3
NOTES:
QTY UNIT ITEM CODE
6 Each BB 4330
2 Pair TGDI-D300
1 Each 3100-0
1 Each 3100-1
1 Each 3124
2 Each 3108
1 Pair TGDI-D300
NOTES:
QTY UNIT ITEM CODE
3 Each BB 4330
1 Pair TGDI-D300
1 Each 3108
1 Pair TGDI-D300
1 Each PA bracket
1 Each 3108
1 Pair TGDI-D300
1 Each 3108
HARDWARE FOR SET: 17
DOORS: D5, D5, D5, D5, D5, D4, D4, D8, D8, D8, D8, D8, D5, D8, D8, D8, D13, D5, D5, D5, D5, D5
NOTES:
QTY UNIT ITEM CODE
3 Each BB 4330
1 Each 3108
1 Each PA bracket
1 Each 3108
1 Each 3108
1 Pair TGDI-D300
1 Each 3020 - M
1 Each 3108
1 Pair TGDI-D300
1 Each PA bracket
1 Each 3020 - M
1 Each 3108
HARDWARE FOR SET: 22
DOORS: D4, D4, D4, D4
NOTES:
QTY UNIT ITEM CODE
3 Each BB 4330
1 Pair TGDI-D300
1 Each 3030 - F
1 Each 3108
1 Pair TGDI-D300
1 Each PA bracket
1 Each 3030 - F
1 Each 3108
1 Each 3020 - M
1 Each 4012
HARDWARE FOR SET: 25
DOORS: D4, D6
NOTES: Reinforcement is required for fixing the hinges.
QTY UNIT ITEM CODE
3 Each BB 4330
1 Each 3030 - F
1 Each 4012
1 Pair TGDI-D300
1 Each 3020 - M
1 Each 4012
1 Pair TGDI-D300
1 Each 3030 - F
1 Each 4012
HARDWARE FOR SET: 28
DOORS: NA, D4, NA, NA, NA, NA, NA, NA, NA, D4, D4, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6,
D6, D6, D6, D6, D6, D6, D6, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D
D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4
1 Each 4014
1 Each 4012
1 Each 4014
1 Each TS 90
1 Each 3040 - D
1 Each 4014
HARDWARE FOR SET: 32
DOORS: D6
NOTES:
QTY UNIT ITEM CODE
3 Each BB 4330
1 Each 4012
6 Each 3090F
1 Each 3525
1 Pair CR 6612
2 Pair TGDI-D300
2 Each PA bracket
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 34
DOORS: D2
NOTES: Since the door material is Mentioned as Metal in the floor plan-Legend. It is considered as Metal door.
QTY UNIT ITEM CODE
6 Each 3090F
1 Each 3515
1 Pair CR 6612
2 Pair TGDI-D300
2 Each 3101-1
1 Each 3124
2 Each 3108
6 Each 3090F
1 Each 3525
1 Pair CR 6612
2 Pair TGDI-D300
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 36
DOORS: D2, D2, D2
NOTES:
QTY UNIT ITEM CODE
6 Each BB 4330
1 Each 3101-1
1 Each 3124
2 Each 3108
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 38
DOORS: D2
NOTES:
QTY UNIT ITEM CODE
6 Each BB 4330
2 Each PA bracket
1 Each 3101-1
1 Each 3124
2 Each 3108
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 40
DOORS: D5, D2, D2, D2, D2, D2, D2, D2, D2, D2
NOTES:
QTY UNIT ITEM CODE
6 Each BB 4330
2 Each PA bracket
2 Each 3101-1
1 Each 3124
2 Each 3108
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 42
DOORS: D3, D3, D3, D7, D7, D7, D7
NOTES:
QTY UNIT ITEM CODE
3 Each BB 4330
1 Each 3108
1 Each 3108
2 Pair TGDI-H450
4 Each 3108
HARDWARE FOR SET: 45
DOORS: NA, D1
NOTES: By considering this as an entry location, Sliding door is specified.
QTY UNIT ITEM CODE
1 Each 3108
HARDWARE FOR SET: 47
DOORS: D2
NOTES:
QTY UNIT ITEM CODE
6 Each 3090F
1 Each PHT 05
2 Each 3101-1
1 Each 3124
2 Each 3108
HARDWARE FOR SET: 48
DOORS: NA, NA
NOTES: Turnstile
QTY UNIT ITEM CODE
, D2, D2
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 1 point panic device in Contur design on active leaf and 2 point modular on
inactive leaf, push bar for rebated double door. For fire and smoke check doors, with steel
latch, security anti thrust latch for door widths upto 1300mm, height upto 2270mm
consisting of 2 x 2102F, 2 x 2105, PHX 04 and PHX 03 in silver finish. As per EN 1125, CE
marked
External trim for PHA, PHB Panic Hardware for fire and smoke check doors. For max. 60mm
thick door prepared for euro profile cylinder. Silver finish.
DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length
42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 1 point panic device in Contur design on active leaf and 2 point modular on
inactive leaf, push bar for rebated double door. For fire and smoke check doors, with steel
latch, security anti thrust latch for door widths upto 1300mm, height upto 2270mm
consisting of 2 x 2102F, 2 x 2105, PHX 04 and PHX 03 in silver finish. As per EN 1125, CE
marked
External trim for PHA, PHB Panic Hardware for fire and smoke check doors. For max. 60mm
thick door prepared for euro profile cylinder. Silver finish.
DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length
42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
FD1, FD1, FD1
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 1 point panic device in Contur design, push bar for single door for fire and smoke
check doors, with steel latch, security anti thrust latch for door widths upto 1300mm,
consisting of 2102F, 2105 in silver finish. As per EN 1125, CE marked
External trim for PHA, PHB Panic Hardware for fire and smoke check doors. For max. 60mm
thick door prepared for euro profile cylinder. Silver finish.
DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length
42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
0, D10, D10, D10, D10, D10, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1
Door in Floor plan and Legend. It is considered as MT door Fire Rated and Non fire rated hardwares based on location and application.
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 288a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 70mm Length both side key operation & Escutcheons in SSS
Finish.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to
lift clear of the floor as soon as the door leaf is opened, suitable to be used on Fire and
smoke check doors, Seal Material = Silicon, Finish = Anodized Satin Clear, Length = 42"
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to
lift clear of the floor as soon as the door leaf is opened, suitable to be used on Fire and
smoke check doors, Seal Material = Silicon, Finish = Anodized Satin Clear, Length = 42"
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
Mortice dead lock 288a with 55mm backset, 20mm square forend and prepared for euro
profile cylinder including strike plate in satin stainless steel as per EN 12209, CE marked
DORMA 3515, 5 pin Euro profile knob cylinder with internal thumb turn and external key
operation standard length 70mm in satin nickel plated finish with 3 keys. Optional master
keying and grand master keying can be done on request. -NMK
CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin
stainless steel.
, D3, D3, D3, D3, D3, D3, D3, D3, D11, D3, D3, D3, D3, D3, D3, D3, D3
nd it is mentioned as Steel frame with Flush shutter door. Since its a fire rated cabin, Fire rated hardwares are specified for the mention
ed door has to maintain a minimunm distance of 915mm, it is considered as DLUE.
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 288a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 70mm Length both side key operation & Escutcheons in SSS
Finish.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to
lift clear of the floor as soon as the door leaf is opened, suitable to be used on Fire and
smoke check doors, Seal Material = Silicon, Finish = Anodized Satin Clear, Length = 17"
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 288a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 70mm Length both side key operation & Escutcheons in SSS
Finish.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
FD1, FD1, FD1
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 288a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 70mm Length both side key operation & Escutcheons in SSS
Finish.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Full plastic cover. Silver
finish. As per EN 1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin
chrome
DORMA lever action flush bolt with 19mm projecting bolt L=600 mm for wood door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin
chrome
DORMA lever action flush bolt with 19mm projecting bolt L=600 mm for wood door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D3, D3, D5, D3, D3, D3, D3, D3, D3, D11, D11, D11, D11, D11, D11, D3, D10, D10, D10, D10, D10, D10, D10, D10, D11, D3, D10, D10
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin
chrome
DORMA lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin
chrome
DORMA lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=920mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D4, D4, D5, D5, D5, D8, D8, D8, D8, D8, D4, D5, D8, D8, D8, D8, D8, D8, D8, D8, D8, D5, D5, D8, D8, D8, D8, D5, D4, D5, D5, D8, D8, D8
, D13, D13, D13, D5, D5, D13, D13, D13, D13, D13, D8, D8, D4, D5, D8, D8, D8, D8, D8, D8, NA, NA, D3, D3, D3
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D5
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D8, D8, D8, D8, D5, D8, D8, D8, D13, D5, D5, D5, D5, D5
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D3, D3
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Male sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
Male sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length internal thumb turn & external key operation
& Escutcheons in SSS Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Male sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
fixing the hinges.
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Male sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder
including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS
Finish
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
NA, NA, D4, D4, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D4A, D4A, D4A, D4A, D4
A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4A, D4, D4, D4, D4, D4, D4,
, D4, D4, D4, D4, D4
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
, D4
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length oneside thumb turn otherside coin release operation
DORMA 4014 Wall mounted door stop with coat hook in SSS finish
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 3 Package with Pair of Pure 8100 WC Design Lever Handle on Roses &
escutcheons 7122. Including 275a WC lock with 78mm CTC, 55mm Backset 20mm Square
forend.
DORMA GBDI D-600 Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel
Finish.
DORMA TS 90, cam action door closer with slide channel arm. Spring size EN 3/4 as per EN
1154 and CE marked. Silver finish.
Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded
corners in SS 304 satin stainless steel finish. Marking in black
DORMA 4014 Wall mounted door stop with coat hook in SSS finish
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses &
escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square
forend. EPC 60mm length both side key operation
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
Mortice dead lock 278a with 55mm backset, 20mm square forend an dprepared for euro
profile cylinder including strike plate in satin stainless steel as per EN 12209.
DORMA 3525, 5 pin Euro profile cylinder with both side key operation standard length
70mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin
stainless steel.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
ntioned as Metal in the floor plan-Legend. It is considered as Metal door.
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
Mortice dead lock 278a with 55mm backset, 20mm square forend an dprepared for euro
profile cylinder including strike plate in satin stainless steel as per EN 12209.
DORMA 3515, 5 pin Euro profile knob cylinder with internal thumb turn and external key
operation standard length 70mm in satin nickel plated finish with 3 keys. Optional master
keying and grand master keying can be done on request. -NMK
CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin
stainless steel.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D1, D2, D2, D2, D2, D2, D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2
ntioned as Metal in the floor plan-Legend. It is considered as Metal door.
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
Mortice dead lock 278a with 55mm backset, 20mm square forend an dprepared for euro
profile cylinder including strike plate in satin stainless steel as per EN 12209.
DORMA 3525, 5 pin Euro profile cylinder with both side key operation standard length
70mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin
stainless steel.
DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with
raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=1063mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D2, D2, D2, D2, D2, D2, D2, D2, D9, D9, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D9, D9, D2, D9, D2, D2, D2, D2, D2, D2, D9, D2
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
, D2, D2
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length internal thumb turn &
external key operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length internal thumb turn &
external key operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
Standard Bottom Patch Fitting
Standard Top Patch Fitting
Standard Top Pivot
Standard Lock with Strike plate & EPC
DORMA floor spring BTS 75V EN 1-4 with std. spindle and cover plate. The floor spring with
backcheck and adjustable closing speed from 175°. With 90° hold open. As per EN 1154.
(not suitable for fire doors) Finish: Satin stainless steel. Application - Glass Doors
DORMA pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable fixing for glass,
wood and metal doors in satin stainless steel. The pull handles should have supporting
washer with raised bevelling on the outer surface. Length =450mm, 25mm dia, -SS304
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
location, Sliding door is specified.
DESCRIPTION
Providing and fixing Automatic Sliding door operator, Make: DORMA ES 200 STD 6250,
compliant with future European standards and produced according to the guidelines for
power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations.
TÜV design tested, tested according to the low voltage guidelines, fulfils DIN 18650
standards, for framed glass door application with DORMA ST-Flex Profiles Systems,
modular design including internal cover and with 15.52 mm Laminated glass for 2 Nos
sliding door panels and 2 Nos fixed panels, both sliding & fixed panels with DORMA ST-Flex
framed profile system with Interlocking Seals.Operator & Frame Finish should be Silver
Anodised E6/C0, with operator dimensions (H x D) : 100 x 180 mm and of length as
required to suit the opening size given below. The track profile should be separate from the
main profile for enabling reduction in vibration insulation. Microprocessor-controlled
control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-
open time and opening and closing force, reversing when obstruction is encountered, Class
of protection IP 20. Activators- DORMA Prosecure Opti Combi 1 Sensor System (02 Nos),
Light barriers, comprising receiver and transmitter - 02 Pair with Electro-mechanical
locking, Bistable, Program Switch with Key. Max Panel Weight Carrying Capacity of 2 X 160
Kgs. The system shall have constant power supply 230V+ 5%, 50Hz, AC . The requirement
in total is as mentioned below:
DESCRIPTION
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in
SSS finish. Suitable for door weights upto 120kgs. Template Drilled
DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared
for euro profile cylinder including strike plate and EPC 70mm Length both side key
operation & FT Narrow Profile Escutcheons in satin stainless steel Finish.
DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for
glass, wood and metal doors in satin stainless steel. The pull handles should have
supporting washer with raised bevelling on the outer surface. Length =350mm, 25mm dia,
-SS316
DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two
independent closing valves and latching speed adjustable by arm. Silver finish. As per EN
1154.
Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring
loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap
13mm. Finish: Anadoised satin clear. L=920mm
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin
stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA 1 point panic device in Contur design, push bar for single door for fire and smoke
check doors, with steel latch, security anti thrust latch for door widths upto 1300mm,
consisting of 2102F, 2105 in silver finish. As per EN 1125, CE marked
External trim for PHA, PHB Panic Hardware for fire and smoke check doors. For max. 60mm
thick door prepared for euro profile cylinder. Silver finish.
DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length
42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master
keying can be done on request. -NMK
DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin
chrome
DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin
chrome
Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames,
self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to
lift clear of the floor as soon as the door leaf is opened, suitable to be used on Fire and
smoke check doors, Seal Material = Silicon, Finish = Anodized Satin Clear, Length = 17"
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to
lift clear of the floor as soon as the door leaf is opened, suitable to be used on Fire and
smoke check doors, Seal Material = Silicon, Finish = Anodized Satin Clear, Length = 42"
DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
DESCRIPTION
Kerberos -TPB E01 TYPE 2
Construction:
Half Height Tripod Turnstile: Motorized Tripod Turnstile with 3 X 120 deg. made of AISI 304
semi-gloss stainless steel. Base columns are empty and can be used to integrate
components provided by the customer. The rotary head and other electrical and
mechanical components are integrated in the centre housing. In case of multiple
installations, the housing unit acts as a guiding element – additional guiding bars are not
required. To improve personal safety, standards and guidelines relating to points where
body parts could get pinched or squashed have been taken into account in the
development of the tripod barrier (Machinery Directive 98/37/EC). The unit also has a type-
examination in accordance with DIN 18650 (safety for automatic doors). Suitable for use in
emergency and escape routes – see emergency and escape route module option
The tripod barrier is equipped with a servo-positioning drive (low energy drive) and is
electrically controlled in both directions. Through a release impulse for the entry or exit
direction, the selected rotation direction is released. Maintenance counter and with
provision to for display in case if required
Tooth clutch 24 VDC Always open in case of normal operation: no unlocking noise, saves
energy, minimum wear Locks only in case of unpermitted pushing Unlocks even under
pressure
Microprocessor controlled control unit ETS
Standard measurements:
Usable bar length: 510 mm
Width: 770 mm
Height: 1,020 mm
Depth: 1,170 mm
Electrical system:
The control unit and power supply unit are integrated into the unit. Power supply 110 -
230V AC 50/60 Hz. The units with aggregate type 2 can be networked to one another.
DESCRIPTION
Kaba half-height swing door Charon HSD-E01
Standard measurements: Leaf radius: 900 mm, Leaf upper edge: 900 mm
Construction:
Tubular column with U-shaped blocking element made of stainless steel AISI 304
Ø 140 mm. The locking, drive and toothed holding brake are built into the tubular
column. To improve personal safety, standards and guidelines relating to points
where body parts could get pinched or squashed have been taken into account in
the development of the swing door (Machinery Directive 98/37/EC). The unit also
has a type-examination in accordance with DIN 18650 (safety for automatic doors).
With additional equipment, the unit is suitable for use in emergency and escape
routes – see “Emergency and escape route module" option).
Finish:
Stainless steel semi-gloss smooth finish AISI 304.
Function: Aggregate type 2
The swing door is equipped with a servo positioning drive (low energy drive with
energy content <1.6 joule) and is electrically controlled in both directions. Through
a release impulse for the entry or exit direction, the selected rotation direction is
opened by a motor-driven system. After an adjustable time, the swing door
automatically locks again in the home position. In case of unauthorised access, the
swing door locks automatically. After a short time, the swing door releases and
moves into the home position again. In case of power failure, both directions may
beaccessed freely. Automatic reset after power restoration – the unit resets to its
regular function without manual intervention. The access area is secured
immediately after power restoration. The unit can be locked in any position and
opens under load (personal safety in case of panic). In home position, the unit is
unlocked to minimise power consumption.Since the drive and the locking devices are
mechanically separated, low energydrives can be used to provide personal protection. On
the other hand, high lockingforces can be used to prevent unauthorised passage through
the unit. Parameterscan be set for unit behaviour and each specific customer.
MCBF (mean cycles between failure) is 2 million.
Electrical system:
The control unit and power supply unit are in the external control box (H = 283 mm /
W = 168 mm / D = 115 mm). Power supply 110 - 230 VAC 50/60 Hz. Maximal cable
length: 50 m.
Three floating messages (closer and opener) for type 2: Rotation message entry,
rotation message exit, message ready.
Installation:
The swing door is dowelled at finished floor level FFL and is suitable for outdoor
installation.
Components conducting supply voltage: IP 54
SUPPLIER FINISH
DORMA SSS
DORMA Silver
DORMA Silver
Dorma SNP
DORMA Silver
Raven Black
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA Silver
DORMA Silver
Dorma SNP
DORMA Silver
DORMA Silver
Raven Black
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA Silver
DORMA Silver
Dorma SNP
DORMA Silver
Aluminium
Raven Anodized
Raven Black
DORMA SC
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
Raven Black
Anodized
Raven Aluminium
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
DORMA SC
Raven Black
Anodized
Raven Aluminium
DORMA SC
SSS
SNP
SSS
d hardwares are specified for the mentioned door Codes
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
Anodized
Raven Aluminium
Aluminium
Raven Anodized
DORMA SC
Black
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
Raven Black
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
Raven Black
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
Raven Black
Aluminium
Raven Anodized
DORMA SC
D8, D8, D8, D8, D5, D4, D5, D5, D8, D8, D8, D8, D8, D8,
A, NA, D3, D3, D3
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA Silver
DORMA SC
SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SSS
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SSS
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SSS
6, D6, D6, D6, D6, D4A, D4A, D4A, D4A, D4A, D4A, D4A,
A, D4A, D4A, D4A, D4, D4, D4, D4, D4, D4, D4, D4, D4,
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SSS
SUPPLIER FINISH
DORMA SSS
DORMA SSS
Dorma SNP
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
Dorma SNP
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
Dorma SNP
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
DORMA SC
Aluminium
Raven Anodized
DORMA SC
D9, D2, D9, D2, D2, D2, D2, D2, D2, D9, D2, D2, D2, D2,
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
DORMA SC
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
DORMA SC
SUPPLIER FINISH
Dorma SSS
Dorma SSS
Dorma SSS
Dorma SSS
DORMA SSS
DORMA SSS
DORMA SC
SUPPLIER FINISH
SUPPLIER FINISH
DORMA SSS
DORMA SSS
DORMA SSS
DORMA Silver
Aluminium
Raven Anodized
DORMA SC
SUPPLIER FINISH
DORMA SSS
DORMA Silver
DORMA Silver
Dorma SNP
DORMA SC
DORMA SC
Raven Black
Anodized
Raven Aluminium
Anodized
Raven Aluminium
DORMA SC
SUPPLIER FINISH
Kaba SS
SUPPLIER FINISH
Kaba SS
PROJECT: 15732 - BHARAT ELECTRONICS LIMITED v 1
REVISION DATE 2018-11-30 10:08
1 3090F
2 BB 4330
5 PHT 05
288A TYPE 1
9 PACKAGE(70 mm EPC)
17 3515
18 3525
TG 9356 Length-
19
350mm
20 GBDI D-600
21 TGDI-D300
22 TGDI-H450
23 CR 6612
24 TS 90
27 PA bracket
29 3020 - M
30 3030 - F
31 3040 - D
32 3101-1
33 3100-0
34 3100-1
35 3100-2
36 3124
39 RP 8Si - 36"
40 RP 8Si - 42"
41 RP 38Si - 17"
42 RP 38Si - 42"
43 4014
44 4012
45 3108
46 PT 10
47 PT 20
48 PT 24
49 US10
PRODUCT
DORMA DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin stainless steel. As per
EN 1935, CE Marked. Suitable for door weights upto 120kgs.
DORMA DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable
for door weights upto 120kgs. Template Drilled
DORMA DORMA 1 point panic device in Contur design on active leaf and 2 point modular on inactive leaf, push bar for
rebated double door. For fire and smoke check doors, with steel latch, security anti thrust latch for door widths upto
1300mm, height upto 2270mm consisting of 2 x 2102F, 2 x 2105, PHX 04 and PHX 03 in silver finish. As per EN 1125, CE
marked
DORMA DORMA 1 point panic device in Contur design, push bar for single door for fire and smoke check doors, with
steel latch, security anti thrust latch for door widths upto 1300mm, consisting of 2102F, 2105 in silver finish. As per EN
1125, CE marked
DORMA External trim for PHA, PHB Panic Hardware for fire and smoke check doors. For max. 60mm thick door prepared
for euro profile cylinder. Silver finish.
Mortice dead lock 288a with 55mm backset, 20mm square forend and prepared for euro profile cylinder including
strike plate in satin stainless steel as per EN 12209, CE marked
DORMA Mortice dead lock 278a with 55mm backset, 20mm square forend an dprepared for euro profile cylinder
including strike plate in satin stainless steel as per EN 12209.
DORMA DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder including strike
plate. and EPC 60mm Length both side key operation & Escutcheons in SSS Finish
DORMA DORMA 288a with 55mm backset, 20mm square forend prepared for euro profile cylinder including strike
plate. and EPC 70mm Length both side key operation & Escutcheons in SSS Finish.
DORMA DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder including strike
plate. and EPC 60mm Length internal thumb turn & external key operation & Escutcheons in SSS Finish
DORMA DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared for euro profile
cylinder including strike plate and EPC 70mm Length both side key operation & FT Narrow Profile Escutcheons in satin
stainless steel Finish.
DORMA DORMA 917 Narrow stile bolt dead lock with 25mm backset, 24mm sq. forend, prepared for euro profile
cylinder including strike plate and EPC 70mm Length internal thumb turn & external key operation & FT Narrow Profile
Escutcheons in satin stainless steel Finish.
DORMA Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a
Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length oneside thumb turn otherside coin
release operation
DORMA Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a
Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length both side key operation
DORMA Pure 8100 Type 3 Package with Pair of Pure 8100 WC Design Lever Handle on Roses & escutcheons 7122.
Including 275a WC lock with 78mm CTC, 55mm Backset 20mm Square forend.
Dorma DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length 42mm in satin nickel
plated finish with 3 keys. Optional master keying and grand master keying can be done on request. -NMK
DORMA 3515, 5 pin Euro profile knob cylinder with internal thumb turn and external key operation standard length
70mm in satin nickel plated finish with 3 keys. Optional master keying and grand master keying can be done on request.
-NMK
Dorma DORMA 3525, 5 pin Euro profile cylinder with both side key operation standard length 70mm in satin nickel
plated finish with 3 keys. Optional master keying and grand master keying can be done on request. -NMK
DORMA DORMA pull Handle TG 9356 350mm back to back Offset pull handle, adjustable fixing for glass, wood and
metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer
surface. Length =350mm, 25mm dia, -SS316
DORMA DORMA GBDI D-600 Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finish.
DORMA DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin
stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length
=300mm, 22mm dia, -SS304
DORMA DORMA pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable fixing for glass, wood and metal
doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface.
Length =450mm, 25mm dia, -SS304
CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel.
DORMA DORMA TS 90, cam action door closer with slide channel arm. Spring size EN 3/4 as per EN 1154 and CE
marked. Silver finish.
DORMA DORMA rack and pinion door closer TS 71 EN size 3/4, with std. arm and with two independent closing valves
and latching speed adjustable by arm. Full plastic cover. Silver finish. As per EN 1154.
DORMA DORMA rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves
and latching speed adjustable by arm. Silver finish. As per EN 1154.
DORMA DORMA Parallel arm bracket suitable for Rack & Pinion door closer. Silver
DORMA DORMA floor spring BTS 75V EN 1-4 with std. spindle and cover plate. The floor spring with backcheck and
adjustable closing speed from 175°. With 90° hold open. As per EN 1154. (not suitable for fire doors) Finish: Satin
stainless steel. Application - Glass Doors
DORMA Male sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304
satin stainless steel finish. Marking in black
DORMA Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304
satin stainless steel finish. Marking in black
DORMA Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304
satin stainless steel finish. Marking in black
DORMA DORMA lever action flush bolt with 19mm projecting bolt L=300mm for Metal door in satin chrome
DORMA DORMA lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin chrome
DORMA DORMA lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome
DORMA DORMA lever action flush bolt with 19mm projecting bolt L=600 mm for wood door in satin chrome
DORMA DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin chrome
Raven Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames, self adhesive, Finish =
Black, Length = 1 x 1000mm, Height- 2 x 2750mm
Raven Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames, self adhesive, Finish =
Black, Length = 1 x 2000mm, Height- 2 x 2750mm
Raven Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring loaded to lift clear of
the floor. Concealed mounted in a 15mm x 34mm groove. Max gap 13mm. Finish: Anadoised satin clear. L=920mm
Raven Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring loaded to lift clear of
the floor. Concealed mounted in a 15mm x 34mm groove. Max gap 13mm. Finish: Anadoised satin clear. L=1063mm
Raven RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to lift clear of the floor
as soon as the door leaf is opened, suitable to be used on Fire and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 17"
Raven RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face Mounted Version, spring loaded to lift clear of the floor
as soon as the door leaf is opened, suitable to be used on Fire and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 42"
DORMA DORMA 4014 Wall mounted door stop with coat hook in SSS finish
DORMA DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories
DORMA DORMA floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
Providing and fixing Automatic Sliding door operator, Make: DORMA ES 200 STD 6250, compliant with future European
standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV
and the VDE regulations. TÜV design tested, tested according to the low voltage guidelines, fulfils DIN 18650 standards,
for framed glass door application with DORMA ST-Flex Profiles Systems, modular design including internal cover and
with 15.52 mm Laminated glass for 2 Nos sliding door panels and 2 Nos fixed panels, both sliding & fixed panels with
DORMA ST-Flex framed profile system with Interlocking Seals.Operator & Frame Finish should be Silver Anodised E6/C0,
with operator dimensions (H x D) : 100 x 180 mm and of length as required to suit the opening size given below. The
track profile should be separate from the main profile for enabling reduction in vibration insulation. Microprocessor-
controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time and
opening and closing force, reversing when obstruction is encountered, Class of protection IP 20. Activators- DORMA
Prosecure Opti Combi 1 Sensor System (02 Nos), Light barriers, comprising receiver and transmitter - 02 Pair with
Electro-mechanical locking, Bistable, Program Switch with Key. Max Panel Weight Carrying Capacity of 2 X 160 Kgs. The
system shall have constant power supply 230V+ 5%, 50Hz, AC . The requirement in total is as mentioned below:
Kerberos -TPB E01 TYPE 2
Construction:
Half Height Tripod Turnstile: Motorized Tripod Turnstile with 3 X 120 deg. made of AISI 304 semi-gloss stainless steel.
Base columns are empty and can be used to integrate components provided by the customer. The rotary head and other
electrical and mechanical components are integrated in the centre housing. In case of multiple installations, the housing
unit acts as a guiding element – additional guiding bars are not required. To improve personal safety, standards and
guidelines relating to points where body parts could get pinched or squashed have been taken into account in the
development of the tripod barrier (Machinery Directive 98/37/EC). The unit also has a type-examination in accordance
with DIN 18650 (safety for automatic doors). Suitable for use in emergency and escape routes – see emergency and
escape route module option
The tripod barrier is equipped with a servo-positioning drive (low energy drive) and is electrically controlled in both
directions. Through a release impulse for the entry or exit direction, the selected rotation direction is released.
Maintenance counter and with provision to for display in case if required
Tooth clutch 24 VDC Always open in case of normal operation: no unlocking noise, saves energy, minimum wear Locks
only in case of unpermitted pushing Unlocks even under pressure
Microprocessor controlled control unit ETS
Standard measurements:
Usable bar length: 510 mm
Width: 770 mm
Height: 1,020 mm
Depth: 1,170 mm
Electrical system:
The control unit and power supply unit are integrated into the unit. Power supply 110 - 230V AC 50/60 Hz. The units
with aggregate type 2 can be networked to one another.
Each 771
Each 1690
Set 13
Set 10
Each 23
Each 4
Each 48
Set 153
Set 64
Set 26
Set 80
Set 17
Set 9
Set 42
Set 109
Each 23
Each 5
Each 47
Pair 180
Each 34
Pair 438
Pair 4
Pair 52
Each 17
Each 134
Each 536
Each 76
Set 4
Each 27
Each 27
Each 17
Each 372
Each 39
Each 35
Each 4
Each 227
Each 22
Each 70
Each 3
Each 80
Each 26
Each 63
Each 118
Each 43
Each 662
Each 4
Each 4
Each 4
Each 4
Set 2
Each 17
7-Dec-18
Project Name:
Consultant / Architect:
General Notes:
10
11
12
BHARAT ELECTRONICS LIMITED
dware Schedule
All the hardware fastening area in the shutter/frame should have proper reinforcement for the proper
fixing of ironmongery.
Please provide the neccessary details, for providing Master keying system if required.
Since the thickness of the door is not given .Hence fire rated metal door 45mm , for glass door 12mm and
aluminium framed glass door thickness is considered as 45mm and for Wooden door is 40mm.
The Door joinery specification is prepared keeping in mind the following points (a) Area of Application (b)
Fire Rated/Non Fire Rated & (c) Door Dimensions (Width/Height/Thickness).
Double Leaf Sliding door with ST Flex is specified for Entry doors.
For the fire Rated cabins i.e : UPS , AHU, ELECTRICAL, SERVER ROOM are specified with Fire Rated
Hardwares.
Since it is mentioned as Metal Door in Floor plan and Legend. It is considered as MT door Fire Rated and
Non fire rated hardwares based on location and application for the Hardware set No-04
As per the floor plan and legend it is mentioned as Steel frame with Flush shutter door. Since its a fire
rated cabin, Fire rated hardwares are specified for the mentioned door Codes D3, D7, D11 in Hardware
set No-06
Since the fire rated door has to maintain a minimunm distance of 915mm, it is considered as DLUE. For
door Codes D3, D7, D11 in Hardware set No-06
Since the Nitrogen is a flammable material, Fire rated Hardware set is specified for Door code D13.
Hardware set No-07
Reinforcement is required for fixing the hinges on FRP Doors in WC Toilet and Aluminium Framed Glazed
Doors. AL/GD
For the Door No 314 in CONTROL LIST Tab is shown as Revolving door as an internal application. It is not
in our scope.
Hardware Set: 48Turnstile is given with option of Kerberos -TPB E01 TYPE 2 & Kaba half-height
swing door Charon HSD-E01
The attached Ironmongery Schedule & Specification is for initial discussion, kindly review the same & we
shall discuss on it for further changes/clarifications wrt to Product Design, Product Inclusion/Exclusion.