Académique Documents
Professionnel Documents
Culture Documents
DVD Player
DP546
2 Getting Started
Safety Information
CAUTION CAUTION: This product employs a Laser System.
1 RISK OF ELECTRIC SHOCK To ensure proper use of this product, please read
DO NOT OPEN
Getting Started
Getting Started
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, DVDs, CDs and other
materials may subject you to civil and/or criminal
liability.
4 Getting Started
Notes on Discs
yy Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
1 the disc.
yy After playing, store the disc in its case. Do not
Getting Started
Table of Contents
1
1 Getting Started 4 Operating
2 Safety Information 15 General Playback
6 Introduction 15 – Playing a Disc
6 – About the “7” Symbol Display 15 – Playing a File
6 – Symbols Used in this Manual 15 – On-Screen Display
2
6 – Supplied Accessories 16 – General Operation
6 – Playable Discs 16 Advanced Playback
6 – Regional Code 16 – Movie
7 – File Compatibility 17 – Music
3
8 Remote Control 18 – Photo
9 Front Panel
9 Rear Panel
5 Troubleshooting
19 Troubleshooting 4
2 Connecting
10 Connecting to your TV
10 – Connecting Video / Audio Cable
6 Appendix
10 – Connecting Component Video Cable 20 Area Code List
10 Connecting to an Amplifier 21 Language Code List 5
10 – Connecting Audio Cable 22 Specifications
11 – Connecting COAXIAL (digital audio) 22 Trademarks and Licenses
Cable
11 – Connecting 5.1 CH Audio Cables
6
3 System Setting
12 Settings
12 – Adjust the Setup Settings
12 – [LANGUAGE] Menu
12 – [DISPLAY] Menu
13 – [AUDIO] Menu
14 – [LOCK] Menu
14 – [OTHERS] Menu
6 Getting Started
DVD±R
operation and indicates that the function explained
in this owner’s manual is not available on that -- Video mode and finalized only
specific media. -- Supports the dual layer disc also
-- DVD±R discs that contain Video,
Symbols Used in this Manual Audio or Photo files.
A section whose title has one of the following DVD-RW
symbols are applicable only to the disc or file -- VR mode, Video mode and
represented by the symbol. finalized only
,,Note
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the players when formatting
RCA Video/Audio cable Remote control (1) rewritable discs. When setting the option
(1) to Live System, you cannot use it on player.
(Mastered/Live File System: Disc format system
for windows Vista)
Regional Code
Battery (1) This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
Getting Started 7
Getting Started
yy The file name is limited to 20 characters. Notes of USB Device
yy Depending on the size and number of the files, yy This unit supports USB device with FAT16 or
it may take several minutes to read the contents FAT32 format.
on the media. yy Do not extract the USB device during operation
Maximum Files/Folder: Less than 600 (total (play, etc.).
number of files and folders) yy A USB device which requires additional program
CD-R/RW, DVD±R/RW Format: ISO 9660+JOLIET installation when you have connected it to a
computer, is not supported.
Video Files yy USB device: USB device that supports USB1.1
and USB2.0.
Available resolution size: 720 x 576 (W x H) pixels
yy Movie, music and photo files can be played. For
Playable subtitle: SubRip (.srt/.txt), SAMI (.smi), details of operations on each file, refer to relevant
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/ pages.
.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt) yy Regular back up is recommended to prevent
data loss.
Playable Codec format:
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, yy If you use a USB extension cable, USB HUB, USB
“DIVX6.xx” (Standard playback only), Multi-reader, or External HDD, the USB device
“MP43”, “3IVX” may not be recognized.
Playable Audio format: “Dolby Digital”, ”PCM”, yy Some USB device may not work with this unit.
“MP3”, “WMA” yy Digital camera and mobile phone are not
Sampling frequency: within 8 to 48 kHz (MP3), supported.
within 32 to 48 kHz (WMA) yy USB Port of the unit cannot be connected to PC.
Bit rate (MP3/WMA/DivX): within 8 to 320 kbps The unit cannot be used as a storage device.
(MP3), within 32 to 192 kbps (WMA), less than 4
Mbps (DivX)
,,Note
This unit does not support files that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Audio Files
Sampling frequency: within 8 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
Bit rate: within 8 to 320 kbps (MP3), within 32 to
192 kbps (WMA)
8 Getting Started
Remote Control
• • • • • • • • • • c• • • • • • • • • • •
1 DVD MENU: Accesses or exits the DVD menu.
Getting Started
?
• • • • • • • • • • d• • • • • • • • • • •
A-B: Repeats a section.
REPEAT: Repeats a chapter, track, title or all.
ZOOM: Enlarges video image.
• • • • • • • • • • a• • • • • • • • • • • ?: This button is unavailable.
POWER (1): Switches the unit ON or OFF.
OPEN/CLOSE (B): Opens and closes the disc tray. Battery Installation
Numerical buttons: Selects numbered items in a Remove the battery cover on the rear of the Remote
menu. Control, and insert R03 (size AAA) battery with 4
CLEAR: Removes a track number on the Program and 5 matched correctly.
List.
PROGRAM: Enters the program edit mode.
• • • • • • • • • • b• • • • • • • • • • •
SCAN (c/v): Searches backward or forward.
SKIP (C/V): Goes to the next or previous
chapter / track / file.
PAUSE/STEP (M): Pauses playback.
PLAY (z): Starts playback.
STOP (Z): Stops playback.
Getting Started 9
Front Panel
Getting Started
ͦ ͧ g
Rear Panel
a bcd e f
VIDEO
R WOOFER R DIGITAL Y PR
5.1ch AUDIO OUT AUDIO OUT AUDIO VIDEO OUT
g h
VIDEO VIDEO
Amplifier/
Receiver
VIDEO IN TV
VIDEO
R WOOFER R DIGITAL Y PR
5.1ch AUDIO OUT AUDIO OUT AUDIO VIDEO OUT
VIDEO IN TV
VIDEO
R WOOFER R DIGITAL Y PR
Rear of the Unit
5.1ch AUDIO OUT AUDIO OUT AUDIO VIDEO OUT
Connecting
R WOOFER R DIGITAL Y PR
5.1ch AUDIO OUT AUDIO OUT AUDIO VIDEO OUT
Coaxial Cable
Amplifier/
Receiver Audio
Cable Audio
OPTICAL
Cable
yy If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu. FRONT R FRONT L SUBWOOFER
ER
and MPEG decoder, set the [Dolby Digital] and ANALOG 5.1CH AUDIO INPUT
Receiver /
[MPEG] options to [PCM] on the setup menu. Amplifier
Dolby Digital / DTS / MPEG [2 Ch]: Selects when 2 Channel stereo system
is connected to this unit.
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack. [5.1 Ch]: Selects when 5.1 Channel surround
system is connected to this unit
[Bitstream]: Select to connect DIGITAL AUDIO
OUT jack to an amplifier with Dolby Digital, DTS
After selecting [5.1 Ch], you can set the 5.1 Ch
or MPEG decoder.
speaker setup options. Press w/s to select an
[PCM] (for Dolby Digital / MPEG): Select option then press a/d to adjust the setting.
to connect DIGITAL AUDIO OUT jack to an
amplifier without Dolby Digital or MPEG [Speaker]: Select a speaker that you want to
decoder. adjust.
3
[Off] (for DTS): Select to connect DIGITAL [Size]: Select a size of the selected speaker.
System Setting
AUDIO OUT jack to an amplifier without DTS (Large, Small) A size cannot be selected
decoder. depending on the selected speaker.
[Volume]: Adjust the output level of the
Sample Freq. (Frequency) selected speaker. (-10 dB - 0 dB).
Selects the sampling frequency of the audio signal [Distance]: Select a distance to each speaker
between [48 kHz] and [96 kHz]. from the listening position. You cannot adjust
Sub Woofer speakers. (1 m(3.28 ft) - 6.0 m
(19.7 ft))
[Test]: Select [All], a test signal is sent to each
speaker. During testing, you can select a
speaker and adjust volume setting. Select [off ]
to stop the test.
Vocal
Set to [On] only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc mix
into normal stereo sound.
14 System Setting
Sets or changes the password for lock settings. Corporation. This is an official DivX Certified®
device that has passed rigorous testing to verify
Area Code that it plays DivX video. Visit divx.com for more
To input the standardized area code referring the information and software tools to convert your files
Area Code List on page 20. into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
Operating 15
For the Audio CD, select a track using w/s/ Current title number/total
a/d, and press PLAY (z) or ENTER (b) to number of titles
play the track.
Current chapter number/total
number of chapters
Playing a File yui
Elapsed playing time
1. Press OPEN/CLOSE (B) to place a disc on the Selected total time of current
disc tray, or connect the USB device. title/file
2. Select a file using w/s/a/d, and press PLAY
(z) or ENTER (b) to play the file.
Selected audio language or 4
channel
Operating
RETURN (x) Changes between Disc and
USB Device. Selected subtitle
system mode for your TV system. Set the desired Searches for the starting point of
Remove any disc that might starting time of entered time code. Press DISPLAY
be in the unit, press and hold playback then select clock icon. Enter a
PAUSE/STEP (M) for more than time then press ENTER (b).
five seconds to be able to select For example, to find a scene
a system. (PAL, NTSC) at 1 hour, 10 minutes, and 20
Screen Saver Leave the unit in Stop mode for seconds, enter “11020” and press
about five minutes, then the ENTER (b).
screen saver appears. If you enter the wrong number,
If the Screen Saver is displayed press CLEAR to enter again.
for five minutes, the unit auto- Change the Press and hold SUBTITLE for 3
matically turns itself off. subtitle code seconds during playback. The
Last Scene Turn off the unit, then the unit page language code will appear.
Memory memorize the lastly viewed (Video file only) Press a or d to select another
scene even if disc is inserted language code until the subtitle
again after removal or unit is is displayed properly and then
turned on after off with same press ENTER (b)
disc. (DVD/ Audio CD only) Slow down the While the playback is paused,
Volume Control You can control the sound vol- playing speed press v repeatedly to play
ume as the AUDIO OUTPUT jack (Forward only) various speeds of slow motion.
on the unit is connected. Press Press PLAY (z) to continue play
and hold AUDIO([) for 3 sec- at normal speed.
onds during normal playback. Watch an During playback or pause mode,
The control bar will appear. Press enlarged video press ZOOM repeatedly to select
a/d to adjust. zoom mode.
The adjusted volume is not
memorized after power-off. ZOOM: 100% : 200% : 300%
: 400% : 100%
w/s/a/d: Move through the
zoomed picture.
Operating 17
Music tu ,,Note
yy If you use this function, the “CD_REC” folder
To Do this will be created automatically in the USB
Play Press REPEAT during playback. Flash Drive then the music file(s) is saved in
repeatedly To select an item to be repeated, it.
Press REPEAT repeatedly. yy If you remove USB Flash Drive, turn off or
yy Track/ ALL/ (REPEAT Off ) open the unit while recording, it can make a
malfunction.
Create or Press the PROGRAM to select
delete your desired file and then, { mark yy If the remaining space on the USB Flash
own program appears on screen. Drive is insufficient, the recording is not
available. To increase the free space, delete
Using w/s and ENTER (b) files in it using your PC.
to add a music file(s) on the
program list, yy CD-G disc and Audio CDs encoded in DTS
cannot be recorded.
If you add desired music file(s),
press PROGRAM to end edit yy External HDD, Multi Card reader, Multi
program list. Partition USB, Locked device and MP3 player
are not supported.
To clear a music file(s) from the
program list, select the music yy You can set the recording speed pressing
file you want to clear then press AUDIO during USB direct recording.
CLEAR in program edit mode. -- X1 Track: While normal speed recording, 4
To clear all music file(s) from the you can listen to the music.
Operating
program list, select [Clear All] -- X4 Track: While 4X speed recording,
then press ENTER (b) in program you can not listen to the music.
edit mode. yy Recording format: MP3 file
Display file While playing a MP3 file yy Encoding Bit rate: 128 Kbps / 160 Kbps / 192
information containing file information, you Kbps / 256 Kbps / 320 Kbps
(ID3 TAG) can display the information by
pressing DISPLAY repeatedly.
yy Depending on the MP3 files,
information may not be The making of unauthorized copies of copy-
displayed on the screen. protected material, including computer
programs, files, broadcasts and sound
Record the Connect USB Flash Drive to the recordings, may be an infringement of
Audio CD to unit before recording. copyrights and constitute a criminal offense.
USB device Insert an Audio CD, and then This equipment should not be used for such
select a track using w/s, DVD purposes.
MENU, or numerical buttons. Be responsible
yy For track recording: Press Respect copyrights
AUDIO([) in play, pause or
resume stop mode.
yy For all track recording: Press
AUDIO([) in complete stop
mode.
yy For program list recording: In
stop mode, press AUDIO([)
after selecting a track on the
program list.
18 Operating
Photo i
To Do this
View photo Use w/s/a/d to highlight
files as a slide (`) icon then press ENTER (b)
show to start slide show.
Adjust slide You can change slide show
show speed speed using a/d when (J)
icon is highlighted.
Rotate a photo Use w/s to rotate the photo in
full screen counterclockwise or
clockwise while viewing a photo
in full screen.
Watch an While viewing a photo in full
enlarged Photo screen, press ZOOM repeatedly
to select zoom mode.
ZOOM: 100% : 200% : 300%
: 400% : 100%
w/s/a/d: Move through the
4 zoomed photo.
Listen to music You can listen to music during
Operating
Troubleshooting 19
Troubleshooting
Troubleshooting
The video cable is not Connect the video cable securely.
connected securely.
No sound The equipment connected with Select the correct input mode of the audio
the audio cable is not set to amplifier.
receive the signal from the unit.
The AUDIO options are set to Set the AUDIO settings to the correct
the wrong position. position.
20 Appendix
Appendix
Danish 6865 Kazakh 7575 Russian 8285 Volapük 8679
Dutch 7876 Kirghiz 7589 Samoan 8377 Welsh 6789
English 6978 Korean 7579 Sanskrit 8365 Wolof 8779
Esperanto 6979 Kurdish 7585 Scots Gaelic 7168 Xhosa 8872
Estonian 6984 Laotian 7679 Serbian 8382 Yiddish 7473
Faroese 7079 Latin 7665 Serbo-Croatian 8372 Yoruba 8979
Fiji 7074 Latvian, Lettish 7686 Shona 8378 Zulu 9085
Finnish 7073 Lingala 7678
22 Appendix