67%(15)67% ont trouvé ce document utile (15 votes)
50K vues3 pages
Watch withstands water pressure to 60 p.s.i.a. (equals immersion to 98 feet or 30 meters below sea level) acquaint yourself with the location of the four buttons that operate the watch. For $5, Timex will extend the enclosed one year limited manufacturer's warranty for an additional 4 years from date of purchase.
Watch withstands water pressure to 60 p.s.i.a. (equals immersion to 98 feet or 30 meters below sea level) acquaint yourself with the location of the four buttons that operate the watch. For $5, Timex will extend the enclosed one year limited manufacturer's warranty for an additional 4 years from date of purchase.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Watch withstands water pressure to 60 p.s.i.a. (equals immersion to 98 feet or 30 meters below sea level) acquaint yourself with the location of the four buttons that operate the watch. For $5, Timex will extend the enclosed one year limited manufacturer's warranty for an additional 4 years from date of purchase.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
If your watch is water-resistant, it will be indicated ( ) on the
INSTRUCTIONS watch face or on the caseback. SPECIAL EXTENDED SPECIAL EXTENDED • Water-Resistant watch withstands water pressure to 60 p.s.i.a. WARRANTY OFFER WARRANTY OFFER (equals immersion to 98 feet or 30 meters below sea level) and 5 YEARS FOR 5 DOLLARS dust as long as lens, push buttons and case remain intact. For $5, Timex will extend the enclosed one year limited manufac- WARNING: DO NOT PRESS THE INDIGLO NIGHT-LIGHT turer's warranty for an additional 4 years from date of purchase. BUTTON UNDER WATER AS THE WATCH WILL NOT RETAIN This 5 year warranty covers repairs on your watch under the same WATER RESISTANCE. terms and conditions as set forth in the manufacturer's warranty in this booklet. SECTION 3 – GENERAL OPERATION/FEATURES Payment can be made with AMEX, Discover, Visa or MasterCard by calling 1-800-448-4639 during normal working hours or you can First acquaint yourself with the location of the four buttons that mail a check to: Timex Extended Warranty operate the watch. These buttons are referred to throughout this P.O. Box 1676, Dept. EF instruction booklet. Little Rock, AR 72203. We will need your name, address, telephone number, date watch DIGITAL NOISE™ CONTROL BUTTONS purchased and 5 digit watch model number. Payment must be made within 30 days after date of purchase.
Please read this booklet carefully to familiarize yourself with the
operation and care of your Timex watch.
DIGITAL NOISE™ FEATURES:
• INDIGLO® night-light • NORMAL TIME - Hours, minutes, seconds, date, and day of the week. Plus, 12 or 24 hour time display. SECTION 4 – CHANGING MODES • CHRONOGRAPH - Stopwatch with 1/100 second resolution and Press MODE to advance through the various watch functions as split-time operation. shown below: • ALARM - 24-hour daily alarm. • HOURLY CHIME - (optional) Beeps every hour on the hour. • WATER-RESISTANT to 30 meters
SECTION 1 – INDIGLO® NIGHT-LIGHT
Your TIMEX watch featuring INDIGLO night-light contains a
patented electroluminescent technology (U.S. Patent Number 4,527,096). The INDIGLO night-light illuminates the entire watch SECTION 5 – HOW TO SET THE TIME AND DATE lens with a uniform bright light that offers superior readability in all low light and nighttime conditions. Simply press the appropriate When viewing the NORMAL TIME display, press the SET button button to activate. and hold for 2 seconds. The seconds display will start flashing. 1. Press START/STOP to adjust the seconds to “00” (if the seconds INDIGLO is a registered trademark of Indiglo Corporation. display exceeds “30”, then the minute will advance one unit). 2. Press MODE to change from seconds to single minutes. The minute digit will flash. 084Instr 1/17/97 3:46 PM Page 3
3. Press START/STOP to advance the minutes from 0 through 9. NOTE:
4. Press MODE to change from single minutes to tens of minutes. A) TO DEACTIVATE THE ALARM BEFORE IT SOUNDS. PRESS The tens of minutes digit will flash. START/STOP WHILE IN THE ALARM MODE. THE ALARM SYMBOL WILL DISAPPEAR. 5. Press START/STOP to advance the tens of minutes from 0 through 5. B) WHEN THE ALARM SOUNDS, IT WILL CONTINUE FOR 6. Press MODE to change from tens of minutes to hours. The APPROXIMATELY 20 SECONDS UNLESS DEACTIVATED BY hours digit will flash. PRESSING ANY BUTTON. 7. Press START/STOP to advance the hours. Look for the “P” for C) YOU MAY USE ANY OTHER WATCH MODE WHILE THE PM or the “A” for AM marking and set the hour accordingly. ALARM IS ARMED. NOTE: 12/24 HOUR TIME IS SELECTED BY PRESSING RESET/LIGHT ONLY WHEN THE HOURS MARKER IS SECTION 7 – HOW TO USE THE CHRONOGRAPH FLASHING. THE “A” OR “P” WILL DISAPPEAR WHEN THE From NORMAL TIME press MODE twice WATCH IS SET TO 24-HOUR TIME. to view the chronograph (stopwatch) 8. Press MODE to change from hours to month. The time will display. disappear and the number of the month will appear and flash. 1. Press RESET/LIGHT to set the display to 9. Press START/STOP to advance the month digit. 00'00"00. 2. Press START/STOP to start the 10. Press MODE to change from month to date. The date will flash chronograph. in the upper right corner. 3. Press START/STOP to stop the chronograph. 11. Press START/STOP to advance the date. 4. Press RESET/LIGHT to clear the chronograph. 12. Press MODE to change from date to day. The day marker will flash. SPLIT MODE: Split-time is used to mark the times of multiple finishes (first place, second place, etc.) and lap times. 13. Press START/STOP to move the day marker until it is flashing 1. Press START/STOP to start the chronograph. under the appropriate day of the week. 2. Press RESET to record lap time or first finish (digits stop 14. Press SET after adjustments are completed. advancing but the chronograph continues running. 3. Press RESET to release lap time. SECTION 6 – HOW TO SET THE HOURLY CHIME AND ALARM 4. Press RESET to record second lap time or second finish. 5. By pressing START/STOP the chronograph will stop running. HOURLY CHIME: When viewing the NORMAL TIME display, press START/STOP to set the hourly chime. The colon remains 6. Press RESET for the total elapsed time. constantly displayed when the chime is “OFF”, or flashes when the 7. Press RESET to clear the chronograph. chime is set to “ON”. TO RECORD ONLY FIRST AND SECOND PLACE FINISHES: SETTING THE ALARM: From NORMAL TIME press MODE once. This is the best way to record the finish times if there are only two “ALM” will flash on the display. competitors. 1. Press SET and hold for 2 seconds. The hour will flash. 1. Press START/STOP to start the chronograph. 2. Press START/STOP to advance the hour. In the 12-hour format, 2. Press RESET to record first place finish. The chronograph look for the “A” for AM or the “P” for PM and set the hour continues running. accordingly. 3. Press START/STOP to record (but not view) second place 3. Press MODE to change from hours to tens of minutes. The tens finish. of minutes digit will flash. 4. Press RESET to view second place finish. 4. Press START/STOP to advance the tens of minutes. 5. Press RESET to clear the chronograph. 5. Press MODE to change from tens of minutes to single minutes. NOTE: 6. Press START/STOP to advance the the single minutes. A) YOU MAY USE ANY OTHER WATCH MODE WHILE THE 7. Press SET after adjustments are completed. CHRONOGRAPH IS RUNNING. 8. Press START/STOP to activate the alarm. The alarm symbol B) IF THE INDIGLO ® NIGHT-LIGHT IS USED WHILE IN THE will appear. CHRONOGRAPH MODE, A SPLIT-TIME WILL BE DISPLAYED. TO RETURN TO THE ACTUAL ELAPSING TIME, 9. Press MODE twice to return to NORMAL TIME. PUSH THE BUTTON AGAIN. 084Instr 1/17/97 3:47 PM Page 5