Académique Documents
Professionnel Documents
Culture Documents
DESIGN SPECIFICATIONS
MATERIAL 9CR-1MO
SERVICE STD/H2S
PUMP-OUT PRESSURE (REMARKS) 582 PSI (PER SCREW) 5238 PSI BASED ON QTY 9 OF
101475983 (12C2583) INSTALLED. IT IS
RECOMMENDED TO USE AT LEAST 2 SHEAR SCREWS
AND SCREW BE AS EVENLY SPACED AS POSSIBLE.
(END)
Page 1
(Unless specified, Dim-inches, pres-psi, weight-lbs, temp-deg F)
NOTE: Values of pressure, force and operating depths presented above are based upon empirical data and theoretical calculations. These
values will vary within accepted engineering limits due to variations in material strength, dimensional tolerances and actual installed conditions.
NOTE: Halliburton makes no warranty, either expressed or implied, as to the accuracy of the data or of any calculation or opinion expressed
herein. Halliburton, Dallas, Texas, U.S.A.
Page 2