Académique Documents
Professionnel Documents
Culture Documents
page 1 of 12
Plasma Screen Flat Wall Mount
MODEL: PSW
Components:
• Wall Mount
• Dedicated Adapter Bracket (separate TD sheet available
under PLS model)
• Fasteners for wood stud and concrete installation
Accessories:
• Metal Stud Fastener Kit (accessory kit ACC 415)
ARCHITECTS SPECIFICATIONS:
The Wall Mount shall be a Peerless model ________ and shall be mounted where indicated on the plans. It shall feature
horizontal adjustment range of 4" to left or right of center. It shall be constructed of heavy gauge cold rolled steel and finished in
scratch resistant black fused epoxy. Installation and assembly shall be done in accordance with the instructions provided by the
manufacturer.
*YOU WILL NEED THE FOLLOWING CLEARANCE FROM THE TOP OF THE WALL PLATE TO THE CEILING SURFACE
IN ORDER TO SLIDE THE PLASMA (IN LANDSCAPE ORIENTATION) INTO THE WALL PLATE. 16" FOR A 42" SCREEN
AND 20" FOR A 50" SCREEN.
CEILING
B APPROXIMATELY
8" TO 32"
*16" (42")
RANGE
*20" (50")
MONITOR
9" 11"
(229 mm) (279 mm) ADAPTER
PLATE
1"
(25 mm) 34" WALL PLATE
(864 mm) 4.625"
(117 mm)
FRONT VIEW SIDE VIEW
*YOU WILL NEED THE FOLLOWING CLEARANCE FROM THE TOP OF THE WALL PLATE TO THE CEILING SURFACE
IN ORDER TO SLIDE THE PLASMA (IN LANDSCAPE ORIENTATION) INTO THE WALL PLATE. 16" FOR A 32" SCREEN.
B CEILING
APPROXIMATELY
14.8" TO 16.8" RANGE *16" (32")
MONITOR
18"
WALL PLATE
1" (457 mm)
(25 mm)
4.625"
FRONT VIEW (117 mm)
SIDE VIEW
continued on page 5
* If you are using a NEC plasma screen with a computer in the back of it, you will need to order the PSW NECPD1
to allow for the extra depth.
continued on page 6
** PSW UN-1 UN-2 & UN-4 covers many different Plasma Screen Models. Dimension “B” is given as a range of
minimum to maximum dimension.
continued on page 7