Académique Documents
Professionnel Documents
Culture Documents
1. IDENTIFICATION
PRODUCT NAME
Turalik XT 46
OTHER MEANS OF IDENTIFICATION
629
RECOMENDED USE OF THE SUBSTANCES AND RESTRICTION ON USE
This fluids is intend to lubricate parts and machinery as mentioned in the PDS (Product Data Sheets)
application recommendation.
SUPPLIER‘S DETAILS
Company Name : PERTAMINA
Address :Gedung Oil Center
JL. MH. Thamrin Kav. 55
Central Jakarta Post Code10350
Phone : 021-31907195
Facsimile : 021-31907992
EMERGENCY PHONE NUMBER
Phone : 021-31907195 (Monday-Friday, 7:00 am - 3:30 pm)
2. HAZARDS IDENTIFICATION
3. COMPOSITION/INFORMATION ON INGRIDIENTS
Turalik XT 46 1 of 4
Product Code PERTAMINA Making date : September 2010
629 Downstream Directorate – Marketing and Trading Revision date : -
Fire Extinguisher
Carbon dioxide, foam and dry powder.
Fire Extinguished Procedure
Splashing the container with water to keep the container cold. Do the splashing to remove the spill. Don’t
discard the spill to aqueduct, gutter, or clean water source.
Flash Point, COC
242 °C (ASTM D-92)
Hazardous Material Decomposition
Hazardous gases may be formed
Special Protector Equipment
The fireman have to wear Self Contained Breathing Apparatus (SCBA)
Personal Precautions
Remove all sources of ignition. Avoid contact with skin, eyes, and clothing. (see Section 8 for detailed)
Procedure note
Report the spill happened according to system and procedure decided. If the spill could be enter the aqueduct or
river, please report to authority officer as soon as possible.
Environmental Precautions
Do not flush into surface water, sanitary sewer or ground water system
Leakage and Spill Procedure
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Collect the
spilled product into suitable containers, which must be tightly sealed and properly labeled.
Handling:
When handling product in drums, safety footwear should be worn and proper handling equipment should be
used. Prevent spillages.
Storage:
Keep in a cool, dry, well-ventilated place. Use properly labeled and closable containers. Avoid direct sunlight,
heat sources, and strong oxidizing agents.
Storage temperature:
0 °C minimum to 50 °C maximum.
Recommended materials:
For containers or container linings, use: mild steel or high density polyethylene.
Unsuitable materials:
For containers or container linings, avoid : PVC
Other information:
Polyethylene containers should not be exposed to high temperatures because of possible risk distortion.
Turalik XT 46 2 of 4
Product Code PERTAMINA Making date : September 2010
629 Downstream Directorate – Marketing and Trading Revision date : -
Turalik XT 46 3 of 4
Product Code PERTAMINA Making date : September 2010
629 Downstream Directorate – Marketing and Trading Revision date : -
This product has not been tested in long term chronic exposure. All safety precautions and handling procedures
outlined in this MSDS must be followed in order to minimize exposure.
Product condition and product fitting on special application out of company guarantee; all of the using risk will
be the user responsibility. User and officer that handling this product must have the warning and product
handling procedure. It’s forbidden to change this document, except with law legacy.
Turalik XT 46 4 of 4