Académique Documents
Professionnel Documents
Culture Documents
Ver. 1.0
by
Mahmoud M. El-Kateb, Ph.D
* Project :
Concrete fcu = 40 MPa Normal Portland cement سبق الجاهاد التام- حالة أFull pres
Stressing after: 5 days , Recommended fcui = 26 MPa القطاعات الغير مشرخة- حالة بUncrack
Prestressing case: القطاعات الغير مشرخة- حالة بUncracked state سبق الجاهاد الجازئي- حالة دPartial pres
1.1
Tensile stress 2.8
2.2 at simply supported ends
* Losses in prestressing
* Project : 0
INITIAL LOSSES:
Anchorage slip losses: Clause 5-3-4-2-1
Draw-in = 6 mm
D fpset = 117.6 MPa = 8.4%
Page 4/8
Pre-stressed Concrete Slab Design according to ECP 203-2017 By: Dr. Mahmoud El-Kateb
Version 1.0
* Losses in prestressing
INITIAL LOSSES = 86 MPa = 14.6%
f= 2
fcs* = 14.7 MPa
fcsd* = 5.5 MPa
fcs = 9.2 MPa
D fpcr = 129.8 MPa = 9.3%
Page 5/8
Pre-stressed Concrete Slab Design according to ECP 203-2017 By: Dr. Mahmoud El-Kateb
Version 1.0
* Project : 0
Dimensions:
Comp. Zone
B
B= 1000 mm
a
N.A
ts ts = 250 mm
As
C Cover = 45 mm to prestressting cables Negative
Tension. Zone
Cover C = 30 mm to traditional RFT
Straining actions:
Direction of moment:
Initial stage: MDead = 100 kN.m Positive moment
Pre-stressing data:
Max. eccentricity = 80 mm
Chosen eccentricity = 80 mm
Check of stresses:
Page 6/8
Pre-stressed Concrete Slab Design according to ECP 203-2017 By: Dr. Mahmoud El-Kateb
Version 1.0
fpe = 1144 MPa > 0.5 fpu Following approximation may be used
Without contribution of traditional steel RFT:
Slab span = 10 m Perpendicular span = 9 m
hp = 0.35
mp = 0.00578
fps = 1232 MPa
Mu = 215 kN.m > Mmax Safe, use min traditional RFT
> 1.2 Mcr Safe, use min traditional RFT
Wp = 0.22 < 0.28 Ok
needed As = No need mm 2
use ### f 16
Page 7/8
Pre-stressed Concrete Slab Design according to ECP 203-2017 By: Dr. Mahmoud El-Kateb
Version 1.0
Page 8/8