Académique Documents
Professionnel Documents
Culture Documents
Specifications
C18 Marine and Marine Generator Set Engines
Media Number -RENR2387-17 Publication Date -01/08/2013 Date Updated -06/08/2013
i04383994
Camshaft
SMCS - 1210
View Image
Illustration 1 g02570316
Typical example
Table 1
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/mediasea... 11/13/2016
Service Information System Page 2 of 3
Lubricate the camshaft lobes with a 50/50 mixture of 8T-2998 Lubricant and
- - -
clean engine oil.
Maximum exhaust lobe lift at zero degrees is
1 - -
8.51521 mm (0.33524 inch).
Maximum injector lobe lift at zero degrees is
2 - -
10.33845 mm (0.40702 inch).
Maximum inlet lobe lift at zero degrees is
3 - -
9.431116 mm (0.37130 inch).
Use the following procedure to find the actual lobe lift (B) :
- - -
1. Measure the camshaft lobe height (C).
3. Subtract the base circle measurement in Step 2 from the camshaft lobe
- - -
height in Step 1. The difference is the actual lobe lift (B).
The maximum permissible difference between the actual lobe lift in Step 3
- - - and the specified camshaft lobe lift of a new camshaft is
± 0.10 mm (± 0.0034 inch).
View Image
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/mediasea... 11/13/2016
Service Information System Page 3 of 3
Illustration 2 g02551197
Table 2
Copyright 1993 - 2016 Caterpillar Inc. Sun Nov 13 15:17:36 UTC+0100 2016
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/mediasea... 11/13/2016