Académique Documents
Professionnel Documents
Culture Documents
Step
(Telco)S0/0/1-S0/0/1 (R2)
Administración de Redes de Computadoras
Martin Suarez Jacobo Jara Cruz Marlen
c. Change the encapsulation type to HDLC for any interface that is set otherwise:
ON R4 THE ENCAPSULATION IS PPP
CHANGE
Administración de Redes de Computadoras
Martin Suarez Jacobo Jara Cruz Marlen
b. Correct any IP addresses that overlap, or are set to the host or broadcast address:
The serial S0/0/0 on R1 IS BAD
SO…
Administración de Redes de Computadoras
Martin Suarez Jacobo Jara Cruz Marlen
Administración de Redes de Computadoras
Martin Suarez Jacobo Jara Cruz Marlen
2.2.3.5 Activity - Identify the Steps in the LCP Link Negotiation Process
Administración de Redes de Computadoras
Martin Suarez Jacobo Jara Cruz Marlen
Step 3: Configure R3 to use PPP encapsulation with R1, R2, and ISP.
Enter the appropriate commands on R3:
c. Exit the Internet cloud by clicking Back in the upper left corner or by pressing Alt+left arrow.
b. Enter the following commands into R3. The passwords must match for CHAP authentication:
R3(config)# username ISP secret cisco
R3(config)# interface serial0/1/0
R3(config-if)# ppp authentication chap