Vous êtes sur la page 1sur 4
Renderoc HB40 tal PA constructive solutions High-technology medium-weight concrete reinetatement mortar Uses For the reinstatement of large areas of concrete and for small, localised etch repalis. Renderoc HE40 is alkaline in nature and wil protect embodied steal rainforcement I is specifically designed for vertical and overhead repair work Advantages B_Mediun weight formuletion enabling Figh build and. thereby saving time and expanse of multiple applications BB Obviaies the need for formwore Polymer modification provides extremely ov permeability to water, carban dioxide and chlorides Excellent bond to the concrete substrate Exceptional eyatem of shvinkage compensation One component, pre-bagged to overcome sito- batched vanations I Coniains no chloride admixtures Standarde compliance Renderoc HB40 has been tested ard appreved in accordance with the Hong Kong Housing Authority ‘Specification TM1 to TN (1980), Description Fosfoc Renderoc HB40 is supplied as @ ready touse blend of cry ponders whch requires only the ste acationo! clean ‘wa'er to procure © highly consistent, madium weight ropair ‘movtar. The materials based on Portanc cements, cradad aggragatae, ichtvaight illors and chervical adeitives wich provide @ morlar wilh good handing character'sics, while rrinimising water demand. The low! waler requirement fencures fast sireng gain end long-term durabilly. Tech al support Fosroc ofers @ comprehensive cange of high performance, high quality construction products. In akition, Fosroc offers fa techrical support package lo speciers, end-users end Contractors, as well as on-site technical assistance in Tacations all ovor the werld Design criteria Ronderoe HE40 can bo applied in soctions up to 4D mm thickness in vertical lacations and up 19 30 mm thickness, in overhaad locations ina single application and without the use of formwork, Thicker aections should be buit up in layets but are sometimes possibie in single applicaicn, depending on the aclial contiguraion ol the rapair araa and the volume of exposed reinforcing steel, The matetit should not be appli at less than 10 mm thickness. Greater thicknesses than those sposilicd above can be achieved by spray application or by ino use oi formwork, Consult the local Fosroe office for further information. Properties The test methods used where in full accordance with the Hang Kong Housing Authority Speciicaticn TMI 10 TMB (1960). Spacimone ware stored at 27°C and 85% RH. The physical properties below ere typical cf the results blainad in practic. ‘esiiMethod | Destripton of Tes!_| Typical Result mi Compressive srangih| 28.25 MPa @ days 35. 0MPa @ 28 days we Flommalsrengih |

Vous aimerez peut-être aussi